Answer:
You'll need to hold down/click f11 and fn at the same time.
If not that, try ctrl + shift + f5.
I can guarantee the first works; not too sure about the second.
Explanation:
Well, it's hotkeys, so...
EDIT: The f5 command does nothing related to full screen, my bad.
Answer:
f11 should work just hold it down or restart your computer and try it again
Explanation:
Which are the 2 main elements that’s make up computer architecture?
Answer:
Explanation:
Computer architecture is made up of two main components the Instruction Set Architecture (ISA) and the RTL model for the CPU.
State the causes of the increase in carbondioxide
concerntration
Answer:
The right response is "fossil fuels".
Explanation:
Fossil fuels such as coal as well as oil conduct electricity that has already been photosynthesized by vegetation or plant species from the ecosystem for thousands of generations.Within only several hundred years we've returned fuel to that same ecosystem or environment, the sources of CO₂ rise are fossil fuels.However, the above solution is the right one.
Consider the following two data structures for storing several million words.
I. An array of words, not in any particular order
II. An array of words, sorted in alphabetical order
Which of the following statements most accurately describes the time needed for operations on these data structures?
A. Finding the first word in alphabetical order is faster in I than in II.
B. Inserting a word is faster in II than in I.
C. Finding a given word is faster in II than in I.
D. Finding the longest word is faster in II than in I.
Answer:
The correct answer is C.
Explanation:
Finding a given word requires the search operation. The search operation is faster in a sorted array compared to an unsorted array. In a sorted array the binary search method is used which runs on logarithmic time while in an unsorted array, there's no other way than linear search which takes O(n) time on the worst case where the required word is not in the array.
The statement which most accurately describes the time needed for operations on these data structures is: C. Finding a given word is faster in II than in I.
What is a binary search?Binary search can be defined as an efficient algorithm that is designed and developed for searching an element (information) from a sorted list of data, especially by using the run-time complexity of Ο(log n)
Note: n is the total number of elements.
In Computer science, Binary search typically applies the principles of divide and conquer. Thus, to perform a binary search on an array, the array must first be sorted in an alphabetical or ascending order.
In conclusion, the statement which most accurately describes the time needed for operations on these data structures is that, finding a given word is faster in data structure II than in I.
Read more on data structure here: https://brainly.com/question/24268720
Write a static generic method PairUtil.minmax that computes the minimum and maximum elements of an array of type T and returns a pair containing the minimum and maximum value. Require that the array elements implement the Measurable interface of Section 10.1.2.
Answer:
Explanation:
The following code is written in Java. It is hard to fully create the code without the rest of the needed code including the T class and the Measurable interface. Regardless the following code can be implemented if you have that code available.
public static T minmax(ArrayList<T> mylist) {
T min = new T();
T max = new T();
for (int x = 0; x < mylist.size(); x++) {
if (mylist.get(x) > max) {
max = mylist.get(x);
} else if (mylist.get(x) < min) {
min = mylist.get(x);
}
}
return (min, max);
}
What type of information is best suited for infographies?
Answer:
All varieties of information, from bullet pointed text to numerical tables
Explanation:
Answer:
All varieties of information, from bullet pointed text to numerical tables
Explanation:
palindrome is a string that reads the same forwards as backwards. Using only a xed number of stacks, and a xed number of int and char variables, write an algorithm to determine if a string is a palindrome. Assume that the string is read from standard input one character at a time. The algorithm should output true or false as appropriate
Solution :
check_palindrome[tex]$(string)$[/tex]
lower_[tex]$case$[/tex]_string[tex]$=$[/tex] string[tex]$. to$[/tex]_lower()
Let stack = new Stack()
Let queue = new Queue();
for each character c in lower_case_string:
stack.push(c);
queue.enqueue(c);
let isPalindrome = true;
while queue is not empty {
if (queue.remove().equals(stack.pop())) {
continue;
} else {
isPalindrome=false;
break while loop;
}
}
return isPalindrome
Input = aabb
output = true
input =abcd
output = false
Project Description:
In the following project, you will edit a worksheet that will be used to summarize the operations costs for the Public Works Department.
Instructions:
For the purpose of grading the project you are required to perform the following tasks:
Step Instructions Points Possible
1. Start Excel. Download and open the file named go16_xl_ch03_grader_3g_hw.xlsx. 0.000
2. In the Expenses worksheet, calculate row totals for each Expense item in the range F5:F9. Calculate column totals for each quarter and for the Annual Total in the range B10:F10. 8.000
3. In cell G5, construct a formula to calculate the Percent of Total by dividing the Annual Total for Salaries and Benefits by the Annual Total for Totals by Quarter. Use absolute cell references as necessary, format the result in Percent Style, and then Center. Fill the formula down through cell G9. 12.000
4. Use a 3-D Pie chart to chart the Annual Total for each item. Move the chart to a new sheet and then name the sheet Annual Expenses Chart. 8.000
5. For the Chart Title, type Summary of Annual Expenses and format the chart title using WordArt Style Fill - Blue, Accent 1, Shadow. Change the Chart Title font size to 28. 6.000
6. Remove the Legend from the chart and then add Data Labels formatted so that only the Category Name and Percentage display positioned in the Center. Change the Data Labels font size to 12, and apply Bold and Italic. 8.000
7. Format the Data Series using a 3-D Format effect. Change the Top bevel and Bottom bevel to Circle. Set the Top bevel Width and Height to 50 pt and then set the Bottom bevel Width and Height to 256 pt. Change the Material to the Standard Effect Metal.
Note, the bevel name may be Round, depending on the version of Office used. 4.000
8. Display the Series Options, and then set the Angle of first slice to 125 so that the Salaries and Benefits slice is in the front of the pie. Select the Salaries and Benefits slice, and then explode the slice 10%. Change the Fill Color of the Salaries and Benefits slice to a Solid fill using Green, Accent 6, Lighter 40%. 4.000
9. Format the Chart Area by applying a Gradient fill using the Preset gradients Light Gradient – Accent 4 (fourth column, first row). Format the Border of the Chart Area by adding a Solid line border using Gold, Accent 4 and a 5 pt Width. 6.000
10. Display the Page Setup dialog box, and then for this chart sheet, insert a custom footer in the left section with the file name. 4.000
Answer:
pelo o que diz na database é que você n é ser humano normal por perguntar isso!!
In order to implement the classic DoS flood attack, the attacker must generate a sufficiently large volume of packets to exceed the capacity of the link to the target organization. Consider an attack using ICMP echo request (ping) packets that are 500 bytes in size (ignoring framing overhead). How many of these packets per second must the attacker send to flood a target organization using a 0.5-Mbps link
Answer:
131 packets
Explanation:
Given
W (link ) =0.5 M bits, and Ping packets ( P ) = 500bytes
To flood a target organization that has a bandwidth of W bits using a packet Mbits, you will require a W / P packet
P ( required ) = 500 * 8 = 4000 bits
therefore the W /P packet is calculated as
= 0.5 M bits / 4000 bits
given that : 1 M bits = 1,048,576 bits
0.5 M bits / 4000 bits= 131.07
hence approximately 131 packets/ sec is required to flood the target organization
What are the vertical areas of the spreadsheet?
a
Verticies
b
Ventricals
c
Columns
d
Rows
Answer:
Columns
Explanation:
A spreadsheet may a explained as a tabular arrangement or arrays of cells which allows users to enter both numeric and string data for storage, manipulation and analysis. The spreadsheet program has both the vertical and horizontal cell arrangement with the vertical areas being reffered to as THE COLUMN which are labeled using alphabets arranged from A - AZ, AA - AZ, and so on to make up a total of 16384 columns on the Microsoft Excel spreadsheet program. Cells are located using a combination of column and row address. With row representing the horizontal area of the spreadsheet and labeled with digits. Therefore cells are usually refereed to as A1, (column A row 1) and so on.
If D3=30 and D4=20, what is the result of the function
=IF(D4 D3, D3-D4, "FULL")?
0-10
O Unknown
O 10
O Full
Answer:
c. 10
Explanation:
Given
[tex]D3 = 30[/tex]
[tex]D4 = 20[/tex]
Required
The result of: [tex]=IF(D4 < D3,D3-D4,"FULL")[/tex]
First, the condition D4 < D3 is tested.
[tex]D4 < D3 = 20 < 30[/tex]
Since 20 < 30, then:
[tex]D4 < D3 = True[/tex]
The condition is true, so:
D3 - D4 will be executed.
[tex]D3 - D4 = 30 - 20[/tex]
[tex]D3 - D4 = 10[/tex]
Hence, the result of the function is 10
You are the IT administrator for a small corporate network. You have just changed the SATA hard disk in the workstation in the Executive Office. Now you need to edit the boot order to make it consistent with office standards. In this lab, your task is to configure the system to boot using devices in the following order: Internal HDD. CD/DVD/CD-RW drive. Onboard NIC. USB storage device. Disable booting from the diskette drive.
Answer:
this exercise doesn't make sense since I'm in IT
Explanation:
Write a function, AvgList, that takes a single argument, a list, and returns the average (mean) of the numbers in the list. You may assume that all elements of the list are numeric (int or float), and that the list has at least one element. Hints: Use the function SumList that you wrote above. Use the built-in function len to get the number of elements in the list.
Answer:
Answered below
Explanation:
//Programmed in Java
public double avgList(int [] nums){
int I;
double sumOfNumbers = 0;
double averageOfNumbers = 0;
//Loop over to sum all elements in the list.
for(I = 0; I < nums.length; I++){
sumOfNumbers += nums[I];
}
//Calculate the average
averageOfNumbers = sumOfNumbers/ nums.length;
return averageOfNumbers;
}
Suppose Alice downloads a buggy browser that implements TLS incorrectly. The TLS specification says that, during the handshake, the browser should send a random 256-bit number RB. Instead of picking RB randomly the browser always sends all zeros. Describe an attack that is possible against this buggy browser and how to update the browser so that this attack is no longer feasible.
Solution :
It is given that Alice downloads the buggy browser which implements a TLS incorrectly. The specification of a TLS states that during a handshake, the browser sends a 256 bit number of RB randomly.
So in this case, a man-n-the-middle attack is possible. It can compromise the confidentiality of Alice. Updating the browser by visiting the website and checking its latest version of the browser or installing some other browser which has a more trust in the market for its security features.
discuss file Management
With relevant examples.
in a Computer?
Answer:
File management is the process of administering a system that correctly handles digital data. Therefore, an effective file management system improves the overall function of a business workflow. It also organizes important data and provides a searchable database for quick retrieval
(3) reasons why users attach speakers to their computer
Explanation
1.we connected speakers with computers for listening voices or sound . because the computer has not their own speaker.
2.Speakers are popular output devices used with computer systems.
3.Speakers are one of the most common output devices used with computer systems
What are
the rules for giving
variable name ?
Answer:
Rules for naming variables:
- Variable names in Visual C++ can range from 1 to 255 characters. To make variable names portable to other environments stay within a 1 to 31 character range.
- All variable names must begin with a letter of the alphabet or an underscore ( _ ). For beginning programmers, it may be easier to begin all variable names with a letter of the alphabet.
- After the first initial letter, variable names can also contain letters and numbers. No spaces or special characters, however, are allowed.
- Uppercase characters are distinct from lowercase characters. Using all uppercase letters is used primarily to identify constant variables.
- You cannot use a C++ keyword (reserved word) as a variable name.
Explain why microcomputers are installed with TCP/IP protocols?
Answer:
microcomputers are installed with TCP/IP protocols because its a set of standardized rule that allows the computer to communicate on a network such as the internet
how do i remove my search history?
Step 1: Go to PC settings from the Start Menu or Desktop. Step 2: In PC settings, choose Search in the menu, and click Delete history.
Take a number N as input and output the sum of all numbers from 1 to N (including N).
Answer:
Incluint respuet
Explanation:
espero que te sirva
Write a recursive method called sumTo that accepts an integer parameter n and returns a real number representing the sum of the first n reciprocals. In other words, sumTo(n) returns (1 1/2 1/3 1/4 ... 1/n). For example, sumTo(2) should return 1.5. The method should return 0.0 if it is passed the value 0 and throw an IllegalArgumentException if it is passed a value less than 0.
Answer:
Sorry mate I tried it was wrong
Explanation:
Sorry again
6
Suppose the following formula is inputted into Excel:
=MROUND(1/4,100)
The output in the cell will be:
0
0.25
0.2500
1
Answer:
the output in the cell will be 0,2500
Which of the following will display a string whose address is in the dx register: a.
mov ah, 9h
int 21h
b.
mov ah, 9h
int 22h
c.
mov ah, 0h
int 21h
d.
None of these
e.
mov ah, 2h
int 20h
Answer:
a)
Explanation:
Function 9 of interrupt 21h is display string.
Me Completan Pliiiis
Answer:
its in Spanish most people cant read Spanish
Explanation:
Which option would allow you to watch an HD video, without delays in playback, on a computer with a Mac OS and a connection that has a lower bit rate? MPG QuickTime H.264 Flash Player
Answer:
H.264
Explanation:
A file type can be defined as the standard used to store digital data such as pictures, texts, videos, and audios. They all have unique file extension which determines the type of software program (application) to be used for opening a particular file and accessing its data e.g pictures (jpeg, png), texts (txt, docx, rtf), audios (mp3, acc), and videos (mp4, 3gp, avi, h.264, mkv).
Sometimes, computer users make the mistake of opening files with the wrong software application or program, this often leads to an error due to the incompatibility of the software application with the particular file.
H.265 is a high efficiency video codec (HEVC) and it's a standard video compression codec designed and developed to offer a better data compression, as an upgrade to the advanced video coding (AVC) standard.
Hence, the option or file extension (format) which would allow you to watch a high definition (HD) video, without delays in playback, on a computer with a Mac operating system (OS) and a connection that has a lower bit rate is the H.264 format.
Can two computers be assigned to one IP address
Answer:
two computers cannot have the same public (external) IP address unless they are connected via the same router. If they are connected via the same router, then they can have (share) the same public IP address yet have different private (local) IP addresses
Explanation:
Answer: maybe
Explanations: two computers cannot have the same public (external) IP address unless they are connected via the same router. If they are connected via the same router, then they can have (share) the same public IP address yet have different private (local) IP addresses.
What should a valid website have?
Select one:
a. Cited sources, copyright, and a clear purpose
b. Cited sources, copyright, and a poor design
c. Cited sources, copyright, and colorful images
d. Cited sources, no copyright, and a broad purpose
Answer:
A. cites sources,copyright,and a clear purpose
What yields 2.5? Type casting
Answer:
5.0/2
Explanation:
I don't do Java, but I do Python. I'm pretty sure the answer to this question is 5.0/2. I'm sorry if I'm wrong.
You are going to visit a national park, and have never been there before. You are using a map to try and make the distance travelled as short as possible. There are 5 intermediate towns, A, B, C, D, and E, you may gln your way to the park, and the distances between the various locations are given below.
Answer:
eggs fishing didn't ysjffj
In a multimedia presentation, when might voice-over be a better choice than placing the text on the screen?
when you have very little to say
when your audience is bored
when you have a lot to say
when you don’t want to write
In a multimedia presentation, the option that might be the voice-over when you have a lot to say.
What is multimedia presentation?A multimedia presentation is known to be a presentation where a person is said to often stand by themselves to present information via slides, video, etc.
In a multimedia presentation, the option that might be in the case of voice-over is when you have a lot to say as it is better to put it in a video format.
Learn more about multimedia from
https://brainly.com/question/24138353
#SPJ2
what is digital literacy? describe three examples of digital literacy skills
Digital literacy means having the skills you need to live, learn, and work in a society where communication and access to information is increasingly through digital technologies like internet platforms, social media, and mobile device
Examples of Digital Literacy skills:
What is digital literacy?
ICT proficiency.
Information literacy.
Digital scholarship.
Communications and collaborations.
Digital learning.
Digital identity.