The mass of antifreeze required to fill a 2.5 gallon car radiator is
Since, 1 gallon = 3.785 L
2.5 gallon = 9.4625 L
Given,
Gasoline = 9.4625 L x 1000 mL/L
= 9462.5 mL
Density = 0.79 g/mL
Mass = Density x volume (density = mass )
Mass = 0.79 g/mL x 9462.5 mL volume
Mass = 7475.37 g
Therefore,
Mass of antifreeze, in grams = 7475.37 g
To learn more about antifreeze,
brainly.com/question/2770534
#SPJ1
the boiling point of butane is less that that of hexane because of increase in
Hexane, CH3CH2CH2CH2CH2CH3, has a boiling point of 69ºC, while butane has a boiling point of 0.4ºC. Both molecules are nonpolar. Describe the significant difference between these two substances' boiling points.
Intermolecular attractions are the likely cause of the significant disparity in the boiling points of butane and hexane. Due to its size (molecular weight = 86) and higher number of electrons and nuclei, hexane has stronger and more durable van der Waals forces. With a molecular weight of 58, butane is a smaller molecule with less van der Waals forces.
Hexane has a higher boiling point than butane as a result, while butane has a lower boiling point.
Learn more about butane here:
https://brainly.com/question/14818671
#SPJ9
what is the difference between copper bromide and copper chloride solution when exposed to the flame test ?
Answer:
copper chloride is green
and bromide copper is gray
Explanation:
because the copper(II) ion
Hello,
I am stuck on this: What is the de Broglie wavelength of a neutron (mass = 1.009 amu) moving at a velocity of 7.11 × 10⁶ meters per second?
I know the formula is wavelength= h/mv, but I keep getting the answer incorrect as: 4.67E-27
The de Broglie wavelength of the neutron moving at a velocity of 7.11×10⁶ m/s is 5.56×10¯¹⁴ m
de Broglie wavelength formulaλ = h /mv
Where
λ the de Broglie wavelengthh is the Planck's constantm is the massv is the velocityHow to determine the de Broglie wavelengthThe following data were obtained from the question:
Mass (m) = 1.009 amu = 1.009 × 1.661×10⁻²⁷ = 1.676×10⁻²⁷ KgVelocity (v) = 7.11×10⁶ m/sPlanck's constant (h) = 6.626×10¯³⁴ Jsde Broglie wavelength (λ) =?The de Broglie wavelength can be obtained as follow:
λ = h /mv
λ = 6.626×10¯³⁴ / (1.676×10⁻²⁷ × 7.11×10⁶)
λ = 5.56×10¯¹⁴ m
Learn more about de Broglie wavelength:
https://brainly.com/question/17438823
#SPJ1
what is photosynthesis
Answer:
Photosynthesis is the process by which plants use sunlight, water, and carbon dioxide to create oxygen and energy in the form of sugar.
Answer: Photosynthesis is a process used by plants and other organisms to convert light energy into chemical energy that, through cellular respiration, can later be released to fuel the organism's activities.
Explanation:
Complete the equation for the equilibrium present in the region bc X(s)=?
The following equality statistic is available for the BC X (s) region states:
The following data is obtained using the equilibrium diagram:
shows the various categories that can be found in various temperatures and shapes.
It demonstrates how one object can solidly melt over another.
Describes the amount of the temperature at which the material system solidifies or solidifies.
The rate of reaction is equal to the rate of reaction in an equilibrium situation.
Examples of equilibrium include a book on the table, liquid in a tightly sealed container, full solution, ionic compounds in polar solvents, and the synthesis of ammonia.
Learn more about equilibrium here:
https://brainly.com/question/13463225
#SPJ9
If a patient receives a dose with an activity of 53.8 mCi of technetium-99m for cardiac imaging, how much radioactivity will be left in the patient’s body 72 hours after injection?
Therefore if a patient receives a dose with an activity of 53. 8 mCi of technetium-99m for cardiac imaging, radioactivity will be left in the patient’s body 72 hours after injection is 0.00024
The equation that describes the radioactive decay is:
Ln [A] = -kt + Ln [A]₀
Where [A] could be taken as activity of the source after time t, [A]₀ is initial activity and k is decay constant.
Decay constant could be written as:
k = ln2 / Half-life
k = ln 2 / 6h
k = 0.115h⁻¹
Replacing in decay equation:
ln a = -0.115 x 72 + Ln [53.8]
ln a = - 8.28 + 3. 98
ln a = - 8.28
log a = -4/ 2.303
log a = 1.867
Therefore if a patient receives a dose with an activity of 53. 8 mCi of technetium-99m for cardiac imaging. radioactivity will be left in the patient’s body 72 hours after injection is 1.867
To learn more about radioactivity refer here
https://brainly.com/question/2320811
#SPJ9
Xylem cells have thickened walls how does this thickening differ in the two xylem shown in the diagram
The secondary cell wall of the elongated, hollow xylem cells, which are dead, contains lignin.
What functions as the xylem?The specialized tissue in vascular plants called xylem distributes nutrients and water from the plant-soil contact to the stems and leaves as well as serving as a mechanical support system and a storage system. One of the key characteristics that sets vascular plants apart is the xylem's ability to transmit water.
Where can you locate the xylem?Vascular bundles, which are found in both non-woody plants and non-woody sections of woody plants, contain xylem. In woody plants, a meristem known as the vascular cambium lays down secondary xylem. as a component in a starry arrangement rather than a bundle, as in many ferns.
To know more about Xylem visit:
https://brainly.com/question/11536380
#SPJ9
a solution with a ph of 11.7 is how many time more basic than a solution with a ph of 8.7
Answer:
1000
Explanation:
A solution with a pH of 11.7 is ____ times more basic (alkaline) than a solution with a pH of 8.7 1000
Level 3: 1. The type of hydrogen labeled as A, B and C are prepared as follows: Type of hydrogen Method of preparation A B C a. b. What are A, B and C? Which is most powerful reducing agent? Which hydrogen can never be isolated? Write an example of reaction which proves B is more powerful reducing agent than Write a balanced reaction which proves C is stronger reducing agent than A. Project Activity Mg + dil.HCI Passing molecular H₂ under electric arc at low pressure Sn and conc. HC1 in solution. C. d. e. World is facing problems of environmental pollution due to excessive use of fossil fuel. The c like Nepal is suffering from fuel crisis. Make a report on "use of hydrogen as fuel" and hydrogen an alternative to fossil fuel like diesel, petrol etc. Also mention limitations of the H₂ as fuel. 334 A New Comprehensive Chemistry Approved by CDC
Answer:
nnnj
Explanation:
James Author I m not sure if you have any questions or concerns please visit the plug-in settings to determine how attachments are handled the situation and see if you have yyyy I m not sure if you have any questions or concerns please visit the plug-in settings to determine how attachments are handled the situation and I m not sure if you have any questions or concerns please visit the plug-in I m not gonna lie in bed with step by step by step instructions on how we can get the answer to your account we will tell you have any questions you might want I will be able and you will send the hw the whole thing is the whole thing I have to the whole of I m too many like a good for the plug-in the plug-in I m eating a good for the whole time I was just for you the whole of the et I m eating a email to the answer to the answer to the same is the answer is er the whole time is the best ee the whole of I will send me a good time for the plug-in the whole thing was I is not to mention the plug-in I am a email I will be able to the answer is no sharing to others and you can get the
What is the oxidation state of O in NO₂?
OA. +2
OB. -2
O C. O
OD. -4
Answer:
Let it be x
[tex]{ \tt{ (oxidation \: state \: of \: nitrogen) + 2x = overall \: charge}} \\ { \tt{ - 4 - 2 x = 0}} \\ { \tt{2x = - 4}} \\ { \tt{x = - 2}}[/tex]
How many atoms or molecules are in 10 grams of table salt?
Answer:
1.03 x 10²³ atoms NaCl
Explanation:
To find the amount of table salt (NaCl) in atoms, you need to (1) convert grams to moles (using the molar mass) and then (2) convert moles to atoms (using Avogadro's Number). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units.
(Step 1)
Molar Mass (NaCl): 22.99 g/mol + 35.45 g/mol
Molar Mass (NaCl): 58.44 g/mol
10 grams NaCl 1 mole
------------------------ x ----------------------- = 0.17 moles NaCl
58.44 grams
(Step 2)
Avogadro's Number:
6.022 x 10²³ atoms = 1 mole
0.17 moles NaCl 6.022 x 10²³ atoms
-------------------------- x -------------------------------- = 1.03 x 10²³ atoms NaCl
1 mole
Which of the following is a form of identity fraud?
A. Chipping
B. Skimming
C. Chirping
D. Skipping
Answer:
B. Skimming
Explanation:
Skimming is an electronic method of stealing a victim's credit card number and then using the information to make fraudulent purchases.
Why is the percentage of food eaten a good number to use? Explain.
If 2.96 mL of seawater contains about 7.86×10-14 moles of gold, how many atoms of gold are in that volume of seawater? atoms
The number of atoms of gold in the 2.96 mL of the seawater is 4.73×10¹⁰ atoms
Avogadro's hypothesis1 mole of Gold = 6.02×10²³ atoms
With the above information, we can determine the number of atoms in the seawater. Details below
How to determine the atoms in 7.86×10⁻¹⁴ mole of gold1 mole of Gold = 6.02×10²³ atoms
Therefore,
7.86×10⁻¹⁴ mole of gold = (7.86×10⁻¹⁴ mole × 6.02×10²³ atoms) / 1 mole
7.86×10⁻¹⁴ mole of gold = 4.73×10¹⁰ atoms
Thus, 4.73×10¹⁰ atoms of gold are present in the seawater
Learn more about number of atoms:
https://brainly.com/question/19793346
#SPJ1
If ln(x) = 3.11, what is the value of x?
Express your answer to two significant figures.
If ln(x) = 3.11, the value of x is 22.64. it has 4 significant figures.
In positional notation, significant figures are the digits in a number that is trustworthy and required to denote the amount of something. The correctness and precision of numbers are the focus of significant figures, also known as significant digits, which are crucial components of scientific and mathematical calculations.
significant figures play a crucial role when estimating the degree of uncertainty in the outcome. The number of digits that can be determined with some degree of certainty is relevant to significant figures. When compiling data from an experiment, keeping track of this number is crucial because it reduces mistakes.
To know more about significant figures refer to: https://brainly.com/question/14359464
#SPJ9
A runner exerting a running force of 325 N to the right is met with an air resistance force of 45 N to the left. What is the net
force of the runner? (1 point)
O 45 N
O 280 N
O 370 N
O 325 N
The net force of the runner, given the data from the question is 280 N
Data obtained from the questionFrom the question given above, the following data were obtained:
Exerting force = 325 NResistance force = 45 NNet force =?How to determine the net forceThe net force of the runner can be obtained as illustrated below:
Net force = Exerting force - resistance force
Net force = 325 - 45
Net force = 280 N
From the calculation made above, we can conclude that the runner's net force is 280 N
Learn more about net force:
https://brainly.com/question/13051854
#SPJ1
The net force of the runner would be 280 N.
Hope this helps! Also, if you need help with the other questions regarding this assignment, feel free to check out the study set I made on Quizlet. Thanks and good luck!
Quizlet - "Unit 6: Lesson 2 Newton's First Law QC"
h t t p s : / / q u i z l e t. c o m / 7 3 7 7 5 9 5 5 5 / u n i t - 6 - l e s s o n - 2 - n e w t o n s - f i r s t - l a w - f l a s h - c a r d s / ? n e w
What is the molar mass of 56.75 g of gas exerting a pressure of 2.87 atm on the walls of a 5.29 L container at 230 K
Molar mass is thus 70.6 g/mol.
We must first determine how many moles of gas are there in the container.
PV = nRT
where;
P - pressure = 290 802.75 Pa = 2.87 atm x 101 325 Pa/atm
Volume: 5.29 x 103 m3, or V.
quantity of moles, n
R, the global gas constant, is 8.314 Jmol K-1.
Temperature is 230 K, or T.
using these values as a substitute in the equation
n x 8.314 Jmol 1 K x 230 K = 290 802.75 Pa x 5.29 x 10 3 m3
n = 0.804 mol
the molar mass = [tex]\frac{mass present}{number of moles}[/tex]
the molar mass of gas =[tex]\frac{56.75g}{0.804 mol}[/tex]
therefore molar mass is 70.6 g/mol
Molar mass is 70.6 g/mol as a result.
The molar mass of a chemical compound is defined as the mass of the sample divided by the amount, or the number of moles, in the sample, measured in moles. A substance's molar mass is a bulk characteristic rather than a molecular one.
The phrases "molecular mass" and "formula mass," which refer to molar mass specifically for molecular compounds, are commonly used interchangeably; nevertheless, the definitions provided by the most trustworthy authorities vary.
The molar mass is the appropriate unit for converting between a substance's mass and quantity in bulk quantities.
To learn more about molar mass from the given link:
brainly.com/question/22997914
#SPJ9
Anything which deteriorates the quality of air around us is called
A. a gas
B. a molecule
C. a pollutant
D. a component
Answer: The answer is C, a pollutant.
Explanation:
The word pollutant comes from the word pollution, pollution is when a chemical makes the air toxic.
A __________ is an area of land that rises very high above the land around it.
lake
mountain
plain
river
Answer:
Mountain
Explanation:
what is one of the most common causes of injury in the laboratory
Answer:
Chemical Spilling And Heat burns
Explanation:
One of the most common injurys in science labs is various chemical falling due to carless opening or handling
Heat burns are also evenly matched along with chemical spill this is cuased due to burners being left open or not wearing th eprober equipment to be next to heat
Can someone tell me how to do this. Also just answer the first one so I can get it
Answer:
it is 3 in a half inches long i hope this helped
A scientist is trying to discover information about an unknown metal in a compound. The formula for the compound is believed to be XBr3 where X is the unknown metal. The scientist determined that a 4.727 g sample of this compound contains 5.317×10−2 mol Br . Calculate the atomic mass of the unknown metal, X .
Atomic Mass=
What is the identity of the metal? Provide the name or symbol of the element.
Metal:
The atomic mass of the element X is 56 and the element can be seen to be iron.
What is the identity of element X?In this problem, we are given a compound to obtain the identity of the unknown element therein.
We already can relate that;
Number of moles = mass/molar mass
Number of moles Br = 0.04806 moles
Molar mass of Br could be obtained as 79.9 g/mol
We have;
Mass = Number of moles x molar mass
= 0.04806x 79.9
= 3.84 g
Mass of X = 4.735 - 3.84
= 0.895 g
Given that there are 3 moles of Br for every 1 mole of X. We have 0.04806 mole of Br present in 4.735 g, then the number of moles of X present would be:
0.04806/3 = 0.01602 moles
Molar mass = mass/mole
= 0.895/0.01602
= 55.87 or 56 g/mol
Hence, the element X is iron
Learn more about molar mass: brainly.com/question/12127540
#SPJ1
what were the 3 constellations that were above the horizon at
9PM on August 31, 2022?
The density of titanium is 4.51 g/cm^3. what is the volume (in cubic inches) of 3.0 lb of titanium?
What is a concept or principle from the natural sciences that is relevant to John Snow's work on Aesthetics?
We will immediately say that right here idea or idea or precept from the from the herbal sciences college students, herbal sciences- that could be a relevant that is real occasion to snow's paintings on Anaesthetics. the scholars is thereto substances.
Propofol, etomidate, and ketamine are the intravenous sedative-hypnotic retailers typically used to result in standard anesthesia, at the same time as adjuvant dealers, eg, opioids, lidocaine, midazolam are frequently used to complement the effects of the primary sedative-hypnotic induction agent.
Examples consist of an epidural to ease the pain of childbirth or at some stage in a cesarean phase, a spinal for hip or knee surgical procedure, or an arm block for hand surgical treatment. preferred anesthesia: This remedy makes you subconscious and insensitive to ache or other stimuli.
Propofol is the maximum usually used IV fashionable anesthetic. In lower doses, it induces sleep whilst allowing a affected person to maintain respiration on their personal. It's far regularly utilized by anesthesiologist for sedation similarly to anxiolytics and analgesics.
Learn more about Anaesthetics here:- https://brainly.com/question/9918511
#SPJ9
Which of the following elements is most likely to have an oxidation state of
+2?
A. Strontium (Sr)
B. Oxygen (0)
C. Sodium (Na)
D. Chlorine (CI)
The element from the list that is most likely to have an oxidation state of +2 is Strontium (Sr).
What is oxidation state?The oxidation state of an element of an atom refers to the total number of electrons that is gainable or losable in order to form a bond with another atom.
The oxidation state of an atom is also known as its oxidation number.
Strontium with atomic number 38 and electron configuration of [Kr]5[tex]s^2[/tex] has 2 losable electrons in order to form a bond.Oxygen with atomic number 8 and electron configuration of [He] 2s²2p⁴ has 2 gainable electrons in order to form a bond.Chlorine with atomic number 17 and electron configuration of [Ne] 3s²3p⁵ has 1 gainable electron in order to form a bond.Thus, the element that is most likely to have an oxidation state of +2 is Strontium (sr).
More on oxidation numbers can be found here: https://brainly.com/question/15167411
#SPJ1
Which of the following statements best compares nuclear power and hydropower based on their rates of renewal?
Hydropower has a faster rate because water is continuously being recycled through the hydrogeological cycle.
Nuclear power has a faster rate because all elements are spontaneously radioactive and are a source of nuclear energy.
Hydropower has a slower rate because a large volume of water vapor that evaporates takes several years to return to water cycle.
Nuclear power has a slower rate because the nuclear waste produced is not radioactive and thus cannot be used further as a fuel.
Hydropower is best compared to nuclear power based on their rates of renewal.
Because water is continually regenerated through the hydrogeological cycle, hydropower has a higher rate.Because all elements spontaneously produce radioactive material, which is a source of nuclear energy, nuclear power has a higher rate.Because it takes a significant amount of evaporated water several years to return to the water cycle, hydropower has a slower rate.Because the nuclear waste generated by nuclear power cannot be recycled as fuel and is not radioactive, it produces waste at a slower pace.What is hydropower's primary source?Water in motion generates hydroelectricity, namely the winter and spring runoff from mountain streams and crystal-clear lakes. Water can be utilized to turn turbines and generators that produce power when it is falling due to gravity.To learn more about hydropower visit:
https://brainly.com/question/22258411
#SPJ9
If you change the atomic mass to a whole number and subtract the atomic number from it, what does the answer symbolize?
Answer:
Based on the mass number of an element, one can determine the number of neutrons that element has. The identity of an element implies its number of protons, and thus one can subtract atomic number from mass number to determine the number of neutrons in the atom's nucleus.
what consumer in the food chain is going to have to eat the most food tomeet their energy needs?
Answer:
Secondary consumer
Explanation:
The organism that eats the primary consumer to get the energy is known as the secondary consumer. They are generally meat-eaters—carnivores. Tertiary consumers eat primary consumers and secondary consumers. They are carnivore-eating organisms, like eagles or big fish.
Answer:
the producers will eat the most food
What is the mass of a sample of copper with a volume of 4.5 cubic centimeters?
The mass of a sample of copper with a volume of 4.5 cubic centimeters is 40.32 grams.
A substance's density is defined as its mass per unit of volume. Density is most frequently represented by the symbol, however Latin letter D may also be used. Mass divided by volume is the formula for density in mathematics: ρ = m / v , where ρ is the density, m is the mass, and V is the volume.
So, ρ = m/v
8.96 = m / 4.5
40.32 g = mass
Therefore, the mass of a sample of copper with a volume of 4.5 cubic centimeters is 40.32 grams.
Learn more about density here;
https://brainly.com/question/15164682
#SPJ9