cellus
A student measures the acidity of a solution and
concludes that it has a pH of 2.70. However, the
seller claims that its pH is 3.20. What is the
percent error in the student's measurement?

Answer:

a theory of a experiment and the experiment acts like a judge determining if the hypothesis is right or wrong from the final test result

Explanation:

Answer:

15 millimeters

Explanation:

the other answer choices are too large.

Answer:

15 millimeters

Explanation:

The other options are too long.

This problem is providing describing a room in which air has a total pressure of 0.987 atm and the partial pressure of nitrogen is asked, turning out to be 0.746 atm.

In such a case, we can start by looking at the provided table, which shows the composition of dry air in mass basis, which means we must convert the composition of nitrogen to mole fraction by knowing that the average molar mass of air is 28.9647 g/mol, and thus, we infer that the mole fraction of nitrogen in air is about 0.755 according to:

[tex]x_{N_2}=\frac{0.781*14.0067g/mol*2}{28.9647g/mol} =0.755[/tex]

Then, we recall the Dalton's law version that relates total pressure, partial pressure and mole fraction written for nitrogen:

[tex]P_{N_2}=x_{N_2}P[/tex]

Finally, we plug in the previously calculated mole fraction and the total pressure of air to obtain:

[tex]P_{N_2}=0.755*0.987 atm\\\\P_{N_2}=0.746atm[/tex]

Learn more:

Answer:

How will the ingredients effect the fermentation of each bottle? What will happen to the bottles and balloons when fermentation occurs?

Explanation:

Answer: 2

Explanation:I think

Answer:

Our process will be to change the mass of NO2 to moles by dividing by the molar mass, and then we multiply the number of moles with Avogadro's number (6.02 x 10^23)

Molar mass of NO2 = (14) + (16)x2 = 46g/mol

45.8/46 = 0.99 or just 1 mole when you round it.

Now just multiply the moles with Avogadro's number

1 x (6.02 x 10^23)

= 6.02 x 10^23 molecules of NO2 reside in 45.8g of NO2

We can convert strontium-82 to rubidium-82 by positron emission.

The three main fundamental subatomic particles in an atom are;

In a neutral atom, the number of protons is always equal to the number of electrons.

In strontium-82, there are 44 neutrons, 38 electrons and 38 protons. In rubidium-82, there are 45 neutrons, 37 electrons and 37 protons. We can convert  strontium-82 to rubidium-82 by positron emission.

Learn more about positron emission: https://brainly.com/question/11594309

Explanation:

getting the empirical formula

For carbon

3.01/12 = 0.2508

For oxygen

4/16 = 0.25

For Cl

17.81/35.5= 0.501

0.2508 ÷ 0.25 = 1.0032

0.25 ÷ 0.25 = 1

0.501 ÷ 0.25 = 2.004

Empirical formula of the compound = CCl20

Molar mass = (1×12) + (2×35.5) + (1×16)

= 12 + 71 + 16

= 99g/mol

percentage composition= 24.81/99 × 100

= 25.06%

A 24.81-g sample of a gaseous compound containing only carbon, oxygen, and chlorine is determined to contain 3.01 g C, 4.00 g O, and 17.81 g Cl. the compound's percent composition is  25.06%.

The impure form of carbon is Amorphous which is used for the manufacture of car batteries and dry cells, ink and paints; So the majority element of carbon is present in charcoal, so these are used as fuel.

Graphite is derivative form of carbon used as a lubricant in heavy industrial machinery, making pencil leads, these carbon are used in the production of steel.

The empirical formula, For carbon 3.01/12 = 0.2508

For oxygen 4/16 = 0.25, For Cl 17.81/35.5= 0.501, 0.2508 ÷ 0.25 = 1.0032

0.25 ÷ 0.25 = 1

0.501 ÷ 0.25 = 2.004

Empirical formula of the compound = CCl20

Then the Molar mass = (1×12) + (2×35.5) + (1×16)

= 12 + 71 + 16

= 99g/mol

percentage composition= 24.81/99 × 100

= 25.06%

Learn more about carbon, here:

https://brainly.com/question/3049557

#SPJ6

Answer:

the Answer is A B D

Explanation:

the cunduction in the spoons are equal to all the following answers

Conduction occurred more readily in the tin due to its lower specific heat capacity, Heat transfer via conduction occurred from the hot water to the spoons and then to the butter, The atoms in the tin spoon vibrated and collided at a greater rate thon those in the wood or plastic spoons. Thus option A,B, D are correct.

Specific heat can be measured as the quantity of heat required to increase the temperature of one gram of a substance by one degree Celsius.

The units of specific heat  are represented as calories or joules per gram per Celsius degree such as the specific heat of water is 1 calorie  per gram per Celsius degree

Specific heat capacity= Heat quantity/ mass × change in temperature.

If Q is the quantity of heat in joules, M is the mass of substance heated,

If ∆O is the change in temperature in Kelvin, Then Q= MC∆O, C is a constant called Specific heat capacity. Therefore, making C the subject of formula:

C= Q /M∆O

Thus option A,B, D are correct.

Learn more about specific heat, here:

https://brainly.com/question/15177263

#SPJ2

Answer:

The role of indicator in titration is to detect the endpoint of the titration. When the colour of the solution changes, it indicates that the concentration of the chemical specie has reached a critical range. This change in colour is possible with the help of indicators.

Explanation:

hope it helps

#carry on learning and keep safe

correct me if I'm wrong and if correct brainliest me please

Answer:

A reactant is a substance that is present at the start of a chemical reaction. A product is a substance that is present at the end of a chemical reaction.

Explanation:

Its A. Explanation:I just know

The four isomers of C4​H9​OH are

As refer to IMAGE 01- Butan−1−ol

As refer to IMAGE 02- Butan−2−ol

As refer to IMAGE 03- 2−methylpropan−2−ol

As refer to IMAGE 04- 2−methylpropan−1−ol

solution

https://www.toppr.com/ask/en-gb/question/write-down-all-isomers-of-c4-h9oh/

Answer:

The lack of accuracy and underestimation of absorbance readings obtained from the colorimeter can be contributed to many experimental factors. One plausible error is from the imperfection of the absorber, in that it may not completely absorb the stray light passing by the perimeters of the photoresistor.

Explanation:

In practice there are other sources of error, such as environmental effects on photometer and sample, temperature, line voltage fluctuations, vibrations, contamination, or heating of the sample by the photometer. All these factors may impair the measured result, and ways and means are known to test and eliminate them.

Using the solubility product of the saturated solution, the mass of BaF2 dissolved is 0.083 g.

The equation of the reaction is obtained from;

BaF2(s) ⇄ Ba^+(aq) + F^-(aq)

The concentration of the substance can be obtained from the Ksp as follows;

Ksp = [Ba^2+] [2F^-]^2

Ksp = 4x^3

x = ∛Ksp/4

x = ∛ 1.00 x 10-6/4

x = 6.3  x 10^-3 M

Given that;

mass/molar mass = concentration x  volume

molar mass  = 175 g/mol

concentration  = 6.3  x 10^-3 M

volume = 75.0 ml or 0.075 L

Mass = ?

Mass  = concentration x  volume x molar mass

Mass  = 6.3  x 10^-3 M x  0.075 L x   175 g/mol

Mass = 0.083 g

Learn more about solubility product: https://brainly.com/question/857770

Typical examples of solutions are

A solution can be defined as a mixture (homogeneous) of two or more substances typically a solute in a solvent, the solvent is usually in greater quantity and the substance or substances present in lesser amounts are the solutes.

Common examples of solutions are  sugar in water and salt in water solutions, soda water,

Furthermore, solutions can be homogenous or heterogenous

Learn more about solutions here:

https://brainly.com/question/2626617

Answer:

Ye? everything is made up of atoms so sure

Answer:

A solid has definite volume and definite shape, a gas has neither definite volume nor definite shape, and as said in the question, a liquid has a definite volume but no definite shape.

What this means is that even though liquid molecules can slide past each other and move to fill up the space they are in (this means that liquids have no definite shape), they keep their volume. That is, liquids have consistent, unchanging volume.

Hopefully that's helpful! :)

Density of a liquid determines how it will layer (heaviest to lightest). If the liquid is least dense it will float to the bottom. Layers will remain separated because each liquid is actually floating on top of the more dense liquid beneath it.

To keep burning, fires require oxygen. Carbon dioxide is used in certain fire extinguishers to put out flames. Explanation: Because magnesium is higher on the reactivity scale than carbon, it is more reactive and eliminates oxygen from carbon dioxide (to give carbon and magnesium oxide).

Answer: protons

Explanation:

a) Neutrons are located in the nucleus but have a negative charge.

b) Atoms are not subatomic particles but are rather made of subatomic particles.

c) Electrons are subatomic particles with a negative charge that are located outside of the nucleus.

d) Protons are subatomic particles that are located in the nucleus and have a positive charge.

Answer:

21. D (Food moves into the small intestine.)

22. C (Food is stored and further broken down by acid and powerful enzymes.)

23. A (Your saliva helps break down what you're eating and turn it into chemicals called enzymes.)

24. B (...Food moves through your esophagus.)

25. E (Anything left in the small intestine moves into the large intestine.)

Explanation:

Food first enters the mouth where it is chewed and broken down by salivary amylase. Then, it is swallowed, moving down the esophagus to the stomach where it is stored and further broken down by acids and enzymes. And, these broken down food molecules moves into the large intestine.

Answer:

Atoms of these elements have full outer electron shells. These atoms are stable and very rarely form bonds with other atoms. If the electronegativity values between two atoms are comparable, they may still form chemical bonds to increase the stability of their valence electron shell

Explanation:

Answer:

did u get the answer yet

Explanation:

Answer:

Most of the elements in the periodic table are metals.

Hope that helps. x

Answer:

Here is your answer,mate!

Explanation:

Metals are the most of the elements in the periodic table.

Answer:

Liquids

Explanation:

They have a certain volume but they take the shape of their container

Answer:

b. because its Rigel star

Explanation:

hope itsattachments