Answer:
Dust and smoke.
Explanation:
Dust and smoke are two different particles present in the air. Dust and smoke are different from one another due to their origin. Smoke formed from burning of materials while dust refers to the soil particles lifted by the wind due to their light weight. Dust and smoke are similar to each other due to their small in size, infinite number means uncountable and light weight.
Air is a mixture of gases and consists of dust particles and water vapor. It consists of small to very large size of particles. Some of them include dust pollen, soot, and liquid droplets.
Dust and soot particles of the air are different as the soot is a fine black particle of carbon and tar. It is made by the incomplete combustion of air. While dust is fine dry particles of matter.Hence they both differ.
Learn more about the two different particles found in the air.
brainly.in/question/35683807.
3. (10 Points) Write a double replacement reaction where one of the products is
copper (11) oxide. Include the states of matter for each of the reactants and
products.
Answer:
Up to now, we have presented chemical reactions as a topic, but we have not ... A single-replacement reaction is a chemical reaction in which one element is ... single-replacement reactions will occur between two given reactants. This is ... Use the activity series to predict the products, if any, of each equation.
Explanation:
* The cost of table salt and table sugar is Rs 15 per kg.
and Rs 69 per kg respectively calculate their cost per mole?
Cost per mole
Table salt : Rs 0.878
Table sugar : Rs 23.63
Further explanationGiven
Cost table salt (NaCl) = 15/kg
Cost table sugar(sucrose-C12H22O11) = 69/kg
Required
cost per mole
Solution
mol of 1 kg Table salt(NaCl ,MW= 58.5 g/mol) :
[tex]\tt mol=\dfrac{1000~g}{58.5}=17.09~mol=Rs~15\rightarrow 1~mol=Rs~0.878[/tex]
mol of 1 kg Table sugar(C12H22O11 ,MW= 342 g/mol) :
[tex]\tt mol=\dfrac{1000}{342}=2.92~mol=Rs~69\rightarrow 1~mol=Rs~23.63[/tex]
Calculate the number of protons and neutrons for ²⁴Mg and 88Sr.
Answer:
12 protons and 12 neutrons are present in Mg and
38 protons and 50 neutrons are present in Sr
Explanation:
Answer:
For ²⁴Mg
1. Proton number = 12
2. Neutron number = 12
For ⁸⁸Sr:
1. Proton number = 38
2. Neutron number = 50
Explanation:
For ²⁴Mg:
1. Determination of the number of proton.
The atomic number of an element is simply defined as the number protons in the atom of the element. The atomic number of ²⁴Mg is 12 since no two elements have the same atomic number.
Atomic number = 12
Proton number = Atomic number
Proton number = 12
2. Determination of the Neutron number.
Mass number = 24
Proton number = 12
Neutron number =?
Mass number = Proton + Neutron
24 = 12 + Neutron
Collect like terms
Neutron = 24 – 12
Neutron number = 12
For ⁸⁸Sr:
1. Determination of the number of proton.
The atomic number of ⁸⁸Sr is 38.
Atomic number = 38
Proton number = Atomic number
Proton number = 38
2. Determination of the Neutron number.
Mass number = 88
Proton number = 38
Neutron number =?
Mass number = Proton + Neutron
88 = 38 + Neutron
Collect like terms
Neutron = 88 – 38
Neutron number = 50
If a parent cell has 24 chromosomes , how many chromosomes will each daughter cell have? Then compare the chromosomes in the parent cell and the daughter cells.
Answer:
If a cell has 24 chromosomes before cell division then daughter cell resulting from mitotic division will have 24 chromosomes while daughter cell resulting from the meiotic division will contain 12 chromosomes each.
Explanation:
When using a light microscope, focus the specimen with the scanning objective
lens first.
Reasoning:
Answer:
The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.
What is it called when elements combine to form a chemical compound?
Explanation:
A compound is a unique substance that forms when two or more elements combine chemically.Compounds form as a result of chemical reactions. The elements in compounds are held together by chemical bonds. A chemical bond is a force of attraction between atoms or ions that share or transfer valence electrons.hope it helpful ✌️✌️
PLEASE HELP
Fossil fuels are burnt in power plants to produce electricity. Which one of the
following sequences show the correct order of energy transformation?
Answer:
a
Explanation:
Chemical then thermal because the carbon emissions produce heat
Then kinetic because there is energy transfer then electric because that's the finished result
Whic statements explain why rocks weather at different rates? Check all that apply
Explanation:
Weathering occurs one of three ways: through physical processes such as freezing and thawing, because of live organisms whose roots break rocks or through chemical processes that occur when carbon dioxide in the soil and air and mixes with water and specific minerals in rocks to form a weak acid that reduces rocks into silt, soil and sediment.
Chemical weathering typically increases as temperatures rise and rain falls, which means rocks in hot and wet climates experience faster rates of chemical weathering than do rocks in cold, dry climates.
Read all above and you may just find your answer!The partial symbol for a particular ion is 26M2+ What are the number of electrons contained in one ion
Answer:
24
Explanation:
26-2=24 because when an atoms loses 2 electrons it gains 2+ charge
What is this called? it might be sideways but it show look like a Y
Answer:
I'm thinking it might be Element 39: Yttrium, as this is Chemistry.
Explanation:
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY
EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers
Answer:
A. the valence electrons
Explanation:
Answer:
The valence electrons
Explanation:
The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!
~Good luck
What happens when you put an ice-pop outside? This is for the people who don’t know
Answer:
It melts
Explanation:
Answer:
It melts?
Explanation:
Is radium usually considered as part of the alkaline earth category in terms of chemistry?
Explanation:
Radium (atomic number 88) has similar properties to barium and is also in the Group 2 category. However, radium is a radioactive element and is generally under the category of radioisotopes in addition to being an alkaline earth metal, because it is not a stable element.
Two substances in a mixture differ in density and particle size. theses properties can be used to
Answer:
option 1. Two substances in a mixture differ in density and particle size. These properties can be used to separate the substances. These properties can be manipulated in order to have a better separation between the two substances.
Explanation:
Answer:
Two substances in a mixture differ in density and particle size. These properties can be used to separate both of them using the separating funnel or using filtration (filter paper).
Explanation:
Since their densities are different, one substance should float above the other in the mixture which allows for the separating funnel to let the substance sinking below (with the heavier density) to flow out first before changing the beaker to let the lighter substance flow out.
The substance with a bigger particle size would not be able to pass through the filter paper unlike the substance with the smaller particle size as the filter paper's pores is not big enough for it to pass through, separating both substances (with one on the paper and the other outside the filter paper, preferably in the beaker placed below the paper).
Complete the chart below for a patient that has diabetes. Use the words
Low, Normal, High, and None.
Body Part and System
Test Results
Mouth (digestive system)
Starch:
Oxygen:
Glucose:
Small intestine (digestive system)starch:
Oxygen
Glucose:
Lungs (respiratory system)
Starch:
Oxygen:
Glucose:
Cells
Starch:
Oxygen:
Glucose:
Answer:
It picked out for the best time for man to the earth for the earth and the earth in the moon to moon earth earth moon earth and moon earth moon and moon earth lord earth moon earth lord moon earth moon and earth moon earth lord lord moon earth moon lord moon earth lord moon lord
Explanation:
Cobalt (Co) has an atomic mass of 59 and an atomic number of 27. Which statement correctly describes an atom of cobalt?
A. An atom of cobalt contains more neutrons than protons.
B. An atom of cobalt contains more electrons than protons.
C. An atom of cobalt contains the same number of neutrons and protons.
D. An atom of cobalt contains the same number of neutrons, electrons and protons.
Answer:
A
Explanation:
27 us the number of protons when we subtract 27 from 59 it will be 32 because a mass number is the sum of proton and neutron but tell u more on the comment
Answer: A - An atom of cobalt contains more neutrons than protons.
Explanation: The atomic number is the number of protons in an atom. The atomic mass is the sum of protons & neutrons in an atom. So, with simple math we can figure out the number of neutrons. Total 59 - 27 protons = 32 neutrons. Which means that A is the only right answer in this case.
Little Extra: A & B would both be correct if Cobalt was a negatively charged ion. An atom is an ion if it is charged, and an ion is either negatively charged or positively charged. For example, if Cobalt had 27 protons & 26 electrons it's overall charge would be positive since it has more protons than electrons. And it would be negatively charged if Cobalt had 27 protons & 28 electrons. No charge if there are 27 protons & 27 electrons because proton +1 and electron -1. Imagine 27-27=0 no charge, 27-26= +1 charge, 27-28= -1 charge
I hope this made you smarter.
i need to know what occupied vs full means for chemistry
Need help!!! Don’t understand
what are the three things transported by global ocean circulation?
Answer:
The produce large circular currents in all the ocean basins. Currents, The North Equatorial Current, the Gulf Stream, the North Atlantic Current, and the Canary Current.
Explanation:
"Indicate in each whether the following electron configurations correspond to an atom in its ground state, excited state, or is impossible."
a. [tex]{1s}^{2} {2s}^{2} {2p}^{4} [/tex]
b. [tex] {1s}^{2} {2s}^{2} {2p}^{3} {2d}^{1} [/tex]
c. [tex] {1s}^{2} {2s}^{2} {2p}^{3}{3s}^{1} [/tex]
d. [tex] {1s}^{2} {2s}^{1} {2p}^{2} [/tex]
e. [tex] {1s}^{2} {2s}^{2} {2p}^{1} [/tex]
f. [tex] {1s}^{2} {2s}^{3} [/tex]
Please, I really need help. I don't know what to do...
Answer:
Explanation:
Firstly, let's define what ground and excited state electronic configuration.
Ground state electronic configuration is when the electrons of the atom are in there lowest possible energy level while excited state electronic configuration is when electron(s) have moved to a higher energy level. Examples of these are provided in the options
a. 1s²2s²2p⁴ - This is a ground state electronic configuration (of oxygen) because the electrons are in there lowest possible energy level.
b. This option is not displaying (it is displaying something like an image that isn't loading)
c. 1s²2s²2p³3s¹ - We can see from this that an electron jumped from 2p energy level to 3s (p energy level ought to be completely filled with 6 electrons before another electron moves to the next energy level) meaning the electron is in it's excited state thus this is an excited state electronic configuration (of oxygen).
d. 1s²2s¹2p² - We can see from this also that an electron jumped from the 2s energy level to the 2p energy level (making it 2p² instead of 2p¹ in the ground state). The 2s energy level should ordinarily have 2 electrons. Thus, this is an excited state electronic configuration (of boron).
e. 1s²2s²sp¹ - This is a ground state electronic configuration (of boron) since all the electrons are in there lowest possible energy level.
f. 1s²2s³ - This configuration is impossible because the s energy level should only contain a maximum of 2 electrons, thus impossible to have 3 electrons in the s energy level
Complete this sentence. If mass remains the same while the volume of a substance ________, the density of the substance will_______________.
(NOT GIVING BRAINLIEST, JUST ANSWERING A QUESTION MOST PEOPLE GOT WRONG ON)
A. decreases, decrease
B. increases, decrease
C. increases, stay the same
D. decreases, stay the same
**It's D**
Answer:
B. Increases, Decreases
Explanation:
I majored in Chemistry
what did bohr consider electrons as?
A. Discrete particles
B. Continuous particles
C. Particles with zero energy
D. None of the above
Answer:
D?
Explanation:
I think D hmm is the answer if I am wrong pls anyone or someone type the right answer but for me is d
Answer:
NOT D!!!!
Explanation:
I am taking the quiz on ck12, it is NOT "none of the above"
PLEASE HELP! ITS URGENT! I GIVE BRAINLY
Using the Law of Conservation of Matter, determine the number of grams of iron sulfide (FeS) that will be produced in this reaction.112g Fe + 64g S → _____ g FeS *
a. 48g
b. 64g
c. 112g
d. 176g
Answer:
Its C
Explanation:
If you think about it logically all the other answers don't make sense A and B are to small of a number And D is to Big of a number
Hope this Helps!!
Apple juice can be classified as which of the following?
O A compound
An Element
O A mixture
O A pure substance
Answer:
mixture
Explanation:
Answer:
Mixture
Explanation:
Good day pleases help
Order the following elements from Highest to Lowest Electronegativity.
K, Sc, Ca, Zn, Br
Sc, K, Br, Zn, Ca
OK, Ca, Sc, Zn, Br
O Br, Zn, Sc, Ca, K
Ca, Zn, Br, K, SC
Answer:
O, Ca, Zn, Br
Sc, K, Br,
Explanation:
The correct order of the chemical elements from highest to lowest electronegativity is: C. Br, Zn, Sc, Ca, K.
Electronegativity refers to a measure of the ability of an atom of a chemical element to attract any shared pair of electrons.
Generally, the electronegativity of a chemical element typically increases across the period from left to right.
In Chemistry, the electronegativity of some of the chemical element are:
Bromine (Br) = 2.96Calcium (Ca) = 1.0Zinc (Zn) = 1.65Potassium (k) = 0.82Scandium (Sc) = 1.36Hence, the order of the chemical elements from highest to lowest electronegativity is:
1. Bromine (Br) = 2.96
2. Zinc (Zn) = 1.65
3. Scandium (Sc) = 1.36
4. Calcium (Ca) = 1.0
5. Potassium (k) = 0.82
Read more: https://brainly.com/question/18214726
What is the minimum number of kiloJoules needed to change 40.0 grams of water at 100C to steam at the same temperature and pressure
Answer:
90.4Kg
Explanation:
The energy required= latent heat of vaporization
Latent heat of vaporization of water= 2260 KJ/Kg
Mass of water = 0.04 Kg
Heat required= 0.04Kg× 2260 KJ/Kg
Heat required= 90.4Kg
Answer: The minimum number of kilo Joules needed is 90.4KJ.
Explanation:
The energy required= latent heat of vaporization.
Latent heat of vaporization of water= 2260 KJ/Kg
Mass of water = 0.04 Kg
Heat required= 0.04Kg× 2260 KJ/Kg
Heat required= 90.4KJ.
Learn more: https://brainly.com/question/2477358
PLEASE HELP ME MY MOM COMES HOME SOON!! ITS 4AM!!
Blaire is teaching her little brother to ride his bike. She uses 7 N of force to push a 14 kg bike. What is the acceleration?
98 m/s2
0.5 m/s2
21 m/s2
2 m/s2
Answer:
The solution is
Explanation:
a = f/m
a =7/14
a=1/2
a=0.5
Acceleration of bike is 0.5 m/s²
Given that:Force used in push = 7 N
Mass of bike = 14 kg
Find:Acceleration of bike
Computation:Force = Mass × Acceleration
Force used in push = Mass of bike × Acceleration of bike
7 = 14 × Acceleration of bike
Acceleration of bike = 7 / 14
Acceleration of bike = 0.5 m/s²
Learn more:https://brainly.com/question/16685492?referrer=searchResults
(oh no)
What is the mass of silicon when there are 1.8 x 10^21 atoms of silicon?
Answer:
Mass = 0.084 g
Explanation:
Given data:
Mass of silicon = ?
Number of atoms of silicon = 1.8 × 10²¹ atom
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
1.8 × 10²¹ atom × 1 mole / 6.022 × 10²³ atoms
0.299× 10⁻² mol
0.00299 mol
Mass of silicon:
Mass = number of moles × molar mass
Mass = 0.00299 mol × 28.1 g/mol
Mass = 0.084 g