Answer:
D
Step-by-step explanation:
The volume of a single coin is indeed:
Volume of a single coin = π × (radius)² × height
= 3.14 × (1.4 in)² × 0.0625 in
= 0.38465 in³ (rounded to the nearest hundredth)
Therefore, the total volume of 230 coins can be found by multiplying the volume of a single coin by the number of coins:
Total volume of 230 coins = 0.38465 in³/coin × 230 coins
= 88.47 in³ (rounded to the nearest hundredth, unrounded its 88.4695)
Hence, the answer is (D) 88.47 in³.
Verify the Pythagorean Theorem for the vectors u and v. U=(1,−1),v=(1,1) Are u and v orthogonal? Yes No Calculate the following values. ∥u∥2=∥v∥2=∥u+v∥2= We draw the following conclusion. We have verified that the conditions of the Pythagorean Theorem hold for these vectors
By verifying the Pythagorean Theorem for the vectors u and v,
∥u∥²= 2
∥v∥²= 2
∥u+v∥²= 8
u and v are not orthogonal.
We have verified that the conditions of the Pythagorean Theorem hold do not for these vectors.
To verify the Pythagorean Theorem for the vectors u and v, we need to calculate the norm of each vector and the norm of their sum.
The norm of u is √(1² + (-1)²) = √(2).
The norm of v is √(1² + 1²) = √(2).
The norm of u+v is √((1+1)² + (-1+1)²) = √(4) = 2.
Then, we can check if the Pythagorean Theorem holds by verifying if ||u+v||² = ||u||² + ||v||²:
||u||² + ||v||² = 2 + 2 = 4.
||u+v||² = 4.
Therefore, ||u+v||² = ||u||² + ||v||², and we can conclude that the Pythagorean Theorem holds for these vectors. Additionally, since the dot product of u and v is zero (1 × (-1) + 1 × (-1) = -2 + (-1) = -3), we can confirm that u and v are orthogonal.
Learn more about the Pythagorean Theorem at
https://brainly.com/question/14930619
#SPJ4
The question is -
Verify the Pythagorean Theorem for the vectors u and v.
U=(1,−1), v=(1,1)
Are u and v orthogonal?
Yes
No
Calculate the following values.
∥u∥²=
∥v∥²=
∥u+v∥²=
We draw the following conclusion.
We have verified that the conditions of the Pythagorean Theorem hold _____ (do/do not) for these vectors.
suppose you like to keep a jar of change on your desk. currently, the jar contains the following: 8 pennies 13 dimes 12 nickels 22 quarters what is the probability that you reach into the jar and randomly grab a nickel and then, without replacement, a dime? express your answer as a fraction or a decimal number rounded to four decimal places.
Step-by-step explanation:
12 nickels out of (8+13+12+22 = 55) coins 12/55 chance of nickel
now there are only 54 coins and 13 are dimes : 13/54 chance of dime
12/55 * 13/54 = 26/495 = .0525 chance
what is the result from this equation .349 +0.131 d, +2.7511,₂ - 1 (x²0.48 + 10.729 +0.8947, 1/₂)
Simplified equation is
0.131d + 1.72455 - 1(x²0.48 + 11.17635)
To find the result of the equation .349 + 0.131d + 2.7511,₂ - 1(x²0.48 + 10.729 + 0.8947, 1/₂), follow these steps:
Step 1: Rewrite the equation with correct notation:
0.349 + 0.131d + 2.7511/2 - 1(x²0.48 + 10.729 + 0.8947*1/2)
Step 2: Calculate the values inside the parentheses and fractions:
0.349 + 0.131d + 2.7511/2 - 1(x²0.48 + 10.729 + 0.8947*0.5)
Step 3: Simplify the equation:
0.349 + 0.131d + 1.37555 - 1(x²0.48 + 10.729 + 0.44735)
Step 4: Combine like terms:
0.131d + 1.72455 - 1(x²0.48 + 11.17635)
Now, you have simplified the equation. The result will depend on the value of 'd' and 'x'. You can substitute specific values for 'd' and 'x' to find the result.
Learn more about Simplification: https://brainly.com/question/2804192
#SPJ11
Which is 0. 54 converted to a simplified fraction?
For a decimal number 0.54, the converted fraction from this decimal number is written as [tex]\frac{ 54}{100} [/tex]. After simplification, the required fraction is equals to the [tex]\frac{ 27}{50} [/tex].
A fraction is defined as a part of whole. It is expressed as a quotient, where the numerator is divided by the denominator. To convert a decimal to a fraction, first we place the decimal number over its place value. For example, in 0.4, the 4 is in the tenths place, so we place 4over 10 to create the equivalent fraction, 4/10. We can simplify this fraction. To write the decimal fraction in fraction form of the digits to the right of the decimal period (numerator) and a power of 10 (denominator).
We have a decimal number, 0.54. We convert it in a simplified fraction form. As we see decimal is placed on hundredth place. So, the required fraction is 54 over 100 or we can write [tex]\frac{ 54}{100} [/tex]. Simplify this fraction, dividing the denominator and numentor by 2 then, [tex]\frac{27}{50} [/tex]. Hence, required value is [tex]\frac{27}{50} [/tex].
For more information about fraction, visit:
https://brainly.com/question/78672
#SPJ4
problem 3. student a and student b are having another lively discussion, this time about simple linear regression parameters and derivations. the students observe in their textbook the following relationship: sxy
Student A and Student B might debate the importance of understanding the derivation of these parameters, as it can deepen their comprehension of the underlying mechanics of simple linear regression and improve their ability to interpret results.
The term "sxy" usually refers to the sample covariance between two variables x and y, which is a key component in calculating the parameters of a simple linear regression model.
In simple linear regression, we try to find the best-fitting straight line that can predict the relationship between two variables. The equation of the line is typically represented as y = mx + b, where m is the slope and b is the intercept. In the context of simple linear regression, these parameters are often denoted as β0 (intercept) and β1 (slope).
The term "sxy" refers to the covariance between the two variables x and y. It measures how the two variables change together. The slope parameter (β1) in a simple linear regression can be derived using the formula:
β1 = sxy / sxx
where sxx is the variance of the variable x. Once β1 is found, the intercept (β0) can be calculated as:
β0 = y - β1 * x
In a lively discussion, Student A and Student B might debate the importance of understanding the derivation of these parameters, as it can deepen their comprehension of the underlying mechanics of simple linear regression and improve their ability to interpret results.
To learn more about linear regression, click here:
brainly.com/question/29665935
#SPJ11
In art class students are mixing black and white paint to make gray paint. Alexandra mixes 2 cups of black paint and 1 cup of white. Noah mixes 3 cups of black paint and 2 cups of white paint. Use Alexandra and Noah’s precent of black paint to determine whose gray paint will be darker.
Alexandra's mixture has a higher percentage of black paint, making it darker than Noah's mixture.
To determine whose gray paint will be darker, we can use the percentage of black paint in each mixture.
Alexandra's mixture contains 2 cups of black paint and 1 cup of white paint. This means that the percentage of black paint in her mixture is 2/(2+1) = 2/3, or about 66.67%.
Noah's mixture contains 3 cups of black paint and 2 cups of white paint. This means that the percentage of black paint in his mixture is 3/(3+2) = 3/5, or about 60%.
Based on these percentages, we can see that Alexandra's mixture has a higher percentage of black paint, making it darker than Noah's mixture. Therefore, Alexandra's gray paint will be darker than Noah's gray paint.
To learn more about quantity click on,
https://brainly.com/question/30525294
#SPJ1
Which of the factors listed below determine the width of a confidence interval? Select all that apply.The chosen level of confidence.The population mean.The relative size of the sample mean.The size of the standard error.
The factors that determine the width of a confidence interval are: The chosen level of confidence, The population mean, The relative size of the sample mean, The size of the standard error.
The factors that determine the width of a confidence interval are:
The chosen level of confidence: The higher the level of confidence required, the wider the interval will be.
The size of the standard error: A larger standard error will result in a wider interval.
The size of the sample: A smaller sample size will result in a wider interval.
The population mean does not directly determine the width of a confidence interval, but it can affect the calculation of the standard error. The relative size of the sample mean is not a factor that determines the width of a confidence interval.
Know more about confidence interval here:
https://brainly.com/question/20309162
#SPJ11
How many integers satisfy each inquality -105>x>102
A total of 209 integers from -106 to 102 are there to satisfy the inequality -105>x>102.
The inequality can be written as,
x > 102 or x < -105
If x > 102, the smallest integer that satisfies the inequality is 103, and all larger integers satisfy the inequality. If x < -105, the largest integer that satisfies the inequality is -106, and all smaller integers satisfy the inequality.
As a result, the integers that meet the inequality are as follows: -106, -105, -104,..., 101, 102. We can count the amount of integers in this list by subtracting the ends and adding one.
(102) - (-106) + 1 = 209
Therefore, there are 209 integers that satisfy the inequality.
To know more about inequalities, visit,
https://brainly.com/question/25275758
#SPJ4
In class, we have talked about the maximum entropy model. For learning the posterior probabilities Pr(y∣x)=p(y∣x) for y=1,…,K given a set of training examples (xi,yi),i=1,…,n, we can maximize the entropy of the posterior probabilities subject to a set of constraints, i.e., p(y∣xi)max s.t. −i=1∑ny=1∑Kp(y∣xi)lnp(y∣xi)y=1∑Kp(y∣xi)=1i=1∑nnδ(y,yi)fj(xi)=i=1∑nnp(y∣xi)fj(xi),j=1,…,d,y=1,…,K where δ(y,yi) is equal to 1 if yi=y, and 0 otherwise, and fj(xi) is a feature function. Let us consider fj(xi)=[xi]j, i.e., the j-th coordinate of xi. Please show that the above Maximum Entropy Model is equivalent to the multi-class logistic regression model (without regularization). (Hint: use the Lagrangian dual theory)
The above Maximum Entropy Model is equivalent to the multi-class logistic regression model as Z(xi) = ∑y=1K exp(θj fj(xi)). This is the softmax function, which is the basis for the multi-class logistic regression model.
The maximum entropy model can be formulated as follows:
Maximize: H(p) = - ∑i=1n ∑y=1K p(y|xi) ln p(y|xi)
Subject to:
∑y=1K p(y|xi) = 1, for i = 1,...,n
∑y=1K p(y|xi) δ(y,yi) fj(xi) = ∑y=1K p(y|xi) fj(xi), for j = 1,...,d and i = 1,...,n
where δ(y,yi) is the Kronecker delta function.
Using the Lagrangian dual theory, we can rewrite the objective function as:
L = - ∑i=1n ∑y=1K p(y|xi) ln p(y|xi) + ∑i=1n λi(∑y=1K p(y|xi) - 1) + ∑i=1n ∑j=1d θj(∑y=1K p(y|xi) δ(y,yi) fj(xi) - ∑y=1K p(y|xi) fj(xi))
where λi and θj are the Lagrange multipliers.
Taking the derivative of L with respect to p(y|xi) and setting it to zero, we get:
p(y|xi) = exp(θj fj(xi)) / Z(xi)
where Z(xi) is the normalization factor:
Z(xi) = ∑y=1K exp(θj fj(xi))
Substituting this into the constraint ∑y=1K p(y|xi) = 1, we get:
∑y=1K exp(θj fj(xi)) / Z(xi) = 1
which can be simplified to:
Z(xi) = ∑y=1K exp(θj fj(xi))
This is the softmax function, which is the basis for the multi-class logistic regression model.
Therefore, we have shown that the maximum entropy model with feature function fj(xi)=[xi]j is equivalent to the multi-class logistic regression model without regularization.
Know more about regression model here:
https://brainly.com/question/29657622
#SPJ11
Which of the following is a violation of one of the major assumptions of the simple regression model? a. The enor terms are independent of each other. b. Histogarn of the residuak form a bell-shaped, symmetrical curve. c. The error terms show no pattern. d. As the value of x increases, the value of the error term also increases.
Answer:
The correct answer is d. As the value of x increases, the value of the error term also increases.
Step-by-step explanation:
The simple regression model has several major assumptions, including:
Linearity: The relationship between the dependent variable and the independent variable(s) is linear.
Independence: The error terms are independent of each other.
Homoscedasticity: The variance of the error terms is constant for all levels of the independent variable(s).
Normality: The error terms are normally distributed.
No perfect multicollinearity: There is no perfect linear relationship between the independent variables.
Option d violates the assumption of independence, which states that the error terms are independent of each other and are not affected by the value of the independent variable(s). If the value of the error term increases as the value of x increases, then the error terms are not independent of the independent variable(s). This can lead to biased and unreliable estimates of the regression coefficients, and the resulting model may not accurately predict the dependent variable.
To know more about independent variable(s), refer here:
https://brainly.com/question/8285213
#SPJ11
Mr. Williams bought four Lions tickets for himself and his family. At the game bought food, water, and pop, which was $60. He spent a total of $542. How much did each ticket cost? Write an equation to represent this situation and find how much each ticket costs.
Answer:
542-60 equals 482. 482 divided by 4 is 120.5$
The base of a cuboid is a square of side 11m. The height of the cuboid is 25m. Find its Volume.
Answer: 3025 m^3.
Step-by-step explanation:
VIL ATC $650 $600 marginal cost (MC) curve, the average variable cost (AVC) curve, and the marginal revenue (MR) curve (which is also the market price) for a perfectly competitive firm that produces terrible towels. Answer the three accompanying questions, assuming that the firm is profit-maximizing and does not shut down in the short run. AVC Price $400 - MR=P $300 What is the firm's total revenue? 205 260 336 365 Quantity What is the firm's total cost? What is the firm's profit? (Enter a negative number for a loss.) $
The firm's total revenue is $104,000, its total cost is $156,000, and its profit (or loss) is -$52,000.
Finding the profit-maximizing output.
According to the information provided,
The MR (market price) $400.
Locating the point where the MC curve intersects with the MR curve at a price of $400.
Let's assume the quantity at this intersection = 260 (since 205 and 365 are not mentioned as intersecting points).
Total revenue
= Price × Quantity
= $400 × 260
= $104,000
Total cost
= ATC × Quantity
=$600 × 260
= $156,000
Profit
= Total revenue - Total cost
= $104,000 - $156,000
= -$52,000
To learn more about revenue: https://brainly.com/question/16232387
#SPJ11
what is the ratio 3:4 of 363 days
The ratio of 3:4 for 363 days is equivalent to the ratio of 1.05:1.40.
To find the equivalent ratio for 363 days in the ratio of 3:4, we can use the following steps:
Step 1: Add the ratio terms (3 + 4 = 7) to get the total number of parts.
Step 2: Divide the total number of parts by the denominator of the ratio (7 ÷ 4 = 1.75).
Step 3: Multiply the numerator and denominator of the ratio by the result from Step 2 to get the equivalent ratio.
Therefore, the equivalent ratio of 3:4 for 363 days is:
3 : 4 = 3/7 x 1.75 : 4/7 x 1.75
= 1.05 : 1.40
To know more about ratio visit:
brainly.com/question/1504221
Answer the following questions: (Without calculator)a) Let A= {3,4,5,6,7,8} and B={1,3,5,7}. How many elements has (AUB) \ (AnB)?b) What are the values of sin(pi/4) and cos(pi/3)?
(a) (AUB) \ (AnB) has a total of 4 elements.
(b) sin(pi/4) = 1/sqrt(2)
cos(pi/3) = 1/2
a) To find the elements in (AUB) \ (AnB), we first need to find AUB and AnB.
AUB is the set of all elements that are in A or B or both.
Therefore, AUB = {1,3,4,5,6,7,8}.
AnB is the set of all elements that are in both A and B.
Therefore, AnB = {3,5,7}.
To find (AUB) \ (AnB), we need to remove the elements in AnB from AUB.
Therefore, (AUB) \ (AnB) = {1,4,6,8}.
Thus, (AUB) \ (AnB) has 4 elements.
b) sin(pi/4) = 1/sqrt(2) and cos(pi/3) = 1/2.
We can remember these values using the unit circle.
At pi/4 radians, the point on the circlunit e is located at (sqrt(2)/2, sqrt(2)/2), which gives us a sine value of 1/sqrt(2) and a cosine value of 1/sqrt(2).
At pi/3 radians, the point on the unit circle is located at (1/2, sqrt(3)/2), which gives us a sine value of sqrt(3)/2 and a cosine value of 1/2.
To learn more about sets visit : https://brainly.com/question/13458417
#SPJ11
Classify triangle ABD by its sides and then by its angles.
Select the correct terms from the drop-down menus.
The sides of Triangle ABD are AB, BD, DA.
The angles of Triangle ABD are <ABD, <ADB, <BAD.
We have triangle ABD.
Now, Each triangle have three sides then sides of Triangle ABD are
AB, BD, DA
and, all angles have three angles then the angles of Triangle ABD are
<ABD, <ADB, <BAD
Learn more about Triangle here:
https://brainly.com/question/2873413
#SPJ1
In a survey, 30 people were asked how much they spent on their childrs last day were roughly bell-shaped with a mean of 543 and standard deviation of $5. Find the margin of error at a 90% confidence level.
Do not round until your final answer. Give your answer to three decimal places.
The margin of error is 1.897.
We can use the formula for margin of error:
[tex]margin of error = z (\frac{standard deviation}{\sqrt{sample size} } )[/tex]
At a 90% confidence level, the corresponding z-value is 1.645 (from a standard normal distribution table).
Plugging in the values, we get:
[tex]margin of error = 1.645 (\frac{5}{\sqrt{30} } )[/tex]
= 1.897
Rounding to three decimal places, the margin of error is 1.897.
To know more about "Margin of error" refer here:
https://brainly.com/question/29419047#
#SPJ11
A spinner is divided into 10 equally sized sectors. The sectors are numbered 1 to 10. A randomly selected point is chosen.
What is the probability that the randomly selected point lies in a sector that is a multiple of 3?
Enter your answer in the box.
Answer:3/10 or 30%
Step-by-step explanation:
the sectors are 1 through 10 meaning 1 2 3 4 5 6 7 8 9 10 out of all those numbers the only ones divisible by 3 is 3 6 9 meaning that 3 numbers out of 10 are divisible by 3. therefore being 3/10.
Find each of the following probabilities when n independent Bernoulli trials are carried out with probability of success p.(a) the probability of no successes(b) the probability of at least one success(c) the probability of at most one success(d) the probability of at least two successes(e) the probability of no failures(f) the probability of at least one failure(g) the probability of at most one failure(h) the probability of at least two failures
The probability of at least two failures is 1 minus the probability of 0 or 1 failure, which is 1 - [p^n + nqp^(n-1)].
The probability of a success in one Bernoulli trial is given by p, and the probability of a failure is q = 1 - p.
(a) The probability of no successes is (1-p)^n.
(b) The probability of at least one success is 1 minus the probability of no successes, which is 1 - (1-p)^n.
(c) The probability of at most one success is the sum of the probabilities of 0 and 1 successes, which is (1-p)^n + np(1-p)^(n-1).
(d) The probability of at least two successes is 1 minus the probability of 0 or 1 success, which is 1 - [(1-p)^n + np(1-p)^(n-1)].
(e) The probability of no failures is the same as the probability of n successes, which is p^n.
(f) The probability of at least one failure is 1 minus the probability of no failures, which is 1 - p^n.
(g) The probability of at most one failure is the sum of the probabilities of 0 and 1 failures, which is p^n + nqp^(n-1).
(h) The probability of at least two failures is 1 minus the probability of 0 or 1 failure, which is 1 - [p^n + nqp^(n-1)].
To learn more about Bernoulli visit:
https://brainly.com/question/30509621
#SPJ11
7. How many more patients who were part of the cds protocol during the last year have an identified smoking status than patients who were not included in the cds protocol, i. E. Not seen in the clinic over the last 12 months?
The number of patients who were not seen in the clinic over the last 12 months. We also need to know the proportion of patients in each group who have an identified smoking status.
Let's say that there were a total of "N" patients seen in the clinic over the last 12 months, and "M" of them were part of the CDS protocol. Let's also say that "p1" proportion of patients in the CDS group had an identified smoking status, and "p2" proportion of patients in the non-CDS group had an identified smoking status.
The number of patients in the CDS group with an identified smoking status would be M x p1, and the number of patients in the non-CDS group with an identified smoking status would be (N-M) x p2.
To calculate the difference, we can subtract the number of patients in the non-CDS group with an identified smoking status from the number of patients in the CDS group with an identified smoking status:
M x p1 - (N-M) x p2
This would give us the number of additional patients in the CDS group with an identified smoking status compared to the non-CDS group.
To know more about CDS protocol visit
https://brainly.com/question/31039244
#SPJ4
a sample of 1500 computer chips revealed that 31% of the chips do not fail in the first 1000 hours of their use. the company's promotional literature states that 29% of the chips do not fail in the first 1000 hours of their use. the quality control manager wants to test the claim that the actual percentage that do not fail is different from the stated percentage. find the value of the test statistic. round your answer to two decimal places.
The value of the test statistic, rounded off to two decimal places, is approximately 1.71.
To find the value of the test statistic, we'll use the following formula for a hypothesis test about a proportion:
Test statistic (z) = (sample proportion - null hypothesis proportion) / sqrt[(null hypothesis proportion * (1 - null hypothesis proportion)) / sample size]
Given:
Sample size (n) = 1500
Sample proportion (p-hat) = 0.31 (31% do not fail)
Null hypothesis proportion (p₀) = 0.29 (29% do not fail, as stated in the company's promotional literature)
Now, let's plug these values into the formula:
z = (0.31 - 0.29) / sqrt[(0.29 * (1 - 0.29)) / 1500]
z = (0.02) / sqrt[(0.29 * 0.71) / 1500]
z = 0.02 / sqrt[0.2059 / 1500]
z = 0.02 / sqrt[0.00013727]
z = 0.02 / 0.01172
z ≈ 1.71 (rounded to two decimal places)
So, the test statistic (z) is approximately 1.71.
More on test statistic: https://brainly.com/question/28957899
#SPJ11
Which line is perpendicular to
←→
H
F
?
A Horizontal line with points A, B, C and D is shown. Line HF is drawn perpendicularly through point A forming a right angle. Line MG is drawn perpendicularly through point B forming a right angle.
A line which is perpendicular to vector HF include the following: line BC.
What are perpendicular lines?In Mathematics and Geometry, perpendicular lines can be defined as two (2) lines that intersect or meet each other at an angle of 90° (right angles).
What is a perpendicular bisector?In Mathematics and Geometry, a perpendicular bisector is a line that bisects or divides a line segment exactly into two (2) equal halves and forms an angle that has a magnitude of 90 degrees at the point of intersection.
Based on the definition of perpendicular lines, we can reasonably infer and logically deduce that vector HF is perpendicular to line BC.
Read more on perpendicular line here: brainly.com/question/27257668
#SPJ1
3. What is the radius of the circle?
The value of radius of the circle is,
⇒ r = 7 units
Since, The circle is a closed two dimensional figure , in which the set of all points is equidistance from the center.
We have to given that;
A circle is shown in figure.
Now, We ca formulate the value of radius of the circle is,
⇒ r = 8 - 1
⇒ r = 7 units
Thus, The value of radius of the circle is,
⇒ r = 7 units
Learn more about the circle visit:
https://brainly.com/question/24810873
#SPJ1
Question 2 ( 7 Marks): Use substitution method to evaluate the following integral: I= ∫x √x²+1 dx
The value of the integral is (x²+1)^(3/2)/3 + C.
To evaluate the integral:
I = ∫x √(x²+1) dx
we can use substitution u = x²+1, which implies du/dx = 2x or dx = du/2x.
Substituting these values in the integral, we get:
I = ∫x √(x²+1) dx
Let u = x²+1, then
du/dx = 2x -> dx = du/2x
Substituting, we get:
I = ∫√u (du/2)
I = (1/2) ∫u^(1/2) du
I = (1/2) * (2/3) u^(3/2) + C
I = u^(3/2)/3 + C
I = (x²+1)^(3/2)/3 + C
Therefore, the value of the integral is (x²+1)^(3/2)/3 + C.
To learn more about substitution visit:
https://brainly.com/question/10423146
#SPJ11
Submit Question Question 15 0/1 pt1004 Details Assume that the readings at freezing on a bundle of thermometers are normally distributed with a mean of 0°C and a standard deviation of 1.00*C. A single thermometer is randomly selected and tested. Find P. the 34-percentile. This is the temperature reading separating the bottom 34% from the top 66%.
The temperature reading at the 34th percentile is -0.44°C.
To find the 34th percentile, we need to find the temperature reading such that 34% of the readings are below it and 66% are above it.
Using a standard normal table or calculator, we can find the z-score corresponding to the 34th percentile:
z = invNorm(0.34) ≈ -0.44
We can use the formula z = (x - μ) / σ to find the corresponding temperature reading x:
-0.44 = (x - 0) / 1.00
x = -0.44 * 1.00 + 0
x = -0.44
Therefore, the temperature reading at the 34th percentile is -0.44°C.
Temperature is a number that is used to quantify how hot or cold a specific location, object, etc. is. The average kinetic energy of a system is measured by its temperature.
To learn more about temperature visit:
https://brainly.com/question/11464844
#SPJ11
Which of the following is NOT true:
A) It is possible to have Pr(A)=1, Pr(B)= and Pr(A u B)=1.
B) If A is an event such that Pr(A)=1, then A'=Ø.
C) Pr(A/B)=Pr(B|A) if and only if Pr(A)=Pr(B)>0.
D) Pr(A/B)=MMABIA) assuming that both Pr(A) and Pr(B) are greater than 0.
E) none of these
The set statement that is NOT true is option B) If A is an event such that Pr(A)=1, then A'=Ø.
What is the set about?In terms of option A, one can have Pr(A)=1, Pr(B)=0, and Pr(A u B)=1. This outcome is true in cases where A and B are not mutually exclusive occurrences, telling us that they have the potential to happen concurrently.
Therefore, If Pr(A) is equal to Pr(B) and both are greater than zero, then Pr(A/B) is one that is equivalent to Pr(B|A). Bayes' theorem, which establishes a connection between conditional probabilities, is an accurate hold to this.
Learn more about set from
https://brainly.com/question/13458417
#SPJ1
A hyperbola has its center at 0,0, a vertex of 0,31, and an asymptote of y=31/28x. Find the equation that describes the hyperbola.
The equation of the hyperbola is x² / 784 - y² / 961 = 1
Given data ,
The equation of a hyperbola in standard form with center at (h, k), horizontal axis, and vertical axis is given by:
(x - h)² / a² - (y - k)² / b² = 1
where (h, k) is the center of the hyperbola, "a" is the distance from the center to the vertices along the horizontal axis, and "b" is the distance from the center to the vertices along the vertical axis.
We have h = 0 and k = 0 since the hyperbola's centre is (0, 0). The vertical axis vertex lies at (0, 31), hence the distance between the centre and the vertex is given by b = 31.
y = (31/28)x is the equation for the hyperbola's asymptote
The asymptote's slope should be equal to b/a, where "a" denotes the distance between the centre and the vertices along the horizontal axis
31/28 = 31/a
Solving for "a", we get:
a = 28
x² / 784 - y² / 961 = 1
Hence , equation is x² / 784 - y² / 961 = 1
To learn more about hyperbola click :
https://brainly.com/question/12919612
#SPJ1
From question 1, recall the following definition. Definition. An integer n is divisible by 5 if there exists an integer k such that n= 5k. (a) Show that the integer n = 45 is divisible by 5 by verifying the definition: above. (b) Show that the integer n= -110 is divisible by 5 by verifying the definition above. (c) Show that the integer n = 0 is divisible by 5 by verifying the definition above. = (d) Use a proof by contradiction to prove the following theorem: Theorem 1. The integer n = 33 is not divisible by 5.
An integer is a whole number that can be either positive, negative, or zero. In mathematics, a theorem is a statement that has been proven to be true using logic and reasoning. Theorem 1 states that the integer n = 33 is not divisible by 5.
To show that an integer n is divisible by 5, we need to find an integer k such that n = 5k. Let's apply this definition to each of the given integers.
(a) To show that n = 45 is divisible by 5, we need to find an integer k such that n = 5k. We can see that k = 9 satisfies this condition since 5k = 5(9) = 45. Therefore, 45 is divisible by 5.
(b) To show that n = -110 is divisible by 5, we need to find an integer k such that n = 5k. We can see that k = -22 satisfies this condition since 5k = 5(-22) = -110. Therefore, -110 is divisible by 5.
(c) To show that n = 0 is divisible by 5, we need to find an integer k such that n = 5k. We can see that k = 0 satisfies this condition since 5k = 5(0) = 0. Therefore, 0 is divisible by 5.
(d) To prove Theorem 1, we will use proof by contradiction. Let's assume that n = 33 is divisible by 5, which means there exists an integer k such that n = 5k. Then, we have 33 = 5k, which implies that k = 6.6. However, k must be an integer according to the definition of divisibility. Therefore, we have reached a contradiction, and our assumption that n = 33 is divisible by 5 must be false. Hence, Theorem 1 is proven.
What is integers? :https://brainly.com/question/929808
#SPJ11
The Gulf Trading Company plans to purchase an embroidery machine for their sewing unit. Two kinds of machines are available on the market (A & B). A 4-member team of experts surveyed the market, visited and analyzed both the versions and determined which one to choose based on the variance test, based on the following performance analysis data.: Machine A Machine B 33 26 22 35 15 20 25 40 21 33 50 24 42 40 43 45 35 26 17 22 Which machine the company would prefer using variance (statistical tool). Justify your answer
To determine which embroidery machine to purchase, we can compare the variances of the two machines using a variance test. The null hypothesis is that the variances are equal, and the alternative hypothesis is that they are not equal.
We can use the F-test to compare the variances:
[tex]F= \frac{s1^{2} }{s2^{2} }[/tex]
where [tex](s1)^{2}[/tex] and [tex](s2)^{2}[/tex] are the sample variances of machines A and B, respectively.
First, we need to calculate the sample variances:
[tex]s1^2 = ((33-28.55)^2 + (26-28.55)^2 + ... + \frac{(22-28.55)^2) }{20-1} = 150.96[/tex]
[tex]s2^2 = ((15-29.7)^2 + (20-29.7)^2 + ... + \frac{(22-29.7)^2) }{20-1} = 132.93[/tex]
Next, we calculate the F-statistic:
[tex]F= \frac{(s1)^{2} }{(s2)^{2} } = \frac{150.96}{132.93} = 1.135[/tex]
The degrees of freedom for the numerator and denominator are 19 and 19, respectively.
Using an F-table or calculator, we can find that the critical F-value at a 5% level of significance and 19 degrees of freedom for both the numerator and denominator is 2.14.
Since the calculated F-value of 1.135 is less than the critical F-value of 2.14, we fail to reject the null hypothesis that the variances are equal. Therefore, there is not enough evidence to suggest that the variances of machines A and B are significantly different.
Based on this analysis, we cannot make a recommendation for which embroidery machine to purchase based on variance alone. We may need to consider other factors such as cost, quality of embroidery, ease of use, and maintenance requirements before making a final decision.
To know more about "Null hypothesis" refer here:
https://brainly.com/question/30535681#
#SPJ11
Part B:What will be the area, in square inches, of the piece of sheet metal after both sections are cut and removed?
The area of the piece of sheet metal after both sections are cut and removed will be 6336 square inches.
How do we calculate?
We have the breadth of rectangle B = 144 - 36 - 24 - 36
breadth of rectangle = 48 inches
The area of rectangle B = length × breadth
area of rectangle B = 36 × 48
area of rectangle B= 1728 square inches
Area of rectangle WVTX = length × breadth
Area of rectangle WVTX = 24 × 24
Area of rectangle WVTX = 576 square inches
Area of rectangle PQRS = PQ × PS
Area of rectangle PQRS= 60 × 144
Area of rectangle PQRS = 8640 square inches
Therefore the area of the piece of sheet metal after both sections are cut and removed =8640 - ( 1728 + 576 )
area = 8640 - 2304
area= 6336 square inches
Learn more about area at:
https://brainly.com/question/2607596
#SPJ1