Answer:
The magnitude of the work performed by the mover is 1863 J.
Explanation:
The work can be found using the following equation:
[tex] W = F*d [/tex]
Where:
F: is the force
d: is the displacement = 8.1 m
First, we need to find the net force in the horizontal direction, as follows:
[tex] \Sigma F_{x} = ma = 0 [/tex]
a = 0 since the mover slides a refrigerator at a constant velocity.
[tex] F_{x} = F_{f} = -230 N [/tex]
[tex]F_{f}[/tex]: is the friction force.
Then, the work is:
[tex] W = F*d = -230 N*8.1 m = -1863 J [/tex]
Therefore, the magnitude of the work performed by the mover is 1863 J.
I hope it helps you!
PLS HELP BEING TIMED!!!
Which equation represents the law of conservation of energy in a closed system?
KEi + PEi = KEf + PEf
PEi + PEf = KEi + KEf
KEi – KEf = PEi – PEf
KEi – PEf = PEi – KEf
Answer:
[tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex]
Explanation:
A closed system is a system where exists energy interactions with surroundings, but not mass interactions. If we neglect any energy interactions from boundary work, heat, electricity, magnetism and nuclear phenomena and assume that process occurs at steady state and all effects from non-conservative forces can be neglected, then the equation of energy conservation is reduce to this form:
[tex]\Delta K +\Delta U_{g} = 0[/tex] (1)
Where:
[tex]\Delta K[/tex] - Change in kinetic energy of the system, measured in joules.
[tex]\Delta U_{g}[/tex] - Change in gravitational potential energy of the system, measured in joules.
If we know that [tex]\Delta K=K_{i}-K_{f}[/tex] and [tex]\Delta U_{g} = U_{g,i}-U_{g,f}[/tex], then we get the following equation:
[tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex] (2)
Where [tex]i[/tex] and [tex]f[/tex] stands for initial and final states of each energy component.
Hence, the right answer is [tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex]
Answer:
KEi + PEi = KEf + PEf
Explanation
right on edge 2020
Diana hangs a lead cylinder with a force of 12 N from a model bridge.
Which vector(s) accurately illustrates the reaction force of the bridge on the lead cylinder?
The action and reaction law allows us to find that the reaction force, the weight of the cylinder, is:
12 N force directed upward
Newton's third law or action and reaction law, establishes that if two bodies interact with each other the force that one applies to the other, is equal in magnitude to the force of the second on the first but in the opposite direction, that is, all forces act in pairs one in each body that interact.
Forces with these characteristics are called action and reaction.
In this case we have a hanging cylinder, with the cylinder it has mass so the weight is 12 N it acts on the table in a downward direction, let's say this is the action force.
In response to this force, the table exerts a force on the cylinder of equal magnitude but in the opposite direction, which is why it is directed upwards.
let's analyze the force diagram
When analyzing the forces shown in the diagram, the forces of equal magnitude to the weight are the first twoThe weight is directed downward, the answer must be directed upward.
In conclusion using theaction and reaction law we find that the answer for reaction force is:
12 N force directed upward
Learn more about the action and reaction law here:
https://brainly.com/question/22746565
1. A large ocean liner floating in the sea has a volume of
375 000 m² and displaces 50 000 m² of sea water. Determine the
density and mass of the ship. Explain why, despite being made
of metal, the ship is able to float.
Answer:
Density of the ship :133.33 kg/m³
Mass of the ship :50,000,000 kg
Ships are able to float on water because they displace a volume that equals their own weight
Explanation:
The formula for density is ;
Density = Mass/Volume
But the mass of displaced fluid is give by the formula;
m=ρV where ρ is density of the fluid and V is volume of water displaced
Volume of liner= 375000 m³
Volume displaced = 50000 m³
The volume of the water displaced is equal to mass of the liner
I m³ = 1000 kg
50000 m³ = 50000*1000 =50,000,000 kg
50,000,000 kg ----------mass of the ship
So if ;
m= 50,000,000 kg
v= 375000 m³
ρ = m/V
ρ = 50,000,000/375000
ρ = 50,000,000/375000
ρ =133.33 kg/m³
Ships are able to float on water because they displace a volume that equals their own weight. Additionally, the air contained in the spaces of the ship inside is much less dense than density of water aiding in the floating process.
Assuming that the acceleration of an object due to gravity is ag = 10 m/s2, it is possible to find the distance an object falls when dropped by using the equation ay = \frac{1}{2} ag t2. Using this value for gravity, how far would an object drop after 5.0 s?
105 m
125 m
135 m
115 m
Answer:
125 m
Explanation:
i just did the edpuzzle
In how many ways can chemical reaction takes place? what are they?
Answer:
Chemists classify chemical reactions in a number of ways: by type of product, by types of reactants, by reaction outcome, and by reaction mechanism. Often a given reaction can be placed in two or even three categories, including gas-forming and precipitation reactions.
Explanation:
mark me as brainliest thank you
plzzzz help me this is due today. only need help with these two questions and the element is oxygen.
How do protons, neutrons, and electrons differ in terms of their electrical charges and locations within the atom?
Describe the four fundamental forces. Which of these forces are involved in chemical bonding?
Answer: thanks for the point
Explanation:
If you are trying to hit a baseball as far as possible, you would want to:
apply a small force over a short time
apply a small force over a long time
apply a large force over a short time
apply a large force over a long time
Jake and Amir are both standing on identical skateboards and
perform a physics experiment in which they push off one
another to move. Jake is taller and more massive than Amir. If
Jake pushes with 20 N of force, what force would he feel
backwards away from Amir? F= N
Answer: 20
Explanation:
If Jake pushes with 20 N of force, the force that he would feel backwards away from Amir is 20N
Force simply means the strength or energy that can later the position of an object. Force can also be described as a push or pull.
It should be noted that since Jake pushes with 20 N of force, the force that he would feel backwards away from Amir will be the exact force that was used in pushing.
This will therefore be 20 Newton as well.
Read related link on:
https://brainly.com/question/18038995
The most important characteristic in designing the soundproof room is to create walls that
Answer:
make sound bounce off walls
Answer:
Explanation:
Walls that absorb the sound and dont just bounce or reflect the sound straight back. Like how video makers have foam walls with ridges on their walls.
Kylie has a mass of 54 kg and is jogging at a velocity of 3 m/s what is Kylie’s kinetic energy?
A steel beam is rotated in a horizontal plane to provide the centripetal acceleration for training pilots. If the pilot sits 2.19 m from the center of rotation, at what speed must he rotate in order to experience a horizontal centripetal acceleration of 65.8 m/s/s?
Given :
Pilot sits 2.19 m from the center of rotation.
Horizontal centripetal acceleration is 65.8 m/s².
To Find :
The angular velocity of the pilot .
Solution :
We know, centripetal acceleration is given by :
[tex]a = \omega^2 r\\\\\omega = \sqrt{\dfrac{a }{r}}\\\\\omega = \sqrt{\dfrac{65.8 }{2.19}}\\\\\omega = 5.48\ s^{-1}[/tex]
Hence, this is the required solution.
Could somebody please explain the Coriolis effect? Thank you! (also the subject is physical science but that wasn't an option so I just put physics)
Answer:
The Coriolis Effect makes things appear to move in a curve around our planet, like, for example, a plane. This is also due to the fact that our Earth is round, so nothing really moves in a straight line. It is "an effect whereby a mass moving in a rotating system experiences a force (the Coriolis force ) acting perpendicular to the direction of motion and to the axis of rotation."
Explanation:
Jenny puts a book on her desk. Jenny’s book has an area of 200 cm2.It exerts a pressure of 0.05 N/cm2 on the desk. What is the weight of the book? *
The radius of the planet Mercury is 2.43 x 10^6m and its mass
is 3.2 x 10^23 kg. What is the speed of a satellite in orbit
265.000 m above the surface?
[tex]\huge\boxed{Option D}[/tex]
_____________________________________DATA:Radius of Mercury = [tex]R_m[/tex] = [tex]2.43x10^6m[/tex]
Mass of Mercury = [tex]M_m = 3.2x10^{23}m[/tex]
Distance Satellite above the surface of the Mercury = d = 265,000m
Gravitational Constant = [tex]G = 6.67x10^{-11} \frac{N.m^2}{kg^2}[/tex]
_____________________________________SOLUTION:Since the Satellite is orbiting around the Planet Mercury, due to the centripetal force, and Centripetal force is the force that acts towards the center of the circle, Whereas The gravitational force also acts towards the center of the circle thus we can say that Centripetal force is equal or same as centripetal force. So,
[tex]F_g =F_C[/tex]
Fg is Given by,
[tex]F_g = \frac{GM_MM_S}{r^2}[/tex]
Fc is Given by,
[tex]F_c=\frac{M_SV^2}{r}[/tex]
Where,
G is Gravitational Constant
[tex]M_e[/tex] is mass of Planet Mercury
[tex]M_S[/tex] is Mass of Satellite
r(small letter) is the distance between the center of the Planet Mercury and the satellite.
V is velocity of satellite
_____________________________________Now,
[tex]\frac{GM_MM_S}{r^2} =\frac{M_SV^2}{r}[/tex]
[tex]V = \sqrt\frac{GM_M}{r}[/tex]
r can also be written as,
[tex]V = \sqrt\frac{GM_M}{R_M +d}[/tex]
Substitute the variables,
[tex]V = \sqrt{\frac{(6.67x10^{-11})x(3.2x10^{23})}{2695000}[/tex]
Simplify the equation,
V = 2814 [tex]\frac{m}{s}[/tex]
Approximately,
V = 2800 [tex]\frac{m}{s}[/tex]
_____________________________________Best Regards,'Borz'An object that is experiencing two vertical forces (upwards and a downwards) is moving downward with a constant speed. What can be concluded about the strength of the two forces?
Answer:
Both upward and downward forces are equal
Explanation:
When an object is acted upon by two vertical forces ; upward and downward, and the object moved at a constant speed, then the net force acting upon the object is zero(upward force + downward force = 0). This is because an object will only move at a constant velocity if the opposing forces cancels each other out. Since the falling object is already in motion, and maintaining a constant velocity, there is no for required to keep the body in motion and as such the Velocity at which the body is moving remains constant.
A car of mass 1500 kg starting from rest can reach a speed of 20
m/s within 10 seconds. Calculate the accelerating force of the car
engine.
Explanation:
F=MA
F=1500 * 2
F=3000N
we now the Earth is round .but .the earth is moving .but also some time we go to the under when the earth is moving .but why we cant fall?
Answer:
lol bruhh wat a question
We donot feel any of this motion because these speed are constant. The spining and orbital speed of earth stay the same so we don't feel any acceleration or deceleration. You can only feel motin if your speed change.
Hope it's Help!
Which element most likely interacts with water the same way lithium interacts with water?
Answer:
Is there a multiple choice or select all that apply? I would say Potassium (K) or Sodium (Na)
Explanation:
How do invasive species impact long term biodiversity in an economy?
Answer:
Invasive species alter and degrade the environment, and have a negative effect on both native species and the people who live and work there. The impacts of invasive species include: Reduced biodiversity. Decreased availability and quality of key natural resources.
Explanation:
Hope this helps!
What is a material that can dissolve in another material called?
Slippery
Physical
Soluble
Insoluble
Answer:A material that can dissolve in another material called Soluble
Explanation:
Answer:
Option 3.
Soluble is the correct/best answer choice.
What is the period of a rotating object if it spins 24 times in 13 seconds?
Answer:
The period is 0.54 seconds
Explanation:
Period (T)
Is the time required for a rotating object to make one complete revolution around a circular path.
If it takes a time t to complete n revolutions, the period is:
[tex]\displaystyle T=\frac{t}{n}[/tex]
The rotating object spins n=24 times in t=13 seconds, thus its period is:
[tex]\displaystyle T=\frac{13}{24}[/tex]
T = 0.54 sec
The period is 0.54 seconds
Help please! I hope the given possibles help
Answer:
The answer is "[tex]5.184 \times 10^{23}[/tex] kg"
Explanation:
Given:
[tex]g= 6.003 \ \frac{m}{s^2}\\\\G= 6.67 \times 10^{-11} \ \frac{N - m^2}{kg^2}\\\\M=?\\\\radius= 2,400 \ km\\\\[/tex]
Calculating diameter:
[tex]Diameter =radius \times 2[/tex]
[tex]=24\times 10^5 \times 2\\\\=48 \times 10^5 \ m[/tex]
The formula for mass calculation:
[tex]\to g = G \times \frac{M}{(\frac{d^2}{4})}\\\\\to g=G\times \frac{4M}{d^2}\\\\\to 4M= \frac{g \times d^2}{G} \\\\\to M= \frac{g \times d^2}{4G} \\\\[/tex]
[tex]=\frac{6.003 \times (48 \times 10^{5})^2}{4 \times 6.67 \times 10^{-11}}\\\\=\frac{6.003 \times 2,304 \times 10^{10}}{26.68\times 10^{-11}}\\\\=\frac{13,830.912 \times 10^{10}}{26.68\times 10^{-11}}\\\\=518.4 \times 10^{21}\\\\= 5.184 \times 10^{23}\\\\[/tex]
What two processes are part of electromagnetism? A. The production of a magnetic field by an electric current B. The production of a magnetic field by permanent magnets C. The attraction of electric charges for each other D. The production of an electric current by a moving magnet
Two processes, the magnetic field production by electric current and electric current production by moving magnets are part of Electromagnetism.
Electromagnetism:
It is a branch of physics in which scientists study the electromagnetic force. Or in simple words studies the interaction of electric and magnetic field.
This includes the production of magnetic field from the electric current and electric current from moving magnet.
The study of magnetic field of a permanent magnet is part of magnetism while the attraction of electric charges by each other is studied under electrostatics.
Therefore, two processes, the magnetic field production by electric current and electric current production by moving magnets are part of Electromagnetism.
To know more about Electromagnetism:
https://brainly.com/question/13803241
3 Kyra and Pari are timing how long it takes for 1 g of sugar to dissolve in hot water.
Kyra records a time of 24.3 seconds. Pari records a time of 24 seconds. Whose reading
is more precise? Why?
Answer:
Kyra is more precise.
Explanation:
Kyra is more precise as she has included the exact point second it had dissolved whereas Pari just rounded it to the closest number making her write a whole number that was rounded down.
A computational model predicts the maximum kinetic energy a roller coaster car can have given its mass, the speed at the highest point of its journey, and the height of the highest point. The mass is 250 kg, and the highest point of the journey is at 30m, where the cart is at rest. What is the maximum kinetic energy?
A. 113500 J
B. 468750 J
C. 0 J
D. 73500 J
Answer:
D
Explanation:
The decrease in potential energy is equal to the increase in kinetic energy.
mgh
250 x 9.8 x 30
=73, 500
Answer:
73,500 J
Explanation:
100% Correct
A transverse and longitudinal wave combine to form what kind of wave?
a sound wave
a radio wave
an electromagentic wave
a surface wave
How does a salt differ from an acid or base?
Answer:
An acid is defined as a substance whose water solution tastes sour, turns blue litmus red and neutralizes bases. A substance is called base if its aqueous solution tastes bitter, turns red litmus blue or neutralizes acids. Salt is a neutral substance whose aqueous solution does not affect litmus
A box is sitting stationary on a long level ramp on level ground. The coefficient of static friction is (1.0). One end of the ramp is slowly lifted higher and higher. What is the angle of the ramp with respect to the ground when the box begins slidig?
Answer:
45 degrees
Explanation:
Given that the coefficient of friction, [tex]\mu=1.0[/tex]
Let the angle of the ramp be [tex]\theta[/tex].
The gravitational force acting downward [tex]=mg[/tex]
The normal reaction by the ramp on the box, [tex]N=mg\cos\theta[/tex]
So, the maximum frictional force that can act on the box, [tex]f= \mu N[/tex]
The force along with the plane in the direction of sliding, [tex]F = mg\sin\theta[/tex]
When the box begins sliding, the F must have to overcome the frictional force,f.
So, F=f
[tex]mg\sin\theta=\mu N \\\\mg\sin\theta=\mu mg\cos\theta \\\\\frac {\sin\theta}{\cos\theta}=\mu \\\\\tan\theta=\mu \\\\\theta=\tan^{-1}\mu \\\\[/tex]
Putting the value of \mu, we have
[tex]\theta=\tan^{-1}1[/tex]
[tex]\theta=45[/tex] degrees.
Hence, the angle of the ramp with respect to the ground when the box begins sliding is 45 degrees.
A 8.0\,\text {kg}8.0kg8, point, 0, start text, k, g, end text box is released from rest at a height y_0 =0.25\,\text my 0 =0.25my, start subscript, 0, end subscript, equals, 0, point, 25, start text, m, end text on a frictionless ramp. The box slides from the ramp onto a rough horizontal surface. The box slides 2.0\,\text m2.0m2, point, 0, start text, m, end text horizontally until it stops.
Answer:
μ = 0.125
Explanation:
To solve this problem, which is generally asked for the coefficient of friction, we will use the conservation of energy.
Let's start working on the ramp
starting point. Highest point of the ramp
Em₀ = U = m h y
final point. Lower part of the ramp, before entering the rough surface
[tex]Em_{f}[/tex] = K = ½ m v²
as they indicate that there is no friction on the ramp
Em₀ = Em_{f}
m g y = ½ m v²
v = [tex]\sqrt{2gy}[/tex]
we calculate
v = √(2 9.8 0.25)
v = 2.21 m / s
in the rough part we use the relationship between work and kinetic energy
W = ΔK = K_{f} -K₀
as it stops the final kinetic energy is zero
W = -K₀
The work is done by the friction force, which opposes the movement
W = - fr x
friction force has the expression
fr = μ N
let's write Newton's second law for the vertical axis
N-W = 0
N = W = m g
we substitute
-μ m g x = - ½ m v²
μ = [tex]\frac{v^{2} }{2 g x}[/tex]
Let's calculate
μ = [tex]\frac{2.21^{2}}{2\ 9.8\ 2.0}[/tex]
μ = 0.125
A 8.0 kg box is released from rest at a height y0 = 0.25 m on a frictionless ramp. The box slides from the ramp onto a rough horizontal surface. The box slides 2.0 m horizontally until it stops.
What is the friction coefficient of the horizontal surface?
Answer: 0.125
Question 4 of 10
Which option is a good blackbody radiator?
O A. A lightbulb
O B. A balloon
O C. A person
O D. A mirror
SUBM
Answer:
A lightbulb
Explanation:
Answer:
Lightbulb
Explanation: got it right