Answer:
20 moles = (96.7+)
345%20 moles inter = h20
h2+345%20 moles
kalkadanc = jani+CARSORI
564 MOLES
Explanation
we have to plus the moles that we can get the answer and u should now the formula of kalkadanc and just % will get to the correct answer.
i think u may understand and this is the correct answer i had practice this too much
Which of the following statements is true regarding both theories and laws?
A: Change over time
B: Cannot be proven
C: Require consensus
D: Supported by observations
Answer:
D. Supported by observations
Explanation:
Because theories change over time, they both need to be proven, they do not go off of consensus, but they do need to be supported by observations.
HOPE IT HELPS❣️
Which of the following elements has 3 electrons in the 2p sublevel?
O A. O
O B. C
O C. B
O DN
Answer:
the answer is D. N
AP3X
According to electronic configuration, there are 3 electrons in the 2p sublevel ,hence the correct option is D.
Electronic configuration is defined as the distribution of electrons that are present in an atom or molecule in an atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is important for understanding the structure of periodic table. It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions so as to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in their ground state and hence are said to be stable.
Thus, the correct option is D.
Learn more about electronic configuration,here:
https://brainly.com/question/29184975
#SPJ4
Will give brainliest, Look at the graph above. Compare it to the periodic table. What do you notice about the location on the periodic table of the elements that represent the high points
Answer:
We can see that the atomic radius decreases across every row.
Explanation:
I will comment more below.
The elements that represent the highest points on the graph are all elements of group 1 and occur at the head of the period to which they belong.
The periodic table is an arrangement of elements in groups and periods. The elements in the same group have the same number of valence electrons while the elements in the same period have the same number of shells.
Looking at the graph, we can see that the high points in the graph all correspond to the group 1 elements; sodium, potassium, rubidium and cesium.The have the highest atomic radii in the period. Atomic radii increases down the group but decreases across the period. Remember that these elements are at the head of the period to which they belong hence they have the highest atomic radii.
Learn more: https://brainly.com/question/9352088
Which one of the following is NOT a proper unit for frequency? *
m·s–1
Hz
s–1
1/s
Answer:
m*s⁻¹.
Explanation:
Hello!
In this case, since the frequency measures how repetitive an event is per unit of time, for instance the laps a car drives every 5 minutes or something similar, we can infer it has units of event/time; in such a way, the unit m*s⁻¹ is not a proper unit of frequency because it is a proper unit of velocity which is the distance traveled per unit of time.
In such a way, Hz (hertz), s⁻¹ and 1/s are possible ways frequency can be represented.
Best regards!
Why is it necessary to add concentrated HCl, then water, rather than a solution of HCl to the eudiometer tube
If we add water to a concentrated acid, then the solution may boil very violently, splashing concentrated acid. If add acid to water, the solution that forms is very dilute and a small amount of heat is released.
Why do we add acid to water?When a strong acid is poured into water, it flows down the flask and mixes much better, so no boiling takes place. The addition of water to acid forms an extremely concentrated solution of acid initially. A large amount of heat is released and the solution may boil very violently, splashing concentrated acid out of the beaker and all this because the reaction is exothermic in nature.
The reason this takes place is due to a large amount of energy liberated in the hydration reaction of concentrated ions. Therefore, we add acid to water dropwise for the dilution with constant stirring and not water to acid directly.
If we add water to acid, then an exothermic reaction occurs and the solution may boil very violently. To form the dilute solution of any strong acid, you should add acid to water and the small amount of heat released is not sufficient to vaporize and spatter it.
Learn more about dilution of acid, here:
https://brainly.com/question/
#SPJ2
Why does the flask have to be closed during the hydrochloric acid and sodium carbonate reaction?
Answer:
The flask has to be closed during the hydrochloric acid and sodium carbonate reaction as the resultant gas got trapped inside the closed flask.
Explanation:
The hydrochloric acid and sodium carbonate reaction was exothermic that caused the pressure to decrease. The flask has to be closed during the hydrochloric acid and sodium carbonate reaction as the resultant gas got trapped inside the closed flask.
In exothermic reactions, energy is produced in the form of heat or light.
Calculate the time required for a constant current of 0.868 A to deposit 0.387 g of Tl(III) as Tl(s) on a cathode.
Answer:
632.7 secs
Explanation:
Equation of the reaction:
Tl^3+ + 3e ------> Tl
If 1F = 96500 C
Q= It
Where;
I= current
t= time
3× 96500 C deposited 204 g of Tl
0.868 × t deposited 0.387 g of Tl
3 × 96500 × 0.387 = 204 × 0.868 × t
t= 3 × 96500 × 0.387/ 204 × 0.868
t= 632.7 secs
The time required for a constant current of 0.868 A to deposit 0.387 g of Tl(III) as Tl(s) is 2689 s
We'll begin by calculating the quantity of electricity needed to deposit 0.387 g of Ti
Ti³⁺ + 3e —> Ti
Recall:
1 mole of Ti = 48 g
1 electron (e) = 96500 C
Thus,
3 electrons = 3 × 96500 = 289500 C
From the balanced equation above,
48 g of Ti was deposited by 289500 C of electricity.
Therefore,
0.387 g of Ti will be deposited by = (0.387 × 289500) / 48 = 2334.09375 C of electricity
Finally, we shall determine the time required.Quantity of electricity (Q) = 2334.09375 C
Current (I) = 0.868 A
Time (t) =?t = Q / I
t = 2334.09375 / 0.868
t = 2689 sTherefore, the time required for the reaction is 2689 s
Learn more: https://brainly.com/question/17135793
A 12 gram piece of Cu at 475 oC is placed in contact with a 15 gram piece of Cr at 265 oC.
Assume the two pieces of metal are the system and that there is no heat exchange between system and surrounding.
What is the final temperature of the two pieces of metal expressed in degree C?
Answer:
349.22°C
Explanation:
Let the final temperature of the two pieces of metal be x.
Now, the warmer metal which is C u reduces from 475°C to x. Thus Δt for C u is; Δt1 = 475 - x.
The cooler metal Cr increases in temperature from 265°C to x. Thus, it's change in temperature is Δt for Cr is; Δt2 = x - 265.
Now from conservation of energy, the amount of energy leaving the C u metal is equal to the amount of energy entering the Cr metal.
Thus;
q_lost = q_gain
Where;
q_lost = m1•c1•Δt1
q_gained = m2•c2•Δt2
Now, c1 & c2 are the specific heat capacity of C u and Cr respectively.
From online tables, c1 = 0.385 J/g°C and c2 = 0.46 J/g°C
We are given;
m1 = 12g and m2 = 15g
Thus;
12 × 0.385 × (475 - x) = 15 × 0.46 × (x - 265)
2194.5 - 4.62x = 6.9x - 1828.5
6.9x + 4.62x = 2194.5 + 1828.5
11.52x = 4023
x = 4023/11.52
x = 349.22°C
The three lines in this Lewis dot structure represent the.
A)
three valence electrons of dinitrous oxide.
B)
six electrons in the triple bond of diatomic nitrogen.
C)
three electrons joining two nitrogen atoms in a diatomic molecule.
D)
three double bonds between the valence electrons of diatomic nitrogen.
Answer:
B) . six electrons in the triple bond of diatomic nitrogen
Explanation:
The three line in this Lewis dot structure represents the six electrons in the triple bond of diatomic nitrogen.
Nitrogen is made up of 7 electrons with 5 valence ones.
A lewis structure is made up of the symbol of the element surrounded by dot to represent the valence electrons.
In this nitrogen molecule, both species share 6 electrons. This makes each nitrogen atom isoelectronic with neon.
What is one example of chemical weathering affecting a rock
Answer:
one example of chemical weathering is when carbon dioxide mixes with water.
Explanation:
when dioxide mixes with water it creates carbonation.
List 5 foods that contain bacteria?
How many grams of Ag2CO3 will precipitate when excess Na2CO3 solution is added to 40.0 mL of 0.679 M AgNO3 solution
Answer:
The answer is "[tex]37.45364 \ g[/tex]"
Explanation:
Equation:
[tex]2AgNO_3 (aq) + Na_2CO_3 (aq) \longrightarrow Ag_2CO_3 (s) + 2NaNO_3 (aq)[/tex]
Calculating the mol of [tex]AgNO_3[/tex]:
[tex]\to V = 40.0 mL\\\\[/tex]
[tex]= 40.0 \times 10^{-2} \ L \\\\[/tex]
[tex]\to n = Molarity \times Volume \\\\[/tex]
[tex]= 0.679 \times 40.0 \times 10^{-2}\\\\= 27.16 \times 10^{-2} \ mol[/tex]
mol of [tex]Ag_2CO_3= \frac{1}{2} \times n\\\\[/tex]
[tex]= \frac{1}{2} \times 27.16 \times 10^{-2}\\\\= 13.58 \times 10^{-2}\\\\[/tex]
Calculating the molar mass of [tex]Ag_2CO_3[/tex],:
[tex]= 2\times MM(Ag) + 1 \times MM(C) + 3 \times MM(O)\\\\= 2 \times 107.9 + 1 \times 12.01 + 3 \times 16.0\\\\= 275.81 \ \frac{g}{mol}[/tex]
Calculating the mass of [tex]Ag_2CO_3[/tex],
[tex]m = mol \times molar \ mass[/tex]
[tex]= 13.38 \times 10^{-2}\ mol \times 2.758 \times 10^2 \ \frac{g}{mol}\\\\= 37.45364 \ g[/tex]
Answer them please thanks
Answer:
(3) sorry if I'm wrong
7. (1-fertilization [sorry if wrong again]
8. (4-mitosis
Explanation:
I'm learning about this right now...Sorry if I'm wrong but I'm pretty sure they're right! Hope this helps tho! if I'm right maybe mark me brainliest?
An excess of oxygen reacts with 451.4 g of lead, forming 374.7 g of lead(II) oxide. Calculate the percent yield of the reaction.
Answer: The percent yield of the reaction is 77.0 %
Explanation:
[tex]2Pb+O_2\rightarrow 2PbO[/tex]
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
[tex]\text{Number of moles of lead}=\frac{451.4g}{207.2g/mol}=2.18moles[/tex]
[tex]\text{Number of moles of lead oxide}=\frac{374.7g}{223.2g/mol}=1.68moles[/tex]
According to stoichiometry:
2 moles of [tex]Pb[/tex] produces = 2 moles of [tex]PbO_2[/tex]
2.18 moles of [tex]Pb[/tex] is produced by=[tex]\frac{2}{2}\times 2.18=2.18moles[/tex] of [tex]PbO_2[/tex]
Mass of [tex]PbO_2[/tex] =[tex]moles\times {\text {Molar mass}}=2.18\times 223.2g/mol=486.6[/tex]
percent yield =[tex]\frac{374.7g}{486.6g}\times 100=77.0\%[/tex]
If the stack of bricks on the right has a mass of 240 kg, approximately what is the mass of the stack of bricks on the left?
A.
2400 kg
B.
720 kg
C.
320 kg
D.
480 kg
Answer:
720
Explanation: study island
Answer:
720
Explanation:
The atom is one of the basic units of matter. Which part of the atom mostly determines the size of the atom?
a.Electrons
b.Nucleus
c.Neutrons
d.Protons
Answer:
Atomic size is the distance from the nucleus to the valence shell where the valence electrons are located. The separation that occurs because electrons have the same charge. The number of protons in the nucleus. The core electrons in an atom interfere with the attraction of the nucleus for the outermost electrons.
Explanation:
That would be B I believe, but please correct me if I'm wrong.
Question 2 of 25
Rain exists in which phase?
O A Liquid
O B. Solid
C. Plasma
D. Gas
Answer:
liquid
Explanation:
correct answer hope it helps
A Barometer reads 29.1 inches of mercury.Calculate this pressure in mmHg.
What is the answer?
This follows a simple conversion technique. Basically what the question is trying to say here is to convert 29.1 inHg to mmHg. 1 inHg is equal to 25.4 mmHg so 29.1 inHg would be equal to [tex]25.4 * 29.1[/tex] which when evaluated turns out to be: [tex]739.14[/tex]. :D
The pressure will be 739.14 mm Hg.
What is pressure?The SI unit measuring pressure would be the pascal, which measures the force of each unit area of the surface.
Calculation of pressure
It is known that 1inHg = 25.4 mm Hg.
Hence, the pressure = 25.4 × 29.1 = 739.14 mm Hg
Therefore, the pressure will be 739.14 mm Hg.
To know more about pressure
https://brainly.com/question/15175692
#SPJ2
A scientist is considering formaldehyde (HCHO) for use in an experiment. She is studying the strength of triple bonds in molecules. Is
ormaldehyde a good choice for her to use? Why?
A. Yes, HCHO has three triple bonds.
B. Yes, HCHO has one triple bond.
C. No, HCHO has a double bond but no triple bonds.
D. No, HCHO has only single bonds.
A commonly held idea about influenza is that it is a disease that occurs primarily in cold weather. Doctors report incidences of illness, such as influenza, to the Centers for Disease Control (CDC). The graph below shows data for three flu seasons. Note that this graph shows data from October, week 40, of one year to July, week 28, of the following year.
Which evidence supports this idea?
The graph line for 2008-09 has the highest peaks for flu.
All three graph lines show different patterns throughout the year.
The graph line for 2008-09 has a peak in week 44.
All three graph lines peak over the same few weeks of winter.
Answer:
D.All three graph lines peak over the same few weeks of winter.
Explanation:
took the test
What is the best-known feature of sedimentary
rocks?
A. ripple marks
B. fossils
C. graded bedding
D. cross-bedding
Answer:
option is (b)
Explanation:
please mark me as brilliant
TRUE OR FALSE? Alloys are used more than pure metals because they are generally softer and less likely to react with air or water. WILL GIVE BRAINLIEST
Answer:
False
Explanation:
They’re used cause they’re generally harder than pure metals
Alloys are used much more than pure metals because they are generally stronger and less likely to react with air or water...
So I would say false
A 7.28 g sample of chromium metal was heated to produce chromium oxide. The weight of the compound was 10.63 g. What is the percent chromium in this compound?
Answer:
68.48%
Explanation:
The percent mass of an element in a compound tells us about the amount of such element contributed to the total compound.
In this case, 7.28 g sample of chromium metal was heated to produce chromium oxide with weight of 10.63 g. The percent mass of chromium in chromium oxide can be calculated by using the formula:
%mass of Cr = mass of Cr/mass of Chromium oxide × 100%
%mass of Cr = 7.28/10.63 × 100
%mass of Cr = 0.6848 × 100
%mass of Cr = 68.48%
why saturated fatty acid can’t create kink ?
Trinitrotoluene (TNT, C7H5N3O6) undergoes complete combustion according to the following balanced chemical equation:
C7H5N3O6(s)+214O2(g)→7CO2(g)+32N2(g)+52H2O(l)
If 25.7 g of TNT is combusted in a 0.500 L container filled with O2 at a pressure of 7.02 bar and a temperature of 298 K, calculate the maximum mass of CO2 that could be produced.
Answer:
[tex]m_{CO2}=8.33gCO2[/tex]
Explanation:
Hello.
In this case, since the chemical reaction is:
[tex]C_7H_5N_3O_6(s)+\frac{21}{4} O2(g)\rightarrow 7CO_2(g)+\frac{3}{2} N_2(g)+\frac{5}{2} H_2O(l)[/tex]
Thus, since we have the initial moles of TNT:
[tex]n_{TNT}=25.7g*\frac{1mol}{227.13g} =0.113mol[/tex]
And the initial moles of oxygen given the ideal gas equation:
[tex]n_{O_2}=\frac{6.93atm*0.5L}{0.082\frac{atm*L}{mol*K}*298K}=0.142molO_2[/tex]
Given the 1:7 mole ratio between TNT and carbon dioxide and the 21/4:7 mole ratio between oxygen and carbon dioxide, we compute the yielded moles by each reactant:
[tex]n_{CO_2}^{by\ TNT}=0.113molTNT*\frac{7molCO_2}{1molTNT}=0.791molCO_2\\\\ n_{CO_2}^{by\ O_2}=0.142molO_2*\frac{7molCO_2}{21/4molO_2}=0.189molCO_2[/tex]
Thus, since oxygen yields less moles of carbon dioxide than TNT, we infer it is the limiting reactant, therefore, the produced mass of carbon dioxide is:
[tex]m_{CO2}=0.189molCO2*\frac{44.01gCO2}{1molCO2}\\\\m_{CO2}=8.33gCO2[/tex]
Best regards!
Whenever the same two elements form more than one
compound, the different masses of one element that combine
with the same mass of the other element are in the ratio of
small whole numbers.
TRUE
FALSE
Answer:
The answer is true
Explanation: Because The law of multiple proportions states that when two elements react to form more than one compound, a fixed mass of one element will react with masses of the other element in a ratio of small, whole numbers.
Draw and name the structures of the carboxylic acids and esters you put together using molecular models.
Answer:
This question is incomplete
Explanation:
However, when the carboxylic acids and esters put together are obtained, the procedure below can be followed in drawing and naming them.
For carboxylic acid,
1) it should be noted that the functional group here is -COOH which is drawn as -C = OH
|
OH
2) The carbon of the functional group is included among the carbon to be counted when naming the structure. For example, the compound below is propanoic acid.
CH₃CH₂COOH - As you can see that there are 3 carbons linked chain there.
3) As can be seen in (2) above, the suffix "oic" is used to name carboxylic acids
4) The carbon chain here is saturated (meaning there is no double or triple bond within the carbon chain)
Example of a structure of carboxylic acid is
H₃C - CH₂ - CH₂ - C = OH
|
OH
The structure above is a butanoic acid
For ester
1)The functional group here is -COO- . which can be drawn as
- C = O
|
O -
(meaning one oxygen atom is double bonded to the carbon and the other oxygen atom is bonded to another carbon chain)
2) The alkyl group attached to the oxygen atom is first of all mentioned before the carbon chain attached from the left is mentioned. For example, CH₃CH₂CH₂COOCH₂CH₃ is ethyl butanoate
3) As seen from (2) above, the suffix "oate" is used to end the name of esters
4) As also seen from (2) above, the carbon of the functional group is also included while counting the carbon chain of the parent name (butanoate).
5) The carbon chains here are also saturated.
Example of this ester is
CH₃CH₂C = O
|
O - CH₂CH₃
The name of this compound is ethyl propanoate
please help 10 points asap
Answer:
opposite
Explanation:
Answer:
opposite
Explanation:
cu9c9ucoucucpucfpufupfpucupvpjvpucu
HELP
What type of bond is formed between the carbon and either oxygen in CO2?
A) Single
B) Double
C) Triple
PLEASE HELP ME!!!!!!!!!!!!!!!!!!!
WRITE A SHORT PASSAGE ON HOW FIBRES ARE SPUN
HELPPP WILL MARK AS BRAINLIEST
Answer: Spun yarn is made by twisting staple fibers together
To make a cohesive thread Or “single”. Twisting fibers, into yarn in the process called spinning can be dated back to the upper Paleolithic. Yarn spinning was one of the first processes to be industrialized.
Explanation: