Aqueous solutions of aluminum chloride and sodium carbonate are combined to form carbon dioxide and sodium chloride.
When chemicals are combined, a chemical change known as a balanced chemical reaction takes place. The reactants, or the chemicals that are combined, are on the left side of the equation. The reaction's byproducts are on the right side.
Aluminum oxide, sodium chloride, and carbon dioxide gas bubbles are created when aluminum chloride and sodium carbonate combine.
When dissolved substances react, one (or more) solid products are produced, which is known as a precipitation reaction. These kinds of reactions, which are also occasionally known as double displacement, double replacement, or metathesis reactions, frequently involve the exchange of ions between ionic compounds in aqueous solutions.
To know more about solution
https://brainly.com/question/30665317
#SPJ4
The complete question is
Write a balanced chemical equation: aqueous solutions of aluminium chloride and sodium carbonate are combined, producing aluminium carbonate.
calculate the mass fraction of CH3COOH in 3 litres of its 2M solution if the density of the solution is 0.981g/ml
The mass fraction is 0.122 for the sample that has been solved here for the solution of the CH3COOH in 3 liters of its 2M.
What is the mass fraction?The term "mass fraction" refers to the proportion of a component's mass of the substance that we have in the system and it is common that we expresses this value as a percentage accordingly.
Mass of the solution = DV
Mass = 0.981 * 3000 mL
= 2943 g
We know that;
Number of moles = CV
Moles = 2M * 3 L
= 6 moles
Mass = Number moles * molar mass
= 6 * 60 g/mol
= 360 g
Mass fraction = 360 g/2943 g
= 0.122
Learn more about mass fraction:https://brainly.com/question/29572900
#SPJ1
HELP PLEASE!!!!!!!!!!!
How can you prove that all products were formed when sodium bicarbonate solution and calcium chloride solution were combined?
Here are the products: calcium carbonate, sodium chloride, water, and carbon dioxide
One way to prove that all the products were formed when sodium bicarbonate solution and calcium chloride solution were combined is by carrying out some simple tests for the presence of each product.
Calcium Carbonate: Calcium carbonate is a white solid that is insoluble in water. To test for its presence, add a few drops of hydrochloric acid to the solution obtained from the reaction. If calcium carbonate is present, it will react with the acid to produce carbon dioxide gas, which can be seen as bubbles in the solution. Alternatively, you can filter the solution and wash the solid with water to remove any soluble salts. The solid residue left after drying is calcium carbonate.
Sodium Chloride: Sodium chloride is a soluble salt that dissolves completely in water. To test for its presence, simply evaporate the solution obtained from the reaction to dryness. If sodium chloride is present, it will remain as a white solid after evaporation.
Water: Water is a liquid that cannot be easily separated from the other products. However, you can test for its presence by using a drying agent such as anhydrous calcium chloride or silica gel. Simply add a small amount of the drying agent to the solution and stir for a few minutes. If the drying agent absorbs water, then water is present in the solution.
Cabon Dioxide:r Carbon dioxide is a gas that is released during the reaction. To test for its presence, you can bubble the gas through lime water (calcium hydroxide solution). If carbon dioxide is present, it will react with the lime water to form a white precipitate of calcium carbonate.
By carrying out these tests, you can prove that all the products have been formed and that no reactants are left in the solution.
learn more about sodium bicarbonate solution at :
https://brainly.com/question/29164163
#SPJ4
What is the mass of 7.28 mol of copper (II) nitrate?
Answer:
The molar mass of copper (II) nitrate is 187.5 g/mol.
Explanation:
For nitrous acid, HNO2, K, = 4. 0 x 10^-4. Calculate the pH of 0. 68 M HNO
The 0.68 M HNO₂ solution has a pH of 1.96. This demonstrates how acidic the solution is.
The equation for the dissociation of nitrous acid is as follows:
HNO₂ (aq) ⇌ H+ (aq) + NO₂- (aq)
The equilibrium constant expression for this reaction is:
K = [H+][NO₂-]/[HNO₂]
We are given the value of K and the initial concentration of HNO₂. We can assume that x is the concentration of H+ and NO₂- produced when the HNO₂ dissociates.
Using the equilibrium constant expression and the given values, we can write:
4.0 x [tex]10^{-4}[/tex] = x² / (0.68 - x)
Because x is small compared to 0.68, we can approximate (0.68 - x) as 0.68:
4.0 x [tex]10^{-4}[/tex] = x² / 0.68
Solving for x gives us:
x = √(4.0 x [tex]10^{-4}[/tex] x 0.68) = 0.011 M
The pH of the solution can be calculated using the formula:
pH = -log[H+]
Therefore, the pH of the 0.68 M HNO2 solution is:
pH = -log(0.011) = 1.96
Therefore, the pH of the 0.68 M HNO2 solution is 1.96. This indicates that the solution is acidic.
To learn more about pH refer to:
brainly.com/question/15289741
#SPJ4
1. If your [F-] molarity in an acid solution is 1 x 10-3, what's the pH?
The pH of an acidic solution depends on the concentration of hydrogen ions (H+) in the solution.
However, in this case, we are given the concentration of fluoride ions (F-) in the solution, which is not directly related to the pH.
Assuming that the acid in the solution is hydrofluoric acid (HF), we can write the following equilibrium expression:
[tex]HF + H2O H3O+ + F-[/tex]
where HF is the weak acid, H2O is water, H3O+ is the hydronium ion, and F- is the fluoride ion.
The equilibrium constant expression for this reaction is:
[tex]Ka = [H3O+][F-]/[HF][/tex]
At equilibrium, the concentration of HF will be equal to the initial concentration minus the concentration of F-, since one F- ion reacts with one H+ ion to form HF:
[HF] = [HF]initial - [F-]
Assuming that the initial concentration of HF is also 1 x 10^-3 M (since the problem does not give this information), we can substitute these values into the equilibrium expression and solve for the concentration of H3O+:
[tex]Ka = [H3O+][F-]/([HF]initial - [F-])1.8 x 10^-4 = [H3O+][1 x 0^-3]/(1 x 10^-3 - 1 x 10^-3)1.8 x 10^-4 = [H3O+][1 x 10^-3]/0[/tex]
Since the denominator is zero, this equation is undefined and cannot be solved. Therefore, we cannot determine the pH of the solution based on the given information.
learn more about molarity at:
https://brainly.com/question/8732513
#SPJ4
the masses of species involved are given in atomic mass units below each species, and 1 amu can create 932 mev of energy. what is the energy liberated due to transfomration of mass into energy during this reaction
Given that the masses of species involved are given in atomic mass units below each species, and 1 amu can create 932 meV of energy. Therefore, the energy liberated due to the transformation of mass into energy during this reaction is 1285.44 MeV.
The energy liberated due to the transformation of mass into energy during this reaction can be found by using the following formula: E = (Δm)c² Where E = Energy liberated during the transformation of mass into energy.
Δm = Change in mass during the transformation.
c = Speed of light in a vacuum (3.0 x 10⁸ m/s)
Given that, the masses of species involved are given in atomic mass units below each species, and 1 amu can create 932 meV of energy.
Therefore, first find the mass difference between the reactant and product as shown below: N + O → P + Q
Species Mass N 14 amu
O 16 amu
P 16 amu
Q 14 amu
Total 60 amu
Mass of reactants = 14 + 16 = 30 amu
Mass of products = 16 + 14 = 30 amu
Δm = (Mass of reactants - Mass of products)Δm = 30 - 30Δm = 0amu
Now, calculate the energy liberated as follows: E = (Δm)c²E = 0 x (3 x 10⁸)²E = 0 x 9 x 10¹⁶E = 0 MeV
Therefore, the energy liberated during the transformation of mass into energy is 0 MeV, which indicates that the reaction is not exothermic or endothermic.
To know about energy, refer here:
https://brainly.com/question/1932868#
#SPJ11
If the half-life of sodium-24 is 15 hours, how much remains from a 10.0 gram
sample after 60 hours? Round to the nearest hundredth place.
The half-life of sodium-24 is 15 hours, which means that after 15 hours, half of the original sample will decay, leaving half of the sample remaining. After another 15 hours (30 hours total), half of that remaining sample will decay, leaving a quarter of the original sample remaining. After another 15 hours (45 hours total), half of that remaining sample will decay, leaving an eighth of the original sample remaining. Finally, after another 15 hours (60 hours total), half of that remaining sample will decay, leaving a sixteenth of the original sample remaining.
To calculate the amount remaining after 60 hours, we can use the formula:
Amount remaining = (initial amount) x (1/2)^(t/h)
where "t" is the time elapsed and "h" is the half-life.
Plugging in the values we have, we get:
Amount remaining = (10.0 g) x (1/2)^(60/15)
= (10.0 g) x (1/2)^4
= (10.0 g) x 0.0625
= 0.625 g
Therefore, after 60 hours, approximately 0.63 g of the original 10.0 g sample of sodium-24 will remain. Rounded to the nearest hundredth place, this is 0.63 g.
Determine whether the combination of each pair of solutions can or cannot be tested in the precipitation interactive. Can be tested in the interactive Cannot be tested in the interactive Answer Bank Kl and K,SO K,SO, and K, CO, K. CO, and Ni(NO) Ni(NO,), and Ba(NO3)2 Pb(NO3), and K,s Ba(NO3)2 and K, CO,
[tex]Pb(NO_{3})_{2} ,And K_{2} S, Ba(NO_{3})_{2} and K_{2}CO_{3} ,K_{2}CO_{3} and Ni(NO_{3})_{2}[/tex]can be tested in the interactive, these can form precipitate (ppt), so it can be tested in interactive.
[tex]K_{2} SO_{4} and K_{2} CO_{3} , KI and K_{2} SO_{4}, NI(NO_{3} )_{2} and BO(NO_{3} )_{2}[/tex] cannot be tested in the interactive. There is no formation of precipitate (ppt), therefore it cannot be tested in interactive. When certain cations and anions interact in an aqueous solution, precipitates are insoluble ionic solid products of the process. The variables that affect how a precipitate forms can be different. Certain reactions, like those involving buffer solutions, are temperature-dependent, whereas others just depend on the concentration of the solution.The following is an illustration of a precipitation reaction: One of the products is solid, and both reactants are watery. The reactants dissociate and are soluble since they are ionic and watery.
Learn more about precipitate here:
https://brainly.com/question/1783904
#SPJ4
What is the claim in a literary analysis?
a reason that makes your opinion believable
an emotional statement of opinion
a reasonable, debatable opinion about the work
a summary of the factual evidence
An argumentative, plausible view of the literary work being evaluated is the claim in a literary analysis.
The claim in a literary analysis, which is an interpretation of a literary work, is the author's argument or viewpoint regarding the relevance or meaning of the work.
The assertion needs to be clear, debatable and backed up by textual evidence.
Literary analysisThe claim in literary analysis is the main viewpoint or argument that the author is advancing regarding the relevance or meaning of the literary work under consideration.
The assertion should be a reasonable, disputed opinion that can be backed up by textual evidence, and it should be sufficiently detailed to be convincing and understandable to the reader.
For instance, in an interpretation of William Shakespeare's play "Hamlet," a writer can contend that, rather than a lack of courage, Hamlet's hesitation to exact revenge on his father's murderer stems from his desire for justice and his battle with indecision.
This assertion is both plausible and problematic because different readers or critics may interpret Hamlet's actions differently.
learn more about the literary analysis here
https://brainly.com/question/9965425
#SPJ1
Acetylene is formed as a by-product in the manufacture of ethylene. It is removed by selective hydrogenation using noble metal catalysts (see, for example, us 7,453,017). A particular catalyst achieves 90% acetylene saturation with 50% hydrogen selectivity for acetylene at a weight hourly space velocity of 800 h1 based on ethylene. Design a reactor to remove 1% acetylene from ethylene in a plant that produces 1. 5 million metric tons per year of ethylene using this catalyst
The reactor needs to process 2,488,076 m³/hour of ethylene to remove 0.8219 metric tons/day of acetylene. The reactor design will depend on the specifics of the plant, such as the available space, pressure and temperature requirements, and the desired efficiency of the process.
To remove 1% acetylene from 1.5 million metric tons per year of ethylene, we need to calculate the flow rate of ethylene and acetylene. Let's assume that the ethylene stream contains 2% acetylene, so we need to remove 1% of 2%, which is 0.02%.
1.5 million metric tons per year of ethylene is equivalent to 4,109.59 metric tons per day. To calculate the flow rate of acetylene, we multiply the flow rate of ethylene by the concentration of acetylene:
Acetylene flow rate = 4,109.59 metric tons/day x 0.02% = 0.8219 metric tons/day
Now we can use the given information about the catalyst to design a reactor. The weight hourly space velocity (WHSV) is defined as the weight of reactants per hour per weight of catalyst. We can use the following equation to calculate the required weight of catalyst:
WHSV = (Weight of reactants per hour) / (Weight of catalyst)
Weight of catalyst = (Weight of reactants per hour) / WHSV
Since we know the WHSV and the acetylene flow rate, we can calculate the required weight of ethylene per hour:
Weight of ethylene per hour = (Weight of acetylene per hour) / (0.9 × 0.5 × WHSV)
Weight of ethylene per hour [tex]=\frac{(0.8219)}{(0.9*0.5*800*24)} = 1,368.94[/tex] metric tons/hour
Assuming a density of 0.55 kg/L for ethylene, the volumetric flow rate of ethylene is:
Volumetric flow rate of ethylene = Weight of ethylene per hour / (Density of ethylene x 1000 L/m³)
Volumetric flow rate of ethylene [tex]= \frac{(1,368.94)}{(0.55 * 1000)} = 2,488,076[/tex] m³/hour
This indicates that in order to remove 0.8219 metric tons of acetylene per day, the reactor must process 2,488,076 m³/hour of ethylene each hour. The reactor design will be determined by the characteristics of the facility, including the amount of space available, the necessary pressure and temperature, and the desired process efficiency. Based on these variables, the catalyst weight and reactor size will need to be determined.
To know more about Volumetric flow rate
brainly.com/question/12910339
#SPJ4
the complete question is:
Acetylene is formed as a by-product in the manufacture of ethylene. It is removed by selective hydrogenation using noble metal catalysts (see for example US 7453 017). A particular catalyst achieves 90% acetylene saturation with 50% hydrogen selectivity for acetylene at a weight hourly space velocity of 800 h-1 based on ethylene Design a reactor to remove 1% acetylene from ethylene in a plant that produces 15 million metric tons per year of ethylene using this catalyst.
Calculate the mass of dinitrogen tetroxide that contains a million oxygen atoms
The mass of the Dinitrogen tetroxide that contains a million oxygen atoms is 23 x 10⁶ .
Atoms and molecules are very small in both size and mass. One sample mole's weight is the molar mass. To get the molar mass, connect the atomic masses (atomic weights) of each atom in the molecule. Using the mass listed in the Periodic Table or Atomic Weight Table, determine the atomic mass for each element.
To calculate the molecular mass of a molecule, multiply the subscript (number of atoms) by the atomic mass of each element in the molecule and add those masses together. Typically, molar mass is stated in either grammes (g) or kilogrammes (kg) (kg).
From the molecular formula of dinitrogen tetroxide ;
molar mass of dinitrogen tetroxide = 92 g/mol
hence;
92 g of dinitrogen tetroxide contains 4 atoms of oxygen
x g of dinitrogen tetroxide will contain 1 x 10⁶ atoms of oxygen
x = 92 x 1 x 10⁶/4
x =23 x 10⁶ atoms of oxygen.
Learn more about Mass:
https://brainly.com/question/28395798
#SPJ4
Complete question:
Calculate the mass of dinitrogen tetroxide (N₂O₄) that contains a million (1.000 x 10₆) oxygen atoms. Be sure your answer has a unit symbol if necessary, and round it to 4 significant digits.
What is the pH at the equivalence point in the titration of a 15. 4 mL sample of a 0. 344 M aqueous hypochlorous acid solution with a 0. 412 M aqueous sodium hydroxide solution
Therefore, the pH at the equivalence point in the titration of a 15.4 mL sample of a 0.344 M aqueous hypochlorous acid solution with a 0.412 M aqueous sodium hydroxide solution is 7.542.
The pH at the equivalence point in the titration of a 15.4 mL sample of a 0.344 M aqueous hypochlorous acid solution with a 0.412 M aqueous sodium hydroxide solution can be calculated using the following steps:
1. First, determine the number of moles of hypochlorous acid (HOCl) in the 15.4 mL sample:
[tex]0.344 M * 0.0154 L = 0.00530[/tex] moles of HOCl
2. Next, determine the number of moles of sodium hydroxide (NaOH) needed to reach the equivalence point:
0.00530 moles of HOCl * (1 mole of NaOH / 1 mole of HOCl) = 0.00530 moles of NaOH
3. Calculate the volume of the 0.412 M NaOH solution needed to reach the equivalence point:
0.00530 moles of NaOH / 0.412 M = 0.0129 L or 12.9 mL
4. At the equivalence point, the moles of HOCl and NaOH are equal, and the resulting solution contains only water and the salt sodium hypochlorite (NaOCl). The pH of the solution will depend on the dissociation of the salt:
NaOCl → Na+ + OCl-
5. The hypochlorite ion (OCl-) can undergo hydrolysis to form hypochlorous acid and hydroxide ions:
OCl- + H2O → HOCl + OH-
6. The presence of the hydroxide ions will increase the pH of the solution. To calculate the pH, we can use the Kb value for the hypochlorite ion, which is [tex]2.9 x 10^{-7}[/tex]:
[tex]Kb = [HOCl][OH-] / [OCl-][/tex]
7. Assuming that the initial concentration of OCl- is equal to the concentration of NaOH at the equivalence point (0.412 M), we can rearrange the Kb equation and solve for the concentration of OH-:
[tex][OH-] = Kb * [OCl-] / [HOCl]\\\\ [OH-] = (2.9 * 10^{-7} ) * (0.412) / (0.344)\\\\ [OH-] = 3.48 * 10^{-7} 10^-7 M[/tex]
8. Finally, we can use the concentration of OH- to calculate the pH of the solution:
[tex]pOH = -log[OH-] = -log(3.48*10^{-7} ) = 6.458[/tex]
[tex]pH = 14 - pOH = 14 - 6.458 = 7.542[/tex]
For more question on pH click on
https://brainly.com/question/172153
#SPJ4
Litium nitride reacts with water to form ammonia and lithium hydroxide, according to the following balanced chemical equation:
Li3N (s) + 3 H2O (l) → NH3 (g) + 3 LiOH (aq)
If 4. 87 g of lithium reacts with 5. 80 g of water, how much ammonia is produced before the reaction stops?
1.82 g of ammonia are created before the reaction comes to an end. By computing the moles of each reactant and comparing their ratios using the balanced chemical equation, we may do this.
We determine the lithium's moles:
1 mol Li divided by 6.941 g Li to get 4.87 g Li equals 0.700 mol Li
The moles of water are then determined:
1 mol H2O divided by 18.015 g H2O in 5.80 g gives 0.322 mol H2O.
As there are fewer molecules of water (0.322 mol) than there are molecules of lithium (0.700 mol), water is the limiting reactant.
We may determine the number of moles of ammonia created by using the mole ratio from the balanced chemical equation:
1 mol NH3 / 3 mol H2O 0.322 mol H2O = 0.107 mol NH3
Finally, we may convert moles to grammes using the molar mass of NH3:
1.82 g NH3 from 0.107 mol NH3 (17.031 g NH3 / 1 mol NH3)
As a result, 1.82 g of ammonia are created before the reaction comes to an end.
Learn more about "balanced chemical equation." here:
https://brainly.com/question/23024590
#SPJ4
nick has been the head footbal coach at a prminent university for many years. he has always led his team to success. another university believes that it must be nicks leadership that has led his team to victory so many times. they offer nick a position leading their own football team, but it ends up being the worst season the team has ever had. university officals realize that nicks leadership mustve worked for his former team and didnt translate to theirs. this situation could be used as an example of what kind of leadership theory?
a. great man theory
b. behavioral theory
c. contingency theory
c. transactional theory
Answer:
a
Explanation:
citric acid is a triprotic weak acid. if 11.9 ml of 0.150 m naoh is required to reach the first equivalence point of a solution of citric acid how many ml of naoh are required to completely neutralize this solution?
35.7 ml of 0.150 M NaOH will be needed to completely neutralize the citric acid solution.
Citric acid is a triprotic weak acid, and 11.9 ml of 0.150 M NaOH is required to reach the first equivalence point of a solution of citric acid.
Citric acid, being a weak acid, is not completely ionized in solution. As a result, it will require more than 1 equivalent of base to neutralize it completely. So, it is necessary to calculate the number of equivalents present in the solution to answer the question. Let's first write the balanced chemical equation between citric acid (H3C6H5O7) and NaOH as follows:
H3C6H5O7 + NaOH → Na3C6H5O7 + H2O
For each mole of citric acid, three moles of NaOH are required to neutralize it completely. Since the citric acid solution is 0.150 M, there will be 0.150 moles of citric acid per liter of solution (Molarity = moles/liter).
Thus, the number of moles of citric acid present in 11.9 ml of solution can be calculated as follows: 0.150 moles of citric acid / 1000 ml of solution = X moles of citric acid / 11.9 ml of solution X = 0.001785 moles of citric acid Therefore, 3 times the number of moles of citric acid will be the number of moles of NaOH required to neutralize the citric acid completely. Therefore, the number of moles of NaOH required to neutralize the citric acid completely is as follows: 3 X 0.001785 moles of citric acid = 0.005355 moles of NaOH.
The volume of 0.150 M NaOH needed to contain 0.005355 moles of NaOH can be calculated as follows:
Molarity = moles/volume
Volume = moles / Molarity = 0.005355 moles / 0.150 M = 0.0357 L or 35.7 ml.
Therefore, 35.7 ml of 0.150 M NaOH will be needed to completely neutralize the citric acid solution.
Learn more about weak acid on:
https://brainly.com/question/24018697
#SPJ11
A chemist is preparing to carry out a reaction at high pressure that requires 36.0 moles of hydrogen gas. The chemist pumps the hydrogen into a 12.4 L rigid steel container at 25.0oC. To what pressure, in atm, must the hydrogen be compressed? a. What gas law applies to this scenario? b. Solve for the unknown variable (include the units in your answer).
The gas law that applies to this scenario is the Ideal Gas Law, which states:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin.
Rearranging the Ideal Gas Law to solve for pressure (P), we get:
P = nRT/V
Substituting the given values, we get:
P = (36.0 mol)(0.0821 L•atm/K•mol)(25.0 + 273 K) / 12.4 L
P = 98.9 atm
Therefore, the hydrogen gas must be compressed to a pressure of 98.9 atm.
More on gas laws can be found here: https://brainly.com/question/12669509
#SPJ1
Macmillan Learning
Step 2: Show the conversions required to solve this problem and calculate the grams of Br₂.
70.6 g AlBr, x
grams of Br₂:
26.98 g Al
159.80 g Br₂
266.68 g AlBr,
Answer Bank
I mole Al
1 mole Br₂
1 mole AlBr,
2 moles Al
3 moles Br₂
2 moles AlBr,
= g Br₂
g Br₂
Answer:
To solve the problem, we need to convert the given quantity of AlBr to grams of Br₂ using the given molar ratios:
70.6 g AlBr * (1 mole AlBr / 266.68 g AlBr) * (3 moles Br₂ / 2 moles AlBr) * (159.80 g Br₂ / 1 mole Br₂) = 94.3 g Br₂
Therefore, 94.3 g of Br₂ are required.
element which are placed is group VIIIA don't take part in chemical reaction why
Answer:
Elements placed in Group VIIIA of the periodic table are also known as the noble gases, and they are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn).
These elements do not take part in chemical reactions because they have a full outermost electron shell, also known as the valence shell. This means that their valence shell contains the maximum number of electrons that it can hold, and therefore, these elements do not have any electron available for bonding with other atoms.
In other words, their outermost electron shell is already stable, which means they have very low reactivity with other elements. Because of their unreactive nature, noble gases are often referred to as inert gases.
A 2. 37 l balloon contains 0. 115 mil of xenon gas,Xe (g) at a pressure of 954 Torr
The temperature of the xenon gas in the balloon is approximately 276 K.
We can use the Ideal Gas Law to solve for the moles of xenon gas present in the balloon:
PV = nRT
where P is pressure, V is volume, n is number of moles, R is gas constant, and T will be the temperature in Kelvin.
Converting the given values to the correct units:
P = 954 Torr = 954/760 atm
= 1.2553 atm
V = 2.37 L
n = 0.115 mol (given)
R = 0.08206 L·atm/mol·K (gas constant)
T = ? (unknown)
Substituting the values and solving for T:
T = PV/nR = (1.2553 atm)(2.37 L)/(0.115 mol)(0.08206 L·atm/mol·K)
≈ 276 K
To know more about Ideal Gas Law here
https://brainly.com/question/4147359
#SPJ4
The volume of gas at 320mmHg and 22⁰c is 220cm³. What volume would the gas occupy at s.t.p ?
Answer: 85.73 cm^3
Explanation:
Combined Gas law (temperature must be in Kelvin)
V2= P1V1 T2/(T1 x P2)
P1 = 320 mmHg
V1= 220 cm^3
T1= 295.15 K
T2= 273.15 K
P2 = 760 mmHg
320 x 220 X 273.15/(295.15 X 760) = 85.72697201 cm^3
Barium sulfide decomposes into its elements when heat and electricity areapplied.Which reaction shows the balanced equation for the decomposition?A. 8BaS→ 8Ba + SgB. Ba₂S → 2Ba + SC. BaS2 -> Ba + S₂D. 2Ba₂S -> 4Ba + 2S
The correct answer is option B. Ba₂S → 2Ba + S. This is the balanced equation for the decomposition reaction of barium sulfide into its elements.
In a decomposition reaction, a compound breaks down into simpler substances, often its elements. The balanced equation for a decomposition reaction shows the same number of atoms of each element on both sides of the equation.
In option A, there are 8 atoms of barium and 8 atoms of sulfur on the left side of the equation, but only 8 atoms of barium and 1 atom of sulfur on the right side. In option C, there are 1 atom of barium and 2 atoms of sulfur on the left side, but only 1 atom of barium and 2 atoms of sulfur on the right side. In option D, there are 4 atoms of barium and 2 atoms of sulfur on the left side, but 4 atoms of barium and 2 atoms of sulfur on the right side. Only option B has the same number of atoms of each element on both sides of the equation, making it the correct answer.
To learn more about Decomposition reaction :
https://brainly.com/question/14608831
#SPJ11
Look at the image below and answer the following questions:
What kind of circuit has been built?
What will happen if one of the light bulbs is burnt out and no longer lights up?
Answer: series circuit
Explanation:
when one bulb burns out the other bulb will go off because the circuit breaks
the oxygen that is released during the light reactions comes from what? group of answer choices ndph h2o atp h
The oxygen that is released during the light reactions comes from water.
Let's know more about photosynthesis:
1. Photosynthesis is the process by which the plant can produce food. The process of photosynthesis converts light energy into chemical energy, which organisms can use. In this process, water and carbon dioxide produce oxygen and glucose. This process is carried out in the chloroplasts of plants.
2. Light Reaction: During the process of photosynthesis, two types of reactions take place, light reaction, and dark reaction. The light reaction takes place in the thylakoid membrane of the chloroplast. It needs light to occur. Here, the light energy is absorbed by pigments such as chlorophyll. This light energy is converted into chemical energy. ATP and NADPH are the two products of the light reaction.
3. Oxygen is also released during the light reaction. The oxygen that is released during the light reactions comes from water. This reaction also helps in the formation of the electron transport chain.
#SPJ11
Know more about light reactions: What is a light reaction? https://brainly.com/question/23940213
If 100. 0 g of Cl2 are needed, what mass of NaOCl must be reacted? NaOCl + HCl → NaOH + Cl2
105.00g mass of NaOCl to react with HCl and produce 100.0 g of Cl₂.
The balanced chemical equation for the reaction between NaOCl and HCl is:
NaOCl + HCl → NaOH + Cl₂
From the equation, we can see that 1 mole of NaOCl reacts with 1 mole of Cl₂. Therefore, we need to determine the number of moles of Cl₂ that are required, and then use the stoichiometry of the balanced equation to calculate the corresponding number of moles of NaOCl required.
The molar mass of Cl₂ is 2 x 35.45 g/mol
= 70.90 g/mol.
We can use this molar mass to calculate the number of moles of Cl₂ required:
100.0 g / 70.90 g/mol
= 1.41 mol
Therefore, 1.41 mol of NaOCl is required to react with 1.41 mol of HCl to produce 1.41 mol of Cl₂. The molar mass of NaOCl is 74.44 g/mol, so we can calculate the mass of NaOCl required as:
1.41 mol x 74.44 g/mol
= 105.00 g
To know more about mass here
https://brainly.com/question/13682401
#SPJ4
How many Magnesium atoms in the formula 3Mg(O3H2)3
HELPP M PLEASE
The formula 3Mg(O3H2)3 represents a molecule composed of 3 magnesium atoms and 9 groups of hydroxide ions (O3H2), each containing 3 oxygen atoms and 6 hydrogen atoms.
What is a Molecule?
A molecule is a colle-ction of two or more than two atoms that are held toge-ther by chemical-bonds. These atoms could be of the same or different elements. For example, H2O (water) is a molecule made up of two (2) hydrogen-atoms and one oxygen atom.
Another example is carbon dioxide (CO2), which is a molecule consisting of one carbon atom and two oxygen atoms. Molecules are the fundamental building blocks of many substances, and their unique arrangement and properties play a critical role in various chemical reactions and biological processes.
To learn more about molecule, visit: https://brainly.com/question/475709
#SPJ1
Tick the correct answer. power is needed to act. ( )
plants get power from the sun.( ) firewood is not a source of power.( )
According to this statement, Power is required to act. (correct) Plants get strength from the sun. (correct) Firewood isn't a source of power. (incorrect).
What is firewood and its uses?Firewood is characterized by the Food and Agricultural Organization of the United Nations, or FAO, as "wood in the rough (from trunks and branches of trees) to be used as fuel for uses such as heating, cooking, or power production."
What is the benefit of firewood?Burning firewood lowers the need over electric heating in your house. If the electricity goes out, you can still heat your house.Wintertime is a crucial time to remember this. Storms can knock out the power for days, putting people's homes, plumbing, and health at danger.
To know more about firewood visit :
https://brainly.com/question/30519575
#SPJ1
list the processes that release carbon into the atmosphere
Answer:
Fossil fuels, such as coal, oil, or natural gas, release carbon back into the atmosphere.
The processes would be decomposition, diffusion, erosion, respiration, and combustion.
Explanation:
Hope this helped?
Many alloys, such as brass (made from zinc and copper) is a solid
…………..in which the atoms of two or more metals are uniformly mixed.
*solution
*suspension
*colloid
*pure substance
Answer:
solution
Explanation:
Alloy is solid solution as it is a mixture of two or more metals or a metal and a non-metal.
the enthalpy of formation of caesium chloride is Cs(s)------->Cs(g) ΔH⁰= –44.28 kj mol-¹
the enthalpy of sublimation of caesium is Cs(s) ------>Cs(g) ΔH⁰=+77.6 kj mol-¹
The enthalpy of the formation of cesium chloride is -68.4 kJ/mol.
What is the enthalpy of formation of cesium chloride?The enthalpy of formation of caesium chloride (CsCl) can be calculated using the following equation:
ΔHf⁰(CsCl) = ΔHf⁰(Cs) + ΔHf⁰(Cl) - ΔHf⁰(CsCl)
We are given the enthalpy of sublimation of caesium, which tells us the energy required to convert solid caesium into gaseous caesium:
ΔHsub⁰(Cs) = +77.6 kJ/mol
Since the enthalpy of formation of an element in its standard state is zero, we can assume that:
ΔHf⁰(Cs) = 0
The enthalpy of formation of chlorine gas (Cl₂) is -95.7 kJ/mol. The enthalpy change for the reaction that forms CsCl can be written as:
Cs(s) + 1/2 Cl₂(g) → CsCl(s)
The enthalpy change for this reaction is equal to the enthalpy of formation of CsCl:
ΔHf⁰(CsCl) = ΔHf⁰(Cs) + 1/2 ΔHf⁰(Cl₂) - ΔHrxn
where ΔHrxn is the enthalpy change for the reaction. We can use Hess's Law to calculate ΔHrxn by considering the following two steps:
Cs(s) → Cs(g) ΔHsub⁰(Cs) = +77.6 kJ/mol (endothermic)
1/2 Cl₂(g) → Cl(g) ΔHdiss⁰(Cl) = +121 kJ/mol (endothermic)
Adding these two reactions gives:
Cs(s) + 1/2 Cl₂(g) → Cs(g) + Cl(g) ΔHrxn = ΔHsub⁰(Cs) + 1/2 ΔHdiss⁰(Cl)
Substituting the values we have for ΔHsub⁰(Cs) and ΔHdiss⁰(Cl) gives:
ΔHrxn = +77.6 kJ/mol + 1/2(+121 kJ/mol) = +138.3 kJ/mol
Substituting all the values into the equation for ΔHf⁰(CsCl) gives:
ΔHf⁰(CsCl) = 0 + 1/2(-95.7 kJ/mol) - (-138.3 kJ/mol)
ΔHf⁰(CsCl) = -68.4 kJ/mol
Learn more about enthalpy of formation at: https://brainly.com/question/30431725
#SPJ1
PLEASE HELP!! The graph below shows the motion of a car leaving the airport with segments A, B, and C labeled on their journey.
Identify the line segment that would represent a negative acceleration. Explain your answer.
Answer: Segment B
Explanation:
On a graph, a line traveling upwards from left to right is considered positive. A line traveling downwards from left to right is considered negative. A line neither traveling upwards or downwards is neutral. Based on this, we can see that segment B is traveling downwards, so it would represent a negative acceleration.