An interesting question is “In what direction is the dot (representing a particle in the medium)moving at the instant shown above?” The correct answer is “_______”. The way to understandthat is to imagine the pulse an instant later. The wave will have moved a bit to the right.Therefore, since the particle is still on the wave, and can only move up or down, it must be______.

An Interesting Question Is In What Direction Is The Dot (representing A Particle In The Medium)moving

Answers

Answer 1

We will have the following:

The correct answer is vertically.

The way to understand that is to image the pulse an instant later. The wave will have moved a bit to the right. Therefore, since the particle is still on the wav, and can only move up or down, it must be lower.


Related Questions

Hi can you help me understand how to do this?

Answers

From the information given,

initial velocity of parachute = 198 ft/s

We want to convert 198 ft/s to m/s

Recall,

1 m = 3.3 ft

x m = 198 ft

By crossmultiplying, we have

3.3x = 198

x = 198/3.3

x = 60

Thus,

198 ft/s = 60 m/s

Rate = 60 m/s

To determine the distance that the parachute will fall in 10 seconds, we would apply one of Newton's equations of motion which is expressed as

s = ut + 1/2gt^2

where

s = distance covered

u = initial velocity

t = time

g = acceleration due to gravity and its value is - 9.8m/s^2

From the information given,

t = 10

u = 60

By substituting these values into the formula, we have

s = 60 x 10 - 1/2 x 9.8 x 10^2

s = 600 - 490

s = 110

The distance covered by the parachute in 10s is 110 m

When a rubber band with a force constant of 58.7 N/m is stretched a certain distance,
there is 1.94 J of elastic potential NRG stored in it. How far has the band been stretched

Answers

According to the given statement the band has been stretched far  is  0.25 m.

What is the meaning of elastic potential?

The energy that is stored when a force is used to bend an elastic object is known as elastic potential energy. Until the force is released as well as the object springs returns to its original form, doing work in the process, the energy is retained. The object may be squeezed, stretched, or bent during the deformation.

What's an example of elastic potential energy?

For example, if you pull a spring, it will return to its initial form when you release it (energy input equals energy output.) Elastic potential energy is rendered possible by this.

Briefing:

U= 1.94 J

k  = 58.7  N/m

U = 1/2 kΔ x²

1.94 = 1/2 kΔ x²

3.88/58.7 = Δ x²

x = √(3.88 /58.7)

x = 0.25 m

To know more about Elastic potential visit:

https://brainly.com/question/14687790

#SPJ13

A sled of mass 26 kg has an 18 kg child on it. If big brother is pulling with a 30 N force to the right and 10 N up, and big sister is pushing with a 40 N force to the right and 16 N down, what is the normal force?

Answers

Given data:

* The mass of the sled is m_1 = 26 kg.

* The mass of the child is m_2 = 18 kg.

* The force in the upwards direction by the big brother is F_1 = 10 N.

* The force in the downwards direction by the big sister is F_2 = 16 N.

Solution:

The net mass on the sled along with the child is,

[tex]\begin{gathered} m=m_1+m_2 \\ m=26+18 \\ m=44\text{ kg} \end{gathered}[/tex]

The net weight of the sled along with the child is,

[tex]\begin{gathered} w=mg \\ w=44\times9.8 \\ w=431.2\text{ N} \end{gathered}[/tex]

The weight of the sled along the child is acting on the sled in the downwards direction.

Thus, the normal force acting on the sled (taking upward force as negative and downward force as positive) is,

[tex]\begin{gathered} N=w+F_2-F_1 \\ N=431.2+16-10 \\ N=437.2\text{ newton} \end{gathered}[/tex]

Thus, the normal force acting on the sled is 437.2 N.

Look at Figure 13-17 to answer the question.Will the acceleration of the piano be greater in A or in B? Use Newton's second law ofmotion to explain your answer.

Answers

Answer:

Explanation:

Newton's second law states that the applied force is directly proportional to the rate of change of momentum

momentum = mass x velocity

Rate of change in momentum = (final momentum - initial momentum)/time

Rate of change in momentum = m(v - u)/t

where

v is final velocity

u is initial velocity

t is times

Recall,

Acceleration = (v - u)/t

Thus, the equation becomes

Force = ma

This means that as the force increases, the acceleration increases.

Considering the given scenarios,

First piano is pushed by force from the man

For second piano, there is additional force from the woman and the mass of the piano remains the same. Since there is more force, there is more acceleration. Thus,

Acceleration is greater in B

Question 10 of 10If one of two interacting charges is doubled, the force between the chargeswillO A. decrease by 4 timesO B. increaseC. decreaseD. stay the sameSUBMIT

Answers

The force between the two charges is

[tex]Force\text{ }\propto\text{ charge}[/tex]

Thus, if the charge is doubled, then its force will also be doubled.

Hence the correct option is increase.

Which label goes through the horizontal axis?

A. Distance
B. Acceleration
C. Force
D. Mass

Answers

Answer:

A: Distance

Explanation:

You can not change gravity with acceleration or force in a weird way. Only mass and distance really affect gravity in normal physics.

Gravity is stronger when two objects are closer. Therefore gravity would decrease as distance increased.

Mass increases gravity.

The image below shows that gravity (depth) increases as the distance from the black hole decreases.

If a space ship traveling at a 1000 miles per hour enters and area free of Gravitational forces,it’s engine must run at some minimum level in order to maintain the ships velocity. is this statement true or false

Answers

The given statement is false.

If a spaceship traveling at 1,000 miles per hour enters an area free of gravitational forces, its engine must run at some maximum level in order to maintain the ship’s velocity

A Tour de France cyclist at a rate of 6.5 m/s and is 333 m
ahead of a crew van with powerdrink refills. The van is
traveling at 15 m/s and is accelerating at a constant rate of
0.4 m/s2
How much time will it take for the crew van to catch up
with the cyclist?

Answers

Given data:

* The speed of the cyclist is 6.5 m/s.

* The initial distance of the cyclist from the van is 333 m.

* The initial velocity of the van is 15 m/s.

* The acceleration of the van is,

[tex]a=0.4ms^{-2}[/tex]

Solution:

Let x be the distance from the van initial position at which the cyclist and van meet.

Let the cyclist meet the van at time t.

By the kinematics equation, the position of the cyclist at time t is,

[tex]x-333=u_ct+\frac{1}{2}a_ct^2[/tex]

where u_c is the speed of the cyclist, a_c is the acceleration of the cyclist, t is the time taken and 333-x is the distance traveled by the cyclist at time t,

The acceleration of the cyclist is zero.

Substituting the known values,

[tex]\begin{gathered} x-333=6.5t+0 \\ x-333=6.5t \end{gathered}[/tex]

By the kinematics equation, the position of the van after time t is,

[tex]x=u_vt+\frac{1}{2}a_vt^2[/tex]

where u_v is the velocity of the van, a_v is the acceleration of the van, and t is the time taken,

Substituting the known values,

[tex]\begin{gathered} x=15t+\frac{1}{2}\times0.4\times t^2 \\ x=15t+0.2t^2 \end{gathered}[/tex]

Substituting this value of x in the kinematics equation of the cyclist,

[tex]\begin{gathered} (15t+0.2t^2)-333=6.5t \\ 15t+0.2t^2-6.5t-333=0 \\ 0.2t^2+8.5t-333=0 \end{gathered}[/tex]

By solving the quadratic equation,

[tex]\begin{gathered} t=\frac{-8.5\pm\sqrt[]{8.5^2-(4\times0.2\times(-333))}}{2\times0.2} \\ t=\frac{-8.5\pm\sqrt[]{^{}8.5^2+(4\times0.2\times333)}}{2\times0.2} \\ t=\frac{-8.5\pm18.4}{0.4} \\ t=24.8\text{ s or-67.25 s} \end{gathered}[/tex]

As the value of time cannot be negative.

Thus, the time at which the cyclist and van meet is 24.8 seconds.

A bus is travelling along straight road at 100km/hr and the bus conductor walks a 6km/hr on the floor of the bus and in the same direction as the bus. Find the speed of the conductor relative to the road and relative to the bus. If the bus conductor now walks at the same rate but in opposite direction as the bus, find his new speed relative to the road.

Answers

Given data:

* The speed of the bus is 100 km/hr.

* The speed of the conductor is 6 km/hr.

Solution:

(a). If the bus and conductor are traveling in the same direction.

The net speed of the conductor relative to the road is,

[tex]v_1=v_b+v_c_{}[/tex]

where v_1 is the velocity of the conductor relative to the road, v_b is the velocity of the bus, and v_c is the velocity of the conductor inside the bus,

Substituting the known values,

[tex]\begin{gathered} v_1=100+6 \\ v_1=106\text{ km/hr} \end{gathered}[/tex]

Thus, the speed of the conductor relative to the road is 106 km/hr.

(b). The speed of the conductor relative to the bus is the speed of the conductor on the bus,

Thus, the speed of the conductor relative to the bus is 6 km/hr.

You and some friends are duck pin bowling. You’re up and you roll your bowling ball (m = 1.6kg) down the lane. It collided with one pin (0.68kg) on the end in a perfectly elastic one dimensional collision. If the ball was moving at a velocity of 6 m/s just before it hits the pin, what is the velocity of the bowling pin after the collision?

Answers

Given:

The mass of the bowling ball is m1 = 1.6 kg

The mass of the pin is m2 = 0.68 kg

The initial velocity of the ball is

[tex]v_i=\text{ 6 m/s}[/tex]

Required: Velocity of the bowling pin after the collision.

Explanation:

According to the conservation of momentum, the velocity after the collision will be

[tex]\begin{gathered} m1v_i+m2\times0\text{ =\lparen m1+m2\rparen v}_f \\ v_f=\frac{m1v_i}{m1+m2} \\ =\frac{1.6\times6}{1.6+0.68} \\ =4.21\text{ m/s} \end{gathered}[/tex]

Final Answer: The velocity of the bowling pin after the collision is 4.21 m/s

A 50 kW tractor moves at a speed of 2.5 m/s. What is the traction force of the tractor?

Answers

In order to calculate the force, we can use the formula below:

[tex]P=F\cdot v[/tex]

Where P is the power (in W), F is the force (in N) and v is the velocity (in m/s).

So we have:

[tex]\begin{gathered} 50000=F\cdot2.5\\ \\ F=\frac{50000}{2.5}\\ \\ F=20000\text{ N} \end{gathered}[/tex]

Therefore the traction force is 20 kN.

A student pushes a baseball of m = 0.13 kg down onto the top of a vertical spring that has its lower end fixed to a table, compressing the spring a distance of d = 0.18 meters from its original equilibrium point. The spring constant of the spring is k = 970 N/m. Let the gravitational potential energy be zero at the position of the baseball in the compressed spring.

A. What is the maximum height, h, in meters, that the ball reaches above the equilibrium point?

B. What is the ball’s velocity, in meters per second, at half of the maximum height relative to the equilibrium point?

Answers

The maximum height reached by the baseball above the equilibrium point is 12.14 m.

The ball’s velocity, in meters per second, at half of the maximum height relative to the equilibrium point is 458.8 m/s.

What is the maximum height attained by the ball?

The maximum height reached by the ball is determined as follows:

Data given:

compression of the spring is d = 0.18 m.mass of the baseball is m = 0.13 kgthe spring constant, K = 970 N/m

The gravitational potential energy at the compressed position is zero.

Based on the law of conservation of energy, the total energy of the system is conserved.

Let the final height from the bottom be h

m * g* h = ¹/₂ * K * d²

h = (k * d²) / (2 * m * g)

h = 970 * 0.18² / (2 * 0.13 * 9.81)

h = 12.32 m

Height above the equilibrium point = 12.32 - 0.18

Height above the equilibrium point = 12.14 m

Velocity is calculated1 as follows:

Half of the maximum height relative to the equilibrium point = 12.14/2 + (0.18) = 6.25 m

¹/₂ * m * v² = ¹/₂ * K * d²

m * v² = K * d²

v = √(K * d² / m)

v = √(970 * 6.25² / 0.13)

v = 458.8 m/s

Learn more about spring constant at: https://brainly.com/question/22712638

#SPJ1

What is the momentum of a 934 kg car moving 10 m/s?

Answers

ANSWER:

9340 kg*m/s

STEP-BY-STEP EXPLANATION:

Given:

Mass (m) = 934 kg

Speed (v) = 10 m/s

The formula to calculate the momentum is as follows:

[tex]\begin{gathered} p=m\cdot v \\ \text{ we replacing} \\ p=934\cdot10 \\ p=9340\text{ kg*m/s} \end{gathered}[/tex]

The momentum of the car is 9340 kg*m/s.

A flywheel with a moment of inertia of 3.45 kg·m2is initially rotating. In order to stopits rotation, a braking torque of -9.40 N·m is applied to the flywheel. Calculate the initialangular speed of the flywheel if it makes 1 complete revolution from the time the brake isapplied until it comes to rest

Answers

Given data

*The given moment of inertia is I = 3.45 kg.m^2

*The given braking torque is T = -9.40 N.m

*The angular distance traveled is

[tex]\theta=(1\times2\pi)rad_{}[/tex]

*The final angular speed is

[tex]\omega=0\text{ rad/s}[/tex]

The angular acceleration of the flywheel is calculated by using the torque and moment of inertia relation as

[tex]\begin{gathered} T=I\alpha \\ \alpha=\frac{T}{I} \\ =\frac{-9.4}{3.45} \\ =-2.72rad/s^2 \end{gathered}[/tex]

The formula for the initial angular speed of the flywheel is given by the rotational equation of motion as

[tex]\omega^2-\omega^2_0=2a\theta[/tex]

Substitute the known values in the above expression as

[tex]\begin{gathered} (0)^2-\omega^2_0=2\times(-2.72)(2\pi) \\ \omega_0=\sqrt[]{2\times2.72\times2\pi} \\ =5.88\text{ rad/s} \end{gathered}[/tex]

Hence, the initial angular speed of the flywheel is 5.88 rad/s

A convex spherical mirror has a radius of curvatureof 9 40 cm. A) Calculate the location of the image formed by an 7.75mm tall object whose distance from the mirror is 17.5 cmCalculate the size of the imageC) Calculate the location of the image formed by an 7.75mm tall object whose distance from the mirror is 10.0cmE) Calculate the location of the image formed by an 7.75mm tall object whose distance from the mirror is 2.65cmG) Calculate the location of the image formed by an 7.75mm tall object whose distance from the mirror is 9.60m

Answers

0.We are asked to determine the location of an image formed by an 7.75mm tall object that is located a distance of 17.5 cm from a convex mirror.

First, we will calculate the focal length using the following formula:

[tex]f=-\frac{R}{2}[/tex]

Where:

[tex]\begin{gathered} f=\text{ focal length} \\ R=\text{ radius} \end{gathered}[/tex]

Substituting the values we get:

[tex]f=-\frac{9.40cm}{2}[/tex]

Solving the operations:

[tex]f=-4.7cm[/tex]

Now, we use the following formula:

[tex]\frac{1}{d_o}+\frac{1}{d_i}=\frac{1}{f}[/tex]

Where:

[tex]\begin{gathered} d_0=\text{ distance of the object} \\ d_i=\text{ distance of the image} \end{gathered}[/tex]

Now, we substitute the known values:

[tex]\frac{1}{17.5cm}+\frac{1}{d_i}=-\frac{1}{4.7cm}[/tex]

Now, we solve for the distance of the image. First, we subtract 1/17.5 from both sides:

[tex]\frac{1}{d_i}=-\frac{1}{4.7cm}-\frac{1}{17.5cm}[/tex]

Solving the operation:

[tex]\frac{1}{d_i}=-0.27\frac{1}{cm}[/tex]

Now, we invert both sides:

[tex]d_i=\frac{1}{-0.27}cm=-3.7cm[/tex]

Therefore. the location of the image is -3.7 centimeters.

The other parts are solved using the same procedure.

Part B. To calculate the size of the image we will use the following relationship:

[tex]\frac{h_i}{h_o}=-\frac{d_i}{d_0}[/tex]

Where:

[tex]h_i,h_0=\text{ height of the image and height of the object}[/tex]

Substituting we get:

[tex]\frac{h_i}{7.75mm}=-\frac{-3.7cm}{17.5cm}[/tex]

Solving the operations on the right side:

[tex]\frac{h_i}{7.75mm}=0.21[/tex]

Now, we multiply both sides by 7.75:

[tex]h_i=(7.75mm)(0.21)[/tex]

Solving the operations:

[tex]h_i=1.64mm[/tex]

Therefore, the height of the iamge is 1.64 mm.

27. Scientists have observed an increase in global temperatures over the past 100 years. Which phenomena do scientists believe contributes to the increase in temperatures? A. an increase in undersea volcanic activity B. a decrease in the distance between Earth and the Sun C. an increase in certain gases released during the use of fossil fuels D. a decrease in the amount of water on Earth due to overconsumption

Answers

The answer is letter C) An increase in certain gases released during the use of fossil fuels. Although the others do cause an increase in temperature, their scale cannot be compared to the one caused by fossil fuels.

upon leaving her club, the golf ball moved upward to a height above the surrounding trees. is the ke and pe increasing, decreasing, or staying the same?

Answers

ANSWER

PE increases and KE decreases

EXPLANATION

As described, the golf ball is moving and changing its height, like in the following diagram,

By the law of conservation of energy, the total energy when the ball starts moving and during the whole motion until it stops, must be the same. This total energy is the sum of the potential energy and the kinetic energy.

When the club hits the ball, it gives it a certain amount of kinetic energy but no potential energy. As the ball starts going uphill, the potential energy starts to increase, since it depends on the height of the object. Therefore, to maintain the total energy constant, the kinetic energy must decrease.

Two identical point charges exert a repulsive force of 0.500 N on one another when separated by 1.5 m. What is the magnitude of the net charge of either point charge?

Answers

Given,

The repulsive force exerted by the charges, F=0.500 N

The distance between the charges, d=1.5 m

From Coulomb's law,

[tex]F=\frac{\text{kqq}}{r^2}[/tex]

Where q is the magnitude of the charge of each point charge and k is the coulomb's constant.

On rearranging the above equation,

[tex]\begin{gathered} F=\frac{kq^2}{r^2} \\ \Rightarrow q=\sqrt[]{\frac{F}{k}}r \end{gathered}[/tex]

On substituting the known values,

[tex]\begin{gathered} q=\sqrt[]{\frac{0.5}{9\times10^9}}\times1.5 \\ =1.1\times10^{-5}\text{ C} \end{gathered}[/tex]

Thus the magnitude of the charge of each point charge is 1.1×10⁻⁵ C

Therefore the correct answer is option B.

Two plastic blocks of the same plastic material have the following characteristics:

Block A: Mass 10 g, Volume 25 mL, and
Block B: Mass 20 g, Volume 50 mL.
Which of the statements below is true? (Density of water is 1g/mL at room temperature.)

Group of answer choices

Both blocks will sink equally under water.

Block A will sink deeper under water.

Both blocks will float equally over water.

Block B will float more than Block A over water.

Answers

The true statement, given the data from the question is: Both blocks will float equally over water.

How to determine the true statement

To know which statement is true, we shall obtain the density of each blocks. Details below

For block A:

Mass of block A = 10 gramsVolume of block A = 25 mL Density of block A = ?

Density = mass / volume

Density of block A = 10 / 25

Density of block A = 0.4 g/mL

For block B:

Mass of block B = 20 gramsVolume of block B = 50 mL Density of block B = ?

Density = mass / volume

Density of block B = 20 / 50

Density of block B = 0.4 g/mL

From the above calculation, we can see that the two blocks have the same density.

Thus, we can conclude that the true statement is both blocks will float equally over water.

Learn more about density:

https://brainly.com/question/952755

#SPJ1

In a system of 2 large round objects, R1 and R2 (R1 is larger), what properties will affect the force of gravity between them? (select all that apply)

Answers

According to Newton's Law of Universal Gravitation, if two particles with masses M and m are located a distance r from each other, an attractive force between them appears, and its magnitude is given by:

[tex]F=G\frac{Mm}{r^2}[/tex]

Where G is the gravitational constant:

[tex]G=6.67\times10^{-11}N\frac{m^2}{\operatorname{kg}^2}[/tex]

From the equation, we can see that the properties that affect the force between them are their masses and the distance between them.

Then, the correct choices are:

- Mass of R1

- Mass of R2

- Distance from the center of R1 to the center of R2.

some more disconnectiob

Answers

let the student report the tutor and check

answer is updated

answer is updated olalalala

olalalala 2

olalalala 3

Will give brainliest!

A pair of fuzzy dice is hanging by a string from your rearview mirror. While you are accelerating from a stop-light to 28 m/s in 6.0 s, what angle theta does the string make with the vertical?

Answers

For the pair of fuzzy dice hanging by a string from the rearview mirror, while accelerating from a stop-light to 28 m/s in 6.0 s, the string makes an angle of 25.5 degrees with the vertical.

What is an angle?

An angle is the figure formed by two rays, called the sides of the angle, sharing a common endpoint, called the vertex of the angle.

Parameters given include:

velocity: 28,/s time= 6.0 seconds

a = v/t = 28m/s / 6.0s = 4.667 m/s²

Taking into account the forces acting on the dice...there is a force of gravity acting straight down with a magnitude of mg.

so we have that

Angle = tan-1(a/g)

Angle = tan-1(4.667 / 9.8) =  25.5 degrees.

Learn more about angles at ; https://brainly.com/question/25215131

#SPJ1

If an airplane is running low on fuel, the pilot may decide to dump unneededweight. As the airplane gets lighter, the engines need less fuel to generate thesame amount of acceleration for flight. The pilot has taken advantage ofNewton's law of motion.A. fourthB. thirdO C. firstD. second

Answers

According to Newton's second law we have that the force is equivalent to the product of the mass and the acceleration:

[tex]F=ma[/tex]

This means that if we decrease the mass "m" of the object the required force is decreased also. Since the force is proportional to the required energy and the energy comes from the fuel consumption this means

cassy can get more force on the bricks she breaks with a blow of her bare hand when _______.

Answers

Answer:Her hand is made to bounce from the bricks

Explanation:

Cassy can get more force on the bricks that she breaks with a blow of her bare hand when her hand is made to bounce from the bricks,

What is Force?

A force in physics is an effect that has the power to alter an object's motion. A mass-containing object's speed can vary, or accelerate, as a result of a force. Intuitively, a pull or a push can also be used to describe force. Being a vector quantity, a force also has magnitude and direction. The SI unit of newton is used to measure it (N). The letter F stands for force.

According to Newton's second law's original formulation, an object's net force is equal to the speed at which momentum is changing over time.

Objects' velocities can be altered by the concepts of push, drag, and torque. Thrust causes an object's velocities to increase, while torque causes an object's velocities to decrease. Each part of an extended body typically exerts pressures on its neighboring sections, and the internal mechanical force is determined by how these stresses are distributed.

To know more about Force:

https://brainly.com/question/13191643

#SPJ12

Writing Simple ExpressionsChoose all of the TRUE statement(s).Add 6 and 5, then multiply by 4 is the same as 4(6 + 5).4 times greater than 80 + 25 is the same as 4 x (80 + 25).Subtract 15 from 42 is the same as 15 − 42.9 times greater than 11 + 12 is the same as 9 + 11 + 12.8 times greater than 21 + 15 is the same as 8(21 + 15).

Answers

Add 6 and 5, then multiply by 4 is the same as 4(6 + 5). TRUE

4 times greater than 80 + 25 is the same as 4 x (80 + 25). TRUE

Subtract 15 from 42 is the same as 15 − 42. TRUE

9 times greater than 11 + 12 is the same as 9 + 11 + 12. FALSE

9 (11+12)

8 times greater than 21 + 15 is the same as 8(21 + 15). TRUE

When you apply a force F on an object of mass of m, it would produce acceleration a. If you apply the same force on another object of mass 2m, how would be the acceleration of the second object?

Answers

ANSWER

[tex]\frac{a}{2}[/tex]

EXPLANATION

When a force is applied on an object of mass m, it produces an acceleration of a.

We can represent this relationship using Newton's second law of motion:

[tex]\begin{gathered} F=ma \\ \Rightarrow a=\frac{F}{m} \end{gathered}[/tex]

Now, the same force is applied on an object with a mass of 2m.

Let the acceleration experienced by the object be a1. This implies that:

[tex]\begin{gathered} F=\left(2m\right)\left(a_1\right) \\ \Rightarrow a_1=\frac{F}{2m} \end{gathered}[/tex]

We can write this new acceleration in terms of a as follows:

[tex]\begin{gathered} a_1=\frac{1}{2}\left(a\right) \\ a_1=\frac{a}{2} \end{gathered}[/tex]

That would be the acceleration of the second object.

The answer is the third option.

What is the gravitational force between two trucks, each with a mass of 2.0 x 10^4 kg, that are 2.0m apart? (G=6.673 x 10^-11 N•m^2/kg^2)

Answers

Firs we will use the next formula

[tex]F=G\text{ }\frac{m_1\cdot m^{}_2}{r^2}[/tex]

Where G is the gravitational force, m nd m2 are the masses and r is the distance between the masses

In our case

m1=m2= 2.0 x 10^4 kg

r= 2m

G=6.673 x 10^-11 N•m^2/kg^2

We substitute

[tex]F=6.673\times10^{-11}\cdot\frac{2.0x10^4\cdot2.0x10^4}{2^2}=0.0066743N=6.7\times10^{-3}[/tex]

ANSWER

The gravitational force is 0.00667=6.7x10^-3N

I dont understand this formula I need helpF = 6.67408 * 10^-11 * (1.5 * 10^5) (8.5 * 10^2) ------------------------------ 2500^2

Answers

Answer:

F = 1.36*10^-9

Explanation:

The given equation is

[tex]F=6.67\ast10^{-11}\ast\frac{(1.5\ast10^5)(8.5\ast10^2)}{2500^2}[/tex]

To calculate the value of F, you need to multiply 1.5*10^5 by 8.5*10^2 as follows:

[tex]F=6.67\ast10^{-11}\ast\frac{1.275\times10^8}{2500^2}[/tex]

Then, 2500² = 2500 x 2500 = 6.25 * 10^6, so replacing the value, we get:

[tex]F=6.67\ast10^{-11}\ast\frac{1.275\ast10^8}{6.25\ast10^6}[/tex]

Now, we need to divide 1.275*10^7 by 6.25*10^6, so

[tex]F=6.67\ast10^{-11}\ast(20.4)[/tex]

Finally, multiply 6.67*10^-11 by 20.4, so

[tex]F=1.36\ast10^{-9}[/tex]


Name the instrument which is made on the basis of expansion of heat. ​

Answers

The instrument is the Thermometer

Answer:

It is a thermometer and it helps to see the temperature

The highest frequencies humans can hear isabout 20000 Hz.What is the wavelength of sound in airat this frequency?The speed of sound is310 m/s.

Answers

Given

The highest frequency human can hear is f=20000 Hz

Speed of the sound,v=310 m/s

To find

The wavelength

Explanation

We know,

The wavelength is given by

[tex]\begin{gathered} \lambda=\frac{v}{f} \\ \Rightarrow\lambda=\frac{310}{20000} \\ \Rightarrow\lambda=0.0155\text{ m} \end{gathered}[/tex]

Conclusion

The wavelength is 0.0155 m

Other Questions
You are planning to place a bet on your local sports team, the red sparrows. the sparrow's have a past record of 4-5 (4 wins, 5 losses) at this venue. however you also know that their record is 2-7 in games where it rains and it has rained at 60% of their games this season. 4 if the red sparrows win their game what is the probability that it rained at that game? Suppose theta is an angle in the standard position whose terminal side is in quadrant 1 and sin theta = 84/85. find the exact values of the five remaining trigonometric functions of theta Why was Nelson Mandela imprisoned in South Africa?A Encouraging followers to use violent methods when protesting(B) Promoting the apartheid system after it was endedc) Using violence against people who agreed with the apartheid systemD) Treason and sabotage against South Africa's government In a 92 s interval, 562 hailstones strike a glasswindow of area 1.216 m at an angle 64 to thewindow surface. Each hailstone has a mass of2 g and speed of 5.8 m/s.If the collisions are elastic, find the averageforce on the window.Answer in units of N. If you cut me in half, my end face will remain the same. Two of my faces are the same, one is curved. What am I? How many groups are attached to a center atom with trigonal planar geometry? 3 groups 1 group 5 groups 4 groups A car wheel has a radius of 35 cm.(a) What is the circumference of the wheel? Give your answer correct to 2 decimal places.(b) If the wheel rotates 100 000 times, how far does the car travel? b. A bus travelling in a straight seconds. road covers a distance of 220m in 20 between mass and weight. calculate its velocity 1. The price for a new iPhone today is $829. In 2010 it was $299 for the new iPhone. What is the percent of change in the price of an iPhone from 2010 to today? Quincy has a jewelry business in which he designs and sells bracelets. His daily profit, Q(x), can be modeled by the function Q(x) = 7.25x 36.25, where x is the number of bracelets he sells. What is the value of Q(5), and what is its interpretation? Q(5) = 0; If Quincy sells 0 bracelets, he will earn $5. Q(5) = 0; If Quincy sells 5 bracelets, he will earn $0. Q(5) = 5.69; If Quincy sells 5.69 bracelets, he will earn $5. Q(5) = 5.69; If Quincy sells 5 bracelets, he will earn $5.69. Recently a family from virginia received the keys to their new 3d printed home. The 3d printer that manufactured this home is primarily a ________ innovation. The consumption function is the relationship between consumption expenditure and _____, other things remaining the same. coherent light of frequency is shone through a single slit with a gap width equal to a. an interference pattern is observed on the screen a distance behind the slit. what effect will each of the following alterations have on the width of the central bright spot on the screen? a. decrease the gap width. b. decrease the frequency of the light. c. decrease the distance from the slit to the screen. four reasons why wright says christians must study the historical jesus Simplify.8(10 m)ANSWER CHOICES:80 m18 m810 m80 + m Triangle ABC is translated T(x,y) --> (x + 2, y - 3). What are the coordinates of the image of triangle ABC after this translation? Find the rate of change of each linear function 1. y = x - 7 Judy has a bag with 12 DVDs, 12 marbles, 11 books, and 1 orange. What is the ratio of books to marbles? What is the ratio of DVDs to the total number of items in the bag? What percentage of the items in the bag are DVDs? brianna is working with a u.s. software firm that uses encryption in its products and plans to export their product outside of the united states. what federal government agency has the authority to regulate the export of encryption software? amid their new economic prosperity, the vanitas theme often appeared in which artistic subject that became especially popular among the dutch middle class?