Answer:
Safety Regulations
Explanation:
hope this helps:)
A 20 kg curling stone is sliding in a positive direction at 4 m/s. A second curling stone is sliding at the same speed but in the opposite direction. What is the kinetic energy of the two stones?
Answer:
The kinetic energy of the two stones is 320 J
Explanation:
Kinetic energy is the energy that a body possesses due to its movement. So it is the capacity or work that allows an object to go from being at rest, or still, to moving at a certain speed.
In other words, the kinetic energy of an object is that which is produced due to its motion and depends on its mass and velocity as follows:
[tex]Ec=\frac{1}{2} *m*v^{2}[/tex]
where the kinetic energy Ec is measured in joules (J), the mass m is measured in kilograms (kg) and the velocity v in meters/second (m/s).
In this case you know that a 20 kg curling stone is sliding in a positive direction at 4 m/s. So:
m= 20 kgv= 4 m/sReplacing you have:
[tex]Ec_{1} =\frac{1}{2} *20 kg*(4\frac{m}{s}) ^{2}[/tex]
Ec₁= 160 J
A second curling stone slides at the same speed but in the opposite direction. So:
m= 20 kgv= - 4 m/sReplacing you have:
[tex]Ec_{2} =\frac{1}{2} *20 kg*(-4\frac{m}{s}) ^{2}[/tex]
Ec₂= 160 J
The kinetic energy of the two stones is calculated as:
Ec= Ec₁ + Ec₂
Ec= 160 J + 160 J
Ec= 320 J
The kinetic energy of the two stones is 320 J
Explain how critical thinking helps scientists analyze information for accuracy and bias.
Answer:
Explain how critical thinking helps scientists analyze information for accuracy and bias.
Explanation:
Critical thinking requires scientists to ask questions about information they come across and assess its validity. This facet of critical thinking helps them avoid bias that originates from personal opinion and helps them distinguish information and fact from common belief.
what are the two main categories of matter
Answer:
pure substances and mixtures
Explanation:
Answer:
Matter can be broken down into two categories. pure substances and mixtures. i hope this helps.
Explanation:
Radar detectors use radio waves to measure the speed of moving
vehicles. Radar detectors have a wavelength of 1.8 meters. What is the frequency of waves from a radar detector?
Answer:
1.7x10^8 Hz
Explanation:
Frequency could be explained as the number of occurrences of a repeating event at a time
Given:
wavelength = 1.8 meters
The frequency f of the waves can be calculated using f = c / λ
Where c (m/s) is the speed of the wave
λ (m) is the wavelength
Speed c= 3*10^8 m/s
Frequency f= 3*10^8 /1.8
Frequency= 1.7x10^8 Hz
Therefore,the frequency of waves from a radar detector is 1.7x10^8 Hz
Which decimal is equivalent to 56?
Answer:
The answer is 0.56
Explanation:
your welcome.
Answer:
The answer is 0.56
Explanation:
i think so
Read the time line. A timeline. The timeline lists the following years: 100 B C E, 1 C E, 100 C E, 200 C E, 300 C E, 400 C E, 500 C E. What time intervals are used on the time line? one year one hundred years five hundred years one thousand years
100 years
There's 100 years in between each listed year.
Answer:
A 100
Explanation:
Which best describes a chain reaction associated with a nuclear reaction?!!
Answer: The statement that describes a chain reaction brought about by a nuclear reaction is "neutrons released during a fission reaction cause other nuclei to split." This is applicable to fission reactions only wherein atoms split and produce neutrons that also cause further atoms to split, thus creating a chain or series of reactions.
plz mark brainliest
If density usually increases with decreasing temperature, why does ice float on liquid water? Explain.
Answer:
If you continue to cool water past 4 degrees Celsius, its density starts to plummet (you can see this in the graph). At zero degrees, i.e., the temperature at which water turns into ice, the density of water is actually quite low. It turns out that ice has a lower density than water, and any object that has a lower density than the liquid form on which it’s kept (in this case, water) will be able to float!
Explanation:
The ice floats in water because the hydrogen bonds in the ice change to negative, and Ice is, therefore, less dense than water because the density of water actually reduces as the temperature drops.
What are ice and water?Ice is the form of water. It is the frozen form of water. It is made up of hydrogen and oxygen.
The hydrogen bonds in water change as it cools, holding the negatively charged oxygen atoms apart and preventing the ice from getting much denser.
Water loses density after 4 degrees Celsius of cooling, therefore don't do it The water's density is actually relatively low at zero degrees, the temperature upon which water transforms into ice.
Thus, as it turns out, ice has a lower density than water, therefore any object will be able to float if its density is lower than that of the liquid state it is kept in.
To learn more about ice and water, refer to the below link:
https://brainly.com/question/11696500
#SPJ2
How might newtons second law relate to an asteriood that is heading toward earth
Answer:
it might be able to get a heading to a earth
Daniel needed 5.0 x 10 3mm of copper wire for his senior year science project. When Daniel went to the hardware store, he noticed that the unit of measure used for the wire was meters. Calculate the length, in meters, of copper wire Daniel needed for his project.
Answer:
if its 5X 10^3 mm=5m and if its 5X 10^-3 mm=5X 10^-6m
Explanation:
we know,
1m= 1000mm
as given 5X 10^3 mm we have to convert to meter
now 5X 10^3 mm= 5X 10^3/1000=5m
but if its 5X 10^-3 mm= 5X 10^-3/1000= 5X 10^-6m
thank u,
Which of the following questions can be answered by science? (5 points)
Answer:
you didn't put the question
Explanation:
??
Answer:
I. Why is land use more important than water use?
II. Why do human activities affect land?
Explanation:
*
Which of the following is classified as an element?
a. H20
b. Carbon
c. all of the above
d. Tea
Answer:
c is the answer because everything is an element
List two things that do not change between isotopes of an element
Answer:
Explanation:
Because different isotopes have different numbers of neutrons, they do not all weigh the same or have the same mass. Different isotopes of the same element have the same atomic number. They have the same number of protons. The atomic number is decided by the number of protons.
Answer:
Because different isotopes have different numbers of neutrons, they do not all weigh the same or have the same mass. Different isotopes of the same element have the same atomic number. They have the same number of protons. The atomic number is decided by the number of protons.
Round the number 3456.5 to two significant figures.
Explanation:
35- this is the answer in 2s.f
When rounding a number to two significant figures, we consider the first two most significant digits from the left. In this case, the number is 3456.5. 3456.5 rounded to two significant figures is 3500.
Rounding numbers is a common mathematical process used to simplify or approximate values to a desired level of precision. It involves adjusting a number to a specific decimal place or significant figure.
To round 3456.5 to two significant figures, we look at the first two digits: 34.
The next digit after the second significant digit is 5. Since 5 is greater than or equal to 5, we round up the last significant digit.
Therefore, rounding 3456.5 to two significant figures gives us:
3500
So, 3456.5 rounded to two significant figures is 3500.
For more details regarding rounding numbers, visit:
https://brainly.com/question/29261078
#SPJ6
Is 4H2O an organic molecule ?
Answer:
it is an organic molecule
Explanation:
it's a compound called chromium, phosphate tetrahydrate, where tetra stands for 4 , as there are four water molecules attached to the compound.
By using constants in an experiment, you can make sure that you are testing only one
A)experiment
B)variable
C)hypothesis
D)order
What is importance of thermometer?
What substance is produce when hydrogen burn?...
Answer:
Water
Explanation:
hydrogen + oxygen = water
Calculate the mass of water if the densityis 1.02 g/mL and the volume is 62 ml. M = (D(V)
.016 mL
60.78 mL
63.24 mL
73.24 mL
Answer:
The answer is
63.24 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume = 62 mL
density = 1.02 g/mL
The mass is
mass = 1.02 × 62
We have the final answer as
63.24 gHope this helps you
7. A square chunk of plastic has a length of 5 cm, width of 5 cm and height of 5 cm. It has a mass of 200 g. What is its density?
Answer:
[tex]d=1.6\ g/cm^3[/tex]
Explanation:
Given that,
The dimension of a square chunk of plastic is 5 cm × 5 cm × 5 cm
Mass, m = 200 g
We need to find its density
Density = mass/volume
It will form a cube. It volume = side³
So,
[tex]d=\dfrac{200\ g}{5^3\ cm^3}\\\\d=1.6\ g/cm^3[/tex]
Hence density is [tex]1.6\ g/cm^3[/tex]
A hypothesis is based on the analysis of data collected in a controlled
experiment.
True
False
Been struggling with this question for a while, some help will be appreciated :)
Write the noble gas configuration for nickel
Answer:
[Ar] 3d⁸ 4s²
Explanation:
Atomic number: 28
Symbol: Ni
Atomic mass: 58.6934 u
To get a 4 suggest a way to improve the accuracy or precision of the finding
.
What is the name of the ionic compound LigPO,?
lanthanum phosphide
lanthanum phosphide
lithium phosphate
lanthanum phosphate
lithium phosphate hope this helps
What should be the very last function performed in the lab before you leave?
a) Bid the instructor farewell
b) Make sure that your locker is secure
c) Wash your hands
d) Arrange a time with your lab partner for lunch
Answer:
c) Wash your hands
Explanation:
A laboratory or most popularly called as lab is a place or facility which provides controlled conditions where some educational research, scientific studies, experiments, testings, can be performed. The place is equipped with sophisticated machines, test samples, hazardous chemicals, instruments etc.
The university or college lab, there is a incharge of the lab called as the lab instructor who is responsible for all the belongings of the lab and the safety of the experimenter or the students.
After performing some experiments or testing with some chemicals, the last and the most important thing we need to do is to wash our hand with soap or hand wash. it is very important because we touch many test samples and hazardous chemical which might go inside our mouth or eyes accidentally, which might be harmful to us.
So, it is important to wash our hand at last before leaving the lab.
A different student is given a 10.0g sample labeled CaBr2 that may contain an inert (nonreacting) impurity. Identify a quantity from the results of laboratory analysis that the student could use to determine whether the sample was pure.
Answer:
Mass of Ca in sample, Mass of Br in sample, Number of moles of Ca in sample, Number of moles of Br in sample, Mass or moles of element other than Ca or Br in sample
Explanation:
The AP Classroom will not count your answer to this question as correct unless it includes at least one of the answers listed above. If you say that theanswer to this question is density, it will be marked as incorrect, I found that out the hard way when I used the answers that brainly gave me.
Good luck,
I applaud you for using the sources avalible to you, which is /definetly not/ cheeting.
Elements on the right side of the Periodic Table are mostly in what state of matter?
[tex]\huge\mathfrak\red {Answer:}[/tex]
Elements on the right side of the periodic table are mostly Non - metals.
And Nonmetals exist in all three states of matter. The majority are gases, such as nitrogen and oxygen. Bromine is a liquid. A few are solids, such as carbon and sulfur.
[tex]\mathfrak\purple {Hope\: this\: helps\: you...}[/tex]
ANSWER PLEASE ..Which property of an element would be MOST helpful in determining its column in
the periodic table?
The column number of an element in the periodic table is generally determined on the basis of the number of valence electrons. The elements in the same column have similar chemical properties.
What are valence electrons?The electrons present in the outermost shell of an atom which take part in chemical reactions are called the valence electrons. These electrons are responsible for the interaction between the atoms and the formation of chemical bonds.
The valence electrons of an atom also gives us an idea about the chemical properties of elements like valency, the number of unpaired electrons present, etc. The column number of an element is mainly determined on the basis of number of valence electrons.
The elements are placed in vertical columns in the periodic table. There are 2 electrons in the outermost shell of Alkaline earth metals. So they belong to second column.
Thus it is the valence electron which determines the column number.
To know more about valence electrons, visit;
https://brainly.com/question/28977387
#SPJ6
Question
The measure of molecular movement is known as
dew point
temperature
condensation
evaporation