I WILL MARK YOU THE BRANLIEST!!!
Which property shows that electrons are quantized?
A. Electrons are attached to protons.
B. Each electron has its own "address."
C. Each electron carries a charge.
D. Electrons have very little mass.
Answer:
B. Each electron has its own "address."
Explanation:
This is the correct answer.
Good luck with the rest, and have a good day : )
Each electron has its own "address." Therefore, the correct option is option B among all the given options.
What is quantization?The elementary electric charge of the electron is a negative one, making it a subatomic particle. Due to their lack of components or substructure, electrons, which are part of the lepton particles family's first generation, are typically regarded to be elementary particles. The mass of an electron is roughly 1/1836 that of a proton.
The electron has a half-integer intrinsic rotational momentum that is represented in terms of the decreased Planck constant,, among its quantum mechanical features. The rule of exclusion developed by Pauli states that because electrons are fermions, no two of them may be in the same quantum state. Since they're capable of collide against other particles as well as can be bent like light, electrons, like all primary particles, display both wave and particle characteristics. Each electron has its own "address."
Therefore, the correct option is option B.
To know more about quantization, here:
https://brainly.com/question/24256516
#SPJ2
Electronic configuration PLZZZ GUYSS(sub shell distribution) for L shell will be .........................
Answer:
Shells
The maximum number of electrons that can be accommodated in a shell is based on the principal quantum number (n). It is represented by the formula 2n2, where ‘n’ is the shell number. The shells, values of n, and the total number of electrons that can be accommodated are tabulated below.
Shell and ‘n’ value Max. Electrons in the Electron Configuration
K shell, n=1 2*12 = 2
L shell, n=2 2*22 = 8
M shell, n=3 2*32 = 18
N shell, n=4 2*42 = 32
L shell: n =2
hence,
2n²
= 2(2)²
i.e. 8 electrons can fit in the l shell
hence max no. of electrons is 8
so configuration in L shell is,
2, 8...
Watts are a measurement of power
Answer:
Watts are a measurement of power, describing the rate at which electricity is being used at a specific moment. For example, a 15-watt LED light bulb draws 15 watts of electricity at any moment when turned on. Watt-hours are a measurement of energy, describing the total amount of electricity used over time.
Please mark as brainliest.
Answer: True
Watts are a measurement of power, used in light bulbs and other electricity. It is also measured as candela (C) in SI Units. The answer to the question is true because of this measurement.
Hope this helps!
how are compounds with metallic bonds similar to ionic compounds?
Answer:
Metals do not form double and triple bonds in general because metals want to lose electrons, not share, in order to become stable, and both compounds have high melting ppints
Compounds with metallic bonds and ionic compounds are similar in their melting point and boiling point, conductivity, solubility in polar solvents etc.
Ionic compounds are chemical compounds that are formed by the electrostatic attraction between oppositely charged ions.
Compounds with metallic bonds and ionic compounds are similar in several ways. Some of the similarities are:
1. High melting and boiling points: Both metallic and ionic compounds have high melting and boiling points due to the strong forces that hold the atoms or ions together.
2. Conductivity: Both metallic and ionic compounds are good conductors of electricity due to the presence of charged particles that can move freely.
3. Brittle: Ionic and metallic compounds are generally brittle in nature, meaning that they are prone to breaking or shattering when subjected to stress.
4. Solubility in polar solvents: Both metallic and ionic compounds are generally soluble in polar solvents such as water, due to the polar nature of the molecules.
In conclusion, compounds with metallic bonds and ionic compounds share several similarities. Both have high melting and boiling points, are good conductors of electricity, are brittle, and are generally soluble in polar solvents.
Learn more about ionic compounds here:
https://brainly.com/question/9167977
#SPJ6
Briefly explain why the bulk temperature of the water remains low (at room temperature)
“An icy wind teetered trash cans and turned my cheeks to marble.”
What does the imagery in this sentence tell the reader about the weather?
in seedfolks
A flashbulb of volume 1.70 mL contains O2(g) at a pressure of 2.30 atm and a temperature of 18.0°C. How many grams of O2(g)
the flashbulb contain
Answer:
0.0001637 mol
Explanation:
PV = nRT
Very important formula in chem
2.3 atm * 0.0017 L = n * 0.082057 * 291 K
= 0.0001637 mol O2
This concept is very important in chem, practice it.
Describe what will eventually happen to the water level in the beaker.
Explain your reasoning.
Answer:
The water level in the beaker will eventually go down because some of the liquid water changes into ice (a solid) and the particles get closer together in the beaker. The water level in the beaker will eventually stay the same because some of the liquid water changes into water vapor (a gas) and leaves the beaker.
Which statement describes all chemical changes, but not all physical changes?
Answer:
A new substance forms.
Explanation:
Answer:
B
Explanation:
Consider the following statements about first ionization energies:
I. Because the effective nuclear charge for Mg is greater than that for Be, the first ionization energy of Mg is greater than that of Be.
II. The first ionization energy of O is less than that of N because in O we must pair electrons in the 2p orbitals.
III. The first ionization energy of Ar is less than that of Ne because a 3p electron in Ar is farther from the nucleus than a 2p electron in Ne.
Which of the statements I, II, and III is or are true?
Answer:
I,II, III
Explanation:
Firstly, the magnitude of nuclear charge affects the first ionization energy of an element. Hence,as effective nuclear charge increases, the attraction between the nucleus and the outermost electron increases and ionization energy consequently increases. Thus Mg has a higher first ionization energy than Be.
Secondly, oxygen has an electron configuration of 1s2 2s2 2p4 while nitrogen has an electron configuration of 1s2 2s2 2p3. Now, recall that extra energy is often associated with half filled orbitals hence nitrogen has a higher first ionization energy than oxygen. Furthermore, the addition of electron to an already half filled 2p orbital in oxygen (pairing) leads to inter electronic repulsion and drastic fall in first ionization energy. Therefore, as we move from nitrogen to oxygen in the periodic table, greater inter-electron repulsion between two electrons in the same p-orbital counter balances the increase in effective nuclear charge hence nitrogen has a greater first ionization energy than oxygen.
Lastly, the 3p orbital is far away from the nucleus hence we expect it to feel less of nuclear attraction than a 2p orbital. Hence the first ionization energy of Ar is less than that of Ne.
Why is H2S called an analytical agent?
Answer:
Hydrogen sulfide is an newly recognized signical molecule with very potent cytoprotective actions.
the kinetic molecules theory helps explain relastionships between
Answer:
hi :D
Explanation:
State the relationship between temperature and kinetic energy. The Kinetic Molecular Theory allows us to explain the existence of the three phases of matter: solid, liquid, and gas. In addition, it helps explain the physical characteristics of each phase and how phases change from one to another.
hope this helps
._.
...
What is the same on the left and right side of a balanced equation? Explain your answer.
Answer:
Number of atoms of elements are same on left and right side of balance equation.
Explanation:
Every chemical reaction must follow the law of conservation of mass. According to which mass can neither be created nor destroy but it change from one to another form. It means mass remain conserved. That is why we need to balance the chemical equation because mass remain same on both side of equation. Consider the example,
Chemical equation:
N₂ + H₂ → NH₃
We can see that nitrogen and hydrogen react with each other and from ammonia. We need to balance the equation to have equal amount on both side.
Balance chemical equation:
N₂ + 3H₂ → 2NH₃
It means mass remain same but change from one to another form.
A balanced equation is one that is having a chemical reaction where the numbers of atoms. Here the number of elements in each reaction and the total charges are the same. This includes both the reactant and the product.
However, the mass and charge are balanced on both sides of the reaction. Hence the left and the right side is always equal to the number of atoms. Thus the chemical reaction is a balance of atoms involved in the reaction.Learn more about the same on the left and right sides of a balanced equation.
brainly.ph/question/20750343.
Which statement best describes how to predict the formula of a stable ionic compound? Use the same number of cations as anions so that the compound is neutral. Use more cations than anions so that the compound is positively charged. Use enough cations and anions so that the total charge is zero. Use fewer cations than anions so that the compound is negatively charged.
IT's C
Answer:
Option C: Use enough cations and anions so that the total charge is zero
Explanation:
In a stable ionic compound, to get a predict the formula, the positive and negative ions on one side need to cancel out so that the compound becomes neutral.
For example, let's take consider an ionic compound known as Potassium Chloride. It has a formula KCl. Now , breaking it down, the charges will be; K+ and Cl-. This means Potassium (K) has +1 charges and Chloride has -1 charges. Thus, they will cancel out to give a total neutral charge of 0.
Thus, the correct answer is to use enough a ions and cations so that the total charge is zero.
Answer:
C
Explanation:
edge 2020 unit rev
The chemical formula for calcium chloride is
Answer: anhydrous CaCl 2 :0H 2 O
monohydrate CaCl 2 :1H 2 O
a di-hydrate CaCl 2 :2H 2 O
Explanation:
A student conducting a calorimetry investigation determines a negative ∆H. What does the negative value indicate about the reaction?
A. The reaction synthesized a single product.
B. The reaction was exothermic.
C. The reaction absorbed energy.
D. The reaction involved decomposition.
Answer:
a
Explanation:
correct
Which statement describes an intensive property of matter?
Answer:
hope it helped you.
Explanation:
The properties of matter that do not depend on the size or quantity of matter in any way are referred to as an intensive property of matter. Temperatures, density, color, melting and boiling point, etc., all are intensive property as they will not change with a change in size or quantity of matter.
If heat is required for a chemical reaction to occur, from where does the energy come?
Answer:
Chemical energy is energy stored in the bonds of chemical compounds, like atoms and molecules. This energy is released when a chemical reaction takes place. Usually, once chemical energy has been released from a substance, that substance is transformed into a completely new substance.
Explanation:
The diagram illustrates photosynthesis. Which best describes what is happening in the area marked X?
Answer:
You forgot to include the diagram use snipping tool to take a picture and upload it
Explanation:
based on the half-life of Tc-99, how many half-lives have to pass for a 150 mg sample of Tc-99 to decay down to 30mg?
Answer:
2.322 half-lives have passed to decay down from 150 miligrams to 30 miligrams.
Explanation:
The half of Technetium-99 is approximately 211000 years. The decay of isotopes is represented by the following ordinary differential equation:
[tex]\frac{dm}{dt} = -\frac{m}{\tau}[/tex] (Eq. 1)
Where:
[tex]\frac{dm}{dt}[/tex] - First derivative of isotope mass in time, measured in miligrams per year.
[tex]m[/tex] - Mass of the isotope, measured in miligrams.
[tex]\tau[/tex] - Time constant, measured in years.
Now we proceed to obtain the solution of this differential equation:
[tex]\frac{dm}{m} = -\frac{dt}{\tau}[/tex]
[tex]\int {\frac{dm}{m} } = -\frac{1}{\tau}\int dt[/tex]
[tex]\ln m = -\frac{t}{\tau}+C[/tex]
[tex]m(t) = m_{o}\cdot e^{-\frac{t}{\tau} }[/tex] (Eq. 2)
Where:
[tex]m_{o}[/tex] - Initial mass of the isotope, measured in miligrams.
[tex]t[/tex] - Time, measured in years.
The time passed for isotope is cleared within the equation described above:
[tex]\ln \frac{m}{m_{o}} = -\frac{t}{\tau}[/tex]
[tex]t = -\tau \cdot \ln \frac{m}{m_{o}}[/tex]
In addition, we can obtain the time constant as a function of half-life:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex] (Eq. 3)
If we know that [tex]t_{1/2} = 211000\,yr[/tex], [tex]m_{o} = 150\,mg[/tex] and [tex]m = 30\,mg[/tex], then the time passed is:
[tex]\tau = \frac{211000\,yr}{\ln 2}[/tex]
[tex]\tau \approx 304408.654\,yr[/tex]
[tex]t = -(304408.654\,yr)\cdot \ln \left(\frac{30\,mg}{150\,mg} \right)[/tex]
[tex]t \approx 489926.829\,yr[/tex]
The amount of passed half-lives is that time divided by a half-life. That is:
[tex]n = \frac{489926.829\,yr}{211000\,yr}[/tex]
[tex]n = 2.322[/tex]
2.322 half-lives have passed to decay down from 150 miligrams to 30 miligrams.
A scientist plants two rows of corn for experimentation. She puts fertilizer on row 1 but does not put fertilizer on row 2. Both rows receive the same amount of sun and water. She checks the growth of the corn over the course of five months.
Q9) What is the independent variable in this experiment? Why is this variable independent?
Q10) What is the dependent variable in this experiment? Why is this a dependent variable?
Q11) What variables are controlled in this experiment? Why are/is these/this variable control variable(s)?
Answer:
Q9. The independent variable in this experiment is the fertilizer. It is independent because she manipulating the variable to compare the growth.
Q10. The dependent variable in this experiment is the amount of growth of the corn. It is this because the growth depends on what the scientist did on the corn.
Q11. The variable controlled in this experiment is the amount of sun and water. These two variables never change so this is why it is the control.
Explanation:
Answer:
Explanation:
independent - 5 months dependent - sun controlled - water and the fertilizer
Is the moons rate rotation that same as earths
Answer:
no
Explanation:
Answer:no
Explanation:The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis.
Consider the reaction when aqueous solutions of calcium nitrate and potassium carbonate are combined. The net ionic equation for this reaction is:
Answer:
Ca2+(aq) + 2OH-(aq) → Ca(OH) 2 ( s )
Explanation:
The balanced equation is given as;
Ca(NO 3 ) 2 ( aq ) + 2KOH(aq) → Ca(OH) 2 ( s ) + 2KNO 3 ( aq )
The net ionic equation features only ions that actually participated in the reaction. These ions are identified due to their change in oxidation numbers. Also, the aqueous compounds are broken down into ions.
Ca2+ + 2NO3- + 2K+ + 2OH- → Ca(OH) 2 ( s ) + 2K+ + 2NO3-
Ions present in both sides of the equation above. These are; NO3-, K+ and OH-
The net ionic equation is;
Ca2+(aq) + 2OH-(aq) → Ca(OH) 2 ( s )
Which statement accurately describes the atoms of a specific element? *
An indium, In, atom contains 115 protons inside the nucleus and 49 neutrons outside the nucleus.
A scandium, Sc, atom contains 45 electrons outside the nucleus and 21 neutrons inside the nucleus.
An aluminum, Al, contains 27 electrons and 27 protons inside the nucleus.
A zinc, Zn, atom contains 30 protons inside the nucleus and 30 electrons outside the nucleus
Answer:
the last one, (A zinc, Zn, atom contains 30 protons inside the nucleus and 30 electrons outside the nucleus)
A zinc, Zn, atom contains 30 protons inside the nucleus and 30 electrons outside the nucleus accurately describes the atoms of a specific element ,therefore option (d) is correct.
What are the characteristics of zinc element ?Zinc is placed in group 12 of the periodic table. It is in the first period of transition or d block elements, and fourth period of the periodic table.
Zinc is a metal. It has two valence electrons that are lost easily. Zinc forms positive ions with 2+ charges, like the metals of the alkaline earth family.
Uses of zinc element -:
Zinc is an important trace element for human beings. Zinc is used for making brass, an alloy of copper and zinc.Zinc is used as the anode in dry cells.A zinc, Zn, atom contains 30 protons inside the nucleus and 30 electrons outside the nucleus accurately describes the atoms of a specific element ,hence option (d) is correct.
Learn more about zinc element ,here:
https://brainly.com/question/7242563
#SPJ6
How many protons and electrons does a hydrogen atom have?
A hydrogen atom contains 1 electron, 1 proton
Explanation:
Which phrase describes neap tides?
A.) occur four times a day
B.) produce extra-low tidal ranges
C.) caused only by the pull of the moon
D.) occur at the same time as spring tides
NEED YOUR HELP.
Answer:
The answer is B
Explanation:
Neap tides are a type of to tie occuring after spring tides. It occurs when moon and sun are at the right angles to each other. It produce low tidal ranges. Hence, phrase B is correct.
What are tides ?Tides are a geographical phenomenon taking place due to the gravitational pull by sun and moon on the ocean of earth. They are long period waves causing the ocean back and forth to the cost.
During new moons larger tides appears in earth and they are called spring tides. Spring tides occurs twice in a lunar month. During spring tides, moon appears full and earth is between sun and moon.
After seven days of spring tide, lower tides are produced when the moo and sun comes in right angle to each other. They are called the neap tides producing lower range of tidal waves . During this time moon will be half full thus for the first and last quarter of the moon. Hence, the option B neap tide produce low tidal ranges is correct.
To know more on tides, refer here:
https://brainly.com/question/9493666
#SPJ6
Releases sugar (glucose) into the blood stream to power cells A. Brain B. Heart C. Liver D. Stomach and intestines
Answer:
C Liver
Explanation:
50 POINTS
Assume that the variables x and y are inversely related. If k = 18, what is the value of y for each of the following points?
Be sure and record your data to be used in the following problem.
х y k
1 18
A: 18,0.05,9
2 18
A: 0.11,36,9
3 18
A: 0.16,6,54
6 18
A: 0.33,108,3
9 18
A: 162,0.5,2
18 18
A: 324,0.75,1
Answer:
9/.05=180. I think it's 1
Explanation:
If x and y are inversely proportional then the product of xy =k or y=k/x
As we will soon see in Section 4.5, gasoline is a complex mixture of alkanes and other hydrocarbons, and the term "octane rating" is used as a standard measure of the performance of engine fuel. In the petroleum industry, one area of interest is the use of catalysts to convert unbranched alkanes and branched alkanes with higher octane ratings (Journal of the Japan Petroleum Institute 2004, 47, 1–10). For example, heptane can undergo isomerization in the presence of suitable catalysts to give eight different constitutional isomers, all of which are branched alkanes with the molecular formula C7H16. Draw all eight constitutional isomers, making sure not to draw the same compound twice.
Answer:
Explanation:
C₇H₁₆ is heptane and it has nine isomers (n-heptane and the remaining 8 constitutional isomers). Constitutional isomers are compounds with the same molecular formula but different structural formula or atom connectivity.
The constitutional isomers of n-pentane are 2-methylhexane, 3-methylhexane, 2,2-dimethylpentane, 2,3-dimethylpentane, 2,4-dimethylpentane, 3,3-dimethylpentane, 3-ethylpentane and 2,2,3-trimethylbutane. There structures are in the picture attached
A non polar covalent bond (pure covalent) would form in which of the following pairs of atoms?
A.) H-Cl
B.) Se-Br
C.) Na-Cl
D.) Br-Br