By referring only to the periodic table, select the most electronegative element in group 6A.Part A.(Express your answer as a chemical formula)Part B.By referring only to the periodic table, select the least electronegative element in the group Al, Si, P.Part C.By referring only to the periodic table, select the most electronegative element in the group Ga, P, Cl, Na.Part D.By referring only to the periodic table, select the element in the group K, C, Zn, F, that is most likely to form an ionic compound with B

Burning coal to generate electricity creates all of the following types of pollution EXCEPT: A) water pollution. When coal is burned to generate electricity, it produces various types of pollution such as particulates (B), thermal pollution (C), and mercury (D). Coal combustion indeed produces all the mentioned pollutants (E). However, it does not directly create water pollution (A).

Here is a brief explanation of each type of pollution:
B) Particulates: Coal combustion releases fine particles into the air, which can cause respiratory issues and other health problems.
C) Thermal pollution: The process of generating electricity from coal involves producing heat, which can raise the temperature of nearby water bodies. This increase in temperature can harm aquatic life and disrupt ecosystems.
D) Mercury: Coal contains trace amounts of mercury, which is released when coal is burned. Mercury pollution can contaminate water and accumulate in fish, leading to health risks for humans who consume the affected fish.
E) Coal combustion produces all above pollutants: Coal combustion is responsible for releasing particulates, causing thermal pollution, and emitting mercury into the environment.
In summary, while coal combustion contributes to various types of pollution, it does not directly cause water pollution.

For more information on water pollution see:

https://brainly.com/question/19920929

#SPJ11

Qualities of a solution known as coagulative qualities rely on the quantity of solute particles present but not on the kind of solute.

Boiling point elevation, osmotic pressure, and vapour pressure depression are a few examples of colligative qualities. Solubility is the response to the query of what is not a collative property.

The amount of a solute that can dissolve in a solvent is known as its solubility, and the solute's type does affect this quantity. Solubility is not a collative quality, then.

Learn more about   colligative property at:

https://brainly.com/question/30799665

#SPJ1

(a) The minimum frequency  and the maximum wavelength of the photon required to dissociate the NaCl molecule are 6.432 x 10^14 Hz and  4.66 x 10^-7 m.

(b) The photon is in  UV-A region of the electromagnetic spectrum.

(a) The minimum frequency of the photon required to dissociate the NaCl molecule can be calculated using the formula E = hν, where E is the bond energy of NaCl, h is the Planck's constant (6.626 x 10^-34 J s), and ν is the frequency of the photon.

Thus, ν = E/h = 4.26 eV/6.626 x 10^-34 J s = 6.432 x 10^14 Hz.

Using the formula c = λν, where c is the speed of light (3.00 x 10^8 m/s) and λ is the wavelength of the photon, we can calculate the maximum wavelength of the photon required to dissociate the NaCl molecule:

λ = c/ν = 3.00 x 10^8 m/s / 6.432 x 10^14 Hz = 4.66 x 10^-7 m.

(b) The frequency calculated above corresponds to a photon in the ultraviolet (UV) region of the electromagnetic spectrum, which has frequencies ranging from 10^14 Hz to 10^16 Hz and wavelengths ranging from 10 nm to 400 nm.

The maximum wavelength calculated above (4.66 x 10^-7 m) falls within the UV-A region, which has longer wavelengths (315-400 nm) compared to UV-B (280-315 nm) and UV-C (100-280 nm).

for more such question on  electromagnetic spectrum

https://brainly.com/question/28035263

#SPJ11

Calcium oxide, CaO, is formed when calcium reacts with oxygen, while calcium sulfide, CaS, is formed when calcium reacts with sulfur.

In the beaker where calcium reacts with oxygen, the compound calcium oxide, CaO, is formed. This is because calcium has a valency of +2 and oxygen has a valency of -2. Therefore, they combine in a 1:1 ratio to form a neutral compound. The chemical formula for calcium oxide is CaO.

Now, in the other beaker where calcium reacts with sulfur, we need to look at the valency of sulfur. Sulfur has a valency of -2, which means it requires two electrons to form a stable compound. Calcium, on the other hand, has a valency of +2. Therefore, in order for the compound to be neutral, we need two calcium atoms to combine with one sulfur atom. This gives us the chemical formula CaS, which is calcium sulfide.

In summary, when equal amounts of calcium react with oxygen and sulfur, they form different compounds. Calcium oxide, CaO, is formed when calcium reacts with oxygen, while calcium sulfide, CaS, is formed when calcium reacts with sulfur. The chemical formula of the compound formed depends on the valencies of the elements involved in the reaction.

To know more about calcium, refer to the link below:

https://brainly.com/question/14997807#

#SPJ11

Thermoplastic polymers have the unique property of being able to be reshaped when heated, making them ideal for various applications such as 3D printing and molding.

This is due to their linear molecular structure, which allows for easy movement of polymer chains when heated.

Polymers that can be reshaped when heated are called thermoplastic polymers, and their linear molecular structure allows for easy movement of polymer chains.

Polymers that can be reshaped when heated are called thermoplastic polymers.
Thermoplastic polymers are a type of polymer that becomes pliable or moldable when heated, and solidifies upon cooling.

This property allows them to be reshaped and reformed multiple times without undergoing significant degradation in their mechanical properties or composition.

Hence,  Thermoplastic polymers can be reshaped when heated, which makes them versatile and widely used in various industries.

learn more about Thermoplastic click here:

https://brainly.com/question/1339335

#SPJ11

The correct integrated rate laws for each reaction order are as follows:

Reaction Order: Zero

Integrated Rate Law: d. (A)t = kt + (A)0

Reaction Order: First

Integrated Rate Law: c. ln(A)t = kt + ln(A)0

Reaction Order: Second

Integrated Rate Law: e. (A)t = kt + (A)0

Integrated rate laws are mathematical expressions that describe the concentration or amount of a reactant or product as a function of time during a chemical reaction.

These equations are derived from the differential rate laws, which describe the rate of a reaction as a function of the concentrations of the reactants.

To learn more about the integrated rate laws, follow the link:

https://brainly.com/question/13264346

#SPJ12

The amount of dextrose contained in 250 mL of D10W is 25 g .

To determine the amount of dextrose contained in 250 mL of D10W, you can follow these steps:
Step 1: Understand the meaning of D10W.
D10W stands for a 10% dextrose solution in water, meaning that there is 10 grams of dextrose per 100 mL of solution.
D10W is a common solution used in healthcare settings, and it is important for healthcare providers to understand the concentration of dextrose in this solution in order to provide appropriate care to their patients. It is worth noting that the amount of dextrose in D10W can vary depending on the specific formulation used.
Step 2: Calculate the amount of dextrose in 250 mL.
To find the amount of dextrose in 250 mL, use the proportion:
(\frac{10 g dextrose }{ 100 mL solution}) = (\frac{x g dextrose }{ 250 mL solution})
Step 3: Solve for x.
Cross-multiply and solve for x:
10 g * 250 mL = 100 mL * x g
2500 g = 100x
x = 25 g

learn more about dextrose refer: https://brainly.com/question/30673665

#SPJ11

The volume occupied by 0.50 mole of the gas at a temperature of 35 °C and at 1 atm is 12.6 L (3rd option)

We can obtain the volume of the gas by using the ideal gas equation as shown below:

PV = nRT

1 × V = 0.50 × 0.0821 × 308

V = 12.6 L

Thus, from the above calculation, it is evident that the volume of gas is 12.6 L (3rd option)

Learn more about volume:

https://brainly.com/question/21838343

#SPJ1

The population of an organism will likely decrease if there is an increase in C, predators that prey on the organism.

Predator populations may expand due to a variety of factors, including increased food supply, decreased competition from other predators, favorable weather conditions, and efficient mating and reproduction as they need prey to survive and expand.

Human actions such as predator eradication or the introduction of non-native predator species can also result in an increase in predator populations. An ecosystem can experience drastic changes due to these foreign invasions.

Find out more on population growth here: https://brainly.com/question/1437549

#SPJ1

To classify the substances into their respective bins, C belongs to the reductant bin, [tex]CIO^{-}[/tex] belongs to the oxidant bin, NO belongs to both the oxidant and reductant bins, and Ca in its ionic form belongs to the reductant bin.

To decide if every substance is probably going to act as an oxidant or reductant, we really want to consider their oxidation states.

Beginning with C, which has an oxidation condition of 0, it can go about as a reductant by giving electrons to another substance. Interestingly, [tex]CIO^{-}[/tex] has an oxidation condition of +1 and is probably going to act as an oxidant by tolerating electrons and becoming decreased.

Then, we have NO, which has an oxidation condition of +2. Contingent upon the response conditions, NO can go about as both an oxidant and a reductant.

For instance, within the sight of diminishing specialists like [tex]Fe_{2} ^{+}[/tex] or [tex]Sn_{2} ^{+}[/tex], NO can be decreased to [tex]N_{2} O[/tex], going about as an oxidant. On the other hand, within the sight of oxidizing specialists like [tex]Br_{2}[/tex] or [tex]H_{2} O_{2}[/tex], NO can be oxidized to [tex]N_{2} O[/tex], going about as a reductant.

In conclusion, we have Ca in its strong state, which has an oxidation condition of 0. Nonetheless, when it loses electrons to frame [tex]Ca_{2} ^{+}[/tex], it can go about as a reductant.

Thusly, we can put C in the reductant receptacle, [tex]CIO^{-}[/tex]in the oxidant canister, NO in both oxidant and reductant receptacles, and Ca in the reductant container when it is in its ionic structure.

To learn more about reductant bin, refer:

https://brainly.com/question/29740395

#SPJ4

The complete question is:

Part A By using the data in Appendix E, determine whether each of the following substances is likely to serve as an oxidant or a reductant Drag the appropriate items to their respective bins. Reset Help C(0) CIOC) NO) Ca(s) Oxidant Reductant Subrnit Request Answer

The assertion stating that the term vapour is used to represent the gaseous state of a substance which is otherwise liquid at room temperature is true, but the reason is not a correct explanation.

Vapour is commonly used to describe the gaseous state of a substance that is present at a liquid or solid state at room temperature and atmospheric pressure. When a liquid or solid substance evaporates, vapours are formed that can be inhaled.

Even though the ammonia gas can be referred to as ammonia vapour,  the reason does not explain why vapour is used to describe the gaseous state of substances that are typically present in liquid or solid state at room temperature.

Learn more about the vapour here:

https://brainly.com/question/29499734

#SPJ1

Fossil fuels are formed over millions of years from the remains of dead plants and animals that have been buried under layers of rock and sediment.

These fuels contain stored carbon that was originally absorbed by the plants and animals during their lifetime. Examples of fossil fuels include coal, oil, and natural gas. When these fuels are burned for energy, the carbon is released into the atmosphere in the form of carbon dioxide, which contributes to climate change. Natural gas is a combustible mixture of hydrocarbons and other organic compounds that is found beneath the Earth's surface. Coal is a non-renewable fossil fuel that is used to generate electricity and heat, and is also used in the production of steel, cement, and other industrial products.

To learn more about carbon click here https://brainly.com/question/13719781

#SPJ11

The heat that is transferred in the reaction can be given as -42.7kJ/mol

We know that the reaction equation can be written as;

HCl + NaOH ---->NaCl +H2O

Then Number of moles of HCl = 75/1000 * 1.25 = 0.09375 moles

Then we know that the total mass of the solutions is;

(75g + 75 g) = 150 g

We would then have the heat that is absorbed by the solution in the calorimeter as;

H = mcdT

H = 150 * 4.18 * (28.32 - 21.45)

H = 4.3 kJ

The heat of the reaction is thus;

ΔH rxn = -(4.3 kJ)/0.09375 moles

= -42.7kJ/mol

Learn  more about reaction:https://brainly.com/question/28984750

#SPJ1

If two atoms are joined by a polar covalent bond, the atom with the lower electronegativity will have a partial positive charge.

If two atoms are joined by a polar covalent bond, the atom with the lower electronegativity will have a partial positive charge. In a polar covalent bond, electrons are shared unequally between the two atoms, leading to a difference in charge across the bond.

The atom with the higher electronegativity attracts the shared electrons more strongly, resulting in a partial negative charge on that atom, while the atom with lower electronegativity has a partial positive charge.

To know more about covalent bonds, refer

https://brainly.com/question/3447218

#SPJ11

The most important molecule in the ecosystem is oxygen (O2). Therefore the correct option is option D.

As it is used in the process of cellular respiration to produce energy, oxygen is crucial for the survival of the majority of Earth's creatures.

Organic substances, such as glucose, are broken down during cellular respiration to release energy, while oxygen serves as the final electron acceptor in the electron transport chain.

ATP is produced as a result of this process, and cells use ATP as a source of energy.

Other crucial ecological processes that include oxygen include the oxidation of contaminants and the creation of ozone, which helps shield the planet from the sun's harmful UV radiation. Therefore the correct option is option D.

For such more question on ecosystem:

https://brainly.com/question/26046675

#SPJ11

The conjugate acid for SO₄²⁻ is HSO₄⁻ In chemistry, a base is a substance that can accept or donate a pair of electrons, whereas a conjugate acid is a substance that forms when a base accepts a proton (H+).

In the first example, [tex]HSO4^-[/tex] is a base as it can accept a proton to become its conjugate acid, H₂SO₄. Therefore, H₂SO₄ is the conjugate acid of HSO₄⁻. In the second example, SO₄²⁻ is a base because it can accept a proton to form its conjugate acid, HSO₄⁻. Therefore, HSO₄⁻ is the conjugate acid of SO₄²⁻. In the third example, NH₃ is a base because it can accept a proton to form its conjugate acid,  NH₄⁺. Therefore,  NH₄⁺ is the conjugate acid of NH₃.

Learn more about conjugate acids here.

https://brainly.com/question/31229565

#SPJ1

25.8 g of NH₄NO₃ decomposed to produce 32.3 L of water vapor.  71.4 g of NH₄NO₃ are needed to produce 10.0 L of O₂.

a) To determine the number of liters of water vapor produced, we first need to calculate the moles of NH₄NO₃ that decompose:

The molar mass of NH₄NO₃ is:

M(NH₄NO₃) = 14.01 g/mol (N) + 4(1.01 g/mol) (H) + 3(16.00 g/mol) (O) = 80.05 g/mol

The moles of NH₄NO₃ can be calculated as:

moles NH₄NO₃  = mass/molar mass = 25.8 g / 80.05 g/mol = 0.322 moles  NH₄NO₃

From the balanced equation, we see that 4 moles of H₂O are produced for every 2 moles of  NH₄NO₃  that decompose, so we can calculate the moles of H₂O produced as:

moles H₂O = 4/2 x moles NH₄NO₃ = 4/2 x 0.322 = 0.644 moles H₂O

Finally, we can use the ideal gas law to calculate the volume of water vapor produced at 350 degrees C and 0.950 atm:

PV = nRT

V = nRT/P

V = (0.644 mol) (0.0821 L·atm/mol·K) (623 K) / (0.950 atm) = 32.3 L

Therefore, 25.8 g of NH₄NO₃ decomposed to produce 32.3 L of water vapor.

b) To determine the grams of NH₄NO₃ needed to produce 10.0 L of O2, we can use the same approach, starting with the ideal gas law:

The molar volume of a gas at standard temperature and pressure (STP) is 22.4 L/mol.

The moles of O2 needed to produce 10.0 L can be calculated as:

moles O2 = V/STP = 10.0 L / 22.4 L/mol = 0.446 moles O2

From the balanced equation, we see that 2 moles of  NH₄NO₃ decompose to produce 1 mole of O2, so we can calculate the moles of NH₄NO₃ needed as:

moles NH₄NO₃= 2/1 x moles O2 = 2/1 x 0.446 = 0.892 moles NH4NO3

Finally, we can use the molar mass of NH4NO3 to calculate the grams needed:

mass NH₄NO₃ = moles NH₄NO₃ x molar mass = 0.892 mol x 80.05 g/mol = 71.4 g

Therefore, 71.4 g of NH₄NO₃ are needed to produce 10.0 L of O₂.

Learn more about ideal gas law ,

https://brainly.com/question/28257995

#SPJ4

Answer:

First, we need to determine the molar ratio between magnesium (Mg) and silver (Ag) in the balanced chemical equation:

1 mol Mg : 2 mol Ag

This means that for every one mole of magnesium that reacts, two moles of silver are produced.

Next, we need to calculate the number of moles of silver that can be produced from 350 grams of silver:

mass of silver = 350 g

molar mass of silver = 107.87 g/mol

moles of silver = mass of silver / molar mass of silver

moles of silver = 350 g / 107.87 g/mol

moles of silver = 3.24 mol Ag

Now, we can use the mole ratio to determine the number of moles of magnesium required to produce 3.24 moles of silver:

1 mol Mg : 2 mol Ag

moles of Mg = moles of Ag / 2

moles of Mg = 3.24 mol Ag / 2

moles of Mg = 1.62 mol Mg

Finally, we can use the molar mass of magnesium to convert the number of moles to grams:

molar mass of Mg = 24.31 g/mol

mass of Mg = moles of Mg x molar mass of Mg

mass of Mg = 1.62 mol x 24.31 g/mol

mass of Mg = 39.3 g

Therefore, approximately 39.3 grams of magnesium are needed to produce 350 grams of silver.

Explanation:

Stoichiometry, which involves balancing the equation and using the molar mass of each substance, must be used to calculate how many grams of magnesium are required to make 350 grams of silver.

Firstly, balance the chemical equation:

Mg + 2AgNO₃ → Mg(NO₃)₂ + 2Ag

A mole of magnesium interacts with two moles of silver nitrate to form a mole of magnesium nitrate and two moles of silver, according to this equation. We can deduce from the balanced equation that the magnesium-to-silver ratio is 1:2.

Following that, we must determine the molar mass of silver:

Silver(Ag): 107.87g/mol

The requisite magnesium can then be calculated using the formula below:

Grams of Magnesium (Mg) = (molar mass of Ag x grams of Ag) / (2 x molar mass of Mg)

Grams of Magnesium (Mg) = (107.87 g/mol x 350 g) / (2 x 24.31 g/mol)

Grams of Magnesium (Mg) = 303.38 g

Thus, 350 grams of silver can be made from 303.38 grams of magnesium.

Learn about Stoichiometric Calculations:

https://brainly.com/question/29841194

The solubility of Zinc hydroxide, Zn(OH)₂, in water when dilute nitric acid is added to it will decrease. Option D

Zinc hydroxide is an insoluble salt that can dissolve in water to a certain extent. The solubility of Zn(OH)₂ in water is relatively low, but it can be increased by adding an acid. When dilute nitric acid is added toZn(OH)₂the acid will react with the hydroxide ions (OH-) in the salt to form water and a nitrate salt.

The reaction can be represented as follows:

Zn(OH)₂(s) + 2HNO₃(aq) → Zn(NO₃)₂(aq) + 2H₂O(l)

As a result of this reaction, the concentration of hydroxide ions in the solution decreases, which leads to a decrease in the solubility of Zn(OH)₂. Therefore, the correct answer is D, which states that the solubility of Zn(OH)₂ decreases when dilute nitric acid is added to it.

Learn more about  Zinc hydroxide,

https://brainly.com/question/28232373

#SPJ4

You carried out a qualitative test for this experiment to see if soap was produced particular with the characteristics/signal. To test soap purity/formation: dissolve soap in water, add saturated salt solution to precipitate impurities, observe clarity, and check pH (9-10) to confirm soap formation.

To test for the purity/formation of the desired soap product, you can follow these steps:

1. Prepare a saturated salt solution: Dissolve a sufficient amount of common salt (sodium chloride) in water until no more salt can dissolve, creating a saturated solution.

2. Take a small sample of your soap product and dissolve it in a separate container with a small amount of distilled water. Stir the solution thoroughly to ensure the soap has fully dissolved.

3. Add the saturated salt solution to the dissolved soap sample. The presence of the saturated salt solution will cause impurities and excess reactants to precipitate out, while the soap will remain in solution.

4. Observe the mixture for any changes in its appearance. A clear and transparent solution indicates the formation of a pure soap product. Conversely, cloudiness or precipitates indicate the presence of impurities or unreacted starting materials.

5. To confirm your results, you can perform additional tests such as a pH test. Soap generally has a pH value between 9 and 10. Using a pH indicator or pH meter, you can check the pH of the soap solution. A pH within the expected range supports the conclusion that the desired soap product has been formed.

By following these steps and observing the specific features/signals mentioned, you can determine the purity and formation of your soap product in a qualitative manner.

To know more about the qualitative test refer here :

https://brainly.com/question/5949851#

#SPJ11

Identify the emission and excitation spectra, look for the specific characteristics mentioned above. The excitation spectrum will be the one that most resembles absorbance, as it shows the wavelengths of light absorbed by the nanocrystals.

Based on your question, you are provided with the fluorescence emission and excitation spectra of lead-selenium nanocrystals. To identify each spectrum, keep in mind the following:
1. Emission spectrum: This represents the wavelengths of light emitted by the nanocrystals when they return to their ground state from an excited state. It is typically characterized by sharp, well-defined peaks at specific wavelengths.
2. Excitation spectrum: This represents the wavelengths of light that are effective in exciting the nanocrystals to a higher energy state. It usually exhibits broader peaks and may be less well-defined than the emission spectrum.
To identify the spectrum that most resembles absorbance, look for the excitation spectrum. This is because the excitation spectrum provides information about which wavelengths of light are being absorbed by the nanocrystals in order to be excited to a higher energy state.

In a fluorescence microscope, the emission filter has the function of selectively allowing light of a certain wavelength or range of wavelengths that correspond to the fluorescence emitted by the specimen to pass while blocking light of other wavelengths.

Learn more about microscope here

https://brainly.com/question/30320097

#SPJ11

(a) Capacitance between anodized aluminum struts and space is 4.34x[tex]10^-13 F.[/tex]

(b) Energy that could be dissipated by an arc discharge is 1.07x[tex]10^-6 J[/tex]

(c) Anodized aluminum coating should be at least 1.49 microns thick to avoid breakdown under an electric field strength of 105V/cm.

(a) The capacitance between the object and space can be calculated using the formula:

C = εA/d

where C is the capacitance, ε is the permittivity of free space, A is the area of one strut, and d is the separation distance between the object and space (assumed to be the Debye length).

The area of one strut is given by:

A = [tex]πr^2 = π(0.125 m)^2 = 0.0491 m^2[/tex]

The Debye length for a typical plasma in space is on the order of 1 meter. So, we have:

d = 1 m

Plugging in these values, we get:

C = εA/d = (8.85x[tex]10^-12 F/m[/tex])(0.0491 [tex]m^2[/tex])/(1 m) = 4.34x[tex]10^-13 F[/tex]

(b) The energy that could be dissipated by an arc discharge to space can be calculated using the formula:

E = [tex]1/2CV^2[/tex]

where E is the energy, C is the capacitance (which we calculated in part (a)), and V is the voltage difference between the object and space (which is 140 volts).

Plugging in these values, we get:

E = 1/2(4.34x[tex]10^-13 F[/tex])(140 [tex]V)^2[/tex] = 1.07x[tex]10^-6 J[/tex]

(c) The breakdown voltage for anodized aluminum depends on the thickness of the coating. A commonly used empirical formula for the breakdown voltage of anodized aluminum coatings is:

V_bd = 1.7[tex]t^-0.5[/tex]

where V_bd is the breakdown voltage in volts, and t is the thickness of the coating in microns.

Assuming a factor of safety of 2, we want the breakdown voltage to be at least twice the voltage at which the station floats (140 volts negative), or 280 volts.

Solving the formula above for t, we get:

t = [tex](1.7 / V_bd)^2[/tex]

Plugging in 280 volts for V_bd, we get:

t = [tex](1.7 / 280)^2[/tex] = 1.49 microns

Therefore, the anodized aluminum coating should be at least 1.49 microns thick to avoid breakdown at an electric field strength of 105V/cm, assuming a factor of safety of 2.

Learn more about capacitance

https://brainly.com/question/28445252

#SPJ4

The product obtained from the oxidation of cis-2-methyl cyclohexanol with NaOCl is 2-methyl cyclohexanone, along with sodium chloride and water as byproducts.

Oxidation is a chemical process that involves the loss of electrons or the gain of oxygen atoms by a substance. It is a fundamental concept in chemistry and plays a critical role in many chemical reactions. In oxidation, the oxidizing agent (often oxygen) accepts electrons from the reducing agent, which loses electrons. As a result of this transfer of electrons, the reducing agent is oxidized, and the oxidizing agent is reduced.

One of the most well-known examples of oxidation is rusting, in which iron reacts with oxygen to form iron oxide. Combustion reactions, such as the burning of fuels, also involve oxidation. Oxidation can be used in many industrial applications, such as in the production of chemicals, as well as in biological systems, such as the breakdown of food for energy.

To learn more about Oxidation visit here:

brainly.com/question/16976470

#SPJ4

To determine which of the following compounds has a linear molecular geometry, let's first understand what linear molecular geometry is. Linear molecular geometry occurs when a molecule's central atom is surrounded by two bonding pairs of electrons, creating a straight line with a bond angle of 180 degrees.

Now, let's analyze each compound:
i. GaI3: Gallium has three valence electrons and is bonded to three iodine atoms, each providing one electron. This forms a trigonal planar geometry with bond angles of 120 degrees, so it is not linear.
ii. SF4: Sulfur has six valence electrons and is bonded to four fluorine atoms, with one lone pair on the sulfur. This forms a see-saw geometry with bond angles deviating from 120 and 90 degrees, so it is not linear.
iii. NF3: Nitrogen has five valence electrons and is bonded to three fluorine atoms, with one lone pair on the nitrogen. This forms a trigonal pyramidal geometry with bond angles of around 107 degrees, so it is not linear.
iv. KrF2: Krypton has eight valence electrons and is bonded to two fluorine atoms, with three lone pairs on the krypton. This results in a linear molecular geometry with a bond angle of 180 degrees.
So, among the given compounds, KrF2 has a linear molecular geometry.

For more information on central atom see:

https://brainly.com/question/29422259

#SPJ11

Answer:

Low humidity can be found in different continents and climates but Nevada has the lowest humidity.

Explanation:

:)

The original volume that was occupied by the Fivonine gas is 318 mL.

According to the Boyle's law; as long as the temperature and volume of the gas remain constant, the law asserts that the pressure of a gas is inversely proportional to its volume, or that as volume falls, pressure increases, and vice versa.

We know that;

P1V1 = P2V2

Then;

P1 = 900 torr or 1.18 atm

P2 = 1.50 atm

V1 = ?

V2 = 250 mL

Then V1 = P2V2/P1

V1= 1.50 * 250/1.18

V1 = 318 mL

This is the original volume.

Learn more about Boyles's law:https://brainly.com/question/30367133

#SPJ1

This balloon would contain 0.399 moles of H atoms. This amount of H atoms may seem small, but it is significant in terms of chemical reactions and reactions that produce gas.

To determine the number of moles of H atoms in 2.0 grams of C2H6, we need to first calculate the molar mass of C2H6. The molar mass of C2H6 is 30.07 g/mol, which means that 2.0 grams of C2H6 is equivalent to

\frac{2.0}{30.07} = 0.0665 moles of C2H6.
C2H6 has a molecular formula that consists of two carbon atoms and six hydrogen atoms. Therefore, to find the number of moles of H atoms, we need to multiply the number of moles of C2H6 by the number of H atoms per molecule. In this case, there are 6 H atoms in one molecule of C2H6.
Thus, the number of moles of H atoms in 2.0 grams of C2H6 is:
0.0665 moles of C2H6 * 6 H atoms per molecule = 0.399 moles of H atoms.
To put it in perspective, imagine a balloon filled with 2.0 grams of C2H6.

learn more about molar mass Refer: https://brainly.com/question/14356143

#SPJ11

In a two solvent hexane-acetone gradient for an alumina HPLC column, acetone solvent is gradually increased.For a C18 column with water and methanol two solvents are used for gradient elution, methanol solvent is gradually increased in percentage.

a) In a two solvent hexane-acetone gradient for an alumina HPLC column, acetone is gradually increased. This is because hexane is a non-polar solvent, while acetone is more polar. Increasing the polarity of the mobile phase with acetone improves the separation of compounds on the alumina stationary phase, which is polar in nature.

b) For a C18 column with water and methanol as two solvents used for gradient elution, methanol percentage is gradually increased. The reason for this is that the C18 column consists of non-polar stationary phase, and water is polar while methanol is less polar. By increasing the percentage of methanol, the elution strength increases and compounds with varying polarities can be effectively separated on the non-polar C18 column.

Learn more about HPLC : https://brainly.com/question/30915499

#SPJ11

The equation that relates molarity to mass%, density of solution, and molar mass of solute is as follows:
Molarity = (mass% * density of solution * 10) / (molar mass of solute)

Molarity = (mass% * density of solution * 10) / (molar mass of solute)

Where mass% is the mass of the solute divided by the total mass of the solution, expressed as a percentage, and density of solution is the mass of the solution per unit volume (usually expressed in grams per liter). The factor of 10 is included to convert mass% from a percentage to a decimal fraction.

This equation can be derived from the definition of molarity, which is the number of moles of solute per liter of solution. By rearranging this equation, we can solve for the number of moles of solute:

moles of solute = Molarity * volume of solution

Next, we can substitute the definition of density of solution:

volume of solution = mass of solution / density of solution

We can also substitute the definition of mass%:

mass of solute = (mass% / 100) * mass of solution

Substituting these expressions into the equation for moles of solute, we get:

moles of solute = Molarity * (mass of solution / density of solution)

moles of solute = Molarity * [(mass% / 100) * mass of solution / density of solution]

Finally, we can use the definition of molar mass to express the mass of solute in terms of moles:

mass of solute = molar mass of solute * moles of solute

Substituting this expression into the equation for moles of solute, we get:

mass of solute = Molarity * [(mass% / 100) * mass of solution / density of solution] * molar mass of solute

Solving for Molarity, we get the equation shown at the beginning:

Molarity = (mass% * density of solution * 10) / (molar mass of solute)

To know more about molarity, refer to the link below:

https://brainly.com/question/16727614#

#SPJ11