The calculated energy is 720 J.
The word "dissipation" is frequently used to refer to energy wastage. Any energy that is lost to the environment and is not converted to usable energy stores is referred to as wasted energy. Such a battery transfers charge by passing it via a potential difference of 12.0 V and providing a change in potential energy with a value equal to U=qV. We multiply the charge transported by the potential difference to determine the energy output.
U=qV.
U indicates energy here
U=12x60
U=720 J
Learn more about energy here-
https://brainly.com/question/1932868
#SPJ4
a bullet in a gun is accelerated from the firing chamber to the end of the barrel at an average rate of 6.3 cross times 10 to the power of 5 space m divided by s to the power of 2 space end exponent for 8.1 cross times 10 to the power of negative 4 end exponent space s. what is the bullet’s final velocity when it leaves the barrel, commonly known as the muzzle velocity?
The muzzle velocity of the bullet is 510.3 m/s.
What is muzzle velocity?The projectile's speed when it exits the gun's muzzle is known as muzzle velocity.
The quality (burn speed, expansion) and quantity of the propellant, the mass of the projectile, and the length of the barrel all affect the muzzle velocity of conventional firearms. While a slower burning propellant can use a heavier projectile, it requires a longer barrel to burn completely.
Apply the kinematics equation,
v=u+at
Here v is the final velocity, u is the initial velocity, a is the acceleration and t is the time interval during which a body is under acceleration.
The muzzle velocity of a bullet is the velocity with which the bullet leaves contact with the barrel of the gun.
The muzzle velocity or the final velocity of the bullet will be
v=u+at
v=0+(6.3×[tex]10^{5}[/tex])(8.1×[tex]10^{-4}[/tex])
=50.3 m/s
Therefore, the muzzle velocity of the bullet is 510.3 m/s.
To know more about muzzle velocity, visit: https://brainly.com/question/14997741
#SPJ4
you walk 3 km due east, then 2.5 km due south, then 11 km due west. how far are you from your start position?
If you walk 3 km due east, then 2.5 km due south, then 11 km due west, then you are 9.34 km far from the starting point.
Pythagoras theorem applicationIf you connect all the paths, it will make a triangle. If you join your current position with the start position, then you get the triangle ADE.
This question can be solved by using the application of Pythagoras theorem.
This theorem states that in a right-angled triangle, square of longest side is equal to the sum of the individual squares of the other two sides
Here, AD is the same as BC = 2.5km
and then EC = 11km and DC = AB = 3km
ED= EC-DC = 9 km
In the triangle ADE, according to Pythagoras theorem,
AE^2 = AD^2 + ED^2
so, AE = sqrt (9^2 + 2.5^2)
⇒ AE= sqrt (81 + 6.25)
⇒ AE = 9.34 km
Thus, you are about 9.34 km distance from your start point.
To know more about Pythagoras theorem, visit:
https://brainly.com/question/343682
#SPJ4
electricity is distributed from electrical substations to neighborhoods at 16000 v. this is a 60 hz oscillating (ac) voltage. neighborhood transformers, seen on utility poles, step this voltage down to the 120 v that is delivered to your house.
The correct answer is 1.575 A.
a)
From Transformer turns ration
N_s/N_p =V_s/V_p
=>N_p =N_s × (V_p/V_s) =100 × (1.6 × 10^4/120)
N_P=1.33 × 10^4 Turns
b)
P_out =P_in
V_sI_s =V_PI_P
210 × 120 =(1.6 × 10^4)I_p
I_p=1.575 A
What is the working principle of an electric generator?
The generator is composed of a coil with many copper wires coiled around an iron core that is rectangular in shape. The armature is the term for this coil. This armature's purpose is to boost the magnetic flux. The armature revolves between two powerful permanent magnets that have been set. Here, the magnetic lines that are created are orthogonal to the axis of the armature. Two slip rings are further attached to the armature's arms. Two metallic brushes are also linked to the slip rings, which aid in moving current from the armature to the slip rings. These rings are employed for creating moveable contact. Last but not least, the current flows via a load resistance that is wired in parallel with and across the two slip rings.
To learn more about electric generator refer the link:
https://brainly.com/question/3889034
#SPJ4
Where on the x-axis can a third positive charge be placed so that the net electric force on it is zero?
A third positive charge [tex]x = \frac{2\sqrt{2}a }{1+\sqrt{2} }[/tex] can be placed on the x-axis so that the net electric force on it is zero.
whilst -factor charges are in touch, there may be
[tex]F = k \frac{q_{1}q_{2} }{ r^{2} }[/tex]
Where
[tex]k = 9 * 10^{9} Nm^{2}C^{-1}[/tex] = the coulomb constant.
The charges' magnitudes are [tex]q_{1}[/tex] and [tex]q_{2}[/tex].
r is the separation of the charges.
Let,
The third charge equals Q at, x equals x from the source.
because there is no net force acting on the third charge.
Hence,
[tex]f_{1} + f_{2} = 0[/tex]
⇒ [tex]k\frac{(2q)Q}{x^{2} }-k\frac{qQ}{(2a-x)^{2} } = 0[/tex]
⇒ [tex]\frac{2}{x^{2} } - \frac{1}{(2a-x)^{2} } = 0[/tex]
⇒ [tex]\frac{2}{x^{2} } = \frac{1}{(2a-x)^{2} }[/tex]
⇒ [tex]\frac{\sqrt{2} }{x} = \frac{1}{2a-x}[/tex]
⇒ [tex]2\sqrt{2}a - \sqrt{2} = x[/tex]
⇒ [tex]x = \frac{2\sqrt{2}a }{1+\sqrt{2} }[/tex]
handiest when forces resulting from previous prices cancel every different out will the pressure on a third fee be 0.
at the same time as the pressure between identical costs is repulsive and is interpreted as high-quality, the pressure between two opposing expenses is attracted and is interpreted as bad.
Know more about particles of charge:
https://brainly.com/question/18750504
#SPJ4
A ball hits a wall going 10 m/s, and bounces off going 8 m/s. the coefficient of restitution is?
A ball hits a wall going 10 m/s, and bounces off going 8 m/s. the coefficient of restitution is
the coefficient of restitution is 0.8.Given that
A ball hits a wall going 10 m/s, and bounces off going 8 m/s.To find
the coefficient of restitutionSo according the question
We have
The initial velocity of approach towards the wall isu = 10 m/s.
The final velocity of separation from the wall after the collision isv = 7 m/s.
Now, We have to find the coefficient of restitution
We know that,
[tex]n = \frac{velocity \;\;of \; \;separation}{velocity \;of \;approach}[/tex]
So,
[tex]n = \frac{8}{10}[/tex]
n = 0.8
The coefficient of restitution is 0.8.
To learn more about Displacement please click on the link
https://brainly.com/question/15396364
#SPJ4
Which of the following correctly describes the axes and units of
a position-time graph?
A position-time graph shows how far an object has traveled from its starting position at any given time since it started moving.
The graph on which the immediate function x of a particle is plotted at the y-axis and the time t on the x-axis is called the position-time graph.
The distinction between them is that the velocity-time graph famous the speed of an item and whether it's miles slowing down or dashing up, whilst the position-time graph describes the motion of an item over a period of time.
Position-time graph and displacement-time graph is same. but each are different from distance-time graph. role-time graph and displacement-time graph may be bad. Distance-time graph can by no means be negative.
The shapes of the position-time graph for these basic varieties of motion - consistent pace movement and multiplied movement i.e., converting speed - monitor an vital precept. The precept is that the slope of the road on a position-time graph well-known shows beneficial statistics about the speed of the item.
Learn more about position-time graph here:- https://brainly.com/question/24190208
#SPJ9
A small cube of metal measures 16.8 mm on a side and weighs 35.9 g.what is the density of the metal in g/cm3?
Answer:
21.4 g/cm3
Explanation:
the total resistance of any number of parallel resistances, all having the same value, is equal to the value of any one of the resistors divided by the total number of resistors.
The correct answer is true.
The algebraic sum of the inverses of the individual resistances is then the inverse of the equivalent resistance of two or more resistors linked in parallel.
The total or equivalent resistance, RT, is equal to half the value of one resistor if the two parallel resistances or impedances are equal and of the same value. That is equivalent to R/2, R/3, etc., for three parallel resistors of identical value.
The total resistance, RT, will always drop when more parallel resistors are added since the equivalent resistance is always smaller than the smallest resistor in the parallel network.
To learn more about parallel resistors refer the link:
https://brainly.com/question/15404134
#SPJ4
An object has a 2 c charge. the object breaks into two pieces. one piece has a charge of -5 c. what is the exact charge (in c) of the other piece? do not include units with your answer.
An object has a 2 c charge. the object breaks into two pieces. one piece has a charge of -5 c is 7
What is charge?Charge is the traveling longitudinal wave energy. Mass and charge are the indeed related and can be simplified to a single energy equation. To relate mass and charge, Coulombs can be explained as the wave amplitude, which is measured as a distance (meters). If one assumes a substance in vacuum of space that has a physical property of kilograms, and moves as waves, then mass and charge can be described as their motion. In EWT, this substance is referred to as the ether and its components as granules.
Let's call Q the initial charge of object, which is:
Q=2c
When it breaks, two pieces will have charge and , and since the total charge must be conserved, the sum of these two charges must be equal to the initial charge of the object:
Q=Q1+Q2
We also know charge of one of the two pieces:
Q1=-5
So, by substituting Q and Q1 into the equation, we can find charge of the second piece, Q2:
Q2=Q-Q1=2-(-5)=+7
To know more about granules visit: brainly.com/question/15450859
#SPJ4
Can atomic theory be eliminated
Answer: Atoms cannot be created nor destroyed, and they are indestructible; they cannot be broken into smaller parts. This was based on the Law of Conservation
Explanation: hope this helps you a little!!
two vectors, one with a magnitude of 14 units and one with a magnitude of 5 units, are both pointing east. what is the resultant of these two vectors?
The resultant of these two vectors is 19 units of two vectors, one with a magnitude of 14 units and one with a magnitude of 5 units, are both pointing east.
Explanation
As we know R = A + B
where is R resultant A and B are vectors is possible only if the both the vectors are in the same direction.
Therefore, R = 14 + 5
19 units
What is resultant force?A resultant force is the single force and corresponding torque that are created when a system of forces and torques acting on a rigid body is added together using vectors in physics and engineering. A consequent force, also known as a resultant force-torque, is one that acts on a rigid body in the same way as the initial system of forces.
Through computational analysis or (in the case of sufficiently simple systems) a free body diagram, the resultant force on a body is calculated and visualized.
The resultant force's location of application defines the torque it produces. Some people use the term resultant force-torque to describe the forces and torques acting on a rigid body; the word resultant force should be understood to include both.
Learn more about resultant force
https://brainly.com/question/110151
#SPJ4
why did scientists using classical, newtonian physics have difficulty explaining the photoelectric effect
The correct answer is :
According to classical electrodynamics, light energy is a wave that is absorbed by atoms in a manner similar to how an object absorbs radiant heat. So, the atoms of a metal would absorb more energy the brighter the light was. It would be feasible for an electron in a metal to break free from its atoms if it received enough energy from the incoming wave. The more energy absorbed, the more energetic the metal's released electrons would be. Additionally, no electrons could conceivably be ejected until each atom had enough light energy. Light intensity was far more important than light frequency.
In many respects, the photo-electric effect contradicted this strategy:
If the light was below a specific frequency, no matter how bright it was, no electrons were released. Increased light intensity increased the number of electrons that were released, but not their energy, if the light was above this frequency.Regardless of how weak the light was, electrons were nearly immediately emitted from the metal. Even though the intensity of the light was reduced, an increase in its frequency led to more energising electrons leaving the metal.To learn more about photo-electric effect refer the link:
https://brainly.com/question/25630303
#SPJ4
a boat is stationary at 12\, \text{meters}12meters12, start text, m, e, t, e, r, s, end text away from a dock. the boat then begins to move toward the dock with an acceleration of 5.0\, \dfrac{\text{m}}{\text{s}^2}5.0 s 2 m 5, point, 0, start fraction, start text, m, end text, divided by, start text, s, end text, squared, end fraction. how long will it take the boat to reach the dock?
The time taken for the boat to reach the dock is 2.19 s
Data obtained from the questionFrom the question given above, the following data were obtained:
Initial velocity (u) = 0 m/sDistance (s) = 12 mAcceleration (a) = 5 m/s² Time (t) = ?How to determine the timeThe time taken for the boat to reach the dock can be obtained as illustrated below:
s = ut + ½at²
12 = (0 × t) + (½ × 5 × t²)
12 = 0 + 2.5t²
12 = 2.5t²
Divide both side by 2.5
t² = 12 / 2.5
Take the square root of both side
t = √(12 / 2.5)
t = 2.19 s
Thus, the time taken is 2.19 s
Learn more about acceleration:
https://brainly.com/question/491732
Learn more about velocity:
https://brainly.com/question/3411682
#SPJ1
Make the following prefix conversions.
600,000 cm = Km
0.06
60
6
0.6
Answer: 6 km
works on odyseyware
The answer would be is 6 km
A soccer ball was kicked toward the goal. The horizontal component of velocity was 22 m/s and the vertical component was 12 m/s. What is the magnitude of the resultant velocity of the soccer ball?.
The magnitude of the resultant velocity of the soccer ball is: 25.059 m/s
The formula for projectile motion that we will use to solve this exercise is:
vf= √[v(x)² + v(y)²]
Where:
vf= final velocityv(x)= horizontal component of velocityv(y)= vertical component of velocityInformation about the problem:
v(x)= 22 m/sv(y)= 12 m/svf=?Applying the final velocity formula we have:
vf= √[v(x)² + v(y)²]
vf= √[(22 m/s)² + (12 m/s)²]
vf= √[484 m²/s² + 144 m²/s²]
vf= √[628 m²/s²]
vf= 25.059 m/s
What is projectile motion?The projectile motion is the motion whose trajectory describes a parabola having a horizontal and a vertical component of motion.
Learn more about projectile motion at: brainly.com/question/10680035
#SPJ4
How much work, , must be done on a system to decrease its volume from 17.0 l to 9.0 l by exerting a constant pressure of 4.0 atm? =
By applying the specified constant pressure, the system's work done to reduce its volume from start to final is 32 l atm.
Initial volume v1 = 17.0 l
final volume v2 = 9.0 l
Pressure P= 4.0 atm
When a gas expands, there is an amount of work that is done that is equal to the product of the gas's pressure and its volume change.
We apply the formula for work done by gas against a constant external pressure.
expression: Work done = -(P. d V)
Therefore substituting the values :
Work done = - P (v2 - v1)
= - 4.0 x (-8.0) l atm
= 32 l atm.
To learn more about work done click on the link below:
https://brainly.com/question/25046865
#SPJ4
if you shout into the grand canyon, your voice travels at the speed of sound (340 m/s) to the bottom of the canyon and back, and you hear an echo. how deep is the grand canyon at a spot where you can hear your echo 5.2 seconds after you shout? [hint: think about the path the sound has to travel for you to hear your own echo.]
The Grand Canyon is 884 m deep from the spot where I heard the echo
The formula for uniformly rectilinear motion (URM) and procedure we will use to solve this exercise is:
v = x /t
Where:
x = distancet = timev = velocityInformation about the problem:
t(echo) = 5.2 sv= 340 m/sx = ?Notice that the echo is a sound that is produced when its wave hits an object (Grand Canyon) and returns to the place where it was emitted (person), that is to say that to calculate the time in which the echo arrived effectively to the bottom of the canyon we must divide it by 2.
t(canyon's bottom) = t(echo)/2
t(canyon's bottom) = 5.2 s/2
t(canyon's bottom) = 2.6 s
Applying the velocity formula, and isolating the distance, we get:
v = x /t(canyon's bottom)
x = v * t(canyon's bottom)
x = 340 m/s * 2.6 s
x = 884 m
What is velocity?It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).
Learn more about velocity at: brainly.com/question/3004254
#SPJ4
what is a set of particles or interacting components considered to be a distinct physical entity for the purpose of study.
a system is a collection of particles or interacting parts that is regarded as a unique physical entity for the purposes of study.
What is a physical entity?It is an entity that has a physical existence. An entity is something that exists in itself, real or potential, concrete or abstract, physical or not. It does not have to be of material existence. In particular, legal abstractions and fictions are generally considered entities. Also, in general, an entity is not considered animate. The word entitative is the adjective form of the nominal entity. Something entity is considered for itself. In philosophy, ontology consists in recognizing entities. The words ontic and entity derive from the present participles of ancient Greek and Latin, respectively, meaning being.
To learn more about entity, visit:
https://brainly.com/question/28274289
#SPJ4
19. Jorge was driving at 20m/s. He accelerated at a rate of 2m/s² for 10s. How far did he travel during this time?
Jorge was driving at 20m/s. He accelerated at a rate of 2m/s² for 10s.
So he travel ---m during this time.
Jorge was driving at 20m/s, so speed = 20 units
He accelerated at a rate of 2m/s² so acceleration = 2 units
Time taken by Jorge is 10 units.
We know by Newton's 2nd equation of motion that
S= ut + (1/2)*a*t*t
where S is distance, a is acceleration, u is initial velocity and t is time.
So S=?
Time t = 10
Acceleration a =2
Initial Velocity u = 20
Hence distance travelled by Jorge is S=300 m
Thus Jorge travelled 300m during this time at speed 20m/s accelerated at a rate of 2m/s² for 10s.
To know more about accelerated
https://brainly.com/question/27573481
#SPJ1
an analysis of the advantages and limitations of vacuum tubes in terms of performance and reliability
Vacuum tubes enjoy numerous upper hands over semiconductor gadgets in applications between 300 MHz and 300 GHz.
What is a vacuum tube?A vacuum tube, electron tube, valve (English use), or cylinder (North America), is a gadget that controls electric flow stream in a high vacuum between terminals to which an electric potential distinction has been applied.
The sort known as a thermionic cylinder or thermionic valve uses thermionic emanation of electrons from a hot cathode for basic electronic capabilities like sign intensification and current correction. Non-thermionic sorts, for example, a vacuum phototube, notwithstanding, accomplish electron outflow through the photoelectric impact, and are utilized for such purposes as the discovery of light powers. In the two sorts, the electrons are advanced from the cathode to the anode by the electric field in the cylinder. Sound power speaker utilizing tubes, in activity. Red-orange sparkle is from warmed fibers. Delineation addressing a crude triode vacuum tube and the polarities of the run of the mill dc working possibilities. Not shown are the impedances (resistors or inductors) that would be remembered for series with the C and B voltage sources.
Every group of vacuum tubes (triodes, tetrodes, and their subordinates including magnetrons, klystrons, crossed field speakers, voyaging wave tubes and gyrotrons) have their own qualities as far as working recurrence, quick data transmission, top power, mean power, gain (enhancers), electrical proficiency, linearity, dependability and lifetime. This makes it simpler to choose the most reasonable vacuum tube for a given application.
To learn more about Vacuum tubes ,visit:
https://brainly.com/question/12972120
#SPJ4
During each cycle of operation, a refrigerator absorbs 230 j of heat from the freezer and expels 356 j of heat to the room. how much work input is required in each cycle?
126 J work input is required in each cycle .
Work is the product of the component of the force in the direction of the displacement and the magnitude of this displacement.
Mathematically, the above statement is expressed as follows:
W = (F cos θ) d = F. d
Where,
W is the work done by the force.
F is the force, d is the displacement caused by force
θ is the angle between the force vector and the displacement vector
The dimension of work is the same as that of energy and is given as, [ML2T–2].
Given,
refrigerator absorbs 230 J of heat from the freezer
expels 356 J of heat to the room
work input is required in each cycle = 356 - 230
= 126 J.
To know more about "Work"
Refer this link:
https://brainly.com/question/25573309
#SPJ4
light strikes a 5.0-cm thick sheet of glass at an angle of incidence in air of 50°. the sheet has parallel faces and the glass has an index of refraction 1.50. a. what is the angle of refraction in the glass? b. after traveling through the glass the light re-emerges into the air. what is the final angle of refraction in air? c. as it leaves the glass, by what distance is the path of the ray is displaced from what it was before entering the glass?
The angle of refraction in the glass is 30°.
Calculationi= 50°
u= 1.50
u1sini=u2sinr
⇒sinr =[tex]\frac{sin 50}{1.5\\}[/tex]
=0.50=1/2
so angle r = [tex]sin^{-1}[/tex](0.5) =30°
Then we have to calculate r final.
[tex]u_{glass}[/tex]sini= [tex]u_{air}[/tex] sinr
⇒ r = [tex]sin^{-1}[/tex] (1.5 x [tex]\frac{\sqrt{3} }{2}[/tex])
[tex]sin^{-1}[/tex](1.29) = 0.0225
Then the displacement can be calculated as follows:
T= thickness = 5cm
s= t (1- 1/u)
s= 2cm
Thus, all the values have been found out.
To know more about refraction, visit:
https://brainly.com/question/14760207
#SPJ4
A cross-country skier moves 36 meters eastward, then 44
meters westward, and finally 22 meters eastward.
What is the magnitude and direction of the displacement ?
Answer:
d = 102 m
Explanation:
distance = 36 m + 44 m + 22 m
Distance = 102 m
A ______ focal length lens makes the background and foreground appear closer together.
Short focal length lens makes the background and foreground appear closer together.
What is a short focal length made lens?Short focal length lenses are sometimes known as wide-angle or wide-field lenses, which accurately defines their key characteristic—they view a larger angle of a scene than is typical.
When your eyes are fixed in one place and you look at a scene, a lens with a typical focal length captures what you see.
Are shorter focal lengths preferable?The angle of view is narrower, and the magnification is higher the longer the focal length.
What are short lenses used for?A shorter focal length results in a wider angle of view and a lower magnification.
Because they provide a broad field of view, short focal length lenses are frequently utilized in architectural, documentary, and landscape photography. These telephoto lenses enable
To know more about lens, visit:
https://brainly.com/question/17014859
#SPJ4
Match the type of Entrepreneurship to the description that best fits.
Has an ideal, product or service for the business world
Start up their business due to their lifestyles such as sports hobbies or passions
Has to innovative ideas for social change, solutions, etc.
Has multiple startups do to new ideas.
1. Business Entrepreneur
2. Social Entrepreneur
3. Serial Entrepreneur
4. Lifestyle Entrepreneur
A business entrepreneur has a product or service for the business world, a Social one has ideas for social change, a Serial one has multiple startups and a Lifestyle one starts up their business due to their lifestyles.
A business entrepreneur starts new business with his own money. Some of the famous business entrepreneurs are Steve Jobs, Mark Zuckerberg and Bill Gates. A social entrepreneur develops solutions for social issues and directly addresses them. For example, microfinancing institutions provide banking services to low - income and unemployed people.
A serial entrepreneur can create ideas into successful businesses on a regular basis. They do not stop at one business. Elon Musk is a great example of a serial entrepreneur. A lifestyle entrepreneur creates business to change their lifestyle. A lifestyle entrepreneur does not necessarily make profits. Blogging and photography are some of the examples of lifestyle entrepreneurship.
Therefore,
1. Business Entrepreneur - Has an ideal, product or service for the business world
2. Social Entrepreneur - Has to innovative ideas for social change, solutions, etc.
3. Serial Entrepreneur - Has multiple startups do to new ideas.
4. Lifestyle Entrepreneur - Start up their business due to their lifestyles such as sports hobbies or passions
To know more about entrepreneurships
https://brainly.com/question/13897585
#SPJ1
Answer:
1. Business
2. Social
3. Serial
4. Lifestyle
How is gravity helping to widen the valley of the Colorado River through the Grand Canyon?
Gravity helps to widen the valley of the Colorado River through the Grand Canyon through the forces which increases the pressure thereby leading to it being eroded.
What is Gravity?This is referred to as the force of attraction which occurs on objects which draws them toward the center of the planet.
Gravity acts downwards on all bodies on earth which is why the Colorado River erodes downward. This then results in the movement of materials from high to low areas.
This the leads to the continual widening of the valley of the Colorado River through the Grand Canyon and is therefore referred to as the most appropriate answer.
Read more about Gravity here https://brainly.com/question/940770
#SPJ1
Find the maximum height ymax reached by the rocket. ignore air resistance and assume a constant acceleration due to gravity equal to 9.80 m/s2 .
Answer:
11,907 m is the maximum height ymax reached by the rocket.
Explanation:
The equations which relate displacement, velocity, acceleration and time are known as Equation of Kinematics. In this problem we use second and third equation of kinematics solve,
s = vit+1/2at2
V2f − V2i=2as
It is important to note from the information provided in the question
Acceleration in the first phase a1=49.0m/s2
Time for acceleration t=9.00s
Acceleration in the second phase a2=−9.8 ms-2
Height reached in first phase
y1=vit+1/2a1t2
y1 =0ms-1 × 9.00s + 12×49.0 ms-2 × (9.00s)2
=1984.5m
velocity at the end of first phase
v1=49.0 ms-2 × 9.00s
=441m/s
Now height reached in the second phase
V2f − V21 = 2a2y2
At maximum height final velocity is zero.
=02−(441.0m/s)2
=2(−9.80 ms-2) y2
y2=(0-(441.0 ms-2))/(2×(-9.80ms-2))
=9922.5m
So, the maximum height ymax reached by the rocket
ymax = y1+y2
ymax =1984.5m+9922.5m
=11907m
To learn more about kinematics. Click, https://brainly.com/question/25638908
Where will you store your carolina distance learning kit box when it is not in use, and why?
I will store carolina distance learning kit box in a refrigerator.
To increase their shelf life, they should be refrigerated as soon as they arrive. Keep the lyophilized cultures away from youngsters in a sealed, labeled plastic bag.
What is lyophilized cultures?Bacteria must be suspended in a medium that supports their viability during freezing, water removal, and subsequent storage if they are to be preserved by lyophilization.
The vials should be put within a freeze-dryer chamber, and the chamber should be vacuumed as directed by the manufacturer. Give the culture enough time to fully lyophilize (dry out).
Water is removed from a product after it has been frozen, and it is then placed in a vacuum, allowing the product to convert directly from solid to vapor without going through a liquid phase. This process is known as lyophilization or freeze drying.
To learn more about lyophilized cultures from the given link:
brainly.com/question/13449769
#SPJ4
11. the square of the speed of an object undergoing a uniform acceleration a is some function of a and the displacement s, according to the expression given by
v^2 = k am sn,
where k is a dimensionless constant.
we have to tell the whether it is dimensional or dimensionless
v = m/sec dimesions
a = m/sec^2 dimesion, m = m
v^2 = m^2 / sec^2 = k m/sec^2 * m
k = dimesionless constant.
Dimension is a measurable extent, such as the three principal dimensions of an object of width, height, and depthdimension is of many types radial, angular, linear etc.Reference Dimensions is a Dimension without a tolerance, used for information purposes only. A reference is a repeat of a given dimension or established from other values one dimension is practically not found.To know more about Dimension visit : https://brainly.com/question/1374629
#SPJ4
How many of the 900 positive 3-digit numbers have a units digit of 2 and are the square of an integer?
The simple solution is to count all the integers that only have odd digits and subtract them from 900. Final solution: 900 – 125 = 775.
What are odd digits?Odd and even numbers have opposite parities, therefore 13 is an example of an odd number. In particular, zero has an even parity. The parity of any pair of consecutive integers is opposite. The last digit of an integer stated in the decimal numeral system determines whether the value is even or odd. That example, an odd number is one where the last digit is one, three, five, seven, or nine; otherwise, an even number is one where the last digit is one, two, four, six, or eight.
To learn more about odd digits from the given link:
brainly.com/question/27412698
#SPJ4