powdered because it has more surface area which leads means there are more reactant particles exposed to collide, therefore the successful collision rate increases, resulting in an increased rate of reaction.
[tex]\sf \boxed{\sf fiery answererft}[/tex]
What are the key control points within the citric acid cycle?
The citrate synthase, isocitrate dehydrogenase, and the α-ketoglutarate dehydrogenase complex are the three key control points.
What are the key control points within the citric acid cycle?The key control points in citric acid cycle are the reactions catalyzed by citrate synthase, isocitrate dehydrogenase, and the α-ketoglutarate dehydrogenase complex.
So we can conclude that citrate synthase, isocitrate dehydrogenase, and the α-ketoglutarate dehydrogenase complex are the three key control points.
Learn more about cycle here: https://brainly.com/question/8283140
The citric acid cycle is a chemical cycle that releases stored energy. Citrate synthase, isocitrate dehydrogenase, and alpha-ketoglutarate dehydrogenase are the control point of the cycle.
What is a citric acid cycle?The citric acid cycle or the TCA cycle (tricarboxylic acid cycle) is the chemical series of reactions that releases energy from food sources like fats, carbohydrates, and proteins.
The TCA cycle includes enzymes and many substances that regulate it but three major points are Citrate synthase, isocitrate dehydrogenase, and alpha-ketoglutarate dehydrogenase.
Therefore, they get inhibited, regulated, and limit the rate of the reaction.
Learn more about the citric acid cycle here:
https://brainly.com/question/26362996
#SPJ4
8) If you apply a force of 50N to an object, but the object doesn't move,
how much WORK has been accomplished? Explain.
0 J
Work = Force * Displacement
Since displacement is 0 m (object isn't moving), work would also be 0.
Using the data below, what conclusion could you draw?
Car
Cara
Cars
Massi) Trial Time (3) Trial 2 Time(s).Trial 3 Time (s) Average Time (s)
15.5
4.7
49
47
4.8
20.2
3.3
2
3.1
28
79
59
5.6
5.8
Based on the data provided, the mass of the object is inversely proportional to acceleration and directly proportional to the time taken to cover the distance.
How does the mass of a object affect its acceleration?Given that the force applied on an object is constant, the acceleration of the object is inversely proportional to the mass of the object.
According to the Newton's second law of motion, the acceleration of an object is inversely proportional to the mass of the object and directly proportional to the force and takes place in the direction of the applied force.
Based on the data provided, the more mass the car has, the more time it takes to complete the distance.
Therefore, it can be concluded that the mass of the object is inversely proportional to acceleration and directly proportional to the time taken to cover the distance.
Learn more about mass and acceleration at: https://brainly.com/question/14344386
What is the molarity if 16. 0 grams of NaOH is dissolved in 855 mL of solution?
Answer:
734.0 grams
Explanation:
Because 16.0 and 855 mL it is 734.0 grams :) hope it helps
The molar mass of sucrose (c12h22o11) is 342.3 g/mol. a chemist has a 0.500-mol sample of sucrose. what is the mass, in grams, of this sample? 171 grams 342 grams 500 grams 684 grams
Mass is the measure of the quantity of the substance present in the sample containing a compound or molecule. The mass of sucrose in the sample is 171 g.
What is mass?The mass of the compound in the sample is the product of the number of moles of the substance and the molar mass of the compound.
Given,
The molar mass of the sucrose compound = 342.3 g/mol
Number of moles of sucrose = 0.500 moles
Mass of sucrose is calculated as:
[tex]\begin{aligned}\rm mass &= \rm moles \times molar \; mass\\\\&= 0.500 \;\rm moles \times 342.3 \;\rm g/mol\\\\&= 171.15 \;\rm gm\end{aligned}[/tex]
Therefore, option A. 171 gm is the mass of sucrose.
Learn more about mass here:
https://brainly.com/question/4058235
The correct answer is option A: 171 grams
Explanation: Got 90% on the quiz on edge and got this answer right
A company produces a colorless vinegar that is 5.0% HC2H3O2 in water. Using thymol blue as an indicator, a student titrates a 15.0-milliliter sample of the vinegar with 43.1 milliliters of a 0.30 M NaOH (aq) solution until the acid is neutralized. Identify the negative ion in the NaOH(aq) used in this titration.
The negative ion in aqueous sodium hydroxide, NaOH(aq) is hydroxide ion, OH-.
What is a neutralization reaction?A neutralization reaction is a reaction between an acid and a base to form salt and water only.
The reaction between vinegar and NaOH is a neutralization reaction which produces a salt and water only.
NaOH is composed of a positive sodium ion, Na+ and a negative hydroxide ion, OH-
Therefore, the negative ion in the NaOH(aq) used in this titration is hydroxide ion, OH-.
Learn more about hydroxide ion at: https://brainly.com/question/3078877
What is the effect on the total pressure inside a closed vessel if... a) More gas is added? b) The container's volume is increased?
(a) When more gas is added, the number of moles of the gas increases, and the total pressure of gas inside same vessel will increase.
(b) When the conatiner's volume is increased, the total pressure of gas inside the vessel will decrease.
Ideal gas lawThe ideal gas law of general gas equation, can be used to describe the behavior of an ideal gas.
The ideal gas law is given as;
PV = nRT
where;
P is pressure of the gasV is the volume of the gasn is the number of gas molesR is ideal gas constantT is temperature of the gasWhen more gas is added, the number of moles of the gas increases, and the total pressure of gas inside same vessel will increase.
When the conatiner's volume is increased, the total pressure of gas inside the vessel will decrease.
Learn more about ideal gas law here: https://brainly.com/question/12873752
how many molecules are required to produce 15.8 moles of no2
✥ So, in 1.25 moles of NO2, you would have 1.25 moles of N and (2 x 1.25) 2.50 moles of O.
0.1 mole = Avogadro's number of particles (approx. 6.022x10^23 particles/mol)
So, #oxygen atoms = 2.50 mol x 6.022x10^23 atoms/mol
6.022x10^23 atoms/molOr, approximately 1.51x10^24 oxygen atoms.
Hope this answer helps you ✨
Voluntary muscles
a.are muscles that work automatically.
b.are only in your arms and legs.
c.are muscles that you can control.
d.are muscles that push.
Answer: C.
Explanation:
Voluntary muscle are muscles that you can control.
Please help! How many isotopes are in arsenic?
Answer:
Arsenic (33As) has 33 known isotopes and at least 10 isomers.
what happens to a cell placed in an isotonic solution
Answer:
The cell's volume will remain stable.
Explanation:
If a cell is placed in an isotonic solution, there will be no net flow of water into or out of the cell, and the cell's volume will remain stable. If the solute concentration outside the cell is the same as inside the cell, and the solutes cannot cross the membrane, then that solution is isotonic to the cell.
what determines the role of an organism in an ecosystem?
Answer:
An organism's role within an ecosystem depends on how it obtains its food. Plants and animals obtain their food in very different ways, so they have very different roles in an ecosystem. The way in which an organism obtains food also affects its interactions with other organisms in the ecosystem.
Explanation:
The rusting of iron is represented by the equation 4Fe + 3O2 --> 2Fe2O3. If you have a 3.5-mol sample of iron, how many grams of O2 are needed to rust the iron completely?
34.9 g
84.0 g
16.5 g
48.6 g
Answer:
84.0 g
Balanced equation: 4Fe + 3O2 --> 2Fe2O3
3.5-mol sample of ironFind moles of oxygen:
4Fe : 3O24 : 3(3.5/4)*3 = 2.625 molesFind mass of O2
mass = moles * Mrmass = 2.625 * 32mass = 84 gConsider the combustion reaction for acetylene. 2c2h2(l) 5o2(g) right arrow. 4co2(g) 2h2o(g) if the acetylene tank contains 37.0 mol of c2h2 and the oxygen tank contains 81.0 mol of o2, what is the limiting reactant for this reaction? c2h2 o2 co2 h2o
The limiting reactant for the combustion reaction for acetylene is oxygen.
What is limiting reagent?Limiting reagents are those reagent which is present in less quantity as compared to the other reagent present for the formation of product.
Given chemical reaction is:
2C₂H₂(l) + 5O₂(g) → 4CO₂(g) + 2H₂O(g)
From the stoichiometry of the reaction, it is clear that:
2 moles of C₂H₂ = react with 5 moles of O₂
37 moles of C₂H₂ = react with 5/2×37=92.5 moles of O₂
And given moles of oxygen is 81 moles.
81 moles of O₂ = reacts with 2/5×81=32.4 moles of C₂H₂
And given moles of C₂H₂ = 81 moles.
Hence, O₂ is the limiting reagent.
To know more about limiting reagent, visit the below link:
https://brainly.com/question/14222359
Answer:
O2 is the limiting reactant.
A mixture of three gases has a total pressure of 94.5 kpa. if the partial pressure of
the 1st gas is 65.4 kpa and the partial pressure of the 2nd gas is 22.4 kpa, what is the
partial pressure of the 3rd gas of the mixture?
Answer: 6.7 kPa
Explanation:
Pressure Total = P(partial 1) + P(partial 2) + P(partial 3) →
94.5 kPa = 65.4 kPa + 22.4 kPa + P(partial 3) →
6.7 = P(partial 3) :)
According to the Dalton's law of partial pressures the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures exerted by each individual gas in the mixture.
So, P[tex]_o[/tex] = P[tex]_1[/tex]+ P[tex]_2[/tex]+ P[tex]_3[/tex]
[tex]\longrightarrow[/tex]94.5 = 65.4+ 22.4 + P[tex]_3[/tex]
[tex]\longrightarrow[/tex]94.5 = 87.8+ P[tex]_3[/tex]
[tex]\longrightarrow[/tex] P[tex]_3[/tex] = 94.5 - 87.8
[tex]\longrightarrow[/tex]P[tex]_3[/tex] = 6.7 kpa
Therefore, partial pressure of the 3rd gas of the mixture is 6.7 kpa .
Consider the equation for the formation of water. 2h2 o2 right arrow. 2h2o what is the theoretical yield of h2o if 130 g of h2o is produced from 18 g of h2 and an excess of o2? 18 g 81 g 130 g 160 g
The theoretical yield is the reaction yield that measures the product of the reaction from the conversion of the limiting reagent. The theoretical yield is 160 gm.
What is mass?Mass or the theoretical yield is the result of the multiplication of mole and the molar mass of the compound.
The reaction between hydrogen and oxygen is shown as,
[tex]\rm 2H_{2} + O_{2} \rightarrow 2H_{2}O[/tex]
Moles of water is calculated as:
[tex]\begin{aligned}\rm moles &= \rm \dfrac{mass}{molar\; mass}\\\\&= \dfrac{18}{2}\\\\&= 9\;\rm moles\end{aligned}[/tex]
The theoretical yield of water is calculated as:
[tex]\begin{aligned}\rm \text{weight of water} &= \rm moles \times molar \; mass\\\\&= 9 \times 18\\\\&= 162 \;\rm gm\end{aligned}[/tex]
Therefore, option D. 160 gm is the theoretical yield of water.
Learn more about theoretical yield here:
https://brainly.com/question/918691
How does the presence of a nucleus provide a method of basic cell classification?
Answer:
Sample Respond: The nucleus maintains the integrity of genes and controls the activities of the cell by regulating gene expression—the nucleus is, therefore, the control center of the cell.
good luck
Explanation:
I got 100 mark as brainiest
how many liters of water would it require to 36 grams of the substance?
3 liters
________________
Calculate the number of moles when 3.00l of a gas at 814 mmhg and 25 °c?
So
No of moles=n
[tex]\\ \rm\rightarrowtail PV=nRT[/tex]
[tex]\\ \rm\rightarrowtail n=\dfrac{PV}{RT}[/tex]
[tex]\\ \rm\rightarrowtail n=\dfrac{814(3)}{25R}[/tex]
[tex]\\ \rm\rightarrowtail n=2442/25R[/tex]
[tex]\\ \rm\rightarrowtail n=97.7Rmol[/tex]
How are oceans and salt marshes different? B A Salt marshes have deeper water than oceans. Salt marshes have shallower water than oceans. Salt marshes have more organisms than oceans. D . Salt marshes have more wave action than oceans. С
Answer:
Salt marshes have shallower water than oceans
Explanation:
oceans go way deeper then salt marshes with the deepest part of thr ocean at 35,876ft deep
Answer: Salt marshes have shallower water than oceans.
Explanation: oceans are deeper
Determine the mass of sodium acetate necessary to produce 100 ml of an acetate buffer
Explanation:
Ethanoic acid is a weak acid and dissociates:
C
H
3
C
O
O
H
⇌
C
H
3
C
O
O
−
+
H
+
For which
K
a
=
[
C
H
3
C
O
O
−
]
[
H
+
]
[
C
H
3
C
O
O
H
]
=
1.8
×
10
−
5
Please remember that these are equilibrium concentrations .
p
K
a
=
−
log
K
a
=
−
log
[
1.8
×
10
−
5
]
=
4.74
n
=
c
×
v
∴
n
C
H
3
C
O
O
H
=
0.20
×
200.0
1000
=
0.04
What do the neural pathways for taste, hearing, sight, and touch have in common
Answer:
All of the signals pass through the thalamus
Explanation:
In an atom the number of electrons is
as the
number of protons.
the only time electrons are equal to protons is when the charge is neutral. if the charge is positive then there's more protons.
if the charge is negative then there's more electrons.
Suppose object A has double the specific heat and triple the mass of object B. If the same amount of heat is applied to both objects, how will the temperature change of A be related to the temperature change of B? Enter your answer to three significant figures.
Taking into account the definition of calorimetry, the temperature change of A will be one sixth of the temperature change of B.
CalorimetryCalorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
Temperature change of A related to the temperature change of BIn this case, for object A:
QA = cA× mA× (ΔT)A
and for object B:
QB = cB× mB× (ΔT)B
You know:
Object A has double the specific heat of object B. ⇒ cA= 2× cB
Object A has triple the mass of object B. ⇒ mA= 3× mB
If the same amount of heat is applied to both objects ⇒ QA= QB
Then:
cA× mA× (ΔT)A= QB = cB× mB× (ΔT)B
2× cB × 3× mB× (ΔT)A= cB× mB× (ΔT)B
Solving:
6× cB × mB× (ΔT)A= cB× mB× (ΔT)B
(ΔT)A= (cB× mB× (ΔT)B) ÷ (6× cB × mB)
(ΔT)A=[tex]\frac{1}{6}[/tex] (ΔT)B
Finally, the temperature change of A will be one sixth of the temperature change of B.
Learn more about calorimetry:
brainly.com/question/11586486
brainly.com/question/24724338
brainly.com/question/14057615
brainly.com/question/24988785
brainly.com/question/21315372
brainly.com/question/13959344
brainly.com/question/14309811
brainly.com/question/23578297
write the name molecular and condensed formula of alkyl groups with the following number of carbons 1,2,3,4,5,6,7,8,9,10,11,12
1)
methyl
CH3 (mol)
CH3- (struc)
2)
ethyl
C2H5
CH3-CH2-
3)
propyl
C3H7
CH3-CH2-CH2-
4)
butyl
C4H9
CH3-CH2-CH2-CH2-
5)
pentyl
C5H11
CH3-CH2-CH2-CH2-CH2-
6)
hexyl
C6H13
CH3-CH2-CH2-CH2-CH2-CH2-
7)
heptyl
C7H15
CH3-CH2-CH2-CH2-CH2-CH2-CH2-
8)
octyl
C8H17
i will stop writing the condensed formula ust add another CH2
9)
nonyl
C9H19
10)
decyl
C10H21
11)
Undecyl
C11H23
12)
dodecyl
C12H25
What is the molarity of a solution formed when you add 200. Ml of water to 50. Ml of 5. 0 m hcl
The molarity of a solution formed when you add 200 mL of water to 50 mL of 5. 0 M HCl is 1.25M.
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
M1V1 = M2V2
Where;
M1 = molarity of a baseM2 = molarity of acidV1 = volume of baseV2 = volume of acidM1 × 200 = 50 × 5
200M1 = 250
M1 = 250/200
M1 = 1.25M
Therefore, the molarity of a solution formed when you add 200 mL of water to 50 mL of 5. 0 M HCl is 1.25M.
Learn more about molarity at: https://brainly.com/question/12127540
Explain why Na, Mg, and Al are good conductors of electricity?
The acid dissociation constant of alloxanic acid is. Calculate the ph of a solution of alloxanic acid. Round your answer to decimal place
Answer:
The pH of a 4.4 M solution of boric acid is 4.3
Explanation:
at t=0 cM 0 0
at eqm
So dissociation constant will be:
Give c= 4.4 M and = ?
Putting in the values we get:
Also
Thus pH of a 4.4 M solution is 4.3
Which plants have a fibrous root system? (Select all that apply.) grass dandelion carrot corn
The plants which have a fibrous root system are
GrassCornWhat is a fibrous root?A fibrous root system is a root system which consists of large mass of roots of nearly equal size
Some few examples of plants with fibrous roots system are as follows:
Rice plantsSugarcane plantsOnionsPinesAsparagusMaizeIn conclusion; the plants which have a fibrous root system are grasses and corns.
Learn more about fibrous root system:
https://brainly.com/question/1600214
hello people~
Polyethylene terephthalate belongs to which class of synthetic polymer?
A. None of these
B. Polyolefin
C. Nylon
D. Polyester
Answer:
Polyester
Explanation:
Polyethylene terephthalate or shortly known as PET its a clean and strong polyesterIt is used in packaging