Answer:
Approximately [tex]5.5\; \rm N[/tex], assuming that the volume of these two charged objects is negligible.
Explanation:
Assume that the dimensions of these two charged objects is much smaller than the distance between them. Hence, Coulomb's Law would give a good estimate of the electrostatic force between these two objects regardless of their exact shapes.
Let [tex]q_1[/tex] and [tex]q_2[/tex] denote the magnitude of two point charges (where the volume of both charged object is negligible.) In this question, [tex]q_1 = 20 \times 10^{-6}\; \rm C[/tex] and [tex]q_2 = 15 \times 10^{-6}\; \rm C[/tex].
Let [tex]r[/tex] denote the distance between these two point charges. In this question, [tex]r = 0.7\; \rm m[/tex].
Let [tex]k[/tex] denote the Coulomb constant. In standard units, [tex]k \approx 8.98755\times 10^{9}\; \rm kg \cdot m^{3}\cdot s^{-2}\cdot C^{-2}[/tex].
By Coulomb's Law, the magnitude of electrostatic force (electric force) between these two point charges would be:
[tex]\begin{aligned}F &= \frac{k \cdot q_1 \cdot q_2}{r^{2}}\end{aligned}[/tex].
Substitute in the values and evaluate:
[tex]\begin{aligned}F &= \frac{k \cdot q_1 \cdot q_2}{r^{2}}\\ &\approx 8.98755 \times 10^{9}\; \rm kg \cdot m^{3}\cdot s^{-2}\cdot C^{-2} \\ &\quad \times 20\times 10^{-6}\; \rm C\\ &\quad \times 15\times 10^{-6}\; \rm C \\ &\quad \times \frac{1}{{(0.7\; \rm m)}^{2}}\\ &\approx 5.5\; \rm N \end{aligned}[/tex].
A 5.0 kg chunk of putty moving at 10m/s collides and sticks to a 7.0 kg bowling ball that is initially at rest.What is the total momentum of the bowling ball and the putty after they collide?
Answer:
Total momentum = 50kgm/s
Explanation:
Given the following data;
Mass, M1 = 5kg
Mass, M2 = 7kg
Velocity, V1 = 10m/s
Velocity, V2 = 0m/s (since it's at rest).
To find the total momentum;
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = Mass * Velocity [/tex]
The law of conservation of momentum states that the total linear momentum of any closed system would always remain constant with respect to time.
Total momentum = M1V1 + M2V2
Substituting into the equation, we have;
Total momentum = 5*10 + 7*0
Total momentum = 50 + 0
Total momentum = 50 kgm/s
Therefore, the total momentum of the bowling ball and the putty after they collide is 50 kgm/s.
How many centimeters are there in 9.3 meters
Answer:
930 centimeters
Explanation:
Help !!!!!!!!
Please its Urgent.
None can.
A clinical thermometer only measures temperatures above +30°C.
Mercury and alcohol are both frozen solid at -50°C.
What does an electromaget do
Answer:
An electromagnet is a magnet that runs on electricity. Unlike a permanent magnet, the strength of an electromagnet can easily be changed by changing the amount of electric current that flows through it. The poles of an electromagnet can even be reversed by reversing the flow of electricity.
4. A toy car travels 60 m during 5.7 s at a constant speed. What is the speed of the toy car?
15.556
13.526
6.116
10.526
None of these is correct.
Answer: 10.526m/s
Explanation:
The speed of the toy car would be calculated as the distance travelled by the toy card divided by the time taken. This will be:
= Distance travelled / Time taken
= 60/5.7
= 10.526m/s
The speed of the toy car is 10.526 meters per second.
ANSWER QUICK 30 POINTS
What force controls the movement of the planets around the sun, holds together stars grouped in galaxies, and galaxies grouped in clusters? Thoroughly explain your answer, making sure to include an example and describe how this force keeps planets in orbit. Make sure to write at least 3-5 sentences and proper conventions (spelling, grammar, punctuation, etc.) to respond. Put all answers in your own words (pls dont just take my points :( )
Answer:
Gravity creates stars and planets by pulling together the material from which they are made.
Explanation: Thats the only thing i have im stuck on the tga quiz
Jackson throws a football 30 meters at a speed of 15 m/s. How long was the football in the air before Laurence caught it for touchdown
Answer:
2s
Explanation:
Given parameters:
Distance = 30m
Speed = 15m/s
Unknown:
Time before Laurence caught it = ?
Solution:
To solve this problem;
Speed = [tex]\frac{disance }{time}[/tex]
Time taken = [tex]\frac{distance }{speed }[/tex] = [tex]\frac{30}{15}[/tex] = 2s
The time it takes is 2s
Given:
30 metersSpeed of 15 m/sWe will solve:
Speed = [tex]\frac{distance}{time}[/tex]
Time taken = [tex]\frac{distance}{time}[/tex] = [tex]\frac{30m}{15m/s}[/tex] = 2s
The time it takes is 2s
aluminum has a density of 270 kg/m3. what volume of aluminum would have a mass of 49.9 kg?
(unit = m^3)
0.184[tex]m^{3}[/tex] is the answer for Acellus students!
A ____ shows all of the forces acting on an object.
Answer:
Free body diagram
Explanation:
A free body diagram shows all the forces acting on a body. Since force is a vector quantity, the magnitude and direction of the forces are shown in the free-body diagram.
Force is the push or pull on a body.
It can be via contact or without contact. Such non-contact forces acts via a force field.
In physics, this free body diagram is used extensively.
if a 2kg ball has and initial velocity of
4 m/s and is kicked and accelerated to
10 m/s in one second, what is the force that was applied to the ball? Rember that acceleration is the change in velocity/ change in time
please help me asap
Answer:
[tex]\boxed {\boxed {\sf 12 \ Newtons }}[/tex]
Explanation:
Force is equal to the product of mass and acceleration.
[tex]F=m*a[/tex]
We know the mass, but not the acceleration. Therefore, we must calculate it before we can calculate force.
1. Calculate Acceleration
Acceleration is the change in velocity over the change in time.
[tex]a=\frac{V_f-V_i}{t}[/tex]
The final velocity is 10 meters per second and the initial velocity is 4 meters per second. The time is 1 second.
[tex]V_f=10 \ m/s \\V_i= 4 \ m/s \\t= 1 \ s[/tex]
Substitute the values into the formula.
[tex]a=\frac{10 \ m/s-4 \ m/s }{1 \ s}[/tex]
Solve the numerator.
[tex]a=\frac{6 \ m/s}{1 \ s }[/tex]
Divide.
[tex]a= 6 \ m/s/s=6 \ m/s^2[/tex]
2. Calculate Force
Now we know the acceleration and the mass.
[tex]m= 2 \ kg \\a= 6 \ m/s^2[/tex]
Substitute the values into the fore formula.
[tex]F= 2 \ kg * 6 \ m/s^2[/tex]
Multiply.
[tex]F= 12 \ kg*m/s^2[/tex]
1 kilogram meter per square second is equal to 1 Newton. Our answer of 12 kg*m/s² is equal to 12 Newtons[tex]F= 12 \ N[/tex]
The force applies to the ball was 12 Newtons.
A squirrel runs at a speed of 9.9 m, with 25 J of kinetic energy. What is the squirrel’s mass?
Answer:
The mass of the squirrel is 0.51kg
A squirrel runs at a speed of 9.9 m/s with 25 J of kinetic energy.
What is the squirrel’s mass?
Answer: 0.51 kg
From what Tim explains in the movie, what can you infer about the temperature inside a refrigerator?
Answer:
It's closest to 3 degrees celsius
Explanation:
Look at the atoms below
a. Atom W: 9 protons and 9 neutrons
b. Atom X: 8 protons and 9 neutrons
c. Atom Y: 9 protons and 9 neutrons
d. Atom Z: 9 protons and 10 neutrons
Which ones below are isotopes of each other and why?
element z are isotopes because number of netron are different and number of protons are same
Absorption of a light wave occurs in what material?
Answer: I think Windows.
Explanation: The absorption of light makes an object dark or opaque to the wavelengths or colors of the incoming wave: Wood is opaque to visible light. Some materials are opaque to some wavelengths of light, but transparent to others. Glass and water are opaque to ultraviolet light, but transparent to visible light.
Option.D-All materials is the correct answer.
Any object, whether living or inert, has the ability to absorb light. Absorption is always influenced by the electromagnetic frequency of the light being transmitted (i.e., its color) and the composition of the object's atoms.
To learn more Absorption of a light, click here-
https://brainly.com/question/26655381
#SPJ2
4) Which is the BEST description of a tectonic plate? *
O A. Tectonic plates consist of the lithosphere and part of the asthenosphere.
O B.Tectonic plates are large pieces of mesosphere that never move.
C. Tectonic plates are large pieces of lithosphere that move on tope of the
asthenosphere.
O D. None of these answers is correct.
Answer:
The answer is A
Explanation: i took k12
a cellphone weighing 80 g is flying to the air at 15 m/s what is it's kinetic energy
Answer:
9J
Explanation:
Given parameters:
Mass of cell phone = 80g
1000g = 1kg
80g is therefore 0.08kg
Velocity of the cellphone = 15m/s
Unknown:
Kinetic energy of the cellphone = ?
Solution:
The kinetic energy of a body is the energy due to its motion.
It is expressed as:
K.E = [tex]\frac{1}{2}[/tex] mv² = [tex]\frac{1}{2}[/tex] x 0.08 x 15² = 9J
IS IT B!! if not pls helpp!
Answer:
I believe you are correct but we just started this unit
Explanation:
Which type of matter is likely to absorb the most sound waves? A. Metal door B. Loudspeaker C. Hot air O D. Foam wall
Answer:
its either A or D
Explanation:
They use foam walls in like asylums but in the movies all the bad guys say "They can't hear you the metal is too thick" so its either one of those, hope it helped
Sound absorbing foams are typically softer and more lightweight than their sound blocking counterparts. This open and flexible cell structure acts as a natural soundwave absorber and prevents noises from reverberating off hard surfaces like walls, floors and ceilings.
What are sound waves ?"A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium (such as air, water, or any other liquid or solid matter) as it propagates away from the source of the sound. The source is some object that causes a vibration, such as a ringing telephone, or a person's vocal chords."
What is sound ?"Sound is a vibration that propagates as an acoustic wave, through a transmission medium such as a gas, liquid or solid. In human physiology and psychology, sound is the reception of such waves and their perception by the brain."
What is noise ?Sound is defined as vibrations that travel through air or another medium that can be heard when they reach a person's or animal's ears. Noise is defined as unwanted sound. In engineering, noise has the additional connotation of signals varying over time without meaning, whereas sound connotes meaningful signals.
Know more about sound wave here
https://brainly.com/question/11797560
#SPJ2
Body Systems Directly Involved (Give at Least 2)
Cartoon
13. Ouch! You step on a tack and jump away without even thinking. Then you decide to pick up the tack and place it back in a desk drawer.
I need the second one the nervous system and...
Answer:
Nervous system and immune system
Explanation:
The nervous system is involved because you immediately jumped away, that ur brain and nerves initiating the fight or flight response. The immune system is involved because the tack most likely pierced your skin, so your immune system needs to work to make sure the wound does not get infected.
A piece of glass weights 25 g in air, 16.77g in water at 4C and 16.89g in water at 60C. Find the mean coefficient of cubical expansion of water between 4C anf 60C, taking the coefficient of linear expansion of glass as 8*10^6
sorry i think so i dont exactly know i am sorry
Explanation:
As a certain amount of water is cooled from room temperature until it reaches 4 °C, its volume drops. The density reduces as the volume increases below 4 °C. Therefore, water's greatest density occurs at 4 degrees Celsius.
What coefficient of cubical expansion of water?Water has an unusual trait called anomalous expansion, which causes it to enlarge rather than compress when the temperature drops from 4 °C to 0 °C, and it becomes less dense.
At temperatures not far below zero degrees Celsius, water ice is unique for having low coefficients of static and dynamic friction that range from 0.04-0.02, but as the temperature drops, these numbers rise.
Therefore, When a metal sheet's temperature rises by one degree, its coefficient of area expansion is calculated as the increase in surface area per unit of original surface area.
Learn more about coefficient here:
https://brainly.com/question/4709470
#SPJ2
(a) Explain the advantage of using a plane mirror in optical testing.
explain your answer
Answer: Optical test is a test which is used to assess vision and ability of the person to focus on the objects.
Explanation:
The following are the advantages of utilizing plane mirror in optical testing:
1. When a plane mirror is used for testing the image of the test card must be placed at distance equal to the distance of the object.
2. Larger distance in between the object or test card and viewer is obtained. This can help in determining the exact ability of the eye to focus on objects.
A vector
of magnitude 5 units and another vector ū of magnitude 3 units point in directions
differing by 60°. Find out (a) the scalar product of the two vectors and (b) the vector product of the two vectors
Answer:
7.5 units
13 units
Explanation:
[tex]|v|=5\ \text{units}[/tex]
[tex]|u|=3\ \text{units}[/tex]
[tex]\theta[/tex] = Angle between the vectors = [tex]60^{\circ}[/tex]
Scalar product is given by
[tex]u\cdot v=|u||v|\cos\theta\\ =3\cdot 5\cdot \cos60^{\circ}\\ =7.5\ \text{units}[/tex]
The scalar product of the vectors is 7.5 units.
Vector product is given by
[tex]u\times v=|u||v|\sin\theta\\ =3\times 5\sin60^{\circ}\\ =13\ \text{units}[/tex]
The vector product of the vectors is 13 units.
5
A cyclist travels 125 km in 5 hours. How fast is the cyclist moving?
Answer:
25 km/h
Explanation:
speed=distance÷time
125÷5=speed
125÷5=25 (then add units)
Four velcro-lined air-hockey disks collide with each other in a perfectly
inelastic collision. The first disk has a mass of 50.0 g and a velocity of
0.80 m/s to the west, the second disk has a mass of 60.0 g and a velocity of
2.50 m/s to the north, the third disk has a mass of 100.0 g and a velocity of
0.20 m/s to the east, and the fourth disk has a mass of 40.0 g and a
velocity of 0.50 m/s to the south. What is the final velocity of the disks
after the collision?
Answer:
The magnitude of the final velocity is approximately 0.526 m/s in approximately the direction of 8.746° East of South
Explanation:
The given collision parameters are;
The kind of collision experienced by the four velcro-lined air-hockey disk = Inelastic collision
The mass of the first disk, m₁ = 50.0 g
The velocity of the first disk, v₁ = 0.80 m/s West = -0.8·i
The mass of the second disk, m₂ = 60.0 g
The velocity of the second disk, v₂ = 2.50 m/s North = 2.5·j
The mass of the third disk, m₃ = 100.0 g
The velocity of the third disk, v₃ = 0.20 m/s East = 0.20·i
The mass of the fourth disk, m₄ = 40.0 g
The velocity of the fourth disk, v₄ = 0.50 m/s South = -0.50·j
Therefore, the total initial momentum of the four velcro-lined air-hockey disk, [tex]\Sigma P_{initial}[/tex] is given as follows;
[tex]\Sigma P_{initial}[/tex] = m₁·v₁ + m₂·v₂ + m₃·v₃ + m₄·v₄ = 50.0×(-0.80·i) + 60.0×(2.50·j) + 100 × (0.20·i) + 40.0 × (-0.50·j)
∴ [tex]\Sigma P_{initial}[/tex] = -40·i + 150·j + 20·i - 20·j = -20·i + 130·j
∴ [tex]\Sigma P_{initial}[/tex] = -20·i + 130·j
By the law of conservation of linear momentum, we have;
[tex]\Sigma P_{initial} = \Sigma P _{final}[/tex] = -20·i + 130·j
Therefore, given that the collision is perfectly inelastic, the disks move as one after the collision and the four masses are added to form one mass, "m", m = m₁ + m₂ + m₃ + m₄ = 50.0 + 60.0 + 100.0 + 40.0 = 250.0
∴ m = 250.0 g
Let, "v" represent the final velocity of the four disks moving as one after the collision
We have;
[tex]\Sigma P _{final}[/tex] = m × v = 250.0 × v = -20·i + 130·j
∴ v = -20·i/250 + 130·j/250 = -0.08·i + 0.52·j
The final velocity of the four disks after collision, v = -0.08·i + 0.52·j
The magnitude of the final velocity, [tex]\left | v \right |[/tex] = √((-0.08)² + (0.52)²) ≈ 0.526
[tex]\left | v \right |[/tex] ≈ 0.526 m/s
The direction of the final velocity, θ = arctan(0.52/(-0.08)) ≈ -81.254°
The direction of the final velocity, θ ≈ -81.254° which is 8.746° East of South
Calculate speed...
D=40 m
T=10 s
a
40 m/s
b
400 m/s
c
4 m/s
Answer:
c
Explanation:
speed=distance÷time
40÷10=4
10 POINTS QUESTION: Why both are models for monomers, polymers, and cross-linked polymers
Answer:
Because both monomers and polymers and cross linked polymers are mers with physically properties which is good for applycations
Explanation:
because they are good for using and not using
also, this is a 5 point question, you are not fooling anyone. thx for 5 points tho
How much of the matter in the universe is comprised
of atoms?
a. 1%
b. 100%
c. 30%
d. 99%
Answer: I believe the correct answer is A.
Which of these would be the most efficient means to transmit light pulses over long distances?
Answer: It’s fiber optics so B
A cart falls from a track with an acceleration of 10 m/s2 (which is always the acceleration due to gravity). If it falls for 9 seconds before hitting the ground, what is it’s velocity at impact? (show work plz)
Answer:
90m/s
Explanation:
Given parameters:
Acceleration = 10m/s²
Time of fall = 9s
Unknown:
Final velocity = ?
Solution:
We can assume that the cart falls from rest.
Initial velocity = 0m/s
Using
v = u + gt
v is the final velocity
u is the initial velocity
g is the acceleration due to gravity
t is the time
v = 0 + 10 x 9 = 90m/s
Answer:
90m/s
Explanation:
The diagram shows a wave traveling through a medium.
Identify point B.
amplitude
crest
trough
wavelength
The point B represent the crest of the wave. The crest is the peak of the wave. While the trough is the lowest.
What is wavelength?The distance between two successive troughs or crests is known as the wavelength.
The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.
The point B represent the crest of the wave. The crest is the peak of the wave. While the trough is the lowest.
Hence, option B is correct.
To learn more about the wavelength, refer to the link;
brainly.com/question/7143261
#SPJ2