based on the dosages a patient receives what level of precision should a syringe have to ensure that the patient receives the proper dosage

Explanation:

When 6.38 moles of O2 and 9.15 moles of Al react, the ratio of aluminum to oxygen is 9.15/6.38 = 1.434. This shows that all of the oxygen is consumed before the aluminum and when the reaction ends the reactant aluminum is left. The number of moles of Al2O3 formed is approximately 4.25 moles.

Taking into account the definition of density and Archimedes' principle, the beginner bowling ball will float on the water.

But first it is neccesary to know that density is a quantity referred to the amount of mass in a certain volume of a substance or a solid object.

In other words, the density is the relationship between the weight (mass) of a substance and the volume that the same substance occupies.

The expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

In this case, a beginner's bowling ball has a mass of 4.9 kg and a volume of 5.4 liters. This is:

Replacing in the definition of density:

[tex]density=\frac{4900 g}{5400 mL}[/tex]

Solving:

density=0.907 [tex]\frac{g}{mL}[/tex]

On the other hand, Archimedes' principle says that an object immersed in a liquid experiences an upward vertical force equal to the weight of the volume of the dislodged liquid.

The sinking or floating of an object is determined by its density with respect to that of the liquid in which it is submerged.

Considering water as the liquid where the object is submerged in this case, an object with a higher density than water will sink. In contrast, an object with a lower density than water will float.

In this case, considering that water has a density of 1 [tex]\frac{g}{mL}[/tex], the bowling ball for beginners has a lower density. This indicates that, having a lower density than water, the object will float.

In summary, the beginner bowling ball will float on the water.

Learn more about density:

Answer:

What is the difference between the crust and lithosphere? The crust (whether continental or oceanic) is the thin layer of distinctive chemical composition overlying the ultramafic upper mantle. ... The lithosphere is the rigid outer layer of the Earth required by plate tectonic theory.

Explanation:

Answer:

water and salt

Explanation:

A neutralization reaction is when an acid and a base react to form water and a salt and involves the combination of H+ ions and OH- ions to generate water. The neutralization of a strong acid and strong base has a pH equal to 7.

Hope this helps

PLS MARK BRAINLIEST

Answer:

At 100 °C (the boiling point of water at standard atmospheric pressure), water molecules in the liquid state have a density of 0.9584 g/cm3. This means that there are 3.21 × 1022 water molecules packed into 1 cm3 and the average distance between water molecules is 3.91 × 10-8 cm.

This is what I found. Hope it helps!

Answer:

It's from the quation:

[tex] \boxed{ \mathsf{ \underline{2K} +\underline{2 H_2O} \rightarrow \:\underline{2}KOH + H_2 }}[/tex]

(How did I know?)

I learnt it while studying the elements of group 1.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

K, here, is Potassium. It's position in the periodic table is Group 1, Period 4.

Valance electrons of elements of this group contribute to the valency of the group's elements I.e.,

valency of Alkali metals is 1!

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

What are hydroxides?

Hydroxides of an element comprises one atom each of oxygen and Hydrogen bonded together, acting as an anion, the hydorxide anion — OH-.

Example:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

In the question, The reactants are missing but the products are known, that are, Potassium Hydroxide and water.

Keeping the above mentioned property in mind, the reactants come clear as Potassium(K) and Cold water(H2O).

that makes the equation:

[tex] \mathsf{K + H_2O \rightarrow \: KOH + H_2 }[/tex]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

For an equation to be balanced, the number of atoms of each elements on both side of the equation must be equal.

Number of atoms of each element on the LHS:

(subscript in front of an atom represents its number of atoms in the compund)

Number of atoms of each element on the LHS:

The number of Hydrogen atoms on boths sides is NOT balanced!

Hit and trial method:

If we add a "2" in front of K, H2O and KOH

[tex] \mathsf{ \underline{2K} +\underline{2 H_2O} \rightarrow \:\underline{2}KOH + H_2 }[/tex]

Number of atoms on both the sides become equal.

(TIP: This comes thru practice:/. but main point is even out the oxygen and Hydrogen atoms first. like if it's 3 multiply it by 2 and you get an even number, I.e., 6)

Number of atoms of each element on the LHS:

Number of atoms of each element on the LHS:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Hence, the balanced form of the equation is:

[tex] \boxed{ \mathsf{ \underline{2K} +\underline{2 H_2O} \rightarrow \:\underline{2}KOH + H_2 }}[/tex]

Answer:2 hours

This range of temperatures is often called the "Danger Zone." Never leave food out of refrigeration over 2 hours. If the temperature is above 90 °F, food should not be left out more than 1 hour. Keep hot food hot—at or above 140 °F.

Explanation:

Answer:

I think that it would be better to have smaller cells because smaller cells takes less energy to transport waste and generally more efficient to control than larger cells. It is better to have smaller cells because larger and fewer cells takes up more nutrients, but doesn't cover as many surface area. In the end, smaller cells are more efficient, cover more surface area, and moves faster than bigger cells.

Explanation:

I hope that this is the kind of answer you were looking for!

Explanation:

A. Hydrogen bonding is present in CS2 but not in CO2.

B. CS2 has greater dipole moment than CO2 and thus the dipole-dipole forces in CS2 are stronger.

C. CS2 partly dissociates to form ions and CO2 does not. Therefore, ion-dipole interactions are present in CS2 but not in CO2.

D. The dispersion forces are greater in CS2 than in CO2.

PLS MARK BRAINLIEST :D

Explanation:

See the table above. Periods at the side, metals at the top, non metals to the right, group to the right of that

Answer:

So the asnwer is 66666666666666666666666666666666666666666666666666666666666666666666666666666666666668888844444444444444444443299997832........................................................4563ygfdjuzgu3456655555555555555555555553444446445444444555554

Explanation:

Answer:

8

Explanation:

Hope this helps you :)

Answer:

4200

Explanation:

4,000 * .8 + 5,000 * .2

The weighted average of lemonas with 80% GX model and 20 % GXL model is calculated using their mass percent and it is 4200.

What is  weighted average?

The weighted average is different from the normal average we use in maths. Let's X and Y be two number and their average be x+ y/2. That is the arithmetic mean.

The weighted average of lemonas is similar to the atomic weight of an element calculated from ist two isotopes where, the percentage abundance in earth and the mass of isotopes if given the weighted average is calculated as follows:

weighted average =  % abundance / 100 × mass of isotope 1 + % abundance / 100 × mass of isotope 2

In a similar way, the weighted average of lemonas of GX and GXL model is calculated as follows:

weighted average = ( 4000 lbs ×80/100 ) + ( 5000 lbs ×20/100)

                               = 4200 lbs.

Hence, the weighted average of lemonas if 80% are the GX model (4,000 lbs) and 20% are the GXL model is 4200 lbs.

To find more about weighted average, refer the link below:

https://brainly.com/question/28042295

#SPJ2

Answer:  Electrons

Explanation:

A chemical reaction usually only affects elctrons. A chemical reaction usually results in the electrons being transferred or shared. When sodium and fluorine react to produce sodium fluoride, a sodium electron is transferred to the fluorine to produce ionic bonds. This ionic bond exists between the sodium cation and fluoride (fluorine) anion.

Water has a density of 1.0 g/mL. A plastic cup floats when it is placed into a container of water as it is less denser than water.

Density is a key notion in physics and material science that quantifies how tightly packed a substance's particles or molecules are within a certain volume. It is a measure of the mass contained in a certain amount of space that gives useful information about the properties of various materials.

It is vital to highlight that density is a material attribute that remains constant regardless of sample size. A little piece of iron, for example, has the same density as a huge iron block, despite the larger block having more mass.

To know more about density, here:

https://brainly.com/question/29775886

#SPJ3

Answer:

The particle theory of matter is a model that describes the arrangement and movement of particles in a substance. The model is used to explain the physical properties of solids, liquids and gases. Particle arrangement and movement

Explanation:

Answer:

23: 6000560000000

24: 0.0015

25: 200

26: 0.0105

27: 600

28: 4023000

Explanation:

You have to move the decimal the same amount of times as the exponent says.

For example, like with the 6, you move it 2 decimals to the right (since it's positive), and the regular number would be 600.

Answer:

see explanation

Explanation:

number of moles = mass ÷ relative formula mass

e.g.

Calculate the number of moles of carbon dioxide molecules in 22 g of CO2.

Ar (relative atomic mass) of C = 12, Ar of O = 16

Mr (relative formula mass) of carbon dioxide = 12 + 16 + 16 = 44

number of moles = 22 ÷ 44 = 0.5 mol

Answer:

Example of a fusion dish: combination of smoked salmon wrapped in rice paper, with avocado, cucumber and crab sticks. Fusion cuisine is cuisine that combines elements of different culinary traditions that originate from different countries, regions, or cultures.

Answer:

b

Explanation:

deposition is the differentiates weathering from erosion

Answer:

nervous tissues

Explanation:

Nervous tissue is found in the brain, spinal cord, and nerves. It is responsible for coordinating and controlling many body activities. ... The cells in nervous tissue that generate and conduct impulses are called neurons or nerve cells. These cells have three principal parts: the dendrites, the cell body, and one axon

credits to the person who provided this info.

Answer:

8

Explanation:

It increases going up, because atom size is smaller, with greater energy levels; going right to left decreases, because they will have smaller charges when going through right to left.

Then, Calcium (Ca) is non-metal that reacts with Nitrogen (N), a non-metal. When 2 non-metal elements become a compound, it's covalent. Therefore, the bond between both of the elements are covalent.

When one mole of Na3PO4.3H2O is heated extensively, three moles of water are released.

The water molecules in Na3PO4.3H2O are called molecules of water of crystallization. These molecules are not covalently bonded to the Na3PO4 molecule. They are only loosely attached to the substance.

Strong heating will drive away these molecules of water of crystallization to give three moles of water in the product.

Hence, when one mole of Na3PO4.3H2O is heated extensively, three moles of water are released.

Learn more: https://brainly.com/question/14252791

Answer:

Metallic character increases down each Group of the Table as the outer electrons are further from the nucleus and require less energy for their removal. (a) metallic character decreases from left to right in each Period.

Explanation:

The metallic character increases down each Group on the periodic table.

The metallic character decreases from left to right in each Period.

learn about metallic character,

https://brainly.com/question/16940676

#SPJ2