An ideal gas is contained in a cylinder of fixed length and diameter. Eighty joules of heat is added while the piston is held in place. The work done by the gas on the walls of the cylinder is
A. less than 80 J
B. 80J
C. not spesified by the information given.
D. 0J
E. more than 80J

The required moments of the resulting two couples is calculated to be 16.39 Nm.

Forces acting are two 60N forces

A and C are the corners of a 200-mm square plate

The equation for AC is given as(AC forms a hypotenuse, with two similar sides),

AC = √0.2²+0.2² = 0.2√2 m

sin75° = d/AC

d = 0.2√2 sin75° = 0.2732 m

m Fm = Fm × 0.2

m Fm = -30 V₃ 0.2

m Fm = -6 V₃

m Fv = -6 Nm

So, m = 16.39 Nm (clockwise)

Thus, the required moments of the resulting two couples is calculated to be 16.39 Nm.

The given question is incomplete. The complete question is 'Two parallel 60-N forces are applied as shown to the corners A and C of a 200-mm square plate.'

To know more about moments:

https://brainly.com/question/24551104

#SPJ4

If he climbed the ladder in 12.0 seconds, the laborer's power output is 394.875 watts.

Work is the product of force and distance and is measured in Joules (J). In physics, work is the energy transferred to or from object via application of force along a displacement.

As, work = force x distance x cos(theta)

So, the work done by the laborer would be:

work = (895 N + 575 N) x 3.1 m x 1 = 4738.5 J

As, power = work / time

where time is measured in seconds.

power = 4738.5 J / 12.0 s = 394.875 W

So, the laborer's power output is 394.875 watts.

To know more about work done, refer

https://brainly.com/question/25573309

#SPJ1

The vector sum of the electric fields resulting from each of the two charges at point P is the electric field. The field owing to q will point to the right, whereas the field due to -q will point to the left. As a result, the net electric field at point P is zero.

An electric field is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to all other charged particles in the vicinity. It can also refer to a system of charged particles' physical field. The force per unit charge exerted on a positive test charge that is at rest at a given position is the force per unit charge that is used to define the electric field analytically. Electric charge or magnetic fields with variable amplitudes can produce an electric field. The area of space surrounding an electrically charged particle or object in which the charge body perceives force is known as the electric field.

learn more about electric field here:

https://brainly.com/question/8971780

#SPJ4

If a meteorologist says that it will rain with probability p, then he or she will receive a score of -10log(p) and a score of -10log(1-p) if it does not rain.

The scoring system is called the Brier score, which is a commonly used method for evaluating accuracy of probabilistic forecasts. The Brier score ranges from 0 to 1, with score of 0 indicating perfect accuracy and score of 1 indicating total inaccuracy.

If a meteorologist says that it will rain with probability p, then he / she will receive a score of -10log(p) if it does rain. This is because log(p) is a measure of how uncertain the forecast is, and negative sign is used to penalize inaccurate forecasts.

To know more about meteorologists, refer

https://brainly.com/question/13196634

#SPJ4

When a 1200 kilogram safe is 2.1 m above a heavy-duty spring and the rope holding the safe breaks, the spring constant is 199,136 N/m (roughly 200 kN/m). The safe collides with the spring, compressing it by 56 cm.

In physics, an object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a certain velocity. The body retains its kinetic energy after gaining it during acceleration until its speed changes. Kinetic energy is the energy that an item has as a result of its movement. If we wish to accelerate an item, we must apply force to it. Using force demands us to put in effort. After work is completed, energy is transferred to the item, and the thing moves at a new constant speed.

Here,

The spring constant is 200kN/m.

The work done on the spring by the the free falling safe is equal to the kinetic energy of the spring:

W1 =1/2kx²

The work done on the safe by gravity is the potential energy of the spring:

W2 = (mass of safe) x g x (height)

    = 1000kg x 9.8 m/s^2 x (2 + 0.54)m

    =1000kg x 9.8 m/s^2 x (2.54)m

    = 24,892 N-m

W2 = W1 =24892 N-m

W=1/2kx²

Therefore, k = 199136 kN/m.

The spring constant is 199,136 N/m approximately 200 kN/m when a 1200 kg safe is 2.1 m above a heavy-duty spring when the rope holding the safe breaks. the safe hits the spring and compresses it 56 cm.

To know more about kinetic energy,

https://brainly.com/question/26472013

#SPJ4

This experiment undoubtedly brought about the ignition of magnesium metal, which is an exceptionally receptive metal that promptly consumes within the sight of oxygen.

The ash gathered in the crucible is logical to the excess buildup of the magnesium after it has gone through ignition. The bright white fire and smoke are likewise normal for magnesium consumption.

As the metal consumes at a high temperature and produces a bright light. The ash gathered in the crucible is in all probability magnesium oxide, which is a white fine substance.

The weight of the ash(3.5g) is not exactly the underlying load of the magnesium strip (5g), this is because of the deficiency of magnesium as a gas during the burning system.

The contrast between the weight of the ash and the underlying load of the magnesium strip addresses the weight of the magnesium that was lost as a gas during the combustion.

To learn more about Magnesium metal:

https://brainly.com/question/4593305

#SPJ4

We classified each of the following failures by identifying its category in the Figure shown:

Learn more about material failures:

https://brainly.com/question/530489

7#SPJ4

The surfaces should be frictionless . The vector sum of the momenta should be compared, because momentum is a vector quantity.

Define conservation of momentum ?

To learn more about momentum refers to:

https://brainly.com/question/1042017

#SPJ4

The involvement of microphones in the helmet of some professional football players for the purpose of communication shows that there is an immense advancement in technology.

A microphone is defined as a device that is can be used to magnify a sound through its conversation to electrical signals.

Professional football is a type of game that is played by train individuals and it's made up of two teams that plays against each other.

The introduction of microphones in the helmet of these footballer helps them to effectively communicate with their coaches near by which was not soo years back.

Therefore this can be said to be an advancement in technology.

Learn more about microphones here:

https://brainly.com/question/28085245

#SPJ1

The drag coefficient of the car is calculated as equal to 0.0947.

A dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water is called drag coefficient.

60 mph = 26.8 m/s

1 mpg = 0.425144 liters/kilometer

36 mpg = 15.60512 liters/kilometer

4.5 ft * 2.5 ft = 11.25 ft^2 = 1.042 m^2

The drag force can be calculated as:

Fd = 0.5 * Cd * A * r * v^2

where, Cd = drag coefficient (unitless), A = frontal area of the car (m^2), r = air density (kg/m^3), v = velocity of the car (m/s)

So, Fd = (15.60512 liters/kilometer) * 4.5 kg/liter / (3600 sec/hour) = 0.0066 N

Cd = Fd / (0.5 * A * r * v^2)

Cd = 0.0066 N / (0.5 * 1.042 m^2 * 1.2 kg/m^3 * 26.8 m/s^2) = 0.0947

The drag coefficient of the car is 0.0947.

To know more about drag coefficient, refer

https://brainly.com/question/23942493

#SPJ4

Note: The question given on the portal is incomplete. here is the complete question.

Question: A car burns fuel with a density of 700 kg/m3 under atmospheric conditions that produce an air density of 1.2 kg/m3. the car has a fuel rating of 36 mpg (miles per gallon) at a speed of 60 mph (miles per hour) and a frontal cross-section of 4.5 feet by 2.5 feet. 1. calculate the drag coefficient of the car.

Railway tracks or the freeway quantities could be graphed to yield a straight line whose slope could be used to calculate a numerical value for the mass of the cart.

A line's slope is how steeply it slopes from LEFT to RIGHT. The slope of a line is determined by dividing its rise, or vertical change, by its run, or horizontal change. When you know the slope of the line to be investigated and the given point is also the y intercept, you can utilise the slope intercept formula, y = mx + b. (0, b). The y value of the y intercept point is denoted by the symbol b in the formula. According to linguists, the Middle English adverb aslope, which meaning "at an angle," is where the term slope is said to have originated. You can use the word's noun form to describe things that are sloped or at an angle, such as a steep hill or a ramp.

Learn more about the Slope here: https://brainly.com/question/27847091

#SPJ4

The snake takes 0.53 seconds to reach its top speed.

Speed is defined as: The rate of change of the object's position in any direction. Speed ​​is measured as the ratio of distance traveled and time traveled. In physics, an equation of motion is an equation that describes the behavior of a physical system related to motion as a function of time..

We know the snake's initial speed (zero) and its final speed (4.50 m/s). Also, its acceleration is 8.37 m/s2

The relevant equation is:  

v = v0 + at

4.50 = 0 + 8.37t

0.53 s = t

Learn more about Speed

brainly.com/question/13263542

#SPJ4

To calculate the distance first you have to find the angular velocity of the pulley with the formula K.E = 1/2 I ω² using the given value of kinetic energy. Then, also find the potential energy loss of the stone and then the distance.

Since the system here is released from rest, therefore there will be loss in potential energy of the system and gain in its kinetic energy.

Therefore,

Loss in potential energy = gain in (kinetic energy of the pulley + kinetic energy of the stone)

Using the given mass of the pulley disk, find its moment of Inertia.

Inertia (I) = 1/2 mass x radius²

Then, find the angular velocity of the pulley,

K.E = 1/2 I ω²

Finally, find the total kinetic energy of the system by dividing the two fractions of the pulley's kinetic energies .

Learn more about moment of inertia here:

https://brainly.com/question/15246709

#SPJ4

Hence the maximum pressure exerted by the brick is 2450 dyne/cm²

Given the mass of the brick=5kg

Dimension of  the brick=20cm*10cm*2cm.

So weight of the brick= F= mg

Where f= force on the body due to gravity

where m= mass, g= gravity.

So F= 5000*9.8

by doing the multiplication we get the result as

F= 49000 dyne where dyne is unit of force

Where surface area is 10cm*2cm is in contact with the ground then

Area= (10*2)= 20cm²

Applying pressure formula = F/Area= 49000/20

By dividing we get the answer as= 2450 dyne/cm²

When surface area is 20cm*2cm is in contact then

Area= 20cm*2cm= 40cm²

Applying pressure formula = F/Area= 49000/40 dyne/cm²=  1225 dyne/cm²

When the surface area is 20cm*10cm in contact then

Area= 20cm*10cm= 200cm²

By applying the pressure formula= F/Area= 49000/200=245 dyne/cm²

Hence the maximum pressure exerted by the brick is 2450 dyne/cm²

if you want to know more about the pressure then please click on the link

https://brainly.com/question/28012687

The correct answer is 2.77m.

Metal A has a more density(9.50 g/cm³) for the same atomic mass, so it is more likely to have an FCC lattice structure, whereas metal B has a comparatively less density(8.73 g/cm³), so it is more likely to have BCC lattice structure.

A body-centered cubic (bcc) lattice structure has 8 atoms at the corners of a cube and one atom in the center of the cube. This structure has a lower density compared to face-centered cubic (fcc) lattice structure, which has atoms at the corners and the centers of each face of a cube.

According to the given densities, metal A with a density of 9.50 g/cm³ is likely to have an FCC lattice structure, while metal B with a density of 8.73 g/cm³ is likely to have a BCC lattice structure. This is because the FCC structure has a higher density due to the more close-packed arrangement of atoms compared to the bcc structure.

To know more about FCC lattice structure, here

https://brainly.com/question/21327238

#SPJ4

The total mechanical energy of the block-earth system remains constant, and the total mechanical energy of the system containing only the block increases from the moment of release to the moment it hits the ground.

Mechanical energy is energy associated with the motion and position of an object. It is the sum of both the kinetic energy, which is energy associated with the object's motion, and the potential energy, which is energy associated with the object's position. Mechanical energy is present in a variety of forms, including kinetic energy, potential energy, heat, and elastic energy. Mechanical energy is converted into other forms of energy, such as thermal energy, electrical energy, and chemical energy. Mechanical energy can be used to do work, such as turning a crank to lift a heavy object, and can be harnessed to power machines and devices. Mechanical energy is an important concept in physics and engineering, as it can be used to analyze the motion and behavior of objects, and to develop solutions to problems.

To learn more about mechanical energy
https://brainly.com/question/28154924
#SPJ4

Radial direction of the electric field at the center of the circle.

Take into consideration the little equivalent arc elements on either side of the horizontal first. Now determine the electric field they caused, how to fix it, and how to eliminate the ones that were directed in the other direction. Now, swap out the common expression for the electric field caused by charge density, integrate over the arc's length, and you'll get the necessary electric field.

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (also known as an E-field.

It can also refer to a system of charged particles' physical field.  Electric charges and time-varying electric currents are the building blocks of electric fields.

Learn more about Electric field here: https://brainly.com/question/19878202

#SPJ4

a. 12*10^-5 N attractive is the force exerted on one sphere by the other.   b. 9*10^-7 N repulsive is the force between the two after equilibrium is reached, where both spheres have the same charge.

The force between two charged particles is calculated as

F= q1*q2*K/r^2 .......................(i)

where q1 is the charge of the first body, q2 is the charge of the second body and r is the distance between them Here K is a constant that has the values of 9*10^9.

So for the finding a.

12 X 10^-9* -18 X 10^-9*9*10^9/(o.3)^2 ............ From ( i)

9*12*18*10^-9/0.09 which results to 12*10^-5 N

And Similarly for b we need to find the total average charge of both bodies will be.

(q1+q2)/2 ......(ii)    (12 - 18)/2 => -6/2 = -3 nC .................( from ii)

and using (i)    (3X10^-9)^2*9*10^9/ (o.3)^2 ...... (As q1 =q2)

which results in 9*10^-7 N

Learn More about Electric Force:https://brainly.com/question/17692887

#SPJ4

The work required to deflect a linear spring by 20 cm from its rest position with a spring constant of 70 kn/m is 1.4 KJ.

spring constants (physics) A spring property defined as the ratio of the force acting on the spring to the displacement induced by it. Hooke's Law states that as a spring is extended, the force exerted is proportional to the increase in length from the equilibrium length. F represents the force, while x represents the change in spring length. The spring constant is the proportional constant k. It is a measure of the stiffness of the spring. When a spring is stretched or compressed by an amount x from its equilibrium length, it produces a force F = -kx in the direction of its equilibrium position.

Here,

spring constant=70 KN/m

d=0.2 m

W=kx²/2

=70*10^3(0.2²)/2

=1.4 KJ

The work required to deflect a linear spring with a spring constant of 70 kn/m by 20 cm from its rest position is 1.4 KJ.

To know more about spring constant,

https://brainly.com/question/14159361

#SPJ4

The minimum diameter required for the wire is 1.48 m when A steel wire of length 1.93 m with a circular cross-section must stretch no more than 0.240 cm when a tensile (stretching) force of 450 N is applied to each end of the wire.

Given,

wire length, l = 1.93 m

Δl = 0.240 cm = 0.24 x 10⁻² m

F = 450 N

we know that, young's modulus for steel

Y = 2.1 x 10¹¹ N/m²

let the radius of the wire is r

we know that,

Y = Fl/AΔl = (450 x 1.93)/(3.14 x r² x  0.24 x 10⁻²)

r² = 5.486 x 10⁻⁷ m²

or r = 7.4 x 10⁻⁴ m

so diameter of wire is d = 2r = 2 x 7.4 x 10⁻⁴ m

d = 1.48 x 10⁻³ m or d = 1.48 mm

Therefore, the minimum diameter required for the wire is 1.48 m when A steel wire of length 1.93 m with a circular cross-section must stretch no more than 0.240 cm when a tensile (stretching) force of 450 N is applied to each end of the wire.

To read more about young's modulus:

https://brainly.com/question/13257353

#SPJ4

the distance traveld by a body fallling freely from rest in one,two and three seconds are in the range of the object is equal

I came up with this test case myself. If s = '3ab' and t = 'cd', return 1. If s = '123ab' and t = '423cd', return 6.

The study of lexicons is called lexicography, and it is separated into two distinct academic fields. It involves the creation of dictionaries. [1]

The process of compiling, writing, and editing dictionaries is known as practical lexicography.

Theoretical lexicography is the academic study of the semantic, orthographic, syntactic, and paradigmatic characteristics of the lexicon (vocabulary) of a language. It also develops theories of the elements and structures of dictionaries that connect the data in dictionaries, the information needs of users in various contexts, and the most effective ways for users to access the data included in printed and electronic dictionaries. This practise is sometimes known as "metalexicography."

On what defines lexicology as different from lexicography, there is some debate. Some people use the term "lexicology" to refer to theoretical lexicography, whereas others do not.

Learn more about lexicograph here: https://brainly.com/question/27893282

#SPJ4

Answer:

The volume of a gas is inversely proportional to the pressure at constant temperature, according to Boyle's law. Mathematically, it can be expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

As the temperature is constant, we can use the following formula to calculate the new volume of the balloon:

V1 / P1 = V2 / P2

where V1 = 2.00 L, P1 = 101 kPa, P2 = 97.0 kPa.

V2 = (V1 * P2) / P1

V2 = (2.00 L * 97.0 kPa) / 101 kPa = 1.9608 L

So, the new volume of the helium balloon is 1.9608 L.

The altitude of the pole vaulter as she crosses the bar would be 6.1 meter due to energy conservation.

The energy is the first one, but when you jump you're in the air, so you have potential energy due to gravity, and kinetic energy because you're still moving in 1.4 m/s.

Using conservation of energy,

KEi+ PEi = PEf+ KEf

PE = mgh

KE = 0.5mv²

Now, m= 56 kg v= 1.4 m/s

so solving,

h= 6.1 meter

So, The altitude of the pole vaulter as she crosses the bar would be 6.1 meter due to energy conservation.

Learn more about Energy

brainly.com/question/24324075

#SPJ4

The ring has a magnetic field travelling across it because of current I. The magnetic field as the paper goes through the ring is perpendicular to the internal plane, according to the right-hand thumb rule.

In proportion to a drop in the current I flowing from B to A, the magnetic field across the ring and magnetic flux both decrease. According to Lenz's law, the magnetic flux fluctuation is opposed by the current that is induced in the rings. This shows that the magnetic field produced by the induced current and the current I both point in the same general direction. The induced current in the ring is therefore flowing clockwise.

Learn more about magnetic field here

https://brainly.com/question/23096032

#SPJ4

False. Buckingham Pi theorem states that if a physical relationship involves a certain number of independent variables, then the relationship can be written as a product of powers of a certain number of dimensionless groups.

Buckingham Pi theorem is a mathematical theorem that states that any physical system can be expressed as a combination of an appropriate number of variables, together with the appropriate number of independent dimensionless parameters. The theorem was developed by Edward Buckingham in 1914 and is considered to be the most general form of dimensional analysis.

The Froude number does not depend on the independent variables mentioned (velocity, gravitational constant, and length) so Buckingham Pi theorem is not applicable.

To learn more about Buckingham Pi theorem
https://brainly.com/question/1601401
#SPJ4

The greatest height is dictated by the starting vertical velocity. Because higher launch angles have a bigger vertical velocity component, increasing the launch angle increases the maximum height.

The maximum velocity of a fully developed laminar viscous flow through a circular pipe is double the average velocity. The maximum velocity for fully developed laminar flow over parallel plates is equal to (3/2) times the average velocity.

The amount of distance an item travels in a given length of time is measured by its velocity. Here's a word equation that describes the link between distance, velocity, and time: Distance travelled divided by time equals velocity.

Learn more about maximum velocity

https://brainly.com/question/20595261

#SPJ1

-2Mv best describes the impulse object exerts on object during the collision.

In physics, collision, which is also known as impact can be explained as the abrupt, powerful coming together in close proximity of two bodies, such as two pool cues, a golf club and a ball, a hammer.

Accidents can be generally defined as the following: A collision which occurs whenever two vehicles collide violently.

First collision is literally defined as the impact that a car suffers when it hits another object, and second collision is the impact suffered by the occupant, or occupants, of a crashed car, against the impacted car. Given the information on the question, that would be a first collision.

2Mv Mv +Mv +2Mv

2Mv Mv = Mv -2Mv

2(Mv)= Mv

Mv= -2Mv

-2Mv

Learn more about collision here:

brainly.com/question/13138178

#SPJ4

Answer:

25.13274 W (WATT) (Sound Power of the Sound Source)

134.002 dB (Sound Power Level)