A television set is plugged into a 120 V outlet. The television circuit carries a current equal to 0.75 A. What is the overall resistance of the television set?​

(a) The initial energy of the block due to its position is 1.96 J.

(b) The velocity of the block at the bottom of the loop is 3.96 m/s.

(c)  the velocity of the block at the top of the loop is 3.13 m/s.

The initial energy of the block due to its position is calculated as follows;

P.E = mgh

P.E = 0.25 X 9.8 X 0.8

P.E = 1.96 J

The velocity of the block at the bottom of the loop is determined by applying the principle of conservation of energy as shown below;

P.Ei + P.Ef = K.Ei + K.Ef

1.96 + 0 = 0 + ¹/₂mvf²

vf² = 2(1.96)/m

vf² = (2 x 1.96) / (0.25)

vf² = 15.68

vf = √15.68

vf = 3.96 m/s

The velocity of the block at the top is calculated by applying principle of conservation of energy,

P.Ei + P.Ef = K.Ei + K.Ef

1.96 = mghf + ¹/₂mvf²

where;

1.96 = 0.25 x 9.8 x 0.3   +   0.5 x 0.25vf²

1.225 = 0.125vf²

vf² = 1.225/0.125

vf² = 9.8

vf = 3.13 m/s

Learn more about conservation of energy here: https://brainly.com/question/166559

Answer:

D. Neither the box nor people will move.

Explanation:

We are given three forces that are present on the box and friction is the result of someone trying to move the box. The net force of the people pulling/pushing is barely 50 Newtons which doesn't compare with the frictional force of 400 Newtons, you will need to surpass a net force of 400 Newtons in order for the box to START moving.

Answer:

a=650.549

b=246.4819

c=38.5261

Explanation:

Answer:

encourage all attempts at reading, writing, and speaking

Explanation:

Answer:

this pdf should help you out

Explanation:

The initial velocity of a car that accelerates to a speed of 55 m/s within the span of 8 seconds is 23m/s.

The initial velocity of a moving body can be calculated using the following formula:

a = v - u/t

Where;

According to this question, a car accelerates to a speed of 55 m/s within the span of 8 seconds. If its acceleration was 4 m/s², the initial velocity is calculated as follows:

4 = 55 - u/8

32 = 55 - u

u = 55 - 32

u = 23m/s

Therefore, the initial velocity of a car that accelerates to a speed of 55 m/s within the span of 8 seconds is 23m/s.

Learn more about initial velocity at: https://brainly.com/question/18084516

If the comb and the paper are attracted to each other the charge on the paper, is D)must be positive

This states that

Now, given that a negatively charged plastic comb is brought close to, but does not touch, a small piece of paper. If the comb and the paper are attracted to each other the charge on the paper, this implies that both the negatively charged plastic comb and the paper have opposite charges.

Since the charge on the plastic comb is negative, this means that the charge on the paper must be positive

So, if the comb and the paper are attracted to each other the charge on the paper, is D)must be positive

Learn more about electric charge here:

https://brainly.com/question/2373424

Answer:

Fundamental quantities are quantities that were created to measure a object/substance which are the basis on which derived quantities are formed, where as derived quantities are created by extracting variables from the fundamental quantities.

All of the following are examples of physical properties except tearing.

This is used to describe the state of a physical system and is usually measurable.

Examples include:

Tearing isn't an example of a physical property which was why option A was chosen as the most appropriate choice.

Read more about Physical property here https://brainly.com/question/17436856

Hello!

We know that at the BOTTOM of the pendulum's trajectory, the bob has a maximum speed. This means that its KINETIC ENERGY is at a maximum, while its Gravitational POTENTIAL ENERGY is at a minimum.

On the other hand, when the bob is at its highest points, the bob has a velocity of 0 m/s, so its KE is at a minimum and its PE is at a maximum.

We can use the work-energy theorem to solve. Let the Initial Energy equal the bob's energy at one of the sides, while the final Energy equals the bob's energy at the bottom.

[tex]E_i = E_f\\\\PE = KE[/tex]

Recall that:
PE = mgh

m = mass (kg)

g = acceleration due to gravity (m/s²)

h = height (m)

KE = 1/2mv²

m = mass (kg)

v = velocity (m/s)

Set the two equal and solve for 'h'.

[tex]mgh = \frac{1}{2}mv^2[/tex]

Cancel mass.

[tex]gh = \frac{1}{2}v^2[/tex]

Solve for 'h'.

[tex]h = \frac{v^2}{2g}\\\\h = \frac{3^2}{2(9.8)} = \boxed{0.459 m}[/tex]

Answer:

A) nucleus, ribosomes, and chloroplasts

B) mitochondria, cell wall, chloroplasts

D) cell membrane, ribosomes, small vacuoles

E) cell wall, central vacuole, and cell membrane

Explanation:

It cannot be C as the list features centrioles, which is an animal-cell only structure.

Based on the findings above, the accurate statements are:

The information that all three institutions gathered is quite similar with their results showing a range of annual temperature deviation of 0.05°C in 2010.

However, this data is not enough to say that temperatures are rising gradually because there is no information on temperatures from the previous years.

Find out more on annual temperatures at https://brainly.com/question/27043563.

[tex]\text{Volume,}~V = 50 \times 25 \times 8 = 10000~ m^3\\\\\text{Density,}~\rho = 1.2 ~ kg ~m^{-3}\\ \\\\\text{We know that,}\\\\`~~~~~~~\rho = \dfrac{m}{V}\\\\\implies m = \rho V \\\\\implies m = 1.2 \times 10000 = 12000~kg}\\\\\text{Hence the mass of air is 12000 kg.}[/tex]

The material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.

Latent heat is defined as the thermal energy absorbed or released during a phase change of a substance.

Latent heat can also be explained as the energy in hidden form which is supplied or extracted to change the state of a substance without changing its temperature.

From the above explanation, we can conclude that, the material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.

Learn more about latent heat here: https://brainly.com/question/87248

The momentum, in the x-direction, that was transferred to the more massive cart after the collision is 19.38 kgm/s.

The momentum transfered to the more massive cart is determined by applying the principle of conservation of linear momentum as shown below;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

where;

⁻ΔP₁ = ΔP₂

ΔP₂ = m₂v₂ - m₂u₂

ΔP₂ = m₂(v₂ - u₂)

ΔP₂ = 3m₁(v₂ - u₂)

ΔP₂ = 3 x 3.8 x (1.7 - 0)

ΔP₂ = 19.38 kgm/s

Thus, the momentum, in the x-direction, that was transferred to the more massive cart after the collision is 19.38 kgm/s.

The complete question is beblow

A cart of mass 3.8 kg is traveling to the right (which we will take to be the positive x-direction for this problem) at a speed of 6.9 m/s. It collides with a stationary cart that is three times as massive. After the collision, the more massive cart is moving at a speed of 1.7 m/s, to the right.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

Newton's law of universal gravitation is typically stated that every particle attracts every particle in the universe with force that is directly proportional to the result of their masses and inversely proportional to the square of distance between their centers.

1st image - B) Object position

2nd image - A) Focal length

3rd image - C) Image position

Biomolecules are fundamental for life. They required both energy supply and building structures.

Biomolecules are organic molecules that fundamental for life and must be ingested from the regular diet.

Biomolecules include proteins (e.g., meal proteins), lipids (fats) and also carbohydrates (e.g., glucose).

Biomolecules required both energy supply (e.g., glucose) and building structures (e.g., amino acids in proteins).

Learn more about biomolecules here:

https://brainly.com/question/10904629

Hi there!

Part 1:

According to Newton's Third Law, every action has an EQUAL and OPPOSITE reaction.

For a collision, the objects involved exert an EQUAL and OPPOSITE impulse on each other, which means the forces exerted are equal as well.

Therefore, the school bus and Toyota Prius exert an EQUAL FORCE on each other.

Part 2:
The school bus has a greater mass.

Part 3:

Using Newton's Second Law:
[tex]\Sigma F = ma[/tex]

Using this relationship, the smaller the mass, the larger the acceleration. Since the forces are EQUAL, the Toyota Prius will experience a larger acceleration because it has a smaller mass.

Answer:

See Below

Explanation:

Mass of child = 21 kg

Mass of bicycle = 5.9 kg

Total mass = 22 + 5.9 = 27.9 kg

Velocity = 4.5 m/s

1) Total momentum of the child and the bike together

= Total mass * Velocity

= 27.9*4.5

= 125.55 kg m per second

2) Momentum of the child

= Mass of child*Velocity

= 21*5.9

= 123.9 kg m per second

3) Momentum of the bike

= Mass of bike*Velocity

= 5.9*4.5

= 26.55 kg m per second

This is an experiment that explains the Bernoulli principle. According to this principle, at the bottom of the spoon, there will be a reduction in pressure.

So the pressure at the bottom of the spoon reduces because the velocity of the water is larger and the height of the column of water is smaller at this part.

So the spoon is attracted to the water at the point of lowest pressure because objects gravitate to low-pressure points.

Learn more about the Bernoulli Principle at:

https://brainly.com/question/24623919

If a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr. Details about average speed can be found below.

Average speed can be calculated by dividing the distance moved by a body by the time taken. That is;

Average speed = Distance/Time

According to this question, a jogger runs a 10 kilometer race in 60 minutes. The average speed is calculated as follows:

Average speed = 10km/1hr

Average speed = 10km/hr.

Therefore, if a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr.

Learn more about average speed at: https://brainly.com/question/12322912

Answer:

True.

Explanation:

The higher the wattage the brighter the light. The efficiency of the system was introduced using and coletician lamps

Step 1: Define an equation that relates the volume of a sphere to its radius.

V = 4/3*π*r3

Step 2: Take the derivative of each side with respect to time (we will define time as "t").

(d/dt)V = (d/dt)(4/3*π*r3)

dV/dt = 4πr2*dr/dt

Step 3: We are told in the problem statement that diameter is 100m, so therefore r = 50mm. We are also told the radius of the sphere is increasing at a rate of 2mm/s, so therefore dr/dt = 2mm/s. We are looking for how fast the volume of the sphere is increasing, or dV/dt.

dV/dt = 4π(50mm)2*(2mm/s)

dV/dt = 62,832 mm3/s

Answer:

Matter

Explanation:

A wave is a disturbance that transfers energy from one place to another without transferring matter. Waves transfer energy away from the source, or starting place, of the energy.

Answer:

energy

Explanation:

I took the test think of hydropower dams

Answer:

Explanation:

Use that:

[tex]F=-\vec{\nabla}U(x,y)=-\left(\hat{i} \frac{\partial U}{\partial x}+\hat{j}\frac{\partial U}{\partial y}\right)=-11.6x\hat{i}+10.8y^{2}\hat{j}[/tex]

Then use the 2nd Newton's Law of Motion:

[tex]\vec{a}=\frac{\vec{F}}{m}=\frac{-11.6x\hat{i}+10.8y^{2}\hat{j}}{0.04}=-290x\hat{i}+270y^{2}\hat{j}[/tex]

At x = 0.3 and y = 0.6, we can find the acceleration as:

[tex]\vec{a}=-87\hat{i}+97.2\hat{j}[/tex] (in SI unit)

Then the magnitude of the acceleration on that point is:

[tex]a=\sqrt{(-87)^{2}+(97.2)^{2}}\approx 130.44[/tex] (SI Unit)