At the instant a current of 0.20 a is flowing through a coil of wire, the energy stored in its magnetic field is 6.0 x 10-3 j. The self inductance of the coil will be 0.30 H.
What is self inductance?
An example of electromagnetic induction is the property of self-inductance. The definition of self inductance is something like induction of a voltage in a wire that carries current when the current in the wire is changing. In the instance of self-inductance, the circuit itself induces a voltage through the magnetic field produced by a changing current. The voltage is thus self-induced.
Given,
Current (I) = 0.20 A
Energy (U)= 6.0 x 10⁻³
By the equation,
U = 1/2 (LI²)
L = 2U/I²
Putting the values given in the above equation,
L = 2(6.0 x 10⁻³) / (0.20)²
L = 0.30
Hence, the self inductance in the coil is 0.30 H.
To know more about self inductance, go to URL
https://brainly.com/question/25484149
#SPJ4
Question 6, “Some students observe drops of water falling from a tap that leaks, as shown in the diagram.
The students measure the time for 50 drops to fall from the tap. The time for 50 drops to fall is 20 seconds.
Calculate the average time between two drops falling.”
The average time between two drops falling t = 2/5 sec.
Equation :To calculate average time use formula,
t + t / product
So,
given,
time = 20 s
drops = 50
average time = ?
From this,
measured time for 50 drops = 20sec
Time required for 1 drop = 20/ 50
Average time between two drops = (2/5 + 2/5) / 2
Hence,
The average time between two drops t = 2 / 5
What is average time?Average Time on Page is a web analytics metric that gauges how long, on average, all website visitors stay on a single page. Only the average amount of time that users spend on non-exit pages is measured by this metric, which ignores exit pages and bounces.
To know more about gauges :
https://brainly.com/question/28481877
#SPJ9
A hiker walks 4.24m, north and 13.32 m, E. What is the magnitude of his resultant displacement.
Answer:the magnitude of the hikers resultant displacement
Explanation:
a 0.900 kgkg block is attached to a spring with spring constant 13.0 n/mn/m . while the block is sitting at rest, a student hits it with a hammer and almost instantaneously gives it a speed of 41.0 cm/scm/s . what are
A 0.900 kg block that is attached to a spring with spring constant 13.0 n/m when hit with the hammer has the amplitude of oscillation as 11.637 x 10^-3 cm.
Concept of spring force:When an object’s motion repeats in a predetermined cycle, it is said to be in periodic motion. The motion described here is an oscillation.
Spring and pendulum motion are two straightforward instances of oscillations, but there are numerous additional instances as well.
The fact that the item is in a stable equilibrium position is a key characteristic of periodic motion. A restorative force that is pointed in that direction as well. The application of force occurs in spring.
If x is the compression of the spring after it is hit,
1/2 k x² = 1/2 m v²
13 x² = .90 x (41 x 10⁻²)² 1681
x² = 116.37 x 10⁻⁴
x = 11.637 x 10^-5m
11.637 x 10^-3 cm
Amplitude of oscillation = 11.637 x 10^-3 cm
To know more about spring force visit:
https://brainly.com/question/14655680
#SPJ4
Describe the changes of energy in an electrical train as it approaches a station and breaks to halt
The changes of energy in an electrical train as it approaches a station and breaks to halt are potential energy → friction → heat and sound
- → friction on train wheels due to brakes reduces KE of train to zero
- → heat and sound to surroundings
What is energy?Energy, according to scientists, is the capacity for work. The ability to transform energy from one form to another and use it to perform tasks is what makes modern civilization possible. People utilize energy to travel by foot and bicycle, drive vehicles on land and in water, prepare meals on stoves, create ice in freezers, illuminate our homes and workplaces, create goods, and launch people into space.
Energy comes in a wide variety of forms, including:
HeatLightMotionElectricalChemicalGravitationalThese energies can be divided into two categories for working energy:
Potential or stored energyKinetic or working energyLearn more about energy
https://brainly.com/question/13881533
#SPJ4
A flat slab of styrofoam, with a density of 32 kg/m3, floats on a lake. what minimum volume must the slab have so that a 45 kg boy can sit on the slab without it sinking?
Minimum volume must the slab have so that a 45 kg boy can sit on the slab without it sinking is 0.465 m³.
What is buoyant force?
The buoyant force is the upward force exerted on an item that is fully or partially submerged in a fluid. This upward thrust is also known as an upthrust. Because of the buoyant force, a body submerged partially or entirely in a fluid appears to be lighter or to lose weight.
Given:
Density of the styrofoam, ρ' = 32 kg/m³
Now, let the volume of the slab = V
the submerged volume be = V ;
now, the volume of water displaced will be V
thus,
the buoyant force acting will be = ρVg
{where,
ρ is the density of water
g is the acceleration due to gravity}
now,
total downward force acting = weight of the boy + weight of the slab
total downward force acting =45 × g + ρ' × V × g
For the no sinking condition, buoyant force should be equal to the total downward force.
thus,
ρ × V × g = 45 × g + ρ' × V × g
or
ρ × V = 45 + ρ' × V
on substituting the values
V ( 1000 - 32 ) = 45 ;
or
V = 0.465 m³
To know more about buoyant force, go to URL
https://brainly.com/question/11884584
#SPJ4
a pendulum clock runs fast, how should the length of the pendulum be adjusted to correct the problem?
If a pendulum clock is running fast, the length of the pendulum should be increased to correct the problem.
The time period of a simple pendulum clock is:
T= 2π√(l/g)
Where,
l is the length of the simple pendulum and g is the gravity.
From the formula, we can see that the time period is directly proportional to the square root of the length. Decreasing the length will decrease the time period and the clock will move faster.
In order to slow the clock, increase the length of the pendulum to increase the time period.
If you need to learn more about simple pendulum, click here
https://brainly.com/question/2292218?referrer=searchResults
#SPJ4
Were both sides of the single magnet attracted to the metal surface? use your results to support your answer.
YES both sides of the single magnet attracted to the metal surface because metals are not paramagnetic magnets, temporary magnetism can be induced in metal by bringing a magnet close to it . The pole of metal surface will be such that it is attracted by the magnet.
From result: A1 and A2 both side of magnet attract to metal surface.
when one magnet is removed from stack, magnetic poles of stack will not change because stack consist of many mgnet , after removing one magnet from stack pole strength of stack will reduce but pole of stack will remain same.
From result:
When A side of To know more about standard light intensity visit : https://brainly.com/question/13003361
#SPJ4interact with stack , they attract each other and after removal of one magnet from stack, stack repel with other side A2 of magnet. hence stack pole has not changed after removal of one magnet from it.
Initial most propble speed Vi= [tex]\sqrt 2RT/M[/tex]
To know more about magnet visit : https://brainly.com/question/2841288
#SPJ4
a helicopter blade spins at exactly 80 revolutions per minute. its tip is 4.00 m from the center of rotation.
The linear speed of the helicopter blade is 33.51 m.
Tangential or linear speed of the bladeThe tangential speed of the helicopter blade is calculated as follows;
v = ωr
where;
ω is angular speed in radian per secondr is the radius of the circular pathω = 80 rev/min
ω = 80 x 2π rad/rev x 1 min/60s
ω = 8.378 rad/s
v = 8.378 rad/s x 4 m
v = 33.51 m
Thus, the linear speed of the helicopter blade is 33.51 m.
Learn more about linear speed here: https://brainly.com/question/15154527
#SPJ4
The complete question is below:
Find the tangential speed of the helicopter's blade.
solve problem 2.5 if a 150 mm thick brick wall, which is 2.1 m high and 7.5 m long, bears directly on the top of beam cd.
The tributary region of the beam CD is indicated by the shaded area. The tributary area of the beam CD has a width of B=3.6m. The CD beam's tributary area is 7.5 meters long. The concrete slab has a thickness of H=100mm.
What is structural analysis?
The goal of structural analysis is to forecast how a structure will react to a set of arbitrary external loads.
The goal of the structural analysis is to determine how changes to the structure as a whole or in part will affect the ultimate limit states and service ability limit states as described in Section 8.
Establishing a sensible distribution of internal forces, moments, stresses, strains, and displacements over the entire or a portion of a structure is the goal of a structural study.
To learn more about structural analysis, visit:
https://brainly.com/question/28152298
#SPJ4
a torque of 12 n ∙ m is applied to a solid, uniform disk of radius 0.50 m. if the disk accelerates at 1.60 rad/s^2, what is the mass of the disk?
Mass of disc m =16.84 kg
Moment of inertia of disc about axis perpendicular to the plane of disc and passing through its centre = MR²/2
12 = MR²/2 × 5.7
12 = M(0.5)²/2 × 5.7
Mass = 12 × 2 /5.7 × 0.5² = 16.84 Kg
The atomic mass of an detail is described because the weighted common mass of that detail’sThe atomic mass of an detail is described because the weighted common mass of that detail’s is False
Atomic mass (Also referred to as Atomic Weight, even though this denomination is incorrect, for the reason that mass is belongings of the frame and the burden relies upon at the gravity) Mass of an atom similar to a positive chemical detail). mean "unit of atomic mass". This unit is likewise typically referred to as Dalton (Da) in honor of the English chemist John Dalton.
It is equal to 1 12th of the mass of the nucleus of the maximum ample isotope of carbon, carbon-12. It corresponds more or less to the mass of a proton (or a hydrogen atom). It is abbreviated as "uma", even though it could additionally be located with the aid of using its English acronym "amu" (Atomic Mass Unit). However, the advocated image is simply "u".
The atomic masses of chemical factors are typically calculated using the weighted average of the masses of the exceptional isotopes of each detail while taking into account the relative abundance of each one. This is the cause of the discrepancy between an element's atomic mass in umas and the range of nucleons that contains the nucleus of its maximum uncommon place isotope.
To know more about atomic mass , visit :
https://brainly.com/question/13672279
#SPJ4
A 5kg object with a velocity of 6m/s strikes a motionless ball. the object stops moving as a result of the collision. what is the velocity of the ball after the collision?
mU1 + mU2 = mV1 + mV2
(5 × 6) + (3 × 4) = 5V + 3V
30 + 12 = 8V
42 = 8V
V = 5.25m/s
The velocity of the ball after the collision is 5.25m/s.
What is velocity ?While velocity refers to the speed and direction of an object's motion, speed is the rate at which an object moves along a path over time.
The rate at which something moves in a certain direction is referred to as its velocity. as quickly as a car traveling north on a highway or a rocket taking flight. The magnitude of the velocity vector's absolute value will always be equal to the motion's speed because it is a scalar.
To learn more about velocity from the given link:
brainly.com/question/18084516
#SPJ4
Static charges are not dangerous
true
false
Answer:
false
Explanation:
If the maximum e-component of an electromagnetic wave is 600 v/m, what is the maximum b-component?
the maximum e-component of an electromagnetic wave is 600 v/m then the maximum b-component is B = 2.0 * 10^-6 T.
What is electromagnetic wave?In terms of science, electromagnetic radiation is made up of electromagnetic field waves that are travelling through space while carrying radiant electromagnetic energy. It consists of X-rays, gamma rays, microwaves, infrared, light, and radio waves. These waves are all a component of the electromagnetic spectrum.
Em/Bm = c
Bm = c*Em
B = E/c
B = 600 V/m / 299,792,458 m/s
B = 2.0 * 10^-6 T
to learn more about electromagnetic wave go to -
https://brainly.com/question/13874687
#SPJ4
Two balls of masses 4kg and 2kg move towards each other with a velocity of 4ms-1 and -2ms-1 respectively. if after collision they stick together and move with +2ms-1, what is
The change in the momentum of the balls is -8 kg.m/s.
Initial momentum of the ballsThe initial momentum of the balls is calculated as follows;
Pi = 4 kg(4 m/s) + 2 kg(2 m/s)
Pi = 20 kg.m/s
Final momentum of the ballsPf = 2 m/s (4 kg + 2 kg)
Pf = 2 m/s (6 kg)
Pf = 12 kg.m/s
Change in momentum of the ballsΔP = Pf - Pi
ΔP = 12 kg.m/s - 20 kg.m/s
ΔP = -8 kg.m/s
Thus, the change in the momentum of the balls is -8 kg.m/s.
Learn more about change in momentum here: https://brainly.com/question/7538238
#SPJ4
The complete question is below:
What is is the change in momentum of the balls?
what is fmin,1, the lowest frequency that will produce the maximum intensity (imax) at the observer, assuming the observer would still hear the intensity of 6 w/m2 when either s1 or s2 is sounded alone?
The lowest 19.152 [tex]\frac{w}{m^{2} }[/tex] frequency that will produce the maximum intensity (Imax) at the observer, assuming the observer will still hear an intensity of 6 w/m2 when [tex]S_{1}[/tex] or [tex]S_{2}[/tex] is heard alone.
We have [tex]I_{1} =I_{2}[/tex]
[tex]= 6 w/m^{2}[/tex]
Path difference
δ = 5.6568 - 4
δ = 1.6568 m
v = 335 m/s
Intensity I = [tex]4I_{1} cos^{2}[/tex](πδ/λ)
[tex]= 4I_{1} cos^{2}[/tex](πδf/v)
[tex]= 4 * 6 cos^{2}(\frac{\pi *1.6568*30}{335} )[/tex]
I = 19.152 [tex]\frac{w}{m^{2} }[/tex]
the lowest frequency is selected to cowl the N-point signal at its coarsest scale with the aid of the default wavelet's two-time popular deviations. the very best frequency wavelet bandpass filter out loses half of of its height importance at the Nyquist frequency because of the most frequency.
guy's voice has the lowest frequency in comparison to other sounds seeing that frequency and pitch cross hand in hand. Pitch denotes the voice's shrillness. the man's voice is the selection with the least strident tone. It, therefore, has the bottom pitch of all and for this reason the bottom frequency.
Know more about frequency:
https://brainly.com/question/5102661
#SPJ4
For the theory of special relativity to apply, how should a reference frame be chosen?
1905, Albert Einstein. The theory of special relativity explains how speed affects space, time, and mass. Small amounts of mass (m) can be interchangeable with large amounts of energy (E), as defined by the classic equation E = mc2, according to the theory, which offers a means for the speed of light to define the link between energy and matter.
When talking about extremely high energy, incredibly fast speeds, and astronomical distances without the difficulties of gravity, special relativity is typically employed. With the publication of his general relativity article in 1915, Einstein formally incorporated gravity into his ideas.
The mass of an object and the energy needed to move it both grow unlimited as it gets for any matter to go faster than light travels. This cosmic speed limit inspires new realms of physics and science fiction, as people consider travel across vast distance closer to the speed of light. Therefore, it is not possible.
To learn more about Special relativity:
https://brainly.com/question/28289663
#SPJ4
a copper cube has a mass of 153.6g the density of copper is 8.96g/cm3 calculate both the volume of the cube in cm3 and also the edge length in cm
The Volume of Copper Cube with mass 153.6 g and density 8.96 g/cm³ is 17.14 cm³ and its Edge is 2.58 cm long.
We have a Copper Cube of mass 153.6 g and density 8.96 g/cm³.
We have to calculate the volume and length of the cube in cm³ and cm respectively.
How is density and mass of body related ?The density and mass of body are related as follows -
M = ρV
Where -
M - mass of body
ρ - density of body
According to the question, we have →
Mass of copper cube = 153.6 g
Density of copper cube = 8.96 g/cm³
Using the formula discussed above -
M = ρV
V = M/ρ = 153.6/8.96 = 17.14 cm³
We know that the volume of cube is -
V = a x a x a
a³ = 17.14 cm³
a = 2.58 cm
Hence, the Volume of Cube is 17.14 cm³ and its Edge is 2.58 cm long.
To solve more questions on Mass - Density Relation, visit the link below-
https://brainly.com/question/4235232
#SPJ4
You drive for 30 minutes at 30 mi/hr and then for another 30 minutes at 50 mi/hr. what is your average speed for the whole trip?
The average speed for the whole trip will be 40 miles per hour.
What is the average speed?The average speed is the ratio of the total distance over the total time taken. Then the average speed is given as,
Average speed = (Total distance) / (Total time)
You drive for 30 minutes at 30 miles per hour. Then the distance covered will be
D₁ = 30 x 30 / 60
D₁ = 15 miles
And then for another 30 minutes at 50 miles per hour. Then the distance covered will be given as,
D₂ = 50 x 30 / 60
D₂ = 25 miles
Then the average speed for the whole trip will be
Average speed = (15 + 25) / (0.5 + 0.5)
Average speed = 40 / 1
Average speed = 40 miles per hour
Thus, 40 miles per hour will be the average speed for the whole trip.
More about the average speed link is given below.
https://brainly.com/question/12322912
#SPJ4
a rower wanted to determine the speed of a river's current prior to going down a particular section of the river. she released a tracker into the river. the tracker sent her back the following information: after 4 seconds since the tracker was released into the river the tracker had traveled 7 meters. after 10.6 seconds since the tracker was released into the river the tracker had traveled 17.5 meters. assuming the river was flowing at a constant speed, what was the speed of the current on this section of the river?
The part of river's current moves at a 1.486 m/s speed.
the distance between two points, objects, lines, etc. Remoteness is the quality of being physically separated from another thing or person. a line drawn in the universe. To walk seven miles in one hour would be too time-consuming.
The difference between the change in distance and the change in time is used to compute the rate of change.
Rate: times the distance Time
The distance is 16.5 miles, and the time is 5.5 hours.
If we enter this into the formula above, it yields:
16.5 - 5.5 / 10.9 - 3.5 = 11/7.4 = 1.486 m/s is the rate of change.
Calculations show that the constant rate of change is 1.486 m/s.
learn more about distance here-
https://brainly.com/question/15172156
#SPJ4
You toss a ball straight up, and it reaches a maximum height h above the launch position. If you want to double the length of the time interval during which the ball stays in the air above the launch position, to what maximum height do you have to throw it? Express your answer in terms of h.
With the use of formula, the maximum height reached by the ball in term of h is 4h
What is a Projectile ?A projectile is any object thrown into the space or atmosphere which take a trajectory path.
If you toss a ball straight up, and it reaches a maximum height h above the launch position, Then the maximum height reach will be
v² = u² - 2gh
But at maximum height, v = 0
u² = 2gh
h = u² / 2g ...... (1)
Also, the time taken will be;
v = u - gt
since v = 0,
u = gt
Substitute u into equation 1
h = (gt)² / 2g
If you want to double the length of the time interval during which the ball stays in the air above the launch position, then,
u = g2t and the maximum height will be
H = (g2t)² / 2g
H = 4g²t² / 2g
H = 4(gt)² / 2g
but h = (gt)² / 2g
H = 4h
Therefore, the maximum height you have to throw it in terms of h will be 4h.
Learn more about Maximum height here: https://brainly.com/question/12446886
#SPJ1
You push on a block on frictionless ice with a force of 8 n, causing it to accelerate at 2 m/s 2. the mass of the block is:________
The mass of the block is:_force
Given, force f=8N.
acceleration (a) = 2 m/s 2. Now, a cording to
Newtons Law of force where, me mass
or,
m-Ea
= 8 = 4kg
What is force ?
In physics, a force is a power that could exchange the motion of an item. A force can reason an item with mass to alternate its velocity (e.g. moving from a kingdom of relaxation), i.e., to accelerate. force also can be described intuitively as a push or a pull. A pressure has each significance and course, making it a vector amount. it's far measured within the SI unit of newton (N). force is represented by the symbol F (formerly P).
The original form of Newton's second regulation states that the net pressure acting upon an object is same to the price at which its momentum adjustments with time. If the mass of the item is consistent, this regulation means that the acceleration of an item is without delay proportional to the internet pressure performing on the item, is in the route of the net force, and is inversely proportional to the mass of the item.
principles associated with pressure include: thrust, which will increase the velocity of an item; drag, which decreases the velocity of an item; and torque, which produces changes in rotational velocity of an item.
Learn more about force https://brainly.com/question/13191643
#SPJ4
One of the pieces of evidence supporting energy quantization was the line spectra of elements. Why does this demonstrate energy quantization?.
There are distinct emission lines indicating discrete energy levels.
When a component transmits energy in the form of radiation, a spectrum of colors is produced on a photographic plate. This spectrum can be both continuous and discrete. The spectrum persists without distinction between two regions in a continuous spectrum. This represents the uninterrupted radiation emission and thus the uninterrupted emission of energy.
The line spectrum, on the other hand, is made up of discrete and sharp lines that show the emission of radiation in a specific amount over a specific time period, with a break between emission. As a result, the line spectra supports energy quantization.
To learn more about energy quantization: brainly.com/question/14327721
#SPj4
Electron affinity is the energy associated with the gain of an electron by an atom in the gaseous state. Which element will release the most energy when gaining an electron?.
The element which release most energy while gaining an electron is Chlorine.
Chlorine has a higher affinity for electrons than fluorine does, despite the fact that fluorine is intended to have halogens with higher electron affinity .Therefore, chlorine has the highest electron affinity among the all elements in the group.
When an electron is added to a neutral atom to create a negatively charged ion, how much energy is released. Only a few chemical elements, primarily the halogens, have values available since it is difficult to determine the affinities of atom’s electrons.
Low melting and boiling points characterize the halogens. They all react with hydrogen to create acids. Salts are easily formed when they react with metals. Their outer shell contains seven valence electrons.
To learn more about electron affinity, refer this link
https://brainly.com/question/1450671
#SPJ4
What is the hybridization of the xe atom in the xecl4 molecule?
a. sp
b. sp2
c. sp3
d. sp3 d
e. sp3 d 2
Answer:
sp3 d 2
Explanation:
At a distance of 17 km, a 136 hz horn, assumed to be an isotropic point source, is barely audible. at what distance would it begin to cause pain?
At a distance of 1.7 cm, the horn will begin to cause pain.
The source is an isotropic point source.
Let the distance at which the horn is barely audible be
[tex]r _2.[/tex]
[tex]r _2= 17 km[/tex]
Let the distance at which the horn will cause pain to be
[tex]r _2.[/tex]
[tex]A _{phere} = 4\pi \times r ^{2} [/tex]
The intensity ratio between barely audible and painful threshold is,
[tex]I = \frac{P }{A}[/tex]
[tex] \frac{I _2}{I _1 } = \frac{\frac{P}{4\pi \times r ^{2} _2 } }{ \frac{ P}{4\pi \times r ^{2} _1 }} [/tex]
[tex] = ( \frac{r _1 }{r _2 } ) ^{2} [/tex]
[tex]10 ^{ - 12} \: is \: ratio \: of \: the \: intensity [/tex]
between barely audible and painful threshold.
So,
[tex] \frac{I_2 }{I _1 } =( \frac{r _1 }{r _2 } ) ^{2} [/tex]
[tex] \frac{I_2 }{I _1 } = 10 ^{ - 12} [/tex]
[tex]r _2 = 17000 \: m[/tex]
The distance at which the horn will begin to cause pain is,
[tex]r _1 = r _2 \sqrt{10 ^{ - 12} } [/tex]
[tex]r _1 = 17000 \sqrt{10 ^{ - 12} } [/tex]
[tex]r _1 = 0.017 \: m[/tex]
[tex]r _1 = 1.7 \: cm[/tex]
Therefore, at a distance of 1.7 cm horn will begin to cause pain.
To know more about intensity, refer to the below link:
https://brainly.in/question/535414
#SPJ4
ecosystem A and wcosystem B have the same eight species, but ecosystem B has more distribution of species than ecosystem B. which ecosystem is mor diverse? expliain you reasoning.
Ecosystem A has more diversity, because it has greater species evenness than Ecosystem B.
Ecosystem :All the organisms and the physical setting they interact with make up an ecosystem. The nutrient cycles and energy flows connect these biotic and abiotic elements. Photosynthesis is how energy reaches the system and is absorbed by plant tissue.
Types of Ecosystem :Forest Ecosystem.
Grassland Ecosystem.
Tundra Ecosystem.
Desert Ecosystem.
What are the functions of ecosystem?Fundamentally, the way an ecosystem works is through the transfer of nutrients and energy up the food chain. The planet's plant and animal life, as well as the breakdown of organic matter and the creation of biomass, are all supported by these exchanges.
To know more about ecosystem :
https://brainly.com/question/13979184
#SPJ9
At what distance from the wire is the magnitude of the electric field equal to 2.41 n/cn/c ?
The correct answer is 1.07m.
The area surrounding an electric charge where its impact may be felt is known as the electric field. When another charge enters the field, the presence of an electric field may be felt. The electric field will either attract or repel the charge depending on its makeup. Any electric charge has a property known as the electric field. The charge and electrical force working in the field determine the strength or intensity of the electric field.
Here, is the charge per unit length, r is the distance from the wire, and
is the free space permittivity ε_0. Electric field due to the long straight wire is,
E= λ/2πε_0r
Rearrange the equation for r.
r=λ/2πε_0E
Substitute 2.41 N/C for E,
E=1.44×10^-10C/m
λ=8.85×10^-12C^2/Nm^2
r=(1.44×10^-10C/m)/(2(3.14)(8.85×10^-12C^2/Nm^2)(2.41N/C))
r=1.07m
At a distance of 1.07 m the magnitude of electric field is 2.41 N/C.
To learn more about electric field refer the link:
https://brainly.com/question/12821750
#SPJ4
Write the form of the partial fraction decomposition of the function (see example). do not determine the numerical values of the coefficients. (a) 7x (x 6)(3x 2)
We have the given equation as [tex]\frac{7x}{(x+6)(3x+2)}[/tex] that we have to convert through partial fraction decomposition.
What is Partial Fraction?The partial fraction decomposition or partial fraction expansion of a rational fraction in algebra is the process of expressing the fraction as the product of a polynomial (possibly zero) and one or more fractions with a simpler denominator.
A rational fraction is defined as one that has a polynomial as both the numerator and the denominator.
Theory and solutionWe have to find the form of the partial fraction decomposition of the function.
The given rational function has two factors in multiplication form in the denominator.
Also, the degree of the numerator is less than the denominator. Hence, the form of partial fraction decomposition of the function is:
[tex]\frac{7x}{(x+6)(3x+2)}[/tex] = [tex]\frac{A}{x+6} + \frac{B}{3x+2}[/tex]
To know more about Partial Fraction Decomposition, visit:
https://brainly.com/question/2516522
#SPJ4
7th GRADE SCIENCE QUESTION PLEASE ANSWER AS FAST AS YOU CAN I NEED IT (it can be 1 day late is fine... Ok I'll give you today like this minute and you can answer it when it is posted about 1-2 days but if you can answer it now that will be great)!!!
Question #1: State the role of a nucleus in a cell.
often a vector is specified by a magnitude and a direction; for example, a rope with tension t⃗ exerts a force of magnitude t
To study vectors it is best to select a coordinate system and manipulate it in that coordinate system and the component of A in x is 0.9396 while in y it is 0.342.
What is a vector?An item with both magnitude and direction is referred to be a vector.
A vector can be visualized geometrically as a straight spline, with a pointing in the orientation and a length equal to the value of the vector.
A vector has magnitude and direction so we can form a vector coordinate system and manipulate each vector in that such that it will be clear to study all vectors.
Given the vector A,
Magnitude |A| = 1 units
The angle of inclination from the x-axis is 20°.
Component of A in the x-axis ⇒
|A|cos20° = 1(0.9396) = 0.9396
Component of A in the y-axis ⇒
|A|sin20° =1(0.342) = 0.342
Hence "The component of A in x is 0.9396 while in y it is 0.342".
For more information about vector,
brainly.com/question/13322477
#SPJ4
Given question is incomplete with the missing image attached below;