Answers
Answer:
(a) 3.33 mol Bi
(b) 140. g CO
Explanation:
Step 1: Convert 775g to moles
Bi Molar Mass - 208.98 g/mol × 2 = 417.98 g/mol
O Molar Mass - 16.00 g/mol × 3 = 48.00 g/mol
775g Bi₂O₃ ÷ 465.98 g/mol = 1.66316 mol Bi₂O₃
Step 2: Find the conversion from Bi₂O₃ to Bi
1 mole of Bi₂O₃ equals 2 moles of Bi
Step 3: Use Dimensional Analysis
1.66316 mol · [tex]\frac{2 \hspace{2} mol \hspace{2} Bi}{1 \hspace{2} mol \hspace{2} Bi_2O_3}[/tex] = 3.32632 mol Bi
3.32632 mol Bi ≈ 3.33 mol Bi (3 significant figures)
Step 4: Find the conversion from Bi₂O₃ to CO
1 mole of Bi₂O₃ equals 3 moles of CO
Step 5: Use Dimensional Analysis
1.66316 mol · [tex]\frac{3 \hspace{2} mol \hspace{2} CO}{1 \hspace{2} mol \hspace{2} Bi_2O_3}[/tex] = 4.98948 mol CO
Step 6: Find molar mass of CO and convert moles to grams
C - 12.01 g/mol
O - 16.00 g/mol
4.98948 mol CO · 28.01 g/mol = 139.775 g CO
139.775 g CO ≈ 140. g CO (3 significant figures)
Related Questions
If the density of a diamond is 3.5g/cm3, what would be the mass of a diamond whose volume is 0.5 cm3?
Answers
Answer:
1.75 g
Explanation:
as density ×volume =mass
3.5×0.5=mass
mass=1.75 g
plz mark as brainliest if it helps
The mass of the diamond which has a density of 3.5g/cm3 is [tex]1.75kg[/tex]
Density is given as:[tex]3.5g/cm3[/tex]having a volume of [tex]0.5 cm^3[/tex]But we know that Density can be regarded as the the ratio of mass to that of volume of that particular object.let us represent this mathematically as;[tex]Density=[/tex] [tex]\frac{ mass }{ volume }[/tex]we can make Mass the subject of the formula to find the mass[tex]Mass= ( Density * volume)[/tex]Then let us substitute the give value, then we will have[tex]= ( 3.5*0.5)[/tex][tex]= 1.75kg[/tex]
Therefore, the mass is[tex]1.75kg[/tex]
Learn more at:https://brainly.com/question/14940265?referrer=searchResults
In the density of a liquid activity, the graph had an intercept. If you were to make a similar graph using metal blocks, would the graph have an intercept?
Answers
Answer:
NO
Explanation:
It would be difficult to plot a line of best fit on the scattered graph of the activities of metal blocks as the activities would almost be the same horizontally on the graph and an attempt to draw/determine an intercept will be almost impossible. The line of best fit is usually drawn to determine the relatedness/correlation of the variables.
Drawing intercept for the activities of the liquid is easier because a line of best fit can be easily placed between the clustered liquid activities on the scattered plot.
Describe the evidence for Mercury having a molten iron core
Answers
I need helpp!!!!!!!!!
Answers
1
Select the correct answer.
Which statement about the relationship between laws, hypotheses, and theories is true?
A.
Laws that remain true over an extended period of time are considered theories.
B.
A theory that holds true for a long time is considered a law.
C.
If a law is not contradicted after a lot of testing, it may be considered a hypothesis.
D.
If a hypothesis is not contradicted after a lot of testing, it may be considered a law.
Answers
Answer:
the answer is D
Explanation:
Given that the specific heat of chromium is 0.455J/g∙K find the final temperature after 35.9J of energy is removed from 11.7g of chromium at 28.5°C.
Answers
Answer:
[tex]T_2=35.2\°C[/tex]
Explanation:
Hello,
In this case, since the heat is computed in terms of mass, specific heat and temperature as follows:
[tex]Q=mCp(T_2-T_1)[/tex]
In such a way, for the given heat, we obtain the following temperature:
[tex]T_2=T_1+\frac{Q}{mCp}\\ \\T_2=28.5\°C+\frac{35.9J}{11.7g*0.455\frac{J}{g\°C} }\\ \\T_2=35.2\°C[/tex]
Best regards.
What is the purpose of keeping a running list of new vocabulary words?
A. To make it easier to decode the word when you see it again
B. To provide an easy-to-remember picture associated with the word
C. To make it easier to remember and use new words
D. To allow you to critically evaluate every new word you come
across
Shjajfbcjahaixhfjwnzhsbsjxjdbxbsjzjfbwnznsnwnnsndndnwnbwjshsbdbdndnndndndbxbxnsnsn
Answers
Answer:
C
Explanation:
As C would be the wisest choice as being able to remember and use more words than the average human not only opens up your vocabulary but also your chances of writing a better essay using said words.
Answer:
C
Explanation:
Makes it easier to remember and use new words
which of the following is not true about water ? *
Water has a freezing point of 0℃
Water is chemically stable and makes a good energy source
Water has a density of 1 g/mL
water is polar
water has a boiling point of 100℃
Water is less dense as a solid
Answers
how do you convert wavelength to frequency?
Answers
Answer:
Image result for how do you convert wavelength to frequency?
How do you calculate energy from wavelength?
Convert your wavelength into meters.
Divide the speed of light, ~300,000,000 m/s, by the wavelength in m. This gives you the wave's frequency.
Multiply the frequency by Planck's constant, 6.626 x 10-34. The result is the waves energy in joules (J).
Explanation:
2. You are tasked with calculating the average weight of kindergartners in a class of
21 students. Their weights range from a low of 40.5 lbs to a high of 58.6 lbs.
How many significant figures should be in the average that you find?
Answers
The transfer of thermal energy by particles moving through a fluid (either a
gas or a liquid) is called?
Answers
Answer:
Convection
Explanation:
Convection is the transfer of thermal energy by particles moving through a fluid.
Answer:
convection
Explanation:
trust
Is condensation phyiscal change
Answers
Answer:
condensation is the change of the physical state of matter from the gas phase to the liquid phase :)
Explanation:
Answer:
Yes.
Explanation:
Condensation is the change of physical state of matter from gas to liquid.
What angle is needed to spread 4 bonds as far apart as possible?
Answers
Answer:
109°
Explanation:
According to Valence Shell Electron Pair Repulsion Theory, electron pairs on the valence shell of the central atom of a molecule must be positioned as far apart in space as possible to minimize repulsion between valence shell electron pairs.
The shape of a molecule depends on the number and type of electron pairs on the valence shell of its central atom. Lone pairs generally cause more repulsion than bond pairs of electrons.
The ideal bond angle for a molecule with four bonds is 109° which corresponds to a tetrahedral geometry. This enables the four bonds to spread as far apart in space as possible.
Why are atoms usually portrayed as spheres when most orbitals are not spherically shaped?
a. The shape of an atom depends on the shape of its nucleus, not on the shape of its orbitals.
b. The shape of an atom depends on the shape of the outer orbital which always spherical
c. The shape of an atom is obtained by superimposing all of its orbitals.
d. The shape of an atom is not important so it is easier to treat atoms as spheres.
Answers
Answer:
The shape of an atom is not important so it is easier to treat atoms as spheres.
Explanation:
In considering the shape of an atom, we do not consider the shape of the orbitals individually.
Hence, we do not seek to determine the exact shape of the atom, rather we simply treat the atom as spheres. Even though most orbitals are not spherically shaped.
Science is based primarily on peoples opinions and views of the subject matter.
True or false
Answers
Answer:
False
Explanation:
Science is not based on primarily on peoples opinions and views of the subject matter whereas science is based on empirical observations and research for its validity.
Science aims to find answers to human questions related to the natural world through their research observation and experiments. Scientists and researchers provide valid proof of human questions so that people can trust them.
Science can change people's opinions regarding the natural world with valid proof and observational theories but science is not based on people's opinion.
Hence, the given statement is "false".
Which of the following experimental methods cannot be used to measure the rate of a reaction? Group of answer choices measurement of the absorbance of a colored reactant with time measurement of the change in the partial pressure of a gas-phase product over time measurement of the equilibrium concentration of an acidic product via titration with a strong base measurement of the absorbance of a colored product with time measurement of the change in the partial pressure of a gas-phase reactant over time
Answers
Answer:
measurement of the equilibrium concentration of an acidic product via titration with a strong base
Explanation:
The rate at which a reaction proceeds refers to how quickly the reaction is occuring. In other words, it is how quickly the reactants are changing to the products. According to the question, the rate of a reaction can be measured experimentally using the reactants' or products' properties e.g volume, pressure etc.
Since reactions must involve reactants and products, the manner in which either the reactants or products changes over time can be measured. For example; measurement of the absorbance of a colored reactant or product with time, measurement of the change in the partial pressure of a gas-phase reactant or product over time can be used.
However, a measurement of the equilibrium concentration of an acidic product via titration with a strong base will not tell us how fast the reaction is going because it is in an EQUILIBRIUM state i.e. reaction is occuring at an equal rate
For a trip to the Moon, a rocket must lift off from
Earth's surface. Suppose it takes 5 minutes for the
rocket to reach a velocity of 6,000 m/s upward from
a starting velocity of 0 m/s. What is the rocket's
acceleration?
Answers
Answer:
20 m/s^2
Explanation:
given,
final velocity (v) = 6000m/s
initial velocity (u) = 0m/s
time taken (t) = 5 minutes
= 5×60second
= 300second
acceleration(a) = ?
we know that,
a = (v-u)/t
= (6000-0)/300
= 20 m/s^2
write a brief short note on translation and transcription?
Answers
Answer:
Transcription is when you make a copy of the RNA from DNA. This is how the mRNA can leave the nucleus which exists to the cytoplasm and into ribosomes where protein synthesis occurs. Translation is what happens after transcription and this is where protein synthesis occusrs in the ribosomes/endoplasmic reticulum.
Explanation:
Akito is warming a test tube over a Bunsen burner. He heats it too much and the glass breaks.
Which best describes what Akito should do first?
Ο Ο Ο Ο
O get paper towels
O change lab stations
turn off the burner
remove his contacts
Answers
Answer:
c
Explanation:
Consider this equilibrium reaction at 400 K. Br2(g)+Cl2(g)↽−−⇀2BrCl(g)Kc=7.0 If the composition of the reaction mixture at 400 K is [BrCl]=0.00415 M, [Br2]=0.00366 M, and [Cl2]=0.000672 M, what is the reaction quotient, ???? ? ????= How is the reaction quotient related to the equilibrium constant, Kc, for this reaction?
Answers
Answer:
Q = 7.0
Q = kc. The reaction is in equilibrium
Explanation:
Based on the reaction:
Br₂ + Cl₂ ⇄ 2BrCl
Equilibrium constant of the reaction, kc, is the ratio of equilibrium concentrations products over reactants powered to its reaction coefficient:
Kc = [BrCl]² / [Br₂] [Cl₂] = 7.0
Now, reaction quotient, Q, is write as the same Kc but the concentrations are actual concentrations:
Q = [BrCl]² / [Br₂] [Cl₂]
Replacing:
Q = [0.00415M]² / [0.00366M] [0.000672M]
Q = 7.0
Now, as Q = Kc = 7.0, the reaction mixture is in equilibrium
In which field(s) is knowledge about how science works important?
A. Medicine
B. All of these are correct
C. Law
D. Politics
E. Agriculture
Answers
Answer:B
Explanation:
Group of molecules which do not contain carbon
O enzymes
O inorganic compounds
O buffer
O elements
Answers
1- Science that deals with the identification and quantification of the components of material systems
A)Analytical Science
B)Biochemistry
C)Organic Chemistry
D) Inorganic Chemistry
Q1-(30 Marks) Choose the correct answer
Answers
Answer:
Analytical science
Explanation:
Which four practices are examples of how humans use science?
A. Making decisions that help humans survive
OB. Developing technologies that help humans thrive
C. Developing explanations based on facts
D. Imagining entertaining stories that explain observations
O E. Gathering facts that explain natural events
Answers
Answer:
A. Making decisions that help humans survive
B. Developing technologies that help humans thrive
C. Developing explanations based on facts
E. Gathering facts that explain natural events
Explanation:
The above are examples of the practices of how humans use science.
Science has been of tremendous help to humans in making decisions that make humans survive and develop technologies that help humans thrive. It has helped to gather and develop explanations that are based on facts. It has helped to explain natural events.
What percentage of light hits Earth’s surface directly?
3 percent
5 percent
31 percent
47 percent
Answers
Answer: yall trust me on this one, i took one for the team. The answer is "C" or you can say 31 percent. boys get me 50 thanks.
Explanation:
The percentage of sunlight that hits the Earth's surface directly is 31 percent. The correct option is C.
What is sunlight?Sunlight is the electromagnetic radiation transferred by the sun.
The sun is 93 million away from the earth, so it takes eight and half minutes to reach the sunlight to the earth.
Only 30 to 34 percent of light reaches the earth, and the remaining lights are reflected back by clouds and the earth itself.
Thus, the correct option is C, 31 percent.
Learn more about sunlight
https://brainly.com/question/27183506
Helium is more reactive than magnesium.
TRUE
FALSE
Answers
Answer: FALSE
Explanation: Magnesium is more reactive.
Hope this helps!
Answer:
False
Explanation:
Magnesium is more reactive.
an object has a mass of 14g and a volume 3.5 mL. what is the density of the object ?
Answers
Given :
Mass of object , M = 14 g .
Volume of object , V = 3.5 mL .
To Find :
The density of the object .
Solution :
Density of an object is given by :
[tex]Density=\dfrac{Mass}{Volume}\\\\\rho=\dfrac{M}{V}\\\\\rho=\dfrac{14}{3.5}\ g/mL\\\\\rho=4\ g/mL[/tex]
Therefore , the density is 4 g/mL .
Hence , this is the required solution .
What particle(s) of an atom would NOT found in the nucleus?
Electrons
proton
neutron
neutrons and electrons
Answers
Answer:
Electrons, they circle the nucleus.
Discuss the effect of changing the flow tube radius on flow rate.
Answers
Answer:
The flow rate of a tube is the volume of fluid flowing through the tube per unit time. The flowrate is proportional to the product of the velocity of the fluid through the tube, and the cross-sectional area of the tube.
That is
Q = AV
where
A is the area of the tube
V is the velocity of the tube
The cross-sectional area of the tube is proportional to the radius of the tube. From the above equation, we can deduce that if the velocity of the fluid flowing through the tube is held constant, the flowrate of the fluid through the tube will increase with an increase in the radius of the tube, and it will decrease with a decrease in the radius of the tube.
Write balanced molecular and net ionic equations for the following metathesis (double displacement) reactions, if they occur. If no reaction occurs, write NR on the product side. All reactants are aqueous. Phase subscripts must be included to indicate what products stay in solution (aq), and what products precipitate (s).
a. zinc acetate + sodium carbonate
b. barium nitrate + sodium sulfate
c. lead (II) nitrate + sodium sulfate
d. zinc acetate + sodium sulfate
e. barium nitrate+ potassium iodide
f. lead (I) nitrate+ potassium iodide
g. zinc acetate + potassium iodide
Answers
Answer:
attached below is the required solution
Explanation:
A) Zinc acetate + Sodium carbonate
B) barium nitrate + sodium sulfate
C ) lead ( II ) nitrate + sodium sulfate
D) Zinc acetate + sodium sulfate
E) barium nitrate + potassium iodide
F) Lead ( I ) nitrate + potassium iodide
G) Zinc acetate + potassium iodide
A net ionic equation shows the ions that underwent change in a reaction hence it excludes the spectator ions.
A metathesis reaction is one which the cations exchange anion partners in the products. A general example of a methathesis reaction is AX + BY ---> AY + BX.
The molecular and net ionic equation for the reactions are;
1) Zn(CH3COO)2(aq) + Na2CO3(aq) -----> ZnCO3(s) + 2CH3COONa(aq)
Net ionic equation; Zn^2+(aq) + CO3^2-(aq) ------> ZnCO3(s)
2) Ba(NO3)2(aq) + Na2SO4(aq) ------> BaSO4(s) + 2NaNO3(aq)
Net ionic equation; Ba^2+(aq) + SO4^2-(aq) ------> BaSO4(s)
3) Pb(NO3)2(aq) + Na2SO4(aq) ------> PbSO4(s) + 2NaNO3(aq)
Net ionic equation; Pb^2+(aq) + SO4^2-(aq) ------> PbSO4(s)
4) Zn(CH3COO)2(aq) + Na2SO4(aq) ------> ZnSO4(s) + 2CH3COONa(aq)
Net ionic equation: Zn^2+(aq) + SO4^2-(aq) ------> ZnSO4(s)
5) Ba(NO3)2(aq) + 2KI(aq) ------> 2KNO3(aq) + BaI2(aq)
There is no net ionic equation for this reaction.
6) Pb(NO3)2(aq) + 2KI(aq) -------> PbI2(s) + 2NaNO3(aq)
Net ionic equation: Pb^2+(aq) + 2I^-(aq) -----> PbI2(s)
7) Zn(CH3COO)2(aq) + 2KI(aq) -----> ZnI2(aq) + 2CH3COOK(aq)
There is no net ionic equation for this reaction
Learn more: https://brainly.com/question/1340582