Given data
*The given initial speed is u = 0 m/s
*The given distance is s = 20 m
*The value of the acceleration due to gravity is g = 9.01 m/s^2
The formula for the final speed of the ball at a distance of 20 m is given by the kinematic equation of motion as
[tex]v^2=u^2+2gs[/tex]Substitute the known values in the above expression as
[tex]\begin{gathered} v^2=(0)^2+2(9.01)(20) \\ v^2=\text{36}0.04 \\ v=18.98\text{ m/s} \end{gathered}[/tex]Hence, the speed of the ball at a distance of 20 m is v = 18.98 m/s
A puck is moving on an air hockey table. Relative to an x,y coordinate system at time t =0s, the x
components of the puck's initial velocity and acceleration are Vix=1.0 m/s and ax=2.0 m/s². The y
components of the puck's initial velocity and acceleration are Viy=2.0 m/s and ay=2.0 m/s². Find the
magnitude and direction of the puck's velocity at a time of t=0.50 s. Specify the direction relative to
the x axis. HELPP!!!
The supplied puck is moving at a speed of v0x=+3.4m/s on an air hockey table at time t=0.
What is the meaning of velocity?The direction of the movement of the body or the object is defined by its velocity. Most of the time, speed is a scalar quantity. In its purest form, velocity is a vector quantity. It measures how quickly a distance changes. It is the rate at which displacement is changing.
What does the term "tangential velocity" refer to?Any object traveling in a circular motion has a linear speed known as tangential velocity. On a turntable, a point in the center moves less distance in a full rotation than a point near the outside edge.
To know about tangential velocity visit:
https://brainly.com/question/28738284
#SPJ13
A person takes a trip, driving with a constant speed of 93.5 km/h, except for a 22.0-min rest stop. If the person's average speed is 71.6 km/h, find the following.(a) How much time is spent on the trip? h(b) How far does the person travel? km
We will have the following:
First, we determine the time:
[tex]\begin{gathered} \frac{93.5km/h+0km/h}{H}=71.6km/h\Rightarrow H=\frac{935}{716}h \\ \\ \Rightarrow H\approx1.3h \end{gathered}[/tex]So, the time spent on the trip was 935/716 h; that is approximately 1.3 hours.
Now, we deteremine the distance traveled:
[tex]\begin{gathered} d=(93.5km/h)(\frac{935}{716}-\frac{11}{30}h)\Rightarrow d=87.81513035...km \\ \\ \Rightarrow d\approx87.82km \end{gathered}[/tex]So, the distane traveled was approximately 87.82 km.
Starting from rest, billy goes down a slide (height of 2.5m above ground) and billy’s mass is 35kg. There is friction acting on billy, when he reaches the ground his speed is 3.5 m/s. How much mechanical energy was lost due to friction (give answer in joules)
In order to determune the amount of mechanicak energy lost, consider that the potential energy at the starting point must be equal to the sum of the energy lost due to the friction, plus the kinetic energy on the ground.
Then, you can write:
[tex]U=E_r+K[/tex]the amount of energy lost is energy associated to the friction.
Solve the previou equation for Er, replace the expressions for U and K, and replace the values of the given parameters, as follow:
[tex]\begin{gathered} E_r=U-K=(35kg)(9.8\frac{m}{s^2})(2.5m)-\frac{1}{2}(35kg)(3.5\frac{m}{s})^2 \\ E_r=643.12J \end{gathered}[/tex]Hence, the amoun of the energy lost was approximately 643.12J
What is the voltage drop across point A and B?
We are asked to find the voltage drop at point A and B
Notice that point A and B have 3 resistors connected in parallel so the voltage across these 3 resistors will be the same.
First, we have to find the equivalent resistance of these 3 parallel resistors.
[tex]\begin{gathered} R_{AB}=\frac{1}{\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}} \\ R_{AB}=\frac{1}{\frac{1}{120}+\frac{1}{60}+\frac{1}{30}} \\ R_{AB}=17.14\; \Omega \end{gathered}[/tex]So, the resistance of the parallel resistors is 17.14
Now, we can simply use the voltage drop formula to find the voltage drop at point A and B
[tex]\begin{gathered} V_{AB}=\frac{R_{AB}}{R_{total}}\times V_{\text{in}} \\ V_{AB}=\frac{R_{AB}}{R_{AB}+R_{CD}}\times V_{\text{in}} \end{gathered}[/tex]Where Vin is the input voltage that is 100 V
[tex]\begin{gathered} V_{AB}=\frac{17.14}{17.14+100}\times100 \\ V_{AB}=14.63\; V \end{gathered}[/tex]Therefore, there is a 14.63 V drop at point A and B
10. A boy of mass 55kg runs at 12m/s and hops on a 15kg skateboard that was at rest. What is thevelocity of the boy on the skateboard afterwards?
M = mass of the boy = 55kg
V = initial velocity of the boy = 12 m/s
m= mass of stationary skateboard = 15kg
v= velocity os stationary sketeboard= 0 m/s
V' = velocity of the boy on the skateboard after collision
Conservation of momentum:
MV + mv = (M + m) V'
Replacing:
55 kg * 12 m/s + 15 kg *0 = (55 kg+ 15 ) V'
Solve for V´'
660 = 70 V´'
660/70 = V'
V'= 9.42 m/s
The total mechanical energy of the roller coaster cart below at Point A is 180,000 J. The speed of the cart at Point B is +20 m/s. Assume no energy is lost due to dissipative forces such as friction. A) What is the mass (in kg) of the roller coaster cart? B) What is the potential energy at Point A? C) What is the kinetic energy at Point A?
Mechanical energy (ME) = Potential energy(PE) + kinetic energy (KE)
PE = mgh
m= mass
g= gravity
h= height
KE= 1/2 m v^2
v= speed
Point B
ME = KE + PE
PE = 0 (height = 0 )
KE = 1/2 (m) v^2
180,000 = 1/2 (m) (20)^2
m = 180,000 / (1/2 (20)^2 )
m= 900 kg
Point A.
ME = 180,000 J = PEa + KE a
PEa = m g h = 900 (9.8) (20) = 176,400J
MEa = PEa + KEa
KEa = MEa - PEa = 180,000 - 176,400 J = 3,600 J
A) mass = 900 kg
B) 176,400 J
C) 3,600 J
Mr.D soars over a large group of zombies and is in the air for a total of 5s. How high did he go?
what happens to the state of a variable if it goes through a two series connected NOT gate.
Which of the following statements about air is TRUE?
A. Air is not a source of resistance.
B. Air has mass, but not inertia.
C. Air is not affected by human movement.
D. None of these statements are true.
The true statement among the following is that the air is not affected by human movement. Hence, option C is correct.
What is Air?Air relates to the atmosphere of the planet. Several gases and minute dust particles make up the air. Living organisms breathe and thrive in this pure gas. Its shape and volume are ill-defined. Considering that it is matter, it has mass and weight. Atmospheric pressure is generated by air weight. The space vacuum lacks air.
About 78% of the gas within air is nitrogen, 21% of the gas is oxygen, 0.9% of the gas is argon, 0.04% of the gas is co2, and very little other gas is present.
A typical amount of water vapor is around 1%.
Since respiration requires oxygen, animals must breathe it to survive. The lungs transfer back carbon dioxide back into the atmosphere when breathing, putting oxygen into the body.
To know more about Air:
https://brainly.com/question/19368011
#SPJ12
A ball is equipped with a speedometer and launched straight upward. The speedometer reading two seconds after launch is shown at the right; the ball is moving upward. At what approximate times would the ball display the following speedometer readings?
The time read by the speedometer is, t = 4 s.
The time displayed by the speedometer for a speed of 10 m/s is one second.The time displayed by the speedometer for a speed of 20 m/s is one second.The time displayed by the speedometer for a speed of 30 m/s is one second.What is Gravitational acceleration?The strength of a gravitational field is denoted by gravitational acceleration (symbolized g). It is measured in meters per second (meters per second squared). At the earth's surface, 1 g equals 9.8 m/s2.
Therefore,
The time read by the speedometer is, t = 4 s.
Because the speedometer has a low precision, value approximation is possible.
For the speedometer showing the speed 20 m/s. The time is calculated as,
v = u + gt1
Here, u is the initial speed and g is the gravitational acceleration and its approximate value is, g ≈ 10 m/s²
Solving as,
10 = 0 + 10 t1
t1 = 1s
Thus, the time shown by the speedometer corresponding to speed of 10 m/s is 1 s.
For the speedometer showing the speed 20 m/s. The time is calculated as,
v = u + gt2
Solving as,
20 = 10 + 10 t2
t2 = 1s
Thus, the time shown by the speedometer corresponding to speed of 20 m/s is 1 s.
For the speedometer showing the speed 30 m/s. The time is calculated as,
v = u + gt3
Solving as,
30 = 20 + 10 t3
t3 = 1s
Thus, the time shown by the speedometer corresponding to speed of 30 m/s is 1 s.
To learn more about Gravitational acceleration, refer to:
https://brainly.com/question/88039
#SPJ13
Yea thanks thank you for the info thanks
To help us solve this problem let's plot the points given in the table:
From the graph we notice that this the position can be modeled by a sine function, we also notice that the period of this function is 8. We know that a sine function can be modeled by:
[tex]A\sin(B(x+C))+D[/tex]where A is the amplitude, C is the horizontal shift, D is the vertical shift and
[tex]\frac{2\pi}{B}[/tex]is the period.
From the graph we have we notice that we don't have any horizontal or vertical shift, then C=0 and D=0. We also notice that the amplitude is 15, then A=15. Finally, as we said, the period is 8, then:
[tex]\begin{gathered} 8=\frac{2\pi}{B} \\ B=\frac{2\pi}{8} \\ B=\frac{\pi}{4} \end{gathered}[/tex]Plugging these values in the sine function we have:
[tex]x(t)=15\sin(\frac{\pi}{4}t)[/tex]If we graph this function along the points on the table we get the following graph:
We notice that we don't get an exact fit but we get a close one.
Now, that we have a function that describes the position we can find the velocity by taking the derivative:
[tex]\begin{gathered} x^{\prime}(t)=\frac{d}{dt}\lbrack15\sin(\frac{\pi}{4}t)\rbrack \\ =\frac{15\pi}{4}\cos(\frac{\pi}{4}t) \end{gathered}[/tex]Therefore, the velocity is:
[tex]x^{\prime}(t)=\frac{15\pi}{4}\cos(\frac{\pi}{4}t)[/tex]Once we have the expression for the velocity we can find values for the times we need, they are shown in the table below:
From the table we have that:
[tex]x^{\prime}(0.5)=10.884199\text{ cm/s}[/tex]And that:
• The earliest time when the velocity is zero is 2 s.
,• The second time when the velocity is zero is 6 s.
,• The minimum velocity happens at 4 s.
,• The minimum velocity is -11.780972 cm/s
The ammeter in the figure below reads 1.0A. Calculate the magnitude of the currents I1 and I2.
Given:
• Ammeter reading, I = 1.0 A
,• R1 = 2.0 Ω
,• R2 = 4.0 Ω
,• R3 = 5.0 Ω
Let's find the magnitude of the currents in I1 and I2.
Apply Kirchhoff's Current Law.
We have:
[tex]I_1+I_2+I_3=0[/tex]From Kirchoff's junction rule:
[tex]I_1-I_2-I_3=1A[/tex]Thus, we have:
[tex]\begin{gathered} \frac{1}{R_{eq}}=\frac{1}{2}+\frac{1}{4}+\frac{1}{5} \\ \\ \frac{1}{R_{eq}}=\frac{10+5+4}{20}=\frac{19}{20} \\ \\ R_{eq}=\frac{20}{19}=1.1\text{ ohms} \end{gathered}[/tex]Apply Ohm's law to find the voltage in the circuit:
[tex]\begin{gathered} V=IR \\ \\ V=1.0*1.1 \\ \\ V=1.1\text{ V} \end{gathered}[/tex]To find I1, apply Kirchoff's loop law:
[tex][/tex]I need help with the following question:
USING THE FOLLOWING CONVERSION FACTOR:
Conversions Longitude:
1 degree= 52.505 miles
1 minute= 4620.5 feet
Conversions for Latitude:
1 degree= 69.005 miles
1 minute= 6072.5 feet
How Do I convert these coordinates into feet?
The length of side A (40° 51.485' N, 74° 12.080' W & 40° 51.485' N, 74° 11.883' W) = ------------- ft
The length of side B (40° 51.485' N, 74° 12.080' W & 40° 51.800' N, 74° 11.883' W) = ----------- ft
The length of the side A is 1,13,25,866.44 ft N, 2,70,34,989.4 ft W
The length of the side B is 1,13,25,866.44 ft N, 2,70,34,989.4 ft W
Length is the measurement of anything from end to end.
Conversions Longitude:
Longitude is the angular distance of a location east or west of the meridian in Greenwich, England, or west of the standard meridian of a celestial object.
1 degree= 52.505 miles
1 minute= 4620.5 feet
Conversions for Latitude:
Latitude is the angular distance of a location north or south of the Earth's equator.
1 degree= 69.005 miles
1 minute= 6072.5 feet
Also 1 mile = 5280 feet
The length of side A (40° 51.485' N, 74° 12.080' W)
40° 51.485' N = 40 * 52.505 * 5280 + 51.485 * 4620.5
40° 51.485' N = 1,10,88,000 + 2,37,866.44
40° 51.485' N = 1,13,25,866.44 feet.
74° 12.080' W = 74 * 69.005 * 5280 + 12.080 * 6072.5
74° 12.080' W = 2,69,61,633.6 + 73,355.8
74° 12.080' W = 2,70,34,989.4 feet
The length of side B (40° 51.485' N, 74° 12.080' W)
40° 51.485' N = 1,13,25,866.44 feet.
74° 12.080' W = 2,70,34,989.4 feet.
Side A = Side B = 1,13,25,866.44 ft N, 2,70,34,989.4 ft W.
To know more about length,
https://brainly.com/question/2552853
#SPJ1
Projections of a vector make up the components of that vector. Is this true or false?
The given statement 'Projections of a vector make up the components of that vector' is true. The direction of a vector
A 590 kg elevator accelerates upward at 1.1 m/s2 for the first 15 m of its motion. How much work is done during this part of its motion by the cable that lifts the elevator? Neglect any friction.
The work done by the elevator is - 86.730kj
It should be converted to energy in order to move an object. Energy can be transferred by the use of force. Work done refers to the amount of energy used by a force to move an object.
We are given that ,
The mass of the elevator = m = 590 kg
The acceleration of the elevator upward = 1.1m/s²
The height of the elevator = d = 15m
Therefore, T is the tension of the cable pulling the elevator upwards then the formulation of the work done of the elevator may be given as,
Work done = Force × distance
W = F × d
i.e. F = - mg
Above negative force due to gravity is acting opposite direction to the motion having an upward acceleration.
Thus , from above two equations we can write as,
W = - (mg)(d)
W = -(590kg)(9.8m/s²)(15m)
W = - 86730j
W = - 86.730kj
To know more about work done
https://brainly.com/question/15522124
#SPJ1
Two remote control cars with masses of 1.13 kilograms and 1.94 kilograms travel toward each other at speeds of 8.50 meters per second and 3.79 meters per second, respectively. The cars collide head-on, and the less massive car recoils with a speed of 2.02 meters per second. What is the total kinetic energy of the two cars before the collision? Include units in your answer. Answer must be in 3 significant digits.
How much force must be applied to push a 253.2 kg crate across the floor at a constant velocity if the coefficient of kinetic friction is 0.55?
Given,
The mass of the crate, m= 253.2 kg
The coefficient of the kinetic friction between the floor and the crate, μ=0.55
Given that the crate is pushed with a constant velocity. That is the net force on the crate is zero.
The only two forces acting on the crate are the force with which it is being pushed and the friction that is opposing the applied force.
The net force on the crate is given by,
[tex]\begin{gathered} F_n=0=F-f \\ =F-mg\mu \end{gathered}[/tex]Where f is the frictional force between the floor and the crate, F is the applied force, and g is the acceleration due to gravity.
On substituting the known values,
[tex]\begin{gathered} F-253.2\times9.8\times0.55=0 \\ \Rightarrow F=253.2\times9.8\times0.55 \\ =1364.75\text{ N} \end{gathered}[/tex]Thus the force with which the crate must be pushed is 1364.75 N
A roller coaster has a vertical loop with radius 22.8 m. With what minimum speed should the roller-coaster car be moving at the top of the loop so that the passengers do not lose contact with the seats?
Given,
The radius of the loop of the roller coaster, r=22.8 m
The forces that are acting on the roller coaster when it is at the top of the loop are the centripetal force directed upwards and the weight of the roller coaster including the passengers directed downwards.
For the passengers to stay in the seat, the centripetal force must be, at the least, equal to the weight of the passengers and the rollercoaster.
That is,
[tex]\frac{Mv^2}{r}=Mg[/tex]Where M is the combined mass of the rollercoaster and the passengers, v is the minimum speed of the roller coaster when it is at the top of the loop, and g is the acceleration due to gravity.
On simplifying the above equation,
[tex]v=\sqrt[]{gr}[/tex]On substituting the known values,
[tex]\begin{gathered} v=\sqrt[]{9.8\times22.8} \\ =14.95\text{ m/s} \end{gathered}[/tex]Thus the minimum speed that the roller coaster must have when it is at the top of the loop so that the passengers stay in contact with the seats is 14.95 m/s.
Three resistors with resistances of 9 Ω, 18 Ω, and 30 Ω are in a series circuit with a 12 volt battery. What is the total resistance of the resistors in the circuit?
When resistors are in series, the total resistance is equal to the sum of the individual resistances of each resistor. Thus, the total resistance in this circuit is 9+18+30 = 57Ω
What is the energy of a proton accelerated through a potential difference of 500,000 V?
ANSWER
[tex]8.01\cdot10^{-14}J[/tex]EXPLANATION
We want to find the energy of the proton accelerated through the given potential.
To do this, apply the relationship between energy and potential:
[tex]V=\frac{E}{q}[/tex]where q = charge
V = potential
The charge of a proton is:
[tex]1.602\cdot10^{-19}C[/tex]Therefore, we have that the energy of the proton is:
[tex]\begin{gathered} E=V\cdot q \\ E=500000\cdot1.602\cdot10^{-19} \\ E=8.01\cdot10^{-14}J \end{gathered}[/tex]That is the answer.
The nearest star to the Earth (other than the Sun) is about 4.0 lightyears away. A lightyear, ly, is the distance light travels in one year. Voyager 1 is traveling at 38,500 miles per hour. How long will it take Voyager 1 to reach the nearest star in years?
First, let's convert the distance of 4 lightyears to miles:
[tex]4\text{ ly}=4\cdot5.879\cdot10^{12}\text{ miles}=23.516\cdot10^{12}\text{ miles}[/tex]Now, let's find the time required:
[tex]\begin{gathered} distance=speed\cdot time\\ \\ 23.516\cdot10^{12}=38500\cdot t\\ \\ t=\frac{23.516\cdot10^{12}}{38500}\\ \\ t=6.10805\cdot10^8\text{ hours} \end{gathered}[/tex]Then, we need to convert from hours to years:
[tex]6.10805\cdot10^8\text{ hours}=\frac{6.10805\cdot10^8}{8760}=6.97266\cdot10^4\text{ years}[/tex]Therefore it will take approximately 69727 years.
According to the law of conservation of charge which statement can be true?A. A silk cloth gained charge. B. A metal rod lost charge.C. A peice of glass transferred electrons to felt. D. A balloon remains neutrally charged when rubbed.
Option D
Explanation:The law of conservation of charge states that the amount of charge in a system is constant
This means that as time changes, the amount of charge in a system does not change
By careful consideration of the options stated:
Each of options A to C either shows that charge is lost or gained
Only option D typifies the law of conservation of conservation of charges because charges are not lost or gained by the ballon so described.
part a. A delivery drone, hovering at an altitude of 260. m above the ground, drops a package. ("dropped" means that it was stationary when released ). How long will it take to reach the ground? part b. What will be the velocity of the package the instant before it hits the ground?
Given:
h= 260m (height)
a = 9.8 m/s^2 (acceleration due to gravity )
Apply:
• a)
h = 1/2 a t^2
Replacing:
260 = 1/2 (9.8) t^2
260 / (1/2 * 9.8 ) = t^2
t = √[260 / (1/2 * 9.8 ) ]
t = 7.28 s
• b)
Apply.:
Vf = vi + at
Vf = finale velocity
Vi = initial velocity ( rest ) = 0 m/s
Vf = -9.8 (7.28 ) = -71.34 m/s
If the atomic mass of carbon is 12 amu, how much mass of carbon would be needed to have anAvogadro's number (1 mole) of carbon atoms?A. 12 mgB. 12 gC. 12 kgD. 12 lbs
Given:
Atomic mass of carbon = 12 amu
Let's find how much mass of carbon would be needed to have an Avogadro's number (1 mole) of carbon atoms.
Given that the atomic mass of carbon is 12 atomic mass unit (amu), the amount of mass that would be need for 1 mole of carbon atom is = 12 g
ANSWER:
12 g
For each, find the radius, diameter, and circumference of the circular object (one of these measurements is given in the problem). When working with the circumference, use π and round to the nearest whole number. a. Breaking a cookie in half creates a straight side 10 cm long.radius: cmdiameter: cmcircumference: cm
ANSWER
• radius: ,5 cm
,• diameter: ,10 cm
,• circumference: ,31 cm
EXPLANATION
If we assume that the cookie is round, when we cut it in half we'll have the following shape:
The straight side is the diameter of the cookie, which is 10 cm long.
The radius of a circle is half the diameter, hence the radius of the cookie is 5 cm.
The circumference is,
[tex]C=\pi\cdot d[/tex]Where d is the diameter of the circle. In this case, this is 10cm,
[tex]C=\pi\cdot10\operatorname{cm}\approx31\operatorname{cm}[/tex]The circumference of the cookie is 31 cm, rounded to the nearest whole number.
Power equals work multiplied by time.Question 9 options:TrueFalse
The power in terms of work done and time is defined as,
[tex]P=\frac{W}{t}[/tex]Thus, power is is workdone per unit time.
Hence, given statement is false.
1.In a simple circuit a 6-volt dry cell pushes charge through a single lamp which has a resistance of 3 Ω. According to Ohms law the current through the circuit is 2 Amps.2.If a second identical lamp is connected in series, the 6-volt battery must push a charge through a total resistance of 6Ω. The current in the circuit is then 1 Amps.3.If a third identical lamp is connected in series, the total resistance is now 9Ω.4.The current through all three lamps in series is now _________ Amps. The current through each individual lamp is __________ Amps.
ANSWER
The current through all three lamps in series is now 0.67 Amps. The current through each individual lamp is 0.67 Amps.
EXPLANATION
There are three lamps connected in series, each with a resistance of 3 Ω, resulting in a total resistance of 9 Ω.
By Ohm's law, if the voltage from the battery is 6 V, then the current through all three lamps - i.e. the total current in the circuit is,
[tex]I=\frac{V}{R_{eq}}=\frac{6V}{9\Omega}=\frac{2}{3}Amps\approx0.67Amps[/tex]And, since the three lamps are connected in series - which means there are no dividing paths, the current through each individual lamp is the same as the total current of the circuit, 0.67 Amps.
Hence, the current through all three lamps and through each individual lamp is 0.67 Amps, rounded to the nearest hundredth.
A 2.5 kg canoe is traveling up the mississippi river at a velocity of 10m/s, north. What is its kinetc energy
Answer:
Explanation:
Given:
m = 2.5 kg
V = 10 m/s
__________
Wk - ?
Wk = m·V² / 2
Wk = 2.5·10² / 2 = 125 J
A 5 cm spring is suspended with a mass of 1 g attached to it which extends the spring by 3.2 cm. The same spring is placed on a frictionless flat surface and charged beads are attached to each end of the spring. With the charged beads attached to the spring, the spring's extension is 0.01 m. What are the charges, in micro-Coulombs, of the beads?
First, we need to find the spring constant
Force of gravity = force of tension from spring
mg = kx
(1x10^-3)(9.8) = k (3.2x10^-2)
k = .30625
Now we can look at the other situation
Since the spring was moved 0.01 meters, we can find the force
F = kx = (.01)(.30625) = .0030625 N
Now we can set the electric force equal to the force of the beads
kq^2/r^2 = .0030625 N
q = 292 microCoulombs
The amount of work done by two boys who apply 300 N of force in an unsuccessful attempt to move a stalled car is:1. 600 N · m.2. 300 N.3. 300 N · m.4. 600 N.5. 0.
The work done by a force can be calculated with the formula below:
[tex]W=F\cdot d[/tex]Where W is the work in J, F is the force in N and d is the distance in meters.
Since in this case, the attempt was unsuccessful, the car didn't move, so the distance is zero.
Therefore the work is zero, and the correct option is 5 (work is zero).