as the tides change, the water level in a bay varies sinusoidally. at high tide today at 8 a.m., the water level was 15 feet; at low tide, 6 hours later at 2 pm, it was 3 feet. how fast, in feet per hour, was the water level dropping at noon today?

a. The cost of installing 40 ft² of countertop is $800.

b. The cost of installing an extra 12 ft² after 40 ft² has already been installed is $552.

a) To find the cost of installing 40 ft² of countertop, we can evaluate the integral of C'(x) over the interval [0, 40]:

C(40) = ∫[0, 40] C'(x) dx

Since C'(x) = x, we can substitute this into the integral:

C(40) = ∫[0, 40] x dx

Evaluating the integral, we get:

C(40) = [x²/2] evaluated from 0 to 40

= (40²/2) - (0²/2)

= 800 - 0

= 800 dollars

Therefore, the cost of installing 40 ft² of countertop is $800.

b) To find the cost of installing an extra 12 ft² after 40 ft² has already been installed, we can subtract the cost of installing 40 ft² from the cost of installing 52 ft²:

C(40 + 12) - C(40) = ∫[40, 52] C'(x) dx

Since C'(x) = x, we can substitute this into the integral:

C(40 + 12) - C(40) = ∫[40, 52] x dx

Evaluating the integral, we get:

C(40 + 12) - C(40) = [x²/2] evaluated from 40 to 52

= (52²/2) - (40²/2)

= 1352 - 800

= 552 dollars

Therefore, the cost of installing an extra 12 ft² after 40 ft² has already been installed is $552.

To know more about integrate check the below link:

brainly.com/question/27419605

#SPJ11

To find the minimum value of the function f(x, y) = x² + y² subject to the constraint xy = 15, we can use the method of Lagrange multipliers.

Let's define the Lagrangian function L(x, y, λ) as L(x, y, λ) = f(x, y) - λ(xy - To find the minimum value, we need to solve the following system of equations:

∂L/∂x = 2x - λy = 0

∂L/∂y = 2y - λx = 0

∂L/∂λ = xy - 15 = 0

From the first equation, we get x = (λy)/2. Substituting this into the second equation gives y - (λ²y)/2 = 0, which simplifies to y(2 - λ²) = 0. This gives us two possibilities: y = 0 or λ² = 2.

If y = 0, then from the third equation we have x = ±√15. Plugging these values into f(x, y) = x² + y², we find that f(√15, 0) = 15 and f(-√15, 0) = 15.

If λ² = 2, then from the first equation we have x = ±√30/λ and from the third equation we have y = ±√30/λ. Plugging these values into f(x, y) = x² + y², we find that f(√30/λ, √30/λ) = 2λ²/λ² + 2λ²/λ² = 4.

Therefore, the minimum value of the function f(x, y) = x² + y² subject to the constraint xy = 15 is 4.

To learn more about  constraints click here: brainly.com/question/32387329

#SPJ11

Answer:

Step-by-step explanation:

the sequence is arithmetic it goes up consistently

You put 15 where n is so the problem would look like an=32(0.98)^n-1

The pants converge

His pants will be very long it is not reasonable

The mean value of X is approximately 12.375 and the standard deviation is approximately 2.255.

X follows a negative binomial distribution with parameters r = 6 and p = 8/17. This distribution models the number of trials needed to obtain the eighth success in a sequence of Bernoulli trials, where each trial has a success probability of 8/17.

To compute P(X = 4), we can use the probability mass function of the negative binomial distribution:

P(X = 4) = (6-1)C(4-1) * (8/17)^4 * (9/17)^(6-4) ≈ 0.1747.

P(X < 4) is the cumulative distribution function evaluated at x = 3:

P(X < 4) = Σ(i=0 to 3) [(6-1)C(i) * (8/17)^i * (9/17)^(6-i)] ≈ 0.2933.

P(X > 4) can be calculated as 1 - P(X ≤ 4):

P(X > 4) = 1 - P(X ≤ 4) = 1 - Σ(i=0 to 4) [(6-1)C(i) * (8/17)^i * (9/17)^(6-i)] ≈ 0.5320.

To compute the mean value of X, we can use the formula for the mean of a negative binomial distribution:

mean = r/p ≈ 6/(8/17) ≈ 12.375.

The standard deviation of X can be calculated using the formula for the standard deviation of a negative binomial distribution:

standard deviation = sqrt(r * (1-p)/p^2) ≈ sqrt(6 * (1-(8/17))/(8/17)^2) ≈ 2.255.

Therefore, the mean value of X is approximately 12.375 and the standard deviation is approximately 2.255.

know more about binomial distribution click here:

https://brainly.com/question/29137961

#SPJ11

None of the provided options matches the calculated value. To find the value of the expression [yxd2], we need to evaluate the double integral over the region R.

The expression [yxd2]suggests integration with respect to both x and y.

The region R is bounded below by the parabola y = x² and above by the line y = 2. We need to find the points of intersection between these curves to determine the limits of integration.

Setting y = x² and y = 2 equal to each other, we have:

x² = 2

Solving this equation, we find two solutions: x = ±√2. However, we are only interested in the region in the first quadrant, so we take x = √2 as the upper limit.

Thus, the limits of integration for x are from 0 to √2, and the limits of integration for y are from x² to 2.

Now, let's set up the double integral:

[yxd2]=∫∫RyxdA

Since the integrand is yx, we reverse the order of integration:

[yxd2]=∫₀²∫ₓ²²yxdydx

Integrating with respect to y first, we have:

[yxd2]=∫₀²[∫ₓ²²yxdy]dx

The inner integral becomes:

∫ₓ²²yxdy=[1/2y²x]ₓ²²=(1/2)(22x²−x⁶)

Substituting this back into the outer integral, we have:

[yxd2]=∫₀²(1/2)(22x²−x⁶)dx

Evaluating this integral:

[yxd2]=(1/2)[22/3x³−1/7x⁷]ₓ₀²

= (1/2) [22/3(2³) - 1/7(2⁷) - 0]

= (1/2) [352/3 - 128/7]

= (1/2) [(11776 - 2432)/21]

= (1/2) [9344/21]

= 4672/21

Therefore, the value of [yx d^2] is 4672/21.

None of the provided options matches the calculated value.

Learn more about parabola here:

https://brainly.com/question/11911877

#SPJ11

The area of region R, bounded by the parabola [tex]y=4-x^{2}[/tex] and the line [tex]y = 1[/tex] in the first quadrant, is [tex]2\sqrt{3}[/tex] square units. The correct answer is the third option.

To find the area of region R, we need to determine the points where the parabola and the line intersect. Setting y equal to each other, we get [tex]4 - x^{2} = 1[/tex]. Rearranging the equation gives [tex]x^{2} =3[/tex], which implies [tex]x=\pm\sqrt{3}[/tex]. Since we are only considering the first quadrant, the value of [tex]x[/tex] is [tex]\sqrt{3}[/tex].

To calculate the area, we integrate the difference between the two functions, with x ranging from [tex]0[/tex] to [tex]\sqrt{3}[/tex]. The equation becomes [tex]\int\ {(4-x^{2}-1 ) dx[/tex] from [tex]0[/tex] to [tex]\sqrt{3}[/tex]. Simplifying, we have [tex]\int\ {(3-x^{2} ) dx[/tex] from [tex]0[/tex] to [tex]\sqrt{3}[/tex]. Integrating this expression gives [tex][3(x) - (x^{3} /3)][/tex] evaluated from [tex]0[/tex] to [tex]\sqrt{3}[/tex].

Plugging in the values, we get [tex][3\sqrt{3} - (\sqrt{3}^{3} /3)]-[3(0) - (0^{3} /3)][/tex]. This simplifies to [tex][3\sqrt{3} - (\sqrt{3}^{3} /3)][/tex]. Evaluating further, we have [tex][3\sqrt{3} - (\sqrt{3}^{3} /3)] = [3\sqrt{3} - (\sqrt{27}/3)] = [3\sqrt{3} - \sqrt{9}] = [3\sqrt{3} - 3] = 3(\sqrt{3} - 1)[/tex].

Therefore, the area of region R is [tex]3(\sqrt{3} - 1)[/tex]square units, which is equivalent to [tex]2\sqrt{3}[/tex] square units.

Learn more about parabola here:

https://brainly.com/question/11911877

#SPJ11

F · n = (xy² + 3xz) ∂f/∂x + (x²y + y³) ∂f/∂y + (3x²z - z²) ∂f/∂z dot product over the surface S

To find the surface integral of F over the given surface S, we need to evaluate the flux of F through the surface S.

First, we calculate the outward unit normal vector n to the surface S. Since S lies between the cylinders x² + y² = 4 and x² + y² = 36, and between the planes z = ±2, the normal vector n will have components that correspond to the direction perpendicular to the surface S.

Using the gradient operator ∇, we can find the normal vector:

n = ∇f/|∇f|

where f(x, y, z) is the equation of the surface S.

Next, we compute the dot product between F and n:

F · n = (xy² + 3xz) ∂f/∂x + (x²y + y³) ∂f/∂y + (3x²z - z²) ∂f/∂z

Finally, we integrate this dot product over the surface S using appropriate limits based on the given region.

Since the detailed equation for the surface S is not provided, it is difficult to proceed further without specific information about the surface S. Additional information is required to determine the limits of integration and evaluate the surface integral of F over S.

To learn more about integral  click here

brainly.com/question/31059545

#SPJ11

Option a is not a requirement for a probability distribution. Numerical variables need not be strictly required to be associated with probability distributions.

The necessities for a likelihood dissemination are:

b. All probabilities add up to 1: The normalization condition refers to this. All possible outcomes must have probabilities that add up to one in a probability distribution. This guarantees that the distribution accurately reflects all possible outcomes.

c. Between 0 and 1, each probability value is found: Probabilities cannot have negative values because they must be non-negative. Additionally, because they represent the likelihood of an event taking place, probabilities cannot exceed 1. As a result, every probability value needs to be between 0 and 1.

d. The probability of each value of the random variable x must be the same: In a discrete likelihood circulation, every conceivable worth of the irregular variable high priority a relating likelihood. This requirement ensures that the distribution includes all possible outcomes.

Option a is not a requirement for a probability distribution. Numerical variables need not be strictly required to be associated with probability distributions. It is also possible to define probability distributions for qualitative or categorical variables.

To know more about Probabilities refer to

https://brainly.com/question/32117953

#SPJ11

The volume of the resulting solid obtained by rotating region Q around the y-axis is (19π)/6 cubic units.

The volume of the resulting solid obtained by rotating the region Q bounded by the functions f(x) = x and g(x) = 2x in the first quadrant between y = 2 and y = 3 around the y-axis can be calculated using the method of cylindrical shells.

To find the volume, we can divide the region Q into infinitesimally thin cylindrical shells and sum up their volumes. The volume of each cylindrical shell is given by the formula V = 2πrhΔy, where r is the distance from the axis of rotation (in this case, the y-axis), h is the height of the shell, and Δy is the thickness of the shell.

In region Q, the radius of each shell is given by r = x, and the height of the shell is given by h = g(x) - f(x) = 2x - x = x. Therefore, the volume of each shell can be expressed as V = 2πx(x)Δy = 2πx^2Δy.

To calculate the total volume, we integrate this expression with respect to y over the interval [2, 3] since the region Q is bounded between y = 2 and y = 3.

V = ∫[2,3] 2πx^2 dy

To determine the limits of integration in terms of y, we solve the equations f(x) = y and g(x) = y for x. Since f(x) = x and g(x) = 2x, we have x = y and x = y/2, respectively.

The integral then becomes:

V = ∫[2,3] 2π(y/2)^2 dy

V = π/2 ∫[2,3] y^2 dy

Evaluating the integral, we have:

V = π/2 [(y^3)/3] from 2 to 3

V = π/2 [(3^3)/3 - (2^3)/3]

V = π/2 [(27 - 8)/3]

V = π/2 (19/3)

Therefore, the volume of the resulting solid obtained by rotating region Q around the y-axis is (19π)/6 cubic units.

In conclusion, by using the method of cylindrical shells and integrating over the appropriate interval, we find that the volume of the resulting solid is (19π)/6 cubic units.

To learn more about functions, click here: brainly.com/question/11624077

#SPJ11

This equation is an example of the associative law in mathematics, and the given symbolic equation is true.

The given symbolic equation is: [tex]Pv (Q ^R)=(PvQ)^R[/tex].

The question is if this equation is true or not and whether this equation is an example of the associative law in mathematics. Symbolic equation is a mathematical equation with symbols instead of numbers, and associative law is one of the basic laws of mathematics. In mathematics, the associative law states that the way in which factors are grouped in a multiplication problem does not affect the answer.

The equation: [tex]Pv (Q ^R)=(PvQ)^R[/tex] is true and it is an example of the associative law in mathematics. The associative law can be applied to various mathematical operations, including addition, multiplication, and others. It is a fundamental property of mathematics that is useful in solving equations and simplifying expressions.

To learn more about associative law click here https://brainly.com/question/30981052

#SPJ11

The probability that the first "4" will be the 8th digit generated on the TI-83 calculator is approximately 0.048, as calculated using the geometric probability formula. (option c)

To explain this calculation, we can consider the probability of generating a "4" on a single trial. Since the student is randomly generating 1-digit numbers, there are a total of 10 possible outcomes (0 to 9), and only one of these outcomes is a "4". Therefore, the probability of generating a "4" on any given trial is 1/10 or 0.1.

Since the student is generating digits one at a time, we can model the situation as a geometric distribution. The probability that the first success (i.e., the first "4") occurs on the kth trial is given by the geometric probability formula: P(X=k) = (1-p)^(k-1) * p, where p is the probability of success and k is the number of trials.

In this case, we want to find the probability that the first "4" occurs on the 8th trial. So we plug in p=0.1 and k=8 into the formula: P(X=8) = (1-0.1)^(8-1) * 0.1 = 0.9^7 * 0.1 ≈ 0.0478.

Therefore, the probability that the first "4" will be the 8th digit generated is approximately 0.048, which corresponds to option (c) in the given choices.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The integral of cos(x) dx from 0 to 65 is 0. This is because the integral of cos(x) over a full period (2π) is 0, and since 65 is a multiple of 2π, the integral evaluates to 0.

The function cos(x) has a periodicity of 2π, meaning that it repeats itself every 2π units. The integral of cos(x) over a full period (from 0 to 2π) is 0. Therefore, if the interval of integration is a multiple of 2π, like in this case where it is 65, the integral will also evaluate to 0. This is because the function completes several cycles within that interval, canceling out the positive and negative areas and resulting in a net value of 0.

Learn more about evaluates here:

https://brainly.com/question/14677373

#SPJ11

The number of bundles to be used to make one block of cardboard is 8 bundles.

We shall convert the measurements to a consistent unit in order to estimate the number of bundles used to make one block of cardboard.

Now, we convert the height of the bundles and the block into the same unit like centimeters.

Given:

Height of each bundle = 150 mm = 15 cm

Height of one block = 1.2 meters = 120 cm

Next, we divide the height of the block by the height of each bundle to find the number of bundles:

Number of bundles = Height of block / Height of each bundle

Number of bundles = 120 cm / 15 cm = 8 bundles

Therefore, it takes 8 bundles to make one block of cardboard.

Learn more about measurements at brainly.com/question/26160352

#SPJ1

Question completion:

Your question is incomplete, but most probably your full question was:

The 150mm bundles are stacked and tied into blocks that are 1.2 meters high. how many bundles are used to make one block of cardboard​

One possible test we can use is the integral test. However, in this case, the integral test does not give us a simple solution.

To determine whether the series ∑(n/(n + 5)), n = 1 to infinity, converges or not, we can use the limit comparison test.

Let's compare the given series to the harmonic series ∑(1/n), which is a well-known divergent series.

Taking the limit as n approaches infinity of the ratio of the terms of the two series, we have:

lim(n→∞) (n/(n + 5)) / (1/n)

= lim(n→∞) (n^2)/(n(n + 5))

= lim(n→∞) n/(n + 5)

= 1

Since the limit is a nonzero finite value (1), the series ∑(n/(n + 5)) cannot be determined to be either convergent or divergent using the limit comparison test.

Learn more about the series here:

https://brainly.com/question/31501959

#SPJ11

The Cartesian coordinates for the polar coordinate (6, π/6) is:

(3√3, 3)

To convert polar coordinates  (r, θ) to Cartesian coordinates  (x, y). Use the following relations:

x = rcosθ

y = rsinθ

We have:

(r, θ) = (6, π/6)

x = 6 cos (π/6)

x = 6 * √3/2

x =  3√3

y = 6 sin (π/6)

y = 6 * 1/2

y = 3

Therefore, the corresponding Cartesian coordinates for (6, π/6) is (3√3, 3)

Learn more about polar coordinates on:

brainly.com/question/14965899

#SPJ1

Complete Question

Convert the polar coordinate (6, π/6), to Cartesian coordinates.

Enter exact values.

X =

y =

The critical points are approximately (-1.225, -4.097) and (1.225, 3.097).

To find the derivative of the function f(x) = -2x³ + 9x, we differentiate term by term using the power rule:

(a) Differentiating f(x):f'(x) = d/dx (-2x³) + d/dx (9x)

      = -6x² + 9

(b) To find the critical values, we need to find the values of x for which f'(x) = 0.Setting f'(x) = -6x² + 9 to 0 and solving for x:

-6x² + 9 = 06x² = 9

x² = 9/6x² = 3/2

x = ±√(3/2)x ≈ ±1.225

The critical values are x ≈ -1.225 and x ≈ 1.225.

(c)

find the critical points, we substitute the critical values into the original function f(x):

For x ≈ -1.225:f(-1.225) = -2(-1.225)³ + 9(-1.225)

         ≈ -4.097

For x ≈ 1.225:f(1.225) = -2(1.225)³ + 9(1.225)

        ≈ 3.097

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

The Lagrange multiplier approach can be used to determine the global extrema of the function (f(x, y, z) = 5x + 4y + 3z) subject to the b(x2 + y2 + z2 = 100).

The Lagrangian function is first built up as follows: [L(x, y, z, lambda) = f(x, y, z) - lambda(g(x, y, z) - c)]. Here, g(x, y, z) = x2 + y2 + z2 is the constraint function, while c = 100 is the constant.

The partial derivatives of (L) with respect to (x), (y), (z), and (lambda) are then determined and set to zero:

Fractal partial L partial x = 5 - 2 lambda partial x = 0

Fractal partial L partial y = 4 - 2 lambda partial y = 0

Fractal partial L partial z = 3 - 2 lambda partial z = 0

Fractal L-partial lambda = g(x, y, z) - c = 0

We can determine from the first three equations

learn more about multiplier here :

https://brainly.com/question/620034

#SPJ11

the solutions to the equation Cos 2x + Sin X = 1 for 0 < X < 360 are x = 0°, x = 180°, x = 210°, and x = 330°.

Starting with the equation "Cos 2x + Sin X = 1," we can use the double-angle identity for cosine, which states that "Cos 2x = 1 - 2 Sin² x." Substituting this into the equation gives "1 - 2 Sin² x + Sin x = 1," which simplifies to "- 2 Sin² x + Sin x = 0." Now, we have the equation in the form "K Sin² x - Sin x = 0," where K = -2.

To solve the equation "K Sin² x - Sin x = 0" for 0 < X < 360, we factor out the common term of Sin x: Sin x (K Sin x - 1) = 0. This equation is satisfied when either Sin x = 0 or K Sin x - 1 = 0.

For Sin x = 0, the solutions are x = 0° and x = 180°.

For K Sin x - 1 = 0 (where K = -2), we have -2 Sin x - 1 = 0, which gives Sin x = -1/2. The solutions for this equation are x = 210° and x = 330°.

Therefore, the solutions to the equation Cos 2x + Sin X = 1 for 0 < X < 360 are x = 0°, x = 180°, x = 210°, and x = 330°.

Learn more about Substitution here:

https://brainly.com/question/22340165

#SPJ11

The line of intersection can be re-written in the form of the vector equation as; r=(1,1,1) + t(-1,-5,0)

The vector equation for the line of intersection of the planes 5x - 3y - 2z = –2 and 5x + z = 5 r= ,0) + (-3, > is given as;

r=(1,1,1) + t(-1,-5,0)

In order to derive the equation above, we need to solve the system of equations by using the elimination method, which involves eliminating one of the variables to obtain an equation in two variables.

Therefore, we solve the planes as follows;

5x - 3y - 2z = –2... [1]

5x + z = 5 ...[2]

From equation [2], we can solve for z as follows; z = 5 - 5x

Substitute this into equation [1]; 5x - 3y - 2(5 - 5x) = –2

5x - 3y - 10 + 10x = –2

15x - 3y = 8

5x - y = \frac{8}{3}

Therefore, we can write the equation of the line of intersection as;

x = 1-t

y = 1 -5t

z = 1

To learn more about planes click here https://brainly.com/question/2400767

#SPJ11

The values of m for which ye is a solution of the given differential equation y + 5y = 0 are m = -5.

To determine the values of m that make ye a solution of the differential equation y + 5y = 0, we substitute ye into the equation and solve for m.

Substituting ye into the differential equation gives us e^m + 5e^m = 0. To solve this equation, we can factor out e^m from both terms: e^m(1 + 5) = 0. Simplifying further, we have e^m(6) = 0.

For the equation e^m(6) = 0 to hold true, either e^m must equal 0 or the coefficient 6 must equal 0. However, e^m is always positive and never equal to zero for any real value of m. Therefore, the only way for the equation to be satisfied is if the coefficient 6 is equal to zero.

Since 6 is not equal to zero, there are no values of m that satisfy the equation e^m(6) = 0. Therefore, there are no values of m for which ye is a solution of the given differential equation y + 5y = 0.

Learn more about differential equation here:

https://brainly.com/question/25731911

#SPJ11

Jill needs to invest approximately $40,816.33 at a 7% annual interest rate compounded yearly to achieve her goal of $50,000 for a round-the-world holiday in 3 years.

We can use the formula for compound interest:

A = P(1 + r/n)^(nt)

Where

We can rearrange the formula to solve for P:

P = A / (1 + r/n)^(nt)

Now we can substitute the given values into the formula and calculate:

P = 50000 / (1 + 0.07/1)^(1*3)

P = 50000 / (1 + 0.07)^3

P = 50000 / (1.07)^3

P = 50000 / 1.2250431

P ≈ $40,816.33

Therefore, Jill needs to invest approximately $40,816.33 at a 7% annual interest rate compounded yearly to achieve her goal of $50,000 for a round-the-world holiday in 3 years.

Learn more about compound interest here : brainly.com/question/30364118

#SPJ1

A. the break-even quantity is 5 units. B. the profit from 490 units is $7,760. C. the number of units that must be produced for a profit of $160 is 15 units.

a. To find the break-even quantity, we need to set the cost equal to the revenue and solve for x:

C(x) = R(x)

12x + 80 = 28x

80 = 16x

x = 5

Therefore, the break-even quantity is 5 units.

b. To find the profit from 490 units, we need to calculate the revenue and subtract the cost:

R(490) = 28 * 490 = $13,720

C(490) = 12 * 490 + 80 = $5,960

Profit = Revenue - Cost = $13,720 - $5,960 = $7,760

Therefore, the profit from 490 units is $7,760.

c. To find the number of units that must be produced for a profit of $160, we can set the profit equation equal to $160 and solve for x:

Profit = Revenue - Cost

160 = 28x - (12x + 80)

160 = 16x - 80

240 = 16x

x = 15

Therefore, the number of units that must be produced for a profit of $160 is 15 units.

Learn more about break-even quantity at https://brainly.com/question/15281855

#SPJ1

To calculate the amount that Echam needs to save in a bank every month for the next 6 years, we need to know the desired accumulated amount. Since the desired amount is not provided, we cannot provide a specific savings amount.

To determine the savings amount, we need to use the formula for future value of a series of deposits, given by:

FV = P * [(1 + r)^n - 1] / r

Where:

FV is the desired future value (accumulated amount)

P is the monthly deposit amount

r is the interest rate per compounding period

n is the number of compounding periods

In this case, the interest is compounded every two months, so the number of compounding periods (n) would be 6 years * 6 compounding periods per year = 36 compounding periods.

To find the monthly deposit amount (P), we need to rearrange the formula and solve for P:

P = FV * (r / [(1 + r)^n - 1])

By plugging in the desired accumulated amount, interest rate, and number of compounding periods, we can calculate the monthly savings amount needed to reach the goal over the given time period.

Learn more about amount here : brainly.com/question/32202714

#SPJ11

After considering the given data we conclude that the nth Term Divergence Test, the given series diverge since the limit of the nth term as n approaches infinity is not equal to zero in each case. As seen below

17. can't reach zero as n comes to infinity.

18. couldn't reach zero as n approaches infinity.

19. haven't gone to zero as n approaches infinity.

20. will not approach zero as n approaches infinity.

21. won't not approach zero as n approaches infinity.

22. cannot approach zero as n approaches infinity

To show prove that the given series diverges applying the nth Term Divergence Test, we have to show that the limit of the nth

term as n approaches infinity is not equal to zero.

17. The series 100 + 12n diverges cause the nth term, 12n, does not approach zero as n approaches infinity.

18. The series [tex](8 ^{(n+1)})/(3^n)[/tex] diverges cause the nth term,   does not approach zero as n approaches infinity.

19. The series [tex]1/(n^{2/3})[/tex] diverges cause the nth term,  does not approach zero as n approaches infinity.

20. The series [tex](-1)^{n-1}/n[/tex] diverges due to the nth term, , does not approach zero as n approaches infinity.

21. The series cos(n)/n diverges cause  the nth term, cos(n)/n, does not approach zero as n approaches infinity.

22. The series [tex](A^{(n+1)} - n) /(10^n)[/tex] diverges due to the nth term, does not approach zero as n approaches infinity.

In each case, the nth term does not tend to zero, indicating that the series diverges.

To Learn more about Divergence

brainly.com/question/17177764

#SPJ4

The complete question is:

If one in every 9 people in the town vote for party A, then the remaining 8 out of 9 people would vote for party B. Therefore, we can calculate the number of people who vote for party B by multiplying the total number of people in the town by 8/9.
So, in a town of 810 people, 720 people would vote for party B, while the remaining 90 people would vote for party A.
In a town of 810 people, one in every 9 people votes for party A, and all others vote for party B. To find the number of people voting for party B, first, calculate the number of people voting for party A: 810 / 9 = 90 people. Since the remaining people vote for party B, subtract the number of party A voters from the total population: 810 - 90 = 720 people. or 810 x (8/9) = 720. Therefore, 720 people in the town vote for Party B.

To learn more about vote, visit:

https://brainly.com/question/32300258

#SPJ11

The sum of vectors is <5,2>.

What is the vector?

A vector is a number or phenomena with two distinct properties: magnitude and direction. The term can also refer to a quantity's mathematical or geometrical representation. In nature, vectors include velocity, momentum, force, electromagnetic fields, and weight.

The given vectors are <-1,4> and <6,-2>.

We need to find the sum of the given vectors and illustrate them geometrically.

Plot the point (-1,4) on a coordinate plane and draw a vector <a> from (0,0) to (-1,4).

Plot the point (6,-2) on a coordinate plane and draw a vector <b> from (0,0) to (6,-2).

Now complete the parallelogram and the diagonal represents the sum of both vectors.

<-1,4> +  <6,-2> = < -1+6, 4-2>

= <5,2>

The endpoint of the diagonal is (5,2).

Hence,  the sum of vectors is <5,2>.

To learn more about the vector from the given link

https://brainly.com/question/30854499

#SPJ4

The average velocities over the given intervals are: a. 15.85 m/s, b. 20.6 m/s, c. 20.85 m/s, d. 24.97 m/s.

Determine the change in height and time interval for each interval.

Given the formula for height as s(t) = -4.9t^2 + 45t, we need to calculate the change in height and the time interval for each specified interval.

Calculate the average velocity for each interval.

To find the average velocity, we divide the change in height by the corresponding time interval. This gives us the average rate of change of height over that interval.

Then, calculate the average velocities for each interval.

a. From t=1 to t=3:

The change in height is s(3) - s(1) = (-4.9(3)^2 + 45(3)) - (-4.9(1)^2 + 45(1)) = 64.8 - 33.1 = 31.7 m.

The time interval is 3 - 1 = 2 seconds. Average velocity = 31.7 m / 2 s = 15.85 m/s.

b. From t=2 to t=3:

The change in height is s(3) - s(2) = (-4.9(3)^2 + 45(3)) - (-4.9(2)^2 + 45(2)) = 64.8 - 44.2 = 20.6 m.

The time interval is 3 - 2 = 1 second. Average velocity = 20.6 m / 1 s = 20.6 m/s.

c. From t=2.5 to t=3:

The change in height is s(3) - s(2.5) = (-4.9(3)^2 + 45(3)) - (-4.9(2.5)^2 + 45(2.5)) = 64.8 - 54.375 = 10.425 m.

The time interval is 3 - 2.5 = 0.5 seconds. Average velocity = 10.425 m / 0.5 s = 20.85 m/s.

d. From t=2.9 to t=3:

The change in height is s(3) - s(2.9) = (-4.9(3)^2 + 45(3)) - (-4.9(2.9)^2 + 45(2.9)) = 64.8 - 62.303 = 2.497 m.

The time interval is 3 - 2.9 = 0.1 seconds. Average velocity = 2.497 m / 0.1 s = 24.97 m/s.

Now, close to t=3, the average velocities are decreasing. This suggests that the projectile is slowing down as it approaches its highest point.

This is expected because the height function is a quadratic equation, and the vertex of the parabolic path represents the maximum height reached by the projectile.

As the time approaches t=3, the projectile is nearing its peak and experiencing a decrease in velocity.

ii. To calculate the instantaneous rate of change (velocity) at t=4

Learn more about Average velocity

https://brainly.com/question/2851207

#SPJ11

Therefore, the standard deviation of this probability distribution is approximately 1.053 when rounded to two decimal places.

To find the standard deviation of a probability distribution, we can use the formula:

Standard deviation (σ) = √[Σ(x - μ)²P(x)]

Where:

x: The value in the distribution

μ: The mean of the distribution

P(x): The probability of x occurring

Let's calculate the standard deviation using the given values:

x P(x)

0 0.1

1 0.15

2 0.1

3 0.65

First, calculate the mean (μ):

μ = Σ(x * P(x))

μ = (0 * 0.1) + (1 * 0.15) + (2 * 0.1) + (3 * 0.65)

= 0 + 0.15 + 0.2 + 1.95

= 2.3

Next, calculate the standard deviation (σ):

σ = √[Σ(x - μ)²P(x)]

σ = √[(0 - 2.3)² * 0.1 + (1 - 2.3)² * 0.15 + (2 - 2.3)² * 0.1 + (3 - 2.3)² * 0.65]

σ = √[(5.29 * 0.1) + (1.69 * 0.15) + (0.09 * 0.1) + (0.49 * 0.65)]

σ = √[0.529 + 0.2535 + 0.009 + 0.3185]

σ = √[1.109]

σ ≈ 1.053

To know more about standard deviation,

https://brainly.com/question/15707616

#SPJ11

The result of the indefinite integral ∫scos(la274(n=72))dx is -s(sin(la274(n=72))) / la274(n=72) + C.

The indefinite integral ∫dr can be evaluated as r + C, where C is the constant of integration.

To evaluate this integral using u-substitution, we can let u = r. Since there is no expression involving r that needs to be simplified, the integral becomes ∫du.

Integrating with respect to u gives us u + C, which is equivalent to r + C.

Therefore, the result of the indefinite integral ∫dr is r + C.

(b) The indefinite integral ∫scos(la274(n=72))dx can be evaluated by substituting u = la274(n=72).

Let's assume that the limits of integration are not provided in the question. In that case, we will focus on finding the antiderivative of the given expression.

Using the u-substitution, we have du = la274(n=72)dx. Rearranging, we find dx = du/la274(n=72).

Substituting these values into the integral, we have ∫scos(u) * (du/la274(n=72)).

Integrating with respect to u gives us -s(sin(u)) / la274(n=72) + C.

Finally, substituting back u = la274(n=72), we get -s(sin(la274(n=72))) / la274(n=72) + C.

To learn more about integration click here

brainly.com/question/31744185

#SPJ11