Can anyone solve the little chart at the bottom?

Answer:

[tex]M_2=2.15M[/tex]

Explanation:

Hello!

In this case, since the dilution processes are characterized by the addition of extra solvent, in this case water, to an initial solution in order to decrease the concentration of the solute, in this case sugar; as water is added, the moles of sugar remain unchanged, so the following equation can be written:

[tex]n_1=n_2\\\\M_1V_1=M_2V_2[/tex]

Whereas 1 accounts for the initial 250.0 mL of 4.00 M sugar and 2 for the concentration at the new volume which is:

[tex]V_2=250.0mL+216.1mL=466.1mL[/tex]

Thus, the final concentration is:

[tex]M_2=\frac{M_1V_1}{V_2} =\frac{250.0mL*4.00M}{466.1mL} \\\\M_2=2.15M[/tex]

Best regards!

Using magnesium ribbon instead of powdered magnesium decrease the rate of reaction between magnesium and air.

Rate of reaction tells about the duration of the completion of the reaction.

Rate of any reaction is directly proportional to the concentration and surface area of the reactant, temperature, catalyst, no. of collision, activation energy, etc.

So, if we magnesium in the ribbon instead of powdered magnesium the surface area of the reactant side decreases which results in the decrease of the rate of reaction.

Hence, option (D) is correct i.e. rate of reaction decreases on using magnesium ribbon instead of powdered magnesium.

To know more about rate of reaction, visit the below link:

https://brainly.com/question/1898560

Answer:

237.8L of water would need to be added.

Explanation:

The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).

Then figure out what information you have and what is being found. In this case:

M1 = 54.7 M

V1 = 1092 mL = 1.092 L

M2 = 0.25 M

V2 = unknown

Then solve the equation for whatever you are trying to find.

M1V1=M2V2

V2=M1V1/M2

Now you need to plug everything in.

V2=(54.7M*1.091L)/0.25M

V2=238.93L

That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.

238.93L - 1.091L = 237.8L

Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.

I hope this helps.  Let me know if anything is unclear.

Answer: Both of these are of great concern to human health. BPA is used in many things including plastic bottles and food packaging materials. Over time the polymer chains of BPA break down, and can enter the human body in many ways from drinking contaminated water to eating a fish that is exposed to the broken down toxins.

Explanation:

I think you will get it

Answer: No because a solution is a homogeneous MIXTURE of two or more substances. Water is a pure substance. It is made of hydrogen and oxygen, but shares none of their properties. So it’s pure.

Explanation:

Answer:

V₂ = 90.42 L

Explanation:

Given data:

Initial volume = 21.4 L

Initial pressure = 681 mmHg (681/760=0.89 atm)

Initial temperature = 42.3 °C (42.3 +273 = 315.3 K)

Final temperature = 221°C (221+273 = 494 K)

Final volume = ?

Final pressure = 248 mmHg(248/760 =0.33 atm)

Formula:

P₁V₁/T₁ = P₂V₂/T₂  

P₁ = Initial pressure

V₁ = Initial volume

T₁ = Initial temperature

P₂ = Final pressure

V₂ = Final volume

T₂ = Final temperature

Solution:

P₁V₁/T₁ = P₂V₂/T₂  

V₂ = P₁V₁T₂/T₁P₂

V₂ = 0.89 atm × 21.4 L × 494 K / 315.3 K × 0.33 atm

V₂ = 9408.72 L /104.05

V₂ = 90.42 L

Answer:

a. Kw = 1.0 × 10⁻¹⁴

Explanation:

a. Let's consider the self-ionization of water.

2 H₂O(l) ⇄ H₃O⁺(aq) + OH⁻

The ion-product of water (Kw) at 25 °C is:

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴

c. Considering [H⁺] = [H₃O⁺] = 4.0 × 10⁻⁹ M, the concentration of OH⁻ is:

[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 2.5 × 10⁻⁶ M

b. We can calculate the pOH using the following expression.

pOH = -log [OH⁻] = -log 2.5 × 10⁻⁶ = 5.6

d. We can calculate the pH using the following expression.

pH = -log [H⁺] = -log 4.0 × 10⁻⁹ = 8.4

When [H+] = 4.0 × 10–9 M in water at 25°C, then the [tex]Kw =1.0\times 10^-^1^4.[/tex]

Kw is the dissociation constant or ionization constant of water.

The self-ionization of water will be

[tex]\rm 2 H_2O(l) = H_3O^+(aq) + OH^-[/tex]

The dissociation constant of the water at 25°C will be

[tex]\rm Kw = [H_3O^+][OH^-] = 1.0 \times 10^-^1^4[/tex]

Thus, the correct option is a. [tex]Kw =1.0\times 10^-^1^4.[/tex]

Learn more about dissociation constant

https://brainly.com/question/3657057

Answer:

solid ; liquid and gas........

Answer:

The given substance is cast iron.

Explanation:

Given data:

Mass of substance = 50 g

Heat absorbed = 23000 J

Initial temperature = 250°C

Final temperature = 1250°C

Which metal is this = ?

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = 1250°C -  250°C

ΔT = 1000°C

23000 j = 50 g ×c ×1000 °C

23000 J = 50,000 g. °C×c

c = 23000 J /50,000 g. °C

c = 0.46 J/g.°C

The given substance is cast iron.

Answer:

An electrical phenomenon is caused by flow of free electrons from one atom to another. The characteristics of current electricity are opposite to those of static electricity. Wires are made up of conductors such as copper or aluminum.

Explanation:

from google

Answer:

Explanation:

intristing

Answer:

not sure if this us right but oxygen and fluorine? I learned chem but I forgot about it kinda sorry

Answer:

Aluminum even after being an active metal is used as a structural metal due to its toughness, high strength, lightweight, and resistance to the process of corrosion. It is resistant to corrosion as its reactivity gets suppressed due to the formation of an aluminum oxide film which is protective in nature, on its surface. Passivation is the term for the formation of the protective coating.

Answer:

sounds wave

Explanation:

From alarm, microwave, laser, TV, water waves and a musical instrument, everything release sounds.

(Not the same)

If it convinced you please add this in the brainlist

Answer:

Explanation:it is c

Answer:

C The amount of empty space between the water particles will decrease

Explanation:

I just took the quiz, have a nice day!

Answer:

[tex]\Delta S=900\frac{J}{K}[/tex]

Explanation:

Hello!

In this case, since the information is not missing, the following one will be used as it is found on similar problems:

[tex]\Delta h=26.7kJ/mol\\T_b=34.6\°C\\m=769.0g[/tex]

In such a way, we use the following equation to compute the entropy:

[tex]\Delta S=\frac{n\Delta h}{T_b}[/tex]

Whereas n (moles) are computed by using its molar mass (74.14 g/mol) as follows:

[tex]n=769.0g*\frac{1mol}{74.14g}=10.4mol[/tex]

[tex]\Delta S=\frac{10.4mol*26.7\frac{kJ}{ml} }{(34.6+273.15)K}\\\\\Delta S=0.900 \frac{kJ}{K} \\\\\Delta S=900\frac{J}{K}[/tex]

Best regards!

Answer:

C.Barometer

Explanation:

Answer:

Mass = 2.16 g

Explanation:

Given data:

Number of molecules of F₂ = 3.45 × 10²²

Mass in gram = ?

Solution:

Avogadro number:

The given problem will solve by using Avogadro number.

It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.

The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³ molecules

3.45 × 10²² molecules ×1 mol / 6.022 × 10²³ molecules

0.57× 10⁻¹  mol

0.057 mol

Mass in gram :

Mass = number of moles × molar mass

Mass = 0.057 mol × 37.9 g/mol

Mass = 2.16 g

Answer:

648.7g of Mg must be added

Explanation:

Based on the reaction:

3Mg + 1/2P4 → Mg3P2

3 moles of Mg produce 1 mole of Mg3P2

To solve this problem we neeed to find the moles of Mg3P2 in 1200g. With these moles and the chemical reaction we can finf moles of Mg and its mass:

Moles Mg3P2 -Molar mass: 134.88g/mol-:

1200.0g Mg3P2 * (1mol / 134.88g) = 8.897 moles of Mg3P2

Moles Mg:

8.897 moles of Mg3P2 * (3mol Mg / 1mol Mg3P2) = 26.69 moles of Mg

Mass Mg -Molar mass: 24.305g/mol-:

26.69 moles of Mg * (24.305g / 1mol) =

Answer:

¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β

Explanation:

To know which equation is unbalanced, we shall compare the mass number and atomic number of the reactant and product together. This is illustrated below:

¹²¹₅₀Sn —> ⁰₋₁β + ¹²¹₅₁Sb

121 = 0 + 121

121 = 121

50 = –1 + 51

50 = 51

Thus the above equation is balanced

¹⁹⁰₇₈Pt —> ¹⁸⁶₇₆Os + ⁴₂α

190 = 186 + 4

190 = 190

78 = 76 + 2

78 = 78

Thus, the above equation is balanced

¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β

10 = 10 + 0

10 = 10

4 = 3 + (–1)

4 = 3 – 1

4 = 2

Thus, the above equation is unbalanced.

²³⁸₉₂U —> ⁴₂α + ²³⁴₉₀Th

238 = 4 + 234

238 = 238

92 = 2 + 90

92 = 92

Thus, the above equation is balanced.

From the illustrations made above, only ¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β

Is unbalanced.

Answer:Cellular respiration is not the same as breathing, but they are closely related

Explanation: When you breathe in, you take in the oxygen your cells need for cellular respiration. When you breathe out, you get rid of carbon dioxide that your cells produce during cellular respiration.

Answer:

i THINK so

Explanation:

im not sure tho sorry if wrong

Answer:

2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)

Explanation:

Let's consider the molecular equation that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed.

2 Li₃PO₄(aq) + 3 Mg(NO₃)₂(aq) ⇒ 6 LiNO₃(aq) + Mg₃(PO₄)₂(s)

The complete ionic equation includes all the ions and insoluble species.

6 Li⁺(aq) + 2 PO₄³⁻(aq) + 3 Mg²⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 Li⁺(aq) + 6 NO₃⁻(aq) + Mg₃(PO₄)₂(s)

The net ionic equation includes only the ions that participate in the reaction and insoluble species.

2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)

Answer:

4.04433566 L (433566 repeating)

Explanation:

2.52 is divided by 28.6 is 0.0881118 (881118 repeating). multiply 0.0881118 (881118 repeating) by 45.9 to get 4.04433566 L (433566 repeating).

Noble Gases, at least that's what I was told. Hope that helps.

Answer:

Meh i want to play

UwU

:)

Answer: yeah sure lad

Explanation:

Answer: FeO

Explanation:

Answer:

This is not worth 50 points liar

Explanation: