blue whales use a sound of frequency 17hz which can be heard 1000km away in the ocean. what is the wavelength of the sound in seawater where the speed is 1510 m/s?

The temperature of a metal being welded if it radiates most strongly at 590 nm, we can use the Wien's Displacement Law formula.

The wavelength at which a metal radiates most strongly is directly related to its temperature according to Wien's law: λ_max = b/T, where λ_max is the wavelength of maximum radiation, T is the temperature in Kelvin, and b is a constant equal to 2.898 x 10^-3 m*K.
Converting 590 nm to meters, we get 5.90 x 10^-7 m. Substituting this into Wien's law and solving for T, we get:
T = b/λ_max = 2.898 x 10^-3 m*K / 5.90 x 10^-7 m = 2.553 x 10^6
Converting Kelvin to Celsius, we get:
2.553 x 10^6 K - 273.15 = 2.553 x 10^3 degrees Celsius
Rounding to two significant figures, we get approximately 2,553 degrees Celsius as the temperature of the metal being welded.

1. Wien's Displacement Law formula is: λmax * T = b, where λmax is the wavelength at which the radiation is maximum, T is the temperature, and b is Wien's constant (b ≈ 2.9 * 10^-3 m*K).
2. Rearrange the formula to solve for T: T = b / λmax
3. Convert the given wavelength from nm to meters: 590 nm = 590 * 10^-9 m
4. Plug the values into the formula: T = (2.9 * 10^-3 m*K) / (590 * 10^-9 m)
5. Calculate the temperature: T ≈ 4900 K
The temperature of the metal being welded, which radiates most strongly at 590 nm, is approximately 4900 K, expressed using two significant figures.

To know more about Displacement visit:

https://brainly.com/question/11934397

#SPJ11

The temperature of the coffee at t = 1 minute is approximately 53.38 degrees Fahrenheit.

To find the temperature of the coffee at t = 1 minute, we need to substitute t = 1 into the temperature function r(t) and evaluate it.

Given the temperature model:

r(t) = 55e^(-0.03t^2)

Substituting t = 1 into the equation:

r(1) = 5e^(-0.03(1)^2)

= 55e^(-0.03)

Using a calculator to evaluate e^(-0.03), we find that it is approximately 0.97045.

Now, substitute this value back into the equation:

r(1) ≈ 55 * 0.97045

≈ 53.37775

Therefore, the temperature of the coffee at t = 1 minute is approximately 53.38 degrees Fahrenheit.

For more such questions on Farenheit

https://brainly.com/question/30403835

#SPJ11

To find the current through a loop needed to create a maximum torque of 9.0 N·m, we can use the formula for the torque experienced by a current-carrying loop in a magnetic field. By rearranging the formula, we can solve for the current.

The torque experienced by a current-carrying loop in a magnetic field is given by the formula:

τ = nABIsinθ

where:

τ is the torque (given as 9.0 N·m),

n is the number of turns (given as 50),

A is the area of each turn (15.0 cm × 15.0 cm = 0.15 m × 0.15 m = 0.0225 m²),

B is the magnetic field strength (given as 0.800 T),

I is the current we need to find, and

θ is the angle between the magnetic field and the plane of the loop (assuming it is 90 degrees in this case, resulting in sinθ = 1).

Plugging in the given values, we can solve for I:

9.0 N·m = (50)(0.0225 m²)(0.800 T)I

Simplifying the equation:

9.0 N·m = 0.900 N·m·T·I

Dividing both sides by 0.900 N·m·T:

I = 9.0 N·m / (0.900 N·m·T)

I = 10.0 A

Therefore, the current through the loop needed to create a maximum torque of 9.0 N·m is 10.0 Amperes.

To learn more about Torque :brainly.com/question/30338175

#SPJ11

To calculate the theoretical steady-state levels of the quantities i1, i2, i3, i4, v1, v2, v3, and v4, we would need the circuit diagram or the specific configuration of the circuit, including the values of the resistors and capacitors involved. Without this information, it is not possible to provide a specific answer.

However, in general, in a circuit containing ideal capacitors and resistors, the steady-state levels of currents and voltages can be determined using Kirchhoff's laws and the equations governing the behavior of capacitors and resistors in the circuit. These equations involve solving systems of linear equations and can vary depending on the circuit's topology and the arrangement of the components.

To calculate the theoretical steady-state levels, one needs to analyze the circuit using the relevant equations and principles of circuit analysis, taking into account the values of the resistors, capacitors, and any applied voltage or current sources in the circuit.

Learn more about steady-state levels : brainly.com/question/31521278

#SPJ11

The general rule for finding the proper rivet diameter is to use a diameter that is approximately 1.5 times the thickness of the thickest sheet or material being joined. This ensures a secure and sturdy joint. It's also important to consider the length of the rivet and the grip range needed for the specific application. The formula to find the proper rivet diameter is: Rivet Diameter = Material Thickness x 1.5

To ensure a proper rivet diameter, the general guideline is to choose a size that corresponds to the thickness of the materials being joined. The goal is to select a rivet diameter that fits snugly within the pre-drilled holes, striking a balance between being neither too loose nor too tight.Several considerations come into play when deciding on the rivet diameter, such as the type of involved, their thickness, and the specific requirements of the application. It is crucial to select a diameter that can deliver a sturdy and secure joint, ensuring the rivet effectively holds the materials together.Factors such as material strength, load bearing requirements, and environmental conditions may also affect the choice of rivet diameter. Consulting with a professional or referring to industry standards and guidelines can help determine the appropriate size for a specific application.Therefore the  formula to find the proper rivet diameter is: Rivet Diameter = Material Thickness x 1.5

To learn more about  pre-drilled holes  visit:https://brainly.com/question/30898889

#SPJ11

When computing the 175-point Discrete Fourier Transform (DFT) of a signal, there are a few important considerations:

1. The DFT size: The DFT size should match the number of samples used for the computation. In this case, a 175-point DFT is being computed.

2. Frequency resolution: The frequency resolution of the DFT is determined by the sampling rate and the DFT size. In this case, the sampling rate is 425 samples/second, and the DFT size is 175 points. The frequency resolution can be calculated as fs/N, where fs is the sampling rate and N is the DFT size. Therefore, the frequency resolution would be 425/175 = 2.43 Hz.

3. Frequency range: The DFT represents the frequency content of a signal up to the Nyquist frequency, which is half of the sampling rate. In this case, the Nyquist frequency would be 425/2 = 212.5 Hz.

With the given information, you can now compute the 175-point DFT of the signal, which will provide the frequency content of the signal up to the Nyquist frequency of 212.5 Hz with a frequency resolution of 2.43 Hz.

To know more about Transform refer here

https://brainly.com/question/11709244#

#SPJ11

The natural barrier that typically prevents two protons from combining is the electrostatic repulsion between their positive charges.

Two protons are both positively charged particles, so they repel each other electrostatically due to the Coulomb force. This repulsive force is caused by the electric charge of the protons, and it is proportional to the product of the charges and inversely proportional to the square of the distance between them. The closer the protons get to each other, the stronger the repulsion force becomes, making it difficult for them to combine. Therefore, the natural barrier that usually prevents two protons from combining is the electrostatic repulsion force. However, in certain conditions, such as high temperatures and pressures, protons can overcome this barrier and undergo a nuclear fusion reaction, which is the process that powers stars.

Learn more about "electrostatic repulsion":

https://brainly.com/question/132325

#SPJ11

The generally accepted rule of thumb for determining whether the infinite fin assumption can be utilized is based on the fin's length-to-diameter ratio.

The infinite fin assumption is commonly employed in the analysis of heat transfer in fins to simplify calculations. It assumes that the fin is so long compared to its diameter that heat transfer occurs predominantly along the fin's length, with negligible heat transfer in the radial direction. This assumption allows for the use of simplified equations, such as the one-dimensional heat conduction equation.

The generally accepted rule of thumb states that if the length-to-diameter ratio of the fin exceeds 10, the infinite fin assumption can be safely utilized. This means that the length of the fin should be at least 10 times greater than its diameter. When the length-to-diameter ratio is large, the heat transfer along the fin's length dominates, and the radial heat transfer becomes negligible.

It is important to note that the use of the infinite fin assumption is an approximation and may introduce some error, especially when dealing with shorter fins or situations where radial heat transfer cannot be ignored. In such cases, more detailed analysis methods, such as fin efficiency calculations or numerical methods, should be employed to obtain more accurate results.

Learn more about assumption here : brainly.com/question/30799033

#SPJ11

The nuclear binding energy per nucleon for Ba-135 is approximately 1.133 x [tex]10^{-25[/tex]kg.

We need to convert the atomic mass from amu to kilograms (kg). The conversion factor is 1 amu = 1.66 x[tex]10^{-27[/tex] kg.

Mass of Ba-135 = 134.906 amu * (1.66 x [tex]10^{-27[/tex]kg/amu)

≈ 2.240 x [tex]10^{-25[/tex] kg

For Ba-135, the atomic number Z is 56 (since barium has 56 protons) and the mass number A is 135.

E = (56 * 1.673 x [tex]10^{-27[/tex] kg) + ((135 - 56) * 1.675 x [tex]10^{-27[/tex] kg) - (2.240 x [tex]10^{-25[/tex] kg)

= 93.688 x [tex]10^{-27[/tex] kg + 78.525 x[tex]10^{-27[/tex] kg - 22.40 x [tex]10^{-25[/tex] kg

≈ 1.529 x [tex]10^{-23[/tex]kg

Finally, to calculate the nuclear binding energy per nucleon (BE/A), we divide the total binding energy (E) by the number of nucleons (A).

BE/A = E / A

= (1.529 x [tex]10^{-23[/tex] kg) / 135

≈ 1.133 x [tex]10^{-25[/tex] kg

Binding energy refers to the energy required to hold a system together or to separate its constituents. It arises from the fundamental forces acting between particles, such as the strong nuclear force, electromagnetic force, and gravitational force. In the realm of atoms, binding energy refers to the energy needed to keep electrons in orbit around the atomic nucleus. Electrons occupy discrete energy levels, and the binding energy determines the stability of the electron configuration within an atom.

In the context of atomic nuclei, binding energy is the energy necessary to overcome the attractive forces between protons and neutrons and holds them together. The stronger the binding energy, the more stable the nucleus. The release of binding energy is the basis of nuclear power and atomic bombs.

To know more about Binding energy refer to-

brainly.com/question/31817434

#SPJ4

Broadcast TV reaches its audience by transmitting electromagnetic waves through the air across some geographic territory using television broadcasting infrastructure.

This infrastructure typically consists of TV stations or broadcasters that transmit the TV signals from their broadcasting towers or antennas.

The electromagnetic waves, carrying audio and video signals, are broadcasted over specific frequencies or channels and are picked up by TV antennas or receivers in households.

These receivers convert the electromagnetic waves back into audio and video signals, allowing viewers to watch TV programs on their  sets.

The coverage area of a broadcast TV signal depends on various factors, including the transmitting power, antenna height, and terrain.

To know more about geographic refer here

https://brainly.com/question/31532748#

#SPJ11

The helium flash occurs during the red giant phase in the stellar evolution of low- and intermediate-mass stars.

To understand the helium flash, we must first examine the stages of stellar evolution leading up to it. Initially, a star forms from a cloud of gas and dust, primarily composed of hydrogen. As the cloud contracts under gravity, its core heats up, and eventually nuclear fusion starts, converting hydrogen into helium. This process, called the main sequence stage, generates energy and allows the star to shine.

Over time, the hydrogen in the core depletes, and fusion moves to a shell around the core. The core, now primarily composed of helium, continues to contract and heat up, while the outer layers of the star expand due to the increased energy generated by the hydrogen shell fusion. This expansion causes the star to enter the red giant phase.

As the helium core contracts, its temperature rises until it reaches a critical point, typically around 100 million Kelvin, where helium nuclei can overcome their electrostatic repulsion and undergo nuclear fusion. This fusion converts helium into carbon and oxygen, producing a rapid burst of energy called the helium flash. The energy release is so sudden that it causes the star to experience a rapid increase in brightness, even though the event occurs deep within the core and is not directly observable.

In summary, the helium flash occurs during the red giant phase of low- and intermediate-mass stars, when the core temperature reaches a critical point, allowing helium nuclei to undergo nuclear fusion and produce a sudden burst of energy.

Learn more about stellar evolution at: https://brainly.com/question/12790561

#SPJ11

To calculate the ground-state energy of an electron in a rectangular box, we can use the equation for the energy levels in a three-dimensional box:

E = (h^2 / 8m) * [(n_x^2 / l_x^2) + (n_y^2 / l_y^2) + (n_z^2 / l_z^2)]

Where:

E is the energy of the electron

h is Planck's constant (6.626 x 10^-34 J*s)

m is the mass of the electron (9.10938356 x 10^-31 kg)

n_x, n_y, n_z are the quantum numbers for the energy levels in each dimension (1, 2, 3, ...)

l_x, l_y, l_z are the dimensions of the box in each dimension

Given:

l_x = 611 pm = 611 x 10^-12 m

l_y = 1290 pm = 1290 x 10^-12 m

l_z = 280 pm = 280 x 10^-12 m

We need to determine the values of n_x, n_y, and n_z for the ground state. In the ground state, all quantum numbers are equal to 1.

Substituting the values into the equation:

E = (6.626 x 10^-34 J*s)^2 / (8 * 9.10938356 x 10^-31 kg) * [(1^2 / (611 x 10^-12 m)^2) + (1^2 / (1290 x 10^-12 m)^2) + (1^2 / (280 x 10^-12 m)^2)]

Calculating the expression within the square brackets:

E = (6.626 x 10^-34 J*s)^2 / (8 * 9.10938356 x 10^-31 kg) * [(1 / (611 x 10^-12 m)^2) + (1 / (1290 x 10^-12 m)^2) + (1 / (280 x 10^-12 m)^2)]

E = (6.626 x 10^-34 J*s)^2 / (8 * 9.10938356 x 10^-31 kg) * [2.7426 x 10^12 m^-2 + 5.4136 x 10^11 m^-2 + 1.2599 x 10^13 m^-2]

E = (6.626 x 10^-34 J*s)^2 / (8 * 9.10938356 x 10^-31 kg) * [1.56343 x 10^13 m^-2]

E = (6.626 x 10^-34 J*s)^2 / (8 * 9.10938356 x 10^-31 kg) * 1.56343 x 10^13 m^-2

Now we can calculate the ground-state energy:

E ≈ 7.6079 x 10^-19 J

Therefore, the electron's ground-state energy in the given rectangular box is approximately 7.6079 x 10^-19 Joules.

To know more about electron refer here

https://brainly.com/question/12001116#

#SPJ11

High-expansion foam is particularly used for flooding large enclosed areas. High-expansion foam is a type of fire suppression foam that is designed to expand rapidly and fill up large volumes of space. It has a low density and high expansion ratio, which allows it to cover a large area and smother fires quickly.

High-expansion foam is commonly used in areas such as storage facilities, warehouses, and aircraft hangars, where there is a risk of fire spreading quickly and large volumes of space need to be protected. When high-expansion foam is deployed, it can quickly fill up the entire area, creating a barrier between the fire and other materials and preventing the fire from spreading.

Therefore, high-expansion foam is used for flooding large enclosed areas to suppress and control fires.

To know more about  high-expansion foam refer here

https://brainly.com/question/26463110#

#SPJ11

In part (b) of the problem, we need to determine the position and direction of an object attached to a spring 0.35 seconds after passing the equilibrium position, given an amplitude of 0.050 m and a period of 1.0 second. In part (c), we need to find the force exerted by the spring on the object when it is 0.030 m below the equilibrium position and moving upward.

(b) To determine the position and direction of the object 0.35 seconds after passing the equilibrium position, we need to understand the nature of simple harmonic motion. The object attached to the spring oscillates sinusoidally, so at any given time, its position can be described by the equation:

x = A * sin(2πt/T)

where x is the displacement from the equilibrium position, A is the amplitude, t is the time, and T is the period. Plugging in the values A = 0.050 m and T = 1.0 s, we can calculate the position at 0.35 seconds. However, to determine the direction of motion, we also need to consider the phase. If the object is moving downward at the equilibrium position, it will continue moving downward 0.35 seconds later.

(c) To find the force exerted by the spring when the object is 0.030 m below the equilibrium position and moving upward, we need to consider Hooke's law for springs. The force exerted by the spring is given by:

F = -kx

where F is the force, k is the spring constant, and x is the displacement from the equilibrium position. Since the object is 0.030 m below the equilibrium position and moving upward, the displacement x is negative. Plugging in the values and taking into account the negative sign, we can calculate the magnitude and direction of the force exerted by the spring.

Learn more about equilibrium here: brainly.com/question/30694482

#SPJ11

Covering one of the slits would alter the intensity at each point, with previously bright fringes becoming dimmer and dark fringes becoming brighter. If one of the slits in the mask were covered, the intensity at each point would be affected differently depending on their location in relation to the covered slit.

First, let's consider the case where the covered slit is in the middle of the mask. In this scenario, the intensity at each point would decrease. This is because light waves diffract through the slits in the mask, creating interference patterns on the other side. When one of the slits is covered, the interference pattern is disrupted, resulting in a decrease in overall intensity.

Now, let's consider the case where one of the outer slits is covered. In this scenario, the intensity at points closest to the uncovered slit would increase, while the intensity at points closest to the covered slit would decrease. This is because the uncovered slit is allowing more light to pass through, resulting in a greater concentration of light at the points closest to it. Conversely, the covered slit is blocking some of the light, resulting in a decrease in intensity at points closest to it.

In summary, the intensity at each point would be affected differently depending on the location of the covered slit. In some cases, the intensity would increase, while in others it would decrease. It all depends on the interference pattern created by the diffraction of light waves through the slits in the mask.

When both slits are open, interference patterns form due to the overlapping of waves from the two slits. This creates a pattern of alternating bright and dark fringes. When you cover one of the slits, interference no longer occurs, as there is only one source of light.

In this case, the intensity would decrease at points that were previously bright fringes, as there is no longer constructive interference. Conversely, the intensity would increase at points that were previously dark fringes, as destructive interference no longer takes place.

To know more about bright fringe visit:-

https://brainly.com/question/8896900

#SPJ11

a. the temperature when the column has a length of 16.70 cm is approximately 13.52°C. b. the temperature when the column has a length of 20.50 cm is approximately 47.18°C.

To solve this problem, we can use the linear expansion equation for the length of the alcohol column in the thermometer:

ΔL = αLΔT

where ΔL is the change in length, α is the coefficient of linear expansion, L is the original length, and ΔT is the change in temperature.

(a) Let's calculate the temperature when the column has a length of 16.70 cm.

Given:

L1 = 11.82 cm (length at 0.0°C)

L2 = 16.70 cm (desired length)

ΔT = ? (change in temperature)

Using the linear expansion equation, we can rearrange it to solve for ΔT:

ΔT = ΔL / (αL)

Substituting the given values:

ΔT = (L2 - L1) / (αL1)

ΔT = (16.70 cm - 11.82 cm) / [(22.85 cm - 11.82 cm) / (100.0°C - 0.0°C)]

ΔT ≈ 13.52°C

Therefore, the temperature when the column has a length of 16.70 cm is approximately 13.52°C.

(b) Let's calculate the temperature when the column has a length of 20.50 cm.

Given:

L1 = 11.82 cm (length at 0.0°C)

L2 = 20.50 cm (desired length)

ΔT = ? (change in temperature)

Using the linear expansion equation:

ΔT = ΔL / (αL)

Substituting the given values:

ΔT = (L2 - L1) / (αL1)

ΔT = (20.50 cm - 11.82 cm) / [(22.85 cm - 11.82 cm) / (100.0°C - 0.0°C)]

ΔT ≈ 47.18°C

Therefore, the temperature when the column has a length of 20.50 cm is approximately 47.18°C.

Learn more about temperature here

https://brainly.com/question/27944554

#SPJ11

To determine the magnetic field vector (b⃗) that deflects a wire to a 12° angle, we can use the formula for the magnetic force on a current-carrying wire. By rearranging the formula, we can solve for the magnetic field vector b⃗. Given a wire with a mass per unit length of 60 g/m and a current of 7.0 A, we can calculate the required magnetic field vector.

The magnetic force on a current-carrying wire in a magnetic field is given by the formula F⃗ = I * L⃗ × b⃗, where I is the current, L⃗ is the vector representing the length and direction of the wire, and b⃗ is the magnetic field vector.

In this case, we want to find the magnetic field vector that deflects the wire to a 12° angle. To do this, we can rearrange the formula to solve for b⃗:

b⃗ = F⃗ / (I * L⃗)

Given that the wire has a mass per unit length of 60 g/m, the force experienced by the wire due to the magnetic field is equal to the weight of the wire, which is given by the equation F⃗ = mg⃗, where m is the mass per unit length and g⃗ is the acceleration due to gravity.

Plugging in the values, F⃗ = (60 g/m) * (9.8 m/s²) * L⃗, where L⃗ is the length and direction of the wire. Since the wire is deflected to a 12° angle, we can use trigonometry to determine the vertical component of the length vector, which is L⃗ sin(12°).

Finally, substituting the values into the formula for b⃗, we have:

b⃗ = [(60 g/m) * (9.8 m/s²) * L⃗] / (7.0 A * L⃗ sin(12°))

Simplifying this expression will give us the required magnetic field vector b⃗ that deflects the wire to a 12° angle when the current is 7.0 A.

To learn more about magnetic field vector : brainly.com/question/31866032

#SPJ11

To determine the average density of the NaCl crystal, we can use the formula:

Density = (Mass of Na + Mass of Cl) / Volume

The volume of the crystal can be calculated by considering the spacing of adjacent atoms. Since the spacing is given in nanometers (nm), we need to convert it to meters (m) for consistent units.

Given:

Spacing of adjacent atoms = 0.282 nm = 0.282 × 10^(-9) m

Mass of Na = 3.82 × 10^(-26) kg

Mass of Cl = 5.89 × 10^(-26) kg

Now, let's calculate the volume:

Volume = (Spacing of adjacent atoms)^3

Volume = (0.282 × 10^(-9) m)^3

Next, we can calculate the density:

Density = (Mass of Na + Mass of Cl) / Volume

Density = (3.82 × 10^(-26) kg + 5.89 × 10^(-26) kg) / [(0.282 × 10^(-9) m)^3]

Evaluate the above expression to obtain the average density of the NaCl crystal.

To know more about NaCl crystal refer here

https://brainly.com/question/32361850#

#SPJ11

NaCl crystal consists of sodium and chloride ions which interact in a 1:1 ratio confined in a face-centered cubic (FCC) structure. The inter-atomic separation is 0.282 nm. The ions are held together in place by ionic bonds, showing solid NaCl's stoichiometry.

The atoms in a NaCl crystal are arranged in a face-centered cubic (FCC) structure due to the ionic bonds that hold them together. The inter-atomic separation distance is 0.282 nm. Sodium and chloride ions interact in a 1:1 ratio, and their masses are 3.82*10^-26 kg (Na) and 5.89*10^-26 kg (Cl) respectively.

The crystal structure formed by these ions consists of octahedral holes occupied by sodium ions, while chloride ions form the FCC cell. Their interactions are balanced by electrostatic attraction, which also requires significant energy to break. Each unit cell of the crystal lattice contains both sodium and chloride ions, thus maintaining the 1:1 stoichiometry required by the formula NaCl.

The dimensions, structure, and interactions within a NaCl crystal are critical in understanding the properties of this common salt, including its unique crystalline structure, stability, and behavior in chemical reactions.

https://brainly.com/question/33427242

The standard reduction potential belongs to the group of potentials known as standard electrodes or standard cells. The difference in voltage between the cathode and anode is known as the standard cell potential.

Thus, It is actually the difference in potential from hydrogen that is determined when the standard reduction and oxidation of chemical species.

A voltmeter can be used to measure the potential difference from hydrogen in a galvanic cell that has a half-cell of the unidentified chemical species on one side and a SHE on the other.

The unidentified chemical species is reduced while hydrogen is oxidized when the standard reduction potential is calculated, and the unidentified chemical species is oxidized while hydrogen is reduced when the standard oxidation potential is calculated.

Thus, The standard reduction potential belongs to the group of potentials known as standard electrodes or standard cells. The difference in voltage between the cathode and anode is known as the standard cell potential.

Thus, The standard reduction potential belongs to the group of potentials known as standard electrodes or standard cells. The difference in voltage between the cathode and anode is known as the standard cell potential.

Learn more about Cell potential, refer to the link:

https://brainly.com/question/10470515

#SPJ1

True. White light, consisting of a broad spectrum of frequencies, ranging from 4.00×1014 Hz to 7.90×1014 Hz, is incident on a barium surface.

When white light, which is composed of different colors corresponding to various frequencies, falls on a barium surface, the interaction between light and matter occurs. In this case, the barium atoms in the surface will absorb and re-emit certain frequencies of light due to their atomic structure.

The absorption and emission processes depend on the energy levels within the barium atoms. The incident white light will contain frequencies within the range of 4.00×1014 Hz to 7.90×1014 Hz, which includes visible light. As a result, the barium surface will selectively absorb and reflect specific frequencies, leading to the perception of different colors by our eyes.

For more information on frequency visit: brainly.com/question/29739263

#SPJ11

The pair of names in which the two people's fields are the most different is D. Isaac Newton and Galileo Galilei. Isaac Newton is primarily known for his contributions to the fields of physics and mathematics.

Galileo Galilei is renowned for his contributions to the fields of physics and astronomy. He played a crucial role in the scientific revolution and made significant advancements in the study of motion, particularly through his experiments with falling objects and the development of the telescope.. While both Newton and Galileo made significant contributions to the fields of physics, their specific areas of focus and the nature of their achievements were different. Newton's work emphasized theoretical concepts and mathematical formalism, while Galileo's work was rooted in experimental observations and the refinement of scientific instruments.

learn more about Galileo Galilei here

https://brainly.com/question/4086591

#SPJ1

The buoyant force is the same on each block, regardless of the material they are made of.

The buoyant force experienced by a submerged object is determined by the displaced volume of fluid and the density of the fluid.

In this case, the submerged objects are a 1-cubic centimeter block of lead and a 1-cubic centimeter block of aluminum. Since the volume of both blocks is the same, the displaced volume of fluid will be the same for both blocks.

The buoyant force acting on an object can be calculated using the formula:

Buoyant force = Volume of fluid displaced * Density of the fluid * Acceleration due to gravity

Since the displaced volume of fluid is the same for both blocks and the density of the fluid is the same, the buoyant force will be the same for the lead block and the aluminum block.

Therefore, the buoyant force is the same on each block, regardless of the material they are made of.

To know more about buoyant force refer here

https://brainly.com/question/20165763#

#SPJ11

a. Aperture - (3) diameter
b. Resolution - (4) ability to distinguish objects that appear close together in the sky
c. Focal length - (2) distance from lens to focal plane
d. Chromatic aberration - (6) rainbow-making effect
e. Diffraction - (7) smearing effect due to sharp edge
f. Interferometer - (1) several telescopes connected to act as one
g. Adaptive optics - (5) computer-controlled active focusing

Focal length is a property of an optical system, such as a lens or a mirror, that determines the distance between the lens or mirror and its focal point. It is a measure of the optical power of the system and is defined as the distance from the center of the lens or mirror to the point where parallel light rays converge or appear to diverge from.

The focal length is usually expressed in millimeters (mm) and is an important characteristic of a lens or mirror that affects the image quality and magnification. A lens or mirror with a shorter focal length will have a wider field of view and produce a larger image, while a lens or mirror with a longer focal length will have a narrower field of view and produce a smaller image.

Visit here to learn more about Focal length brainly.com/question/31755962
#SPJ11

The rotational angles 90 degree and 270 degree the x component of the vector equal to zero, hence option A, and C are correct.

If the tail of a vector is fixed to the origin of an x, y-axis system. Originally, the vector points along the +x-axis and has a magnitude of 12 units. As time passes, the vector rotates counterclockwise.

For the vector to be non changed:

When the vector is along the y-axis, the angle at which it may be rotated so that the x component is zero.

The rotational angles can be 90 degree and 270 degree, in which the x component of the vector equal to zero.

Learn more about vector, here:

https://brainly.com/question/28653237

#SPJ1

By reducing the sound intensity level by 30.0 dB using special sound-reflecting windows, you have reduced the sound intensity by a factor of 10^(30/10) or 10³.

By reducing the sound intensity level by 30.0 dB using special sound-reflecting windows, you have reduced the sound intensity by a factor of 10^(30/10) or 10³.

The decibel (dB) scale is logarithmic, and a reduction of 10 dB corresponds to a decrease in sound intensity by a factor of 10. Therefore, a reduction of 30 dB corresponds to a decrease in sound intensity by a factor of 10^3 (10 * 10 * 10).

In other words, the sound intensity is reduced by 1,000 times (or 1/1,000 of the original intensity) when using these sound-reflecting windows, providing a significant reduction in traffic noise for a music lover living on a busy street.

Learn more about sound intensity level

brainly.com/question/14695848

#SPJ11

If the Earth were a 12-inch-diameter basketball, the Sun would be positioned around 139,500 miles distant from the Earth basketball in order to preserve scale.

Multiply the scale factor by the diameter of the basketball (12 inches) to determine the distance at which the model of the Sun should be positioned:

Model Sun distance = Scale factor × Basketball diameter

Model Sun distance = 11,625 × 12

= 139,500 miles

Thus, the Sun would be positioned around 139,500 miles distant from the Earth basketball in order to preserve scale.

Learn more about Sun, here:

https://brainly.com/question/5042194

#SPJ4

Answer:

The spring is compressed by approximately 0.79 meters from its equilibrium position.

Pumice is a volcanic rock that floats in water. The density of pumice compared with water is (a) less.

Pumice is an extremely porous volcanic glass that resembles froth and has long been used as an abrasive in cleaning, polishing, and scouring solutions. Additionally, it is used as a lightweight aggregate in plaster, poured concrete, insulation, acoustic tiling, and precast masonry units. Pyroclastic igneous rock known as pumice was almost fully liquid at the time of effusion and cooled too quickly for it to crystallise. The dissolved vapours were abruptly released when it hardened, causing the entire material to surge up into a froth that quickly solidified.

To know more about Pumice

https://brainly.com/question/30401467

#SPJ11

The shortest time for a car to accelerate from 0 to 60 mph (miles per hour) depends on various factors such as the power and torque of the engine, the weight of the car, transmission type, tire grip, and road conditions.

Assuming a car with a powerful engine, good grip tires, and a weight of around 3000 pounds on a dry, level road, it would take approximately 5-7 seconds to reach 60 mph from a standstill.

This is just an estimate, and the actual time may vary depending on the specific car and the conditions in which it is being driven.

Additionally, it's important to drive safely and obey traffic laws, rather than attempting to achieve the fastest possible acceleration time.

Read more about Friction.

https://brainly.com/question/28356847

#SPJ11

The solid cylinder and cylindrical shell will hit the ground at the same time. This is because the mass of the cylinders, radius, and height above the ground are all the same for both the solid cylinder and cylindrical shell.

Additionally, the axles are frictionless, so there is no difference in the amount of rotational inertia between the two cylinders. Therefore, the acceleration due to gravity will be the same for both cylinders and the blocks tied to them. This means that they will both fall at the same rate and hit the ground at the same time.

Both the solid cylinder and the cylindrical shell have the same mass, radius, and are turning on frictionless horizontal axles. Since the blocks attached to them have the same mass and are held at the same height, the key factor in determining which block hits the ground first is the moment of inertia of each cylinder.


Therefore, the block attached to the solid cylinder will hit the ground first.

To know more about  cylindrical shell visit:-

https://brainly.com/question/32139263

#SPJ11