A balanced equation obey the law of conservation of mass, the mass can neither be converted nor be destroyed but can converted from one form to another. Here the given reaction indicates Haber process.
The ratio of the product of concentrations of the products to that of the reactants is also known as the concentration quotient and it is denoted as Q. At equilibrium Q becomes equal to the equilibrium constant.
The Haber process is:
N₂ + 3H₂ → 2NH₃
Q = [NH₃]² / [N₂] [H₂]³
Q = [0.0596]² / [0.600] [0.420]
Q = 0.014
Here Q is less than K, so the reaction proceeds in the forward direction.
To know more about Haber process, visit;
https://brainly.com/question/21867752
#SPJ1
Which acid/base pair will give an equivalence point above a pH of 7?
I am a little fuzzy on this topic. I know NH3 and HCL will be below 7. So... My thinking is the answer should be NaOH and CH3COOH?
Thanks for the help :)
Select the correct answer below:
A---NaOH and HCl
B---NH3 and HCl
C---NH3 and CH3COOH
D---NaOH and CH3COOH
NaOH and CH3COOH will give an equivalence point above a pH of 7. NaOH is a strong base and CH3COOH is a weak acid. During titration, as NaOH is added to the solution containing CH3COOH, the pH gradually increases due to the neutralization of the acidic protons of CH3COOH by the hydroxide ions of NaOH.
The equivalence point is reached when all the acid has reacted with the base, resulting in salt and water. At this point, the solution is neutral (pH 7). However, since CH3COOH is a weak acid, the initial pH of the solution is lower than 7, and it gradually increases as NaOH is added. Therefore, NaOH and CH3COOH form an acid/base pair that gives an equivalence point above a pH of 7.
Learn more about titration here:
https://brainly.com/question/31271061
#SPJ11
Answer: NH3 and HCl is the answer
write out the net-ionic equation for the precipitation reaction that will happen with hydrogenphosphate ion upon the addition of 1 m
The net-ionic equation for the precipitation reaction that occurs upon the addition of a 1 M solution of calcium ions to a solution containing hydrogen phosphate ions is Ca²⁺ + HPO₄²⁻ → CaHPO₄(s).
To write out the net-ionic equation for the precipitation reaction that occurs when hydrogen phosphate ion is combined with a 1 M solution of a cation, include the terms net-ionic equation, precipitation reaction, hydrogen phosphate ion, and 1 M solution.
Step 1: Identify the reacting ions.
In this case, the hydrogen phosphate ion is HPO₄²⁻
Step 2: Identify the cation that would form a precipitate with the hydrogen phosphate ion.
A common cation that forms a precipitate with hydrogen phosphate ion is calcium (Ca^(2+)). When added to a 1 M solution, the calcium ions will react with the hydrogen phosphate ions.
Step 3: Write out the molecular equation for the reaction.
Ca²⁺ + HPO₄²⁻ → CaHPO₄(s)
Step 4: Write out the net-ionic equation for the precipitation reaction.
Since there are no spectator ions in this reaction, the net-ionic equation is the same as the molecular equation:
Ca²⁺ + HPO₄²⁻ → CaHPO₄(s)
So, the net-ionic equation for the precipitation reaction that occurs upon the addition of a 1 M solution of calcium ions to a solution containing hydrogen phosphate ions is Ca²⁺ + HPO₄²⁻ → CaHPO₄(s)
To know more about precipitation reaction, refer
https://brainly.com/question/13016165
#SPJ11
Mercury spills
- Are not much of a concern since elemental mercury has such a low vapor pressure
- Are not much of a concern since mercury is primarily toxic by ingestion
- Must be cleaned up using special techniques
- Can effectively be swept up with a small broom and dustpan
Mercury spills must be cleaned up using special techniques. It is important to note that even though elemental mercury has a low vapor pressure, exposure to mercury vapor can still be harmful.
In addition, mercury is primarily toxic by ingestion, but it can also be absorbed through the skin. Therefore, it is recommended to use protective equipment, such as gloves and goggles, and to follow proper cleanup procedures to avoid exposure. Simply sweeping up a mercury spill with a small broom and dustpan is not recommended as it can spread the mercury particles and create a larger contamination area.
To learn more about Mercury click here https://brainly.com/question/4025230
#SPJ11
Primary amines with three or four carbon atoms are _____ at room temperature whereas higher ones are ______.
Primary amines are a class of organic compounds that contain a nitrogen atom bonded to two hydrogen atoms and a carbon atom. The carbon atom can be bonded to one, two, or three other carbon atoms.
The number of carbon atoms in the primary amine molecule can affect its physical properties, including its boiling and melting points.Primary amines with three or four carbon atoms are generally liquid at room temperature, while higher ones are solids. This is due to the difference in intermolecular forces between the molecules. In general, the larger the molecule, the stronger the intermolecular forces, which result in higher melting and boiling points. This is because the larger the molecule, the more atoms are present, and the greater the potential for intermolecular interactions such as van der Waals forces.Carbon atoms play a key role in determining the physical and chemical properties of organic compounds, including primary amines. The number and arrangement of carbon atoms in a molecule can affect its reactivity, solubility, and stability. The presence of multiple carbon atoms in a primary amine molecule can also result in the formation of different isomers, which have similar chemical properties but different physical properties. Overall, the number of carbon atoms in a primary amine molecule is an important factor in determining its behavior and properties.
Learn more about carbon here
https://brainly.com/question/27860158
#SPJ11
What mass of HI should be present in 0.200L of solution to obtain a solution with each of the following pH's?
pH=1.20
pH=1.75
pH=2.85
The mass of HI should be present in 0.200l of solution to obtain a solution with pH value's,
(a) pH value is 1.20 the mass is 1.08g
(b) pH value is 1.75 the mass is 0.0066g
(c) pH value is 2.85 the mass is 0.00012g
To solve this problem, we must determine the concentration of H+ ions in the solution using the pH of the solution and the dissociation constant of HI. The concentration of HI and the mass of HI required to make the solution may then be calculated.
The dissociation reaction for HI is:
HI(aq) ↔ H+(aq) + I-(aq)
The dissociation constant, Ka, for this reaction, is:
Ka = [H+][I-]/[HI]
This formula may be simplified by assuming that the starting concentration of HI is equal to the concentration of I- produced, which is equal to the concentration of H+ produced due to the reaction's 1:1 stoichiometry. This results in:
Ka = [H+]^2/[HI]
Solving for [H+], we get:
[H+] = sqrt(Ka*[HI])
Taking the negative log of both sides gives us the pH of the solution:
pH = -log[H+] = -log(sqrt(Ka*[HI]))
pH= -0.5*log(Ka) - 0.5*log([HI])
Rearranging this equation, we get:
[HI] = 10^(-(pH + 0.5*log(Ka)))/V
where V is the volume of the solution.
Now we can calculate the mass of HI required for each pH:
(a) For pH = 1.20:
Ka for HI is 1.3 x 10^-10. Substituting this value into the equation above, we get:
[HI] = 10^(-(1.20 + 0.5*log(1.3 x 10^-10)))/0.200L ≈ 0.0042 M
The mass of HI required is:
mass = concentration x volume x molar mass
= 0.0042 mol/L x 0.200 L x 127.91 g/mol
≈ 1.08 g
Therefore, approximately 1.08 grams of HI is required to prepare a solution with a pH of 1.20.
(b) For pH = 1.75:
[HI] = 10^(-(1.75 + 0.5*log(1.3 x 10^-10)))/0.200L ≈ 0.00026 M
mass = 0.00026 mol/L x 0.200 L x 127.91 g/mol ≈ 0.0066 g
Therefore, approximately 0.0066 grams of HI is required to prepare a solution with a pH of 1.75.
(c) For pH = 2.85:
[HI] = 10^(-(2.85 + 0.5*log(1.3 x 10^-10)))/0.200L ≈ 0.0000047 M
mass = 0.0000047 mol/L x 0.200 L x 127.91 g/mol ≈ 0.00012 g
Therefore, approximately 0.00012 grams of HI is required to prepare a solution with a pH of 2.85.
Learn more about Dissociation Reaction:
https://brainly.com/question/29411272
#SPJ4
A chemist needs to neutralize 349 L of HF solution that has a molarity of 3.6 M. She currently has an NaOH solution with a
molarity of 5.4 M. How many liters of her NaOH solution would she need to neutralize the HF?
The chemical equation for this reaction is HF + NaOH → NaF + H₂O
Enter a number with units.
The volume (in L) of 5.4 M NaOH solution needed to neutralize the HF solution is 232.67 L
How do i determine the volume of NaOH needed?The volume of NaOH needed can be obtained as illustrated below:
HF + NaOH → NaF + H₂O
The mole ratio of the acid, HF (nA) = 1The mole ratio of the base, NaOH (nB) = 1Volume of acid, HF (Va) = 349 L Molarity of acid, HF (Ma) = 3.6 MMolarity of base, NaOH (Mb) = 5.4 MVolume of base, NaOH (Vb) =?MaVa / MbVb = nA / nB
(3.6 × 349) / (5.4 × Vb) = 1
1256.4 / (5.4 × Vb) = 1
Cross multiply
1 × 5.4 × Vb = 1256.4
5.4 × Vb = 1256.4
Divide both side by 0.2
Vb = 1256.4 / 5.4
Vb = 232.67 L
Thus, we can conclude that the volume of NaOH needed is 232.67 L
Learn more about volume:
https://brainly.com/question/19053582
#SPJ1
Ammonium chloride decomposes according to the equation NH4Cl(s) ⇌ NH3(g) + HCl(g) with Kp = 5. 82 × 10−2 bar2 at 300°C. Calculate the equilibrium partial pressure of each gas and the number of grams of NH4Cl(s) produced if equal molar quantities of NH3(g) and HCl(g) at an initial total pressure of 8. 87 bar are injected into a 2. 00-liter container at 300°C
The molar mass of NH₄Cl is 53.49 g/mol, so the mass of NH₄Cl produced is:
0.0536 mol NH₄Cl x 53.49 g/mol = 2.86 g NH₄Cl
First, we can use the equilibrium constant Kp to calculate the equilibrium partial pressures of NH3 and HCl.
Kp = (PNH₃)(PHCl) / (PNH₄Cl)
Since we have equal molar quantities of NH₃ and HCl at the start, we can assume that the equilibrium partial pressures of NH₃ and HCl are equal and represent them as x.
Kp = (x)(x) / (PNH₄Cl)
x²= Kp(PNH₄Cl) = 5.82 × 10⁻² (PNH₄Cl)
Next, we can use the ideal gas law to relate the partial pressure of NH3 and HCl to the total pressure and the partial pressure of NH₄Cl.
PV = nRT
For 1 mole of NH₄Cl, we have 1 mole of NH₃ and 1 mole of HCl at equilibrium, so the total moles of gas is 1 + 1 + 1 = 3. The number of moles of NH₄Cl at equilibrium is also 1 since we started with equal moles of NH₃ and HCl.
We can use the ideal gas law for each gas:
PNH3 = (1/3)PT and PHCl = (1/3)PT
where PT is the total pressure at equilibrium.
Substituting into the Kp expression:
x² = Kp(PNH4Cl) = Kp(1/3 PT)²
x = √(Kp/3) * PT
Now we can solve for PT using the fact that the total pressure is 8.87 bar and the volume is 2.00 L.
PT = nRT/V = (3 moles)(0.0831 L bar K⁻¹mol⁻¹)(573 K)/(2.00 L) = 6.66 bar
Substituting into the expression for x:
x = √(Kp/3) * PT = sqrt(5.82 × 10⁻² / 3) * 6.66 = 0.467 bar
Therefore, the equilibrium partial pressure of NH₃ and HCl are both 0.467 bar.
To find the number of grams of NH₄Cl(s) produced, we can use the ideal gas law to calculate the number of moles of NH₄Cl:
PV = nRT
(1 mol)(0.467 bar)(2.00 L) = n(0.0831 L bar K⁻¹mol⁻¹)(573 K)
n = 0.0536 moles
Since NH₄Cl is the limiting reagent, we produced 0.0536 moles of NH₄Cl.
The molar mass of NH₄Cl is 53.49 g/mol, so the mass of NH₄Cl produced is:
0.0536 mol NH₄Cl x 53.49 g/mol = 2.86 g NH₄Cl
Learn more about molar mass,
https://brainly.com/question/22997914
#SPJ4
Based on the Lewis structure of NO2-, and your knowledge of VSEPR, which statement most accurately estimates the bond angle about the central N?it is slightly less than 120°it is slightly less than 121°it is slightly less than 180°
Based on the Lewis structure of NO2- and VSEPR theory, the central N in NO2- has a trigonal planar electron geometry due to the three electron pairs surrounding it.
The two oxygen atoms are located in the equatorial positions, while the lone pair of electrons occupies the axial position. The lone pair-lone pair repulsion is stronger than the lone pair-bond pair or bond pair-bond pair repulsions. This leads to a compression of the bond angles. Therefore, the estimated bond angle about the central N in NO2- is slightly less than 120°. The bond angle can be affected by various factors such as the electronegativity of the atoms involved and the presence of lone pairs. In the case of NO2-, the presence of a lone pair on the central N leads to a deviation from the ideal 120° bond angle. This is due to the repulsion between the lone pair and the oxygen atoms, causing a decrease in the bond angle. Therefore, the statement that most accurately estimates the bond angle about the central N in NO2- is "it is slightly less than 120°".
learn more about NO2- here
https://brainly.com/question/9331100
#SPJ11
Consider a 0. 244 m aqueous solution of sodium hydroxide, naoh. (1pts) a. How many grams of naoh are dissolved in 24. 39 ml? B. How many individual hydroxide ions (OH') are found in 23. 34 ml?
There are 0.238 grams of NaOH dissolved in 24.39 mL of a 0.244 M solution. There are 3.43 × [tex]10^{21}[/tex] individual OH- ions in 23.34 mL of a 0.244 M solution of NaOH.
a. To determine the grams of NaOH dissolved in 24.39 mL of a 0.244 M solution, we can use the formula:
moles of solute = molarity × volume of solution (in liters)
First, we need to convert the volume of solution from milliliters to liters:
24.39 mL = 24.39 ÷ 1000 L = 0.02439 L
Then, we can calculate the moles of NaOH present in this volume of solution:
moles of NaOH = 0.244 M × 0.02439 L = 0.00595 moles
Finally, we can use the molar mass of NaOH to convert moles to grams:
grams of NaOH = 0.00595 moles × 40.00 g/mol = 0.238 g
B). To determine the number of individual hydroxide ions (OH-) present in 23.34 mL of a 0.244 M solution, we first need to calculate the total number of moles of NaOH present in this volume of solution:
moles of NaOH = 0.244 M × 0.02334 L = 0.00570 moles
Since NaOH dissociates in water to form one Na+ ion and one OH- ion, we know that there is the same number of moles of Na+ and OH- ions present in the solution.
Therefore, the number of individual OH- ions present in 23.34 mL of a 0.244 M solution is:
number of OH- ions = moles of OH- ions × Avogadro's number
= moles of NaOH × 1 × 6.022 × [tex]10^{23}[/tex]
= 0.00570 × 6.022 × [tex]10^{23}[/tex]
= 3.43 × [tex]10^{21}[/tex] OH- ions
A solution is a homogeneous mixture of two or more substances that are evenly distributed at the molecular or atomic level. In a solution, the solute is the substance that is being dissolved, while the solvent is the substance that does the dissolving. The concentration of the solute in a solution can vary, and it is usually expressed as the amount of solute dissolved in a certain amount of solvent.
Solutions can be classified into different categories based on their physical state and the nature of the solute and solvent. For example, a solution in which the solvent is water is called an aqueous solution, while a solution in which the solute is a gas is called a gas solution. Solutions can also be classified as dilute or concentrated based on the amount of solute present in a given amount of solvent.
To learn more about Solution visit here:
brainly.com/question/7932885
#SPJ4
How is it possible that water can exist in three different states of matter in the same area? How might this be significant for the distribution of thermal energy on earth
The thermal energy distribution of the water molecules may be shown using statistical thermodynamics. Even at a temperature of 0 degrees Celsius, water molecules will have enough energy to evaporate at a certain point.
These two factors allow for the simultaneous existence of water as a solid, liquid, and gas. In other words, the only temperature at which water can exist in all three forms of matter—solid (ice), liquid (water), and gas (water vapour)—is known as the triple point of water.
This is a 0.01°C temperature. Ice, steam, and water can all be present in the same container at the same time when the pressure is low. The term "triple point" refers to a substance's intersection of temperature and pressure.
Learn more about thermal energy visit: brainly.com/question/19666326
#SPJ4
Calculate the number of moles in 273. 8 g of gold
The number of moles present in 273.8 g of gold is 1.39 mol, under the condition that the molar mass of gold is 196.97 g/mol.
The number of moles in 273.8 g of gold can be evaluated utilizing the formula
Number of moles = Mass of substance / Molar mass
The given molar mass of gold is 196.97 g/mol.
Then, the number of moles in 273.8 g of gold is
Number of moles = 273.8 g / 196.97 g/mol
= 1.39 mol (approx)
Molar mass is known as the mass of one mole of a substance. It is projected in grams per mole (g/mol). The molar mass of a compound can be evaluate by adding up the atomic masses of all the atoms present in one molecule of that compound.
For instance, gold has an atomic mass of 196.97 g/mol. Then, one mole of gold atom measures up to 96.97 grams.
To learn more about molar mass
https://brainly.com/question/837939
#SPJ4
Write the formulas for the following coordination compounds:
(i) Tetraamminediaquacobalt(III) chloride
(ii) Potassium tetracyanonickelate(II)
(iii) Tris(ethane−1,2−diamine) chromium(III) chloride
(iv) Amminebromidochloridonitrito-N-platinate(II)
(v) Dichloridobis(ethane−1,2−diamine)platinum(IV) nitrate
(vi) Iron(III) hexacyanoferrate(II)
The formulas for the following coordination compounds:
(i) Tetraamminediaquacobalt(III) chloride: [Co(NH₃)₄(H₂O)₂]Cl₃;
(ii) Potassium tetracyanonickelate(II): K₂[Ni(CN)₄];
(iii) Tris(ethane−1,2−diamine) chromium(III) chloride: [Cr(en)₃]Cl₃;
(iv) Amminebromidochloridonitrito-N-platinate(II): [Pt(NH₃)₂BrCl(NO₂)];
(v) Dichloridobis(ethane−1,2−diamine)platinum(IV) nitrate: [PtCl₂(en)₂]NO₃;
(vi) Iron(III) hexacyanoferrate(II): [Fe(H₂O)₆][Fe(CN)₆].
(i) Tetraamminediaquacobalt(III) chloride: [Co(NH₃)₄(H₂O)₂]Cl₃
The coordination sphere of the complex contains cobalt (III) ion surrounded by four ammine (NH₃) ligands and two aqua (H₂O) ligands. The counter ion, chloride (Cl⁻), is outside the coordination sphere and hence written in square brackets.
(ii) Potassium tetracyanonickelate(II): K₂[Ni(CN)₄]
The coordination sphere of the complex contains nickel (II) ion surrounded by four cyano (CN⁻) ligands. The two potassium (K⁺) ions are outside the coordination sphere and hence written separately.
(iii) Tris(ethane−1,2−diamine) chromium(III) chloride: [Cr(en)₃]Cl₃
The coordination sphere of the complex contains chromium (III) ion surrounded by three ethane-1,2-diamine (en) ligands. The counter ion, chloride (Cl⁻), is outside the coordination sphere and hence written in square brackets.
(iv) Amminebromidochloridonitrito-N-platinate(II): [Pt(NH₃)₂BrCl(NO₂)]
The coordination sphere of the complex contains platinum (II) ion surrounded by two ammine (NH₃) ligands, one bromido (Br⁻) ligand, one chlorido (Cl⁻) ligand, and one nitrito (NO₂⁻) ligand.
(v) Dichloridobis(ethane−1,2−diamine)platinum(IV) nitrate: [PtCl₂(en)₂]NO₃
The coordination sphere of the complex contains platinum (IV) ion surrounded by two ethane-1,2-diamine (en) ligands and two chlorido (Cl⁻) ligands. The counter ion, nitrate (NO₃⁻), is outside the coordination sphere and hence written in square brackets.
(vi) Iron(III) hexacyanoferrate(II): [Fe(H₂O)₆][Fe(CN)₆]
The coordination sphere of the complex contains two entities. The first entity contains iron (III) ion surrounded by six aqua (H₂O) ligands. The second entity contains hexacyanoferrate (II) ion, which is coordinated to the first entity through cyanide (CN⁻) ligands. The two entities are separated by a square bracket.
To know more about coordination compounds, refer to the link below:
https://brainly.com/question/29766591#
#SPJ11
identify the configurations around the double bonds in the compound. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop.a large molecule contains three double bonds. in two of the double bonds the hydrogen atom is on opposite sides of the double bond and the other groups on the carbons are different. in the third double bond the groups are different on one carbon and the same on the second carbon. answer bank
The compound has E configuration for two double bonds and Z configuration for one double bond. The E configuration refers to hydrogen atoms on opposite sides of the double bond with different groups on the carbons, while the Z configuration has the same groups on one carbon and different groups on the other.
The configurations around the double bonds in the compound are:
E configuration for the two double bonds where the hydrogen atoms are on opposite sides of the double bond and the other groups on the carbons are different.
Z configuration for the double bond where the groups are different on one carbon and the same on the second carbon.
The configuration around a double bond is determined by the relative orientation of the substituents on each carbon of the double bond. If the substituents on each carbon are on opposite sides of the double bond, it is called a trans configuration.
If the substituents on each carbon are on the same side of the double bond, it is called a cis configuration.
In the given molecule, two of the double bonds have the hydrogen atoms on opposite sides of the double bond, which means they have a trans configuration. The other groups on the carbons are different, indicating that these double bonds are likely part of a larger molecule with different substituents.
In the third double bond, the groups on one carbon are different and the groups on the other carbon are the same, indicating a cis configuration.
To know more about the configurations refer here :
https://brainly.com/question/23824844#
#SPJ11
purification of chromium can be achieved by electrorefining chromium from an impure chromium anode onto a pure chromium cathode in an electrolytic cell. how many hours will it take to plate 17.5 kg of chromium onto the cathode if the current passed through the cell is held constant at 34.0 a ? assume the chromium in the electrolytic solution is present as cr3 . time:
It will take approximately 948.7 hours to plate 17.5 kg of chromium onto the cathode at a constant current of 34.0 A.
The amount of electric charge required to plate a certain amount of a metal in an electrolytic cell can be calculated using Faraday's law, which states that the amount of charge (Q) required to deposit a certain amount of metal is proportional to the number of electrons transferred in the electrode reaction:
Q = nF
where n is the number of moles of metal deposited, and F is the Faraday constant (96,485 C/mol e-).
To calculate the time required to plate a certain amount of metal at a certain current, we need to know the relationship between the current, the charge, and the time. This relationship is given by:
Q = It
where I is the current, and t is the time.
Combining these equations, we get:
nF = It
Solving for t, we get:
t = nF/I
The number of moles of chromium deposited can be calculated from the mass of chromium and its molar mass. The molar mass of chromium is 52 g/mol.
Therefore, the number of moles of chromium deposited is:
n = 17.5 kg / 52 g/mol = 336.5 mol
Substituting the given values, we get:
t = (336.5 mol × 96,485 C/mol e-) / 34.0 A
Simplifying, we get:
t = 948.7 hours
to know more about Faraday's law refer here:
https://brainly.com/question/13369951#
#SPJ11
Frenkel defects exist in ZrO2. For each of these defects, note how many of the following vacancies and interstitials form: (a) i Zr4+ vacancies (b) i Zr4+ interstitials (c) i 02- vacancies (d) i 02- interstitials
In ZrO2, Frenkel defects occur due to the presence of Zr4+ and O2- ions. These defects involve the displacement of cations and anions from their lattice sites. In a Frenkel defect, a cation leaves its original site and occupies an interstitial site, while an anion leaves its original site and creates a vacancy.
For each Frenkel defect, there is one vacancy and one interstitial formed. Therefore, (a) i Zr4+ vacancies and (b) i Zr4+ interstitials form one each, and (c) i O2- vacancies and (d) i O2- interstitials also form one each. These defects have significant impacts on the physical and chemical properties of materials, including ZrO2, which is used in various applications, including ceramics, fuel cells, and catalysts.
For more information on ZrO2 see:
https://brainly.com/question/15281001
#SPJ11
whats the answer to this. me and my class are all stuck
The iodide ion is denoted by the sign I-. This ion has a charge of -1, as indicated by the minus sign, which implies it has one more electron than the iodine atom (I), which is neutral.
Iodine (I), whose atomic number is 53, has 53 electrons in its neutral state. The iodide ion, which has a charge of -1, is created when an iodine atom gains one electron. The iodide ion (I-) therefore has 54 electrons :
53 electrons from the neutral iodine atom + 1 additional electron gained when it becomes an ion = 54 electrons in the iodide ion.
Всё легко и просто, удачи.
Answer:
The answer would be 8 electrons
As the element would want to complete its valence shell with "8 electrons", it will gain electrons hence attaining a negative charge
The "negative sign only" also shows that this element gained 1 electron so we can conclude that this element is in group VII A (Group 7 A elements gain 1 electron to complete their valence shell)
Buffers stabilize pH by releasing hydrogen ions when a(n)
Buffers stabilize pH by releasing hydrogen ions when a solution becomes too basic (high pH). They help maintain a constant pH by neutralizing excess hydrogen ions or hydroxide ions in the solution.
Buffers stabilize pH by releasing hydrogen ions when a solution becomes too basic (alkaline) or by absorbing hydrogen ions when a solution becomes too acidic. The pH of a solution is a measure of its acidity or alkalinity and is determined by the concentration of hydrogen ions present. Buffers help to maintain a stable pH by preventing large changes in the concentration of hydrogen ions.
To learn more about, buffer, click here, https://brainly.com/question/27959511
#SPJ11
Which of the following ions have the same ground state electron configuration: S2-, N3-, Mg2+, and Br- ?
a. N3- and Mg2+
b. S2-, N3-, and Br-
c. S2- and Br--
d. Mg2+ and Br-
e. S2-, N3-, Mg2+, and Br-
Answer:
A. N 3- and Mg 2+
Explanation:
To compare electron configurations of each option, it is important to understand how to assign orbitals (s, p, d, f) to atoms. S is assigned for the first two columns of the periodic table, the p orbital is assigned to columns 13-18, the d orbital begins on row 4 and encompasses the transition metals.
The coefficient (ex. 2p5) comes from what number in the orbital (s, p, d, or f) the atom/ion is located in. In this example, atom 2p5 is fluorine because it is 5th in the p orbital block.
For a future exam I recommend memorizing the periodic table linked.
1. Write the electron configuration out like normal, do not consider the charges of the atoms yet
S: 1s2, 2s2, 2p6, 3s2, 3p4
2. Then write the electron configuration considering the positive or negative charge of the atom
POSITIVE CHARGE= remove electrons from the highest orbital first
NEGATIVE CHARGE= add electrons to the highest orbital
S -2: 1s2, 2s2, 2p6, 3s2, 3p6
The original 3p4 orbital gains two electrons due to the -2 charge, making a complete orbital: 3p6
N: 1s2, 2s2, 2p3
N -3: 1s2, 2s2, 2p6 (-3 charge means adding three electrons to the highest orbital of this atom, 2p)
Mg: 1s2, 2s2, 2p6, 3s2
Mg +2: 1s2, 2s2, 2p6 (the 3s2 is gone because of the +2 charge on the ion which indicates to remove 2 electrons from the highest orbital, 3s)
Br: 1s2, 2s2, 2p6, 3s2, 3p6, 4s2, 3d10, 4p5
Br -1: 1s2, 2s2, 2p6, 3s2, 3p6, 4s2, 3d10, 4p6 (add an electron to the highest orbital due to the -1 charge on the Br ion)
Now, compare the electron configurations for each ion. It is faster to compare the highest orbital of each ion to each other than the whole configuration itself.
Taking the highest orbital...
S -2: 3p6
N -3: 2p6
Mg +2: 2p6
Br -1: 4p6
The highest orbital in both N -3 AND Mg +2 is 2p6, signifying that these atoms have the same ground state electron configuration.
The ions that have the same ground state electron configuration are: a. N³⁻ and Mg²⁺
To determine this, we need to find the electron configuration for each ion:
1. S²⁻: Sulfur has 16 electrons, but since it gained 2 electrons, it has a total of 18 electrons. Its electron configuration is [Ne]3s²3p⁶.
2. N³⁻: Nitrogen has 7 electrons, but since it gained 3 electrons, it has a total of 10 electrons. Its electron configuration is [He]2s²2p⁶.
3. Mg²⁺: Magnesium has 12 electrons, but since it lost 2 electrons, it has a total of 10 electrons. Its electron configuration is [He]2s²2p⁶.
4. Br-: Bromine has 35 electrons, but since it gained 1 electron, it has a total of 36 electrons. Its electron configuration is [Ar]3d¹⁰4s²4p⁶.
Comparing the electron configurations, we can see that N³⁻ and Mg²⁺ have the same ground state electron configuration. Therefore, the correct answer is a. N³⁻ and Mg²⁺.
To know more about the refer electron configuration here :
https://brainly.com/question/29757010#
#SPJ11
PART OF WRITTEN EXAMINATION:
The quantity of polarization is determined by
A) on structure to electrolyte potential
B) off structure to electrolyte potential
C) on- off structure to the electrolyte potential
D) off - native structure to electrolyte potential
The quantity of polarization is determined by the "on- off structure to the electrolyte potential." Therefore the correct option is option C.
A potential difference between the metal and the electrolyte is created when the two are in contact. The movement of electrons between the metal and the electrolyte as a result of this potential difference might result in corrosion or other electrochemical processes.
A reference electrode, such as a standard hydrogen electrode (SHE), and a voltmeter can be used to measure the potential difference between the metal and the electrolyte.
The amount of polarisation can be calculated by measuring the potential difference between the metal when it is in contact with the electrolyte (on structure) and when it is not (off structure). Therefore the correct option is option C.
For such more question on polarization:
https://brainly.com/question/23631454
#SPJ11
The most basic source of immediate energy for most organisms is ________.
A) amino acids
B) lipids
C) starches
D) water
E) glucose
The most basic source of immediate energy for most organisms is glucose. Therefore the correct option is option E.
Most organisms use glucose as their main source of energy since it is a simple sugar. It is created by plants during the process of photosynthesis, and both plants and animals break it down during the process of cellular respiration to release energy in the form of ATP (adenosine triphosphate).
The breakdown of complex carbohydrates (like starches), the breakdown of glycogen, which is stored glucose in animals, or the ingestion of simple sugars or carbs in the food are some of the different ways that glucose can be produced.
After being absorbed by cells, glucose can be used to fuel cellular functions like muscular contraction or active transport of molecules across cell membranes by turning it into ATP. Therefore the correct option is option E.
For such more question on glucose:
https://brainly.com/question/397060
#SPJ11
If 3.28g of a gas occupies a volume of 6.22 liters at a pressure of 845mmHg and a temperature of 378k
A) how many moles of gas exist in the container?
B) what is the molar mass of the gas?
SHOW YOUR WORK!!!!
0.22 moles of gas exist in the container and the molar mass of the gas is 15g/mol.
The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as
PV = nRT
where,
P = Pressure
V = Volume
T = Temperature
n = number of moles
Given,
Mass = 3.28g
Volume = 6.22 L
Temperature = 378K
Pressure = 845 mm Hg
PV = nRT
845 × 6.22 = n × 62.36 × 378
number of moles = 0.22 moles
Moles = mass / molar mass
Molar mass = mass / moles
= 3.28 / 0.22
= 15 g/mol
Learn more about Ideal Gas Law, here:
https://brainly.com/question/28257995
#SPJ1
Corrosion occurs when there is a _____ differential between two components of a system
A) current
B) voltage
C) supply
D) pH
E) carbon
The pH differential between two components of a system. Corrosion is a natural process that occurs when a material, usually a metal, starts to degrade due to the chemical reactions with its environment. The process of corrosion typically involves the flow of electrons between the two components of a system, which are at different pH levels.
This pH differential creates an electrochemical cell that drives the corrosion process. When a system has a pH differential, the more acidic component (lower pH) acts as an anode, while the more alkaline component (higher pH) acts as a cathode. This electrochemical cell causes the flow of electrons from the anode to the cathode, resulting in the oxidation of the anode and the reduction of the cathode. The oxidation process leads to the formation of corrosion products such as rust or oxide layers on the surface of the anode material. To summarize, corrosion occurs when there is a pH differential between two components of a system, leading to the formation of an electrochemical cell that drives the degradation process.
learn more about pH differential here.
https://brainly.com/question/11893798
#SPJ11
Aqua regia is a mixture of
- HCl and H2SO4
- HNO3 and H2SO4
- HNO3 and HNO2
- HCl and HNO3
Aqua regia is a highly corrosive mixture of nitric acid (HNO3) and hydrochloric acid (HCl) in a 1:3 ratio. Therefore the correct option is option D.
Noble metals like gold and platinum, which are resistant to other acids, can be dissolved by this substance, which is why it is known as "royal water."
The hydrochloric acid-produced chloride ions oxidise the metal, and they combine with the metal ions to form soluble chlorides, which is how the mixture functions.
Metallurgy, etching, and analysis are just a few of the uses for aqua regia. Aqua regia needs to be handled carefully and cautiously due to its extremely reactive nature. Therefore the correct option is option D.
For such more question on hydrochloric:
https://brainly.com/question/1602388
#SPJ11
What types of polyatomic ions (in order by charge)
There are several types of polyatomic ions, and they are typically listed in order by charge. polyatomic ion is a molecule made up of two or more atoms that are covalently bonded
Polyatomic ions can be classified according to their charge, which can be positive or negative. The most common polyatomic ions with a positive charge are ammonium (NH4+), hydronium (H3O+), and mercury (I) (Hg2 2+). The most common polyatomic ions with a negative charge include hydroxide (OH-), nitrate (NO3-), sulfate (SO4 2-), and phosphate (PO4 3-).
In general, polyatomic ions with a higher charge tend to be less stable than those with a lower charge, and they can also have a greater impact on the chemical properties of the compounds in which they are found. Understanding the types of polyatomic ions and their properties is an important aspect of studying chemistry and related fields.
To know more about polyatomic ions visit:
https://brainly.com/question/12852496
#SPJ11
In the chemical industry, ammonia is manufactured by the Haber process according to the following chemical equation. N2(g) + 3 H2(g) = 2 NH3(g) + heat This is an exothermic reaction. How can the yield of ammonia production be improved?
In the chemical industry, ammonia is manufactured by the Haber process according to the following chemical equation: N₂(g) + 3 H₂(g) = 2 NH₃(g) + heat. This is an exothermic reaction. To improve the yield of ammonia production, you can follow these steps:
1. Increase pressure: Increasing the pressure will shift the equilibrium towards the side with fewer moles of gas, which is the ammonia side in this case. This will increase the yield of ammonia.
2. Decrease temperature: Since the reaction is exothermic, lowering the temperature will shift the equilibrium towards the side that produces heat, which is also the ammonia side. However, this step must be balanced with the need for a reasonable reaction rate, as lower temperatures slow down the reaction rate.
3. Use a catalyst: The use of a suitable catalyst, like iron with added promoters, can help increase the rate of the reaction without affecting the position of the equilibrium. This allows for a faster production of ammonia at the desired yield.
By applying these principles, we can improve the yield of ammonia production in the chemical industry using the Haber process.
To know more about the Haber process refer here :
https://brainly.com/question/21867752#
#SPJ11
What category of glove material provides the most protection against the widest range of chemicals?
Synthetic polymers
Naturally polymers
Laminates
Polyvinyl chloride and polyvinyl alcohol
The category of glove material that provides the most protection against the widest range of chemicals is synthetic polymers.
These gloves are made from materials like nitrile, neoprene, and butyl rubber which offer superior protection against a variety of chemicals. They are also resistant to punctures, tears, and abrasions, making them ideal for use in environments where there is a high risk of exposure to hazardous chemicals. Additionally, synthetic polymer gloves offer better comfort and flexibility compared to other materials, allowing for greater dexterity and ease of use. The combination of protection and customization makes synthetic polymers the ideal choice for providing protection against the widest range of chemicals.
To learn more about gloves click here https://brainly.com/question/30427786
#SPJ11
what is basaltic lavas?
Basaltic lavas are a type of lava that is low in viscosity, rich in iron and magnesium, and primarily composed of basaltic magma. They are commonly found in volcanic regions around the world and are characterized by their dark color and fine-grained texture.
Basaltic lavas are a type of lava that is primarily composed of basaltic magma. Basaltic magma is a type of magma that has low viscosity and is rich in iron and magnesium. This type of magma is produced by melting the mantle, which is the layer beneath the Earth's crust.
When basaltic magma reaches the Earth's surface, it flows out as a thin and runny lava. Basaltic lava flows are typically characterized by their low viscosity and can travel long distances before cooling and solidifying. Basaltic lavas are usually dark in color and have a fine-grained texture.
Basaltic lavas are some of the most common types of lavas found on Earth. They can be found in many volcanic regions, including Hawaii, Iceland, and the Columbia River Plateau in the United States. Basaltic lava flows have been known to be dangerous, especially if they flow rapidly and unpredictably.
Learn More about viscosity here :-
https://brainly.com/question/2568610
#SPJ11
What is the density of water in lb/m3 (pounds per cubic meter)? (Hint: 1 lb = 454 g)
The density of water in lb/m3 is 62.4279.The density of water is an important physical property of this substance.
The density of water is defined as the mass per unit volume of water. In other words, it is the amount of mass contained within a particular volume of water. This property is particularly important in applications such as calculating the buoyancy of objects in water.
The density of water is typically expressed in kilograms per cubic meter (kg/m3) or in grams per milliliter (g/mL). However, since the question asks for the density of water in lb/m3 (pounds per cubic meter), we need to convert the units.
One pound (lb) is equal to 454 grams (g). Therefore, we can use the conversion factor of 1 lb/m3 = 16.0185 kg/m3. Using this conversion factor, we can calculate the density of water in lb/m3 as:
Density of water = 1000 kg/m3 * (\frac{1 lb }{454 g}) * (\frac{1 m3 }{ 1000 L}) * (\frac{1000 L }{ 1 m3}) * (\frac{1 lb }{ 16.0185 kg})
Density of water = 62.4279 lb/m3
Therefore, the density of water in lb/m3 is 62.4279.
learn more about density Refer: https://brainly.com/question/29775886
#SPJ11
PART OF WRITTEN EXAMINATION:
What is the first line of defense in Cathodic Protection?
A) impressed current systems
B) grounding rods
C) coating of the pipe
D) holidays
E) carbon
The first line of defense in Cathodic Protection is the coating of the pipe. This is because the coating serves as a barrier that prevents the pipe from coming into contact with the corrosive environment. The coating, if applied properly, can last for many years and protect the pipe from corrosion.
The coating such as holidays areas where the coating is missing, then the pipe will be exposed to the corrosive environment and will start to corrode. This is where Cathodic Protection comes in. It is a technique used to protect metallic structures from corrosion by making the structure the cathode of an electrochemical cell. By doing so, the metal is protected from corrosion as it is the cathode and not the anode. Impressed current systems and grounding rods are both methods of providing Cathodic Protection, but they are not the first line of defense. Carbon is not a relevant term in the context of Cathodic Protection. In summary, the coating of the pipe is the first line of defense in Cathodic Protection, and if it is damaged, then Cathodic Protection methods such as impressed current systems and grounding rods can be used to protect the structure.
learn more about Cathodic Protection here.
https://brainly.com/question/13031370
#SPJ11
Lela's teacher showed the class the image above. She explained that the image is a small crystal of salt. Lela's teacher gave the class the following information:
Some molecules bond to other molecules in a pattern. These groups of molecules are called crystals because they have a crystalline structure. They are made of molecules that join to other molecules that are the same.
Salt molecules are made of sodium and chlorine, two elements (atoms) that join together to make a salt molecule. The sodium is smaller than the chlorine.
Which of the following is TRUE?
Based on the information that "Salt molecules are made of sodium and chlorine, two elements (atoms) that join together to make a salt molecule. The sodium is smaller than the chlorine". The statement that is correct is that the small purple sphere is sodium and large green sphere is chlorine, and one salt molecule is made up of one small sphere and one large sphere. Hence, option C is correct.
Generally in chemical terms, salts are described as ionic compounds. To most of the people, salt usually refers to table salt, which is chemically sodium chloride.
Basically, Sodium chloride is formed from the ionic bonding of sodium ions and chloride ions.
Hence, option C is correct.
Learn more about sodium chloride from the link given below.
https://brainly.com/question/9811771
#SPJ1