A shopkeeper bought 50 pangas and 30 jembes from a wholesaler A for sh 4260. Had he bought half as many jembes and 5pangas less,he would have sh 1290 less. Had the shopkeeper bought from wholesaler B,he would have paid 25% more for a pangas and 15 %less for a jembe. How much would he have saved if he had bought the 50 pangas and 30 jembes from wholesaler B

Answer:

Step-by-step explanation:

to factorize [tex](x-4)^{2} -36[/tex]
(x-4-6) * (x - 4 / 6)
(x-10) * (x+2)

Answer: To solve the inequality x − (5 − 3x) ≤ 2x − 1, we need to simplify it by first distributing the negative sign in front of the parentheses, and then combining like terms. This gives us:

x - 5 + 3x ≤ 2x - 1

4x - 5 ≤ 2x - 1

Next, we can isolate the variable on one side of the inequality by subtracting 2x from both sides:

4x - 2x - 5 ≤ -1

2x - 5 ≤ -1

Finally, we can isolate x by adding 5 to both sides and dividing by 2:

2x ≤ 4

x ≤ 2

So the solution to the inequality is x ≤ 2.

To graph this solution on a number line, we can put a closed dot at 2 and shade to the left of it, since all values less than or equal to 2 satisfy the inequality. Therefore, the correct graph is A, a number line with a closed dot at 2 shaded to the left.

Step-by-step explanation:

The value of distance between city B to city C given by 'x' is found as: 41 miles.

Distance in air miles from city A to each city B and city C are-

City A to City B= 11

City A to city C= 29

City B to City C= X

Then,

Distance between city B to city C = distance between city A to city B +  between city A to city C

x = 29 + 11

Solving the linear equation:

x = 41

Thus, the value of distance between city B to city C given by 'x' is found as: 41 miles.

Know more about linear equation

https://brainly.com/question/28732353

#SPJ9

Answer:

A

Step-by-step explanation:

we know that

tan x=sin x/cos x

if  

then

x belongs to the II quadrant or IV quadrant

sin 30°=

cos 30°=

therefore

tan 30°=

the angle theta has a 30-degree reference angle and is located in Quadrant II or IV

Answer:

A

Step-by-step explanation:

The y-intercept of the graph is located at (0, 0). So, the value of c is 0.

What is graph?

A graph is a visual representation of data that displays the relationship between two or more variables. It consists of a set of points, called vertices or nodes, which are connected by lines or curves, called edges or arcs. The vertices represent the variables, while the edges represent the relationship between them.

To find the y-intercept of the graph of y = -7x + 140y, we need to substitute x = 0 into the equation and solve for y. This will give us the y-coordinate of the point where the graph intersects the y-axis.

Substituting x = 0, we get:

y = -7(0) + 140y

y = 140y

Simplifying the equation, we get:

139y = 0

Dividing both sides by 139, we get:

y = 0

Therefore, the y-intercept of the graph is located at (0, 0). So, the value of c is 0.

To learn more about graph visit:

https://brainly.com/question/19040584

#SPJ1

The price per unit that yields maximum revenue is $400.

We can start by finding the demand function for the product. Since the demand is assumed to be linear, we can use two data points to find the equation of the line:

(40, 300) and (45, 275)

Using the point-slope form of a line, we get:

(275 - 300) / (45 - 40) = -5/25 = -1/5

y - 300 = (-1/5)(x - 40)

y = (-1/5)x + 320

where y is the number of units sold per week and x is the price per unit.

The revenue function is simply the product of the price and the number of units sold:

R = xy

Substituting the demand function, we get:

R = x(-1/5)x + 320x

Simplifying, we get:

R = -1/5x^2 + 320x

To find the price per unit that yields maximum revenue, we need to take the derivative of the revenue function with respect to x and set it equal to zero:

dR/dx = -2/5x + 320 = 0

Solving for x, we get:

x = 800/2 = $400

Learn more about point slope form here

brainly.com/question/29054476

#SPJ4

5??????????????????????

Answer:

x = y = 4.24

Step-by-step explanation:

sin45 = x/6

x = 6(sin45) = 4.24

y = 6(cos45) = 4.24

Because this is a 45-45-90 isosceles triangle, x=y

The slope of the line that passes through the points (6,10) and (6,−2) is undefined.

The slope of a line is defined as the ratio of the vertical change (rise) to the horizontal change (run) between any two points on the line. In mathematical terms, the slope of a line passing through two points (x₁, y₁) and (x₂, y₂) is given by the formula:

slope = (y₂ - y₁) / (x₂ - x₁)

Now, let's apply this formula to the given points (6, 10) and (6, -2). Here, x₁ = 6, y₁ = 10, x₂ = 6, and y₂ = -2. Substituting these values in the formula, we get:

slope = (-2 - 10) / (6 - 6)

Notice that the denominator is zero, which means that the line is a vertical line. In this case, the slope is undefined.

To know more about slope here

https://brainly.com/question/14511992

#SPJ4

The surface area of the prism is 210.4 in².

The surface area of a prism is the sum of the areas of all of its faces.

For a right prism (a prism with rectangular bases), the formula for the surface area is:

Surface Area = 2(length x width) + (height x perimeter of base)

where;

The surface area of the prism is calculated as;

S.A = 2 (9 in x 5 in) + ( 4.3)(2 (9 in + 5 in )

S.A = 90 in²  +  120.4 in²

S.A = 210.4 in²

Learn more about surface area of prism here: https://brainly.com/question/1297098

#SPJ1

we can deduct that the angle on the L vertex is 25°, because that way all three angles will result in 180°.

We know that JKLM is a parallelogram, which means that its opposite sides are parallels, such that: JK // ML and JM // KL.

So, we know that the angle MLJ equals 25°, and JK // ML, from this we can say that angles LJK and MLJ are equal, because they are ''internal alternate angles'', since that they are inside the parallels.

So, angle LJK is 25, and JKL is a triangle, which has the angle at K vertex equal to 130°. We know that internal angles in a triangle must sum 180°.

Since that, two angles, in the triangle JKL, measure 130° + 25° = 155°; we can deduct that the angle on the L vertex is 25°, because that way all three angles will result in 180°.

learn more about parllelogram,

https://brainly.com/question/29249343

#SPJ4

Answer:

блина я сама не

Step-by-step explanation:

Answer: 32

Step-by-step explanation:

the min is 54 while the max is 86

86-54 is the range which is 32

The gross earning per week is = $ 495.56.

The salary to hourly wage calculator allows you to view your earnings over several time frames. It is a versatile tool that enables you to change your annual salary into an hourly payout, compute your monthly salary into an hourly rate, change your weekly rate into an annual salary, etc. You will save time and effort by using our salary converter, which completes all tasks fast and easily.

Joseph works 5 hours on Monday

10 hours on Tuesday,

9. 5 hours on Wednesday

8. 25 hours on Thursday

6 hours on Friday

7. 5 hours on Saturday

He is paid $9. 85 per hour and time and a half for all hours over 40 per week.

Total working hour= 5+10+9.5+8.25+6+7.5=46.25

Earning per hour is = 9.85

total earning= 46.25*9.85=$455.56

total gross earning= $ 455.56+40=495.56

learn more about Earning per hour,

https://brainly.com/question/18221968

#SPJ4

Therefore , the solution of the given problem of cardinality comes out to be A×B×C is 3 .

A's cardinality is equivalent to its element count if A has a finite amount of elements. Say |A|=5 if A=2, 4, 6, 8, 10. The outcome of a numbering process is referred to as "cardinality". A set's cardinality is determined by the number of components in it. For illustration, the group 1, 2, 3, 4, and 5 has a greater cardinality of five than the set 1, 2, 3, and 5, each of which has an attributes of three.

Here,

a)

I "Chinese New Year of 2023" has one cardinal element, making it one-dimensional.

ii) Since there are three elements in S and each element can either be included in a subset or not, the power set P(S) of S=1,,apple has 23 = 8 elements.

iii) xRx2=3 has two components because the squares of two real numbers, 3 and -3, are both 3.

iv) Since "0" is regarded as one element and there are five other distinct elements in the collection,  {{0,1,2},3,4,5,∅,{{0}}}  has six elements.

b)

=> A={0,1,2}, B={apple}, and C={apple}

The set difference between C and A is only the element 0, which is absent from C, so A=apple0,1,2=apple.

Consequently, A, B, and C include the following components:

=> {(0,apple,apple), (1,apple,apple), (2,apple,apple)}

=>  A×B×C is 3 .

To know more about cardinality visit:

https://brainly.com/question/29093097

#SPJ1

97 bielorrusias hacen falta para comprarte un perro

i have no idea what that is

Answer:

Step-by-step explanation:

So first you would combine like terms which in this case are 9x, -6x, y, and y

So: 9x+y-6x+y

(9x-6x)+(y+y)

3x+2y is the final answer

hope this helped

Answer:

Step-by-step explanation:

225 hamburgers were sοld οn Saturday

A linear equatiοn is an equatiοn οf a straight line in twο variables, usually written in the fοrm y = mx + b, where m is the slοpe and b is the y-intercept. It represents a relatiοnship between twο variables that is linear, meaning that as οne variable changes, the οther changes at a cοnstant rate.

Let's use algebra tο sοlve the prοblem.

Let x be the number οf hamburgers sοld οn Saturday.

Then, accοrding tο the prοblem, the number οf cheeseburgers sοld οn Saturday is 73 mοre than the number οf hamburgers sοld, sο the number οf cheeseburgers sοld is x + 73.

The prοblem alsο tells us that the tοtal number οf hamburgers and cheeseburgers sοld is 523. Sο we can set up an equatiοn:

x + (x + 73) = 523

Simplifying the left side οf the equatiοn:

2x + 73 = 523

Subtracting 73 frοm bοth sides:

2x = 450

Dividing bοth sides by 2:

x = 225

Therefοre, 225 hamburgers were sοld οn Saturday.

To learn more about Linear Equation from thee given link

https://brainly.com/question/2030026

#SPJ1

a) Sample size 13:(43.614, 44.386)

b) Sample size 1300:(43.9663, 44.0337)

The weight of the screws is normally distributed and has a variance of 0.64g^2. In a sample, the mean of the screws was 44g. The following are the two-sided (symmetrical) confidence intervals with a 95 percent confidence level for the expected value of the weight:Option a) Sample size 13:For a sample size of 13, the standard error of the mean is calculated as follows:SE = σ/√nwhere SE is the standard error, σ is the variance, and n is the sample size.In this case, SE = √(0.64)/√(13) = 0.1772.The t-distribution should be used to calculate the confidence interval since the population's standard deviation is unknown.The t-value corresponding to the 95% confidence interval with 12 degrees of freedom (df = n – 1) is 2.179. Therefore, the confidence interval can be calculated as follows:44 ± 2.179(0.1772)= 44 ± 0.386= (43.614, 44.386)The expected weight of the screws in the population is estimated to be between 43.614 g and 44.386 g.Option b) Sample size 1300:For a sample size of 1300, the standard error of the mean is calculated as follows:SE = σ/√nwhere SE is the standard error, σ is the variance, and n is the sample size.In this case, SE = √(0.64)/√(1300) = 0.0172.The z-distribution should be used to calculate the confidence interval since the sample size is large enough to assume that the sample mean is approximately normally distributed.The z-value corresponding to the 95% confidence interval is 1.96. Therefore, the confidence interval can be calculated as follows:44 ± 1.96(0.0172)= 44 ± 0.0337= (43.9663, 44.0337)The expected weight of the screws in the population is estimated to be between 43.9663 g and 44.0337 g.

Learn more about Sample size

brainly.com/question/25894237

#SPJ4

Answer:

18x + 22y

Step-by-step explanation:

4x (3) + 5y (3) + 2x (3) + 7y

Multiply the coefficients of the variables x and y with the constants, so that:

4x (3) + 5y (3) + 2x (3) + 7y

= 12x + 15y + 6x + 7y

Then just add up the coefficients with the same variable:

12x + 6x = 18x

15y + 7y = 22y

So the final answer is:
18x + 22y

[tex]\huge\text{Hey there!}}[/tex]

[tex]\mathsf{4x^3 + 5y^3 + 2x^3 + 7y}[/tex]

[tex]\large\textsf{COMBINE the LIKE TERMS (if you have any):}[/tex]

[tex]\mathsf{= (4x^3 + 2x^3) + (5y^3) + (7y)}[/tex]

[tex]\mathsf{= 4x^3 + 2x^3 + 5y^3 + 7y}[/tex]

[tex]\mathsf{= 6x^3 + 5y^3 + 7y}[/tex]

[tex]\large\textsf{Therefore your ANSWER should be:}[/tex]

[tex]\huge\boxed{\mathsf{6x^3 + 5y^3 + 7y}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

The Answer should be 4:1 it's the half of the 8 to 2

(a) The solution of the seasonal-growth model is

P(t) = P0[tex]e^{(k/r sin(rt))}[/tex]

(b) After solving we get [tex]\lim_{t \to \infty} P(t)[/tex] = NONE . As, t approaches to infinity

(a) To solve the differential equation DP/dt = kPcos(rt-[tex]\theta[/tex]),

The variables can be split apart and integrat:

∫(1/P) dP = ∫k cos(rt-[tex]\theta[/tex] ) dt

ln|P| = (k/r)sin(rt- [tex]\theta[/tex] ) + C

where

C is the constant of integration.

By solving for P, we get:

P(t) = [tex]e^{(k/r sin(rt- \theta ) + C)}[/tex]

We can determine the value of C by using the initial condition P(0) = P0:

P(0) = [tex]e^{(k/r sin(- \theta) + C)}[/tex]= P0

C = ln(P0) - (k/r)sin(-[tex]\theta[/tex] )

C = ln(P0) + (k/r)sin([tex]\theta[/tex] )

By substituting this into the expression for P(t), we get:

P(t) = [tex]e^{(k/r sin(rt-\theta) + ln(P0) + (k/r)sin(\theta))}[/tex]

By simplifying, we get:

P(t) = P0[tex]e^{(k/r sin(rt-\theta) + k/r sin(\theta))}[/tex]

P(t) = P0[tex]e^{(k/r sin(rt))}[/tex]

(b) We must take into account the behavior of sin(rt) as t approaches infinity in order to determine the limit of P(t) as t approaches infinity. Sin(rt) will fluctuate between -1 and 1 as t grows because the sine function oscillates between -1 and 1.

As a result, the term [tex]e^{(k/r sin(rt))}[/tex] will bounce between [tex]e^{(-k/r)}[/tex] and [tex]e^{(k/r)}[/tex] as t approaches infinity, but it won't converge to a single value.

As a result, there is no P(t) limit as t approaches infinity.

Hence, the answer is:

[tex]\lim_{t \to \infty} P(t)[/tex] = NONE.

For similar question on integration

https://brainly.com/question/22008756

#SPJ4

The area of one slice of a large pizza with a diameter of 24 inches is 56.52 square inches.

The formula for calculating the area of a circle is A = πr^2, where A is the area of the circle, π is the constant pi (3.1415) and r is the radius of the circle. To calculate the area of a slice, we must first calculate the radius of the pizza. To do this, we divide the diameter of the pizza (24 inches) by 2, which yields a radius of 12 inches.

Now that we have the radius, we can calculate the area of one slice. Plugging the radius of 12 inches into the equation, we get A = 3.1415*12^2 = 452.16 square inches. Since each pizza is cut into 8 equal slices, each slice would have an area of 452.16/8 = 56.52 square inches.

Learn more about area of a circle here:

https://brainly.com/question/28642423

#SPJ4

Based on the angles, a triangle can be classified as either acute, right, or obtuse and based on the sides, a triangle can be classified as either equilateral, isosceles, or scalene.

To classify a triangle, we need to consider both its angles and sides. Based on the angles, a triangle can be classified as either acute, right, or obtuse.

An acute triangle has all three angles measuring less than 90 degrees. A right triangle has one angle measuring exactly 90 degrees. An obtuse triangle has one angle measuring greater than 90 degrees.

Based on the sides, a triangle can be classified as either equilateral, isosceles, or scalene.

An equilateral triangle has all three sides equal in length. An isosceles triangle has two sides of equal length. A scalene triangle has all three sides of different lengths.

Learn more about triangle here

brainly.com/question/30946036

#SPJ4

a. Simplified equivalent expressiοns: A = 3x + 15

b. The expressiοn that represents this situatiοn is: 6x - 4

c. The expressiοn that represents the tοtal number οf items in these fοur rοws is: 4(2x+1)

d. The expressiοn that represents this situatiοn is: 3(x+1)

Fοr instance, we may calculate the area οf a rectangle by dividing its length by its breadth. The surface area οf the rectangle is either 24 οr 8. There are a tοtal οf eight tiny squares, if yοu cοunt them. (See Rectangle's Area.)

a. On the Expressiοn Mat, draw a rectangle with a width οf 3 units and a length οf x+5 units. The expressiοn that represents the area οf this rectangle is:

A = 3(x+5)

Simplified equivalent expressiοns:

A = 3x + 15

b. On the Expressiοn Mat, draw twο equal grοups οf 3x-2. The expressiοn that represents this situatiοn is:

(3x-2) + (3x-2)

6x - 4

c. On the Expressiοn Mat, draw fοur rοws οf 2x+1. The expressiοn that represents the tοtal number οf items in these fοur rοws is:

4(2x+1)

Simplified equivalent expressiοns:

8x + 4

d. On the Expressiοn Mat, write a number and then draw an arrοw tο shοw that it is being increased by οne, and then draw anοther arrοw tο shοw that the result is being tripled. The expressiοn that represents this situatiοn is:

3(x+1)

Simplified equivalent expressiοns:

3x + 3

3(x + 1)

To know more about area visit:

brainly.com/question/27683633

#SPJ1

The normal curve can be used to approximate the binomial probability as all conditions are met, with at least 10 successes and failures, a success rate of less than 10%, and a sample size of at least 20.

Only when specific requirements are met can the normal curve be used to approximate the binomial probability in this situation. The trial must have at least 10 successes and 10 failures as its initial requirement. There are more than 10 successes and 10 failures in this instance since 124 machines are being tested. The second requirement is that the likelihood of success must be under 10%. The likelihood of a computer failing in this scenario is 4%, which is less than 10%. The sample size needs to be at least 20, which is the third requirement. The sample size in this instance is 124, which is more than 20.

Learn more about probability here

https://brainly.com/question/11234923

#SPJ4

There are four numbers: 8, 15, 100 and 123.

Number is a mathematical object used to count, measure, and label. It is used in many different contexts, from everyday life to scientific research. Numbers can be represented in various forms, such as symbols, digits, and words. They are used to represent quantities, distances, time, and other concepts. Numbers can also be used to represent relationships, such as equations, which are statements that describe how two or more things are related.

To solve this problem, it is best to line the numbers up on the y axis or x axis. To multiply the numbers, start by multiplying the numbers on the y axis first. So, 8 x 15 = 120. Then, multiply the result by the number on the x axis which is 100. 120 x 100 = 12,000. Finally, multiply 12,000 by the last number on the x axis which is 123. 12,000 x 123 = 1,476,000. Therefore, the answer to the problem is 1,476,000.

To know more about number click-
https://brainly.com/question/24644930
#SPJ1

To calculate a rate, divide two quantities with different units; to calculate a unit rate, divide a rate by the quantity being measured.

What is rate ?

In mathematics, a rate is a ratio that compares two quantities with different units. It is typically expressed as the amount of change of one quantity with respect to another quantity. Rates are often used in the context of describing how quickly or slowly something changes over time or space.

To calculate a rate, we need to divide two quantities that have different units. For example, if we want to find the rate of a car's speed, we divide the distance traveled (in miles) by the time taken to travel that distance (in hours).

The formula for rate is:

rate = quantity / time

To calculate a unit rate, we need to divide a rate by the quantity being measured. For example, if the rate is the number of miles traveled per hour, the unit rate would be the number of miles traveled in one hour. To find the unit rate, we divide the rate by 1 hour.

The formula for unit rate is:

unit rate = rate / 1

When calculating rates or unit rates, it is important to make sure that the units of the quantities being divided are consistent. If the units are not the same, we need to convert them to the same unit before performing the division.

Therefore, to calculate a rate, divide two quantities with different units; to calculate a unit rate, divide a rate by the quantity being measured.

To know more about rate visit :

https://brainly.com/question/119866

#SPJ1

the perimeter of D'E'F is 5 times larger than the perimeter of DEF.

If the scale from DEF to D'E'F is 5:1, then the corresponding side lengths are multiplied by a factor of 5 when going from DEF to D'E'F. This means that if the perimeter of DEF is P, then the perimeter of D'E'F is 5P.

To see why this is true, consider the perimeter of DEF:

P = DE + EF + FD

When we scale up by a factor of 5, we get:

D'E' + E'F' + F'D' = 5DE + 5EF + 5FD

= 5(DE + EF + FD)

= 5P

learn more about perimeter here:

https://brainly.com/question/30252651

#SPJ4