Molecules such as HCl, and NO are polar in nature but molecules such as [tex]N_2[/tex] and [tex]I_2[/tex] are non-polar.
Polarity refers to the uneven charge distribution in a molecule due to differences in electronegativity in an ion. The more electronegative in develops a partial negative charge and the other one a partial positive charge.
Molecules with polarity are known as polar molecules. In the case of HCl, Cl being more electronegative develops a negative charge over it. So is the case in NO.
Non-polar molecules are molecules with no charge developed as they have no polarity. This is because the charges revolve symmetrically in such molecules such as [tex]N_2[/tex] and [tex]I_2[/tex]
Thus, the molecules [tex]N_2[/tex] and [tex]I_2[/tex] are non-polar and HCl, and NO are polar molecules
Learn more about Polarity:
https://brainly.com/question/17118815
#SPJ4
In a many-electron atom, only the electrons at the ______ level will participate in covalent bonding.
In a many-electron atom, only the electrons at the outermost energy level will participate in covalent bonding.
The valence shell is the outermost energy level of an atom. It contains the electrons that are most likely to be involved in chemical interactions, such as covalent bonding. Covalent bonding occurs when two atoms share one or more electrons in order to achieve a more stable electron configuration. The electrons in the valence shell of each atom are the ones that are shared in this process. Therefore, only the electrons in the valence shell of a many-electron atom will participate in covalent bonding.
To learn more about covalent bonding click here https://brainly.com/question/14509196
#SPJ11
State which of the following species are amphiprotic and write chemical equations illustrating the amphiprotic character of these species. (Omit states-of-matter from your answer. Use the lowest possible whole number coefficients. Enter NONE for both chemical equations if a species is not amphiprotic.) (a) H20 amphiprotic not amphiprotic Acting as an acid chemPad Help Greek Acting as a base chemPad Help Greek (b) S2- amphiprotic Acting as an acid in water chemPad Help Greek Acting as a base in water chemPad Help Greek (c) HCGH5072 6 507 amphiprotic not amphiprotic Acting as an acid in water chemPad Help Greek Acting as a base in water chemPad Help Greek▼ (d) HSO4 amphiprotic not amphiprotic Acting as an acid in water chemPad Help Greek Acting as a base in water chemPad Help Greek▼ (e) co,2- amphiprotic not amphiprotic Acting as an acid in water chemPad Help Greek▼ Acting as a base in water chemPad Help Greek
Amphiprotic species are those that can act as both an acid and a base in a chemical reaction. So, among the given options
(a) H₂O - amphiprotic
(b) S₂⁻ - amphiprotic
(d) HSO₄⁻ - amphiprotic
(e) CO₃²⁻ - amphiprotic
(a) H₂O can act as an acid by donating a proton (H⁺) and as a base by accepting a proton. For example, in the reaction with HCl, water acts as a base and accepts a proton to form H₃O⁺ and Cl⁻. The chemical equation for the amphiprotic character of water can be written as:
H₂O + HCl -> H₃O⁺ + Cl⁻
(b) S₂⁻ can also act as an acid and donate a proton, or as a base and accept a proton. For example, in the reaction with HCl, sulfide ion acts as a base and accepts a proton to form HS⁻ and Cl⁻. The chemical equation for the amphiprotic character of S₂⁻ can be written as:
S₂⁻ + HCl -> HS⁻ + Cl⁻
(d) HSO₄⁻ and CO₃²⁻ are also amphiprotic species. HSO₄⁻ can act as an acid and donate a proton or as a base and accept a proton. For example, in the reaction with NH₃, HSO₄⁻ acts as an acid and donates a proton to form NH₄⁺ and SO₄²⁻. The chemical equation for the amphiprotic character of HSO₄⁻ can be written as:
HSO₄⁻ + NH₃ -> NH₄⁺ + SO₄²⁻
(e) CO₃²⁻ can act as an acid and donate two protons or as a base and accept two protons. For example, in the reaction with HCl, CO₃²⁻ acts as a base and accepts two protons to form H₂CO₃ and Cl⁻. The chemical equation for the amphiprotic character of CO32- can be written as:
CO₃²⁻ + 2HCl -> H₂CO₃ + 2Cl⁻
Therefore, only H₂O, S₂⁻, HSO₄⁻, and CO₃²⁻ are amphiprotic species. a, b, d and e are the correct options.
To know more about amphiprotic, refer to the link below:
https://brainly.com/question/28298774#
#SPJ11
The diagram below shows the structure of an animal cell.
The image of an animal cell is shown with some organelles labeled numerically from 1 to 6. The outer double layer boundary of the cell is labeled 1. A stacked disc like structure is labeled 2. A broad rod shaped structure with an irregular shape inside it is labeled 3. The entire plain section that forms the background of the cell and is within the outer boundary is labeled 4. A small circular shape within the large circular shape is labeled 5. The large central circular shape is labeled 6.
Which number label represents the mitochondria?
1
2
3
6
Mitochondria is a double membrane bound organelle which is found in most eukaryotic organisms. They are found inside the cytoplasm and essentially function as the cells digestive system. Here number 3 represents the mitochondria. The correct option is C.
Mitochondria popularly known as the power house of the cell play an important role in breaking down the nutrients and produce energy rich molecules for the cell. Its size ranges from 0.5 to 1.0 micrometer in diameter.
The mitochondria is a double membraned rod shaped structure which is found both in plants and animals. It comprises of an outer membrane, inner membrane and a gel material called matrix.
Thus the correct option is C.
To know more about mitochondria, visit;
https://brainly.com/question/29763308
#SPJ1
4. Which type of nuclear reaction has the reactants with a greater mass than the products?
Fusion
Fission
Answer:
NUCLEAR FISSION
Explanation:
According to Einstein's equation, E = mc2, where
m
is the mass and
c
is the speed of light states that mass can be converted to energy and vice-versa. In nuclear fission, the mass of reactants is more than mass of the products. The difference in mass is called the mass defect. This mass is converted into energy
Which pair of properties describes the elements in Group 18?
F. They are chemically stable and liquid at room temperature.
G. They have eight valence electrons and are flammable.
H. They are magnetic and boil at low temperatures.
J. They are gaseous at room temperature and chemically stable
The correct option is J, They are gaseous at room temperature and chemically stable" which correctly describes the properties of the elements in Group 18.
Room temperature is typically defined as the temperature range at which a substance or reaction is carried out under normal laboratory conditions, without the need for specialized equipment or procedures to control the temperature. Room temperature is usually considered to be around 20-25 degrees Celsius (68-77 degrees Fahrenheit), although this can vary slightly depending on the specific laboratory or experiment.
At room temperature, most common substances are in a stable, solid or liquid state, and many chemical reactions can take place at a reasonable rate without the need for additional heating or cooling. However, it is important to note that certain reactions or materials may require more precise temperature control in order to ensure accurate results or prevent safety hazards.
To learn more about Room temperature visit here:
brainly.com/question/8739174
#SPJ4
What is an effective safety measure when running a new reaction?
Keep the temperature low.
Run the reaction on a small scale.
Run the reaction for just a short time.
Avoid using any catalysts.
An effective safety measure when running a new reaction is to start by b. Run the reaction on a small scale.
By conducting the experiment with smaller quantities of reactants, you can minimize potential hazards and more easily monitor the reaction. This allows you to observe any unexpected outcomes or side reactions that may occur.
Keeping the temperature low is another important safety measure. High temperatures can lead to increased reaction rates and the formation of more side products, making the reaction difficult to control. By maintaining a lower temperature, you can better manage the reaction and ensure a safer process.
Running the reaction for a short time is also a useful strategy. By limiting the reaction time, you can quickly identify any issues that may arise, such as excessive heat generation or unexpected byproducts. This enables you to address these issues promptly before they escalate.
While avoiding catalysts may seem like a safe choice, it is essential to understand that catalysts can improve the reaction's efficiency and selectivity. When used correctly, catalysts can make a reaction safer and more controlled. It is crucial to choose an appropriate catalyst and use it in the correct proportions to ensure a safe reaction.
In summary, when running a new reaction, it is essential to implement safety measures such as running the reaction on a small scale, maintaining a low temperature, and limiting the reaction time. Additionally, the proper use of catalysts can enhance reaction safety and control.
To learn more about new reaction, refer:-
https://brainly.com/question/19072147
#SPJ11
Molecules are ________.
A) two or more atoms held together by chemical bonds
B) a chemical that cannot be broken or separated
C) basic subunits of elements
D) atoms of an element
E) positively charged particles
Molecules are two or more atoms held together by chemical bonds. Therefore the correct option is option A.
A molecule is created when two or more atoms bind to one another. It doesn't matter whether the atoms are from the same element (like O2) or from different elements (like H2O, which has two hydrogen atoms and one oxygen atom). Covalent, ionic, or metallic chemical bonds can hold the atoms of a molecule together.
The smallest units of a compound that still have their chemical properties are called molecules. Chemical processes can separate them into individual atoms, but physical processes like heating or freezing cannot. Therefore the correct option is option A.
For such more question on Molecules:
https://brainly.com/question/475709
#SPJ11
Gold has a specific heat of 0.129 J/(g x °C). How many joules of heat energy are required to raise the temperature of 15 grams of gold from 22°C to 85°C?
A. 121 J
B. 1.2 x 102 J
C. 43 J
D. 164 J
To calculate the joules of heat energy required to raise the temperature of 15 grams of gold from 22°C to 85°C, you can use the formula: Q = mcΔT where Q is the heat energy in joules, m is the mass in grams, c is the specific heat, and ΔT is the change in temperature.
Given: m = 15 grams c = 0.129 J/(g x °C) Initial temperature = 22°C Final temperature = 85°C First, find the change in temperature (ΔT): ΔT = Final temperature - Initial temperature ΔT = 85°C - 22°C ΔT = 63°C Now, plug the values into the formula: Q = (15 g) x (0.129 J/(g x °C)) x (63°C) Q = 121.635 J Since the answer should be in whole joules, you can round it to the nearest whole number: Q ≈ 122 J None of the given options match the calculated answer. However, option A (121 J) is closest to the calculated value of 122 J, so it can be considered as the best available answer among the provided options.
Learn more about temperature here-
https://brainly.com/question/11640665
#SPJ11
Give the common name for each of the following molecular compounds.
NH3 is ___ and H2O is ___ .
NH3 is commonly known as ammonia and H2O is commonly known as water. Molecular compounds are formed by the combination of two or more non-metal elements.
These compounds are also known as covalent compounds as they are held together by covalent bonds. Covalent bonds are formed by the sharing of electrons between two atoms. Molecular compounds are characterized by their low melting and boiling points and are generally poor conductors of electricity.
NH3, which is ammonia, is a colourless gas with a pungent odour. It is used in the production of fertilizers, cleaning agents, and as a refrigerant. NH3 is composed of one nitrogen atom and three hydrogen atoms. It is a basic compound and reacts with acids to form ammonium salts.
H2O, which is water, is a colourless, odourless, and tasteless liquid. It is essential for all forms of life on Earth and is the most common substance on Earth's surface. Water is composed of two hydrogen atoms and one oxygen atom. It is a polar compound, which means it has a positive and negative end. Water is a versatile solvent and is capable of dissolving many substances.
In conclusion, NH3 is commonly known as ammonia and H2O is commonly known as water. These molecular compounds have unique properties and are essential to life on Earth.
To learn more about molecular compounds, refer:-
https://brainly.com/question/30328923
#SPJ11
Ionic bonds lead to the formation of _____________ , Incorrect Unavailable rather than separate, discrete molecules.
Ionic bonds lead to the formation of crystal lattices, rather than separate, discrete molecules.
Positively charged cations and negatively charged anions are produced when electrons are transported from one atom to another in an ionic bond.
Then, these ions arrange themselves into a three-dimensional array to reduce the system's potential energy. A repeating unit cell can serve as a representation of the final structure, a crystal lattice.
Instead of distinct, discrete molecules, crystal lattices are formed as a result of ionic bonding.
Strong electrostatic interactions between the ions with opposing charges hold the lattice together. Ionic chemicals do not exist as isolated molecules since the lattice permeates the entire crystal.
For such more question on molecules:
https://brainly.com/question/475709
#SPJ11
When is exactly neutralized by , the hydrogen ion concentration in the resulting solution is:
A
always less than the concentration of hydroxide ions
B
always greater than the concentration of hydroxide ions
C
always equal to the concentration of hydroxide ions
D
sometimes greater and sometimes less than the concentration of hydroxide ions.
The hydrogen ions from the acid react with the hydroxide ions from the base to form water. This reaction is also known as an acid-base neutralization reaction. The resulting solution is neutral, meaning that it has a pH of 7. The correct option is C.
When an acid is neutralized by a base, the resulting solution contains water and a salt.
In a neutral solution, the concentration of hydrogen ions (H⁺) is equal to the concentration of hydroxide ions (OH⁻). This means that the answer is C - always equal to the concentration of hydroxide ions. The equation for this reaction is:
HA + BOH → H₂O + BA
In this equation, HA represents an acid, BOH represents a base, H₂O represents water, and BA represents a salt.
The pH of a solution can be determined by calculating the concentration of hydrogen ions. If the concentration of hydrogen ions is greater than the concentration of hydroxide ions, the solution is acidic and has a pH less than 7. If the concentration of hydroxide ions is greater than the concentration of hydrogen ions, the solution is basic and has a pH greater than 7. In a neutral solution, the concentration of hydrogen ions is equal to the concentration of hydroxide ions, resulting in a pH of 7.
To know more about neutralization reaction, refer to the link below:
https://brainly.com/question/28970253#
#SPJ11
using crystal field theory, determine the number of unpaired electrons in [mn(nh3)6]2 . view available hint(s)for part a using crystal field theory, determine the number of unpaired electrons in [mn(nh3)6]2 . three unpaired electrons two unpaired electrons one unpaired electron five unpaired electrons
Using crystal field theory, the number of unpaired electrons in [Mn(NH₃)₆]²⁺ is three.
Using crystal field theory, we can determine the number of unpaired electrons in the complex ion [Mn(NH₃)₆]²⁺+ as follows:
The complex ion consists of a central Mn²⁺ ion, which is surrounded by six NH₃ ligands. Mn²⁺ has an electron configuration of [Ar] 3d⁵, meaning it has five electrons in its d orbitals. The NH₃ ligands are considered weak field ligands, meaning they cause a small energy difference between the d orbitals.
In weak field complexes, the electrons preferentially occupy the lower energy orbitals in a way that maximizes the number of unpaired electrons (Hund's rule). In an octahedral complex, such as [Mn(NH₃)₆]²⁺, the d orbitals are split into two groups: the t²g orbitals (dxy, dxz, dyz) and the eg orbitals (dz², dx²-y²). The t²g orbitals are lower in energy than the eg orbitals.
As there are five d electrons in Mn²⁺, they will first fill the t²g orbitals, with one electron each (following Hund's rule). This results in three unpaired electrons in the [Mn(NH₃)₆]²⁺ complex ion.
To know more about crystal field theory, refer to the link below:
https://brainly.com/question/29389010#
#SPJ11
How many electron pairs are shared (i.e., how many bonds are present) in each of the following molecules and ions?
1. CO
2. O2
3. ClO
4. CN
1. CO: 3 electron pairs are shared.
2. O₂: Two electron pairs are shared.
3. ClO: 1 electron pair is shared.
4. CN: Three electron pairs are shared.
Here's the information about the shared electron pairs (bonds) in each of the molecules and ions:
1. CO - Carbon Monoxide has a triple bond between C and O, which means 3 electron pairs are shared.
2. O₂ - Oxygen molecule has a double bond between the two O atoms, which means 2 electron pairs are shared.
3. ClO - Chlorine Monoxide has a single bond between Cl and O, which means 1 electron pair is shared.
4. CN - Cyanide ion has a triple bond between C and N, which means 3 electron pairs are shared.
For more such questions on Electron pairs.
https://brainly.com/question/18651326#
#SPJ11
which statement concerning galvanic (voltaic) cells and/or electrolytic cells is correct? electrolytic cells can serve as a source of electrical energy external electric energy must be supplied to a galvanic (voltaic) cell. the cathode is the site of reduction in a galvanic (voltaic) cell but the cathode is the site of oxidation in an electrolytic cell. in a galvanic (voltaic) cell the redox reaction is always spontaneous.
The correct statement concerning galvanic (voltaic) cells and electrolytic cells is that external electric energy must be supplied to an electrolytic cell, while in a galvanic (voltaic) cell, the redox reaction is always spontaneous.
Galvanic cells produce electrical energy from a spontaneous redox reaction, where the anode undergoes oxidation and the cathode undergoes reduction. This flow of electrons generates an electrical current that can be used to power electronic devices. In contrast, electrolytic cells require an external source of electrical energy to drive a non-spontaneous redox reaction. The anode serves as the site of oxidation, and the cathode serves as the site of reduction. By supplying electrical energy, the reaction can proceed in the desired direction, producing a product that would not form spontaneously.
In summary, galvanic cells can serve as a source of electrical energy, while electrolytic cells require external electric energy to drive a non-spontaneous reaction. The cathode is the site of reduction in a galvanic (voltaic) cell, but the cathode is the site of oxidation in an electrolytic cell. Finally, in a galvanic (voltaic) cell, the redox reaction is always spontaneous, while in an electrolytic cell, an external energy source is required to drive the non-spontaneous reaction.
for more such questions on spontaneous.
https://brainly.com/question/29315358
#SPJ11
Consider the titration of 50. 0 ml of 0. 318 m weak base b (kb = 7. 5 x 10⁻⁶) with 0. 340 m hno₃. What is the ph of the solution before any strong acid has been added? b After 30. 0 mL of HNO: have been added, identify the primary species left in the solution
The pH of the solution before the addition of any strong acid is 12 and the primary species left in the solution are mixture of the weak base and conjugate acid.
a) Before any strong acid has been added, the solution contains only the weak base B. To find the pH of the solution, we can use the expression for the base dissociation constant:
Kb = [BH⁺][OH⁻]/[B]
At equilibrium, we can assume that [OH⁻] ≈ [BH⁺], since the base is weak and only partially dissociates. Therefore:
Kb = [OH⁻]²/[B]
[OH⁻]² = Kb[B]
[OH⁻] = √(Kb[B]) = √(7.5×10⁻⁶ mol/L × 0.318 L) ≈ 5.4×10⁻³ mol/L
Since Kw = [H⁺][OH⁻], we can find the [H⁺] concentration:
Kw = [H⁺][OH⁻]
[H⁺] = Kw/[OH⁻]
= 1.0×10⁻¹⁴ mol²/L² ÷ 5.4×10⁻³ mol/L
≈ 1.9×10⁻¹² mol/L
The pH of the solution is then:
pH = -log[H⁺] ≈ 12
The pH of the solution is therefore roughly 12 prior to the addition of any strong acids.
b) After adding 30.0 mL of HNO₃, we have added:
n(HNO₃) = C(V) = 0.340 mol/L × 0.0300 L = 0.0102 mol
Since the base is weak, we can assume that all of the added HNO₃ reacts with the base, and that the solution is still basic. The base will be partially neutralized to form the conjugate acid BH⁺, which is also weak. The primary species left in the solution will be a mixture of the weak base B, its conjugate acid BH⁺, and any excess HNO₃ that has not reacted with the base.
To know more about pH value, visit,
https://brainly.com/question/26424076
#SPJ4
A chemical equation is balanced whenA. the total number of molecules is the same in reactants.B. The charge on each atom is the same in reactants and products.C. the total number of ions is the same in reactants and products.D. the sum of the coefficients of the reactants is equal to the sum of the coefficients of the products.E. the number of atoms of each element is the same in reactants and products.
A chemical equation is balanced when E. the number of atoms of each element is the same in reactants and products because in a balanced chemical reaction the amount of reactants is equal to the amount of products.
A balanced chemical equation represents a chemical reaction with the same number of atoms of each element on both sides of the equation. In other words, the total mass and the number of atoms in the reactants are equal to those in the products.
The balance of the equation is achieved by adjusting the coefficients in front of the chemical formulas of the reactants and products to ensure that the same number of atoms of each element is present on both sides of the equation. Hence, option E is correct.
Balancing the chemical equation is important as it helps to predict the amount of reactants and products that will be used and formed, respectively, and it also ensures that the reaction follows the law of conservation of mass.
To learn more about chemical equation, click here:
https://brainly.com/question/30087623
#SPJ11
Which of the following is not believed to have been a component of the early Earth's atmosphere?
a. N2 (nitrogen gas)
b. H2 (hydrogen gas)
c. CO2 (carbon dioxide)
d. O2 (oxygen gas)
Answer:
D) Oxygen Gas
Explanation:
Early Earth's atmosphere lacked oxygen gas due to the lack of general vegetation on Earth (plants produce O2 gas as a byproduct of photosynthesis) and the large presence of volcanic gases, which are mostly made up of CO2.
3. Which reaction is only experimental?
Fission
Fusion
Both
Nuclear fission is only experimental however, nuclear fusion is not experimental.
What are Nuclear fission and Fusion?Fission generates energy by breaking heavier atoms, such as uranium, into smaller atoms like iodine, cesium, strontium, xenon, and barium, to mention a few.
Fusion, on the other hand, is the joining of light atoms, such as two hydrogen isotopes.
Both are nuclear reactions that generate energy, but they are not the same. Fusion is the joining of two light nuclei to create a larger nucleus, whereas fission is the breaking of a heavy nucleus into two lighter ones.
Learn more about Nuclear fission and Fusion here:
https://brainly.com/question/3992688
#SPJ1
What is the written formula for Manganese (IV) nitrate?
The written formula for Manganese (IV) nitrate is Mn(NO₃)₄.
In this formula, Manganese (Mn) has a +4 charge (indicated by the Roman numeral IV) and Nitrate (NO₃) has a -1 charge.
To create a neutral compound, we need four nitrate ions to balance the +4 charge of Manganese.
Therefore, we write the formula as Mn(NO₃)₄.
Hence, The written formula for Manganese (IV) nitrate is Mn(NO₃)₄, which consists of one Manganese ion with a +4 charge and four nitrate ions, each with a -1 charge, to form a neutral compound.
learn more about Manganese click here:
https://brainly.com/question/28533522
#SPJ11
A photon of ultraviolet light has 5.6610-
18 J of energy. (a) What is the frequency of
the ultraviolet light? (b) What is the
wavelength?
a) The frequency of ultraviolet light is 8.54 * 10^{15} Hz
b) The wavelength of ultraviolet light is 35 nm
To solve for the frequency of ultraviolet light, we can use the equation E = hf, where E is the energy of the photon, h is Planck's constant, and f is the frequency of the photon. Rearranging the equation, we get f = E/h. Plugging in the given values, we get
f = \frac{(5.6610-18 J)}{(6.62607015 * 10^{-34} J s)
f = 8.54 * 10^{15} Hz.
To solve for the wavelength of ultraviolet light, we can use the equation c = λf, where c is the speed of light, λ is the wavelength, and f is the frequency. Rearranging the equation, we get λ = \frac{c}{f}. Plugging in the given values and the speed of light (299,792,458 m/s), we get
λ = \frac{(299,792,458 m/s)}{(8.54 * 10^{15} Hz)
λ= 35 nm (nanometers).
In summary, the frequency of ultraviolet light with a photon energy of 5.6610-18 J is 8.54 * 1015 Hz, and the corresponding wavelength is 35 nm. Ultraviolet light has a shorter wavelength and higher frequency than visible light, making it more energetic and potentially harmful to living organisms.
learn more about Ultraviolet light refer: https://brainly.com/question/28883964
#SPJ11
calculate the mass, in grams, of each of the following. 3.15 mol agno3 0.0901 mol cacl2 11.86 mol h2s g
The mass of 3.15 mol of AgNO₃ is 533.6 grams, the mass of 0.0901 mol of CaCl₂ is 10.02 grams, and the mass of 11.86 mol of H₂S is 404.5 grams.
To calculate the mass in grams of each of the given substances, we need to use the molar mass of each compound. The molar mass of AgNO₃ (silver nitrate) is 169.87 g/mol, the molar mass of CaCl₂ (calcium chloride) is 110.98 g/mol, and the molar mass of H₂S (hydrogen sulfide) is 34.08 g/mol.
To calculate the mass of 3.15 mol of AgNO₃, we can use the following formula:
mass = moles x molar mass
mass = 3.15 mol x 169.87 g/mol
mass = 533.6 g
Therefore, the mass of 3.15 mol of AgNO₃ is 533.6 grams.
Similarly, to calculate the mass of 0.0901 mol of CaCl₂, we can use the formula:
mass = moles x molar mass
mass = 0.0901 mol x 110.98 g/mol
mass = 10.02 g
Therefore, the mass of 0.0901 mol of CaCl₂ is 10.02 grams.
Finally, to calculate the mass of 11.86 mol of H₂S, we can use the formula:
mass = moles x molar mass
mass = 11.86 mol x 34.08 g/mol
mass = 404.5 g
Therefore, the mass of 11.86 mol of H₂S is 404.5 grams.
To know more about mass, refer to the link below:
https://brainly.com/question/14200145#
#SPJ11
Can you think of ways in which your life might be different if you lived according to a lunar calendar?
(this is for science)
The specifics of when a month starts differ from calendar to calendar; some rely on new, entirety, or crescent moons, while others do complex computations.
In contrast with solar calendars, which annual cycles are only based on the solar year, a lunar calendar includes a calendar built on the monthly phases of the Moon's aspects (synodic months, lunations). The Islamic calendar is the most extensively used lunar calendar.
A lunisolar calendar, in which the lunar months come into alignment to the solar year by some process of intercalation, such as by inserting a leap month, is distinguished from a strictly lunar calendar. The specifics of when a month starts differ from calendar to calendar; some rely on new, entirety, or crescent moons, while others do complex computations.
To know more about lunar calendar, here:
https://brainly.com/question/30488813
#SPJ1
Calculate the [h ] for a 0. 0473 m solution of barium hydroxide, ba(oh)2 assuming complete dissociation of the compound
The hydrogen ion concentration ([h]) for a 0.0473 m solution of Barium hydroxide, [tex]Ba(OH)2[/tex] assuming complete dissociation of the compound is 0.0946 mol/L.
The symbol [h] typically refers to the hydrogen ion concentration in a solution.
The balanced equation for the solution of barium hydroxide is
[tex]Ba(OH)_{2} (s)[/tex] → [tex]Ba_{2}[/tex](aq) + 2OH-(aq)
Here [tex]Ba(OH)_{2}[/tex] dissolves completely. The concentration of barium hydroxide and OH- will be equal to the concentration [tex]Ba(OH)2[/tex] originally added to the solution
The OH- concentration will be calculated as:
[OH-] = 2 × 0.0473 mol/L
[OH-]= 0.0946 mol/L
[h] = [H+] = [OH-] = 0.0946 mol/L
Therefore, we can conclude that the hydrogen ion concentration ([h]) is 0.0946 mol/L.
To learn more about Barium hydroxide
https://brainly.com/question/31327057
#SPJ4
Which electron dot diagram shows how hydrogen and oxygen are bonded together in the compound H2O?
The correct electron dot structure of water is shown by option B
What is electron dot structure?Each valence electron in the electron dot structure is represented by a dot that is positioned around the element's atomic symbol.
The Lewis dot structure, sometimes referred to as the electron dot structure, uses dots to represent the valence electrons of an atom.
Water contains two hydrogen and one oxygen atom with the oxygen atom having two lone pairs of electrons as shown above in the question.
Learn more about electron dot structure:https://brainly.com/question/9840379
#SPJ1
Which compound will experience the largest change in temperature during evaporation for 30 seconds at room temperature?
a CH3CH2CH3
b CH4
c CH3CH2CH2CH2CH3
Answer: CH4
Explanation: Methane
Chemistry help!!!! Answer all the blank please and thanks! (WIll give brainliest)
Boric acid is a monoprotic and Lewis acid. B(OH)[tex]_3[/tex] + H[tex]_2[/tex]O ⇌ [BO(OH)[tex]_2[/tex]]− + H[tex]_3[/tex]O+ and HBO[tex]_2[/tex] + H[tex]_2[/tex]O ⇌ [BO[tex]_2[/tex]]− + H[tex]_3[/tex]O+ are the reactions for ionisation of boric acid.
In particular, orthoboric acid is a boron, oxygen, plus hydrogen chemical having the formula B(OH)3. Trihydroxidoboron, hydrogen orthoborate, and boracic acid are other names for it. It occurs naturally as the substance known as sassolite and is typically found as colourless crystals.
A white powder that dissolves in water. It is a weak acid that can react using alcohols to produce borate esters as well as a variety of borate anions and salts. Boric acid is a monoprotic and Lewis acid. B(OH)[tex]_3[/tex] + H[tex]_2[/tex]O ⇌ [BO(OH)[tex]_2[/tex]]− + H[tex]_3[/tex]O+ and HBO[tex]_2[/tex] + H[tex]_2[/tex]O ⇌ [BO[tex]_2[/tex]]− + H[tex]_3[/tex]O+ are the reactions for ionisation of boric acid.
To know more about Boric acid, here:
https://brainly.com/question/14879930
#SPJ1
The following items are required to create a concise informative plot for each of the terms listed. (Some terms are used more than once.)
The choices are (reaction, chemicals or system being investigated / special conditions of the experiment / best fit line or curve with an equation / units (if any) / table with headers containing units / name or symbol of the variable)
Title [ Choose ] Axes [Choose ] Akes [ Choose] Data [Choose] Data [ Choose ] reaction, chemicals or system being investigated special conditions of the experiment best fit line or curve with an equation units (if any) table with headers containing units name or symbol of the variable
To create a concise informative plot for each of the terms listed, the following items are required: 1. Reaction, Chemicals or System Being Investigated:
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Data: Plot the data points on the graph.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.
2. Special Conditions of the Experiment:
Title: Include the special conditions being tested in the title.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Data: Plot the data points on the graph.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.
3. Best Fit Line or Curve with an Equation:
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Data: Plot the data points on the graph.
Best Fit Line or Curve with an Equation: Draw the best fit line or curve through the data points and display the equation on the graph.
Units (if any): Include units on the axes and in the equation.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.
4. Units (if any):
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured, including their units.
Data: Plot the data points on the graph.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.
5. Table with Headers Containing Units:
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.
To know more about chemical reaction, refer
https://brainly.com/question/25769000
#SPJ11
PLEASE ANSWER!!! QUICK
2HCI + CaCO3 --> CO2 + H2O + CaCL2
What is the ratio of hydrochloric acid to calcium carbonate in the reaction?
A. 1 HCI: 2CaCO3
B. 2 HCI: 1CaCO3
C. 1 HCI: 1CaCO3
D. 2 HCI: 0.5CaCO3
Answer:
Explanation:
it's B. 2 HCI: 1 CaCO3 :)
Methane (CH4) is used in laboratory burner. When 1 mole of methane burns at constant pressure, it produces 804 kJ of heat and does 3 kJ of work.1. What is the value of ÎHÂ for the combustion of one mole of methane?2. What is the value of ÎEÂ for the combustion of one mole of methane?
The answers are 1. the value of ΔH° for the combustion of one mole of methane is -801 kJ/mol and 2. the value of ΔE° for the combustion of one mole of methane is also -801 kJ/mol.
1. The value of ΔH° for the combustion of one mole of methane can be calculated using the first law of thermodynamics:ΔH° = ΔE° + PΔVWhere ΔE° is the change in internal energy of the system, P is the pressure, and ΔV is the change in volume. Since the combustion is done at constant pressure, ΔV is equal to the volume of the gaseous products minus the volume of the gaseous reactants, which is negligible. Therefore, we can assume that ΔV is zero and simplify the equation to:ΔH° = ΔE° + PΔV = ΔE°Given that 1 mole of methane produces 804 kJ of heat and does 3 kJ of work, the change in internal energy can be calculated as:[tex]ΔE° = q + w = -804 kJ + 3 kJ = -801 kJ/mol[/tex]Therefore, the value of ΔH° for the combustion of one mole of methane is -801 kJ/mol.2. The value of ΔE° for the combustion of one mole of methane can be calculated using the same equation as above:[tex]ΔE° = q + w = -804 kJ + 3 kJ = -801 kJ/mol[/tex]Therefore, the value of ΔE° for the combustion of one mole of methane is also -801 kJ/mol.The difference between ΔH° and ΔE° is that ΔH° accounts for any work done by the system, while ΔE° only accounts for the change in internal energy of the system. In this case, since the work done is negligible compared to the heat produced, the values of ΔH° and ΔE° are almost identical.For more such question on combustion
https://brainly.com/question/24113573
#SPJ11
When a ketone and its enol are in equilibrium, under most conditions, the concentration of the enol is _________ the concentration of the ketone. A. Slightly higher than B. Equal to C. Much higher than D. Much lower than E. Exactly half of primary
When a ketone and its enol are in equilibrium, under most conditions, the concentration of the enol is slightly higher than the concentration of the ketone. Option A is Correct.
This is because the enol is the less stable tautomer and therefore the equilibrium lies slightly towards the enol form.
The keto-enol tautomerism is the name of this chemical equilibrium. The enol tautomer and keto would quickly reach equilibrium. Additionally, because the keto form is more stable in this equilibrium, it predominates in the combination. Therefore, the enol's concentration would be lower than the keto's.
Even though enol suggests the presence of a double bond and a hydroxyl group, they carry a carbonyl bond. The stabilising components of both the keto and enol tautomers are necessary for the equilibrium of keto-enol tautomerization.
The enol that might have produced 2-pentanone was pent-1-en-2-ol. Equilibrium is not a very good depiction because it substantially favours the ketone.
Little reaction might be seen if the ketone was treated with bromine because the enol level might be too low.
Learn more about keto-enol tautomerization here
https://brainly.com/question/27749729
#SPJ11