The bond between oxygen and hydrogen in water (H2O) is a polar bond because oxygen is more electronegative than hydrogen, causing the electrons to be unevenly shared and resulting in a partial negative charge on the oxygen and a partial positive charge on the hydrogen.
The bond between nitrogen atoms in diatomic nitrogen (N2) is a nonpolar bond because the atoms are identical and therefore have an equal pull on the shared electrons, resulting in an even distribution of charge. The statement "electrons are not equally shared by the atoms in a covalent bond, one atom has a partial negative charge, and the other atom has a partial positive charge" describes a polar bond, while the statement "electrons are equally shared between atoms in a covalent bond" describes a nonpolar bond.
The strongest covalent bonds are quadruple covalent bonds. The bond gets stronger the more bonding partners there are.
The sharing of electrons between two species creates a covalent connection.
They frequently exist between molecules with comparable electronegativities.
The strength of the bonds between the atoms is based on their quantity.
Learn more about covalent bond here
https://brainly.com/question/19382448
#SPJ11
Between the same two atoms, the strongest covalent bond is the ___ bond and the weakest is the ___ bond.
Between the same two atoms, the strongest covalent bond is the triple bond and the weakest is the single bond.
A single bond is formed when two atoms share one pair of electrons. This type of bond is the most stable and secure of all covalent bonds as the shared electrons are firmly held in place by the two atoms. The weakest covalent bond between two atoms is a triple bond. A triple bond is formed when two atoms share three pairs of electrons. This type of bond is less stable than a single bond as the three shared electrons are more loosely held and may be more easily lost or broken.
To learn more about covalent bond click here https://brainly.com/question/10777799
#SPJ11
How do we know the energy of the n = 1 level of the H atom?
1. It can be calculated from the speed of light and Planck's constant.
2. It is the energy necessary to remove the e- from the H atom.
3. It was told to Bohr when he was abducted by aliens.
The energy of the n = 1 level of the hydrogen (H) atom can be calculated using mathematical formulas that involve the speed of light and Planck's constant. This energy level is also known as the ground state of the atom, which is the lowest energy level that an electron can occupy.
The energy of this level is crucial for understanding the behavior of electrons within the atom and for studying atomic structure.
To be more specific, the energy of the n = 1 level of the H atom can be calculated using the Rydberg formula, which involves the Rydberg constant, the speed of light, and Planck's constant. This formula is based on the concept of atomic spectra, which refers to the light emitted or absorbed by an atom due to the energy changes of its electrons. By analyzing the spectral lines of hydrogen, scientists have been able to determine the energy levels of its electrons, including the ground state.
Additionally, the energy of the n = 1 level of the H atom is also related to the ionization energy, which is the energy required to remove an electron from the atom completely. This ionization energy is equal to the energy of the ground state of the H atom, as it takes exactly this amount of energy to remove an electron from the lowest energy level.
In conclusion, the energy of the n = 1 level of the H atom is a fundamental concept in atomic physics, and can be calculated using mathematical formulas based on the speed of light and Planck's constant. It is also related to the ionization energy and has been determined through spectral analysis of the atom. The idea of aliens telling Bohr the answer is purely fictional and has no scientific basis.
learn more about Planck's constant here: brainly.com/question/27389304
#SPJ11
identify the best reagents to convert 1-hexyne into (e)-1,2-dibromo-1-hexene.select answer from the options belowxs br2, ccl41 equiv hbr, roorxs hbr1 equiv. br2, ccl41 equiv hbr
The best reagents to convert 1-hexyne into (e)-1,2-dibromo-1-hexene are 1 equiv. Br2 in CCl4, followed by NaOH to convert the mixture of (Z)- and (E)-isomers to the desired (E)-isomer.
This reaction is called the Vicinal Dibromination reaction. Option A: xs Br2 in CCl4 is a good choice of reagents, but it will give a mixture of (Z)- and (E)-isomers. Option B: 1 equiv. HBr will result in the formation of (Z)-1-bromo-1-hexene. Option C: ROOR is a radical initiator and will not result in the desired product.
To know more about different reagents and isomers : https://brainly.com/question/29713522
#SPJ11
Which best describes why NH4+ can form an ionic bond with CL-?
The loss of one electron and ionic bond gives the ammonium ion ([tex]NH_4^{+}[/tex]) a positive charge, whereas the gain of one electron gives the chloride ion [tex](cl^{-} )[/tex] a negative charge. The two ions can form an ionic connection because their opposing charges are attracted to one another.
Positively charged cations and negatively charged anions are created when one or more electrons are transferred from one atom to another to form an ionic connection. A crystal lattice structure is subsequently created as a result of the cations and anions' mutual attraction.
The nitrogen atom in ([tex]NH_4^{+}[/tex]) contributes a lone pair of electrons to a hydrogen atom in the case of ([tex]NH_4^{+}[/tex]) and [tex](cl^{-} )[/tex], resulting in the production of a positively charged ammonium ion. In contrast, the chloride ion advances.
Learn more about ionic bond visit: brainly.com/question/13526463
#SPJ4
Write an equation for each of the described reactions. Include subscripts, and state of matter notation as needed.
2Li(s) + 2H₂O(l) → 2LiOH(aq) + H₂(g)
Solid lithium reacts with water to produce a solution of lithium hydroxide and hydrogen gas.
2Na(s) + Cl₂(g) → 2NaCl(s)
Solid sodium reacts with gaseous chlorine to produce solid sodium chloride.
CaCO₃(s) → CO₂(g) + O₂(g) + Ca(s)
Solid calcium carbonate breaks down into carbon dioxide gas, oxygen gas, and solid calcium.
FeSO₄(s) + BaCl₂(aq) → BaSO₄(s) + FeCl₂(aq)
Solid iron(II) sulfate and a solution of barium chloride react to form solid barium sulfate and a solution of iron (II) chloride.
HCl(aq) + NaOH(aq) → H₂O(l) + NaCl(aq)
Solutions of hydrochloric acid and sodium hydroxide react to produce liquid water with sodium chloride dissolved in it.
These are the balanced chemical equations for the given reactions. Each equation shows the reactants on the left side of the arrow and the products on the right side of the arrow. Subscripts and state of matter notation are used as needed to indicate the physical properties of each substance involved in the reaction.
These chemical equations represent different types of reactions, including synthesis, decomposition, single displacement, double displacement, and acid-base neutralization. By balancing the equations, we ensure that the number of atoms of each element is the same on both sides of the equation, indicating that the law of conservation of mass is being obeyed. These equations are useful in predicting the products of a reaction and determining the amount of reactants and products involved.
The complete question is
Write an equation for each of the described reactions. Include subscripts, and state of matter notation as needed. Don't forget about the diatomic elements! *Complete this on a separate sheet of lined paper and attach this to the GCR assignment.
1. Solid lithium reacts with water to produce hydrogen gas and a solution of lithium hydroxide.
2. Solid sodium reacts with gaseous chlorine to produce sodium chloride.
3. Solid calcium carbonate breaks down into carbon dioxide gas, oxygen gas, and solid calcium.
4. Solid iron(II) sulfate and a solution of barium chloride react to form solid barium sulfate and a solution of iron (II) chloride.
5. Solutions of hydrochloric acid and sodium hydroxide react to produce liquid water with sodium chloride dissolved in it.
To know more about the Reactions, here
https://brainly.com/question/19338942
#SPJ1
please also write out how the hydronium and hydroxide concentrations were calculated for solution 4 in part b.
In solution 4 of part b, both the hydronium concentration and hydroxide concentration are 1 M due to the neutralization reaction between HCl and NaOH. The initial concentrations of H₃O⁺ and OH⁻ were 0.1 M, but they reacted to form water and resulted in equal final concentrations of 1 M for both ions.
To calculate the hydronium and hydroxide concentrations for solution 4 in part b, we need to first understand the equation for the reaction that occurred.
The equation given is: HCl + NaOH -> NaCl + H₂O
This tells us that one mole of HCl reacts with one mole of NaOH to produce one mole of NaCl and one mole of water.
Based on this equation, we know that the initial concentration of hydroxide ions (OH-) in solution 4 is equal to the initial concentration of sodium hydroxide (NaOH), which was given as 0.1 M.
Next, we need to determine the concentration of hydronium ions (H₃O⁺). Since HCl is a strong acid, it completely dissociates in water to produce H₃O⁺ and Cl⁻ ions. Therefore, we can assume that the initial concentration of H₃O⁺ is equal to the initial concentration of HCl, which was also given as 0.1 M.
Now, let's consider what happens when the HCl and NaOH are mixed together. They react to form NaCl and water, which means that the concentrations of H₃O⁺ and OH⁻ will change.
From the equation, we can see that the reaction consumes one mole of HCl and one mole of NaOH. This means that the final concentration of HCl and NaOH will both be zero.
To determine the final concentration of OH-, we need to use the fact that the reaction produces one mole of water for every mole of NaOH that reacts. Therefore, the final concentration of OH⁻ will be equal to the initial concentration of NaOH (0.1 M) divided by the volume of the solution.
If we assume that the volume of the solution is 100 mL (as stated in the question), then the final concentration of OH- will be:
[OH⁻] = 0.1 M / 0.1 L = 1 M
Finally, we can use the fact that the concentration of H₃O⁺ and OH⁻ must be equal in a neutral solution to determine the final concentration of H₃O⁺.
Since the final concentration of OH⁻ is 1 M, we know that the final concentration of H₃O⁺ must also be 1 M.
To know more about the hydronium & hydroxide concentrations refer here :
https://brainly.com/question/29286376#
#SPJ11
Assuming the octet rule is obeyed; how many covalent bonds will a nitrogen atom fom t give a formal charge of zero?
Assuming the octet rule is obeyed and have a formal charge of zero, a nitrogen atom typically forms three covalent bonds with other atoms.
These bonds can be with hydrogen atoms or other elements, and the arrangement of shared electrons ensures a stable electron configuration for all atoms involved.
A nitrogen atom forms covalent bonds to achieve a formal charge of zero by adhering to the octet rule. Nitrogen has five valence electrons in its outer shell, requiring three additional electrons to complete its octet. By sharing three electrons with other atoms through covalent bonding, nitrogen can reach a stable electron configuration.
Covalent bonds involve the sharing of electrons between atoms to satisfy the octet rule. Nitrogen can form three covalent bonds, such as in ammonia (NH3), where it shares one electron with each of the three hydrogen atoms. In this case, each hydrogen atom contributes one electron, and nitrogen contributes three electrons, creating a stable, shared electron arrangement with a formal charge of zero for nitrogen.
Similarly, nitrogen can form covalent bonds with other elements to achieve a formal charge of zero. For example, in nitrogen gas (N2), two nitrogen atoms share three electrons each, resulting in a triple bond with a total of six shared electrons. Each nitrogen atom in this molecule achieves a complete octet and has a formal charge of zero.
To know more about octet rule, refer to the link below:
https://brainly.com/question/30779148#
#SPJ11
Which factor below does not contribute to the value of the standard reduction potential for the process : Na*(aq) + e- → Na(s) a) Enthalpy change for electron attachment to Na(g) b) Enthalpy change for atomization of Na(s) c) First ionization energy of Na(g) d) Enthalpy change for hydration of Na(g)
The factor that does not contribute to the value of the standard reduction potential for the process Na×(aq) + e⁻ ⇒ Na(s) is b) Enthalpy change for atomization of Na(s).
The standard reduction potential only takes into account the enthalpy change for electron attachment to Na(g), the first ionization energy of Na(g), and the enthalpy change for hydration
The tendency of a chemical species to become reduced is referred to as standard reduction potential. Volts are measured under typical circumstances.
If a species' reduction potential is negative, it will be simple for it to lose electrons and become oxidised.
Similar to this, if a species has a positive reduction potential, it will be reduced because it will be simple to gain electrons.Compared to zinc ions, the copper ions will be decreased more quickly.
The accurate assertion is therefore that the half-reaction will be reduced more frequently the larger the standard reduction potential.
Learn more about standard reduction potential here
https://brainly.com/question/8739272
#SPJ11
In the Galvanic Series which element is listed as the most noble?
A) zinc
B) copper
C) steel
D) magnesium
E) carbon
The Galvanic Series is a list of metals and alloys arranged in order of their relative nobility or reactivity in seawater or other electrolytic solutions. The most noble metals are at the top of the series and the most active or least noble are at the bottom.
The general, noble metals like gold, platinum, and silver are highly resistant to corrosion and oxidation, while less noble metals like iron and zinc are more reactive and prone to corrosion. the Galvanic Series, the most noble metal is actually not one of the options listed in the question. The top three most noble metals are platinum, gold, and palladium, followed by silver, titanium, and copper. Zinc, steel, magnesium, and carbon are all less noble and more reactive than these metals. Therefore, the correct answer to the question would be "none of the above." It is important to note that the relative nobility of metals can vary depending on the specific environment and conditions, and other factors such as the presence of other metals and the pH level of the solution can also affect their reactivity.
learn more about electrolytic here.
https://brainly.com/question/29771118
#SPJ11
What is true of a molecule of gaseous hydrogen (H2)?
The true statement of a molecule of gaseous hydrogen is It has no net charge. Therefore the correct option is option A.
A covalently bound pair of hydrogen atoms make up a gaseous hydrogen molecule (H2), which is a substance. This indicates that in order to create a stable molecule, the two hydrogen atoms share an electron.
H2 is the lightest and most prevalent element in the universe and is a diatomic gas at room temperature and atmospheric pressure. It has no colour, no smell, and is non-toxic.
Highly flammable H2 gas can be used as fuel for a variety of devices, including fuel cells, IC engines, and rockets. Another way to create H2 gas is through the electrolysis of water, reforming of natural gas, or gasification of coal. Therefore the correct option is option A.
For such more question on molecule:
https://brainly.com/question/30375112
#SPJ11
The following question may be like this:
What is true of a molecule of gaseous hydrogen (H2)? Multiple choice question.
It has no net charge.It has a partial positive charge.It has one partial positive charge and one partial negative charge which are balanced.Rank the following bonds and interactions in order from strongest to weakest starting with the strongest at the top. (assume that these bonds/interactions are occurring in a living cell)
Here is the ranking of bonds and interactions in a living cell from strongest to weakest: Covalent bonds, Ionic bonds, Hydrogen bonds, Van der Waals interactions.
The strongest to weakest links and interactions in a live cell are listed below:
The strongest sort of chemical link is a covalent bond, which involves sharing electrons between atoms. The production of positively and negatively charged ions that are attracted to one another results in the formation of ionic bonds, which are formed when electrons are transferred between atoms. Hydrogen bonds are relatively weak interactions that take place between an electronegative atom (such as fluorine, oxygen, or nitrogen) and a hydrogen atom that is covalently bound to it. Van der Waals interactions: These are atom-to-atom or molecule-to-molecule weak, fleeting attractivities caused by shifting electron concentrations around the atoms.For such more question on Ionic bonds:
https://brainly.com/question/977324
#SPJ11
The following question may be like this:
What is the order of bonds and interactions from the strongest to the weakest?
(Covalent, Van der Waals interaction, ionic bond, hydrogen bond)
look up the chemical formula for citric acid and determine if it is strong or weak. then complete the sentence below. when entering the molecular formula, enter only integer values. if an element is not present in the formula enter a zero in the corresponding box
The chemical formula for citric acid is C₆H₈O₇. Citric acid is a weak acid.
Sentence: Citric acid has a chemical formula of C₆H₈O₇ and is classified as a weak acid.
Citric acid is a weak organic acid, with a molecular formula of C₆H₈O₇. It is found naturally in citrus fruits and many other fruits and vegetables, and is commonly used as a food additive and flavoring agent.
Citric acid is classified as a weak acid because it does not completely dissociate in aqueous solution. When citric acid dissolves in water, some of the molecules donate a proton (H⁺) to water molecules to form hydronium ions (H₃O⁺), while others remain as undissociated molecules. The equilibrium between the undissociated molecules and the hydronium ions can be described by the following equation:
C₆H₈O₇ + H₂O ⇌ C₆H₇O₇⁻ + H₃O⁺
In this equation, C₆H₈O₇ represents undissociated citric acid, C₆H₇O₇⁻ represents the citrate ion, and H₃O⁺ represents hydronium ions.
The dissociation of citric acid is incomplete, meaning that only a fraction of the citric acid molecules dissociate in aqueous solution. The strength of an acid is related to the extent of dissociation, so weak acids like citric acid have a relatively small dissociation constant (Ka) compared to strong acids.
The Ka for citric acid is approximately 8.4 × 10⁻⁴ at 25°C, indicating that only a small fraction of the citric acid molecules dissociate in aqueous solution. This is why citric acid is classified as a weak acid.
To know more about the citric acid refer here :
https://brainly.com/question/29857075#
#SPJ11
A steel reaction vessel of a bomb calorimeter has a volume of 0.178 L, is charged with oxygen gas to a pressure of 53.3 atm at 19.1oC. Calculate the moles of oxygen in the reaction vessel
The ideal gas law can be used to determine how many moles of oxygen are present in the reaction vessel. PV = nRT, where P is pressure, V is volume, n is moles, R is gas constant, and T is temperature, is the formula for the ideal gas law.
We obtain 53.3 atm*0.178 L = n*0.0821 L*atm/mol*292.1K by plugging in the specified variables. We arrive at n = 0.0087 moles of oxygen after solving for n.
Therefore, at the specified pressure and temperature, the reaction vessel contains 0.0087 moles of oxygen.
Learn more about oxygen at:
https://brainly.com/question/13370320
#SPJ1
carbon diffuses in iron via an interstitial mechanism--for fcc iron from one octahedral site to an adjacent one. in section impurities in solids, we note that two general sets of point coordinates for this site are 0 1/2 1 and 1/2 1/2 1/2. select the family of crystallographic directions in which thich this diffusion of carrbon in fcc iron takes place
Carbon diffusion in FCC iron occurs through interstitial diffusion along the <111> crystallographic directions. This is a significant process in steel production that affects material strength and other mechanical properties. Knowledge of crystallographic directions is crucial in controlling material properties.
In FCC iron, carbon diffuses via an interstitial mechanism from one octahedral site to an adjacent one. The octahedral sites are located at the center of the face of the FCC unit cell, and there are two general sets of point coordinates for this site: (0, 1/2, 1) and (1/2, 1/2, 1/2).To determine the family of crystallographic directions in which carbon diffuses in FCC iron, we need to consider the symmetry of the crystal structure. FCC iron has cubic symmetry, and it has four three-fold symmetry axes that pass through the centers of the faces of the unit cell. The <111> family of crystallographic directions coincides with these symmetry axes, and they are the most closely packed directions in the FCC structure.Therefore, carbon diffusion in FCC iron takes place along the <111> family of crystallographic directions. This diffusion mechanism is known as interstitial diffusion because the carbon atoms occupy interstitial sites in the iron lattice. The diffusion of carbon in FCC iron is an important process in the production of steel, as it influences the material's strength and other mechanical properties. Understanding the crystallographic directions in which diffusion occurs is essential for controlling the properties of the material.For more such question on crystallography
https://brainly.com/question/28301570
#SPJ11
The Bromination of p-chlorophenyl isopropyl ether is to be done in a 20 liter batch reactor. Determine the time for a mixture containing 0. 02 mol of p- chlorophenyl isopropyl ether and 0. 018 mol of bromine to reach 65% conversion of p-chlorophenyl isopropyl ether given the following stoichiometry and rate expression 2A + B-> 2 C where A = p-chlorophenyl isopropyl ether, B = bromine and C = monobrominated product k1 = 2 lit/mol-min and k2 = 9200 (lit/mol)^2/min
The chemical reaction known as bromination of p-chlorophenyl isopropyl ether acts replacing a hydrogen atom on the aromatic ring of the ether molecule with a bromine atom. A Lewis acid catalyst, like aluminum bromide (AlBr₃), is typically used to initiate the reaction.
The rate law for the given reaction is:
Rate =[tex]k_1[A][B]^2[/tex]
According to the given stoichiometry, 2 moles of A respond with 1 mole of B to give 2 moles of C. In this manner, 0.02 mol of A will respond with 0.01 mol of B to give 0.02 mol of C.
We need to figure out how long it takes to convert 65 percent of A, which means that 35 percent of A won't react. As a result, at a conversion rate of 65%, the concentration of A will be:
0.35 ˣ 0.02 = 0.007mol/L
We can involve the incorporated rate regulation for the second-request response to make the opportunity taken for the given change:
t = [tex]1/((k_1/k_2)[/tex] ˣ [tex](1/[A] - 1/[A]0))[/tex]
Where,
[tex]k_1 = 2 L/mol-mink_2 = 9200 (L/mol)^2/min[/tex]
[A]0 = initial concentration of A = 0.02mol/L
[A] = concentration of A at 65% conversion = 0.007mol/L
Plugging in the values, we get:
t = [tex]1/((2/9200)[/tex] ˣ [tex](1/0.007 - 1/0.02))[/tex] = [tex]145.4[/tex]min
Therefore, the time taken for the given reaction to reach 65% conversion of p-chlorophenyl isopropyl ether is approximately 145.4 minutes.
To learn more about hydrogen atoms here
https://brainly.com/question/30886690
#SPJ4
You have 800,000 atoms of a radioactive substance. After 3 half-lives have past, how
many atoms remain?
Remember that you cannot have a fraction of an atom, so round the answer to the
nearest whole number.
The half life of a radioactive material is inversely proportional to the decay constant and it is completely independent of the amount of it present initially. Here the number of atoms which remain after the decay of radioactive material is
The half-life period of a radionuclide is the time required for the decay of the one half of the amount of the species. The half life period is a characteristic of a radionuclide. The half-lives of different radionuclides vary from fractions of seconds to billions of years.
The amount remaining after 3 half-lives can be obtained as:
N = N₀ / 2ⁿ
N = 800000 / 2³
N = 800000 / 8
N = 100,000
To know more about half-lives, visit;
https://brainly.com/question/27755919
#SPJ1
Which substance(s) could be formed during the incomplete combustion of a hydrocarbon?
I. Carbon
II. Hydrogen
III. Carbon monoxide
A. I only
B. I and II only
C. I and III only
D. II and III only
The correct answer would be C) I and III only, as both carbon and carbon monoxide could be formed during the incomplete combustion of a hydrocarbon.
During incomplete combustion of a hydrocarbon, not all of the carbon and hydrogen atoms combine with oxygen to form carbon dioxide and water. This results in the formation of various other substances, such as carbon monoxide, soot, and other carbon-containing particles. Out of the given options, both carbon and carbon monoxide could be formed during incomplete combustion. Carbon is formed when there is insufficient oxygen to convert all of the carbon in the hydrocarbon into carbon dioxide. Carbon monoxide, on the other hand, is formed when there is not enough oxygen to complete the combustion of the hydrocarbon, but still enough to oxidize some of the carbon and hydrogen. Carbon monoxide is a toxic gas that can be harmful to human health and the environment. During the incomplete combustion of a hydrocarbon, the substances that could be formed are Carbon (I) and Carbon monoxide (III). Incomplete combustion occurs when there is insufficient oxygen supply, resulting in the production of these two substances, along with water. Carbon appears as soot or particulate matter, while Carbon monoxide is a toxic, colorless, and odorless gas. Hydrogen (II) is not formed during the combustion process, as it is already a component of the hydrocarbon itself.
Learn more about hydrocarbon here
https://brainly.com/question/11964417
#SPJ11
When 1 mole of N2(g) reacts with O2(g) to form NO2(g) according to the following equation, 66. 4 kJ of energy are absorbed.
N2(g) + 2 O2(g) When 1 mole of N2(g) reacts wi 2 NO2(g)
Is this reaction endothermic or exothermic? endothermic exothermic
What is the value of q? kJ
The value of q is 66.4 kJ.
The given chemical equation is:
[tex]\mathrm{N_2(g) + 2O_2(g) \rightarrow 2NO_2(g)} \qquad \Delta H = +66.4 \text{ kJ/mol}[/tex] = 66.4 kJ/mol
Since the enthalpy change (ΔH) is positive, it means that heat is absorbed during the reaction, indicating that this reaction is endothermic.
The amount of heat absorbed (q) can be calculated using the following formula:
q = nΔH
where n is the number of moles of reactant that undergo the reaction.
For this reaction, 1 mole of [tex]\mathrm{N_2}[/tex]reacts, so n = 1.
Therefore, the amount of heat absorbed is:
q = (1 mol) × (66.4 kJ/mol) = 66.4 kJ
So, the value of q is 66.4 kJ.
Learn more about heat absorbed
https://brainly.com/question/30836915
#SPJ4
How do you do this question? i need step by step
The balanced cell reaction equation is;
Zn(s) + Pb^2+(aq) ----->Zn^2+(aq) + Pb(s)
What is the balanced cell reaction equation?An electrochemical cell's balanced oxidation and reduction half-reactions are represented by a chemical equation known as a balanced cell reaction equation. In other words, it illustrates the chemistry occurring at the anode and cathode of the cell.
We can see that in the cell that we have in the question, the anode is the zinc half cell while the cathode is the lead half cell. Thus electron is lost in the zinc half cell and gained in the lead half cell.
Learn more about cell equation:https://brainly.com/question/28329395
#SPJ1
Lauryl alcohol is a nonelectrolyte obtained from coconut oil and is used to make detergents. A solution of 6. 40 g of lauryl alcohol in 0. 200 kg of benzene freezes at 4. 6 ∘C. What is the approximate molar mass of lauryl alcohol?
Lauryl alcohol is a nonelectrolyte obtained from coconut oil and is used to make detergents. A solution of 6. 40 g of lauryl alcohol in 0. 200 kg of benzene freezes at 4. 6 ∘C. 183 (g/mol) is the molar mass of lauryl alcohol.
The molar mass of something specific divided by the amount present in the sample gives the molecular weight of a compound. It is a substance's bulk attribute rather than a molecular one. The compound's molar mass represents the average of all of its occurrences.
Which, as a result of the existence of isotopes, commonly change in mass. Most frequently, molar mass is calculated using quality atomic weights, which is a terrestrial average therefore a function of the proportion of each of the constituent atoms' isotopes on earth.
Tb - Ts = Kml\Mms
M =6. 40×5\0.1(5.5-4.6) = 183 (g/mol)
To know more about molar mass, here:
https://brainly.com/question/22997914
#SPJ1
Fruits such as apples, oranges, and bananas are all classified into which group of plants?
in this experiment, the reaction of phenylmagnesium bromide and benzophenone formed triphenylmethanol via nucleophilic addition. the same product can also be made through the nucleophilic substitution reaction of ethylbenzoate with phenylmagnesium bromide. write out mechanisms for both reactions and explain why there is different reactivity.
Both the reactions of phenylmagnesium bromide and benzophenone and the reaction of ethyl benzoate with phenylmagnesium bromide gives triphenylmethanol but their reactivity is different due to the nature of the electrophilic species.
1) Reaction of phenylmagnesium bromide and benzophenone:
Step 1: Nucleophilic addition - The nucleophile, phenylmagnesium bromide, attacks the electrophilic carbonyl carbon of benzophenone, forming an alkoxide intermediate.
Step 2: Protonation - The alkoxide intermediate is protonated with an acid (such as water or dilute acid), forming triphenylmethanol.
2) Reaction of ethyl benzoate with phenylmagnesium bromide:
Step 1: Nucleophilic substitution - The nucleophile, phenylmagnesium bromide, attacks the electrophilic carbonyl carbon of ethyl benzoate, breaking the carbon-oxygen bond and releasing the ethoxide ion as a leaving group.
Step 2: Protonation - The alkoxide intermediate is protonated with an acid (such as water or dilute acid), forming triphenylmethanol.
The difference in reactivity between these two reactions stems from the nature of the electrophilic species.
In the first reaction, benzophenone is a ketone, and the electrophilic carbonyl carbon is more susceptible to nucleophilic addition.
In the second reaction, ethyl benzoate is an ester, and the electrophilic carbonyl carbon is more susceptible to nucleophilic substitution due to the presence of a good leaving group (ethoxide ion).
Learn more about nucleophilic substitution reaction : https://brainly.com/question/29382322
#SPJ11
Which of the following indicates the least pressure?A) 1 atmB) 777 torrC) 5.5 mmHgD) 100 kPaE) 12 psi
The following that indicates the least pressure is C) 5.5 mmHg.
To compare these pressure values, let's first convert them all to a common unit, such as Pascal (Pa).
A) 1 atm = 101,325 Pa
B) 777 torr = 101,325 * (777/760) = 103,373.6 Pa (approx.)
C) 5.5 mmHg = 101,325 * (5.5/760) = 749.6 Pa (approx.)
D) 100 kPa = 100,000 Pa
E) 12 psi = 12 * 6,894.76 = 82,737.12 Pa (approx.)
Now, we can compare these values to find the least pressure:
A) 101,325 Pa
B) 103,373.6 Pa
C) 749.6 Pa
D) 100,000 Pa
E) 82,737.12 Pa
So, the least pressure is indicated by option C) 5.5 mmHg, which is approximately 749.6 Pa.
To know more about the least pressure refer here :
https://brainly.com/question/28450681#
#SPJ11
Can you guys help me with this
There would be few or no clouds near a high pressure system. Option C
What is the cloud cover?When a high pressure system is nearby, the weather is usually bright and dry, which might lead to a low cloud cover. In general, high pressure systems are related to falling air, which prevents clouds from forming and growing.
This is due to the fact that cooling and drying effects of descending air reduce relative humidity and constrict the quantity of moisture that can be used to build clouds.
Learn more about cloud cover:https://brainly.com/question/10050351
#SPJ1
PART OF WRITTEN EXAMINATION:
Code for Control of External Corrosion on Underground or Submerged Metallic Piping Systems
A) RP0285
B) SP0169
C) SP0176
D) SP0290
E) SP0388
The correct code for controlling external corrosion on underground or submerged metallic piping systems is RP0285. Corrosion is a natural process that occurs when metal is exposed to the environment.
It can weaken the structural integrity of metallic piping systems and lead to leaks and failures. Therefore, it is important to implement proper corrosion control measures to prevent or mitigate this issue. RP0285 provides guidelines for designing, installing, and maintaining corrosion control systems for metallic piping systems that are underground or submerged. This code covers a wide range of topics such as cathodic protection, coatings, and corrosion monitoring. By following RP0285, operators can ensure the safe and reliable operation of their metallic piping systems, reducing the risk of leaks and failures caused by corrosion.
learn more about corrosion Refer: https://brainly.com/question/28302789
#SPJ11
In an impressed current system,
A) the rectifier negative terminal is connected to the anodes
B) the rectifier positive terminal is connected to the anodes
C) the rectifier positive terminal is connected to the structure
D) conventional current in the soil goes from the structure to the anodes
In an impressed current system, the rectifier positive terminal is connected to the anodes. Therefore the correct option is option B.
A regulated electrical current is applied to a metallic structure as part of the impressed current cathodic protection (ICCP) technique to prevent corrosion.
The anodes in an ICCP system are often formed of a material that degrades over time, like graphite or titanium, and they are buried in the soil or electrolyte surrounding the building to provide protection.
The cathodic protection current travels to the structure after the anodes receive a direct electrical current from the rectifier and release their stored electrons into the soil or electrolyte.
The potential of the structure can be changed to a more negative value by managing the current flow, which lessens the likelihood of corrosion happening. Therefore the correct option is option B.
For such more question on anodes:
https://brainly.com/question/31520156
#SPJ11
Question An akene 't undergees ozonelysis and gives 'y' and 'y' of molecular formula ₂₂ 0.`'y' and y functional isomers of each other an write the two-steps Chemical equation for the conversion of '`t` into 'y' and 'z' b. Write the strucoral formula of Y'E=' Why are they called functional isomer? ( what happens when hydrogen gas in the presence of nicked catalyst - is passed over 'X' ? 4 d. How can you prove chemically. The compound 'x' is unsaturated.
Answer:
a. The given molecular formula of the akene is C22H40. When it undergoes ozonolysis, it gives two products with the same molecular formula C22H40, which are functional isomers of each other. These two isomers are 1-octene and 9-octene.
The two-step chemical equation for the conversion of the akene into 1-octene and 9-octene is as follows:
Step 1: Ozonolysis of the akene to form ozonides
C22H40 + 3O3 → C22H40O3 + 3O2
Step 2: Reduction of the ozonides to form 1-octene and 9-octene
C22H40O3 + 6H2O → 3C8H16 + 3C8H18O
b. The structural formula of the two isomers 1-octene and 9-octene are as follows:
1-octene: CH3(CH2)6CH=CH2
9-octene: CH3(CH2)4CH=CH(CH2)2CH3
They are called functional isomers because they have the same molecular formula but different functional groups. In this case, both isomers have an alkene functional group, but they differ in the position of the double bond.
c. When hydrogen gas in the presence of a nickel catalyst is passed over X, it undergoes hydrogenation to form a saturated compound Y. The chemical equation for the reaction is as follows:
X + H2 → Y
d. One way to prove that the compound X is unsaturated is by performing the bromine water test. Bromine water is a reddish-brown solution of bromine in water. When added to an unsaturated compound, it undergoes decolorization due to the addition of bromine across the double bond. If X is unsaturated, then it will decolorize bromine water, indicating the presence of a double bond.
(look at picture ) thanks :) ✨✨
The graph of the function y = 2x + 3 is attached. See below for the characteristics of the Linear function.
What are the qualities of the above function?The function provided exhibits qualities of a linear function, having a domain and range that encompass all real numbers.
Its slope or rate of change has a value of 2, while the intercepts are 3 for the y-axis and (-1.5,0) for the x-axis.
The absence of an axis of symmetry or vertex is indicative that this is not a quadratic function. Projectile motion is a practical example of a quadratic function.
Exponential functions, on the other hand, exhibit growth at a certain rate and are defined for all real numbers, with their range being positive real numbers. By studying exponential functions, one may observe exponential decay or growth as portrayed in the table.
Compound interest is an excellent real-world application of this kind of function.
Linear functions help model relations between two variables, quadratic functions can map parabolic forms, while exponential functions account for various growth/decay patterns.
Learn more about Functions:
https://brainly.com/question/12431044
#SPJ1
for an equilibrium involving gaseus substances what effect in general terms is realized when the volume of the system is decreased
When the volume of a system involving gaseous substances is decreased, the pressure within the system increases.
This is due to the fact that the molecules of the gas are being forced into a smaller space, causing them to collide more frequently with each other and the walls of the container. As a result, the concentration of the reactants in the system increases, leading to a shift in the equilibrium position.
According to Le Chatelier's Principle, when a system at equilibrium is subjected to a stress (such as a change in pressure, temperature, or concentration), it will respond by shifting in a direction that counteracts the stress. In the case of a decrease in volume, the system will respond by shifting in the direction that produces fewer moles of gas.
For example, consider the equilibrium reaction between nitrogen dioxide and dinitrogen tetroxide:
2NO₂(g) ⇌ N₂O₄(g)
If the volume of the system is decreased by compressing the container, the pressure within the container will increase, causing the equilibrium to shift to the right in order to reduce the number of gas molecules. This will result in an increase in the concentration of N₂O₄ and a decrease in the concentration of NO₂.
Overall, the effect of decreasing the volume of a system involving gaseous substances is to increase the pressure within the system and shift the equilibrium position in a direction that produces fewer moles of gas.
To know more about gaseous system, refer to the link below:
https://brainly.com/question/13149775#
#SPJ11
A voltaic cell consists of an Mn/Mn2+ half-cell and a Cd/Cd2+ half-cell. Calculate Ecell when [Cd2+] = 0. 00423 M and [Mn2+] = 0. 28 M.
You should use the reduction potentials for Mn2+ is -1. 18V and for Cd2+ is -0. 40 V
The cell potential of the voltaic cell is 0.8129 V.
The cell potential of a voltaic cell can be calculated using the Nernst equation:
Ecell = E°cell - (RT/nF) ln(Q)
where E°cell is the standard cell potential, R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin, n is the number of electrons transferred in the cell reaction, F is the Faraday constant (96485 C/mol), and Q is the reaction quotient.
The balanced cell reaction for the[tex]$\mathrm{Mn/Mn^{2+}}$[/tex] [tex]$\mathrm{Cd^{2+}}$[/tex] half-cells can be written as follows:
[tex]\mathrm{Mn^{2+}}$.[/tex]+ + 2e- → Mn (E° = -1.18 V)
[tex]$\mathrm{Cd^{2+}}$[/tex]+ + 2e- → Cd (E° = -0.40 V)
To calculate E°cell, we need to subtract the reduction potential of the anode from the reduction potential of the cathode:
E°cell = E°cathode - E°anode
E°cell = E°Cd - E°Mn
E°cell = (-0.40 V) - (-1.18 V)
E°cell = 0.78 V
Next, we need to calculate the reaction quotient, Q, using the concentrations of the reactants and products:
Q = [[tex]$\mathrm{Cd^{2+}}$[/tex]]/[[tex]$\mathrm{Mn^{2+}}$.[/tex]]
Q = 0.00423 M / 0.28 M
Q = 0.0151
Finally, we can plug in the values into the Nernst equation to calculate the cell potential:
Ecell = E°cell - (RT/nF) ln(Q)
Ecell = 0.78 V - (8.314 J/mol K)(298 K)/(2 mol e-)(96485 C/mol) ln(0.0151)
Ecell = 0.78 V - (-0.0329 V)
Ecell = 0.8129 V
Therefore, the cell potential of the voltaic cell is 0.8129 V.
Learn more about voltaic cell
https://brainly.com/question/1370699
#SPJ4