Answer:
True
Explanation:
A complex arrangement of pulleys forms what is called the block in a block and tackle. The rope used to lift the pulleys and the load is the tackle. A block and tackle is used to lift a truck engine, which has a weight and output force of nearly 8000 N. The input force required to lift this weight using the block and tackle is 400N. What is the mechanical advantage of the block and tackle?
Answer:
Mechanical advantage = 20
Explanation:
Given:
Output force = 8,000 N
Input force = 400 N
Find:
Mechanical advantage
Computation:
Mechanical advantage = Output force / Input force
Mechanical advantage = 8,000 / 400
Mechanical advantage = 20
1. Explain how this picture is an example of kinetic energy.
2. What factors affect the energy of the ball?
3. What change could be made to give the ball more energy?
Answer:
1. when in motion(moving) it is Kinetic energy
2. it is kinetic when moving and potential when at rest
3. by constantly kicking or moving the ball
Explanation:
Calculate the acceleration of gravity that the moon has, if an astronaut has a mass of 87 kg and the weight force he experiences on the moon is 141 N
Answer:
the acceleration of gravity is 1.62
Explanation:
w=mg
141=87g
141/87=87g/87
1.62=g
What made "Lunar Orbit Rendezvous" such an attractive method to get to the Moon that it was selected by NASA in July, 1962
Answer:
I don't know the answer
State one way to decrease the moment of a given force about a given axis of rotation.
Answer:
The moment of a given force about a given axis of rotation can be decreased by decreasing the perpendicular distance of force from the axis of rotation.
Answer:
hope it helps...
Explanation:
The moment of a given force about a given axis of rotation can be decreased by decreasing the perpendicular distance of force from the axis of rotation.
10. Scientists created models that show a rocky asteroid crashing into a moon (less mass) a
planet (more mass). In both crashes, the asteroid was the same mass. Scientists want to kno
happened to the asteroid. Use the information in the diagram to answer.
In which crash did the asteroid experience a stronger force? How do you know?
a
Crash 2; the force on the planet was stronger in this crash, so the force on the astero
also stronger.
There was no force on the asteroid. Only the moon and planet experienced a force in
Answer:
The diagram doesn’t tell you anything about the force on the asteroid. It only gives information about the force on the planet and the moon.
Explanation:
PLSSSS HELPPP What effects do mutations have? Check all that apply.
A) could change protein shape
B)never change protein shape
C)might be neutral
D)always change the way a trait is observed
E)might be harmful
F)might be beneficial
Answer:
E, F, A, C
Explanation:
They cannot change the way a trait is observed
Mutations could change protein shape(A), could cause genetic disorders and harm you(E), could actually be beneficial and cause adaptations to your environment(F), or they could be neutral in which no changes are observantly notable(C).
Hope this helps
Use the following v-t graph to answer the next questions
5
B
Velocity )
neters/second(s)
4
A
3
2
1
Time (1)
0
1
2
3
4
5
2
8
10
11
12
13
1015
16
second(s)
.1
D
-2
C С
3
5
Answer:
mag aral ka bubu
Explanation:
ang tanga mu hahahahhaha luko nandyan lang naman yan hahahhahahahahahahhahahahahahahahhahahahahahaahahahahahahahhahahahahahahahahahahahahaahhahahaahahhaahha09561782
The total mechanical energy of a system is 950 J and the gravitational potential energy is 350 J. What is the kinetic energy?
Answer:
The kinetic energy is 600 J
Explanation:
Mechanical Energy
The principle of the conservation of mechanical energy states that the total mechanical energy in a system remains constant as long as the only forces acting are conservative forces.
The mechanical energy is defined as the sum of the potential plus kinetic energies:
E = U + K
Where E is the total mechanical energy, U is the gravitational potential energy and K is the kinetic energy.
Solving for K:
K = E - U
The system described has a total mechanical energy of E=950 J and gravitational potential energy of U=350 J, thus:
K = 950 J - 350 J
K = 600 J
The kinetic energy is 600 J
At a picnic, there is a contest in which hoses are used to shoot water at a beach ball from three different directions. As a result, three forces act on the ball, F1, F2, and F3. The magnitudes of F1 and F2 are F1=50.0N and F2=90.0N. F1 acts under the angle of 60degrees with respect to the x axis and F2 is directed along the x-axis. Find the magnitude and direction of F3 such that the resultant force acting on the ball is zero.
Answer:
F₃ = 122.88 N
θ₃ = 20.63°
Explanation:
First we find the components of F₁:
For x-component:
F₁ₓ = F₁ Cos θ₁
F₁ₓ = (50 N) Cos 60°
F₁ₓ = 25 N
For y-component:
F₁y = F₁ Sin θ₁
F₁y = (50 N) Sin 60°
F₁y = 43.3 N
Now, for F₂. As, F₂ acts along x-axis. Therefore, its y-component will be zero and its x-xomponent will be equal to the magnitude of force itself:
F₂ₓ = F₂ = 90 N
F₂y = 0 N
Now, for the resultant force on ball to be zero, the sum of x-components of the forces and the sum of the y-component of the forces must also be equal to zero:
F₁ₓ + F₂ₓ + F₃ₓ = 0 N
25 N + 90 N + F₃ₓ = 0 N
F₃ₓ = - 115 N
for y-components:
F₁y + F₂y + F₃y = 0 N
43.3 N + 0 N + F₃y = 0 N
F₃y = - 43.3 N
Now, the magnitude of F₃ can be found as:
F₃ = √F₃ₓ² + F₃y²
F₃ = √[(- 115 N)² + (- 43.3 N)²]
F₃ = 122.88 N
and the direction is given as:
θ₃ = tan⁻¹(F₃y/F₃ₓ) = tan⁻¹(-43.3 N/-115 N)
θ₃ = 20.63°
help me pleaseeeee
Answer:
Explanation:
Frequency, in physics, the number of waves that pass a fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion...............
You are a medical student who has been instructed to make a transverse Cut through the abdomen.Calling through the abdomen in which direction will accomplish your goal
how can we calculate acceleration in motion which is not uniform or uniformly accelerated please help tell me another formula to calculate acceleration
Answer:
These are some of the ones I found or know of.
Explanation:
F=ma
A= v-u/t
A= v^2/r
Susie Small finds she weighs 300 N.
Calculate her mass.
Answer:
30Kg
Explanation:
Weight = mass x gravitational field strength
300 = mass x 10
mass = 30kg
gravitational field strength is 9.8 on earth but normally we take it to be 10 for easy reference and calculations
The mass will be "30 kg". A further solution is provided below.
According to the question,
Weight,
300 NWe know that,
Gravitational field strength,
10The mass will be:
→ [tex]Weight = Mass\times Gravitational \ field \ strength[/tex]
or,
→ [tex]Mass = \frac{Weight}{Gravitational \ field \ strength}[/tex]
By putting the values, we get
→ [tex]= \frac{300}{10}[/tex]
→ [tex]= 30 \ kg[/tex]
Thus the above solution is right.
Learn more about mass here:
https://brainly.com/question/20353971
Help plz will give brainliest
Answer:
The forces acting on the root beer is the ice cream. This means that the 'air' in the ice cream keeps it at the top of the root beer enabling it to float right at the top.
1. The unit of power is called a derived unit, why?
Answer:
Because its depends upon fundamental units and formed by combination of two or more fundamental units.
plz help i really need this
Answer:
The reactivity of metals increases as you move left in a period and as you move down in a group, so Marie needs to know the period and group of the element inside each box. Boxes that show locations in groups 1 or 2 or in period 8 contain the most reactive elements.
Explanation:
Answer:
The Group Number of the elements.
Explanation:
If Marie knew the group number of the elements, then she could determine the amount of valence electrons each element has and their reactivity rate. For example, if one box tells her that an element is located in group 18, then she could determine that the element is not very reactive. This is because elements in group 18 have 8 valence electrons, which makes them stable/unreactive.
Hope this helps!
if the net force of 15 N is exerted on an encyclopedia to cause it to accelerate at a rate of 5 m/s2. what is the mass of the encyclopedia
Answer:
3 kg
Explanation:
F = ma
(15) = m(5)
m = 3 kg
Balanced Forces acting on an object will not change the object's motion. Unbalanced Forces acting on an object will change the change the object's motion.
Answer:
TRUE
Explanation:
The answer is true.
Balance forces acting on a body will not change the motion of the body because the body experiences no net resultant force in one direction. When any body experiences equal forces with opposite directions, the net force or the resultant force experience by the body is zero.
In case of an unbalanced forces, there is a net force acting in one direction and so it causes the body to change in its state of motion in the direction of the net force.
If you walk 6mph how far would you get in 10 seconds?
Answer:
0.017
Explanation:
6÷3600×10=
6÷360=0.00166666666
=0.017(rounded)
Answer:
The answer is 1 mile in 10 minutes
if a gas produced, most likely a ______ reaction took place
Answer:
if a gas produced, most likely a chemical reaction took place
Explanation:
Answer:
if a gas produced, most likely a Chemical reaction took place
Explanation:
hope this helps and have a good day <3
When does an object reach its terminal velocity?
Answer: Terminal velocity is achieved, therefore, when the speed of a moving object is no longer increasing or decreasing; the object's acceleration (or deceleration) is zero.
Explanation:.
Answer: Terminal velocity is achieved, therefore, when the speed of a moving object is no longer increasing or decreasing; the object's acceleration (or deceleration) is zero.
As others have said, 8 seconds to get to 90% of terminal velocity. But if you're falling from outer space, you could reach speeds much higher than terminal velocity, and slow down when you reach the atmosphere. If coming in from a long distance, you'll burn up like a meteorite.
Explanation:
A skier rides horizontally off of a 200 meter high cliff. If he lands 25 meters away from the base of the cliff, how fast was he skiing as he went off the edge?
A. 0.91 m/s
B. 2.91 m/s
C. 3.91 m/s
D. 25.91 m/s
Answer:
the answers, the correct one is C, v₀ₓ = vₓ = 3.91 m / s
Explanation:
This is a projectile launching exercise, in this case they indicate that when leaving the cliff it goes horizontally, therefore the initial vertical speed is zero, let's find the time to reach the base
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
at the base the height is zero (y = 0 m)
0 = y₀ + 0 - ½ g t²
t = √ (2y₀ / g)
we calculate
t = √ (2 200 / 9.8)
t = 6.389 s
with this time we calculate the horizontal speed
v₀ₓ = x / t
v₀ₓx = 25 / 6,389
v₀ₓ = vₓ = 3.91 m / s
When checking the answers, the correct one is C
Can two spheres of different diameters and different
masses have the same moment of inertia?
Answer:
NO
Explanation:
I=mr^2 this means moment inertia depends upon mass and square of radius or distance.
By using electroscope, if the body is negatively charged then due to electrostatic induction, then on the leaves there will be appear:
(a) both positive and negative charges
(b) negative charge
(c) positive charge
(d) no charge
(b) negative charge
This is the answer
18) Why do you think divergent plate boundaries and transform fault boundaries only occur at places where the crust is the same on both plates?
Answer:
A divergent boundary occurs when two tectonic plates move away from each other. Along these boundaries, earthquakes are common and magma (molten rock) rises from the Earth's mantle to the surface, solidifying to create new oceanic crust. When two plates come together, it is known as a convergent boundary.
Explanation:
In a container of negligible mass, 0.0400 kg of steam at 100∘C100 ∘ C and atmospheric pressure is added to 0.200 kg of water at 50.0∘C50.0 ∘ C.
(a) If no heat is lost to the surroundings, what is the final temperature of the system?
(b) At the final temperature, how many kilograms are there of steam and how many of liquid water?
If no heat is lost to the surroundings, the final temperature of the system is 100 C°, At the final temperature, 0.0214 kg and 0.219 kg kilograms are there of steam and how many of liquid water
What is heat ?heat can be defined as the form of energy that is spontaneously transferred from one object to another object as the differences in temperatures is otherwise called as heat transfer.
The Heat transfer occurs upto the equilibrium point of an object has been reached.
Internal Energy is the total amount of energy of all the molecules of a body is the internal energy within the object.
Specific Heat or heat capacity, is the amount of energy required to produce a unit change in its temperature.
For more details heat, visit
brainly.com/question/13411214
#SPJ5
A cow standing atop a building in Times Square recalled a funny joke and began to laugh. The uncontrollable laughter caused the cow to fall over the side of the building. He fell for a time period of 3.5 s and landed in a bed of bushes. How fast was the cow moo-ving when he reached the bushes?
Which equation should be used to solve the problem?
Answer:
Vf = 34.3 m/s
1st equation of motion was used to solve.
Explanation:
In order to find the final speed of the cow, when it hits the bushes, we can use first equation of motion:
Vf = Vi + gt
where,
Vf = Final Velocity of Cow = ?
Vi = Initial Velocity of Cow = 0 m/s
g = acceleration due to gravity = 9.8 m/s²
t = time taken = 3.5 s
Therefore,
Vf = 0 m/s + (9.8 m/s²)(3.5 s)
Vf = 34.3 m/s
1st equation of motion was used to solve.
Refinery EM can produce 22 gallons of gasoline or 18 gallons of flight fuel per barrel of crude oil. Refinery CG can produce 18 gallons of gasoline or 16 gallons of flight fuel per barrel of crude oil. Does OUTPUT vary or does INPUT vary in this problem?
Answer:
Output varies
Explanation:
Here the outputs of gallons of gasoline and flight fuel is mentioned of two refineries namely Refinery EM and Refinery CG. The output has been mentioned with respect to one barrel of crude oil. So, one barrel of crude is used by both the refineries.
So, here the output (gallons of gasoline and flight fuel) varies while the input (one barrel of crude oil) remains constant.
(NEED HELP ASAP)
In a lab investigation one group of students (group a) measures the speed of a 0.1 toy car to be 2.5 m/s at the bottom of a ramp another group of students (group b) measures the speed of the car to be 3 m/s at the bottom of the ramp the cars starting position at the top of the ramp is 1 m high.
a. what is the potential energy of the car at the beginning of the experiment before it's speed is measured?
b. Calculate the kinetic energy of the car for group a.
C. Calculate the kinetic energy for the car for group b.
Answer:
a = 0.98J
Explanation:
PE = mgh
PE = 0.1 x 9.8 x 1
PE = 0.98J
(a) The potential energy of the car at the beginning of the experiment is 9.8(m) J.
(b) The kinetic energy of the car for group a is 3.125(m) J.
(c) The kinetic energy of the car for group b is 4.5(m) J.
Potential energy of the car at the beginning of the experimentThe potential energy of the car is calculated as follows;
P.E = mgh
where;
m is mass of the carg is accleration due to gravityh is height of the carP.E = m x 9.8 x 1
P.E = 9.8(m) J
Kinetic energy of the car for group aK.E = ¹/₂mv²
K.E = ¹/₂ x m x (2.5)²
K.E = 3.125(m) J
Kinetic energy of the car for group bK.E = ¹/₂mv²
K.E = ¹/₂ x m x (3)²
K.E = 4.5(m) J
Learn more about kinetic energy here:https://brainly.com/question/25959744
#SPJ2