can someone help with this

Therefore , the solution of the given problem of area comes out to be

A = 16 is the equation that accurately depicts how to calculate the sector's area.

Its total size can be determined by figuring out how much space is required to completely cover the outside. The immediate surroundings are taken into consideration when calculating the surface of a trapezoidal shape. The total measurements of something are determined by its surface area. A cuboid's capacity for internal water is determined by the sum of the borders that link all of it's six rectangle edges.

Here,

The formula for calculating a circle's sector's area is:

=> A = (θ/360) x πr²

where A is the sector's area, is its central angle measurement, and r is the circle's radius.

Since the radius is 8 cm and the central angle is 90 degrees in this instance, we can reduce by plugging in these values:

=> A = (90/360) x π(8²)

=>  A = (1/4) x π(64)

=>  A = π(16)

=>  A = 16π

A = 16 is the equation that accurately depicts how to calculate the sector's area.

The answer will be given in radius squared units, in this case, cm2.

To know more about area visit:

https://brainly.com/question/2835293

#SPJ1

Option D. The correct calculation of the area of the sector is      [tex]A=(\frac{90}{360}) * (\pi 8^{2} )[/tex]

An area of the sector is the portion of the area of a circle that is enclosed by two radii and an arc. The area of a sector can be found using the formula:

A = (θ/360)πr²

where A is the area of the sector, θ is the central angle of the sector (in degrees), π is a mathematical constant approximately equal to 3.14, and r is the radius of the circle.

Given, the radius is 8 cm and the central angle is 90° in this instance, put all these values:

[tex]A=(\frac{90}{360}) * \pi (8^{2} )[/tex]

or we can write down, [tex]A=(\frac{90}{360}) * (\pi 8^{2} )[/tex]

To know more about area, visit:

brainly.com/question/2835293

#SPJ1

For the given elementary chemical reaction, the solution to the question is: C = a^2 * (1-t^2/400(1-a))

The question asks about calculating the concentration of C in a chemical reaction. Given that the reaction equation is as follows: A + B → C The rate of reaction can be expressed as: dc/dt = k[A][B] Where, k is the rate constant[A] is the concentration of reactant A in moles/L[B] is the concentration of reactant B in moles/L, c is the concentration of product C in moles/L

The initial concentration of A and B is [A] = a moles/L, [B] = b moles/L Let r be the rate of reaction, i.e. r = dc/dt Thus, using the equation r = k[A][B], we get r = k(a)(b)Now, we can write a differential equation for the concentration of C as follows: dc/dt = r, with initial concentration of C as 0 moles/L∴ dc/dt = kab

Substituting r = k(a)(b) in the equation, we get dc/dt = kabdc/db = kab*dt Differentiating both sides, we get, ln(C) = kab*t + C where C is a constant, ln(C) = ln(a^2) = 2ln(a) = C When a = b, the concentration of C will be maximum at t = (1/k)(ln(a)).

Thus the concentration of C as a function of time (when a = b) is given by C = a^2 * (1-t^2/2)If [C] = a after 20 seconds, then using the equation, we get a = a^2 * (1 - 20^2 * k^2/2)Therefore, 1 = a * (1 - 200k^2) Solving this equation for k, we get, k = ± sqrt[(1-a)/200a^2] For the positive value of k, the concentration of C as a function of time is given by C = a^2 * (1-t^2/400(1-a)).

To know more about elementary chemical reaction, refer here:

https://brainly.com/question/31022212#

#SPJ11

Answer:

Step-by-step explanation:

The domain is found by setting the denominator equal to 0 and solving for y. This value of y gives you the values that cause the denominator to go to 0, which is a problem. In this rational expression, there are no real numbers that cause the denominator to go to 0, so the domain is all real numbers.

The equivalent expressions of [tex]x^3[/tex] are[tex]\frac{(x ^ 6)}{(x ^ 3)}[/tex]and [tex]\frac{(x^{-3}) }{(x^{-6}) }[/tex], the expressions [tex]\frac{(x^{30}) }{(x^{10})}[/tex] and [tex]\frac{(x ^ 4) ^ 2)}{x ^ 2}[/tex] are not equivalent to [tex]x^3[/tex].

What are equivalent expressions?

Equivalent expressions are different algebraic expressions that have the same value when evaluated for a particular set of variables.

The equivalent expressions  [tex]x^3[/tex] are:

[tex]\frac{(x ^ 4) ^ 2)}{x ^ 2}[/tex] : This expression can be simplified as follows:

=[tex]\frac{(x ^ 4) ^ 2)}{x ^ 2}[/tex]

= [tex]\frac{(x ^ 8)}{(x ^ 2) }[/tex]

=[tex]x^{8-2}[/tex]

= [tex]x^6[/tex]

[tex]\frac{(x ^ 6)}{(x ^ 3)}[/tex] : This expression can be simplified as follows:

=[tex]\frac{(x ^ 6)}{(x ^ 3)}[/tex]

= [tex]x^{6-3}[/tex]

=[tex]x^3[/tex]

[tex]\frac{(x^{30}) }{(x^{10})}[/tex] : This expression can be simplified as follows:

=[tex]\frac{(x^{30}) }{(x^{10})}[/tex]

=[tex]x^{30-10}[/tex]

=[tex]x^{20}[/tex]

[tex]\frac{(x^{-3}) }{(x^{-6}) }[/tex] : This expression can be simplified as follows:

=[tex]\frac{(x^{-3}) }{(x^{-6}) }[/tex]

=[tex]x^{-3-(-6)}[/tex]

=[tex]x^{-3+6}[/tex]

=[tex]x^{3}[/tex]

Therefore, the equivalent expressions of [tex]x^3[/tex] are[tex]\frac{(x ^ 6)}{(x ^ 3)}[/tex]and [tex]\frac{(x^{-3}) }{(x^{-6}) }[/tex] , the expressions [tex]\frac{(x^{30}) }{(x^{10})}[/tex] and [tex]\frac{(x ^ 4) ^ 2)}{x ^ 2}[/tex] are not equivalent to [tex]x^3[/tex].

To know more about equivalent expressions visit:

brainly.com/question/17499155

#SPJ1

Based on the principle of Inequality, Attached image is a graph of the inequality for  |x| < 5. The red region is the solution set.

A mathematical statement known as an equation demonstrates the relationship between two or more numbers and variables by utilizing mathematical operations such as addition, subtraction, multiplication, division, exponents, and so forth.

Therefore, An expression that demonstrates a non-equal comparison of numbers and variables is called an inequality. So, the graph that best represents this solution set is a number line with open circles at x = -5 and x = 5 and a shaded region in between, indicating that all values of x within this range satisfy the inequality.

Find more on equation at:

https://brainly.com/question/2972832

#SPJ1

Answer:

It depends on the values of x and y. If x is positive and y is negative, then option A (x + y) would have a negative value. If y is greater than x, then option B (x - y) would have a negative value. If either x or y (or both) is negative, then option C (x*y) could have a negative value. Option D (x/y) could also have a negative value if x is negative and y is positive, or if both x and y are negative.

Answer:

Step-by-step explanation:

B because it has subtraction

The height, in meters, where the pumpkin lands on the hill is 4.9 meters.The equation for the height of the hill is y = 0.9x.

This equation can be rearranged to solve for x, giving x = y/0.9. The equation for the height of the pumpkin is y = -0.1x² + 4.9x. Substituting the x value from the previous equation into the equation for the height of the pumpkin gives y = -0.1(y/0.9)² + 4.9(y/0.9). Simplifying this equation gives y = 4.9, which is the height, in meters, where the pumpkin lands on the hill.

The equation for the height of the hill is y = 0.9x, which describes the incline of the hill. This equation can be rearranged to solve for x, giving x = y/0.9. This equation can then be used to substitute into the equation for the height of the pumpkin, which is y = -0.1x² + 4.9x. When the x value from the previous equation is substituted into the equation for the height of the pumpkin, the equation simplifies to y = -0.1(y/0.9)² + 4.9(y/0.9). Simplifying further gives y = 4.9, which is the height, in meters, where the pumpkin lands on the hill. This can be verified by substituting 4.9 for y in the equation for the height of the hill, which gives x = 4.9/0.9 = 5.4. This value can be substituted into the equation for the height of the pumpkin, which gives y = -0.1(5.4)² + 4.9(5.4) = 4.9, verifying the result.

Learn more about equation here

https://brainly.com/question/29657992

#SPJ4

Probability 0.919

The probability that the pooled sample variance, S2p, is less than 6.9157 is given by:

P(S2p < 6.9157) = P(S2p - S20 < 6.9157 - S20)

where S20 = ((n1-1)S21 + (n2-1)S22)/(n1+n2-2)



Here, n1 = 10 and n2 = 11. The individual sample variances S21 and S22 are both equal to 4, since both X and Y are samples from N(μ, 4).


Therefore, S20 = ((10-1)4 + (11-1)4)/(10+11-2) = 4.


Hence, P(S2p < 6.9157) = P(S2p - 4 < 6.9157 - 4) = P(S2p - 4 < 2.9157)


The probability can be computed using a chi-square cumulative distribution table. We obtain:

P(S2p - 4 < 2.9157) = 0.919.

Learn more about probability

brainly.com/question/30034780

#SPJ4

The Probability P(Sp² ​<6.9157) is 0.6672.

To solve this problem, we need to first recognize that the statistic Sp² follows a chi-squared distribution with 10+11-2 = 19 degrees of freedom, where:

Sp² = [(nX-1)*SX² + (nY-1)*SY²]/(nX+nY-2)

Here, nX = 10, nY = 11, SX² is the sample variance of X and SY² is the sample variance of Y.

Since X and Y are both normally distributed, we know that the sample variances SX² and SY² follow chi-squared distributions with 9 and 10 degrees of freedom, respectively, and scaled by the common variance sigma² = 4.

So we have:

SX² ~ chi-squared(9)*4 = chi-squared(36)

SY² ~ chi-squared(10)*4 = chi-squared(40)

Now we can use the fact that the sum of two independent chi-squared random variables with k1 and k2 degrees of freedom follows a chi-squared distribution with k1+k2 degrees of freedom.

Therefore, Sp² = [(nX-1)*SX² + (nY-1)*SY²]/(nX+nY-2) follows a chi-squared distribution with 9+10 = 19 degrees of freedom and scale parameter 4/(nX+nY-2) = 4/19.

To find P(Sp² < 6.9157), we can use a chi-squared distribution table or calculator. Using a chi-squared calculator, we find:

P(Sp² < 6.9157) = 0.6672

Therefore, the probability that Sp² is less than 6.9157 is 0.6672.

Learn more about probability at https://brainly.com/question/13796819

#SPJ11

Answer:

Step-by-step explanation:

rise is up and run is over.

The first number would be y and the second number would be x

and x is run

y is rise.

Answer:

-25

Step-by-step explanation:

simplification using BODMAS

[tex]-5 * 4 + -5[/tex]
-20 - 5
= -25

The solution of the system is a = -1, b = 1, c = 0, and d = -3.

To find the cubic function f(x) = ax³ + bx² + cx + d that satisfies the given equations by using a system of equations and solving the system using matrices, we proceed as follows:Equations for the given cubic function:f(-2) = a(-2)³ + b(-2)² + c(-2) + d = -7 ...(1)f(-1) = a(-1)³ + b(-1)² + c(-1) + d = 2 ...(2)f(1) = a(1)³ + b(1)² + c(1) + d = -4 ...(3)f(2) = a(2)³ + b(2)² + c(2) + d = -7 ...(4)The matrix form of the system of equations is given by AX = B, whereA = [(-2)³ (-2)² -2 1; (-1)³ (-1)² -1 1; (1)³ (1)² 1 1; (2)³ (2)² 2 1],X = [a; b; c; d], andB = [-7; 2; -4; -7].The augmented matrix form of the system of equations is given by [A|B] = [(-2)³ (-2)² -2 1 -7; (-1)³ (-1)² -1 1 2; (1)³ (1)² 1 1 -4; (2)³ (2)² 2 1 -7].Performing the row operations, we get the row echelon form of the augmented matrix as follows:[A|B] = [1 0 0 0 -1; 0 1 0 0 1; 0 0 1 0 0; 0 0 0 1 -3].Therefore, the solution of the system is a = -1, b = 1, c = 0, and d = -3.Hence, the cubic function f(x) = ax³ + bx² + cx + d that satisfies the given equations is given by f(x) = -x³ + x² - 3.

Learn more about System of equations

brainly.com/question/12895249

#SPJ11

Answer:

[tex]x^{2}[/tex]

Step-by-step explanation:

x*x=[tex]x^{2}[/tex]

Answer:

No

Step-by-step explanation:

[tex]\frac{6}{5}=1.2[/tex]

[tex]\frac{4}{3} =1.33[/tex]

[tex]\frac{6}{5} < \frac{4}{3}[/tex]

Hope this helps.

Answer:

No

Step-by-step explanation:

6/5=4/3

18=20

9≠10

Answer:

-16²+1,000 > 300  [After an edit in the original expression, as noted below).

Step-by-step explanation:

The equation d = -16² +1,000 tells us the height above ground, d, of the object after t seconds.  When t = 0 seconds, the ball has not been dropped yet, but the equation tells us that d = 1,000 at t = 0.  That means the object starts at 1,000 feet above ground.

We want the time it takes for the object to reach any height greater than 300 feet above ground.  This is a tad (metric for just a tiny bit) unexpected, since even at time of 0 the object is greater than 1,000 feet.

Looking at the answer options, note that the left side of the inequalities is -16^2+100.  I will assume the 4th option has a typo:  the f^2.  It should read the same as the others.  

      -16^2+100 is the distance, d.  So to help us think this through, let's rephrase the answer options in terms of distance, d:

1)    d<300

2)   d≤300

3)   d≥300

4)   d>300

   The question asks "We want the time it takes for the object to reach any height greater than 300 feet above ground."

Option 4 says d>300, or height greater than 300.  That is the inequality that matches the question.  [Note:  It did not say greater than or equal to (option 3).]

a) 1/2, b) 1/4, c) 3/13, d) 7/26 (fraction of black and face cards) in a traditional Western pack of playing cards.

A traditional Western pack of playing cards consists of four suits: Hearts (colored red), Diamonds (colored red), Spades (colored black), and Clubs (colored black). Each suit has 13 cards: Ace, 2, 3, 4, 5, 6, 7, 8, 9, 10, Jack, Queen, and King.

a) To find the fraction of the playing cards that are red, we need to add up the number of red cards and divide by the total number of cards in the deck. There are two red suits, Hearts and Diamonds, and each has 13 cards. So there are 26 red cards in total. Since there are 52 cards in a deck, the fraction of red cards is 26/52 or 1/2.

b) To find the fraction of cards that are Diamonds, we simply divide the number of Diamonds (13) by the total number of cards (52). This gives us a fraction of 13/52 or 1/4.

c) To find the fraction of face cards, we need to add up the number of face cards and divide by the total number of cards in the deck. In each suit, there are three face cards: King, Queen, and Jack. So there are 12 face cards in each deck (4 suits x 3 face cards per suit). Therefore, there are 12/52 or 3/13 face cards in the deck.

d) To find the fraction of black and face cards, we need to count the number of black cards and the number of face cards that are also black. There are two black suits, Spades and Clubs, and each has 13 cards. So there are total 26 black cards. Of these 26 cards, there are 12 face cards (King, Queen, and Jack) which are not black, leaving 14 black cards which are face cards. Therefore, the fraction of black and face cards is 14/52 or 7/26.

Learn more about fraction here:

https://brainly.com/question/8482939

#SPJ4

Answer:

plot the point at 1

Step-by-step explanation:

Absolutely, Jada's response is right. A square is a quadrilateral with four equal-length sides. A quadrilateral is a square if all four sides measure 5 cm.

Unfortunately, there is no alternative form Jada could have drawn that meets the requirement of all four sides measuring 5 cm. Every other quadrilateral with four equal-length sides is likewise a square. If Jada had drawn a quadrilateral with one or more sides of varying lengths, the specified criterion would not have been met. As a result, the only design Jada could have sketched that meets the requirement of having all four sides measure 5 cm is a square. It is worthwhile to investigate the properties of quadrilaterals and how they connect to the conditions presented in the problem. A quadrilateral is a four-sided polygon. Quadrilaterals come in a variety of shapes, including squares, rectangles, parallelograms, trapezoids, and kites. Certain quadrilaterals have unique qualities, such as opposing sides that are parallel or all angles that are right angles. The criterion in the provided problem is that all four sides of the quadrilateral measure 5 cm.

learn more about quadrilateral  here:

https://brainly.com/question/29934440

#SPJ4

Step-by-step explanation:

I do not believe you are given enough info to prove they are congruent....you only have ONE angle and one side that are equal ....you need another side or another angle to prove congruency....

I've added an illustration to show how the two triangles would not be congruent without changing the  info given in the pic

.

In some circumstances, it might also be essential to demonstrate congruence using various transformations.

In mathematics, transformations are modifications done to a geometric figure in a coordinate plane, such as a shape, point, or line. Applying various operations or functions on the coordinates of the points that make up the figure will result in these changes. Four fundamental types of transformations exist: Translation: A figure is moved horizontally, vertically, or both while maintaining its size, form, and orientation.

Translation, rotation, and reflection are the three fundamental transformations that can be employed to demonstrate the congruence of two figures.

To demonstrate that Figures 1 and 2 are congruent with one another, the following two transformational sequences could be used:

Figure 1 should be translated to overlap with Figure 2, then rotated.

b. Rotate Figure 1 about a point until it aligns with Figure 2's orientation.

c. Evaluate the two figures side by side to ensure that all related sides and angles match.

Rotation after reflection:

a. Create a mirror image of Figure 1 by reflecting it across a line.

b. Rotate the reflected Figure 1 about a certain point until it aligns with Figure 2's orientation.

c. Evaluate the two figures side by side to ensure that all related sides and angles match.

To ensure that the two figures are congruent, the transformations must be used in a precise order.

In some circumstances, it might also be essential to demonstrate congruence using various transformations.

To know more about transformation visit :-

brainly.com/question/11709244

#SPJ1

The equation of the given graph is: y = cosine (x + pi)

By convention, the cosine function like most other trigonometric functions has a period of 2π.

Since, the parental function is y = cos x, which has y-intercept at y = 1, and x-intercept at π/2.

From observation, the function showed in the graph attached has y-intercept at y = -1 and x-intercept at π/2.

This can be interpreted to mean that the function has been translated leftwards π units.

Ultimately, the function that belongs to this graph is; y = cosine (x + pi)

Read more on cosine graphs:

https://brainly.com/question/17075439

Answer: D. y = cosine (x + pi)

Step-by-step explanation:

Answer:

£602.84 in New York

Step-by-step explanation:

London Cost:

Converting pound to dollars:

£800 * 1.41 = $1128

Paris cost:

Converting euro to pounds:

€880/1.16 = £759

Converting pound to dollars again:

£759 * 1.41 = $1070

New york cost:

$850

The lowest price is in new york which is:

$850/1.41 = £602.84

Feel free to mark this as brainliest (I'm one brainliest off 50 so please help out