The variables for this experiment include mass, volume and the materials in the various balls, as well as their
densities. In Part II, you will be comparing an inflated football with a deflated one. Use the drop-down menus to
complete the sentences and identify the independent and dependent variables.

The thickness of a sheet of aluminum (al) foil is t = 0.015 mm.

The definition of density is the mass of a material per unit of volume. The Latin letter D may also be used, however the sign is most usually employed to denote density. The mathematical definition of density is mass divided by volume.

row = m/V

where is the density, m is the mass, and V is the volume.

The connection between a substance's mass and the amount of space it occupies is known as its density (volume). The density of a substance is determined by the mass, size, and arrangement of its atoms. Density (D) is defined as the product of a substance's mass and volume.

V = mass/ Density

V = 3.736/2.699

V = 1.3842 cm³

area = 1.00 ft²

as we know,

1ft = (0.305m)²

    = 0.093m²

   = 0.093 * 10⁶ mm²

so, the thickness will be,

t = 1384.2/ 0.093 * 10⁶ mm²

to learn more about density go to -

https://brainly.com/question/1354972

#SPJ4

The value of Ka is 2.25 × 10⁻³.

A dissociation constant is a particular kind of equilibrium constant used in chemistry, biochemistry, and pharmacology to measure an object's propensity to break down into its component parts, such as when a complex disintegrates into its component molecules or a salt disintegrates into its component ions.

K is a constant that depends on the equilibrium between ions and non-ionized molecules in a solution or liquid. – also known as the dissociation constant.

to learn more about ionization constant go to -

https://brainly.com/question/1580755

#SPJ4

Answer:

it keeps the heat in and the bugs and flys out

Explanation:

The  initial and final pressures are 9 bar and 5 bar and work transfer is 12.5916 kJ.

To find initial and final pressure, we will keep the value of initial and final volume in the given formula.

For the case of initial pressure -

p = AV⁻¹+B

p = (0.06÷0.01)+3

p = 6+3

p = 9 bar

For the case of final pressure -

p = (0.06÷0.03)+3

p = 2+3

p = 5 bar

Now, calculating the work transfer -

The formula to be used here is -

[tex]W = \int\limits^1_2 {p} \, dV[/tex]

Keep the values in formula to find the value of work transfer -

W = [tex]\int\limits^2_1 {(\frac{0.06}{V} +3)} \, dV[/tex]

W = 0.06 (ln 0.03÷0.01)+3(0.03-0.01)

On solving the integration we get -

W = 12.5916 kJ

Hence, the initial and final pressures are 9 bar and 5 bar and work transfer is 12.5916 kJ.

Learn more about work -

https://brainly.com/question/8119756

#SPJ4

The complete question is -

Oxygen (O₂) gas within a piston-cylinder assembly undergoes an expansion from a volume V₁ = 0.01 m³ to a volume V₂ = 0.03 m³. The relationship between pressure and volume during the process is p = AV⁻¹+B, where A = 0.06 bar-m³ and B = 3.0 bar. For the O₂, determine the following:

(a) the initial and final pressures, each in bar

(b) the work, in kJ

It is possible to eat acidic things without changing your blood pH because the body contain buffers which help to neutralize acids; option A.

Buffers are solutions which resist changes in their pH when small amounts of acid or base are added to it.

Buffers are prepared from a mixture of a weak acid and its salt or a weak base and it salt.

Buffers act by neutralizing acids or bases to form water.

In the body, there are natural buffers which help to keep the pH of the blood fairly constant.

The buffers found in the body include:

When acidic substance are taken into the body, the buffer system of the body acts to neutralize the acid to form water. Similarly, when basic food substances are taken into the body, the buffer systems in the body neutralize the bases to from water.

Learn more about buffer systems at: https://brainly.com/question/11033169

#SPJ1

The best reducing agent is Na2S.

A chemical species known as a reducing agent in chemistry "donates" an electron to an electron acceptor. The Earth metals, formic acid, oxalic acid, and sulfite compounds are a few examples of chemicals that are frequently used as reducing agents.

A material that induces oxidation by receiving electrons becomes reduced when it acts as an oxidising agent. A chemical that reduces something by gaining electrons is said to be an oxidising agent. There are examples of how to recognise oxidising and reducing agents.

to learn more about reducing agents go to -

https://brainly.com/question/18697902

#SPJ4

pH of the buffer solution is 1.76.

Chemical dissociation of formic acid in the water:

HCOOH(aq) ⇄ HCOO⁻(aq) + H⁺(aq)

The solution of formic acid and formate ions is a buffer.

[HCOO⁻] = 0.015 M; equilibrium concentration of formate ions

[HCOOH] + [HCOO⁻] = 1.45 M; sum of concentration of formic acid and formate

[HCOOH] = 1.45 M - 0.015 M

[HCOOH] = 1.435 M; equilibrium concentration of formic acid

pKa = -logKa

pKa = -log 1.8×10⁻⁴ M

pKa = 3.74

Henderson–Hasselbalch equation: pH = pKa + log(cs/ck)

pH = 3.74 + log (0.015 M/1.435 M)

pH = 3.74 - 1.98

pH = 1.76

More about buffer: brainly.com/question/4177791

#SPJ4

boiling malt kinling are two of the most energy-demanding operations in the malthouse and brewery.

What is malthouse and brewery?

A facility where cereal grain is turned into malt by soaking it in water, allowing it to sprout, and then drying it to inhibit further growth is known as a malt house, malt barn, or maltings. The malt is utilised in the production of beer, whisky, and some meals. During the 20th century, traditional malt houses were mainly replaced by more automated production. A music hall has been made of many former malt houses, including Snape Maltings in England.

Approximately 60% of the primary energy consumed by the malt beverage sector is made up of natural gas and coal (Energy Information Administration (EIA), 1997; National Petroleum Council (NPC), 2003). These fuels are typically utilised as inputs into boilers to provide steam for different processes and for the generation of on-site electricity.

One of the most energy-intensive processes in the malthouse and brewery is the boiling of malt kinling.

To learn more about malthouse and brewery from the given link below,

https://brainly.com/question/24260420

#SPJ4

There is one orbital in an s subshell with 2 electrons, three orbitals in a psubshell with 2 electrons each, and 5 orbitals in a dsubshell with 2 electrons each. The total no. of electrons is 18 (maximum).

This means the individual orbital where n = 3, l = 2 will be '3d' because 3d orbitals have five subshells and the principal quantum number is 3. - We understand that a 3d orbital can adjust 10 electrons (each subshell can house two electrons). - Therefore the no. of electrons are n = 3, l = 2 are 10.

To learn more about principal quantum numbers visit the link

https://brainly.com/question/13312003

#SPJ4

If the total volume is 85ml, then the mass of the solid is 59.15g.

Given:

Total volume = 85ml

Liquid solvent mass = 44.3g

Liquid solvent density = 0.865g/ml

Density of solid = 1.75 g/ml

Density = Mas / Volume

   0.865 = 44.3 / Volume

Volume = 44.3 / 0.865

Volume =  51.2

Volume of solid = 85 - 51.2

                        = 33.8

Density = Mass / Volume

     1.75 = Mass / 33.8

   Mass = 59.15

What is mass?

A physical body's mass is the total amount of matter it contains. Inertia, or the body's resistance to acceleration when a net force is applied, is another property that may be measured. The gravitational pull of an object to other bodies is also influenced by its mass. The kilogram serves as the primary mass unit in the SI.

To learn more about Mass click the givenl ink

https://brainly.com/question/3187640

#SPJ4

The energy of the photon is the exact energy that is lost by the electron moving to its lower energy level. When the electron changes from n=3 or above to n=2, the photons emitted fall in the Visible Light region of the spectra. We call these lines Balmer's Series.

The average atomic mass of silver is 107.8682 amu. The fractional abundance of the lighter of the two isotopes is 0.5185.

The metal has always been in perfect plenty. Both heavier and lighter particles have a combined abundance of 1.

Assume that a is the heavier particle's abundance.

The lighter particle will have an abundance of = 1-a.

Calculations for the element's atomic mass with isotopes go like this:

Average atomic mass equals the sum of the abundance of isotope 1 and isotope 2 masses.

107.8682 amu is the specified average atomic mass.

Lighter isotope 1 has a mass of 106.90509 amu.

The heavier isotope has a mass of 108.9047 amu.

putting the values :

107.8682 = 106.90509 (1 - a) + 108.9047a

107.8682 =  106.90509 - 106.90509a + 108.9047a

107.8682 -  106.90509 = 1.99961a

0.96311 = 1.99961a

a = 0.48

Thus, 0.48 is the heavier particle abundance.

Lighter particle abundance = 1 - a

The density of lighter particles is equal to 1 - 0.48.

Lighter particle abundance = 0.518

The lighter particle has a percent abundance of 51.8%.

The lighter of the two isotopes has a fractional abundance of 0.5185.

Question:

Silver has two naturally occurring isotopes with the following isotopic masses: 10747Ag 10947Ag 106.90509 108.9047 The average atomic mass of silver is 107.8682 amu. The fractional abundance of the lighter of the two isotopes is ________. Silver has two naturally occurring isotopes with the following isotopic masses: Ag Ag 106.90509 108.9047 The average atomic mass of silver is 107.8682 amu. The fractional abundance of the lighter of the two isotopes is ________. 0.24221 0.48168 0.75783 0.90474 0.51835

To learn more about isotopes  click on the link below:

https://brainly.com/question/364529

#SPJ4

Lipids the compound present in food with formula C₄₄h₈₆O₈NP

The compound with a formula C₄₄H₈₆O₈NP is understood as phosphatidylethanolamine. it's the second most abudant phospholipid in animal and plant lipid, after phosphotidylcholine. It is present in many foods. Also a main lipid component of microbial membranes. it's found in all living cells and compose of 25% of all phospholipids.

What is the role of lipids in food?

They are important in the diet as energy sources and as sources of essential fatty acids and fat-soluble vitamins, which tend to accompany fats. They also contribute satiety, flavor, and palatability to the diet.Dietary lipids are primarily oils (liquid) and fats (solid). Commonly consumed oils are canola, corn, olive, peanut, safflower, soy, and sunflower-seed oil . Foods rich in oils include dressing , olives, avocados, spread , nuts, seeds, and a few fish. Fats are found in animal meat, dairy products, and cocoa butter

Learn more about lipids in food :

brainly.com/question/699715

#SPJ4

From highest to lowest according to the percentages of greenhouse gases they emit.

What are greenhouse gases?

The main greenhouse gases in Earth's atmosphere are water vapour (H2O), carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and ozone. A greenhouse gas (GHG or GhG) is a gas that absorbs and emits radiant energy in the thermal infrared range (O3). Without greenhouse gases, the average surface temperature of the Earth would be closer to 18 °C (0 °F) than it is today, which is 15 °C (59 °F). Additionally, greenhouse gases are found in the atmospheres of Venus, Mars, and Titan.

Thus the correct order goes as:

Forestry, agriculture, transportation, residential and commercial buildings

To learn more about greenhouse gases from the given link below,

https://brainly.com/question/13618102

#SPJ4

The molecular equation representing aqueous nitric acid and aqueous ammonia reacting is :

                      NH₃(aq) + HNO₃(aq) → NH₄⁺(aq) + NO₃⁻(aq)

                      NH₃(aq) + HNO₃(aq) → NH₄NO₃(aq)

An acid-base reaction is not the exchange of a hydrogen atom H. It is the exchange of a hydrogen ion (or proton) H⁺.

This reaction combines two ions produced into a single compound. In aqueous solution, the products should be NH⁴⁺ and NO³⁻, since ammonium nitrate is freely soluble in water. Thus, this reaction would be reasonable if reaction does not occur in aqueous solution.

So, the net ionic equation is,

                       NH₃(aq) + HNO₃(aq) → NH₄⁺(aq) + NO₃⁻(aq)

To learn more about molecular reactions and equations,

https://brainly.com/question/1406854

#SPJ4

The sample most likely to be a protein .

Amino acids, which are smaller building blocks of proteins, are linked together in lengthy chains to form proteins. To create a protein, 20 distinct kinds of amino acids can be mixed. Each protein's precise function and distinctive 3-dimensional structure are determined by the order of the amino acids.

Combinations of three DNA building units (nucleotides), which are dictated by the order of genes, are used to code for amino acids.

The main functions of the proteins are determined below:-

To learn more about protein, refer this link

https://brainly.com/question/19853586

#SPJ4

The ph of a 0.10 m monoprotic acid ha is measured to be 3.5. The ka value of this acid is 10^(-6).

What is pH?

The hydrogen ion concentration is measured using the pH scale. The pH values, which range from 0 to 14, are assigned to it. Therefore, we may say that the pH value is a number that represents how acidic or basic a solution is.

A solution with a pH below 7 is referred to as acidic, and one with a pH over 7 is referred to as basic, or alkaline.

HA⇌H+ + A−

ka= [H +][A −]/[HA]

For weak acids, [H+] = [A-]

[H+] = 10^(-pH)

Thus, Ka = {10^(-3.5)}^2/0.10 = 10^(-6)

​To learn more about pH from the given link below,

https://brainly.com/question/4485644

#SPJ4

The mixture of isotope to produce this average mass is  is is 50% Cl-35 and 50% CI-37.

Chlorine has two stable isotopes chlorine 35, and chlorine37, with chlorine 35 accounting for about three of the four naturally occurring chlorine atoms. Chlorine 36, also known in nature, is a radioactive isotope with a half-life of about 30,000 years.

Chlorine has two stable isotopes. Cl-35 and Cl-37 with atomic weights of 34.96 and 36.95 respectively. Chlorine has an atomic weight of 35.5 instead of 35 because it has what is called an isotope.

The main difference between chlorine 35 and 37 is that chlorine 35 has 18 neutrons per nucleus while chlorine 37 has 20 neutrons per nucleus. To calculate the proportion of each isotope in a sample of an element, chemists typically divide the number of atoms of a particular isotope by the total number of atoms of all isotopes of that element and multiply the result by 100.

Learn more about The chlorine here:-https://brainly.com/question/14697980

#SPJ9

Answer: Answer

Iron is a chemical element with symbol Fe and atomic number 26. It is a metal that belongs to the first transition series and group 8 of the periodic table. It is, by mass, the most common element on Earth, right in front of oxygen, forming much of Earth's outer and inner core. It is the fourth most common element in the Earth's crust.

Explanation:

Hope this helps!

Answer:

iron:

group 8

4 orbitals

electrons per shell:2,8,14,2

26 electrons

8 valence electrons.

Explanation:

iron is in the 8th group in the periodic table because it is a transition metal and their valence shells have 8 electrons.

It has 4 electron shells because the first one can hold two electrons, the second has 8 and so on.

The total number of electrons is 26, which is equal to number of protons.

Valence electrons are in the outermost shell.

The IUPAC name of the compound is (r)-3-bromo-3-methyl-1-hexene.

Or  (r)-3-bromo-3-methyl-1-hexene.

Learn more about IUPAC here:

https://brainly.com/question/17194396

pH of the given solution will be: 3

Given,

mass of nitric acid is 773mg = 0.773g

Molar mass of nitric acid is 63.01 mol

volume of solution is 180dm³

First we will obtain the concentration of Nitric acid by formula n = CV

C is the concentration

V is the volume of the solution

mass of acid is already provided in the question

we know that

no. of moles = given mass / molar mass

no. of moles of nitric acid = 0.773 / 63.01 = 0.12

C = n/V

C = 0.12 / 180 = 0.0006

We can find out pH by negative logarithm of H+ ( concentration)

pH = - log [ H+ ]

pH = - log [ 0.0006 ]

pH = 3.22 = 3

Therefore, pH of the solution is 3 (acidic)

Learn more about pH here:

https://brainly.com/question/13557815

#SPJ4

Enolate synthesis, nucleophilic addition, and elimination are the three basic steps in the mechanism of a Claisen reaction.

What is Nucleophilic addition reaction?

A chemical molecule having an electrophilic double or triple bond combines with a nucleophile in a nucleophilic addition reaction, breaking the double or triple bond.

A nucleophile attacking the electrophile's location in the reactant molecule and displacing it to generate a product is known as nucleophilic substitution. An electrophile, which is an electron-deficient species that accepts electrons, is present in an electrophilic addition reaction.

To learn more about Nucleophilic addition reaction click the given link

https://brainly.com/question/13415441

#SPJ4

When we treated 1-pentyne with 2 equivalent of HBr, the formation of 2-Bromo-1-pentene takes place. This reaction follows Markonikov's rule, which states that incoming nucleophile is added to the carbon atom, which has less hydrogen.

When we treated 1-pentyne with 2 equivalent of HBr, the formation of 2-Bromo-1-pentene takes place. This reaction follows Markonikov's rule, which states that incoming nucleophile is added to the carbon atom, which has less hydrogen.

1-bromo-1-pentene.

To learn more about hydrogen, refer to:

https://brainly.com/question/19813237

#SPJ4

Answer:

Four kingdoms:

The kingdoms in the domain Eukarya are Protista, Fungi, Plantae, and Animalia.

Answer: Four Kingdoms! I hope you get this question!

Explanation:

Elution sequence for chemicals, from the fastest to the slowest is hydrocarbons, olefins, ethers, halocarbons, aromatics, ketones, aldehydes, esters, alcohols, amines and acids.

What is Elution sequence ?

No matter how polar the compounds are, the more polar the solvent, the faster the chemicals elute. Therefore, altering the polarity of the solvent will not alter the order in which the compounds elute off a TLC or column. This may seem counterintuitive because a polar solvent would seem to carry polar compounds farther than nonpolar compounds.

Consider that chemicals and solvents will fight for locations on the stationary phase in order to help you visualize this idea. Slow elution will be caused by molecules remaining attached to the stationary phase due to a less polar solvent's poor ability to compete. Molecules and a polar solvent will successfully contend for locations on the stationary phase.

To learn more about elution sequence click the given link

https://brainly.com/question/16780919

#SPJ4

There are 0.96 moles of toluene are in the solution of toluene (C₇H₈) in 301 g of cyclohexane (C₆H₁₂) having a boiling point of 90.30°C.

Given data -

Boiling point of cyclohexane = 90.30°C

Mass of cyclohexane = 301 g

Kb of cyclohexane = 2.92°C/m

Tb of cyclohexane = 80.90°C

Using the equation,

           m = ∆Tb

                   Kb

where,

m is molality of the solution,

∆Tb is the change in boiling point of cyclohexane -

          90.30 ° C - 80.90 °C = 9.40 °C

Kb is the boiling point elevation constant of cyclohexane, 2.92 °C/m

          Molality (m) =  9.40 = 3.22 mol/kg

                                   2.92

Number of moles of toluene = molality x mass of cyclohexane (in kg)

                                                = 3.22 x 301  

                                                               1000

Number of moles of toluene = 0.96 mol

To learn more about the boiling point,

brainly.com/question/15460220

#SPJ4

In this reaction, hexanitrile will be the major product.

CH₃ − CH₃(Br) − CH₃ − CH₃ − CH₃ − CH₃  + NaCN = CH₃ − CH₃(CN) − CH₃ − CH₃ − CH₃ − CH₃

Thus, the major product of reaction of 2-bromohexane with sodium cyanide is hexanitrile.

Learn more about Nucleophilic substitution here:

https://brainly.com/question/10143438

#SPJ4

The pressure of gas will increase by a factor of 4.

When absolute temperature of a gas is increased 4 times while maintaining constant volume, The pressure of the gas is increased by a factor of 4.

This can be explained by Gay-Lussac Law, which states that at any constant volume, the pressure of the gas will be directly proportional to the temperature for a given gas.  
PV=nRT  ,

Gay-Lussac law explains  the relationship between temperature and pressure at constant volume. 

P ∝ T  =>  P1 / T1 = P2 / T2

Learn more about Ideal Gas law’s here-

https://brainly.com/question/25290815

#SPJ9

Answer:

Explanation:

520:2.54=204.7 round to 205 the answer=205 cm=520 inches

The following value to the ordinary numbers:

a - 5.5 × 10⁻⁶ = 0.0000055

b - 2.9 ×10² = 2900

c - 1.115 × 10⁴ = 11150

d - 1.412 × 10⁻³ = 0.001412

e - 7.2 × 10¹ = 72

To convert standard form numbers to regular form: Give a regular number a power of 10. It is necessary to multiply the decimal number by this power of 10. You should type your number like a regular number.

A decimal is one of the number types in mathematics that has a fractional component and a complete integer split by a decimal point. The point that appears between the components of a whole integer and a fraction is known as the decimal point. 34.5 is an example of a decimal number.

To know more about Numbers visit:

https://brainly.com/question/17429689

#SPJ9