Answer:
C = 18.29 g
Explanation:
Given data:
Mass of beryllium needed = ?
Mass of nitrogen = 18.9 g
Solution:
Chemical equation:
3Be + N₂ → Be₃N₂
now we will calculate the number of moles of nitrogen:
Number of moles = mass/molar mass
Number of moles = 18.9 g/ 28 g/mol
Number of moles = 0.675 mol
Now we will compare the moles of nitrogen and Be from balance chemical equation.
N₂ : Be
1 : 3
0.675 : 3/1×0.675 = 2.03 mol
Number of moles of Be needed are 2.03 mol.
Mass of Beryllium:
Mass = number of moles × molar mass
Mass = 2.03 mol × 9.01 g/mol
Mass = 18.29 g
What is the mass of .89 moles of lithium metal, used in laptop batteries?
The mass of lithium metal that is used in lithium batteries is 6.17 grams, this can be calculated by using number of moles formula.
Number of moles:It is defined as the ratio between mass and molar mass.
It is given by:
Number of moles = mass / Molar mass
What information do we have?
Number of moles= 0.89 moles
Molar mass of Lithium metal= 6.941 g/mol
To find:
Mass of Lithium metal=?
On substituting the values
n= m/M
0.89 = m/ 6.941
m= 0.89*6.941
m= 6.177 grams
Thus, the mass of lithium metal is 6.177 grams.
Find more information about Number of moles here:
brainly.com/question/13314627
6. What is the equilibrium constant for the following reaction?
C+02 = CO2
Given
Reaction
C+02 = CO2
Required
The equilibrium constant
Solution
The equilibrium constant is the ratio of concentration or pressure between the product and the reactant with each reaction coefficient raised
The equilibrium constant is based on the concentration (Kc) in a reaction
pA + qB -----> mC + nD
[tex]\large {\boxed {\bold {Kc ~ = ~ \frac {[C] ^ m [D] ^ n} {[A] ^ p [B] ^ q}}}}[/tex]
So for the reaction :
C+O₂ ⇔ CO₂
[tex]\tt Kc=\dfrac{[CO_2]}{[C][O_2]}[/tex]
Select the correct balanced equation for the single displacement reaction of bromine and potassium iodine.
Br + Kl -> KBr +1
Answer:
D
D...............DDDDDDD
Answer: D
Explanation:
The answer is D as it is the only correctly balanced equation.
What do most mollusks have?
C
Answer:
C- A foot
Particularly a muscular foot.
Answer/Explanation
you"re right they have a foot
Muscular foot for creeping or burrowing. Some also have a head with sense organs.
did u need someone to confirm it or what
Imagine an alternate universe where the value of the Planck constant is 6.6207 x 10^-36 J*s.
In that universe, which of the following objects would require quantum mechanics to describe, that is, would show both particle and wave properties? Which objects would act like everyday objects, and be adequately described by classical mechanics?
3.A turtle with a mass of 450. g, 29. cm long, moving at 2.7 cm/s.
quantum or classical?
Answer:
See explanation
Explanation:
According to Louis de Broglie, particles could exhibit wavelike properties and have an associated wavelength.
Now for a turtle with a mass of 450. g, 29. cm long, moving at 2.7 cm/s, recall that we can only describe a by quantum mechanics when the body is very small and its associated wavelength is large.
This object has a large mass, hence it is discussed by classical rather than quantum mechanics
8. How many moles of carbon dioxide are there in 52.06 g of carbon dioxide?
A) 0.8452
B) 1.183
C) 6.022 x 1023
D) 8.648 x 1023
E) 3.134 x 1025
Answer:
B) 1.183
Explanation:
To convert from grams (mass) to moles, we need to divide by the atomic mass (amu)..
The amu of [tex]CO_{2}[/tex] is 44.008
52.06/44.08 = 1.182966733
This can be rounded to 1.1830 moles of CO2
1.183 moles of carbon dioxide are there in 52.06 g of carbon dioxide.
Explanation:
Moles of substance are defined ratio of the given mass of the substance to the molar mass of the substance.Given :
The 52.06 grams of carbon dioxide.
To find :
The moles of carbon dioxide.
Solution:
The mass of carbon dioxide = 52.06 g
The molar mass of carbon dioxide = 44.01 g/mol
The moles of carbon dioxide:
[tex]=\frac{52.06 g}{44.01 g/mol}=1.183 mol[/tex]
1.183 moles of carbon dioxide are there in 52.06 g of carbon dioxide.
Learn more about the number of moles here:
brainly.com/question/16192776?referrer=searchResults
brainly.com/question/2293228?referrer=searchResults
Which chemical equation is unbalanced?
C + O2 Right arrow. CO2
Sr + O2 Right arrow. 2SrO
6H2 + 3O2 Right arrow. 6H2O
H2 + H2 + O2 Right arrow. H2O + H2O
Answer:
Sr + 02 Right arrow.2Sr0
Answer:
b
Explanation:
A parallel circuit contains four identical lamps. The current through the energy source is 4 A. The total resistance of the circuit is 10 Ω. What is the voltage across the energy source and across each lamp
Answer:
a parallel circuit has two or more paths for current to flow through voltage is the same across each component of the parallel circuit the sum of the current through each path is equal to the total current that follows from the source another definition is in a parallel circuit all components are connected across each other formally exactly two sets of electricity common points a branch in a parallel circuit in a path of electricity current formed by one of the load component
Which change of state involves a release of energy?
Answer: CONDENSATION When steam is cooled, it releases thermal energy and turns into its liquid state. This process is called condensation. reversed if the liquid is cooled. The change from the liquid state to the solid state is called freezing
What is the frequency of a photon that has a wavelength of 6.58 x 10-8m?
Answer:
6 x 10 (power to the 15) H2
Answer:
i dont know the answer but you could search up photon calculator, hope this helps (im very sorry i couldnt help but i havent learned about that yet, im in 9th grade)
An idea based on observations with no experimental evidence is a:
ammonium phosphate is an important ingredient in many solid fertilizers. It can be made by reacting aqueous phosphoric acid with liquid ammonia. Calculate the moles of ammonium phosphate produced by the reaction of 2.4 mol of ammonia. Be sure your answer has a unit symbol, if necessary, and round it to significant digits.
Answer:
0.57 moles (NH4)3PO4 (2 sig. figs.)
Explanation:
To quote, J.R.
"Note: liquid ammonia (NH3) is actually aqueous ammonium hydroxide (NH4OH) because NH3 + H2O -> NH4OH.
H3PO4(aq) + 3NH4OH(aq) ==> (NH4)3PO4 + 3H2O
Assuming that H3PO4 is not limiting, i.e. it is present in excess
1.7 mol NH4OH x 1 mole (NH4)3PO4/3 moles NH4OH = 0.567 moles = 0.57 moles (NH4)3PO4 (2 sig. figs.)"
What is creating our Earth's Magnetic field?
1) Our Earth's iron liquid outer core rotating around the solid inner core
2) Our Earth having a stationary inner core
3) Our Earth having rocky center
4) All of the above
Answer:
1) Our Earth's iron liquid outer core rotating around the solid inner core
Explanation:
The earth's magnetic field or the geomagnetic field is produced as a result of the earth's iron liquid outer core rotating around the solid inner core.
This produces the earth's magnetic field.
The earth's core is made up of solid and liquid region. Only the densest elements are found within this region. So, the core is made up of metals which are mainly iron and nickel. The outer core is liquid or molten iron and the inner core is solid. The molten iron and nickel in the outer core moves around the inner core and generates the currents which induces a magnetic field round the earth.Jill graphs the speed of a model train that is travelling at a speed of 15 kilometers per hour. Which graph shows the speed of the model train?
Answer:c
Explanation:
Leopard seals are animals adapted to survive in the freezing conditions of Antarctica. Individual leopard seals vary in their different traits.
Which of the following variations would give a leopard seal the greatest chance of surviving in its harsh environment?
A. More spots on its coat. B. Thicker layer of blubber
C. More elongated head
D. Wider, flatter teeth
Answer:
B. Thicker layer of blubber
Explanation:
For the leopard seals to survives this harsh environment, it must have a thicker layer of blubber
Blubber is a thick layer of fat. It is called the adipose tissues and found in most marine organisms.
This layer helps in insulating the body against heat loss. By so doing, the animal is able to conserve internal heat. They have low thermal conductivity and do not easily lose heat or gain heat as such.Answer:
B
Explanation:
Which statement best describes the polarity of SF 4 CI 2?
Always polar , always non polar or depending on the arrangement of outer atoms ?
Answer:
use common sense!........
What is the correct name of CUCIO2
Chemistry
Answer:
Copper(II) Chlorite = Cu(ClO2)
Explanation:
how you write the compound is very important as well
Sulfur dioxide (SO2) is an unwelcome result
of burning soft coal in power plants. Some
of the SO2 ends up as sulfuric acid in acid
precipitation. The net reaction is
2 SO2(g) + O2(g) + 2 H2O(l) —— 2 H2SO4(l)
What mass in grams of SO2 is needed to
react with 1771 g of O2?
Answer in units of g.
Answer:
I believe it is 1771 divided by 4
Explanation:
Many organisms on Earth exhibit similar ____________.
Question 1 options:
time
single-celled
characteristics
nonliving
Answer:
characteristics
Explanation:
i promise becasue i am a teacher so i hope you like it
How far in advance is weather forecasting most accurate?
one week
one month
multiple years
multiple months
Answer:
One week.
Explanation:
I would think one month because on weather websites you can see a month of weather. But the closer the day your looking at the prediction will be more accurate.
The most accurate range of data for weather forecasting is: A. one week.
What is weather?Weather can be defined as the average atmospheric conditions of a particular area (region) over a short period of time.
The elements of weather.Some examples of the elements of weather include the following:
PrecipitationAtmospheric pressureRelative humidityWind speedTemperatureIn meteorology, the most common forecasted element of weather is temperature (degree of hotness or coldness) and it usually done a weekly basis such as one week.
Read more on weather here: https://brainly.com/question/24730207
The following chemical reaction takes place in aqueous solution:
AgF(aq)+Nal(aq) ——> Agl(s)+NaF(aq)
Write the net ionic equation for this reaction.
The net ionic equation : Ag⁺(aq)+l⁻(aq) ⇒ Agl(s)
Further explanationGiven
Reaction
AgF(aq)+Nal(aq) ——> Agl(s)+NaF(aq)
Required
The net ionic equation
Solution
The equation of a chemical reaction can be expressed in the equation of the ions
In the ion equation, there is a spectator ion that is the ion that does not react because it is present before and after the reaction
When these ions are removed, the ionic equation is called the net ionic equation
AgF(aq)+Nal(aq) ——> Agl(s)+NaF(aq)
Ag⁺(aq)+F⁻(aq)+Na⁺(aq)+l⁻(aq) ⇒ Agl(s)+Na⁺(aq) + F⁻(aq)
Ag⁺(aq)+l⁻(aq) ⇒ Agl(s)
What type of crust is colliding?
Japan Trench
Eurasian Plate
Pacific Plate
Answer: The Eurasian Plate or both the Eurasian and Pacific Plate.
Explanation:
How is the temperature scale different than a typical thermometer?
What are the names of the compounds containing silver?
Show the compound formula and their names. (WRITE CLEARLY AND NEATLY OR THE QUESTION WILL BE CONSIDERED WRONG)
Answer:
the silver compounds include:
silver chloride agcl ,
silver bromide agbr ,
and silver iodide agi.
Why does a circuit need to connect the negative to the positive sides of a battery?
Who first purpose the theory of continental drift
Answer:
The theory of continental drift is most associated with the scientist Alfred Wegener. In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other.
Explanation:
PLEASE MARK ME AS BRAINLIEST
Answer:
The scientist Alfred Wegener.
Explanation:
PLZ HELP ME BEING TIMED!!!!!
Sodium chlorite decomposes into salt and oxygen gas. What is the correct balanced decomposition reaction.
NaClO3 -> NaCl + O2
Answer:
i think it would be c
Explanation:
sorry if it is wrong
Answer:
2NaClO₃ -> 2NaCl + 3O₂
Explanation:
The number of atoms in the reactants has to equal the number of atoms in the products.
Hope that helps.
Kp/Kc for reaction for the equilibrium, A(g) ⇌ C(g)+B(g), is _______.
(Kc is the equilibrium constant in terms of concentrations, Kp is the equilibrium constant in terms of pressures, R is the gas constant, T is the temperature)
Select one:
(RT)2
(RT)-1
(RT)-2
(RT)-1.5
RT
Kp/Kc = RT
Further explanationGiven
Reaction
A(g) ⇌ C(g)+B(g)
Required
Kp/Kc
Solution
For reaction :
pA + qB ⇒ mC + nD
[tex]\large {\boxed {\bold {Kc ~ = ~ \frac {[C] ^ m [D] ^ n} {[A] ^ p [B] ^ q}}}}[/tex]
While the equilibrium constant Kp is based on the partial pressure
[tex]\large {\boxed {\bold {Kp ~ = ~ \frac {[pC] ^ m [pD] ^ n} {[pA] ^ p [pB] ^ q}}}}[/tex]
The value of Kp and Kc can be linked to the formula '
[tex]\large {\boxed {\bold {Kp ~ = ~ Kc. (R.T) ^ {\Delta n}}}}[/tex]
R = gas constant = 0.0821 L.atm / mol.K
Δn=moles products - moles reactants or
number of product coefficients-number of reactant coefficients
For reaction :
A(g) ⇌ C(g)+B(g)
number of product coefficients = 1+1=2
number of reactant coefficients = 1
Δn= 2 - 1 =1
So Kp/Kc = RT
Suppose your metal sample is hammered into the shape of a thin coin with a diameter of 8.62 cm. Determine the thickness (in mm) of this metal sheet. Use the measured metal mass and true denisty of your metal for this calculation.
measured metal mass: 83.956 g
true density: 8.90 g/cm3
Answer:
The thickness of the metal sheet is 0.162 centimeters.
Explanation:
If mass within the coin is uniformly distributed, then the density ([tex]\rho[/tex]), measured in grams per cubic centimeter, can be represented by the following formula:
[tex]\rho = \frac{m}{\frac{\pi}{4}\cdot D^{2}\cdot z }[/tex] (1)
Where:
[tex]m[/tex] - Mass, measured in grams.
[tex]D[/tex] - Diameter, measured in centimeters.
[tex]z[/tex] - Thickness, measured in centimeters.
If we know that [tex]m = 83.956\,g[/tex], [tex]D = 8.62\,cm[/tex] and [tex]\rho = 8.90\,\frac{g}{cm^{3}}[/tex], then the thickness of the coin is:
[tex]z = \frac{m}{\frac{\pi}{4}\cdot D^{2}\cdot \rho }[/tex]
[tex]z = \frac{83.956\,g}{\frac{\pi}{4}\cdot (8.62\,cm)^{2}\cdot \left(8.90\,\frac{g}{cm^{3}} \right) }[/tex]
[tex]z = 0.162\,cm[/tex]
The thickness of the metal sheet is 0.162 centimeters.