Metals normally have different densities, so we can try to determine which metal is this by its density.
Assuming it is pure, the density of the metal is its mass divided by its volume:
[tex]\begin{gathered} \rho=\frac{m}{V} \\ \rho=\frac{750g}{65.8cm^3} \\ \rho\approx11.4g/cm^3 \end{gathered}[/tex]Now, we need to look for some table with densities of various metals and see which one has the density we found, 11.4 g/cm³.
Since we don't have one, we can look for one. In it, we can see that the only metal with this density is lead.
So, the metal in the question should be lead.
(The question is in the photo Sorry Lol) What volume of chlorine gas at 36.0°C and 1.74 atm is needed to react completely with12.0 g of sodium to form NaCl?Answer in units of L
3.786137931L of chlorine are needed.
1st) It is necessary to write the balanced equation of the reaction between chlorine gas (Cl2) and sodium (Na) to produce sodium chloride (NaCl):
[tex]2Na+Cl_2\text{ }\rightarrow\text{ 2 NaCl}[/tex]Now we know that 1 mol of chlorine gas is needed to react with 2 moles of sodium in the production of sodium chloride. With the molar mass of Na (23.0g/mol) and Cl2 (71.0g/mol), we can see that 71.0g of Cl2 are needed to react with 46.0g of sodium.
2nd) Knowing that 71.0g of Cl2 are needed to react with 46.0g of sodium, we can use a mathematical rule of three to calculate the amount of Cl2 that will react completely with 12.0g of sodium:
[tex]\begin{gathered} 46.0\text{gNa}-71.0gCl_2 \\ 12.0\text{gNa}-x=\frac{12.0\text{gNa}\cdot71.0Cl_2}{46.0\text{gNa}} \\ x=18.5gCl_2 \end{gathered}[/tex]3rd) Now it is necessary to convert the mass of chlorine gas into moles, so we can use it in the Ideal gas formula:
[tex]\begin{gathered} 71.0gCl_2-1mol \\ 18.5gCl_2-x=\frac{18.5gCl_2\cdot1mol}{71.0gCl_2} \\ x=0.26\text{mol} \end{gathered}[/tex]So, 0.26 moles of chlorine gas are needed.
4th) With the formula of Ideal gases and replacing the values of Pressure (P), number of moles (n) and Temperature (T, in Kelvin), we can calculate the volume of Cl2:
[tex]\begin{gathered} P\mathrm{}V=n\mathrm{}R\mathrm{}T \\ 1.74atm.V=0.26mol\cdot0.082\frac{atm\cdot L}{\text{mol}\cdot K}\cdot309K \\ V=\frac{0.26mol\cdot0.082\frac{atm\cdot L}{\text{mol}\cdot K}\cdot309K}{1.74atm} \\ V=3.786137931L \end{gathered}[/tex]Finally, 3.786137931L of chlorine are needed to react completely with 12.0g of sodiu.
A legend is a traditional story that explains something in real life. Sometimes they are accepted as true, but sometimes they are fantastical and just plain fun. There are many legends that surround the North Star explaining its creation as well as why it is stationary.
Take some time to research some of the legends of the North Star. After you have had a chance to read several of them, create your own fantastical story of the North Star. It can be how it came to be or explain why it is stationary.
There are many legends of the North Star that have been told over the years by different civilizations and of them is a mythical story told about the existence of the star.
What is a Legend of the North Star?It is said that it is a little dot left behind after God created the stars and based on the fact that the dot was not like the other stars as it was almost an afterthought and then it came to the attention of Luminaria who granted the dot its wish and it became a real star like the others and became the Star of Bethlehem.
Hence, it can be seen that the given legend and mythical stories are just one of the many ways humans try to understand the phenomena of astrology and how they attach certain significance to it.
With this in mind, it is very clear to see that the North Star is a special star.
Read more about the North Star here:
https://brainly.com/question/1130377
#SPJ1
What is the MOST likely reason a large retailer would have a digital forensics lab?
A.
to investigate online shopping fraud
B.
to hack into their customers’ computers
C.
to find out who is shoplifting in their stores
D.
to help local communities solve major crimes
Answer:
A
Explanation:
In-house forensics allows companies to work faster, cheaper, and potentially better than law enforcement. Labs at large companies are more likely than police labs to have high-tech tools and the latest forensics software, said Seigfried-Spellar.
In what direction will the reaction proceed ? Explanation please
In order to calculate this question, we will use the reaction quotient Q, which has a very similar formula as the equilibrium formula, but this Q can be calculated not just in equilibrium (where Q = K) but in any part of the reaction, so K is the equilibrium, and Q is what is used to see where the reaction will shift towards until it reaches equilibrium, we can have three possible outcomes:
Q = K, the reaction is already in equilibrium
Q > K, the reaction will proceed in the reverse direction
Q < K, the reaction will proceed in the forward direction
Let's set up the formula:
Q = [products]/[reactants], the brackets mean Concentration of each compound. Now adding our compounds
Q = [BrCl]^2/[Br2]*[Cl2], the BrCl is raised to 2 because we have 2 BrCl in the reaction, this is a rule for the equilibrium formula, we use the coefficient in front of the compound and raise its concentration to this number
Now we need the concentration of each compound, to find it we will use the Molarity formula
M = n/V
M = 0.15/2
M = 0.075M, notice that since we have the same number of moles and volume for every compound, we will have the same concentration for every compound, going back to our formula
Q = [0.075]^2/[0.075][0.075]
Q = 1.0
Since K = 7.0 and Q = 1.0
K > Q, the reaction will proceed in the forward direction in order to increase the concentration of 2 BrCl in order to finally reach Q=K
In the reaction 2H2 + O2 →2H2O if 14grams of H2 react, how many grams of water could be produced?
Answer:
Explanation:2H2 + O2 —-> 2H2O
The mole ratio of H2 to H2O is 2 : 2 = 1:1
4 moles of H2 = 4 moles of H2O
Moles of H20 = 4mol
Molar mass of H2O = 18g/mol
Mass = moles X Molar mass
= 4mol x 18g/mol
= 72g
A 7.94 g of solid CO2 (Dry ice) is allowed to sublime in a balloon. The final volume of the balloon is 1.00 L at 301 K. What is the pressure?
In order to find the pressure in this situation, we will be using the Ideal gas Law, which perfectly correlates these informations, the formula for this Law is:
PV = nRT
Where:
P = pressure, we want to find it
V = volume, 1.00 L
n = number of moles, we will also find it
R = is the gas constant, 0.082
T = 301 K
To find the number of moles, we need to use the mass provided in the question and also the molar mass of CO2, 44.01g/mol
44.01g = 1 mol
7.94g = x moles
x = 0.180 moles of CO2
Now we can use the ideal gas formula:
P * 1.00 = 0.180 * 0.082 * 301
P = 4.44 atm
71.11 Liters of nitrogen gas combined with 60.6 liters of oxygen gas. What volume of nitrogen dioxide gas is made?
The reaction to produce nitrogen dioxide from nitrogen and oxygen is as follows:
[tex]N_{2(g)}+2O_{2(g)}\rightarrow2NO_{2(g)}[/tex]Since all the reactants and products are gases, we can take the coefficients as liters of substance.
Dividing the volumes we have of each reactant by their corresponding coefficient we can determine the limit reagent:
[tex]\begin{gathered} \frac{71.11LN_2}{1LN_2}=71.11 \\ \frac{60.6LO_2}{2LO_2}=30.3 \end{gathered}[/tex]From this we can conclude that the limit reagent is oxygen.
We have to base our calculations on this substance.
According to the given equation, 2 L of O2 produce 2 L of NO2, use this ratio to find the volume of nitrogen dioxide produced:
[tex]60.6LO_2\cdot\frac{2LNO_2}{2LO_2}=60.6LNO_2[/tex]It means that 60.6 liters of nitrogen dioxide gas are made.
A quantity of 3.30 × 102 mL of 0.500 M HNO3 is mixed with 3.30 × 102 mL of 0.250 M Ba(OH)2 in a constant-pressure calorimeter of negligible heat capacity. The initial temperature of both solutions is the same at 18.46°C. The heat of neutralization when 1.00 mol of HNO3 reacts with 0.500 mol Ba(OH)2 is −56.2 kJ/mol. Assume that the densities and specific heats of the solution are the same as for water (1.00 g/mL and 4.184 J/g · °C, respectively). What is the final temperature of the solution?
The final temperature of the solution is 20 °C.
Given that :
volume of HNO₃ = 0.33 L
molarity = 0.500 M
no. of moles HNO₃ = 0.33 × 0.500
= 0.165 mol
moles of Ba(OH)₂ = 0.33 × 0.250
= 0.082 mol
Q = ΔH × n
Q = - 52600 J/mol × 0.165 mol
Q = - 8679 J
total volume = 330 mL +330 mL = 660 mL
Density = mass / volume
mass = 1 g/mL × 660 mL
mass = 660 g/mL
now, the change in temperature can be calculated by following formula :
Q = mc ( ΔT )
Q = mc ( T2 - T1 )
- 8679 = 660× 4.184 ( T2 - 18.46 °C)
T2 = 20 °C
Thus, A quantity of 3.30 × 10² mL of 0.500 M HNO3 is mixed with 3.30 × 10² mL of 0.250 M Ba(OH)₂ in a constant-pressure calorimeter of negligible heat capacity. The initial temperature of both solutions is the same at 18.46°C. The heat of neutralization when 1.00 mol of HNO₃ reacts with 0.500 mol Ba(OH)₂ is −56.2 kJ/mol. Assume that the densities and specific heats of the solution are the same as for water (1.00 g/mL and 4.184 J/g · °C, respectively). the final temperature of the solution is 20 °C.
To learn more about specific heat here
https://brainly.com/question/4312435
#SPJ1
Express the following in liters at STP:
4.83 x 10^-3 moles HF
Considering the definition of STP conditions, 4.83 × 10⁻³ moles of HF will occupy a volume of 0.108192 L at STP.
STP conditionsThe STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases, and 1 mole of any gas occupies an approximate volume of 22.4 liters.
Volume in this caseIn this case, you have 4.83×10⁻³ moles of HF. You can apply the following rule of three: if by definition of STP conditions 1 mole of HF occupies a volume of 22.4 liters, 4.83×10⁻³ moles occupies how much volume?
volume= (4.83×10⁻³ moles ×22.4 L)÷ 1 mole
volume= 0.108192 L
Finally, there is a volume of 0.108192 L at STP.
Learn more about STP conditions:
brainly.com/question/17915431
#SPJ1
A redox reaction:A. is a reaction where oxygen is returned it its natural state.B. is a reduction reaction where oxygen is removed.C. is comprised of two half reactions, a reduction and an oxidation.D. is a reaction where oxygen is added to a compound.
In this question, we have to classify what is a redox reaction, and as the name suggests, we have a reduction and an oxidation reaction occurring in this type of reaction, where one element will lose electrons, or will be oxidized, and another element will gain electrons or will be reduced. Therefore the best answer will be letter C
Calculate the boiling point of a 0.33 m solution of a solute in benzene.
(Kb = 2.53°C /m).
The boiling point of the solution is 80.93°C.
What is the boiling point?We know that the boiling point has to do with the temperature at which the pressure inside the system is the same as the atmospheric pressure. Now we know that the boiling point of the pure benzene is 80.1 °C.
Also;
ΔT = K m i
ΔT = boiling point elevation
K = boiling point constant
m = molality
i = Van Hoff factor
ΔT = 2.53°C /m * 0.33 m * 1
ΔT = 0.83°C
Boiling point of the solution = 0.83°C + 80.1 °C
= 80.93°C
Learn more about boiling point:https://brainly.com/question/2153588
#SPJ1
I need help on this!! it’s due today! will mark brainliest if it’s correct
Nuclear fission causes a neutron to split the isotope U-235 when it collides with its nucleus. When a slow neutron interacts with a heavy nuclide like 235U, nuclear fission can occur (0.025 eV).
What happens when uranium-235 atoms are bombarded by slow moving neutrons?When a slow neutron interacts with a heavy nuclide like 235U, nuclear fission can occur (0.025 eV). If a fission (or splitting apart) occurs, the nuclear material splits into two (on average) about equal fragments that travel away with kinetic energy, producing heat.
Nuclear fission causes a neutron to split the isotope U-235 when it collides with its nucleus. Two or three additional neutrons as well as fission products are released during this fission process. The chain reaction is continued by some of the emitted neutrons. There is significant energy released in every fission reaction.
When a uranium atom divides, additional neutrons are also released. The process keeps repeating again as these neutrons keep crashing into more uranium atoms. This process is called a nuclear chain reaction. This reaction is controlled in nuclear power plant reactors to produce a desired amount of heat.
To learn more about nuclear fission refer to:
https://brainly.com/question/3992688
#SPJ13
An organic compound contains carbon hydrogen and oxygen. If it contains 45.27% carbon and 4.43 % hydrogen by mass determine the empirical formula
This organic compound has in its structure the next element: C, H, and O
45.27% C
4.43 % H
The rest 100%-45.27%-4.43 = 50.3 % O
-----------------------------------------------------------------------------------------------------------------
The empirical formula of a chemical compound is the simplest whole-number ratio of atoms present in a compound.
Procedure:
Step 1)
We convert % into grams (g). Let's assume we have a 100g sample. Therefore,
45.27 % C = 45.27 g
4.43 % H = 4.43 g
50.3 % O = 50.3 g
Step 2)
We calculate the number of moles of each element. To do this, we need every atomic mass
For C)
[tex]45.27\text{ g x }\frac{1\text{ mol}}{12.01\text{ g}}=3.767\text{ moles}[/tex]For H)
[tex]4.43\text{ g x }\frac{1\text{ mol}}{1.00\text{ g}}=\text{ 4.43 moles}[/tex]For O)
[tex]50.3\text{ g x }\frac{1\text{ mol}}{16.0\text{ g}}=3.14\text{ moles}[/tex]Step 3)
We divide all moles by the smallest one of them (3.14 moles of O)
For C) 3.767 moles/3.14 moles = 1.19 = 1 (we need integer numbers)
For H) 4.43 moles/3.14 moles = 1.41 = 1
For O) 3.14 moles/3.14moles = 1
The empirical formula is CHO
why show you heat the sample to constant mass
Heating to constant mass is done to retain the constant mass of the sample so that its weight remains the same and does not affect the reading throughout the experiment.
Heating to constant mass is a process in which a sample usually a powder or crystal is heated until the mass of the sample remains constant or the same.This is done to remove the excess moisture or other impurities that may affect the accuracy of the readings during the experiment.In this process, the sample is heated, cooled down weighed, and again the sample is heated, cooled down, and weighed. This process is done repeatedly until the mass of the sample remains constant in two or three consecutive measurements. Thus, heating to constant mass gives a minimized error during the experiment.To learn more about how the mass number is calculated for an element click below:
https://brainly.com/question/295273
#SPJ4
What is the correct formula that wouldresult from the combination of the twoionic species?Na¹+ and CIO ¹-1-4BNa₂(CIO4)2NaCIO4
To determine how the formula will be when combining two ionic species, we must look at the oxidation states of the ions. The Na ion has an oxidation state of +1 and the ClO4 ion has an oxidation state of -1.
The number of ions must be such that the total sum of the oxidation states is zero. If we have a Na+1 ion and a ClO4(-1) ion, the sum will be equal to zero. So there must be one ion of each species in the molecule.
[tex]Na^{+1}ClO_4^{-1}\rightarrow NaClO_4[/tex]Therefore, the answer will be: NaCIO4
An experiment was designed to test the hypothesis that peanuts have more energy than a chip. The experiment determines calorimetry of the peanut and the chip, using water to capture the energy of the samples when they were burned. A 10 g sample of chip and a 15 g sample of peanut was burned underneath a metal can that held 50 g of water. A thermometer captured how much the temperature of the water increased. The water increased by 7 degrees for the peanut and 3 degrees for the chip. What error was made?
a The temperatures were read wrong.
b Different amounts of food samples were used.
c The food samples were too similar.
d Different amounts of water were used.
Answer:
b Different amounts of food samples were used.
Explanation:
The mass of the two samples needs to be the same in order for the test to be accurate.
check alll of the following statements that are true about the ion whose symbol Ca2+
The correct statement about the description of ion whose symbol is Ca2+ among the choices above are:
It is a cationIt is a divalent metalThe options b and d are correct.
How calcium ion is a cation and divalent metalIt follows that elements whose charge on them are positive are called cations. In order words, in the periodic table of science of chemistry, the positively charged ions of elements are known as cations. Calcium has a positive of 2 on as it ion and this makes it a cation.
In addition to the above, calcium ion helps in signal transduction pathways of cells of living organisms. This goes to say that they also help in the body's normal functioning of the human body.
However, on a second note, calcium in the periodic table belongs to group 2, has a valence electrons of 2 and a metallic element; thereby making it a divalent metal.
In conclusion, we can now confirm from all said above that calcium above is a cation.
Complete question:
Check all of the following statements that are true about the ion whose symbol Ca2+
a. It is an anion
b. It is a cation
c. Its atoms is connected by tripple bonds
d. It is a divalent metal
Read more on ions:
https://brainly.com/question/22277121
#SPJ1
Can someone help me with this pls 2. Which is the volume of 3.20 moles of O₂?7. Which is the volume of 100. of O₂?
2. Which is the volume of 3.20 moles of O₂?
We are told that at STP one mol of any gas occupies 22.4 L. We will use that relationship to find the volume occupied by 3.20 moles of O₂.
1 mol of O₂ = 22.4 L
volume of O₂ = 3.20 moles of O₂ * 22.4 L/(1 mol of O₂)
volume of O₂ = 71.7 L
Answer: 3.20 moles of O₂ occupies 71.7 L
7. Which is the volume of 100. g of O₂?
In this case we will use the same relationship, but we are given grams instead of moles. So first we have to convert the mass in grams into moles. To do that we use the molar mass of O₂.
atomic mass of O = 16.00 amu
molar mass of O₂ = 2 * 16.00
molar mass of O₂ = 32.00 g/mol
Once that we know that the mass of 1 mol of O₂ is 32.00 g, we can find the number of moles that we have in 100. g of it.
moles of O₂ = mass of O₂ /(molar mass of O₂)
moles of O₂ = 100. g/(32.00 g/mol)
moles of O₂ = 3.13 moles
Finally we can find the volume that 3.13 moles of O₂ occupies (remember that 1 mol of any gas occupies 22.4 L at STP).
volume of O₂ = 3.13 moles * 22.4 L/(1 mol)
volume of O₂ = 70.1 L
Answer: 100. g of O₂ occupies 70.1 L
When something heat up new energy is created and when something coole dan energy isdestroyer check one)How could you revise this statement to be more complete or correol?
When something heats up energy is absorbed from another system and when something cooler down energy is released to another system.
When a reaction releases heat, it is classified as exothermic. The absorption of heat in a reaction makes it endothermic.
If you have 5.3x10^26 molecules of water how many moles of water do you have?
The question requires us to calculate the amount of moles of water that we would have in 5.3x10^26 molecules of water.
To solve this problem, we'll need to consider the Avogadro Number: this number states the amount of particles (electrons, ions, atoms, molecules etc.) in one mole of a substance. The Avogadro Number corresponds to 6.022 x 10^23 particles per mol.
Considering the Avogadro number and the number of molecules provided by the question, we can write:
6.022 x 10^23 molecules of water -------------------- 1 mol of water
5.3 x 10^26 molecules of water ------------------------ x
Solving for x, we'll have:
[tex]x=\frac{(5.3\times10^{26}molecules\text{ of water)}\times(1\text{ mol of water)}}{(6.022\times10^{23}\text{molecules of water)}}=8.8\times10^2mol\text{ of water}[/tex]Therefore, there are 8.8 x 10^2 moles of water in 5.3 x 10^26 molecules of water.
An unknown metal with a charge of 4 combines with oxygen. How many oxygen ionsare needed in a neutral compound of this metal and oxygen?
2 oxygen ions
ExplanationOxygen is a non-metal with an atomic number of 8. The electronic configuraton of the element is given as:
[tex]O;\text{ }1s^22s^22p^^4[/tex]If a an unknown metal with a charge of 4 combines with oxygen, the required reaction will be:
[tex]M^{4+}+O^{2-}\rightarrow MO_2[/tex]Since oxygen is in group VI of the periodic table and has a oxidation number of -2, to form a neutral compound with charge of +4, this means that 2 oxygen ion will combine with the metal to form a neural compound MO2
give the n and l values and the number of orbitals for sublevel 5g.
The n and l values and the number of orbitals for sublevel 5g is :
5g shell , n= 5 subshell g , l = 4, Number of orbitals for sublevel = 9.
There are total four quantum numbers:
1) Principal quantum number , n
2) Angular quantum number , l
3) Magnetic quantum number , ml
4) spin quantum number , ms
For 5g shell, n = 5
subshell g , l = 4 ....0 - s , 1 - p , 2 - d, 3 - f, 4 -g
number of orbitals in subshell = (2l + 1) ( 2×4 + 1) = 9
Thus, The n and l values and the number of orbitals for sublevel 5g is :
5g shell , n= 5 subshell g , l = 4, Number of orbitals for sublevel = 9.
To learn more about quantum numbers here
https://brainly.com/question/14650894
#SPJ1
What change to the device would increase the amount of light energy it is converting?
A. adding magnets into the bulb
OB. increasing the size of the bulb
C. increasing the size of the vanes
D. changing the vanes to be all silver
I need help please because a few tutors I got had false answer and when I tried to do it it was also wrong.
Answer:
Explanations:
a) The balanced chemical reaction for the complete combustion of pentane is expressed as:
[tex]C_5H_{12}+8O_{2(g)}\rightarrow5CO_{2(g)}+6H_2O_{(g)}[/tex]Note that oxygen, carbondioxide and water are all in gaseous state.
I’m getting certain numbers but I want to be sure I’m doing this right
To write the numbers with the specific number of significant figures, we need to remember that zeros to the left don't count as a significant figure and also that we can add zeros to the right to add significant figures to the numbers.
1) 1.5408 to 3 significant figures, we start counting from left to right, so we will maintain the numbers until the second decimal place, the "8". Since the next is "0", the rounding is "8", so the number is 1.54.
2) Here is similar, but since we don't have decimal places, we need to put the zeros in place of the numbers we are rounding. Since we want 2 significant figures, we will maintain only the first two. However, since the third is greater than 5, we need to round up, so the number is 4400.
3) To get this, we will maintain the zeros to the elft, but they don't count, so we start counting from the "1". Since the third number is less than 5, we round down, so the number is 0.019.
4) Now, here we have an example we need to add zeros. The way it is, 0.5 has only 1 significant figure, so we need to add 3 more zeros to the right to get to 4 significant figures. The number is 0.5000.
5) Here, is the same as item 3, but we want 3 significant figures and since the fourth is greater than 5 we round it up. So, the number is 0.066.
SYNTHESIS OFCARBONATECTIONLABORATORY SIMULATIONLab Data- X99.00.10CollectedVolume sodium carbonate (mL)Molarity sodium carbonate (M)Volume calcium chloride (mL)Molarity calcium chloride (M)ObservationsThe mixture has now turned white100.00.20hemDisp0.211.30Mass filter paper (9)Mass filter paper + precipitate (9)CalculatedObserved mass calcium carbonate (9)Identify limiting reactantExpected mass calcium carbonate (9)Percent yield (%)0.88Calcium chlorideHow to calculate theoretical yield and percent yield
Answer:
[tex]\begin{gathered} \text{Limiting Reagent = Sodium Carbonate} \\ \text{Percent Yield = 98\%} \end{gathered}[/tex]Explanation:
The chemical reaction talks about the synthesis of calcium carbonate
It is from the reaction between sodium carbonate and calcium chloride
Let us write the equation of reaction as follows:
[tex]Na_2CO_{3(aq)}+CaCl_{2(aq)}\text{ }\rightarrow2NaCl_{(s)\text{ }}+CaCO_{3(aq)}[/tex]Firstly, we want to get the expected mass of calcium carbonate
This speaks about getting the theoretical yield based on the equation of reaction
From the data collected, 90 ml of 0.20 M (mol/L) of sodium carbonate gave calcium carbonate
We need to get the actual number of moles of sodium carbonate that reacted
We can get this by multiplying the volume by the molarity (kindly note that we have to convert the volume to Liters by dividing by 1000)
Thus, we have it as:
[tex]\frac{90}{1000}\times\text{ 0.1 = 0.009 moles}[/tex]Hence, we see that 0.009 moles of sodium carbonate reacted theoretically
Since 1 mole of sodium carbonate gave 1 mole calcium carbonate, it is expected that 0.009 mole of sodium carbonate will give 0.009mole of calcium carbonate
What we have to do now is to get the theoretical grams of calcium carbonate produced
That would be the product of the number of moles of calcium carbonate and its molar mass
The molar mass of calcium carbonate is 100 g/mol
The theoretical yield (expected mass) is thus:
[tex]100\text{ g/ mol }\times\text{ 0.009mol = 0.9 g}[/tex]Finally, we proceed to get the percentage yield which is calculated using the formula below:
[tex]\text{Percent Yield = }\frac{Actual\text{ yield}}{\text{Theoretical yield}}\times\text{ 100 \%}[/tex]The actual yield is the observed mass which is given as 0.88 g
The percent yield is thus:
[tex]\frac{0.88}{0.9}\times\text{ 100 = }98\text{ \%}[/tex]
Explain the difference between a cation and an anion. Give hints for remembering each.
Some atoms are neutral and others have positive or negative charges.
The charged atoms are called "ions".
- If the ion has positive charge, it is called cation.
- If the ion has negative charge, it is called anion.
Ions can be identified by their charge, for example:
- Cations: Na^+1, K^+1, Mg^+2
- Anions: Cl^-1, Br^-1
what percent of a sample of As-81 remains un decayed after 43.2 seconds
The percentage of the sample of As-81 remaining undecayed after 43.2 seconds is 40.6%
How to determine the percentage remaining undecayedWe'll beging by calculating the number of half lives that has elapsed. This can be obtained as follow
The following data were obtained from the question:
Time (t) = 43.2 secondsHalf-life (t½) of As-81 = 33 secondsNumber of half-lives (n) =?n = t / t½
n = 43.2 / 33
n = 1.3
Finally, we shall determine the percentage remaining undecayed. This is shown below:
Original percentage (N₀) = 100%Number of half-lives (n) = 1.3Percentage remaining (N) = ?N = N₀ / 2ⁿ
N = 100 / 2^1.3
N = 40.6%
Thus, we can conclude that the percenatge undecayed is 40.6%
Learn more about half life:
https://brainly.com/question/28739165
https://brainly.com/question/20551328
#SPJ1
Which statement describes an intensive property of matter?
OIt is the same for every sample of a single substance.
OIt depends on how a substance was formed.
It is the same for every sample of every substance.
OIt depends on the amount of substance present.
27
It is the same for every sample of every substance present describes an intensive property of matter.
The correct option is C.
What is the meaning of intensive property?An intense property is a greater stability of a system that is independent of the system's size or the volume of its constituent elements. Based on the definitions, internal energy, volume, or density are extensive properties while pressure, temperature, and densities are intensive properties.
Why density is a intensive property?Because of the small range of densities present among the samples, density is an intense attribute. Concentrations were roughly the same regardless of the beginning mass. The data show that density is an intense attribute of matter because it is independent of the amount of substance present.
To know more about Intensive property visit:
https://brainly.com/question/13733851
#SPJ13
The complete question is
Which statement describes an intensive property of matter?
A-It is the same for every sample of a single substance.
B-It depends on how a substance was formed.
C-It is the same for every sample of every substance.
D-It depends on the amount of substance present.
17) Which atom has a higher electronegativity, Be or O?