An electron has a mass of 9.1x10^-31 kg and a charge
of -1.6x10^-19 C. Suppose you could isolate one electron in
a perfect vacuum and then create an electric field to pull
and edi 107. upward on the electron. How strong would the field have to
be to counteract the electron's weight? (In other words,
di Delfine bu how strong would the field have to be to put the electron in
a state of force equilibrium?)

This question involves the concept of  Newton's law of gravitation.

The force of gravity between the two spaceships is "1355.78 N".

According to Newton's Law of Gravitation:

[tex]F=\frac{Gm_1m_2}{r^2}[/tex]

where,

Therefore,

[tex]F=\frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(500\ kg)(498\ kg)}{(35\ m)^2}\\\\[/tex]

F = 1355.78 N = 1.356 KN

Learn more about Newton's Law of Gravitation here:

https://brainly.com/question/9373839

Two space ships traveling next to each other. The first one is 500 kg and the second one is 498 kg. They are 35 meters apart, the Force of gravity between the two spaceships is 1355.78 N.

It is given that the First spaceship's weight ([tex]m_{1}[/tex]) is 500 kg,

The second spaceship's weight ([tex]\rm m_{2}[/tex]) is 498 kg.

The distance between spaceships (r) is 35 meters.

It is required to find the Force of gravity between these spaceships.

It is defined as the force which attracts any two masses in the universe.

By Newton's law of Gravitation:

[tex]\rm F= \frac{Gm_1m_2}{r^2}[/tex]  , Where

[tex]\rm F = The\ force \ of \ gravity \ between \ the \ spaceships\\\rm G= Universal\ Gravitational \ Constant = 6.67 \times 10^{-11} N.m^2/kg^2[/tex]

Putting values in the above formula:

[tex]\rm F = \frac{(6.67\times 10^{-11} N.m^2/kg^2)(500kg)(498kg)}{(35m)^2}[/tex]

F = 1355.78 N = 1.356  KN

Thus, Two spaceships travel next to each other. The first one is 500 kg and the second one is 498 kg. They are 35 meters apart, the Force of gravity between the two spaceships is 1355.78 N.

Learn more about Gravitational Force here:

https://brainly.com/question/3009841

Answer:

0.98 [sec].

Explanation:

1) the time when the player is moving up equals the time the player falls, it can be 't'. Then

2) the equation of moving down can be written as

[tex]\frac{g*t^2}{2} =h, \ where[/tex]

g=10 [m/s²], t - time, h - the given height.

3) according to the formula above the time spent to moving down is:

[tex]t=\sqrt{\frac{2h}{g}};[/tex]

[tex]t=\sqrt{\frac{2.4}{10}}=\sqrt{0.24} =0.49[s].[/tex]

4) finally, the total time is t*2=0.98[sec].

Answer:

I don't understand your question ❓,the object.....of what experiment

The magnitude of the average force exerted on the ball by the club is 429.27 N.

Force can be defined as the product of mass and acceleration

To calculate the force exerted on the ball by the club, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, The magnitude of the average force exerted on the ball by the club is 429.27 N.

Learn more about force here: https://brainly.com/question/18762601

Answer:

Mass

Explanation:

Gravity is a force (sort of keeping something in place)

A push is force (force pushing something)

Friction is force (force that resists sliding or rolling)

Answer:

1/R = 1/R1 + 1/R2 + 1/R3

1/1 + 1/2 + 1/4 = 1 + .5 + .25 = 1.75

1/1.75 = .572

multiplying this by 100 gives us

R = 57.2 ohms

The smallest resistor (100 ohms) will draw the most current

(One can also use R = R1 R2 R3 / (R1 R2 + R1 R3 + R2 R3)

Hi there!

We can use the following equation to solve for equivalent resistance:

[tex]\frac{1}{R_T} = \frac{1}{R_1} + \frac{1}{R_2} + ... + \frac{1}{R_n}[/tex]

We can plug in the givens and solve.

[tex]\frac{1}{R_T} = \frac{1}{100} + \frac{1}{200} + \frac{1}{400} \\\\\frac{1}{R_T} = 0.175\\\\R_T = \frac{1}{0.175} = \boxed{57.143 \Omega}[/tex]

The resistor that would draw the most current is the 100 Ohm resistor because current chooses the path of LEAST RESISTANCE. This can also be proved mathematically with the following:

For resistors in parallel, the POTENTIAL DIFFERENCE (VOLTAGE) is the same.

Since I = V/R, a smaller 'R' means a larger 'I'. Thus, the smallest resistor would have the greatest current through it.

Answer:

approximately 7 seconds

Explanation:

The given scenario is just an example of Projectile Motion.

In this question, we are given:

- Initial Velocity (u) = 40 m/s

- Angle of Elevation (θ) = 60 degrees

- Distance of Bird (s) = 145 meters        [Not used for the time of flight]

Time of Flight:

[tex]T = \frac{2uSin(\theta)}{g}[/tex]

we will use g = 9.8 m/s/s since we are not told otherwise.
[tex]T = \frac{2(40)Sin(60 degrees)}{9.8}[/tex]

[tex]T = \frac{40\sqrt{3}}{9.8}[/tex]

T = 4.081(√3) seconds
rounded to 7 seconds

Explanation:

Stephen learned that any two objects exert a gravitational force on each other.

If the distance between two objects triples, the gravitational force between

Stephen learned that any two objects exert a gravitational force on each other. If the distance between two objects triples, the gravitational force between them will change by a factor of 9.

The gravitational force is an unobservable force that draws things together. You remain on the ground thanks to Earth's gravity, a gravitational force is a force that also causes objects to fall.

The mathematical expression for the gravitational force is given by

F = G× m₁* m₂ / r ²

As given in the problem statement Stephen learned that any two objects exert a gravitational force on each other. If the distance between two objects triples,

The gravitational force between the objects is inversely proportional to the square of the distance between the object.

Thus, the gravitational force between them changes by a factor of 9.

To learn more about gravitational force here, refer to the link;

https://brainly.com/question/21500344

#SPJ2

Answer:

Weight

Explanation:

The force of gravity on a an object gives the object its weight.

Answer:

0.175 second

Explanation:

i hope it helps

Answer:

Explanation:

500-0.05=499.95

500-100+5=405

100+100=10000

Answer:

Newton

Explanation:

The SI unit for force is the newton.

Answer:

The SI unit of kilogram is Newton. It is denoted by n

By using the right-hand rule for magnetic force to determine the charge on the moving particle, it's a negative charge.

It should be noted that the magnetic force simply means the attraction or repulsion that arises between electrically charged particles.

The right-hand rule for magnetic force states that to determine the direction of the magnetic force, one should point the right thumb in the direction of the velocity.

Learn more about magnetic force on:

https://brainly.com/question/2279150

Answer:

Particle q1 has a charge of 2.7 μC and a velocity of 773 m/s. If it experiences a magnetic force of 5.75 × 10–3 N, what is the strength of the magnetic field?

✔ 2.8

T

In the same magnetic field, particle q2 has a charge of 42.0 μC and a velocity of 1.21 × 103 m/s. What is the magnitude of the magnetic force exerted on particle 2?

✔ 0.12

N

Explanation:

Hope this helps

Answer:

5

Explanation:

Answer:

Environmental means relating to or caused by the surroundings in which someone lives or something exists. It protects against environmental hazards such as wind and sun. The form the human family takes is a response to environmental pressures.

Explanation:

I HOPE IT HELPS!!

THANX!!!

STAY SAFE!!!!

Answer:

B load

Explanation:

definitely not D.

a power source is a battery or a power generator (like at power plants or on good old-fashioned bicycles to have light in the dark).

the fan uses the electrical energy coming from a power source.

if it would be a "propeller" at a wind farm (where power is generated by the wind blowing in between the blades making them turn and as such generating electrical power), then yes, but that is not what the description is telling us.

so, since it is using electrical power to do something, it is a load on the net or circuit or grid.

because it takes out some energy, the actual power generator has to work a little bit harder to maintain the energy level in the grid. just like you have to work harder when you have to carry a bigger weight (or load). hence the name.

the fan will have some conducive material inside (an electrical motor is a structure of coils of wires around magnets, and the power goes through these wires, so they have to be conductive).

and the fan will have a switch, which breaks or establishes the flow of electric energy and therefore determines, if and when the fan is working or not.

Answer:

2.4*10^-17 J

Explanation:

E = V/d = 300 V / 3*10^-3 m = 1.0*10^5 V/m

Voltage at midpoint = E*d = 1.0*10^5 V/m * 1.5*10^-3 m = 150 V

ΔV = 300 V - 150 V = 150 V

Charge of a proton = 1.6*10^-16 C

U = qΔV = (1.6*10^-16 C)(150V) = 2.4*10^-17 J

The electric field strength inside the capacitor is 100,000 V/m, the Potential difference at the midpoint is 150V, and the potential energy of a proton at the midpoint of the capacitor is  2.403 x 10⁻¹⁷J.

A capacitor is an electronic device that stores electrical energy in an electric field between two conducting plates separated by a dielectric material. When a voltage difference is applied across the plates, a charge is stored on each plate, creating an electric field between the plates. The capacitor can then release this stored electrical energy when needed.

The energy stored in a capacitor is given by the formula:

U = [tex]\frac{1}{2}[/tex]CV²

Where

U =the energy stored in the capacitor,

C = the capacitance of the capacitor,

V =the voltage difference across the plates.

Capacitance is a measure of the ability of a capacitor to store charge and is given by the formula:

C = εA/d

Where C = the capacitance,

ε = the permittivity of the dielectric material between the plates,

A = the area of the plates,

d =the distance between the plates.

Here in the question

To calculate the electric field strength inside the capacitor, we can use the formula:

E = V/d

Where E = the electric field strength,

V =the voltage difference between the plates,

d =the distance between the plates.

In this case, the distance between the plates is d=3mm =0.003m,

the voltage difference is between 0V to 300V.

Now, the electric field strength inside the capacitor is:

E = V/d = 300V/0.003m = 100,000 V/m

To calculate the potential energy of a proton at the midpoint of the capacitor, we can use the formula:

U = qV

Where U = the potential energy,

q =the charge of the particle,

V =the voltage difference between the plates.

In this case, we need to know the charge of the proton.

The charge of a proton = +1.602 x 10⁻¹⁹ C.

At the midpoint of the capacitor, the proton will experience a potential difference of 150V (half of the 300V voltage difference).

Now, the potential energy of the proton at the midpoint of the capacitor is:

U = qV = (1.602 x 10⁻¹⁹ C) x (150V) = 2.403 x 10⁻¹⁷J

Therefore, the electric field strength is 100,000 V/m and the potential energy of a proton at the midpoint of the capacitor is 2.403 x 10⁻¹⁷J.

To learn more about capacitors click:

https://brainly.com/question/17176550

#SPJ2

Answer:

D

Explanation:

The accounts receivable would need to be changed to reset the accounts if the future service received cash in advance

(a) The velocity (in m/s) of the rock after 1 second is 11.28 m/s.

(b) The velocity of the rock after 2 seconds is 7.56 m/s.

(c) The time for the block to hit the surface is 4.03.

(d) The velocity of the block at the maximum height is 0.

The velocity of the rock is determined as shown below;

Height of the rock after 1 second; H(t) = 15(1) - 1.86(1)² = 13.14 m

v² = u² - 2gh

where;

v² = (15)² - 2(3.72)(13.14)

v² = 127.23

v = √127.23

v = 11.28 m/s

v = dh/dt

v = 15 - 3.72t

v(2) = 15 - 3.72(2)

v(2) = 7.56 m/s

dh/dt = 0

15 - 3.72t = 0

t = 4.03 s

v = u - gt

v = 15 - 3.72(4.03)

v = 0

Learn more about velocity at maximum height here: https://brainly.com/question/14638187

Answer:

Power, technique, and timing

Explanation:

I took the test, hope it helps, dont forget to rate ⭐⭐⭐⭐

Answer:

A

Explanation:

I took the quiz

Answer:

Explanation:

Because if you don't have strong bones, you will have problems with your health. So, a strong skeletal system is important for leading a healthy life.

Answer: a = 0.647 m/s^2

Explanation:

Acceleration = change in speed / time → a = 22 / 34 → a = .647 m/s^2

An ideal simple machine is one that conserves forces because every input force is useful or not lost to friction and it is considered as a perfect or ideal system.

An ideal machine is a type of machine whose efficiency is 100 percent. This type of machine does not loss heat to friction or does no work against frictional forces.

When energy is not lost to friction, we say that such system is perfect or ideal. Or simply put, such system conserves forces.

In Ideal machine, mechanical advantage is one.

Mechanical advantage = output force / input force

In ideal simple machine, output force = input force

Therefore, ideal simple machine is one that conserves forces because every input force is useful or not lost to friction and it is considered as a perfect or ideal system.

Learn more about ideal machine here: https://brainly.com/question/9932547

For residences, series circuits are impracticable. Parallel circuits are practical because each appliance is controlled by its own switch, which prevents the other appliances from being turned off. A) The appliances are all turned on. The conductor wire is carrying a considerable quantity of current (arrow).

Answer:

It's A: Flute!

It is amount of force or motion that cause the movement or moving of body.

Thus it is well explained.

To learn more about the collisions refer to link ;

https://brainly.com/question/7694106

1.No they do not violate the conservation of law. Because the initial momentum can be zero.

2. The momentum is conserved in both elastic and inelastic collision.

The momentum of the body before the contact is always equal to the momentum of the body after the impact, according to the rule of conservation of momentum.

According to the law of conservation of momentum;

Momentum before collision =Momentum after collision

[tex]\rm m_1u_1 + m_2u_2 = v(m_1 + m_2)[/tex]

1.No they do not violate the conservation of law. Because the initial momentum can be zero.

2. The momentum is conserved in both elastic and inelastic collision. Hence the conservation law works with elastic and inelastic collisions.

3. An elastic collision is one in which kinetic energy is conserved, meaning that the total kinetic energy before and after the impact is the same.

The object bounces once after the body gets struck. When the body's final velocity is zero it follows the stationary object after the collision.

4.. Airbags are meant to inflate automatically in the case of an abrupt deceleration or impact force indicative of a collision.

When the bag is fully inflated, it protects the driver and/or passenger by Increasing cushioning around the driver's neck, head, and spine.

5. Stretchable seatbelts are meant to allow a passenger's considerable velocity to be slowly reduced, preventing the passenger from being flung forward abruptly.

As a result, if the automobile collides, serious casualties can be avoided.

Hence no they do not violate the conservation of law. Because the initial momentum can be zero.

To learn more about the law of conservation of momentum refer;

https://brainly.com/question/1113396

Answer:

Adam (Arabic:, romanized:dam) is said to be the first human person on Earth, as well as the first prophet (Arabic:, nab) of Islam. Muslims see Adam's role as the father of the human race with veneration.

Explanation:

Answer:

Adam is the name given to the first person in Genesis 1-5. Aside from being the name of the first man, Adam is also used as a pronoun in the Bible, both individually as "a human" and collectively as "mankind."

Explanation:

[tex]\text{Weight ,} W = mg = 150 \times 9.8 =1470N[/tex]

Explanation:

f=ma

where force is weight. we know that a is the acceleration of gravity which is -9.8 m/s^2

so f is

-1471.5 N

Answer:

Lithium iodide

Explanation:

it's formula is LiI

Lithium iodide is a chemical compound composed of lithium and iodine, which when exposed to air turns yellow due to the oxidation of iodide to iodine. It has a chemical formula LiI.

The products, lithium iodide (LiI), sodium iodide (NaI), and cesium iodide (CsI) look like typical ionic compounds; they are all white crystalline solids