A pendulum that was originally erected by Foucault at the Pantheon in Paris for the Paris Exhibition in 1851 was restored in 1995. It has a 28.0 kg sphere suspended from a 67.0-m light cable. If the amplitude of the swing is 5.00 m, what is the maximum speed of the sphere

Answers

Answer 1

Answer:

13.1 m/s

Explanation: Given that a pendulum that was originally erected by Foucault at the Pantheon in Paris for the Paris Exhibition in 1851 was restored in 1995. It has a 28.0 kg sphere suspended from a 67.0-m light cable. If the amplitude of the swing is 5.00 m, what is the maximum speed of the sphere

The formula to use is :

W = sqrt ( L/g )

Where

L = 67m

g = 9.8m/s^2

A = 5m

Substitute all the parameters into the formula

W = sqrt ( 67 / 9.8 )

W = 2.6

To get the maximum velocity, we use the below formula.

V = wA

V = 2.6 × 5

V = 13.07 m/s

Therefore the maximum speed of the sphere is 13.1 m/s approximately.


Related Questions

A wooden block meauring 40cm x 10cm x 5cm has a mass 850gm . find the density of wood?
please answer me.​

Answers

Answer:

Explanation:

Density = Mass / Volume = 850 / 40*10*5 = 0.425 g /cm^3


Gold-198 is a radioactive isotope, and it has a half-life of about 2.5 days.
You have 100 grams of Gold-198. How many grams remain after 20 days?

3.125 grams
1.5625 grams
0.78125 grams
0.390625 grams

Answers

Answer: 0.390625 grams

Explanation:

A half-life of an element is the amount of time that it takes for half the mass of the element to decay.

Gold-198 having a half-life of 2.5 days therefore means that every 2.5 days, the mass is cut in half.

If there are 20 days, find out how many half-life periods there are:

= 20 / 2.5

= 8 periods

The half life is:

= Original mass * 0.5^number of half-life periods

= 100 * 0.5⁸

= 0.390625 grams

A proton traveling due north enters a region that contains both a magnetic field and an electric field. The electric field lines point due west. It is observed that the proton continues to travel in a straight line due north. In which direction must the magnetic field lines point

Answers

Answer:

upward

Explanation:

In the electromagnetic system of force if the direction of motion of proton does not changes it means that the electric and magnetic forces are such a ways that they are cancelling each other's effect.

Since, electric field lines will exert a force on the proton to the west, hence, the magnetic force must force it to the east. It is well known that magnetic force acts perpendicular to the direction of magnetic field.  magnetic field should point upward direction.

Which element would have properties most like helium (He)?

A. Ar
B. Hg
C. H
D. O

Answers

i believe the answer is d

Answer: A. Ar

Explanation: not anything else besides Ar

A 7.5 cm tall Aragorn action figure is placed 12.4 cm in front of a double convex lens. If the image of Aragorn is located 7.5 from the lens, what is the focal length of the lens?

Answers

Answer:

f = 4.67 cm

Explanation:

Here, we can use the thin lens formula, as follows:

[tex]\frac{1}{f}= \frac{1}{p}+ \frac{1}{q}\\\\[/tex]

where,

f = focal length of lens = ?

p = distance of object from lens = 12.4 cm

q = distance of image from lens = 7.5 cm

Therefore,

[tex]\frac{1}{f} =\frac{1}{12.4\ cm} +\frac{1}{7.5\ cm}\\\\\frac{1}{f} = \frac{1}{4.67\ cm}[/tex]

f = 4.67 cm

Two electromagnetic waves are traveling through empty space. The wave with the greater wavelength is also characterized by _____.

a. the lower frequency
b. the higher frequency
c. the faster speed
d. the slower speed

Answers

B is the answer the higher the frequency

A physics student mounts two thin lenses along a single optical axis (the lenses are at right angles to the line connecting them, and they appear concentric when viewed from either end). The lenses are identical, each with a positive (converging) focal length of 14.8 cm. They are separated by a distance of 39.4 cm. Lens 1 is to the left of Lens 2.

Required:
a. What is the final image's distance (in cm) from Lens 2?
b. Where is the final image located?
c. What is the overall magnification of the lens pair, considered as a single optical instrument?

Answers

Answer:

A)    q₂ = 75.98 cm, B)     q₂' = 115.38 cm, C)

Explanation:

A) This is an exercise in geometric optics, as the two lenses are separated by a greater distance than their focal lengths from each lens, they must be worked as independent lenses.

Lens 1. More to the left

let's use the constructor equation

         [tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]

where f is the focal length, p and q are the distance to the object and the image, respectively,

We must assume a distance to the object to perform the calculation, suppose that the object is 50 cm from lens 1 that is further to the left of the system.

          [tex]\frac{1}{q_1} = \frac{1}{f} - \frac{1}{p}[/tex]

         [tex]\frac{1}{q_1} = \frac{1}{14.8} - \frac{1}{50}[/tex]  

          1 / q₁ = 0.04756

           q₁ = 21.0227 cm

this image is the object for the second lens that has f₂ = 14.8 cm

the distance must be measured from the second lens

          p₂ = 39.4 -q₁

          p₂ = 39.4 -21.0227

          p₂ = 18.38 cm

let's use the constructor equation

            1 / q₂ = 1 / f - 1 / p2

             

             [tex]\frac{1}{q_2} = \frac{1}{14.8} - \frac{1}{18.38}[/tex]

            [tex]\frac{1}{q_2}[/tex] = 0.01316

            q₂ = 75.98 cm

measured from the second lens

B) the position of the final image with respect to the first lens is

            q₂’= q₂ + 39.4

             q₂'= 75.98 +39.4

              q₂' = 115.38 cm

C) the magnification of a lens is

              m = - q / p

in this case the image measured from lens 2 is q2 = 75.98 cm

the distance to the object from the first lens is p1 = 50cm

          m = - 75.98 / 50

          m = -1.5 X

the negative sign indicates that the image is inverted

A cylindrical space colony 8.00 km in diameter and 30.0 km long has been proposed as living quarters for future space explorers. Such a habitat would have cities, land, and lakes on the inside surface and air and clouds in the center. All this would be held in place by the rotation of the cylinder about the long axis. How fast would such a cylinder have to rotate to produce a 1-g gravitational field at the walls of the cylinder

Answers

Answer:

ω = 0.05 rad/s

Explanation:

In order to produce the acceleration equal to the acceleration due to gravity at the surface of Earth, the centripetal acceleration must be equal to the value  of g:

[tex]a_c = g\\g = \frac{v^2}{r}\\\\but,\ v=r\omega\\therefore,\\\\g = \omega^2r\\\\\omega = \sqrt{\frac{g}{r}}[/tex]

where,

ω = angular speed = ?

g = acceleration due to gravity on the surface of the Earth = 9.81 m/s²

r = radius of cylinder = 8 km/2 = 4 km = 4000 m

Therefore,

[tex]\omega = \sqrt{\frac{9.81\ m/s^2}{4000\ m}}[/tex]

ω = 0.05 rad/s

I will mark u brainlist

Answers

The dog does not go through metamorphosis.

Answer:

DragonFly or a dog

Explanation:

What is the typical pH of acid rain?

Answers

Answer:

5.0-5.5 is the answer to your question

Why does a transformer require alternating volt age?
1. Alternating voltage leads to electromagnetic induction which is necessary for the transformer to work.
2. Due to economic reasons; alternating voltage is cheaper to produce.
3. If we apply a constant. voltage to the primary coil, it will burn out due to short circuit.
4. No specific reason; the constant voltage would work just as well.
5. The magnetic field produced by the primary coil can reach the secondary coil more easily.
6. Energy can be transferred more efficiently if alternating voltage is used.

Answers

Answer:

Alternating voltage leads to electromagnetic induction which is necessary for the transformer to work.

Explanation:

According to Oxford dictionary; an alternating current is "an electric current that reverses its direction many times a second at regular intervals".

A transformer works on the principle of electromagnetic induction. A transformer requires an alternating current which can create a changing magnetic field leading to induced voltage in the coil.

Hence, a transformer requires alternating voltage because alternating voltage leads to electromagnetic induction which is necessary for the transformer to work.

from
Which energy transformation is correct?
O From A to C, kinetic energy is transformed into
gravitational potential energy.
O From C to D, kinetic energy is transformed into
gravitational potential energy.
O From C to E, gravitational potential energy is
transformed into kinetic energy.
O From D to E, gravitational potential energy is
transformed into kinetic energy.

Answers

B. The energy transformation that is correct is From C to D, kinetic energy is transformed into gravitational potential energy.

What is law of conservation of energy?

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

Energy transformation in the pendulum;

At point A, there's only gravitational potential energy and no kinetic energy, because the pendulum is at rest at A.  At point C, it has maximum speed since all of the potential energy is transformed into kinetic energy. Therefore, at this point there is only kinetic energy and no potential energy.At point E, it is the same as at point A, but in opposite side. So, at this point there is no kinetic energy.At  points B and D there are both kinetic and potential energy. At point B the kinetic energy is increasing and at point D it is decreasing.

Thus, the energy transformation that is correct is From C to D, kinetic energy is transformed into gravitational potential energy.

option B is the correct answer.

Learn more about energy transformation here: https://brainly.com/question/2667612

#SPJ1

Answer:

B is Correct

Explanation:

From C to D, kinetic energy is transformed into gravitational potential energy.

Explain what happens during stages A and B.

Answers

Is there a picture?

The first law of thermodynamics (which states that energy is conserved) does not specify the direction in which thermodynamic processes in nature can spontaneously occur.

a. True
b. False

Answers

Answer:

a. True

Explanation:

The law of conservation of Energy states that energy cannot be destroyed but can only be converted or transformed from one form to another. Therefore, the sum of the initial kinetic energy and potential energy is equal to the sum of the final kinetic energy and potential energy.

Mathematically, it is given by the formula;

Ki + Ui = Kf + Uf .......equation 1

Where;

Ki and Kf are the initial and final kinetic energy respectively.

Ui and Uf are the initial and final potential energy respectively.

The First Law of Thermodynamics is another way to describe the Law of Conservation of Energy. Typically, the First Law of Thermodynamics states that the change of internal energy of a system is equal to the sum of external work and heat spent on the system.

Mathematically, the First Law of Thermodynamics is given by the formula;

ΔU = Q − W

Where;

ΔU represents the change in internal energy of a system.

Q represents the net heat transfer in and out of the system.

W represents the sum of work (net work) done on or by the system.

Hence, the direction in which any thermodynamic process in nature can spontaneously occur isn't stated by the First Law of Thermodynamics.

The table shows the relationship between the masses of two objects, the distance between the two objects, and the gravitational force between the objects. A 4-column table with 5 rows. The first column labeled Mass of Object 1 (kilograms) has entries 1, 2, 2, 3, 9. The second column labeled Mass of Object 2 (kilograms) has entries 1, 1, 2, 3, 3. The third column labeled Distance between Objects 1 and 2 (meters) has entries 1, 1, 2, 1, 3. The fourth column labeled Gravitational Force Objects 1 and 2 (Newtons) has entries 1 G, 2 G, 1 G, 9 G, 3G. Which conclusion is supported by the data in the table? An increase in the mass of an object causes the same decrease in the gravitational force. An increase in the distance between the objects causes the same decrease in the gravitational force. An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass. An increase in the mass causes a greater change in the gravitational force than the same increase in the distance between the objects. Brainlyest for correct answer!

Answers

Answer:

C

Explanation:

edge 2020... Using elimination it's the only one that makes sense.

The statement third "an increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass" is correct.

What is gravitational force?

The gravitational force is a force that attracts all mass-bearing objects. The gravitational force is referred to as attractive because it always strives to pull masses together rather than pushing them apart.

As we know, the gravitational force is given by:

[tex]\rm F = \dfrac{Gm_1m_2}{r^2}[/tex]

Where, G is the gravitational constant.

m1 and m2 are masses.

r is the distance between the masses.

From the data given in the table, shows that:

The gravitational force is indirectly proportional to the square of the distance.

Thus, the statement third "an increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass" is correct.

Learn more about the gravitational force here:

https://brainly.com/question/12528243

#SPJ2

What is an electron?


(it’s D lol)

Answers

Answer:

D

Explanation:

A wave has a speed of 450 m/s and a frequency of 5 Hz. What is its wavelength?
Give you answer to a 1 decimal place.
Your Answer:​

Answers

Answer

the wavelength is 90

Explanation:

Say the turbine is 10 feet in diameter (that's the radius of the dashed circle). Also say that the coil has 100 turns and has a square cross-section with a length of 10 feet and a height of 6 feet. Say that the magnetic rotor has the same height but is only 2 feet wide, it has a magnetic field strength is 0.1T, and it is rotating at 60Hz (note this is not the angular frequency). A typical turbine supplies 10kW of power. Use Faraday's law to find the induced emf in the coil and the amount of induced current.

Answers

Answer:

a. ε = 21,014sin(120πt) V

b. 0.476cosec(120πt)  

Explanation:

a. Induced emf

We know the induced emf, ε = -dΦ/dt where Φ = magnetic flux through coil = NABcosθ where N = number of turns of coil =, 100, A = area of coil = 10 ft × 6 ft = 60 ft² = 60 × 1 ft² = 60 × (0.3048)² m² = 5.574 m², B = magnetic field strength = 0.1 T and θ = angle between B and normal to A = ωt.

So, Φ = NABcosθ = 100 × 5.574 m² × 0.1 T cosθ  = 55.74cosθ Tm²

So, ε = -dΦ/dt = ε = -d(55.74cosθ Tm²)/dt = -d(55.74cosθ Tm²)/dθ × dθ/dt = -55.74 ×(-sinθ) Tm²)/dθ × ω (ω = dθ/dt = angular frequency of shaft = 2πf where f = frequency of rotor = 60 Hz )

ε = 55.74sinθ Tm²) × 2πf

ε = 55.74sinθ Tm²) × 2π(60 Hz)

ε = 6689πsinθ V

ε = 21,014sinθ V

ε = 21,014sinωt V

ε = 21,014sin(2πft) V

ε = 21,014sin(2π(60 Hz)t) V

ε = 21,014sin(120πt) V

b. Current in coil

Since power P = Iε where I = current and ε = induced emf = 21,014sinθ V.

Since power, P = 10 kW = 10000 W

I = P/ε

= 10000 W/21,014sinθ V

= 0.476/sinθ

= 0.476cosecθ

= 0.476cosecωt

= 0.476cosec(120πt)  

The maximum current is obtained when θ = 90°

I =  10000 W/21,014sin90 V

I = 10000 W/21,014 V

I = 0.476 A

I = 476 mA

The tension in a pulley belt is 31 N when stationary. Calculate power in watts transmitted when the belt is on the point of slipping on the smaller wheel. the wheel is 379 mm diameter and the coefficient of friction is 0.3. The angle of lap is 1610. The wheel speed is 1,547 rev/min.

Answers

Answer:

P = 756.84 Watts

Explanation:

As the tension is stationary or innitial, T₀ = 31 N, the mean would be:

T₁ + T₂ / 2 = T₀    (1)

T₁ + T₂ = 2 * 31 = 62 N

Now, with the following expression we can determine the linear speed:

V = πWD  (2)

W: angular speed of the wheel  (rev/s)

D: diameter of the wheel (in meters)

W = 1547 rev/min * (1 min/60 s) = 25.78 rev/s

V = π * 25.78 * 0.379 = 30.695 m/s

We also know that:

T₁ / T₂ = exp (μθ)

T₁ = T₂ exp(μθ)   (3)

We already have those values so replacing:

T₁ = T₂ exp(0.3 * 161 * π/180)

T₁ = 2.32T₂   (4)

We can now replace (4) in (1) like this:

T₁ + T₂ = 62 N

2.32T₂ + T₂ = 62

3.32T₂ = 62

T₂ = 18.67 N

Which means that T₁:

T₁ = 2.32(18.67)

T₁ = 43.33 N

Finally, the power can be determined using the following expression:

P = (T₁ - T₂)V  (5)       Replacing we have:

P = (43.33 - 18.67)*30.695

P = 756.84 Watts

Hope this helps

Wha is the definition of health?

Answers

a person's mental or physical condition.

A 70 kg human body typically contains 140 g of potassium. Potassium has a chemical atomic mass of 39.1 u and has three naturally occurring isotopes. One of those isotopes, 40K (potassium), is radioactive with a half-life of 1.3 billion years and a natural abundance of 0.012 %. Each 40K (potassium) decay deposits, on average, 1.0 MeV of energy into the body.
What yearly dose in Gy does the typical person receive from the decay of 40K (potassium) in the body? Express your answer using two significant figures.

Answers

Answer:

Gy = 3.14x10⁻⁴ Gy

Explanation:

To get the dose in Gy we need to use the following expression:

Gy = E / m  (1)

Where:

Gy: dose

E: energy absorbed per atom

m: mass of the human body.

We don't have the energy per atom, but we can calculate that by following the next procedure.

First, let's determine the number of atoms of potassium in our body. For that we need to determine the moles in the 140 g of potassium, with the molecular mass and then, use the avogadro's number:

moles = m/MM

moles = 140 / 39.1 = 3.58 moles

N° atoms = 3.58 * 6.02x10²³ atoms = 2.16x10²⁴ atoms of K.

The abundance of the ⁴⁰K is 0.012% so the atoms of this isotope would be:

N = 2.16x10²⁴ * (0.012/100) = 2.59x10²⁰ atoms of ⁴⁰K.

With this number, and the half life rate, we can determine the number of decay atoms in a year (λ) using the following expression:

λ = ln2 / t(1/2)

λ = ln2 / 1.3x10⁹ = 5.33x10⁻¹⁰ year⁻¹

This number, multiplied by the number of atoms:

R = 5.33x10⁻¹⁰ * 2.59x10²⁰ = 1.38x10¹¹ atoms/year

Now, each atom of K gives an average energy of 1 MeV, so with the atoms we have:

E = 1.38x10¹¹ * 1x10⁶ eV = 1.38x10¹⁷ eV

This value can be expressed in Joules so:

E = 1.38x10¹⁷ eV * (1 J / 6.24x10¹⁸ eV) = 0.022 J

Finally, we can use (1) to get the dose in Gy:

Gy = 0.022 / 70

Gy = 3.14x10⁻⁴ Gy

Hope this helps

two spheres of radii 5cm and 3cm are given charges on risk volume and 50 calling respectively and then connected by a wire calculate the loss of energy after connection​

Answers

Answer:

Solution given:

Radius of small sphere[r]=5cm=0.05m

Radius of large sphere[R]=10cm=0.1m

capacitance of small sphere[c]=4πε0r

=[tex]4π*8.85×10^{-12}×0.05=5.56*10^{-12}F[/tex]

Charge for small sphere[Q1]=100C

Charge for small sphere[Q2]=50C

Potential difference [V1]=[tex] \frac{charge}{capacitance}=\frac{100}{5.56*10^{-12}}=1.8×10^{13}[/tex]V

.

again

capacitance of small sphere[C]=4πε0R

=[tex]4π*8.85×10^{-12}×0.1=1.11*10^{-11}F[/tex]

Potential difference [V2]=[tex] \frac{charge}{capacitance}=\frac{50}{1.11*10^{-11}}=4.5×10^{12}[/tex]V

Now

Loss of energy:

[tex] \frac{cC(V1-V2)^{2}}{2(c+C)}[/tex]

=[tex] \frac{5.56*10^{-12}*1.11*10^{-11}(1.8*10^{13}-4.5*10^{12})^{2}}{2(5.56*10^{-12}+1.11*10^{-11})}[/tex]

=25Joule

What is the resistance of a rheostat coil, if 0.05 A of current flows through it when 6 V is applied
across it? 1200

Answers

Answer:

i have no idea i came here to find out too :(

Explanation:

Which of the following is NOT a reason why humans sleep?

Sleep helps to restore and repair brain tissue.

Sleep restores and rebuilds memories.

Sleep provides a psychic safety valve to discharge unacceptable feelings.

During sleep, growth hormone is released, especially in children.

Answers

Answer and Explanation:

The answer is the second answer choice. This is because we humans can rebuild or build memories during the day, it doesn't have to happen via sleep.

The first answer choice IS a reason because you aren't working your brain as hard, so your brain has time to heal. A mouse study suggests that sleep helps restore the brain by flushing out toxins that build up during waking hours.

The third answer choice IS a reason because of the idea of Wish Fulfillment: Sigmund Freud suggested that dreams provide a psychic safety valve to discharge unacceptable feelings. The dream's manifest (apparent) content may also have symbolic meanings (latent content) that signify our unacceptable feelings.

The forth answer choice IS a reason because of the idea of Cognitive Development: Some researchers argue that we dream as a part of brain maturation and cognitive development.

#teamtrees #PAW (Plant And Water)

His eyes are 1.83 m above the floor, and the top of his head is 0.15 m higher. Find the height above the floor of the top and bottom of the smallest mirror in which he can see both the top of his head and his feet.

Answers

Answer:

 y_lower = 0.915 m,   y_superior = 1,905 m

Explanation:

In this exercise we use the law of reflection for a flat mirror.

         θ’= θ

To see the feet of the person a ray of light that part of them must reach the bottom of the mirror and its reflection has to reach the eyes.

As the law of reflection the incident and reflected angles are equal, the distance from the floor to the point where the two rays (incident and reflected) touch the mirror must be symmetrical, oses from the floor

           y = 1.83 / 2

           y = 0.915 m

To see the head, a ray of light that comes from the tip of the head and is reflected in the mirror must reach the eyes. As the head is 0.15 m above the eyes and the incident and reflected rays have the same angle, the mirror must be at half the height, that is, the mirror is 0.075 m below the tip of the head.

In summary

* the bottom of the mirror is 0.915 m from the ground

* the top of the mirror is at 1.83 + 0.075

                 y_superior = 1,905 m

ground

Besides ethical considerations, what is another reason why Milgram’s experiment may be difficult to duplicate?

Answers

Last month, we featured IRB best practices (“IRBs: Navigating the Maze” November 2007 Observer), and got the ball rolling with strategies and tips that psychological scientists have found to work. Here, we continue the dissemination effort with the second of three articles by researchers who share their experiences with getting their research through IRB hoops. Jerry Burger from Santa Clara University managed to do the seemingly impossible — he conducted a partial replication of the infamous Milgram experiment. Read on for valuable advice, and look for similar coverage in upcoming Observers. These are the first words I said to Muriel Pearson, producer for ABC News’ Primetime, when she approached me with the idea of replicating Stanley Milgram’s famous obedience studies. Milgram’s work was conducted in the early 1960s before the current system of professional guidelines and IRBs was in place. It is often held up as the prototypic example of why we need policies to protect the welfare of research participants. Milgram’s participants were placed in an emotionally excruciating situation in which an experimenter instructed them to continue administering electric shocks to another individual despite hearing that person’s agonizing screams of protest. The studies ignited a debate about the ethical treatment of participants. And the research became, as I often told my students, the study that can never be replicated. Hope this helps!

A 400 kg satellite is in a circular orbit at an altitude of 500 km above the Earth's surface. Because of air friction, the satellite eventually falls to the Earth's surface, where it hits the ground with a speed of 1.60 km/s. How much energy was transformed into internal energy by means of air friction

Answers

Answer:

E = 1.45 x 10⁹ J = 1.45 GJ

Explanation:

According to the law of conservation of energy:

Potential Energy Lost by Satellite = Kinetic Energy + Internal Energy

[tex]mgh = \frac{1}{2} mv^2 + E\\\\E = mgh - \frac{1}{2} mv^2[/tex]

where,

E = Internal Energy = ?

m = mass = 400 kg

g = acceleration due to gravity = 9.81 m/s²

h = height = 500 km = 500000 m

v = speed on ground = 1.6 km/s = 1600 m/s

Therefore,

[tex]E = (400\ kg)(9.81\ m/s^2)(500000\ m)-\frac{1}{2} (400\ kg)(1600\ m/s)^2\\E = 1.962\ x\ 10^9\ J - 0.512\ x\ 10^9\ J[/tex]

E = 1.45 x 10⁹ J = 1.45 GJ

The load across a 12 V battery consists of a series combination of three resistors 34 Ω, 42Ω, and 30Ω. What is the total resistance of the load? Answer in units of Ω. What is the current in the circuit? Answer in units of A.

Answers

Answer:

The total resistance is 106 Ω and the current in the circuit is 0.11 A.

Explanation:

Given that,

Voltage of the battery, V = 12 V

Resistors 34 Ω, 42Ω, and 30Ω are connected in series.

The total resistance is given by :}

R = 34 + 42 +30

= 106Ω

Let I is the total current in the circuit. Using ohm's law to find it such that,

[tex]I=\dfrac{V}{R}\\\\I=\dfrac{12}{106}\\\\I=0.11\ A[/tex]

Hence, the total resistance is 106 Ω and the current in the circuit is 0.11 A.

The lens labelled (B) has radius 16.5cm on the curved side. Using the shape of the lens to assign the sign of the radius, calculate the focal length of the lens. Give your answer with the correct positive or negative sign using the usual convention for lenses.

Answers

Answer:

convex       f = 33 cm

concave     f = -33 cm

Explanation:

In geometric optics the focal length of a lens is given by

         [tex]\frac{1}{f} = ( n-1) \ (\frac{1}{R_2} - \frac{1}{R_1} )[/tex]

where n is the refractive index of the medium, R₁ and R₂   are the focal lengths on each side of the lens.

In this case one of the sides is flat so its focal length is infinite, if the lens is convex the focal length is positive, convergent lens and if it is concave the focal length is negative, divergent lens.

         [tex]\frac{1}{f} = (n-1) \ \frac{1}{R}[/tex]

the refractive index of the glass is n = 1.5

let's calculate

         1 / f = (1.5 -1) 1 / 16.5

         1 / f = 0.03030

          f = 33 cm

convex       f = 33 cm

concave     f = -33 cm

In any given wave, when the frequency of the wave doubles (f = 2f), which of the following other changes would also take place?
A The wavelength would double (λ = 2λ).
B The velocity would double (v = 2v).
C The wavelength would be half (λ = λ/2).
D The velocity would be half (v = v/2).

Answers

Answer:

The correct answer is -

B. The velocity would double (v = 2v).

C. The wavelength would be half (λ = λ/2).

Explanation:

A wave has a speed or velocity that is related to the wavelength of the wave and the frequency of the wave and this relationship can be represented by the following equation-

Wave velocity V = Wavelength (λ) * Frequency (f)

Frequency (f) = Velocity (V) / Wavelength(λ).

The frequency and wavelength are inversely proportional and frequency and velocity are directly proportional to each other.

So, if f = 2f then,

putting value in the formula,

2f = 2v/λ, which means, f = 2v and f = λ/2

when the frequency is doubled, the wavelength will be halved and velocity will be doubled.

Other Questions
DIRECTIONS: Classify the following unbalanced chemical equations according to the six typesof chemical reactions. Write your answer on the space provided for each number.1. NaOH + KNO3 NaNO3 + KOH 2. CH4 + O2 CO2 + 2H2O 3. Fe + NaBr FeBr3 + Na 4. CaSO4 + Mg(OH)2 Ca(OH)2 + MgSO4 5. NH4OH + HBr H2O + NH4Br 6. P4 + O2 P2O47. NaNO3 NaNO2 + O2 8. C18H18 + O2 CO2 + H2O 9. H2SO4 + NaOH NaSO4 +H2O 10.NiSO4 + Li3PO4 Ni3(PO4)2 + Li2SO4 Please help me with this homework show me how you get it and the answer HELP PLEASE!! Explain the error in the following exercise;then correct it. What are two meanings of the multiple-meaning word close?things you wearnearbyto shut(multiple chioce choose 2)to finish a deal Which sentence in the passage uses parallel structure?Online learning is constantly evolving as learning trends change. Over the last decade, many schools adopted online learning managementsystems so students can receive personalized assignments and for completing assignments outside of the classroom. Now, there is a push forstimulations and virtual reality. Some tech savvy educators believe that virtual reality is beneficial to content areas such as biology, physics, andhistory. These educators say that virtual reality will help students experience historical events, experience conducting experiments, and interactwith other students in real-life situations. Activity: Write Plural or singular next to the sentenceSimple Present Tense Sentences (25 Examples)1. My fathergoes gym every day. ) 15. My teacher sometimes forgets his keys :(to2. She loves to play basketball.216. I like ice-cream)3. She thinks he is very handsome.(.) 17. The students wear their uniforme4. I run every weekend C Singular)18. It smells very delicious in the kitchen(5. We play tennis every morning.19. Alex brushes her teeth twice a day6. Does he write an email?:)20. He gets up early every day-7. They talk too much.21. They speak English in USA. FOR 10o POINTS!!Which type of figurative language is shown in the sentence below?The kettle screamed as the water boiled furiously. geometry question will give brainly!! What would happen to zygote if the egg and sprem cells weren't formed with the correct number of chromosomes? Help I need to make this number into a fraction Ill give brainliest Find the volume of a 1 km3 body of water in m3, and select the correct units. Please answer. Thanks. WORTH 30!!!Find the value of tan theta, if cos theta= 4/5; 0< theta < 90 You have a job interview that is 330 miles away. If your average driving speed is 55 miles per hour, how long will it take you to get there? Show your work. Check your answer. Please solve ASAP please Find the the measure of missing angle Regina owns a book store. She sold 87, 94, 91, and 84 books on the first 4 days of this week. Regina wants to have a mean of 90 books sold after 5 days NEED IT FAST C=-7/15 and x=2/5 c-4x write your answer in simplest form Which of the following best supports the below statement?The addition of bike lanes can help improve safety for cyclists, drivers, andpedestrians.Select one:Several communities have implemented bike lane programs to keep cyclists, drivers,and pedestrians safe.Drivers can be dangerous to bikers and bikers can be dangerous to pedestrians,making the safety of all individuals a concern.When bike lanes are installed, cyclists, drivers, and pedestrians can travel safely inseparate areas with reduced chances of collision.Bike lanes will likely make cyclist feel safer and will, therefore, increase the number ofcyclists who use those lanes. please show your work.[tex]Simplify: 2x + (9x 4)[/tex]