chemical formular of ammonium tetraoxosulphate 4
​

Answer:

None. Electrons are not in the nucleus.

Explanation:

We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus. Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.

Symbol of proton= P⁺  

Symbol of neutron= n⁰  

The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons. The umber of protons and electrons are always equal to make the atom electrically neutral .

The atom having atomic number 16 have 16 electrons and these electrons are present out side the nucleus.

Answer:

2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)

General Formulas and Concepts:

Explanation:

Step 1: RxN

HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + H₂O (l)

Step 2: Balance RxN

2HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + 2H₂O (l)

Step 3: Ionic Equations

Total Ionic Equation:

2H⁺ (aq) + 2NO₃⁻ (aq) + Ca²⁺ (aq) + 2OH⁻ (aq) → Ca²⁺ (aq) + 2NO₃⁻ (aq) + 2H₂O (l)

Cancel out spectator ions.

Net Ionic Equation:

2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)

Answer:

1.B

2.A

3. B

Explanation:

1. A chemical bond is the physical phenomenon of chemical substances being held together by attraction of atoms to each other through sharing

2. so 2 is electrons of one atom are transferred permanently to another atom.meaning the answer is A

3. is When atoms combine by forming covalent bonds, the resulting collection of atoms is called a molecule. We can therefore say that a molecule is the simplest unit of a covalent compound.

A chemical bond is an attraction between two atoms.

A ionic bond is A bond formed when atoms transfer electrons.

Answer:

D. gravity

hope this helps

Answer:

Zamir walked

27

meters and Talia walked

19

meters.

Explanation:

27 and 19

Answer:

zamir:27  Talia:19

Explanation:

i got it right on my test :)

a. P=0.971 atm=737.6 mmHg

b. n=2.88 x 10⁻³

Dalton's law of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases

[tex]\tt P_T=P_1+P_2+..P_n[/tex]

A. vapor pressure of water at 22.5 = 20.4 mmHg

Pt=P H₂ + P H₂O

758 = P H₂ + 20.4

P H₂=737.6 mmHg=0.971 atm

B.Ideal gas Law = PV=nRT

P = 0.971 atm

V = 72 ml = 0.072 L

R = 0.082 L/atm mol

T = 22.5 + 273.15 =295.65

[tex]\tt n=\dfrac{0.971\times 0.072}{0.082\times 295.65}=2.88\times 10^{-3}[/tex]

Answer:

12.044  × 10²³ atoms of oxygen

Explanation:

Given data:

Number of atoms of oxygen = ?

Moles of oxygen = 2 mol

Solution:

Avogadro number:

It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.  The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³ atoms of oxygen

2 mole × 6.022 × 10²³ atoms of oxygen / 1 mole

12.044  × 10²³ atoms of oxygen

Answer:

Increasing the speed of the particles

Explanation:

The energy absorbed in the phase B is used to increase the speed of the particles.

We can see a positive slope which shows that the temperature is increasing considerably with increasing time.

At this phase the reaction rate is become faster as the temperature change has a considerable effect on reaction rates.

Temperature is directly proportional to the average kinetic energy of reacting particles.

Answer:

heat, electrical, mechanical, nuclear,sound

Explanation:

The power plant is mechanicalised so it produce heat which is in form of electrical and then we start hearing sound

Answer:

Copper, a metal known since ancient times, is used in electrical cables and pennies, among other things. ... Calculate the average atomic mass of copper. ... The atomic masses of the two stable isotopes of boron 10B (19.78%) and 11B (80.22%) are 10.0129 amu ... (.1978)(10.0129 amu) + (.8022)(11.0093 amu) =10.81 amu.

Explanation:

I hope I help :)

Answer:

52.2. The large chicken egg minus the human head is 52.2 g. The egg is not a good model because it does not resemble a human head. Also, the egg is made of parts such as food and things that are not similar to a human head. Furthermore, they are not the same shape.

Explanation:

J.J. Thomson's plum pudding model of the atom followed the discovery of negatively charged particles with a very small mass. Thus, the correct option for this question is A.

J.J. Thomson was a British physicist who discovered sub-atomic particles known as electrons within an atom. He also announced that atoms are made up of smaller components.

The plum pudding model is defined by Thomson in order to demonstrate that negatively charged sub-atomic particles known as electrons are surrounded by a volume of positively charged particles known as protons. It is one of the historical scientific model of the atom that governs all sorts of properties of sub-atomic particles.

Therefore, "negatively charged particles with a very small mass" is the discovery that follows J.J. Thomson's plum pudding model of the atom. Thus, the correct option for this question is A.

To learn more about the Plum pudding model, refer to the link:

https://brainly.com/question/4839193

#SPJ2

Answer:

[tex]M_2=3.34x10^{-3}M[/tex]

Explanation:

Hello!

In this case, since a dilution process implies that the moles of the solute remain the same before and after the addition of diluting water, we can write:

[tex]M_1V_1=M_2V_2[/tex]

Thus, since we know the volume and concentration of the initial sample, we compute the resulting concentration as shown below:

[tex]M_2=\frac{M_2V_2}{V_1} =\frac{45.45mL*0.0404M}{550.00mL}\\\\M_2=3.34x10^{-3}M[/tex]

Best regards!

Answer:

-1.94  * 10^-18 J

Since the electron moved from a higher to a lower energy level (n = 3 → n = 1) it is an emission.

Explanation:

From Rydberg equation;

E = -RH(1/n^2final - 1/n^2initial)

For a transition from  n = 3 → n = 1

RH = 2.18 * 10^-18 J

E = -(2.18 * 10^-18) (1/1^2 - (1/3^2)

E = -(2.18 * 10^-18) (1-1/9)

E= -(2.18 * 10^-18) (8/9)

E = -1.94  * 10^-18 J

Answer: B. It increases quickly

Explanation:

As the bromine gas in a container is heated over a flame, the average kinetic energy increases quickly.

The temperature of gas molecules is the measure of average kinetic energy of the gas molecules.

The increase in temperature increases the heat gained by the gas molecules which in turn increases the average kinetic energy of the individual gas molecules.

Thus, as the bromine gas in a container is heated over a flame, the average kinetic energy increases quickly.

Learn more about average kinetic energy of gases here: https://brainly.com/question/952575

The number of oxygen atoms = 3

Mass = 24 g

The formula of a compound shows the composition of the constituent elements

CaCO₃ is composed of 3 types of elements, namely Ca, C and O

The amounts of each of these elements in the compound CaCO₃:

So the number of oxygen atoms = 3

mass of Oxygen :

[tex]\tt mass~O=\dfrac{3\times Ar~O}{MW~CaCO_3}\times mass~CaCO_3\\\\mass~O=\dfrac{3\times 16}{100}\times 50=24~g[/tex]

Answer:

1234567i9812345678912121212121

Answer:

idek akxkkwskkd nwkdkekekd

Answer: C

Explanation:

I took a quiz on this.

Answer:

what e said

Explanation:

Answer:

Na2HPO4

Explanation:

The chemical formula for Copper I Monohydrogen Phosphate is CuHPO₄.

Let's break down the formula to understand it better:

1. "Cu" represents copper, which is an element with the atomic symbol Cu. Copper is a transition metal that is commonly used in electrical wiring and plumbing.

2. "H" represents hydrogen, which is an element with the atomic symbol H. Hydrogen is the lightest and most abundant element in the universe.

3. "PO₄" represents the phosphate ion, which is composed of one phosphorus atom (P) and four oxygen atoms (O). The phosphate ion is commonly found in biological systems and is an essential component of DNA, RNA, and ATP.

So, when  combined one copper atom (Cu), one hydrogen atom (H), and one phosphate ion (PO₄),  get the formula CuHPO4, which represents Copper I Monohydrogen Phosphate.

It's important to note that the "I" in Copper I refers to the charge of the copper ion in this compound. Copper can form different ions with different charges, and the Roman numeral indicates the charge of the copper ion in this particular compound.

Thus,  chemical formula for Copper I Monohydrogen Phosphate is CuHPO₄.

Learn more about chemical formula,here:

https://brainly.com/question/32018188

#SPJ4

Answer:

w/w means weight/weight

Therefore, in a 250 g of solution, 5% needs to be KCl,  

i.e. 5% x 250 = 12.5 g of KCl is needed.

The masses of KCl and H2O are needed to make 250 g of 5.00 % solution is 12.5 g of KCl and 237.50 g of H2O.

Since there is the solution of 250 g of 5.00 % solution

So, here

Mass of KCl is = 5% of 250 = 12.5 g

And, the mass of H2O is

= 250 - 12.5g

= 237.50 g

Hence, The masses of KCl and H2O are needed to make 250 g of 5.00 % solution is 12.5 g of KCl and 237.50 g of H2O.

Learn more about mass here: https://brainly.com/question/18470727.

Answer:

4 moles

Explanation:

The formula of finding moles is

moles = mass / molar mass, therefore

moles = 160 g / 40 g/mol = 4 moles

Answer:

AlCl₃

General Formulas and Concepts:

Explanation:

Step 1: Define

Al³⁺ and Cl¹⁻

Step 2: RxN

Al³⁺ (s) + Cl¹⁻ (g) → AlCl₃

Answer:

The answer is: AlCl₃

Hope this helped :)))

Explanation:

Answer:

True

Explanation:

Mixtures are substances with indefinite composition. They consist of two or more elements  and or compounds in any proportion by mass.

From these properties we can clearly identify that to separate mixtures, we use the differences in the chemical properties of the constituents of the mixtures.

Answer:

Gneiss forms by regional metamorphism from both high temperature and pressure. Quartzite and marble are the most commonly used metamorphic rocks.