Based on what you learned in this video what minerals make up Rhyolite?

Partial melting of rock in subduction zones is aided by the addition of water, which is (are) released by sediments on top of the subducting plate

However, this partial melting is aided by the addition of water, which is released by sediments on top of the subducting plate. Water is a volatile substance that lowers the melting temperature of rocks, allowing them to partially melt even at lower temperatures. The water is released from the sediments on top of the subducting plate as it gets squeezed and heated during the subduction process. The water then migrates into the overlying mantle wedge, where it interacts with the mantle rocks and triggers partial melting. This partial melting generates magma, which rises to the surface and forms volcanoes. Therefore, the addition of water is crucial for the formation of volcanic arcs in subduction zones. The other options, air and sand, do not have the same effect as water in aiding the partial melting of rock in subduction zones.

Know more about Subduction zones here:

https://brainly.com/question/13788626

#SPJ11

The most likely reason that a smaller earthquake in Virginia was felt over a larger distance, as compared to a larger earthquake in California, is that the bedrock in Virginia is less rigid than in California.

When an earthquake occurs, seismic waves radiate outward from the epicenter, causing vibrations in the surrounding earth. The extent to which these vibrations are felt by people and structures depends on a variety of factors, including the strength and duration of the seismic waves, the distance from the epicenter, and the characteristics of the underlying geology. In general, softer and less rigid materials, such as sedimentary rock, soil, and unconsolidated sediments, transmit seismic waves more efficiently than harder and more rigid materials, such as igneous or metamorphic rock. This means that earthquakes in areas with softer geology may be felt over larger distances than earthquakes of similar magnitude in areas with harder geology. In the case of the Virginia earthquake, the region has a relatively low density of faults and is located on the eastern edge of the North American tectonic plate, which has older and more stable crust compared to the more seismically active Pacific Plate. The bedrock in Virginia is generally softer and less rigid than the rock in California, which could account for why the smaller earthquake was felt over a larger distance.

Learn more about bedrock here:

https://brainly.com/question/867715

#SPJ11

Differential weathering is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition. Therefore the correct option is option C.

Differential weathering is a process in which various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.

This can result in the formation of unusual and distinctive landforms, such as the hoodoos in Bryce Canyon National Park, where harder and more resistant rock layers stand above softer, more easily weathered layers.

The differential weathering occurs because different rocks have different physical and chemical properties that affect how they respond to environmental forces such as wind, water, and temperature changes.Therefore the correct option is option C.

For such more question on environmental:

https://brainly.com/question/23946590

#SPJ11

The brightness of a star decreases with distance from Earth, following an inverse square law. Therefore, if star A is twice as far away as star B, the apparent brightness of star A will be 1/4th (2^(-2)) of the apparent brightness of star B.

However, the intrinsic brightness of both stars is the same. Therefore, the ratio of their intrinsic brightness will be the same as the ratio of their apparent brightness. So, the apparent brightness ratio of 1/4 translates to an intrinsic brightness ratio of 1/1. Therefore, star A and star B have the same intrinsic brightness, even though star B appears 4 times brighter than star A to our eyes due to its closer distance.

The setup of six corridors through which a significant proportion of European freight passes, despite covering only a small percentage of the region's roads, is a strategic decision aimed at optimizing the transportation of goods across Europe.

These corridors were chosen based on their geographic location, connectivity to major ports and cities, and potential for improving the efficiency of freight transport.

By concentrating the majority of freight traffic on these corridors, it is possible to streamline the movement of goods, reduce congestion and travel time, and lower transport costs.

This approach also facilitates the implementation of sustainable transport solutions, such as intermodal transport, which involves the use of multiple modes of transportation to transport goods.

Overall, the establishment of these corridors highlights the importance of efficient and sustainable freight transport in supporting Europe's economic growth and competitiveness, while minimizing the environmental impact of transportation.

To know more about freight refer here:

https://brainly.com/question/30789296#

#SPJ11

Igneous rocks of felsic composition have lower density and higher viscosity relative to mafic igneous rocks. This is because felsic rocks are composed of a higher proportion of silica, aluminum, and potassium, which form minerals such as quartz, feldspar, and mica.

These minerals have a lower density than the iron and magnesium-rich minerals that make up mafic rocks like basalt and gabbro. The higher silica content of felsic rocks also makes them more viscous, meaning they resist flowing and are more likely to trap gas bubbles during cooling and solidification. This can lead to explosive volcanic eruptions, as seen in the case of Mount St. Helens in 1980. Mafic rocks, on the other hand, are more fluid and tend to produce less explosive eruptions due to their lower viscosity. Overall, the properties of felsic and mafic igneous rocks are influenced by their chemical composition, and these differences can have important implications for volcanic hazards, mineral resources, and geological processes.

Know more about Igneous rocks here:

https://brainly.com/question/23555197

#SPJ11

The color and temperature of a star are corelated. Blue stars are hotter than red stars, hence their surfaces are hotter. Therefore the option D, The blue star has a hotter surface temperature than the red star is correct.

Astronomers study stars based on their color. The surface temperature of a star determines its color and radiation type. Red stars have a surface temperature of 2,000–4,000 Kelvin, while blue stars have a surface temperature of 10,000–50,000 Kelvin. Thus, a blue star is hotter than a red star.

Stars' physical attributes depend on their surface temperatures. A star's luminosity—the total energy it emits per unit of time—is closely connected to its surface temperature. Surface temperature also impacts a star's spectral lines, which can reveal its chemical and physical attributes.

To know more about stars,

https://brainly.com/question/1237382

https://brainly.com/question/30716005

When gazing towards the south, the initial sight in the dawn would be the sun shimmering on the left---in the east.

As time passed, it could have been noticed that the heat-filled star was moving from its canting origin to traverse in a traced arc along the azure sky.

This is due to the spin of planet Earth around its own axis that causes the change in path of the sun. Its resultant course is rising in the east, passes through the backdrop of heaven during the daytime, and sets immaculately in the west.

Read more about compass here:

https://brainly.com/question/26706653

#SPJ1

The point A is the PPC that represents the economy after the war

PPC, or Production Possibility Curve (also dubbed as the Production Possibility Frontier), is a graphical representation that discloses the limit of blend of two commodities which can be produced with restricted assets and technology in a particular society.

The PPC conveys the compulsory concessions that must be made when deciding to manufacture one item rather than another, thus emphasizing the concept of opportunity cost.

This curve is habitually diagrammed as a faintly-descending line where one good can be located on the X-axis, then correspondingly accompanied by the other good situated on the Y-axis.

Read more on PPC here:https://brainly.com/question/20995982

#SPJ1

Answer:

3rd green dot down

An intermediate rock with two distinct grain sizes is known as an intermediate porphyritic rock. This type of rock is characterized by having a fine-grained matrix or groundmass with larger crystals, known as phenocrysts, dispersed throughout. The phenocrysts are typically formed earlier than the matrix and can be of various minerals, such as feldspar, quartz, or mica.

The term "porphyry" comes from the Greek word "porphyra," which means "purple." This is because the first porphyritic rocks that were discovered had a purple-red color. However, porphyry can be found in various colors depending on the minerals that make up the rock.

Intermediate porphyritic rocks are classified based on their composition, which falls between felsic and mafic rocks. Felsic rocks are rich in silica, aluminum, potassium, and sodium, while mafic rocks are rich in magnesium and iron. Intermediate rocks have a balance of both types of minerals.

In conclusion, the rock name for an intermediate rock with two distinct grain sizes is intermediate porphyritic rock. This rock type is formed by the cooling and crystallization of magma or lava and is commonly found in volcanic and plutonic environments.

Learn more about rock here:

https://brainly.com/question/19930528

#SPJ11

The term that describes how a mineral reflects light from its surface is called "luster." Luster is an important property used by geologists and mineralogists to identify and classify minerals.

It refers to the way light interacts with the surface of the mineral, giving it a distinct appearance. There are two main types of luster: metallic and non-metallic. Metallic luster refers to minerals that have a shiny, metal-like appearance, similar to metals such as gold, silver, or copper. Non-metallic luster encompasses a variety of appearances, including glassy (vitreous), pearly, silky, greasy, or dull. Glassy luster, for example, is seen in minerals like quartz, where the surface reflects light like glass. Luster is just one of the properties used to identify minerals, along with other factors like hardness, streak, crystal structure, and cleavage. By observing these properties, geologists and mineralogists can accurately determine the type of mineral and better understand its formation and potential uses. In summary, the term you are looking for is "luster," which describes how a mineral reflects light from its surface. This property is crucial in the identification and classification of minerals, helping professionals determine their type and potential applications.

Learn more about luster here

https://brainly.com/question/30617168

#SPJ11

The mass movement event near Point Fermin in California in 1929 is an example of a "landslide".

A landslide is a type of mass movement event that involves the movement of rock, earth, or debris down a slope or incline. Landslides can occur due to a variety of factors, including erosion, weathering, earthquakes, and human activities such as mining or construction. In the case of the Point Fermin landslide, a half-mile long segment of the coast slid slowly seaward along inclined bedding planes. The slipping material remained largely intact, but the movement caused significant damage to infrastructure in the area, including a sewer line and a gas main.

Overall, landslides can have significant impacts on human communities and infrastructure, and it is important to monitor and manage the risks associated with these events to minimize their impact.

Learn more about landslide here:

https://brainly.com/question/16151931

#SPJ11

Shear stress moves material parallel to a surface. Shear stress is a type of stress that occurs when forces are applied parallel to a surface or in opposite directions along a surface. Option A is correct.

Shear stress is a type of stress that occurs when forces are applied parallel to a surface or in opposite directions along a surface. It is a form of stress that causes a material to deform or to move parallel to the direction of the applied force. When a material is subjected to shear stress, the forces acting on the material are not applied uniformly across the material, but are instead applied in a way that causes the material to twist or deform. This can result in the material sliding or shearing along a plane parallel to the direction of the applied force.

Shear stress is an important concept in many fields, including geology, engineering, and physics. In geology, shear stress is a key factor in the deformation and movement of rocks along faults. In engineering, shear stress is a critical factor in the design of structures and materials that are subjected to forces that cause deformation or movement. In physics, shear stress is used to describe the behavior of fluids and other materials that flow or deform under the influence of external forces.

Learn more about surface here:

https://brainly.com/question/1569007

#SPJ11

The ruler's power. The architecture of the Ancient Near East was often characterized by monumental structures that were built to express the power and authority of rulers.

Controlled space was used to convey the idea that the ruler had dominion over the land and the people. For example, ziggurats, which were towering structures with multiple levels, were built as symbols of the ruler's power and as a means of demonstrating their connection to the gods. Additionally, palaces were designed to be impressive and imposing, with grand courtyards and ornate entrances, to convey the ruler's importance and power.

Learn more about impressive here:

https://brainly.com/question/14591053

#SPJ11

Other than sand dunes in a desert environment, you would expect to find well-rounded and sorted sand deposits in environments where there is water movement and erosion.

A) Delta: Deltas are formed at the mouth of rivers where they meet an ocean, lake, or other body of water. The river deposits sediment, including sand, as it slows down in the body of water. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the delta environment.

B) Beach: Beaches are formed from the accumulation of sediment, including sand, that is transported by waves and currents along the shoreline. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the beach environment.

C) Lake: Lakes can have sand deposits that are well-rounded and sorted, especially in areas where there is wave action and currents. The sand may be transported to the lake from nearby rivers or streams or may be formed from the erosion of the lake shore.

D) Glacier: Sand deposits associated with glaciers may not be well-rounded, as the glaciers can transport a variety of sediment sizes and shapes. However, some sand deposits associated with glaciers may be sorted due to the water movement and erosion that occurs as the glacier melts.

E) Reef: Sand deposits may be found in coral reef environments, where waves and currents transport sediment onto the reef. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the reef environment.

Learn more about erosion: https://brainly.com/question/3852201

#SPJ11

Answer:

While all plastics are not equal with respect to ease of recycling, the most easy-to-handle favorites are polyethylene terephthalate (PET) and high-density polyethylene (HDPE). These are the most commonly recycled plastics and have SPI code identification numbers “1”and “2”, respectively.

Hope this helps :)

Pls brainliest...

Answer:

arête

Explanation:

An arête is a jagged ridge that remains when cirques form on opposite sides of a mountain.

The "mega-blister" that developed along the flank of Mount St. Helens in early April was the result of magma intrusion. This process occurred when molten rock, or magma, from deep within the Earth's mantle made its way into the crust, causing a swelling or bulging effect on the surface.

The term "mega-blister" is used to describe this large, dome-like protrusion that formed on the side of the volcano. Magma intrusion can cause significant stress on the surrounding rock layers and contribute to the weakening of the volcanic structure. In the case of Mount St. Helens, the magma intrusion led to a series of earthquakes, which further destabilized the volcanic edifice. This ultimately culminated in the catastrophic eruption on May 18, 1980. During the eruption, the north flank of Mount St. Helens collapsed, unleashing a massive landslide and a lateral blast that devastated a large area surrounding the volcano. The eruption also released a massive ash cloud that affected the entire Pacific Northwest region and beyond. In summary, the "mega-blister" on Mount St. Helens was the result of magma intrusion, which led to the weakening of the volcanic structure and eventually its catastrophic eruption. Understanding such geological processes can help scientists monitor and assess volcanic hazards in the future.

Learn more about Mount St. Helens here

https://brainly.com/question/13620918

#SPJ11

Taking a moment to think about how the Colorado River has evolved through time, let's focus on how changing base level and stream incision created landforms, such as incised meanders and rincons, and arrange these events accordingly from oldest to youngest:

1. A stream migrates laterally across its floodplain, developing meanders. This is the initial stage where the stream is flowing across a relatively flat surface and begins to create sinuous curves.

2. The base level of the stream is lowered by crustal uplift and the river begins to incise downward. As the base level drops, the stream starts to cut deeper into the underlying rock, creating incised meanders.

3. Incised meanders form as a result of the river cutting into the bedrock. These are the deep, curving channels that are seen in the landscape after the stream has cut down into the rock.

4. A rincon forms by the cutoff of an incised meander, which shortens the river. This occurs when the river erodes through the narrow neck of a meander, bypassing the curve and leaving the abandoned channel as a rincon.

To recap, the order of events from oldest to youngest is:
1. A stream migrates laterally across its floodplain, developing meanders.
2. The base level of the stream is lowered by crustal uplift, and the river begins to incise downward.
3. Incised meanders form.
4. A rincon forms by the cutoff of an incised meander, which shortens the river.

To read more about Colorado River click here

https://brainly.com/question/13556556

#SPJ11

1. A stream migrates laterally across its floodplain developing meanders. 2. A rincon forms by the cutoff of an incised meander, which shortens the river. 3. The base level of the stream is lowered by crustal uplift and the river begins to incise downward. 4. Incised meanders form.

So, the events arranged from oldest to youngest are:
A stream migrates laterally across its floodplain developing meanders. A rincon forms by the cutoff of an incised meander, which shortens the river. The base level of the stream is lowered by crustal uplift and the river begins to incise downward. Incised meanders form.
Oldest Event to Youngest Event:
1. A stream migrates laterally across its floodplain, developing meanders.
2. The base level of the stream is lowered by crustal uplift, and the river begins to incise downward.
3. Incised meanders form as the river continues to cut deeper into the landscape.
4. A rincon forms by the cutoff of an incised meander, which shortens the river.
5. The stream terminates at a lake, which is its new base level.

To learn more about floodplain  click here

brainly.com/question/17366465

#SPJ11

A blueschist facies is associated with a high-pressure, low-temperature environment. This occurs because blueschist facies rocks are formed during subduction, where one tectonic plate is pushed under another.

Blueschist facies is associated with high-pressure, low-temperature environments typically found in subduction zones where oceanic crust is forced beneath continental crust. The high-pressure conditions result from the weight of the overlying rock and the low-temperature conditions occur because the oceanic crust is relatively cold when it enters the subduction zone. These conditions cause minerals to form under high pressure and low temperature, resulting in the characteristic blue color of blueschist.


In this process, the rocks experience high pressure from the overlying material, while the temperature remains relatively low since they do not get close enough to the heat source (Earth's mantle). The characteristic blue color of the minerals in these rocks, such as glaucophane, gives the facies its name.

Learn more about subduction zones here:

brainly.com/question/13788626

#SPJ11

The reason for the pacific ocean holding five times as many buoy stations as the Atlantic could be due to several factors. All the above

One possible reason is that the plate boundaries in the Pacific are convergent, which causes more earthquakes.

The higher frequency of earthquakes in the Pacific could lead to a higher demand for buoy stations to monitor seismic activity and provide early warning systems for tsunamis.

Another possible reason could be the size of the two oceans. While the Atlantic Ocean is larger in terms of surface area, the Pacific is larger in terms of volume, which could require more buoy stations for monitoring.

Additionally, the historical occurrence of tsunamis could also play a role, with both oceans experiencing significant events, but the Pacific perhaps having a higher frequency or greater impact.

Ultimately, a combination of these factors could contribute to the difference in the number of buoy stations between the two oceans.

To know more about pacific ocean refer here:

https://brainly.com/question/14705357#

#SPJ11

Complete question is:

The pacific ocean holds five times as many buoy stations as the atlantic. select all the possible reasons for this occurrence. group of answer choices

A) The plate boundaries in the pacific are convergent and cause more earthquakes

B) The atlantic ocean is larger historically,

C) The atlantic ocean has experienced more tsunamis the pacific ocean is larger historically,

D) The pacific ocean has experienced more tsunamis

A kettle hole is a steep depression in a glacial drift deposit.  this is that kettle holes are formed when a block of ice from a glacier becomes buried in sediment, then melts, leaving a depression in the ground.

Kettle holes form when a block of ice, separated from the main glacier, becomes partially buried in glacial drift (a mix of rock, soil, and other materials carried and deposited by glaciers). As the ice block melts, it leaves behind a depression in the drift material, creating a kettle hole. These depressions can fill with water, forming kettle lakes or ponds.
a kettle hole is the term used to describe the steep depression found in glacial drift deposits, which results from the melting of isolated ice blocks. kettle holes are common features of glacial landscapes and are important for understanding past glacial activity.

to know about kettle hole visit:

https://brainly.com/question/30031867

#SPJ11

After being transported to the New World on the Middle Passage, slaves were most frequently sent to work on plantations in the Caribbean, Brazil, and the southern colonies of North America.

The Caribbean was a major destination for slaves due to the large number of sugar plantations in the region. Brazil also had a thriving sugar industry as well as large coffee and tobacco plantations.

In North America, slaves were sent primarily to work on cotton, tobacco, and rice plantations in the southern colonies, including Virginia, South Carolina, and Georgia. Slaves were also sent to other parts of the Americas, such as Mexico and Peru, to work in mines or on haciendas.

Overall, the locations where slaves were sent were determined by the demands of the global economy and the specific crops and resources that were being produced in each region.

To know more about slaves refer to-

https://brainly.com/question/16747534

#SPJ11

Slaves were most frequently sent to locations such as the Caribbean islands, Brazil, and the southern colonies of present-day United States.

After being transported to the New World on the Middle Passage, slaves were most frequently sent to locations such as the Caribbean islands, Brazil, and the southern colonies of present-day United States, including places like Virginia, South Carolina, and Georgia.

https://brainly.com/question/31855989

#SPJ12

The two terms associated with Egyptian funerary architecture are Serdab and Mastaba.

Serdab is an enclosed chamber found in ancient Egyptian tombs, which housed a statue of the deceased. This statue was believed to serve as a resting place for the ka, or spirit, of the deceased.

A mastaba, on the other hand, is a type of ancient Egyptian tomb that is rectangular in shape with sloping sides and a flat roof. It was made out of mud bricks and had an underground burial chamber where the body of the deceased was interred.

While the other terms listed (Celestory, Pylon temple, Hypostyle hall, and Axial plan) are all associated with various aspects of Egyptian architecture, they are not specifically related to funerary architecture.

Learn more about Mastaba here:

https://brainly.com/question/1816850

#SPJ11

(Option a, b, c, and d) All of the processes mentioned are ways by which metamorphism occurs. Metamorphism is the process of changing a rock's mineralogy, texture, or composition.

Due to physical and/or chemical changes caused by heat, pressure, or fluids. Increases in temperature (A) can cause changes in mineralogy and texture in a process called thermal metamorphism. Burial beneath great depths of rock (B) can cause an increase in pressure, which can also cause changes in mineralogy and texture in a process called regional metamorphism. Phase changes (C) occur when minerals change from one form to another due to changes in temperature and pressure. Shear at depth within a plate boundary (D) can cause rocks to deform and recrystallize in a process called dynamic metamorphism.

Learn more about changes here:

https://brainly.com/question/29515490

#SPJ11

Learning how to use seismic waves to predict volcanic eruptions is complex, since five different types of waves can be produced by numerous volcanic processes.

Seismic waves are waves of energy that travel through the Earth's interior and can be detected and measured by seismometers.

They are generated by a variety of sources, including earthquakes, volcanic eruptions, and human activities such as explosions and mining.

The five types of seismic waves are primary (P) waves, secondary (S) waves, Love waves, Rayleigh waves, and long-period (LP) waves.

Each type of wave behaves differently as it travels through the Earth's interior, and can provide information about the structure and composition of the Earth as well as the nature of the seismic source that produced it.

For such more question on volcanic:

https://brainly.com/question/1156480

#SPJ11

Without the monitoring and advance warning given for the Mount Pinatubo eruption in 1991, it is estimated that the death toll would have been significantly higher.

The eruption of Mount Pinatubo was one of the largest and most destructive volcanic eruptions of the 20th century, with ash and debris reaching as far as Vietnam and causing over 800 deaths.

However, the early warning systems put in place by the Philippine government and the US Geological Survey allowed for the evacuation of over 60,000 people living in the vicinity of the volcano, which greatly reduced the number of casualties.

It is estimated that without these measures, the death toll could have reached into the tens of thousands. The successful evacuation efforts during the Mount Pinatubo eruption serve as an important example of the importance of early warning systems and disaster preparedness measures in mitigating the impacts of natural disasters.

To know more about Mount Pinatubo  visit:

https://brainly.com/question/15419826

#SPJ11

Any hard, colorful mineral that has a brilliant or glassy luster is called a gemstone. Gemstones are highly valued for their beauty and rarity and are often used in jewelry and decorative items.

Some popular gemstones include diamonds, emeralds, rubies, sapphires, and topaz. The glassy luster of a gemstone is due to its smooth, reflective surface, which is formed as the mineral crystalizes. The color of a gemstone is determined by the presence of certain minerals or elements within the crystal structure. For example, the presence of chromium gives rubies their red color, while iron gives amethyst its purple hue. Gemstones can be found in a variety of locations around the world, including mines, rivers, and beaches. Due to their value, gemstones are often subject to mining and trade regulations to prevent exploitation and ensure ethical sourcing.

Learn more about gemstones here

https://brainly.com/question/24448445

#SPJ11