The balanced chemical equation for the reaction between barium hydroxide, Ba(OH)₂ and HNO₃ to produce barium nitrate, Ba(NO₃)₂ is
Ba(OH)₂ + 2HNO₃ —> Ba(NO₃)₂ + 2H₂O
What is a chemical equation?Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to write the balanced equationBa(OH)₂ + HNO₃ —> Ba(NO₃)₂ + H₂O
There are 2 atoms of N on the right side and 1 atom on the left side. It can be balanced by writing 2 before HNO₃ as shown below:
Ba(OH)₂ + 2HNO₃ —> Ba(NO₃)₂ + H₂O
There are 4 atoms of H on the left side and 2 atoms on the right side. It can be balanced by writing 2 before H₂O as shown below
Ba(OH)₂ + 2HNO₃ —> Ba(NO₃)₂ + 2H₂O
Now, the equation is balanced
Learn more about chemical equation:
https://brainly.com/question/7181548
Please help !!!!! I need this for Chemistry class
Answer: Silver has the highest temp. change and water has the lowest temp. change.
Explanation:
According to the specific heat capacity, water has lowest specific heat and greatest is that of silver owing to their temperature differences.
What is specific heat capacity?
Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.It is different for different substances.
It is given by the formula ,
Q=mcΔT
Learn more about specific heat capacity,here:
https://brainly.com/question/29766819
#SPJ7
How are fluids used and controlled in manufactured devices?
Answer:
Fluid power systems perform work by a pressurized fluid bearing directly on a piston in a cylinder or in a fluid motor. A fluid cylinder produces a force resulting in linear motion, whereas a fluid motor produces torque resulting in rotary motion. Within a fluid power system, cylinders and motors (also called actuators) do the desired work. Control components such as valves regulate the system.
Riley took a train ride to Florida for vacation. It
took 67 hours to travel a distance of 1,546
kilometers. What was the speed of the train?
Answer: 23
I hope this helps! Have a good day! :)
A liquid has an empirical formula CCl2, and a boiling point of 1 21 oC. When vapourised, the gaseous compound has a density of 4.93 g/L at 785torr and 1 50oC. What is the molar mass of the compound and what is its molecular weight?
Based on the data given, the molar mass of the gas is 165.5 g/mol while the molecular weight of the gas is 165.5 amu
How can molar mass of a gas be obtained from density, temperature and pressure?The molar mass of a gas can be obtained from density, temperature and pressure using the formula below:
molar mass = density × molar gas constant × temperature/pressureMolar gas constant, R = R = 0.082 L.atm/mol/K.
Temperature = 150 °C = 423 K
Pressure = 785 torr = 1.033 atm
density = 4.93 g/L
molar mass of gas = 4.93 × 0.082 × 423/1.033
molar mass of gas = 165.5 g/mol
Then, molecular weight of the gas = 165.5 amu
Therefore, the molar mass of the gas is 165.5 g/mol while the molecular weight of the gas is 165.5 amu
Learn more about molar mass of a gas at: https://brainly.com/question/26215522
What happens to climate and weather over a summer?
Answer:
summers get hotter, and it can get more sticky or humid sometimes.
Explanation:
think of the seasons and the tempatures.
how is a convection current created.
Answer:
it is created by movement of molecules with higher energy upwards and the movement of molecules with lower energy downwards
Explanation:
please rate brainliest if I deserve
What is the power output of the stickman that pushes the box 5 meters in 3 seconds with a constant force of
12 N?
Answer:
20W
Explanation:
the power of qn object doing work w in a given time t is given by
p= w/t
What is the [H+] in a solution with a pH of 9.92
A) 1.2x10^-10 M
B) 9.9x10^-7 M
C) 4.9x10^-5 M
D) 1.1x10^-9 M
Answer:
Total flow: = 1000 cfm = 4.7 x 10 ml/sec. Stack Ht.: 2.7m (9 ft) ... 1.2x10-8. 6.4x10 7. C-14. 4.3x10 7. 1.0x10 5. 2.0x10 8. 1.1x10-8. Na-22. 1.3x1i dont know how to explain it
How many chromosomes do humans without chromosomal abnormalities have?
a)46
b)16
c)23
d)92
Answer:
A. 46
Explanation:
Human cells normally contain 23 pairs of chromosomes, for a total of 46 chromosomes in each cell .
How does tension affect the speed of a wave in a rope
The balanced equation for the aerobic reaction is:
Zn + 2 HCl → ZnCl2 + H2
How much hydrogen gas is produced from 5 g of HCl?
Answer:
1.85 g of hydrogen gas will form!
Explanation:
1. Write the balanced equation.
Zn
+
2HCl
→
ZnCl
2
+
H
2
2. Calculate the moles of
Zn
.
Moles of Zn
=
30.0
g Zn
×
1 mol Zn
65.38
g Zn
=
0.4589 mol Zn
3. Calculate the moles of
H
2
.
Moles of H
2
=
0.4589
mol Zn
×
2 mol H
2
1
mol Zn
=
0.9177 mol H
2
4. Calculate the mass of
H
2
.
Mass of H
2
=
0.9177
mol H
2
×
2.016 g H
2
1
mol H
2
=
1.85 g H
2
What is virtual water?
a. water used in the production of services and goods that consumers need and enjoy
b. water used in the production of services and goods that consumers need and enjoy
c. water that has not yet fallen to Earth as precipitation and cannot be seen
d. water with low oxygen levels as a result of agricultural runoff from fields and feedlots
Virtual water is water used in the production of services and goods that consumers need and enjoy.
So, option A is correct.
Why do humans need virtual water?Virtual water is very important as it helps us understand the dependencies our economies have on others' resources.
In addition with the water footprint, virtual water enables us to map out the dependencies and to identify when and where risks may lie, in terms of scarcity and pollution as it's implications is found for food security, economy and diplomacy.
Virtual water is not water that has not yet fallen to Earth as precipitation and cannot be seen.
Learn more about precipitation at: https://brainly.com/question/1783904
#SPJ1
Answer:
A and B are the same answer lol
Explanation:
which phrase explains the apparent motions of planets in the night sky?
The east to west daily motions of stars, planets, the Moon, and the Sun are caused by the rotation of the Earth on its axis. The Earth and all the planets revolve around the Sun on circular orbits. This produces the change in constellations observed from one time of year to the next.
hope it helps..!!!
How many moles are contained in 39 L of F2 gas at STP?
The number of moles contained in 39 L of F2 gas at STP is 1.74mol. Details on how to calculate number of moles can be found below.
How to calculate number of moles?The number of moles of a gas at STP can be calculated using the following formula:
PV = nRT
Where;
P = pressureV = volume n = number of moles R = gas law constantT = temperatureAt STP, the following applies:
T = 273KP = 1 atmR = 0.0821 Latm/molK1 × 39 = n × 0.0821 × 273
39 = 22.41n
n = 1.74mol
Therefore, the number of moles contained in 39 L of F2 gas at STP is 1.74mol.
Learn more about number of moles at: https://brainly.com/question/14919968
Which statement best describes how potassium bonds with bromine?
Potassium will donate an electron to bromine.
Bromine will donate an electron to potassium.
Bromine will donate seven electrons to potassium.
Potassium will share seven electrons with bromine.
Answer:
Potassium will donate an electron to bromine.
Explanation:
When potassium and bromine come together, the more electronegative bromine will snatch that solitary valence electron from the potassium atom. This will lead to the formation of the potassium cation, K+ , and the bromide anion, Br− .
hope it's helpful for you brother...
:-befrank
What volume of water is used to prepare a 3.5 M solution if 45 grams of Na2CO3 is used?
Answer:
121.3 ml
Explanation:
Mole wts
Na 22.989 x 2
C 12.011
O 15.999 x 3 total = 105.986
45 grams is 45/105.986 of a mole
45/105.986 in one liter would be .424584 M
.424585 mole / x liter = 3.5
x = .1213 liter = 121.3 ml
Which of the following statements accurately describes energy during the phase change of sublimation?
Energy is released.
Energy slows down.
Energy stays the same.
Energy is absorbed.
Answer: Your answer is D. Energy is absorbed.
Hope this helps!
Answer:
Energy is absorbed
Explanation:
For sublimation ....let's look at ice as an example
you must add calories (heat ) to melt the ice and then heat to produce water vapor .... sublimation requires energy input
Giving brainiest and 55 points!
Answer:
C
Explanation:
Hot and humid weather, accompanied by thunderstorms, is generally due to maritime tropical air massoriginate in the tropical oceans of both the hemispherescharacterized by high temperatures and are rich in moisture contentair mass during winter moves towards the land areas in the form of wind breeze affecting placesexperiences hot and humid weather during the summer seasonhow wind can affect the cooling of the air parcels
Answer:
Wind pushes air parcels even higher in the troposphere, where it is colder. The air parcels will then lose more energy and more rain can happen.
Explanation:
Answer:
Wind propels air packages upward into the troposphere, which is cooler. As a result, the air packets will lose more energy and more rain may fall.
Explanation:
In 1-2 sentences, describe what happens to atoms of a compound when a chemical reaction occurs
In a chemical reaction, bonds between atoms in the reactants are broken and the atoms rearrange and form new bonds to make the products.
The atoms get rearranged into new substances.
How many moles in 16 grams of oxygen?
Answer:
Half mole or 0.5 moles
__________________________________________________________
SolveOxygen has a molar molar mass of 32 g.
This means that O2 will have half that amount of grams, half-mole-substance.
6.022*10^23 molecules are present in one mole of any substance, so half it for O2.
6.022 × 10²³ [tex]-- >[/tex] 3.011 × 10²³
And simplified, that would make your answer 0.5 moles.
________________________________________________________
Questions?Ask in the comments box, please.
the reaction between calcium carbonate and hydrochloric acid which two of the products contain oxygen
Calcium carbonate (CaCO3) is a metal carbonate compound and reacts with hydrochloric acid (HCl) to produce carbon dioxide (CO2), calcium chloride (CaCl2) and water. You can see, carbon dioxide gas is released through the solution.
calcium carbonate and hydrochloric acid reaction
CaCO3 + HCl → CaCl2 + CO2 + H2O
The temperature of CI2 is changed from 836.06K to 625.06K.if it's new volume is 14.509L what was its original volume in liters
V1= 19.229L
Explanation:
V1/T1 = k
V1/836.06=14.509/625.06
V1/836.06= 0.023
V1 = 19.229L
The temperature of CI₂ is changed from 836.06K to 625.06K. If it's new volume is 14.509L then its original volume in liters was 19.4 L.
What is combined gas law?The combined gas law is the law of of gaseous state which is made by combination of Boyle's law, Charle's law, Avogadro's law and Gay Lussac's law.
It is a mathematical expression that relates Pressure, Volume and Temperature.
(P1 × V1)÷T1 = (P2 × V2)÷T2
We can also use the following relation-
PV = nRT
According to the question, Pressure is constant and we can write the formula as-
V1÷T1 = V2÷T2
T1 = 836.06 K
T2 = 625.06 K
V1 = ?
V2 = 14.509 L
V1 = 19.4 L
Therefore, The temperature of CI₂ is changed from 836.06K to 625.06K. If it's new volume is 14.509L then its original volume in liters was 19.4 L.
Learn more about combined gas law here:
https://brainly.com/question/30458409
#SPJ2
Propane gas, C3H8, burns in excess oxygen gas. When the equation for this reaction is correctly balanced and all coefficients are reduced to their lowest whole-number terms, the coefficient for O2 is
(A) 4 (B) 5 (C) 7 (D) 10 (E) 22
Answer:
5
Explanation:
First find the balanced equation for this rxn
C3H8 + 5O2 ====> 3 CO2 + 4 H2O
To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. The correct option is option A.
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
Propane gas, C[tex]_3[/tex]H[tex]_8[/tex], burns in excess oxygen gas. When the equation for this reaction is correctly balanced and all coefficients are reduced to their lowest whole-number terms, the coefficient for O[tex]_2[/tex] is 5.
C[tex]_3[/tex]H[tex]_8[/tex] + 5O[tex]_2[/tex] [tex]\rightarrow[/tex] 3 CO[tex]_2[/tex] + 4 H[tex]_2[/tex]O
Therefore, the correct option is option B.
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ2
a
Scientists have observed that the average surface temperature of the Earth has been increasing. This increase has
affected the oceans. Glaciers and ice sheets melt, and water from this melting process becomes part of the oceans.
The increasing temperature of the Earth's surface also warms ocean waters. As a result, the volume of the oceans
expands. These two events affect sea level.
What would happen to sea level if the average surface temperature trend that was observed since the 1960s
continues?
A) Sea level will rise, then will suddenly fall.
B) Sea level will remain the same.
C) Sea level will continue to fall.
D) Sea level will continue to rise.
Please select the best answer from the choices provided
O A
OB
Save and Exit
Next
Submit
Mark this and return
Answer:
D) Sea level will continue to rise
If you dissolve 8 grams NaOH in 0.1L of water what is the molarity of NaOH is solution? how many miles per liter do you have
Answer:
2 mol/L
Explanation:
molarity = moles/litres
NaOH = 23 + 16 + 1 = 40 g/mol
[tex] ? \: mol \: naoh \: = 8 \: g \: naoh \: \times \\ \frac{1 \: mol \: naoh}{40 \: g \: naoh} = 0.2 \: mol \: naoh[/tex]
molarity = 0.2 mol/0.1 L = 2 mol/L
Draw the organic products of the reaction shown. Draw hydrogens on oxygen and nitrogen where appropriate and draw charges where needed.
The products of chemical reactions are made up of the atoms of the reactants.
What are organic products?Organic products are chemical compounds that are obtained in a reaction in which there are organic compounds or elements as reactants. The basic types of organic chemical reactions are:
Addition reactions.Elimination reactions.Substitution reactions.Organic redox reactions.How to identify an organic product?To identify an organic product we must take into account that all organic chemical compounds have carbon in their composition.
Note: This question is incomplete because there is some information missing. However I can answer it based on my general prior knowledge.
Learn more about organic reactions in: https://brainly.com/question/9585105
what the symbol of sodium peroxide
Answer:
The Symbol Of Sodium Peroxide Is Na2O2
Answer:
Na2O2
Explanation:
I need a mnemonic for the reactivity server of metals please
Potassium
Sodium
Lithium
Calcium
Magnesium
Aluminium
Carbon
Zinc
Iron
Nickel
Tin
Lead
Hydrogen
Copper
Mercury
Silver
Gold
Platinum
Explanation:
Lithium Sodium Potassium group 1
Hydrogen proton +1
Iron Fe2+
The modern day three little pigs will need to choose from the following materials to build their energy efficient home: Vibranium, Beskar, and Gundarium
order for the three little pigs to be successful in building an insulated home that loses as little heat as possible, they will need to choose the materal with ta
highest specific heat, Cp-
Vibranium
Choosing the material with the highest specific heat capacity is ideal and true.
What is Specific heat capacity?This is defined as the quantity of heat needed to raise the temperature per unit mass.
Insulators have a higher specific heat capacity as it takes more time for them to absorb heat thereby making it ideal in building an insulated home.
Read more about Specific heat capacity here https://brainly.com/question/26866234