ake a 40-pf capacitor and charge it to a potential difference of 500 v. then disconnect it from the battery and connect its terminals to those of an uncharged 10-pf capacitor. what are: (a) the

option c is the correct answer

What is Spectroscopy ?

It is a common method used by astronomers to determine the composition of stars, planets, and other objects. Today, this process uses instruments with gratings that distribute the light from the object by wavelength. This spread of light is called the spectrum.

The science of spectroscopy is very difficult. From the spectral lines, astronomers can not only determine the element, but also the temperature and density of this element within the star. The spectral lines also tell us about each of the star's magnetic fields. The width of the line tells us how fast the matter is moving.

To learn more about the Spectroscopy from the link ;

https://brainly.in/question/1135370

#SPJ4

The freight train has a momentum of mv = (4.5 × 105 kg)(1.4 m/s) = 6.3 ×105 kg-m/s.

An automobile with a mass of 1800 kg would need to go at a speed of 6.3  × 105 kg-m/s ÷ 1800 kg = 350 m/s in order to have a momentum of the same magnitude. (Roughly 800 mph)

A moving body's amount of motion is referred to as momentum. It has units of kg m/s and is theoretically represented as p = m * v.

The momentum equation connects the total force exerted on a fluid element to its acceleration or rate of change of momentum and is a formulation of Newton's Second Law. You're certainly familiar with the formula F = ma, which links applied force and acceleration in solid mechanics analysis.

Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction. According to Isaac Newton's second equation of motion, the force applied on a particle is equal to the time rate of change of momentum.

Learn more about momentum here:

https://brainly.com/question/1042017

#SPJ1

Answer:

The answer is 61.45 °C

Explanation:

Clausius-Clapeyron equation:

P2= Normal pressure

T2= Normal boiling point

ln(p2/p1)=−(ΔHv/R)*(1/T2 − 1/T1)

ln(760/190) = –(31400/8.314)*[(1/T2) – (1/298)]

T2 = 334.6 K = 61.45 °C

Learn more about the boiling point of chloroform here: https://brainly.com/question/13538618

#SPJ4

The angle of a vector with x and y component of 3 and 4 respectively is 53.13°

Vectors are quantities that have both magnitude and direction

To calculate the angle of the vector, we use the formula below.

Formula:

Where:

Substitute these values into equation 1

Hence, the angle of the vector is 53.13°.

Learn more about vector here: https://brainly.com/question/25705666

#SPJ1

Gravitational potential energy is converted to kinetic (Motion) energy when the object begins to move.

The energy gained from this change in position is stored within the body as gravitational potential energy if a ball is raised from the ground to a height above the earth. The gravitational potential energy is then converted into kinetic energy when the ball hits the earth.

Therefore, the way an object falls, its gravitational potential energy is said to be transformed or altered  into the kinetic energy of motion.

Learn more about Gravitational potential energy from

https://brainly.com/question/15896499
#SPJ1

Due to air friction different mass configurations show the same physics of  non-conservation.

Momentum in an easy way is an amount of motion. right here quantity is measurable because if an item is transferring and has mass, then it has momentum. If an item no longer passes then it has no momentum. but, in normal lifestyles, it has significance but many humans did not understand it.

Momentum may be described as "mass in motion. All items have mass; so if an item is transferring, then it has momentum - it has its mass in motion. the quantity of momentum that an item has relies upon two variables.

Learn more about momentum here:-https://brainly.com/question/402617

#SPJ4

The magnitude[tex]F_{P}[/tex]  of the force you need to exert on the crate to make it continue to slide along the floor with constant velocity is  437.5N.

The Normal Force (in a horizontal plane, it is comparable to the mass by gravity) and the Kinetic Coefficient of Friction must be multiplied in order to obtain the Friction Force, which must be used in order to solve this problem.

Given that the sentence does not specify the value of the coefficient of friction, I will ascribe a value of 0.5 between the crate and the ground. If a different value has been specified for this coefficient, the below equation will simply need to be changed to reflect it.

[tex]F_{P}[/tex] = µK N

µK = Friction coefficient

Normal Force is N.

Replacing,

[tex]F_{P}[/tex] = 0.5 × 875

[tex]F_{P}[/tex] = 437.5N.

Consequently, the crate is subject to a friction force of 437.5N.

To know more about friction force visit:

https://brainly.com/question/1714663

#SPJ4

Complete question is "Suppose you have to move a heavy crate of weight 875 {\rm N} by sliding it along a horizontal concrete floor. You push the crate to the right with a horizontal force of magnitude 300 {\rm N}, but friction prevents the crate from sliding. Now assume that the crate is sliding along the floor with constant velocity. What is the magnitude F_p of the force you need to exert on the crate to make it continue to slide along the floor with constant velocity?"

A car is driving with a constant velocity around a circular track. The track’s radius is 156.1 m, and the car returns to its starting position in

49.3 s the car’s centripetal acceleration is 0.327 m/sec².

Rate of change of velocity with respect to time is called acceleration.

when the magnitude of velocity is constant and direction is changing

than the acceleration is centripetal acceleration.  

Given that is question radius of track  is 156.1 m and  car returns to its starting position in 49.3 s.

Velocity of car = Circumference of Circle / total time

                        = 352.308/ 49.30

                 v     = 7.14 m/sec

Centripetal acceleration = v²/r

                                         = 51.06/156.1

                                         = 0.327 m/sec²

The car’s centripetal acceleration is  0.327 m/sec².

To learn more about acceleration refer to the link:

brainly.com/question/12550364

 #SPJ1

The combination of the graphs that shows a free fall are A and C.

We know that motion has to do with the change of position with time. When an object is falling freely, the velocity of the object would remain constant because the velocity or the speed does not change.

Recall that when we throw objects down from a height, the objects would fall at the same rate irrespective of the masses of the objects. This can be understood to mean that the acceleration that acts on the objects is the same and does not change.

However, the distance that is covered by the object does change with tome and this can be seen from the graph as we have in the question. We can now see that the graph that has a flat speed time graph and a straight distance time graph can describe on object that is undergoing free fall.

Learn more about free fall:https://brainly.com/question/13299152

#SPJ1

The Angular velocity is 54.55 rad/s

What is angular velocity?
The rate at which an angle between two bodies changes is known as angular velocity. Something changes when an object rotates or revolves around an axis. This displacement is depicted in the image by the angle formed by a line on just one body and a line on the other. Technical terms like degrees, 360-degree revolutions, as well as revolutions per minute have been frequently used to describe angles or angular displacements (rpm). Angles and angular velocities are typically expressed in radians as well as radians per second, respectively, in mathematics and physics.

These conversion factors link these measurements together:
A radian equals 1/180 (or 0.0175) of a degree, and a radian per second = 1/30 (or 0.105) of a radian.
Angular velocity W= U/r
Given V= 30m/s ; r=0.55mW=3/0.55 = 54.55 rad/s

Hence the answer is 54.55 rad/s

To learn more about angular velocity, click
https://brainly.com/question/20432894
#SPJ4

The centre of gravity, in physics, is an imaginary point in a body of matter where for convenience in certain calculations,

Sources of errors for the center of gravity of an irregularly shaped object: -environmental error: when the wind blows it may remove the irregularly shaped object from equilibrium. add: density variations, shape variations say, thickness], inability to measure precisely, inability to compute precisely. For example, as a result of a number of the center of gravity measurements, we may have the best estimate of the true value for the acceleration due to gravity, the center of gravity is the point between which the force of gravity move on a thing or system. In most mechanics problems the gravitational pasture is assumed to be constant. The center of gravity is then in entirely the same position as the center of mass.

So we can conclude that It is important to know the center of gravity because it predicts the behavior of a moving body when acted on by gravity.

Learn more about its center of gravity here: https://brainly.com/question/24553858

#SPJ1

The bond angle of the molecule to the nearest degree is 120 degrees.

According to the valence shell electron pair repulsion theory (VSEPR). We know that the bond angle that an atom has with its neighbors which also call the dihedral angle of the compound is affected by the number of atoms that surround the central atom in the molecule.

Let us recall that when we have two atoms that surround the central atom then we are going to have a three atom compound which has a trigonal planar geometry and has a bond angle of 120 degrees.

Learn more about VSEPR theory:https://brainly.com/question/14992767

#SPJ1

Three solid, uniform, cylindrical flywheels with a radius of 1.47 m and a mass of 65.0 kg each rotate. The system's net angular momentum is 297.77 298 kg m2 / s in size.

I is the moment of inertia.

W = angular momentum L = angular velocity

I = 1/2 MR^2

I = 1/2 (65)(1.47^2)

I = 70.23

Moment of Inertia times Angular Velocity equals L.

In the same direction, two of the fly wheels turn.

L = 2I(W1) - I(W2) (W2)

L = 2*70.23(3.83) - 70.23(3.42) (3.42)

L = 297.77 ≈ 298 kg m^2 / s

Learn more about Angular Momentum here:

https://brainly.com/question/15104254

#SPJ4

The correct answer is option A.

The rocky inner planets are different than the gaseous outer planets because heat from the growing sun allowed rock to mainly form close in.

In our solar system, the inner planets are rocky while the outer planets are in a gaseous state.

Rocky planets are also called terrestrial planets as their outer surface is solid and composed of rocks and metal.

They have large thick gaseous atmospheres which are abundant in gases such as nitrogen, carbon dioxide, and oxygen.

While the outer planets are giant balls of gases that orbit around the sun.

Unlike terrestrial planets, these gaseous planets do not have thick atmospheres and are 2x larger in size than the rocky inner planets.

If you need to learn more about gaseous outer planets click here:

https://brainly.com/question/17304329

#SPJ4

At the summit of the mountain, the mass is 60.18 kg, the weight is 600 N, and the mass is unaltered.

Let the mass on earth be m.

As we know:

Now, calculate as follows:

Therefore, at the summit of the mountain, the mass is 60.18 kg, the weight is 600 N, and the mass is unaltered.

To know more about weight and mass, refer to:

brainly.com/question/86444

#SPJ4

​

Satellite B's radius will be less than Satellite A's radius.

m = Satellite Mass

v = Satellite Velocity

r = Orbital radius of the satellite

Relating the gravitational and centripetal forces

mv^2/ r= GmM/r^2

v^2/r=GM/r^2

v^2=GM/r

v = sqrtGM/r

As can be shown, the mass of the satellite has no bearing on the relationship between velocity and radius.

This implies that the radius must shrink for v to increase

Here, vb>va

Therefore, satellite b's radius will be smaller than satellite a's radius.

To know more about the satellite visit here :

https://brainly.com/question/13751074

#SPJ4

Answer:

a. their total displacement = 364 meters

b. their average speed      = 33.5 meters/minute

c. their average velocity    =  26 meters/minute SW

Explanation:

See attached worksheet

The hydrostatic pressure on the bottom of the tank is 197.083 kN.

Given,

Length of tank = 10 m

Width of tank = 8 m

height of tank = 4 m

density of kerosene = 820 kg/m³

depth of oil = 3.5 m

A. Hydrostatic pressure at the underside of the tank:

P = ρ g h

P = 820 x 9.81 x 3.5

P = 28154.7 Pa

B. Hydrostatic force at the underside of the tank:

F = P A

⇒A  = 10 x 8 = 80 meter²

⇒F = 28154.7 x 80

    = 2252.38 kN

C. Hydrostatic force at one edge:

Given,

Width = 8 m

depth = z

A = 4 y

dA = 4 dy

P = ρgh

P = ρgz = ρg(y-0.5)

F = P dA

F = ρg(y-0.5)(4dA)

F = 24.5 ρg

Hydrostatic force at one end = 24.5 x 820 x 9.81 = 197.083 kN.

The pressure exerted by a liquid thanks to gravity at any point in equilibrium. Hydrostatic pressure is proportional to the depth measured from the surface because the weight of the liquid increases when a downward force is applied. Hydrostatic pressure is the force produced by still or still water. this is often the constant force that water pressure exerts on underground walls.

Learn more about Hydrostatic pressure here:-https://brainly.com/question/28206120

#SPJ4

The horizontal force required for an acceleration of 2.0 m/s² is equal to 54.3 N.

The force of kinetic friction is a type of frictions that acts on a moving object on a surface. In order to calculate the force of kinetic friction, we use the formula F = μN where F is the force of kinetic friction, μ is the coefficient of the kinetic friction, and N is the normal force. However, we need to take into account the force along the x-axis. Therefore, the formula ∑F = μN + ma will help us find the horizontal force.

Let ∑F represent the net force, N represent the normal force, m represent the mass of the box, g represent the acceleration of gravity, µ represent the kinetic friction, and a represent an acceleration of 2 m/s².

∑F = µN + ma

∑F = µmg + ma

∑F = m (µg + a)

∑F = 10 kg (0.35 × 9.8 m/s² + 2 m/s²)

∑F = 10 kg (3.43 m/s² + 2 m/s²)

∑F = 10 kg (5.43 m/s²)

∑F = 54.3 kg × m/s²

∑F = 54.3 N

The net force is equal to 54.3 N. That is the horizontal force required!

Learn more about friction here: https://brainly.com/question/24338873

#SPJ4

24.46 m/s is the speed of the arrow after passing through the target.

p=mv

Conservation of momentum: m1v1=m2v2

The target has a mometum of -(.3kg)(2.15m/s)

the arrow has a mometum of (.0225kg)(42.0m/s)

After impact the mometum of the target is 0 Ns since its velocity is zero.

After impact the velocity of the arrow can be determined with conservation of momentum calculations.

Δp(arrow)=-Δp(target)

m(arrow)v(arrow)i+m(target)v(target)i=m(arrow)v(arrow)f+m(target)v(target)f

(.0225kg)(42.0m/s)-(.3kg)(2.15m/s)=(.0225kg)vf(arrow)

the final velocity of the arrow should be equal to((.0225kg*42.0m/s)-(.3kg*2.15m/s))/.0225kg

v(arrow) final = 24.46 m/s

       m  is the mass of a body and v is the velocity  of that body, the impulse momentum  can be expressed as  p=m.v

To learn more about momentum, refer;

https://brainly.com/question/24030570

#SPJ4

Constellation is a group of stars that appears to form a pattern or picture. Some of the constellations include Orion, Taurus, Canis Major etc.

Orion is located on the celestial equator and it can be seen throughout the world. This constellation is named after the hunter, in Greek mythology. It is one of the most obvious and recognizable constellations in the sky. Orion is most visible in the evening sky from January to April, during winter season in the Northern Hemisphere, and summer season in the Southern Hemisphere. In the tropics, the constellation moves at the zenith. Orion is bordered by Taurus to the northwest, and by other constellations in other directions.

Taurus is one of the constellations of the 12 zodiac signs. It is a large and prominent constellation in the Northern Hemisphere during winter. It is one of the oldest constellations. The International Astronomical Union gave a three-letter abbreviation for the constellation, as "Tau". During late November-early December, Taurus occupies a furthest point from the Sun and is visible the entire night. By late March, it sets at sunset and completely disappears behind the Sun's glare from May to July.

Canis Major is a constellation in the southern celestial hemisphere. It is a Latin name, which means 'greater dog' in contrast to 'Canis Minor' meaning 'lesser dog'. These both figures are commonly represented as following the constellation of Orion, the hunter, through the sky. Canis Major contains Sirius, the brightest star in the night sky, known as the "dog star". It is bright because of its proximity to the Solar System.

Learn more about Constellation here,  https://brainly.com/question/13166871.

#SPJ1

The speed of ball #2 after the collision will be 4.5 m/s.

Given,

The mass of ball 1 = 6kg

The mass of ball 2 = 4 kg

Initial speed of ball 1 = 5 m/s

Final speed of ball 1 = 2 m/s

Initial speed of ball 2 = 0 m/s

Let us suppose the final speed of ball 2 is x m/s.

We know that, from the conservation of momentum theorem:

m1.v1(initial) + m2.v2(initial) = m1.v1(final) + m2.v2(final)

6.5 + 4.0 = 6.2 + 4.x

30 + 0 = 12 + 4x

=>4x = 18

=> x = 4.5 m/s

Thus the speed of 2nd ball after the collision will be 4.5 m/s.

Learn more about the conservation of momentum at

https://brainly.com/question/7538238

The correct answer is option c, speed.

Speed is the rate at which someone or something moves or operate. It is measured by the velocity and time.

Velocity is the total distance in total time taken.

Speed tells the amount of energy absorbed by the vehicle. The energy is used in the movement of the vehicle and it also helps the vehicle to move accordingly.

Speed is the major factor that helps to protect the occupants.

It is speed only that we can adjust a according to the situation. This also keeps the vehicle in control. It is the main factor in any vehicle that causes the vehicle to move and also it helps to keep it in control as well. Other controls are the supporting factors that helps to keep the speed in control.

Be it the weather, the climate, roads or traffic, it is speed that helps to keep the occupants safe.

Therefore, Speed  is a major factor in dictating how much energy the vehicle can absorb to protect the occupants

To know more about speed, refer : https://brainly.com/question/8005420

#SPJ1

The main difference between the energy of moving water and the energy of stored water is that the energy of moving water has kinetic energy whereas the energy of water that is stored has potential energy.

Potential energy is defined as the stored energy in any object due to its position while on the other hand, while Kinetic energy is defined as the energy an object has due to its motion. The energy stored in the water molecules which is used for the movement of these molecules is called water potential. Stored water has potential energy but the kinetic energy is present only in the moving molecules of water.

So we can conclude that moving water has kinetic energy while on the other hand, the energy of water that is stored has potential energy.

Learn more about energy here: https://brainly.com/question/13881533

#SPJ1

The amount of thermal energy inside a protostar increases with time, We will degree radiative power without delay and infer thermal energy from models: type will we infer from the law of conservation of energy

A protostar is a very younger big name that is nonetheless accumulating mass from its parent molecular cloud. The protostellar phase is the earliest one within the system of stellar evolution. for a low-mass superstar, it lasts about 500,000 years.

A protostar is formed as gravity starts offevolved to pull the gases collectively into a ball. This technique is referred to as accretion. As gravity pulls the gasses toward the center of the ball, gravitational strength begins to warmness them, inflicting the gasses to emit radiation. in the beginning, the radiation simply escapes into space.

Protostar is an early degree in the evolution of a celebrity that generally grows to the factor of beginning nuclear fusion and becoming a star through gathering mass. it's miles made from a contracting cloud of bloodless and dark interstellar medium (often hydrogen gas).

Learn more about protostar here:

https://brainly.com/question/7849717

#SPJ4

The magnitude of the force is equal to 100 newtons.

It's easy! You just need to divide the work by the displacement:

300 = F · 3

300 = 3F

300/3 = 3F/3

100 = F

F = 100

Here, F is the magnitude of force. The standard unit for force is newton (N). Recall that in physics, work is mathematically defined as W = F · x where W is work, F is force, and x is displacement. The standard unit for work is joule (J) and the standard unit for displacement is meter (m).

You are given that the work applied is equal to 300 joules and the displacement is equal to 3 meters. The force used to punch a box along the floor would then be 100 newtons.

Learn more about the definition of work in physics here: https://brainly.com/question/14813637

#SPJ4

The net force acting on: 2.113 x 10⁵ N.

First, we need to calculate the deceleration of the driver by using 3rd equation of motion:  2as = Vf² - Vi²

where,

a = deceleration = ?

s = distance = 5 cm = 0.05 m

Vf = Final Velocity = 0 m/s

Vi = Initial Velocity = 18 m/s

Therefore,

2a(0.05 m) = (0 m/s)² - (18 m/s)²

a = (- 324 m²/s²)/0.1 m

a = - 3240 m/s²

where the negative sign represents a deceleration

From Newton's Second Law of Motion:

F = ma

F = (65 kg)(-3240 m/s²)

F = - 2.106 x 10⁵ N

So, the closest answer is:

F = 2.113 x 10⁵ N

In physics, a force is an effect that can change the motion of an object. A force can cause an object with mass to change speed, ie. accelerate A force can also be intuitively described  as a push or a pull. A force has both magnitude and direction, so it is a vector quantity.

When a body tends to change or change its state under the influence of an external cause, it is called a force. A body can also change its shape, size and direction when a force is applied. For example, kicking a ball, pulling and pushing a door.

To learn more about force, visit;

https://brainly.com/question/13014979

#SPJ4

Answer:

a) Uniform rectilinear motion

b) 600 m

c) 20 m/s

Explanation:

a) average velocity is described as the change of position divided by the time of travel, so v= ∆x/∆t. This is a linear function (y = mx+ q) which is the same structure of the equation needed to calculate average velocity (x2= x1 + vt). If you do the ratio between a distance and the corresponding time you'll see that the average velocity is the same, which is typical of this kind of motion.

b) At the the time of 30 seconds the corresponding distance on the y axis is 600 m.

c) Again, v=∆x/∆t and we can rewrite is as v=x2-x1/t. If you take the same data we've used before you can write v= 600m-0/ 30s= 20 m/s. The average velocity is 20 m/s.

The magnitude of the induced emf in the loop is 1mV.

The formula to be used is:

E = B (dA/dt)

B = magnetic of magnetic field parallel to the axis of loop = 0.5 T

dA/dt = rate of change of area of the loop = 20 cm²/s = 20 x 10⁻⁴ m²

θ = Angle of the magnetic field with the area vector = 0

E = emf induced in the loop

Now, plugging in the values we get:

E = B (dA/dt)

E = (0.5) (20 x 10⁻⁴ )

E = 10 x [tex]10^{-4}[/tex] volts

E = 1 mV

Therefore,  the magnitude of the induced emf in the loop is 1mV.

Learn more about emf induced in the loop here:

https://brainly.com/question/16764848

#SPJ4

Answer:

b

Explanation:

For C scale  , water freezes at 0 and boils at 100 C