calculate your power in watts if you do 500 N*m of work picking up a dumbbell,and takes 5 s to perform that task?​

Answers

Answer 1

Answer:

100watts

Explanation:

Given parameters:

Workdone  = 500Nm

Time taken = 5s

Unknown:

Power in watts = ?

Solution:

Power is the rate at which work is done;

   Power  =[tex]\frac{workdone }{time}[/tex]

Input the parameters and solve;

   Power = [tex]\frac{500}{5}[/tex]  = 100watts


Related Questions

A moving car skids to a stop with the wheels locked across a level roadway. Of the forces listed, identify which act on the car.
Normal
Gravity
Applied
Friction
Tension
Air resistance

Answers

Answer:

Normal, Gravity, Friction, and Air Resistance.

Explanation:

When a moving car skid to stop and its wheels are locked across, then the following forces will be applied on the car:

Normal force: It will act counter to gravity that pushes an object against a surface and acts perpendicular to the contact surface.

Gravity: Gravity force acts in each and every object having mass and it can not be avoidable. So, the gravity force will also apply to the car and attract it to the earth's surface.

Friction: Friction is a force that acts opposite to the motion and stops or slows motion. Friction will be applied to the car that will oppose the motion of the car and stop it.

Air resistance: air resistance is defined as the forces exerted by air that acts opposite to the relative motion of an object. Air resistance will also be applied to the car when it will skid to stop as we are always surrounded by the air.

Hence, the correct answers are "Normal, Gravity, Friction, and Air Resistance."

matter makes up all ? and ?

Answers

and All lives matter

the solubility of sugar is 30 degree Celsius at 220 what does it mean​

Answers

Answer:

So, that if you put 100 mL of 30 degree water in a beaker, you could add up to 220 grams of sugar and it would eventually dissolve. In other words, that mass of sugar should dissolve in 100 mL of water to make a solution that is just saturated.

The solubility of sugar is 30° C at 220. This means 220g of sugar is dissolved in 100g of solvent to make the saturated solution at 30° C. Solutions.

What is the solution?

Most frequently, the solubility is represented in terms of mass per volume of water. Solubilities are frequently stated as g/100 mL, g/100 g, or g/L of water.

The ratio you provided is probably 1 g of sugar to 100 mL of water. In other words, if you put 100 mL of water at 30 degrees in a beaker, you could add up to 220 grams of sugar, and it would finally dissolve.

To generate a solution that is just saturated, the mass of sugar should dissolve in 100 mL of water.

Therefore, at 220 degrees, sugar dissolves at 30 degrees. This indicates that to create the saturated solution at 30° C, 220g of sugar must be dissolved in 100g of solvent.

To learn more about the solution, refer to the link:

https://brainly.com/question/23901809

#SPJ6

7. Your teacher has mixed salt, pepper, and water. Describe a procedure that you could use to separate this mixture. Be sure to list all of the materials you would need, your set up, and your expected results.​

Answers

Answer:

hope this could help you

2
How is acceleration related to force when mass is constant, according to Newton's second law of motion?
A. The acceleration is directly proportional to the net force,
OB
The acceleration is inversely proportional to the net force.
C. The acceleration is inversely proportional to the square root of the net force.
OD
The acceleration is directly proportional to the square root of the net force.
Reset
Next Question

Answers

Answer:

A

Explanation:

The acceleration of an object is directly proportional to its net force.

[tex]a = \frac{f}{m} [/tex]

Answer:

Correct choice: A. The acceleration is directly proportional to the net force

Explanation:

Newton's Second Law of Motion

According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force F and inversely proportional to the object's mass m:

[tex]\displaystyle a=\frac{F}{m}[/tex]

Correct choice: A. The acceleration is directly proportional to the net force

Give reasons.
a. A stretched catapult has potential energy.
b A stone on ground has zero energy.
C. Rolling a drum is work against friction.
d. Lifting a stone is work against gravity.
e. Work and energy both have same unit.​

Answers

a. A stretched catapult can do work when released so it must have potential energy.

b. A stone on the ground will not move on its own ever again so it has zero energy.

c. In order to roll an object there must be a friction force between the object and the ground (otherwise it will slide)

d. To lift a stone you must overcome the weight which is the force due to gravity.

e. Work and energy are both measured in Joules.

Which event is an example of condensation?
A. Wet clothes are drying on a clothesline.
B. A mirror fogs up when someone takes a hot shower.
C. Water drips from an icicle on the edge of a roof.
O D. Rain turns to sleet as it nears the ground.

Answers

Answer:

the answer to your question is b a mirror fogs up when someone takes a hot shower.

The process of conversion of gaseous water to its liquid form is called condensation. The fogs formed on the mirror from the hot shower is an example of condensation.

What is condensation?

Condensation is the process of cooling up of water vapor to liquid water. Water vapor condenses when it cools. Condensation can be best understood from the reason behind raining.

When water vaporizers from resources and cools from the sky, and the vapor condenses to form liquid droplets. Similarly we can observe water droplets in the window pane due to the similar effect.

The water vapor arises from the hot shower condenses in the atmosphere and forms the drops on the mirror. Therefore, the mirror fogs up by the hot shower is an example of condensation.

To find more on condensation, refer here:

https://brainly.com/question/15563071

#SPJ5

Determine the weight of a 10.0-kg person who is running with a speed of 5.0 m/s. Enter a
numerical answer.

Answers

Answer:

weight=mass*gravity

weight=10.0*10

so weight=100N

What is the name of the kind of stretch that involves stretching as far as you can and then holding for 10-30 seconds

Question 2 options:

PNF


ballistic


dynamic


static

Answers

Answer:

Static stretching.

Explanation:

It is static stretching because it is a form of stretching which u can do actively for a period of time and you hold position for about 30 to 60 seconds which allow the muscles and connective tissues to lengthen. It is done after work out with out movement in order to loosen up muscles so as to gain flexibility.

Calculate the TOTAL mechanical energy of pendulum is it swings from his highest point to its lowest point. Pendulum mass is 4 kg. Use your equations for gravitational potential energy and kinetic energy to determine these values based on the data given below. Total energy is the sum of gravitational potential energy and kinetic energy. In this problem, round gravity to: g = 10 m/s^2.

Answers

Answer:

its should be 2.0 and 4.5 on it

In economics, _________ is the amount of a resource that firms and producers are willing and able to provide to the marketplace

Answers

sectors are the amount of resources

Three toy boats with the same mass were in a lake. Two boats were moving and one was stopped. Each boat got bumped by another boat, but not in the same direction. All the boats changed speed as a result of being bumped. Use the information in the diagram to answer. Which toy boat exprienced the strongest force when it was bumped ? How do you know ?

Answers

The answer is " The orange and gray toy boats experienced the strongest force because both gained the same force as they sped up the blue boat lost force so it slow down

Explanation:

Trust me I did this one for an assignment

The boat that will experience the strongest force is the boat that has the highest speed.

According to Newton's second law of motion, the force applied to an object is directly proportional to the product of mass and acceleration of the object.

F = ma

[tex]F = \frac{mv}{t}[/tex]

where;

F is the force experienced by the objectv is the velocity of the objectt is the time of motion

The force experienced by the boats is directly proportional to the velocity of their motion. Since the boats have the same mass, the force experienced by each boat will depend on the speed with which the boat moves.

Thus, the boat that will experience the strongest force is the boat that has the highest speed.

Learn more here:https://brainly.com/question/11657305

4. Which of the following statements is correct?
A Mass and weight are different names for the same thing
B The mass of an object is different if the object is taken to the Moon
C The weight of a cer is one of the forces acting on the car.
D The weight of a chocolate beris measured in kilograms

Answers

Answer:

Explanation:

A: wrong. Mass and weight are different.

B: Wrong. The mass here and the mass on the moon are the same. The weight, which is Mass * the acceleration  is equal to weight.

C: Correct.

D: Wrong. Weight is not measured in Kg. Mass is.

Hiro walks up a flight of stairs in his apartment building. Later in the day, he runs up the same flight of stairs.

Which statement about work and power describes Hiro’s actions?

He did more work running than walking.
He did more work walking than running.
He had more power running than walking.
He had more power walking than running.

Answers

Answer:

C) he had more power running than walking

Explanation:

saw it on a quizlet. not 100% sure tho

Hiro walks up a flight of stairs in his apartment building. Later in the day, he runs up the same flight of stairs so He had more power running than walking.

What is power?

In physics, power is the amount of energy transferred or converted per unit of time. In the International System of Units, the unit of power is the watt, equal to one joule per second. In older works, power is sometimes called activity. Power is a scalar quantity.

Power is related to other quantities; for example, the power involved in moving a ground vehicle is the product of the traction force on the wheels and the velocity of the vehicle.

The output power of a motor is the product of the torque that the motor generates and the angular velocity of its output shaft

Since we know that Hiro will run on stairs to minimize the time of reaching his home so if time decreases then he has to increase his power as power is the ratio of work and time.

Hence Hiro walks up a flight of stairs in his apartment building. Later in the day, he runs up the same flight of stairs so He had more power running than walking.

To know more about power follow

https://brainly.com/question/24858512

Why should you never do an exercise such as the bench press without a spotter?​

Answers

Answer:

you could hurt yourself

Explanation:

Answer

You should never do an exercise such as the bench press without a spotter because you could hurt yourself or push your self too much.

Explanation:

1. Which of the following provides a correct answer for a problem that can be solved using the kinematic equations?
A A body starts from rest and accelerates at 8 m/s/s for 3 s. The body's final
position is 32 m.
B A body starts from rest and accelerates at 8 m/s/s for 3 s. The body's final
velocity is 16 m/s
C A body starts from rest and accelerates at 8 m/s/s for 3 s. The body's travels a
distance of 16 m
A body starts from rest and accelerates at 8 m/s/s for 3 s. The body's final
velocity is 24 m/s
E A body starts from rest and accelerates at 8 m/s/s for 3 s. The body's final
position is 30 m.
1 of 14
2
3
5 6 7 8
9

Answers

Answer:

12

Explanation:

12

A student is on a skateboard facing a wall. The student and skateboard have a mass of 75 kilograms. The student pushes off of the wall with a force of 100 Newtons. What is the force of the wall pushing back on the student? What is the acceleration of the student as she moves away from the wall?

Answers

Answer:

F=-100N; a=1.3m/s^2

Explanation:

Force is being made by student, so wall counteracts that force by not moving so it is equally opposite.

The force of the wall pushing back on the student would be 100 Newtons, and the acceleration of the student as she moves away from the wall would be 1.33 m/s²

What is Newton's third law of motion?

Newton's third law of motion state that for every action force there exists a complementary reaction force that balances it.

As given in the problem a student is on a skateboard facing a wall. The student and skateboard have a mass of 75 kilograms. The student pushes off of the wall with a force of 100 Newtons,

The force of the wall pushing back the student = 100 Newtons

The acceleration of the student = 100/75

                                                     =1.33 m/s²

Thus, The student would be pushed back against the wall by a force of 100 Newtons, and she would accelerate away from the wall at a rate of 1.33 m/s².

Learn more about Newton's third law of motion here, refer to the link;

brainly.com/question/974124

#SPJ2

1. According to Newton's third law of motion, how are action
and reaction forces related?
2. How is momentum conserved?
3. Suppose you and a friend, who has exactly twice your mass,
are on skates. You push away from your friend. How does the
force with which you push your friend compare to the force
with which your friend
pushes you? How do your
accelerations compare?
4. Thinking Critical be ly comparing and Contrasting
Which has more momentum, a 250-kg dolphin swimming
at 6 m/s, or a 450-kg manatee swimming at 2 m/s?
(need 1-4 answered ASAP)

Answers

Answer:

you couldn't do this on your own or search it up on google

A force of 500 N acts for a time interval of 0.001 second on an object of mass 0.20 kg that was initially at rest. Calculate the final velocity of the object after the force acts

Answers

Answer:

100

Explanation:

The final velocity of the object after the force acts is 2.5 meters per second.

To calculate the final velocity of the object after the force acts, we can use Newton's second law of motion, which states that:

Force = Mass × Acceleration

We need to find the acceleration of the object first. Since the object was initially at rest, its initial velocity (u) is 0 m/s.

The force acting on the object is 500 N, and the mass of the object is 0.20 kg. We can rearrange the equation to find the acceleration (a):

Acceleration (a) = Force / Mass

a = 500 N / 0.20 kg

a = 2500 m/s²

Now, we can use the kinematic equation to find the final velocity (v) of the object:

Final velocity (v) = Initial velocity (u) + (Acceleration × Time)

The initial velocity (u) is 0 m/s (since the object was initially at rest), and the time interval (t) is 0.001 second.

Final velocity (v) = 0 m/s + (2500 m/s² × 0.001 s)

v = 0 m/s + 2.5 m/s

v = 2.5 m/s

Hence, the final velocity of the object after the force acts is 2.5 meters per second.

To know more about final velocity here

https://brainly.com/question/28608160

#SPJ2

I would appreciate the help

Two classmates, Aisha and Brandon, want to attend two school activities
over the coming weekend. They have one parking pass between them. The
probabilities that the classmates will attend each event are shown in the
table.
Alsha
Brandon
0.65
0.94
Probability of attending
the Saturday activity
Probability of attending
the Sunday activity
0.80
0.43
They decide to let the person more likely to attend both events have the
parking pass. Assuming that attendance at one activity is independent of
attendance at the other, who is more likely to attend both activities?
A. Brandon. He has a 0.40 probability of attending both activities
O B. Brandon. He has a 0.69 probability of attending both activities
C. Aisha. She has a 0.52 probability of attending both activities.

Answers

Answer:

The answer is D.

Explanation:

A soccer player applies a force of 48.4 N to a soccer ball while kicking it. If the ball has
a mass of 0.44 kg, what is the acceleration of the soccer ball?
A. 27.3 m/s2
B. 21.3 m/s2
C. 110 m/s2
D. 104 m/s2

Answers

Answer:

C. 110 m/s2

Explanation:

Force = Mass x Acceleration

Since we have the force and the mass, we can rearrange this equation to solve for acceleration by dividing both sides by mass:

Force/Mass = (Mass x Acceleration)/Mass

Acceleration = Force/Mass

Now we just have to plug in our values and calculate!

Acceleration = 48.4/0.44

Acceleration = 110m/s/s

It is option C. 110 m/s2

Hope this helped!

Yea C is the answer the first answer is right

7. A car is moving at 50.0 mph when the driver applies brakes. Determine the distance it
covers before coming to a halt. Coefficient of static friction between the tires and surface of
the road is 0.514. Mass of the car is 1000 kg.

Answers

Answer:

The distance to come to a halt is approximately 49.53 meters

Explanation:

Thee given parameters are;

The speed of the car, v = 50 mph = 22.35 m/s

The mass of the car, m = 1000 kg

The coefficient of friction,  = 0.514

The force of friction of the brake = Mass × Gravity × Friction = 1000 × 9.81 × 0.514 = 5042.34 N

The initial kinetic energy of the car = 1/2×m×v² = 1/2 × 1000 × 22.35² = 249761.25 J

The work done by the brake = Force of the brake × Distance, d, to come to halt

By conservation of energy, we have;

The work done by the brake = The initial kinetic energy of the car

∴ The initial kinetic energy of the car = Force of the brake × Distance, d, to come to halt

The initial kinetic energy of the car = 249761.25 J = 5042.34 N × Distance, d, to come to halt

∴The distance to come to a halt = 249761.25 J /(5042.34 N) ≈ 49.53 meters

The distance to come to a halt ≈ 49.53 meters.

The car will cover 49.65 m distance before stopping due to application of brake.

Given data:

The mass of car is, M = 1000 kg.

The initial speed of car is, u = 50.0 mph = (50)(0.447 m/s) = 22.35 m/s.

The coefficient of static friction is, [tex]\mu = 0.514[/tex].

The given problem can be solved using the third kinematic equation of motion. Which is,

[tex]v^{2}=u^{2}+2as[/tex] ....................................................(1)

Here, v is the final speed, v = 0 (Because car is finally stopping)

s is the distance covered before stopping and a is the magnitude of acceleration.

Now, since frictional force opposes the motion. Then,

[tex]F = f\\\\ma = \mu \times m \times g\\\\a = 0.514 \times 9.8\\\\a =5.03 \;\rm m/s^{2}[/tex]

Substituting the values in equation (1) as,

[tex]0^{2}=23.35^{2}+2(-5.03)s\\\\s = \dfrac{2500}{2 \times 5.03}\\\\ s=49.65 \;\rm m[/tex]

Thus, the car will cover 49.65 m distance before stopping due to application of brake.

Learn more about the Kinematic equations of motion here:

https://brainly.com/question/14355103

Find the resultant of an easterly force of 100 N and a southeast force of 80 N acting at 65 degrees to the 100 N force

Answers

Answer:

Resultant is 152 N at 28.5 degrees south to the 100 N force

Explanation:

chemical formulawhat is the chemical formula ​

Answers

a set of chemical symbols showing the elements present in a compound and their relative proportions, and in some cases the structure of the compound.

That’s the definition

Answer: A chemical formula is a way of showing and representing information about a chemical proportion of atoms that constitute a particular chemical compound or molecule

Yodelin has fifty quarters and dimes. Their total value is $9.80. Which of these systems of equations can be used to find the number of quarters (q) and
dimes (d) Yodelin has?

Answers

Answer:

q + d = 50

25q + 10d = 980

Explanation:

The equation that can be employed to determine the number of quarters(q), as well as, dimes(d) that Yodelin has would be:

q + d = 50...(1)

25q + 10d = 980...(2)

Multiplying (1) by 25

25q + 25d = 1250 ...(3)

25q + 10d = 980...(4)

subtracting (4) from (3)

15d = 270

d = 18

q = 50 - 18

    = 32

The system of the equations could be

q + d = 50

25q + 10d = 980

Calculation of the equation and the number of quarters and dimes:

Since Yodelin has fifty quarters and dimes. Their total value is $9.80.

So here the equations be

q + d = 50...(1)

25q + 10d = 980...(2)

Now we have to Multiplying (1) by 25

So,

25q + 25d = 1250 ...(3)

25q + 10d = 980...(4)

Now

subtracting (4) from (3)

15d = 270

d = 18

So,

q = 50 - 18

   = 32

Learn more about equation here; https://brainly.com/question/18648019

protons are present in sodium atom.
a 11
b 10
C 12
d 9

Answers

11

Explanation:

There are 11 protons in a sodium atom

help do number 16 and 17​

Answers

Answer:

16 is d and i have no idea for 17

The shortest path between two points is:

1) displacement

2) breadth

Answers

Answer:

the shortest path between two points is displacement..

Explanation:

Hope this helps you✌️✌️

Thanks .....

Follow for more help...

insta id :-ankitakki45..

The shorts path between two points is displacement.

A freshly prepared sample of radioactive isotope has an activity of 10 mCi. After 4 hours, its activity is 8 mCi. Find: (a) the decay constant  and half-life T1/2; (b) How many atoms of the isotope were contained in the freshly prepared sample? (c) What is the sample's activity 30 hours after it is prepared?

Answers

Answer:

(a). The decay constant is [tex]1.55\times10^{-5}\ s^{-1}[/tex]

The half life is 11.3 hr.

(b). The value of N₀ is [tex]2.38\times10^{11}\ nuclei[/tex]

(c). The sample's activity is 1.87 mCi.

Explanation:

Given that,

Activity [tex]R_{0}=10\ mCi[/tex]

Time [tex]t_{1}=4\ hours[/tex]

Activity R= 8 mCi

(a). We need to calculate the decay constant

Using formula of activity

[tex]R=R_{0}e^{-\lambda t}[/tex]

[tex]\lambda=\dfrac{1}{t}ln(\dfrac{R_{0}}{R})[/tex]

Put the value into the formula

[tex]\lambda=\dfrac{1}{4\times3600}ln(\dfrac{10}{8})[/tex]

[tex]\lambda=0.0000154\ s^{-1}[/tex]

[tex]\lambda=1.55\times10^{-5}\ s^{-1}[/tex]

We need to calculate the half life

Using formula of half life

[tex]T_{\dfrac{1}{2}}=\dfrac{ln(2)}{\lambda}[/tex]

Put the value into the formula

[tex]T_{\dfrac{1}{2}}=\dfrac{ln(2)}{1.55\times10^{-5}}[/tex]

[tex]T_{\dfrac{1}{2}}=44.719\times10^{3}\ s[/tex]

[tex]T_{\dfrac{1}{2}}=11.3\ hr[/tex]

(b). We need to calculate the value of N₀

Using formula of [tex]N_{0}[/tex]

[tex]N_{0}=\dfrac{3.70\times10^{6}}{\lambda}[/tex]

Put the value into the formula

[tex]N_{0}=\dfrac{3.70\times10^{6}}{1.55\times10^{-5}}[/tex]

[tex]N_{0}=2.38\times10^{11}\ nuclei[/tex]

(c). We need to calculate the sample's activity

Using formula of activity

[tex]R=R_{0}e^{-\lambda\times t}[/tex]

Put the value intyo the formula

[tex]R=10e^{-(1.55\times10^{-5}\times30\times3600)}[/tex]

[tex]R=1.87\ mCi[/tex]

Hence, (a). The decay constant is [tex]1.55\times10^{-5}\ s^{-1}[/tex]

The half life is 11.3 hr.

(b). The value of N₀ is [tex]2.38\times10^{11}\ nuclei[/tex]

(c). The sample's activity is 1.87 mCi.

Which property describes the number of waves that move past a point each second.
A) Speed
B) Frequency
C) Period
D) Wavelength

Answers

Answer:B) Frequency

Explanation:

Answer:

B) Frequency

Explanation:

Other Questions
Which statement BEST describes the Vikings in Medieval Europe?A:they never became part of Christian EUROPE B:they created the largest land based empire in history C: they were a roving group who raided towns to supplement their economy D:they were instrumental in helping to drive Muslim invaders out of Western Europe What mean by material? PLZZZZZ HELP!!!!!Why is Mary known as the New Ark of the Covenant? Include three biblical passages that support this theory. Les touristes vont ____ htel. A) de l Ils parlent _____ hpital. B) l Nous rentrons ____ cinma. C) du How would you find the effect of the action Susan went to the grocery store? Tmas *Does anybody get this like is it 1234 or 5 Incorrect00:00The map shows the beach area on a coordinate plane.Find the distance from the car to the cabana and then from the cabana to the beach.Car3-CabanaBeac-5-310123.5. How did the three kingdoms period affect dynasties in China ? Which number represetns a coefficient?2347 Help pls idk how to do this idk if i will set it up right Why was the Proclamation of 1763 a cause of the American Revolution? A goblin makes 50 pounds of goo in 2 hours. What is the unit rate? From where did the Muslims learn the Greek knowledge?from BaghdadOfrom Romefrom books saved from conquestfrom capturing Greek philosophers The map below shows the location of some natural resources in North America. The map shows various natural resources across North America. In Mexico, the map indicates copper, silver, and iron are found. Across the United States, iron, oil, coal, copper, gold, and silver are found. In Canada, lead and zinc, coal, copper, oil, iron, gold, silver, and uranium are found. 2011 FLVSAccording to the map, which natural resource can only be found in Canada? Oil Silver Coal Uranium In the 1800s, the United States was still a very young nation, trying to solidify its identity. The Industrial Revolution began in Great Britain, a fast development of society following the introduction of machines. The United States was slower than Great Britain to fully embrace the changes. Yet key technological developments caused a rapid growth in American urban areas. Better farming methods and tools in the 1800s increased food production. Americans were able to grow enough food for their families as well as to sell. The abundance caused food prices to fall. The expansion of cotton and the growth of textile factories in northern states helped produce the first wave of American industry. More people turned to work in northern factories as a way to support their families. Thousands of immigrants to the United States also settled in or near port cities, looking for work. Even today, the need for work is a common reason people move to urban areas. As a result, cities grew in numbers of people and physical space. As more people and businesses moved in, they needed buildings for living and working. They needed ways to move around the city. We call this process urbanization. In 1820, the United States had only a few cities of 10,000 residents or more. About seven percent of U.S. residents lived in urban areas. The number of cities with more than 10,000 people grew quickly over the next 40 years, especially in the Northeast and Midwest. By 1860, about 20 percent lived in cities. Philadelphia and New York City were the most populated cities in 1860 and would soon reach one million residents. The urbanization of the United States quickened due to technology improvements. Without innovations in food production, the factories could not have grown so quickly. The trend quickened after 1860 and continued throughout the 21st century as well. By 2007, more Americans lived in or near cities than they did in rural areas. Select a sentence from the body of this article that can be removed without affecting the author's explanation. Place the sentence in quotes and explain why it is an unnecessary detail. Type your response in the box.Different kinds of substances have different properties. Compare and contrast the electrical properties of salts, acid , metals Match the qualitative characteristics below with the following statements.1. Timeliness2. Completeness3. Free from error4. Understandability5. Faithful representation6. Relevance7. Neutrality8. Confirmatory valuea. Quality of information that assures users that information represents the economic phenomena that it purports to represent.b. Information about an economic phenomenon that corrects past or present expectations based on previous evaluations.c. The extent to which information is accurate in representing the economic substance of a transaction.d. Includes all the information that is necessary for a faithful representation of the economic phenomena that it purports to represent.e. Quality of information that allows users to comprehend its meaning. what are all the fractions that are equivalent to 5/6 Meiosis produces which type of cells?O Haploid somatic cellsDiploid somatic cellsHaploid gametesDiploid gametes Why is honesty important in a friendship?? I need it for a writing!!