Answer:
The answer is 3.
Explanation:
There were 3 building codes in the 2000's.
Before the international building code was published in 2000, 3 model building codes were in use.
What is international building code?It is a critical tool for protecting public health and safety by protecting against hazards associated with the built environment.
It focuses on the development and implementation of innovative materials that meet or exceed public health and safety objectives.
The following are some examples of model building codes that are commonly used in the United States: The International Code Council's International Building Code.
The National Fire Protection Association's NFPA 5000 standard. The National Fire Protection Association's National Electrical Code.
Council formed by the merger of three model code agencies (ICBO, SBCCI, and BOCA) in 1994; published the International Building Code (IBC) in 2000. Every three years, the IBC (International Building Code) is updated.
Thus, there were 3 models building code.
For more details regarding international building code, visit:
https://brainly.com/question/28526076
#SPJ2
Which of the following describes what all team members should be given?
respect and advancement
attention and accurate information
respect and support
attention and equal opportunity
help i need to find out how to replace a water hose in a truck
Explain why the following scenario fails to meet the criteria for proper reverse engineering.
Terrence has just taken apart a 1982 microwave to see how it works. As he took apart the microwave, he spread its components all over the floor. He did not document the process, so now he has no idea how to reassemble it, and he is confused about how all of the pieces function together.
Answer:
he must document or remember the order he took it apart so he put it back together
Explanation:
Answer:
This is because he did not make a product teardown sheet in order to know how to put the product back together. He also did not keep his materials in a nice area that was kept up and away from chaos.
Explanation:
which type of irrigation fluid is typically used for endoscopic procedures using monopolar electrosurgery
An irrigation fluid that is used for endoscopic procedures using monopolar electrosurgery is Glycine 1.5% solution.
What is an irrigation fluid?This is a fluid that is used for dilation during the process of endoscopic surgery.
What the fluid does is that it helps to wash away dirt from the operating area after it has dilated the area.
Read more on irrigation fluid here: https://brainly.com/question/13246758
why are bananas engineering
to use your turn signals legally you should
Answer:
100ft before turning or changing lanes
Which of the following describes design components that deal with the outward appearance or beauty of an object?
outputs
visual analysis
structural designs
aesthetic elements
Aesthetic elements are the components that are added to the design to be considered pleasing to the eye.
What are aesthetic elements?They are those characteristics of an object that deal with the outward appearance or beauty of an object, that is, they are those elements that make it valuable, appreciable, relevant or transcendent.
To do this, the qualities must be in the design of the object but must also be perceived by the consumer, the aesthetic being what we like to perceive in objects.
Therefore, we can conclude that aesthetic elements are the components that are added to the design to be considered pleasing to the eye.
Learn more about aesthetic elements here: https://brainly.com/question/24568271
Answer:
aesthetic elements
Explanation:
drivers education :Anything that draws your mind off driving is
Answer:
A distraction or a saftey hazard.
Explanation:
That is all i can think of to answer your question.
-Hope this helps!
Justin:)
Conclude from the scenario below which type of documentation Holly should use, and explain why this would be the best choice
Holly is going to use the reverse engineering process to deconstruct an Apple computer. She would like to see how the computer works, diagram its components, and document how the product functions.
The type of documentation that Holly should use is to generate a graphic representation of the Apple system.
What is Reverse Engineering?This refers to the methodical act of dismantling an object in order to learn how it works or was constructed.
Hence, the use of a graphic representation of the Apple system which Holly wants to reverse engineer is the best option because it uses a standard document UML notation.
Read more about reverse engineering here:
https://brainly.com/question/25682883
Answer:
?
Explanation:
49. Your Field of Vision is?
Answer:
d. what you can see directly ahead of you
Explanation:
field of vision (definition) = what we see when we look directly ahead with our head straight
Hope this helps!
- profparis
In fuel oil piping systems, all exterior above-grade fill piping shall be __________ when tanks are abandoned or removed.
Answer:
Removed
Hope this Helps!
Airbags may deploy in the
of the passenger or
driver, or from the
of the vehicle.
Answer:
dashboard
Explanation:
in the dashboard of the passenger seat.
Curtain airbags are side-impact airbags that are designed to protect passengers and drivers from a side impact crash and even help prevent being thrown from the vehicle if the vehicle rolls over after being struck from the side.
What are curtain airbags?For many years, the side curtain airbag has received higher safety ratings in passenger cars and minivans. However, automakers have recently discovered new ways to adapt side curtain technology for niche applications, particularly in high-risk vehicles. Convertible and SUV drivers, for example, already benefit from side curtain protection and rollover-specific security.
Curtain airbags can also be extremely useful as subcompacts become more popular. Despite consumer and regulatory concerns about the structural integrity of small cars, a new microcar will use curtain airbags to protect its passengers' necks. If curtain airbags are proven to be effective in rear collisions, they could play a role in improving public perception of small and efficient vehicles.
Learn more about airbags on:
brainly.com/question/2607849
#SPJ2
Lesson 5: 1) How does the magnetic field change when we add another magnet to the system? Use: repulsive force, attractive force, magnetic field forces, and magnet
Answer:
wouldn't be 2x more powerful with another magnet
Is it safe to keep a cylinder next to the actual wending or cutting operation. True or false
Which of the following is not a type of simple machine?
A. pair of pliers
B. ramp
C. wheel and axle
D pulley
Answer:
The correct Answer A.pair of pliers
Please help me on this it’s due now
Answer:
road closures on deliver routes.. i think..
Select three changes that should be included in design documentation.
time
cost analysis
team members
decisions
materials
past products
The three changes that should be included in design documentation are:
TimeTeam membersMaterialsWhat is design documentation?Design documentation can be defined as a strategic process that involves gathering all the written documents and resources pertaining to the design of a product or system are put together.
In this context, the three (3) changes that should be included in design documentation include the following:
TimeTeam membersMaterialsRead more on design documentation here: https://brainly.com/question/4360514
Outline how effective brainstorming should be set up so that it does not go off-track or alienate anyone.
Answer: How to brainstorm
Start with a warm-up exercise. To begin a brainstorming session productively, start with a warm-up exercise. ...
Visualize your goal. ...
Document the discussion. ...
Think aloud. ...
Emphasize variety. ...
Encourage every idea. ...
Collaborate instead of criticizing. ...
Ask questions.
Explanation:
Describe why the scenario below fails to meet the criteria for proper reverse engineering.
Meghan has been assigned to reverse engineer a skyscraper. She has created three different original skyscraper sketches. She has hired a team to assist her with a totally different building, and she has instructed them not to look at documents or information from existing structures.
The scenario does not meet the criteria for proper reverse engineering because reverse engineering is the reverse process of assembly.
What does reverse engineering do?Reverse Engineering is the name given to the process of exploring an object that consists of “deconstructing” it. In other words, dismantling an object to study it. For example, when a child takes the toy apart to understand how it works, he is practicing Reverse Engineering.
With this information, we can conclude that the scenario does not meet the criteria for proper reverse engineering because this type of engineering is the reverse process of assembly.
Learn more about reverse engineering in brainly.com/question/10175918
SUPER EASYY!!!!!
LIST 3 HAZARDS FOR SOLDERING AND HOW TO PREVENT THEM
Answer:
The best way to prevent soldering fume inhalation is to install and ensure the proper maintenance of a local exhaust ventilation (LEV) system at each soldering station. These vacuum-like ventilation units remove the bulk of these fumes right at their source, before you or nearby coworkers have the chance to inhale them.
Explanation:
What should you always do before making any alignment
adjustments?
A) Perform necessary repairs to worn or damaged suspension components.
B) Decide whether you should adjust the front or the rear first.
C) Road test the vehicle over a bumpy road.
D) Check for DTC's.
Back
Next
Answer:
A) Perform necessary repairs to worn or damaged suspension components
What is the tolerance for number 4?
Answer: 0.02 units or 20±0.02 units or 19.98-20.02 units
(all are the same)
Explanation:
says on the sheet. Unless otherwise stated 0.XX = ±0.02 tolerance
2. The framing member that forms the side of
a rough opening for a window or door is
the
a. trimmer stud
b. header
c. soleplate
d. cripple
Answer:
a. trimmer stud
Explanation:
Vertical framing members that flank each side of a rough opening and support the header are also know as trimmer studs in many parts of the country.
What is the tolerance of number 4?
Answer:
Answer: ±0.02 units or 20±0.02 units or 19.98-20.02 units depending on how they prefer its written (typically the first or second one)
Explanation:
says on the sheet. Unless otherwise stated 0.XX = ±0.02 tolerance
(based on image sent in other post)