A man is in a helicopter ascending vertically at constant rate of 24.5m/s accidentally drops a toy out the window when the helicopter is 120.0m above the ground. (g = 9.8m / s)

a. How long will it take the toy to reach the ground

b. What will its speed be when it hits the ground?​

Answer: The answer is 7.75v

Explanation; As we know,

                                    power dissipated= (voltage)^2/resistance

                                             0.4w = v^2/150  

                                                 v^2=0.4w*150ohm

                                                   v^2=60

                                                     v=7.75v

Wire 1 in cross section; the wire is long and straight, carries a current of 4.20 mA out of the page, and is at distance d₁ = 2.58 cm from a surface. Wire 2. which is parallel to wire 1 and also long, is at horizontal distance d-5.05 cm from wire 1 and carries a current of 6.88 mA.

To find the x component of the magnetic force per unit length on wire 2 due to wire 1, we can use the formula for the magnetic force between two parallel current-carrying wires we get

F = μ₀I₁I₂/(2πd)

Where F is the magnetic force per unit length, μ₀ is the magnetic constant (4π x [tex]10^{-7}[/tex]Tm/A), I₁ and I₂ are the currents in the wires, and d is the distance between the wires.

In this problem, we need to find the x component of the magnetic force per unit length on wire 2 due to wire 1. We can break down the problem into components by considering the direction of the magnetic field due to wire 1 at the position of wire 2. The magnetic field due to wire 1 will be perpendicular to both wire 1 and wire 2, and will be directed into the page.

To find the x component of the magnetic force, we need to consider the component of the magnetic force that is perpendicular to wire 2. This component will be directed along the x axis, and will have a magnitude of

[tex]F_{x}[/tex] = Fsinθ

Where θ is the angle between the direction of the magnetic force and the x axis. Since the magnetic force is directed into the page, θ is 90 degrees, and sinθ = 1.

Substituting the values given in the problem, we get

F = (4π x [tex]10^{-7}[/tex]Tm/A)(4.20 x[tex]10^{-3}[/tex] A)(6.88 x [tex]10^{-3}[/tex]A)/(2π*0.0258 m)

F = 3.99 x [tex]10^{-10}[/tex] N/m

Therefore, the x component of the magnetic force per unit length on wire 2 due to wire 1 is

[tex]F_{x}[/tex] = Fsinθ= (3.99 x [tex]10^{-10}[/tex] N/m)(1) = 3.99 x [tex]10^{-10}[/tex] N/m

Hence, the x component of the magnetic force per unit length on wire 2 due to wire 1 is 3.99 x [tex]10^{-10}[/tex] N/m.

To know more about cross section here

https://brainly.com/question/31476632

#SPJ1

(A)The water will shoot out of the hole at a speed of 4.77 m/s, and the pressure of the water at the hole will be 9.91 × 10^4 Pa, and (B) The water will shoot out of the larger hole at a speed of 0.529 m/s, and the pressure of the water at the hole will be 1.012 × 10^5 Pa.

We can use Bernoulli's equation to solve this problem, which relates the pressure, velocity, and height of a fluid. The equation states that:

P + (1/2)ρv^2 + ρgh = constant

where P is the pressure, ρ is the density of the fluid, v is the velocity of the fluid, g is the acceleration due to gravity, and h is the height of the fluid.

(A) The diameter of the hole is 4.51 cm, which corresponds to a radius of 2.255 cm = 0.02255 m. The area of the hole is A = πr^2 = 1.587 × 10^-4 m^2. The volume flow rate of water is Q = 0.757 m^3/s.

We can calculate the velocity of the water as it exits the hole using the equation:

Q = Av

where A is the area of the hole and v is the velocity of the water. Solving for v, we get:

v = Q/A = 4.77 m/s

Now, we can use Bernoulli's equation to find the pressure of the water at the hole. Assuming that the height of the fountain is negligible compared to the height of the atmosphere, we can set the height term to zero. Also, we can assume that the pressure at the surface of the fountain is atmospheric pressure, which we can take as P = 1.013 × 10^5 Pa. Then, the equation becomes:

P + (1/2)ρv^2 = constant

Solving for P, we get:

P = constant - (1/2)ρv^2

At the hole, the velocity of the water is v = 4.77 m/s, and the density of water is ρ = 1000 kg/m^3. Substituting these values, we get:

P = 1.013 × 10^5 Pa - (1/2) × 1000 kg/m^3 × (4.77 m/s)^2 = 9.91 × 10^4 Pa

So, the water will shoot out of the hole at a speed of 4.77 m/s, and the pressure of the water at the hole will be 9.91 × 10^4 Pa.

(B) If the diameter of the hole is three times as large, then the area of the hole will be nine times as large. Therefore, the volume flow rate of water will be distributed over a larger area, resulting in a lower velocity. The new area of the hole is A = 9 × 1.587 × 10^-4 m^2 = 1.43 × 10^-3 m^2. The volume flow rate of water is still Q = 0.757 m^3/s.

Using the equation Q = Av, we can find the new velocity of the water:

v = Q/A = 0.529 m/s

Using Bernoulli's equation, we can find the pressure of the water at the larger hole:

P = 1.013 × 10^5 Pa - (1/2) × 1000 kg/m^3 × (0.529 m/s)^2 = 1.012 × 10^5 Pa

So, the water will shoot out of the larger hole at a speed of 0.529 m/s, and the pressure of the water at the hole will be 1.012 × 10^5 Pa.

Hence, Water will flow out of the smaller hole at a speed of 0.529 m/s and a pressure of 1.012 × 10^5 Pa, and the water will shoot out of the hole at a speed of 4.77 m/s and a pressure of 9.91 × 10^4 Pa.

To learn more about  the assumptions of Bernoulli's equation click:

https://brainly.com/question/31047017

#SPJ1

Answer:
The force between the two balloons can be calculated using Coulomb's law:

F = k * (q1 * q2) / r^2

Substituting the given values, we get:

F = 9 × 10^9 * (5 × 10^-9 * (-4 × 10^-9)) / (0.025)^2

F ≈ -1.44 × 10^-4 N

The force between the two balloons is approximately -1.44 × 10^-4 N. The negative sign indicates that the force is attractive.

The value of the heat changes is as follows:

The heat quantity of the cup, Qcup is calculated using the formula below:

Q = mcΔT

where;

The heat absorbed by the glass cup, Qcup will be:

Qcup = 104 * 0.385 * (15.4- 22.0)

Qcup = -271 J

The heat absorbed by the water, Qwater will be:

Qwater = 330 * 4.184 * *(15.4 - 22.5)

Qwater = -12284 J

The mass of the ice, Mice, that melted will be:

Heat absorbed by ice = Heat released by water + heat released by cup

-MiceΔHf = Qwater + Qcup

where

Mice = -(Qwater + Qcup) / ΔHf

Mice = -(-1228 - 271) / 333.55

Mice = 38.95 g

Finally, the heat absorbed by the ice will be:

Qice = mcΔT

Qice = (38.95 g) (2.108 J/g°C) (15.4°C - (-8.7°C))

Qice = 3951 J

Learn more about heat capacity at: https://brainly.com/question/28825214

#SPJ1

a) A = 8.0 m South

Since the vector is directly along the South direction, there is no x component.

x component: 0 m

y component: -8.0 m (negative because it's southward)

Component form: A = (0, -8.0)

b) B = -15.0 m at 30° East of North

To find the components, we can use the following relationships:

x component: B_x = B * sin(θ)

y component: B_y = B * cos(θ)

B_x = -15.0 * sin(30°) = -15.0 * 0.5 = -7.5 m

B_y = -15.0 * cos(30°) = -15.0 * (sqrt(3)/2) ≈ -12.99 m

Component form: B ≈ (-7.5, -12.99)

c) C = 12.0 m at 25° South of West

x component: C_x = -C * cos(θ) (negative because it's westward)

y component: C_y = -C * sin(θ) (negative because it's southward)

C_x = -12.0 * cos(25°) ≈ -10.85 m

C_y = -12.0 * sin(25°) ≈ -5.16 m

Component form: C ≈ (-10.85, -5.16)

d) D = 10.0 m at 53° West of North

x component: D_x = -D * sin(θ) (negative because it's westward)

y component: D_y = D * cos(θ)

D_x = -10.0 * sin(53°) ≈ -8.0 m

D_y = 10.0 * cos(53°) ≈ 6.0 m

Component form: D ≈ (-8.0, 6.0)

The magnitude of a uniform electric field between two plates of capacitor is about 1.7 ✕ 106 N/C. If the distance between these plates is 3.7 cm then the potential difference between the plates is 62.5 kV.

A capacitor is a device that stores electrical energy in an electric field by collecting electric charges on two isolated surfaces. It is a two-terminal passive electrical component.

Electric field of the parallel plate capacitor is given as,

E = V/d

Given,

E =  1.7 ✕ 10⁶ N/C.

d = 3.7 cm,

V= Ed

V = 1.7 ✕ 10⁶ N/C × 3.7 × 10⁻² m

V = 62.5 kV.

To know more about Capacitor :

https://brainly.com/question/17176550

SPJ1.

Answer: check the pic

Explanation:

The distance an object moves if 25J of work is done with 3.0N of force is 8.33 m.

For a given amount of force, F, and a given distance, d, the formula for calculating work done is as follows:

Work done = Force x distance

So, the distance would be,

Work done / force = 25/3 = 8.33 m.

Work is the energy exerted by an object when it applies a force to move another object over some distance.

To learn more about work done,

https://brainly.com/question/31428590

The orange orb has a surface area, temperature, and a net rate of heat transmission per unit surface area of:

To solve this problem, using the equation that combines rates of heat transfer via radiation, emissivity, and surface area of object:

P_net = εσA(T_orb⁴ - T_sur⁴)

where P_net = net rate of heat transfer via radiation,

ε = emissivity of the object (which is given as 0.418),

σ = Stefan-Boltzmann constant, 5.67 x 10⁻⁸ W/m²K⁴,

A = surface area of the object,

T_orb = temperature of the object, and

T_sur = temperature of the surroundings.

First, find the net rate of heat transfer via radiation:

P_net = 384 W - 362 W = 22 W

Plug in the given values and solve for the surface area:

22 W = 0.418 x 5.67 x 10⁻⁸ W/m²K⁴ x A x (T_orb⁴ - 273⁴)

Solving for A:

A = 4πr² = 4π (d/2)² = 4π (0.1 m)² = 0.1257 m²

where assuming the orange orb is a sphere with a diameter of 0.1 m.

Solve for the temperature of the orange orb:

22 W = 0.418 x 5.67 x 10⁻⁸ W/m²K⁴ x 0.1257 m² x (T_orb⁴ - 273⁴)

T_orb⁴ - 273⁴ = 22 W / (0.418 x 5.67 x 10⁻⁸ W/m²K⁴ x 0.1257 m²) = 97417 K⁴

Taking the fourth root of both sides:

T_orb = (97417 K⁴ + 273⁴)^(1/4) = 363.7 K

Calculate the net rate of heat transfer per unit surface area:

P_net/A = 22 W / 0.1257 m² = 175.1 W/m²

Therefore, the surface area of the orange orb is 0.1257 m², its temperature is 363.7 K (90.5°C), and the net rate of heat transfer per unit surface area is 175.1 W/m².

Find out more on emissivity here: https://brainly.com/question/30580585

#SPJ1

The coefficient of friction between the two surfaces is  tan α.

option B.

The coefficient of friction between two surfaces that are in contact is the ratio of the  force of friction to normal reaction.

Mathematically, the formula for coefficient of friction is given as;

μ = Ff/Fn

where;

For the given diagram,

Ff = mg sinα

Fn = mg cosα

The coefficient of friction;

μ = mg sinα/mg cosα

μ = sinα/cosα = tan α

Learn more about coefficient of friction here: https://brainly.com/question/20241845

#SPJ1

The example of energy transformation that could never occur, as explained by the second law of thermodynamics, is the 400 J of heat added to the operating gas of a heat engine is transformed into 400 J of work. Option A is correct.

The second law of thermodynamics states that in any energy transformation, the total entropy (measure of disorder) of a closed system will always increase or remain constant. It means that some energy will always be wasted as heat and cannot be completely converted into useful work. The second law of thermodynamics is a fundamental law of nature that governs energy transformations.

It states that in any energy transformation process, the total entropy (measure of disorder) of a closed system will always increase or remain constant. Entropy can be thought of as a measure of the amount of energy that is unavailable to do useful work. It is impossible to transform all 400 J of heat into work without generating any waste heat. This is because the heat engine must expel some heat to the cold reservoir to comply with the second law. Option A is correct.

To know more about the Energy transformation, here

https://brainly.com/question/13592831

#SPJ1

a. The energy will be 7350 Joules.

b. Due Due to the object remaining at rest, its kinetic energy is zero.

c. The value obtained is v is 17.1 m/s.

d. When the object was initially at rest at 30 m, all of its energy was putative energy which totalled 7350 J.

PE = mgh = (25 kg)(9.8 m/s^2)(30 m) = 7350 J

Additionally, PE at 5 m is PE = mgh = (25 kg)(9.8 m/s^2)(5 m) = 1225 J. As enforced by the rule of conservation of energy, PE = KE at any point during the fall. Bearing this in mind, at 5 m KE equals 1225 J.

When the object was initially at rest at 30 m, all of its energy was putative energy which totalled 7350 J.

Learn more about energy on

https://brainly.com/question/13881533

#SPJ1

All substance listed in the chart is made up of the atoms.

Atom is smallest entity of a substance. Body is made up of atoms. it is basic building block of a body. An atom consist of electrons, protons and neutrons as sub atomic particle. whole mass of the atom is concentrated at the center of the atom which we call it as nucleus, nucleus consist of proton and neutron. Electron revolve around the nucleus at determined(fixed) orbit. Total number of protons in the atom decides the atomic number and the elements in the periodic table. The electrons which are completely filled orbitals are called as core shell electrons and which are not filled completely are called as valence electron. valence electrons are responsible for physical and chemical properties of the element. Elements which are on same column in periodic table have same number of valence electrons . Hence they have same properties.

To know more about Atom :

https://brainly.com/question/30898688

#SPJ1.

The coefficient of kinetic friction between the block and the horizontal surface is approximately 0.32, The correct choice is a.

We can use conservation of energy to solve this problem. Initially, the block has kinetic energy, which is gradually dissipated by friction until it comes to rest at the maximum displacement from equilibrium.

The initial kinetic energy of the block is:

K = (1/2) * mv²

where m is the mass of the block and v is its speed. Plugging in the given values, we get:

K = (1/2) * (2.0 kg) * (2.6 m/s)² = 6.76 J

At the maximum displacement from equilibrium, all of this energy has been dissipated by friction and converted into potential energy stored in the spring:

U = (1/2) * k * x²

where k is the spring constant and x is the maximum displacement from equilibrium. Plugging in the given values, we get:

U = (1/2) * (250 N/m) * (0.20 m)² = 5 J

Since energy is conserved, we can set K equal to U:

K = U

(1/2) * mv² = (1/2) * k * x²

Solving for the coefficient of kinetic friction, we get:

μk = (kx² - mv²) / (mgx)

where g is the acceleration due to gravity. Plugging in the given values, we get:

μk = [(250 N/m) * (0.20 m)² - (2.0 kg) * (2.6 m/s)²] / [(2.0 kg) * (9.81 m/s²) * (0.20 m)]

μk ≈ 0.32

Option a is correct.

To know more about spring, here

brainly.com/question/14670501

#SPJ1

The equivalence resistance rounded off to two significant digits is

The equation used to work out the equivalent resistance of two resistors in parallel is as follows:

1/Req = 1/R1 + 1/R2

When R1 and R2 are set at 43 Ohms, we can fill in the placed values like so:

1/Req = 1/43 + 1/43

Simplifying to reduce the equation

1/Req = 2/43

cross multiplying the sides of the equation:

2 x Req = 43

Isolating Req

Req = 43/2

Req = 21.5 Ohms

Req = 22 Ohms to 2 significant figures

Learn more about resistors at

https://brainly.com/question/24858512

#SPJ1

The pollution from the first plant would be half that of the second plant for the same amount of energy produced.

The energy efficiency of a coal plant refers to the amount of energy produced per unit of fuel consumed. If the first plant is twice as energy efficient as the second plant, it means that it can produce the same amount of energy using half the amount of fuel.

Since pollution from coal plants is directly proportional to the amount of fuel consumed, the first plant would produce half the pollution of the second plant for the same amount of energy produced. This assumes that the two plants have the same level of emissions per unit of fuel consumed, which may not necessarily be the case.

To know more about pollution, here

brainly.com/question/28519286

#SPJ1

The magnitude of the magnetic field at P₂ is 6.06 x 10⁻⁵ T.

Using the Biot-Savart Law, we can determine the magnetic field at point P2 due to the current-carrying wire. The magnitude of the magnetic field B at P2 is given by:

B = μ₀i/4π (sinθ₁ - sinθ₂)

where μ₀ is the magnetic constant, i is the current, θ₁ is the angle between the wire and the line joining the wire and point P₂, and θ₂ is the angle between the wire and the line perpendicular to the wire and passing through point P₂.

From the given diagram, we can see that sinθ₁ = L/2R and sinθ₂ = (R - L/2)/R. Substituting these values and the given values of i, L, and R into the equation, we get:

B = (4π x 10⁻⁷ Tm/A) x 0.780 A / 4π (L/2R - (R - L/2)/R)

= 6.06 x 10⁻⁵ T

As a result, the magnetic field magnitude at P₂ is 6.06 x 10⁻⁵ T.

To know more about the Magnetic field, here

https://brainly.com/question/13148187

#SPJ1

The following would expect to be a strong electrolyte in solution (b) KCI is correct option.

When dissolved in water, a strong electrolyte produces a large concentration of ions in solution by totally dissociating into ions.  The following compounds are typically strong electrolytes in solution according to this definition:

These substances readily dissociate into ions in water and exhibit high electrical conductivity, making them strong electrolytes in solution.

Therefore, the correct option is (b).

The complete question is,

Which of the following would be a strong electrolyte in solution?

a) Al(OH)₃ b) KCI c) Pbl₂

To know more about electrolyte

https://brainly.com/question/30861174

#SPJ1

A capacitor with two lines of charge on its parallel plates. The bottom plate has an equal line of negative charges that are the opposite in charge to the positive charges on the top plate, while the top plate has a line of positive charges.

As a result, an electric field (E-field) is produced between the plates that can be measured with a sensor.

In a parallel-plate capacitor, the E-field between the plates is uniform and pointed perpendicularly to the plates. It is represented by the equation E = σ/ε, where ε is the permittivity of the medium between the plates and σ is the charge density (charge per unit area) on the plates.

In this instance, the charge density on the top and bottom plates is the same but with opposing signs since the lines of charges on the plates are equal in size and opposite in charge. Assume that the top plate has positive charges and the bottom plate has negative charges, and that the charge density on both plates equals.

A sensor placed between the capacitor's plates will now allow us to measure the E-field, which will reveal that it is constant and perpendicular to the plates. E = σ/ε, where σ, is the charge density and is the permittivity of the medium between the plates, will be the magnitude of the E-field.

To know more about charges

https://brainly.com/question/28941594

#SPJ4

When describing motion, speed indicates the pace at which an object is travelling. It has one scalar component identifying its magnitude, irrespective of direction.

The unit for measuring speed can be either meters per second (m/s) or miles per hour (mph). For velocity, it's a different story. Its definition encompasses both speed and direction since it's a vector quantity. Measureable just like speed using m/s or mph.

In plain physic terms, acceleration reveals how much speed changes over time; hence it is also a vector quantity with not only size but also direction. Depending on whether a physical item is increasing in momentum, slowing down or static, the value could be positive, negative, or zero. Acceleration is calculated using units metres per second squared (m/s2).

Learn more about speed on

https://brainly.com/question/13943409

#SPJ1

(a) Ax=2.00 m and Ay--1.00 m, the angle of the vector is  153.4⁰.

(b) Ax=2.00 m and Ay= 1.00 m, the angle of the vector is 26.6⁰.

(c) Ax= -2.00 m and Ay 1.00 m, the angle of the vector is 333.43⁰.

(d) Ax= -2.00 m and Ay = -1.00 m, the angle of the vector is 206.6⁰.

The angle of the vectors is known as the direction of the vectors and it is calculated as follows

(a) Ax=2.00 m and Ay--1.00 m, the angle of the vector;

tan θ = Ay/Ax

tan θ = (-1/2)

θ = arc tan (-1/2)

θ = -26.6⁰ = (180 - 26.6⁰)  = 153.4⁰ (2nd quadrant).

(b) Ax=2.00 m and Ay= 1.00 m, the angle of the vector;

tan θ = Ay/Ax

tan θ = (1/2)

θ = arc tan (1/2)

θ = 26.6⁰ (1st quadrant).

(c) Ax= -2.00 m and Ay 1.00 m, the angle of the vector;

tan θ = Ay/Ax

tan θ = (-1/2)

θ = arc tan (-1/2)

θ = -26.6⁰ = (360 - 26.6⁰) =  333.43⁰ (4th quadrant).

(d) Ax= -2.00 m and Ay = -1.00 m, the angle of the vector;

tan θ = Ay/Ax

tan θ = (1/2)

θ = arc tan (1/2)

θ = 26.6⁰ =  (180 + 26.6⁰) = 206.6⁰ (3rd quadrant).

Learn more angles of vectors here: https://brainly.com/question/26700114

#SPJ1

The work done by the woman is independent of the time taken to lift the barbell, as long as the distance lifted remains constant.

The work done by the woman lifting the barbell can be calculated using the formula:

work = force x distance

Assuming the force required to lift the barbell remains constant, the work done is directly proportional to the distance lifted.

Therefore, if the woman lifts the barbell 2.0 m in 5.0 s, the work done is:

work1 = force x distance1 = force x 2.0 m

If she lifts it the same distance in 10 s, the work done is:

work2 = force x distance2 = force x 2.0 m

Since the distance lifted is the same in both cases, the work done by the woman is the same, and can be expressed as:

work1 = work2 = force x 2.0 m

Therefore, the work done by the woman is independent of the time taken to lift the barbell, as long as the distance lifted remains constant.

To know more about the Work, here

https://brainly.com/question/30700757

#SPJ1

Answer: D. They can determine the elements that make up the surface of astronomical bodies.

Explanation: Spectroscopy and infrared technology are useful in space because they allow scientists to determine the elements that make up the surface of astronomical bodies, such as planets, moons, and asteroids.

Spectroscopy involves the analysis of light or radiation emitted or absorbed by these bodies.  When light interacts with matter, it gets absorbed or emitted in specific wavelengths that correspond to the energy levels of atoms and molecules.  By studying the pattern of these wavelengths, scientists can identify the unique "fingerprint" or spectral lines of elements and compounds.

Infrared technology, on the other hand, detects and measures the infrared radiation emitted by objects.  This radiation is produced due to the thermal energy or heat emitted by celestial bodies.  By analyzing the specific wavelengths of infrared radiation, scientists can gain insights into the composition and temperature of these bodies.

By combining spectroscopy and infrared technology, scientists can gather valuable data about the chemical composition of astronomical bodies.  This information helps in understanding the geological processes, formation, and evolution of these bodies.  It also provides insights into the presence of specific elements or compounds that may be important for studying habitability, potential resources, or even the origins of life in the universe.

Learn more about spectroscopy here: https://brainly.com/question/13329452.

Answer: It is Reflection

Explanation: Reflection occurs when incoming solar radiation bounces back from an object or surface that it strikes in the atmosphere, on land, or water, and is not transformed into heat.

The number of pool noodles that  would be needed to support the weight is 20.

The volume of a single pool noodle is calculated as follows;

V = πr²h

V = π (0.025)² x 1.65

V = 0.00324 m³

The weight of the water displaced is calculated as follows;

W = ρVg

where;

W = 1000 x 0.00324 x 9.8

W = 31.75 N

The number of pool noodles needed to support a person is calculated as follows;

= (65 x 9.8 ) / (31.75)

= 20

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

Answer: Our day-to-day life highly relates to physics.

Explanation: We know that in physics there are many laws such as gravitational laws, laws of friction, and inertia.For example