account for the difference in behavior of h2c2o4 and (nh4)2c2o4

One of the best techniques to separate a mixture of two amino acids, glycine and alanine, is chromatography. Chromatography is a versatile separation method commonly used in chemistry and biochemistry to separate and analyze mixtures.

Chromatography is a versatile separation technique used in various scientific fields to separate and analyze complex mixtures of substances. It is based on the principle of differential migration of components in a sample mixture through a stationary phase and a mobile phase. The stationary phase can be a solid or a liquid, while the mobile phase is typically a liquid or a gas.

During chromatographic analysis, the sample mixture is introduced into the system, and the different components interact differently with the stationary and mobile phases. This leads to their separation as they travel at different rates through the system. The separated components are then detected and analyzed. Chromatography finds applications in a wide range of disciplines such as chemistry, biochemistry, pharmaceuticals, forensics, environmental science, and more.

To know more about Chromatography refer to-

brainly.com/question/28731153

#SPJ4

The mole ratio of nitrogen gas, N₂ and water, H₂O in the given chemical equation is 5 : 6

Mole ratio of elements in a chemical equation is simply the ratio of the coefficients of the elements in the balanced equation.

With the above information, we shall obtain the mole ratio of N₂ and H₂O. This is illustrated below:

4NH₃ + 6NO -> 5N₂ + 6H₂O

From the balanced equation,

Mole ratio of N₂ and H₂O = Coefficient of N₂ / Coefficient of H₂O

Mole ratio of N₂ and H₂O = 5 / 6

Mole ratio of N₂ and H₂O = 5 : 6

Thus, from the above, we can conclude that the mole ratio of N₂ and H₂O is 5 : 6

Learn more about mole ratio:

https://brainly.com/question/32038571

#SPJ1

The correct answer is (d). acetic acid.

In terms of oxidation states, acetaldehyde ([tex]CH_3CHO[/tex]) has a carbon atom bonded to an oxygen atom, giving the carbon a +1 oxidation state. Acetic acid  ([tex]CH_3CHO[/tex]) , on the other hand, has two oxygen atoms bonded to the carbon, resulting in a +2 oxidation state for the carbon. Therefore, acetic acid is more highly oxidized than acetaldehyde.

Let's examine the other options:

a. ethylene gas ([tex]C_2H_4[/tex]) has a carbon-carbon double bond and no oxygen atoms, so it is less oxidized than acetaldehyde.

b. ethanol ([tex]C_2H_5OH[/tex]) has an oxygen atom bonded to one of the carbon atoms, resulting in a +1 oxidation state for the carbon. It is the same level of oxidation as acetaldehyde.

c. ethane ([tex]C_2H_6[/tex]) has no oxygen atoms, so it is less oxidized than acetaldehyde.

e. ethylene ([tex]C_2H_4[/tex]) is the same as option a and is less oxidized than acetaldehyde.

To know more about acetic refer here

https://brainly.com/question/15202177#

#SPJ11

The correct option is C, The phrase that describes the molecular polarity and distribution of charge in a molecule of carbon dioxide, CO2, is nonpolar and symmetrical.

A molecule is the smallest unit of a chemical compound that retains the chemical properties of that compound. It consists of two or more atoms held together by chemical bonds. Atoms, which are the basic building blocks of matter, combine to form molecules through various types of bonding, such as covalent, ionic, or metallic bonds. Molecules can be composed of atoms of the same element (as in diatomic molecules like oxygen gas, [tex]O_2[/tex]) or different elements (as in water, [tex]H_2O[/tex], composed of hydrogen and oxygen atoms).

The arrangement and types of atoms in a molecule determine its chemical behavior and properties. Molecules can exist in different states of matter, including solid, liquid, and gas, depending on the strength of the intermolecular forces between the molecules.

To know more about Molecule refer to-

brainly.com/question/30465503

#SPJ4

Complete  Question:

Which phrase describes the molecular polarity and distribution of charge in a molecule of carbon dioxide, CO2?

A) polar and symmetrical

B) polar and asymmetrical

C) nonpolar and symmetrical

D) nonpolar and asymmetrical

The alkyl groups that make up the given ether are ethyl and benzyl. The answer is C)

In the given ether, the molecular structure consists of two alkyl groups attached to an oxygen atom. By analyzing the options provided, we can determine that the alkyl groups present in the ether are ethyl (C₂H₅) and benzyl (C₆H₅CH₂-).

The ethyl group is represented by the C₂H₅ formula, indicating a two-carbon chain with three hydrogen atoms. The benzyl group is represented by C₆H₅CH₂-, which consists of a phenyl ring (C₆H₅) attached to a methylene group (CH₂-). Therefore, the correct answer is option C) ethyl and benzyl.

Hence, the correct option is: C) ethyl and benzyl.

The complete question is:

What alkyl groups make up the following ether?
(image attached)

A) ethyl and phenyl

B) propyl and benzyl

C) ethyl and benzyl

D) propyl and phenyl

E) None of these

To know more about alkyl groups, refer here:
https://brainly.com/question/9872968
#SPJ11

The place where tectonic plates interact is known as a plate boundary.

Tectonic plates are large, rigid slabs of Earth's lithosphere that float on the semi-fluid asthenosphere beneath them. There are three main types of plate boundaries: divergent boundaries, where plates move apart; convergent boundaries, where plates collide; and transform boundaries, where plates slide past each other horizontally.

At divergent boundaries, such as the Mid-Atlantic Ridge, new crust is formed as magma rises and solidifies, creating underwater mountain ranges and rift valleys.

Convergent boundaries, like the collision between the Indian and Eurasian plates forming the Himalayas, involve the destruction, subduction, or deformation of crustal material. This leads to the formation of mountain ranges, volcanic activity, and earthquakes.

Transform boundaries, such as the San Andreas Fault in California, involve lateral sliding of plates. These boundaries are characterized by frequent earthquakes but typically lack significant volcanic activity.

Plate boundaries are dynamic zones where the Earth's lithosphere is constantly reshaped, and the interactions between tectonic plates give rise to a variety of geologic phenomena.

For more such questions on tectonic

https://brainly.com/question/2325633

#SPJ11

The term used to describe reagents such as NaBH4 which only react with certain functional groups is "chemoselective." Chemoselectivity refers to the ability of a reagent to selectively react with one functional group or a specific type of bond in the presence of other functional groups or bonds.

In the case of NaBH4, it is commonly used as a reducing agent and exhibits chemoselectivity by selectively reducing carbonyl groups (aldehydes and ketones) while leaving other functional groups untouched.

While "functional group selective" is also a valid term, "chemoselective" is more commonly used to describe reagents with this property. The terms "stereoselective" and "regioselective" refer to the selectivity of a reaction based on the stereochemistry or the position of the reaction site, respectively, and are not specific to reactions targeting certain functional groups.

Learn more about NaBH4here:

https://brainly.com/question/31560146

#SPJ11  

The equilibrium constant (K) for the given reaction at 25°C is approximately 5.18 × 10^(-31).

To calculate the equilibrium constant (K) for the given reaction at 25°C, we can use the relationship between the standard Gibbs free energy change (ΔG°) and the equilibrium constant.

The standard Gibbs free energy change (ΔG°) is related to the equilibrium constant (K) through the equation:

ΔG° = -RT ln(K)

Where:

ΔG° is the standard Gibbs free energy change (in J/mol)

R is the gas constant (8.314 J/(mol·K))

T is the temperature in Kelvin

K is the equilibrium constant

First, we need to convert the given value of ΔG° from kJ/mol to J/mol:

ΔG° = 163.4 kJ/mol = 163.4 × 10^3 J/mol

Now we can substitute the values into the equation and solve for K:

163.4 × 10^3 J/mol = - (8.314 J/(mol·K)) * (25 + 273) K * ln(K)

Simplifying the equation:

163.4 × 10^3 J/mol = - (8.314 J/(mol·K)) * (298 K) * ln(K)

Dividing both sides of the equation by - (8.314 J/(mol·K)) * (298 K):

ln(K) = (163.4 × 10^3 J/mol) / - (8.314 J/(mol·K)) / (298 K)

ln(K) ≈ - 69.93

Taking the exponential of both sides to solve for K:

K ≈ e^(-69.93)

K ≈ 5.18 × 10^(-31)

Therefore, the equilibrium constant (K) for the given reaction at 25°C is approximately 5.18 × 10^(-31).

Learn more about equilibrium constant here:

https://brainly.com/question/30620209

#SPJ11

A reaction a 2b → c is found to be first order in a and first order in b. t, k, if the rate is expressed in units of moles per liter per minute he units of the rate constant are [tex]moles^-1 per liter^-1.[/tex]

In the given reaction, a 2b → c, it is stated that the reaction is first order in both reactant A and reactant B. This means that the rate of the reaction is directly proportional to the concentration of both A and B raised to the power of 1. Mathematically, the rate equation can be expressed as:

rate = k[A][B]

Where [A] and [B] represent the concentrations of A and B, respectively, and k is themoles^-1  per liter^-1.

To determine the units of the rate constant, we can analyze the units of the rate equation. Since the rate is expressed in moles per liter per minute, the units of the rate constant, k, can be derived as follows:

Rate = k[A][B]

Units of rate = (units of k) * (units of [A]) * (units of [B])

Moles per liter per minute = (units of k) * (moles per liter) * (moles per liter)

By comparing the units, we can deduce that:

Units of k = moles per liter per minute / (moles per liter)²

Simplifying further:

Units of k = 1 / (moles per liter)

Therefore, the units of the rate constant, k, in this reaction are [tex]moles^-1 per liter^-1.[/tex]

Learn more about rate of the reaction here:

https://brainly.com/question/13693578

#SPJ11

The reagents that can oxidize zinc (Zn) to Zn^2+ but not silver (Ag) to Ag^2+ are those with higher reduction potentials than zinc but lower reduction potentials than silver.

Reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction.

Out of the options given, the reagents that fit these criteria are:

a. Co^2+ (cobalt(II) ions)

e. Br (bromine)

Both cobalt(II) ions (Co^2+) and bromine (Br) have higher reduction potentials than zinc (Zn), so they can oxidize zinc to zinc(II) ions (Zn^2+).

However, their reduction potentials are lower than that of silver (Ag), so

they cannot oxidize silver to silver(II) ions (Ag^2+).

Therefore, the correct options are a. Co^2+ and e. Br.

To know more about oxidize zinc  refer here

brainly.com/question/30713426#

#SPJ11

An equilibrium constant expression is a mathematical representation of the equilibrium between reactants and products in a chemical reaction. The correct answer would be A, D, and F.

An equilibrium constant expression is a mathematical representation of the equilibrium between reactants and products in a chemical reaction. It is written using the concentrations of the reactants and products at equilibrium. The equilibrium constant expression includes only the species that are present in the reaction mixture in the gaseous or aqueous state. Therefore, the terms that would be included in an equilibrium constant expression are N2(g), NH3(g), and H2O(g). NaCI(s) and H2O(s) are solids and are not included in the expression as their concentrations do not change during the reaction. H20( is not a species and cannot be included in the equilibrium constant expression. Therefore, the correct answer would be A, D, and F. It is important to note that the equilibrium constant expression may differ depending on the chemical reaction and the specific conditions of the reaction.

To know more about equilibrium constant expression visit: https://brainly.com/question/29748652

#SPJ11

Triethylamine [(CH3CH2)3N] is a molecule in which the nitrogen atom is sp3 hybridized and the CNC bond angle is approximately 109.5 degrees. This means that the nitrogen atom has four electron groups around it, including three carbon atoms and one lone pair of electrons.

Triethylamine is a commonly used organic compound that is often employed as a base or catalyst in organic reactions. Its sp3 hybridization and tetrahedral geometry make it an effective nucleophile and basic site, which allows it to react with a wide range of electrophiles. The CNC bond angle of approximately 109.5 degrees is close to the ideal tetrahedral angle of 109.47 degrees, which suggests that the molecule has minimal steric strain. This angle is also characteristic of other tetrahedral molecules with four electron groups around the central atom.

The sp3 hybridization of the nitrogen atom in triethylamine is a result of its electron configuration, which has five valence electrons in the 2s and 2p orbitals. To achieve a stable octet, the nitrogen atom must form four covalent bonds, which requires the promotion of an electron from the 2s orbital to the 2p orbital. The four hybrid orbitals that result are then arranged in a tetrahedral geometry, with the CNC bond angle of 109.5 degrees.


In conclusion, triethylamine [(CH3CH2)3N] is a molecule in which the nitrogen atom is sp3 hybridized and the CNC bond angle is approximately 109.5 degrees. This geometry is characteristic of tetrahedral molecules with four electron groups around the central atom and allows triethylamine to function as a versatile nucleophile and base in organic reactions. Understanding the hybridization and geometry of this molecule is important for predicting its reactivity and designing synthetic routes in organic chemistry.

To know more about Triethylamine visit:

brainly.com/question/32070506

#SPJ11

Both reactions (a) and (b) would occur spontaneously in the forward direction.

To determine whether a reaction will occur spontaneously in the forward direction, we can analyze the standard cell potential (E°) of the reaction. If the E° value is positive, the reaction is spontaneous in the forward direction.

Let's analyze the given reactions:

a. Ni(s) + Zn2+(aq) → Ni2+(aq) + Zn(s)

In this reaction, Ni is being oxidized from its elemental state (Ni(s)) to Ni2+(aq), while Zn2+ is being reduced to Zn(s). To determine if the reaction is spontaneous, we need to compare the standard reduction potentials (E°) of the two half-reactions.

The standard reduction potential for Ni2+(aq) + 2e- → Ni(s) is -0.25 V.

The standard reduction potential for Zn2+(aq) + 2e- → Zn(s) is -0.76 V.

To calculate the overall standard cell potential (E°cell), we subtract the reduction potential of the oxidation half-reaction from the reduction potential of the reduction half-reaction:

E°cell = E°reduction - E°oxidation

E°cell = (-0.25 V) - (-0.76 V)

E°cell = 0.51 V

Since the overall standard cell potential (E°cell) is positive (0.51 V), the reaction is expected to occur spontaneously in the forward direction (from left to right).

b. Al(s) + 3Ag+(aq) → Al3+(aq) + 3Ag(s)

In this reaction, Al is being oxidized from its elemental state (Al(s)) to Al3+(aq), while Ag+ is being reduced to Ag(s). To determine if the reaction is spontaneous, we compare the standard reduction potentials (E°) of the two half-reactions.

The standard reduction potential for Al3+(aq) + 3e- → Al(s) is -1.66 V.

The standard reduction potential for Ag+(aq) + e- → Ag(s) is 0.80 V.

Calculating the overall standard cell potential (E°cell):

E°cell = E°reduction - E°oxidation

E°cell = (0.80 V) - (-1.66 V)

E°cell = 2.46 V

Since the overall standard cell potential (E°cell) is positive (2.46 V), the reaction is expected to occur spontaneously in the forward direction (from left to right).

Therefore, both reactions (a) and (b) would occur spontaneously in the forward direction.

Learn more about spontaneous  here:

https://brainly.com/question/5372689

#SPJ11

The process in which entropy decreases is typically a process that leads to a more ordered or structured system.

Entropy is a measure of disorder or randomness in a system. Freezing a liquid is an example of such a process. When a liquid is frozen, its molecules become more closely packed together and form a more ordered structure. This leads to a decrease in the randomness of the system, which in turn leads to a decrease in entropy.

The other processes listed, such as dissolving KCl in water, heat flowing from a hot to a cold object, and expanding a gas at constant temperature, typically lead to an increase in entropy because they lead to a more disordered or random system.

In summary, freezing a liquid is the process in which entropy is decreased.

To know more about entropy visit:

https://brainly.com/question/20166134

#SPJ11

In the given reaction, the reactant that acts as a Bronsted-Lowry base is:

c) KHS (potassium hydrogen sulfide)

According to the Bronsted-Lowry theory, an acid is a proton (H+) donor, and a base is a proton acceptor. In the reaction provided:

HCl(aq) + KHS(aq) -> KCl(aq) + H2S(aq)

HCl donates a proton (H+) to KHS, making HCl an acid. KHS accepts the proton from HCl, which makes it a base. KHS then undergoes a protonation reaction, forming KCl and H2S.

Therefore, in the given reaction, KHS acts as a Bronsted-Lowry base by accepting the proton from HCl.

To know more about Bronsted-Lowry theory refer here

brainly.com/question/30460067#

#SPJ11

The atoms that make up a newborn baby originated from various sources. Primarily, these atoms were forged inside stars through nucleosynthesis, where hydrogen and helium fused to form heavier elements.

The birth and death of multiple generations of stars over billions of years contributed to the creation of these atoms. Additionally, some atoms may have been produced during cosmic events such as supernovae or stellar collisions. Ultimately, these atoms were dispersed into space and later incorporated into the material that formed Earth, including the molecules necessary for life. The atoms comprising a newborn baby have a fascinating cosmic origin. The fundamental elements, such as hydrogen and helium, were formed shortly after the Big Bang. However, the heavier elements necessary for life, such as carbon, oxygen, nitrogen, and calcium, were produced through nucleosynthesis within stars. As stars reach the end of their lifecycle, they undergo nuclear fusion processes, where immense temperatures and pressures cause lighter elements to merge and form heavier ones. Elements up to iron are typically synthesized through stellar nucleosynthesis. During a supernova explosion, massive stars release tremendous energy and scatter these newly formed atoms into space. Supernovae are critical in dispersing heavier elements throughout the universe. These atoms then mix with interstellar gas and dust, eventually becoming part of molecular clouds, which are regions of space where new stars and planetary systems form. Over time, gravitational forces cause these clouds to collapse, leading to the formation of new stars and their associated planetary systems. The birth and death of multiple generations of stars have played a crucial role in the formation of the atoms present in a newborn baby. Each stellar generation enriches the interstellar medium with heavier elements, which are incorporated into subsequent generations of stars and their planetary systems. Furthermore, cosmic events like stellar collisions can also contribute to the production of heavy elements. The atoms from these processes eventually become part of the material that forms planets like Earth. On Earth, the atoms essential for life come together in various compounds, including water, amino acids, and nucleotides, which are the building blocks of DNA and proteins. These molecules are synthesized through chemical reactions that occur in the oceans, atmosphere, and even within living organisms themselves. Eventually, these complex molecules combine to form cells, and through a process of growth and development, they give rise to a newborn baby. In summary, the atoms that make up a newborn baby have their origins in the nucleosynthesis processes occurring within stars. The birth and death of stars, supernova explosions, stellar collisions, and the subsequent formation of planets have all contributed to the creation and dispersion of these atoms throughout the universe. Through complex chemical reactions and biological processes on Earth, these atoms come together to form the molecules necessary for life and ultimately give rise to a newborn baby

Learn more about Big Bang here: brainly.com/question/17209127

#SPJ11

To calculate ΔG∘rxn (standard Gibbs free energy change) and E∘cell (standard cell potential) for a redox reaction with n = 2 and an equilibrium constant of K = 30 at 25 °C, you need to use the following relationships:

ΔG∘rxn = -RT ln(K)

E∘cell = (RT/nF) ln(K)

where:

R is the ideal gas constant (8.314 J/(mol·K))

T is the temperature in Kelvin (25 °C = 298 K)

n is the number of moles of electrons transferred in the balanced redox equation

F is the Faraday constant (96485 C/mol)

K is the equilibrium constant

Let's calculate the values:

ΔG∘rxn = -RT ln(K)

= -(8.314 J/(mol·K)) * (298 K) * ln(30)

≈ -12160 J/mol

≈ -12.2 kJ/mol

E∘cell = (RT/nF) ln(K)

= (8.314 J/(mol·K)) * (298 K) / (2 mol * 96485 C/mol) * ln(30)

≈ 0.079 V

Therefore, the ΔG∘rxn is approximately -12.2 kJ/mol, and the E∘cell is approximately 0.079 V.

To know more about ΔG∘rxn refer here

brainly.com/question/31745388#

#SPJ11

The curve that corresponds to the titration of the more concentrated weak acid solution if equal volumes of two different weak acids are titrated with 0.35 M NaOH is the lower, blue curve (Option C).

To determine which curve corresponds to the titration of the more concentrated weak acid solution, we need to look at the inflection point of each curve. Inflection point is the point at which the concavity of a curve changes. It is also the point at which the derivative of the curve is at a maximum or minimum value. It represents the midpoint of the buffering region of the titration curve. Therefore, the inflection point of the curve corresponds to the equivalence point of the titration curve.

Since the two curves have the same initial pH, the curve with the lower inflection point will correspond to the titration of the more concentrated weak acid solution. This is because a more concentrated solution will require less NaOH to reach the equivalence point, resulting in a lower inflection point. Therefore, the lower, blue curve corresponds to the titration of the more concentrated weak acid solution.

Thus, the correct option is C.

Learn more about titration curve: https://brainly.com/question/31857985

#SPJ11

To manufacture 325 tubes of sunscreen, approximately 0.536 kg of benzyl salicylate is needed.

First, we need to calculate the mass of benzyl salicylate in one tube of sunscreen. Since the sunscreen preparation contains 2.50% benzyl salicylate by mass, we can calculate the mass as follows,

Mass of benzyl salicylate in one tube = 2.50% of 4.0 oz

Mass of benzyl salicylate in one tube = (2.50/100) * 4.0 oz

Mass of benzyl salicylate in one tube = 0.1 oz.

Next, we calculate the mass of benzyl salicylate needed to manufacture 325 tubes of sunscreen,

Mass of benzyl salicylate needed = Mass of benzyl salicylate in one tube * Number of tubes

Mass of benzyl salicylate needed = 0.1 oz * 325

Mass of benzyl salicylate needed = 32.5 oz

To convert the mass from ounces to kilograms, we use the conversion factor,

1 kg = 35.274 oz

Mass of benzyl salicylate needed in kilograms = (32.5 oz) / (35.274 oz/kg)

Mass of benzyl salicylate needed in kilograms ≈ 0.921 kg. Therefore, to manufacture 325 tubes of sunscreen, approximately 0.536 kg of benzyl salicylate is needed.

To know more about Concentration, visit,

https://brainly.com/question/28564792

#SPJ4

Identify gaps, conduct research, and gather necessary data to fill missing information in the synthesis.

To provide missing information for each step in a synthesis, you would need to review the steps that have already been taken and identify any gaps or missing pieces of information that are needed to move forward with the process. This might involve conducting further research, gathering additional data or input from experts, or revisiting previous steps to ensure that all necessary information has been considered.
In terms of subject matter, the missing information could relate to any number of topics, depending on the nature of the synthesis and the specific subject area being studied. For example, if the synthesis is focused on a scientific or technical topic, missing information might include details on experimental procedures, data analysis methods, or theoretical frameworks. Alternatively, if the synthesis is focused on a social or cultural topic, missing information might include insights into historical context, cultural practices, or social dynamics that are relevant to the topic at hand.
Ultimately, the key to providing missing information in a synthesis is to carefully consider each step in the process and to identify any gaps or missing pieces of information that need to be addressed. By doing so, you can ensure that your synthesis is comprehensive, accurate, and informed by the best available data and insights.

Learn more about missing information:

brainly.com/question/25294884

#SPJ11

The balanced nuclear equation for the alpha decay of polonium-210 is Po-210 → Pb-206 + He⁻⁴

In this equation, Po-210 represents polonium-210, Pb-206 represents lead-206, and He⁻⁴ represents helium-4. The subscripts on each element represent the number of protons in the nucleus, and the superscripts represent the total number of nucleons (protons + neutrons) in the nucleus.

In alpha decay, an alpha particle (which is a helium nucleus) is emitted from the nucleus of an atom. The alpha particle has 2 protons and 2 neutrons, so the atomic number of the atom decreases by 2 and the mass number decreases by 4.

In this case, the polonium-210 atom loses 2 protons and 2 neutrons, becoming a lead-206 atom.

To know more about balanced nuclear equation, refer here:

https://brainly.com/question/30852800#

#SPJ11

Two observations about  are;

Water  can be moved  from the roots to the leaves  with the help of the xylem vessels which is been one through proces of transpiration as a result of the evaporation of water from the leaves whereby Glucose is been delived as a result of  photosynthesis in the leaves  and can move t oter part with phloem vessels.

Xylem vessels and phloem tubes, respectively, carry carbohydrates and water. Given that these two channels are hydraulically linked, it is reasonable to assume that the physiological coupling between the two transport systems exists.

Learn more about  plant at:

https://brainly.com/question/29594

#SPJ1

The maximum work that could be obtained from 5.35 g of zinc metal is calculated as - 17. 3903 kJ

          Zn(s) + Cu²⁺(aq) ---> Zn²⁺ (aq) + Cu(s)

Δ G ° = Δ G° product - Δ G° reactant

         =   - 147 - 65.52

           =  - 212.52 kJ / mole

molar mass of zinc = 65.38 g/ mole

mole of Zn = [tex]\frac{gram of Zn}{molar mass}[/tex]

                     = 5.35/ 65.38

W = - 212.52 kJ/ mole × 5.35 / 65.38 mole

           =  - 17. 3903 kJ                    

To put it another way, "G" is the change in a system's free energy as it transitions from one initial state (all reactants) to another, final state (all products). The maximum amount of usable energy that can be released (or absorbed) during the transition from the initial to the final state is shown by this value.

"Mass per mole" can be used to describe molar mass. To put it another way, a substance's molar mass is the total mass of all its atoms in one mole's worth. It is quantified in grams per mole.

Learn more about Molar mass:

brainly.com/question/21334167

#SPJ4

Cold preservation, also known as refrigeration, was commercialized in the United States during the 1910s. This decade saw the widespread adoption of refrigeration technology in many industries, including food processing, transportation, and home refrigeration.

Before the commercialization of refrigeration, food preservation relied on traditional methods such as salting, smoking, and canning. These methods were effective to a certain extent but had limitations in terms of shelf life and taste.

The invention of mechanical refrigeration allowed for longer and safer storage of perishable foods, reducing food waste and improving food safety.

The 1910s were a pivotal decade for the adoption of this technology, and refrigeration continues to be a crucial aspect of the food industry and daily life.

Visit here to learn more about commercialization:

brainly.com/question/24219749

#SPJ11

Th e Ksp for the equilibrium of zinc phosphate is approximately 1.9225×10^−30.

The solubility product constant (Ksp) is the equilibrium constant for the dissolution of a sparingly soluble salt. In this case, the equilibrium is:

Zn3(PO4)2(s) ⇌ 3Zn2+(aq) + 2PO3-4(aq)

The Ksp expression for this equilibrium is:

Ksp = [Zn2+]^3 [PO3-4]^2

Given that the molar solubility of zinc phosphate (Zn3(PO4)2) is 1.5×10^−7 M, we can substitute this value into the Ksp expression:

1.5×10^−7 = [Zn2+]^3 [PO3-4]^2

Since the stoichiometric coefficients for zinc ions (Zn2+) and phosphate ions (PO3-4) in the balanced equation are 3 and 2, respectively, we can express their concentrations in terms of the molar solubility:

[Zn2+] = 3 × (1.5×10^−7) = 4.5×10^−7 M

[PO3-4] = 2 × (1.5×10^−7) = 3.0×10^−7 M

Substituting these values into the Ksp expression, we get:

Ksp = (4.5×10^−7)^3 × (3.0×10^−7)^2

Evaluating this expression gives:

Ksp = 1.9225×10^−30

Therefore, the Ksp for the equilibrium of zinc phosphate is approximately 1.9225×10^−30.

Learn more about zinc phosphate here:

https://brainly.com/question/28959000

#SPJ11

Answer: ksp= 8.2 X 10^-33

Hence, option (a) is correct.  the corresponding range of hydrogen ion concentrations, a.7.94 x 10^-4 ≤ [H+] ≤ 7.

The pH readings for wines vary from 2.1 to 3.1. The formula to find the concentration of hydrogen ions in the solution is, $$ pH = - log [H^+] $$Using this formula, we can rearrange it to find the concentration of hydrogen ions, i.e. $$ [H^+] = 10^{-pH} $$Using the given pH range, we get the corresponding range of hydrogen ion concentrations as follows:$$ 10^{-2.1} ≤ [H^+] ≤ 10^{-3.1} $$Solving the above equation, we get, $$ 7.94 × 10^{-4} ≤ [H^+] ≤ 7.94 × 10^{-3} $$Therefore, the corresponding range of hydrogen ion concentrations is a. 7.94 × 10^-4 ≤ [H+] ≤ 7.94 × 10^-3.

To know more about pH  visit:

https://brainly.com/question/28602224

#SPJ11

To separate p-toluic acid, p-tert butylphenol, and acetanilide, you can follow the steps outlined in the flowchart below:

Dissolve the mixture in a suitable solvent (such as dichloromethane or ethyl acetate).

Add dilute hydrochloric acid (HCl) to the mixture.

Shake the mixture well and allow it to separate into two layers.

Separate the organic layer (bottom layer) from the aqueous layer (top layer).

Transfer the organic layer to a clean container.

Perform a simple distillation to separate the solvent from the organic compounds. Collect the distillate.

Test the distillate to confirm the absence of any residual solvent.

Add sodium hydroxide (NaOH) solution to the remaining aqueous layer obtained in step 5.

Adjust the pH of the solution to basic using additional NaOH if necessary.

The p-toluic acid will convert to its sodium salt and remain in the aqueous layer.

Extract the aqueous layer with a non-polar solvent (such as diethyl ether or ethyl acetate) to remove any remaining organic compounds.

Separate the organic layer from the aqueous layer and transfer it to a clean container.

Add hydrochloric acid (HCl) to the organic layer obtained in step 13 to convert the p-toluic acid sodium salt back to p-toluic acid.

Separate the organic layer from the aqueous layer and transfer it to a clean container.

Perform a simple distillation to separate the p-toluic acid from the other organic compounds. Collect the distillate.

Test the distillate to confirm the presence of p-toluic acid.

The remaining mixture in the organic layer obtained in step 13 contains p-tert butylphenol and acetanilide.

Add sodium hydroxide (NaOH) solution to the organic layer to convert acetanilide to its sodium salt.

Extract the organic layer with a non-polar solvent to remove p-tert butylphenol from the mixture.

Separate the organic layer and transfer it to a clean container.

Add hydrochloric acid (HCl) to the organic layer to convert the acetanilide sodium salt back to acetanilide.

Separate the organic layer from the aqueous layer and transfer it to a clean container.

Perform a simple distillation to separate p-tert butylphenol from acetanilide. Collect the distillate.

Test the distillate to confirm the presence of p-tert butylphenol.

It is important to consider the specific properties of the compounds and adjust the steps accordingly.

Additionally, safety precautions should be followed while handling chemicals, and it is recommended to perform the separation process in a well-ventilated area or under a fume hood.

To know more about p-toluic acid refer here:

https://brainly.com/question/4261730#

#SPJ11

The correct answer is e) i and iii. Both a primary amine (i) and a secondary amine (iii) can form an enamine with aldehydes and ketones.

An enamine is a functional group that contains a nitrogen atom attached to a carbon atom, which is also bonded to another carbon atom. It can be formed by the reaction of an amine with an aldehyde or ketone.

Let's analyze the given options:

a) i: This compound is a primary amine. It can react with aldehydes and ketones to form an imine, not an enamine. Therefore, option a) i will not form an enamine.

b) ii: This compound is a secondary amine. It can react with aldehydes and ketones to form an enamine. Therefore, option b) ii can form an enamine.

c) iii: This compound is also a secondary amine. Like option b) ii, it can react with aldehydes and ketones to form an enamine. Therefore, option c) iii can form an enamine.

d) iv: This compound is a tertiary amine. Tertiary amines do not form enamines with aldehydes and ketones. Therefore, option d) iv will not form an enamine.

e) i and iii: As discussed earlier, option i (a primary amine) will form an imine, not an enamine. However, option iii (a secondary amine) can form an enamine. Therefore, option e) i and iii can form an enamine.

In conclusion, the correct answer is e) i and iii. Both a primary amine (i) and a secondary amine (iii) can form an enamine with aldehydes and ketones.

Learn more about ketones here:

https://brainly.com/question/31480223

#SPJ11

The volume of the balloon will occupy in the instant if a balloon filled with 2.00 L of helium initially at 1.85 atm of pressure rises into the atmosphere and the surrounding pressure reaches 340. MmHg before it bursts is 7.90 L.

To determine the volume of the balloon will occupy in the instant before it bursts, we are given data:

The problem gives the initial and final states in different units. Hence, we need to identify all of the pressures and all of the volumes by organizing them into a table.

Here, we have given the volume and pressure in different units. We will need to convert all pressures to the same units (usually atmospheres) and all volumes to the same units (usually liters).

Conversion factors:

Now, we can use Boyle’s law to solve the problem. Boyle’s law states that pressure and volume of a gas are inversely proportional to each other at constant temperature.

i.e, P₁V₁ = P₂V₂

Then, V₂ = P₁V₁/P₂  

Substitute the values of P₁, V₁, and P₂.

V₂ = (1.85 atm × 2.00 L)/(0.447 atm)  

On solving the above expression, we get

V₂ = 7.90 L (rounded off to two significant figures)

Therefore, the volume of the balloon will be 7.90 L in the instant before it bursts.

Learn more about volume: https://brainly.com/question/32018189

#SPJ11