To an observer outside the bowl, the goldfish appears closer to the wall than its actual position. It appears at a distance of 6.0 cm from the wall.
This is because light rays from the goldfish traveling through water and striking the bowl's inner surface bend at the water-air interface, due to the change in the medium's refractive index.
The bending of light is known as refraction.
The observer perceives the apparent position of the goldfish by tracing the refracted rays back to the water-air interface.
As a result, the goldfish seems to be closer to the bowl's wall than it really is, by a distance equal to the difference between the actual and apparent distances from the wall.
In this case, that distance is 4.0 cm (10.0 cm - 6.0 cm).
For more such questions on distance, click on:
https://brainly.com/question/26550516
#SPJ11
A force of 540 N is used to stop a car with a mass of 65 kg moving 175 m/s. How long will it take to bring the object to a complete stop?
it would take about 21.0 seconds to bring the car to a complete stop with a force of 540 N, assuming no external factors such as air resistance or friction.
Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. It can be expressed mathematically as F = ma, where F is the net force acting on the object, m is the mass of the object, and a is its acceleration.
We can use the equation for acceleration to solve this problem. The equation is:
a = F/m
where a is the acceleration of the car, F is the force applied to the car, and m is the mass of the car.
Using the given values, we get:
a = 540 N / 65 kg = 8.31 m/s^2
This is the acceleration of the car when the force is applied.
To find the time it takes to bring the car to a complete stop, we can use the kinematic equation:
v = v0 + at
where v is the final velocity of the car (which is zero when it comes to a complete stop), v0 is the initial velocity of the car (175 m/s in this case), a is the acceleration, and t is the time it takes for the car to come to a complete stop.
Substituting the known values, we get:
0 = 175 m/s + (8.31 m/s^2) t
Solving for t, we get:
t = -175 m/s / (8.31 m/s^2) ≈ -21.0 s
The negative sign indicates that the time is in the opposite direction of the car's motion. We know that time cannot be negative, so we discard this solution.
So, it takes approximately:
t = 175 m/s / (8.31 m/s^2) ≈ 21.0 s
to bring the car to a complete stop.
Hence, If there were no outside influences, such as air resistance or friction, the car would come to a complete stop with a force of 540 N in around 21.0 seconds.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
This question will ask you to calculate what fraction of the light from the Sun is intercepted and reflected by the Earth. To get an upper bound let us assume the Earth is perfectly reflective, like it would be if it were covered in clouds. To compute it, compare the cross-section of the Earth (the area of a circle with radius REarth) to the area of a sphere centered on the Sun that has a radius equal to the radius of the orbit of the Earth (meaning, take the ratio of those two numbers). What is the cross-section of the Earth, Au? Select the correct one below: (a) TR Earth (b) 47 REarth (c) R Earth What is the area of a sphere centered on the Sun is with a radius r, Az? Choose the correct one below: (a)tr2 (b) 472 (c) p2 You can easily find sizes and distances on the Internet. Express them in the same units to take a meaningful ratio (meter or kilometers will work best). What is the ratio (A1/A2)? Make sure to have 2 significant digits after the decimal point for the first blank. A1/A2 = x 10
The fraction of light from the Sun intercepted and reflected by the Earth is approximately 4.26 x 10⁻⁵.
To calculate the fraction of light from the Sun intercepted and reflected by the Earth, we need to compare the cross-section of the Earth to the area of a sphere centered on the Sun with a radius equal to the radius of Earth's orbit.
The cross-section of the Earth can be calculated as the area of a circle with radius REarth, which is option (c) R Earth.
The area of a sphere centered on the Sun with a radius r is given by 4πr², where r is the radius of the Earth's orbit. Therefore, the area of the sphere centered on the Sun with a radius equal to the radius of Earth's orbit is 4π(149.6 x 10⁶ km)²= 2.83 x 10²³ m².
The ratio of the cross-section of the Earth to the area of the sphere is A1/A2 = πREarth² / 4πr² = (REarth/r)². Using the radius of Earth's orbit in meters, r = 149.6 x 10⁹ m, and the radius of Earth, REarth = 6,371 km = 6.371 x 10⁶ m, we get A1/A2 = (6.371 x 10⁶ m / 149.6 x 10⁹ m)² = 4.26 x 10⁻⁵.
Therefore, by calculating we can say that the fraction of light is approximately 4.26 x 10⁻⁵.
To know more about the fraction of light refer here :
https://brainly.com/question/15648162#
#SPJ11
6) a metal sphere in free space has a radius of a. a total charge q is placed on the sphere. assume that the resulting surface charge density is distributed uniformly on the surface of the sphere. solve for the electric field vector at the surface of the sphere (just outside the sphere), by using only knowledge of boundary conditions. (note that there is no electric field inside the sphere, due to the faraday cage effect.)
The electric field vector at the surface of the metal sphere (just outside the sphere) is E = q / (4πa²ε₀) in the radial direction away from the center of the sphere.
To determine the electric field vector at the surface of a metal sphere with radius 'a' and a total charge 'q' distributed uniformly on the surface, we will consider the boundary conditions and the fact that there is no electric field inside the sphere (due to the Faraday cage effect).
Step 1: Begin with Gauss's law for electric fields, which states that the electric flux through a closed surface is equal to the enclosed charge divided by the permittivity of free space (ε₀):
Φ = ∮E • dA = Q_enclosed / ε₀
Step 2: Consider a Gaussian surface just outside the metal sphere, such as a slightly larger sphere with radius (a + Δa), where Δa is very small. Since the charge is uniformly distributed, we can treat the electric field E as constant on this Gaussian surface.
Step 3: Calculate the enclosed charge within the Gaussian surface. In this case, it is equal to the total charge on the metal sphere, which is 'q'.
Step 4: Calculate the area of the Gaussian surface, A = 4π(a + Δa)² ≈ 4πa², since Δa is very small.
Step 5: Plug the values into Gauss's law:
E ∮dA = q / ε₀
E(4πa²) = q / ε₀
Step 6: Solve for the electric field E:
E = q / (4πa²ε₀)
So, the electric field vector at the surface is E = q / (4πa²ε₀) in the radial direction away from the center of the sphere.
To know more about the electric field refer here :
https://brainly.com/question/15800304#
#SPJ11
a stock person at the local grocery store has a job consisting of the following five segments:(1) picking up boxes of tomatoes from the stockroom floor(2) accelerating to a comfortable speed(3) carrying the boxes to the tomato display at constant speed(4) decelerating to a stop(5) lowering the boxes slowly to the floor.during which of the five segments of the job does the stock person do positive work on the boxes?a stock person at the local grocery store has a job consisting of the following five segments:(1) picking up boxes of tomatoes from the stockroom floor(2) accelerating to a comfortable speed(3) carrying the boxes to the tomato display at constant speed(4) decelerating to a stop(5) lowering the boxes slowly to the floor.during which of the five segments of the job does the stock person do positive work on the boxes?(1) and (5)(2) and (3)(1) and (2)(1) only(1), (2), (4), and (5)
The stock person at the grocery store does positive work on the boxes of tomatoes during segments (1) and (5) of their job.
When the stock person picks up the boxes from the stockroom floor, they lift the boxes against the force of gravity, which requires them to do positive work on the boxes.
Similarly, when the stock person lowers the boxes slowly to the floor, they are lowering the boxes with control and against the force of gravity, which again requires them to do positive work on the boxes.
The other segments of the job, accelerating to a comfortable speed, carrying the boxes at a constant speed, and decelerating to a stop, do not involve doing positive work on the boxes.
Instead, these segments involve the stock person using force to move the boxes without changing their potential energy, which is a measure of the work done on an object due to its position or configuration.
To know more about gravity refer here:
https://brainly.com/question/31321801#
#SPJ11
Light is a form of ________ radiation.
A) gamma
B) electromagnetic
C) infrared
D) UV
E) X-ray
Light is a form of B) electromagnetic radiation. The different wavelengths of electromagnetic radiation determine their properties, such as their ability to penetrate different materials or interact with different types of matter.
Light is a form of electromagnetic radiation. Electromagnetic radiation is a type of energy that travels through space and includes a wide range of wavelengths, including radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays
Visible light is the range of electromagnetic radiation that can be detected by the human eye and includes the colors of the rainbow.
To know more about electromagnetic radiation visit:-
https://brainly.com/question/10759891
#SPJ11
A skateboarder, with an initial speed of 2.1 m/s, rolls virtually friction free down a straight incline of length 20 m in 3.2 s. At what angle is the incline oriented above the horizontal?
The incline is oriented at an angle of approximately 10.8° above the horizontal.
We can use the equations of kinematics to determine the angle of the incline. The skateboarder is under the influence of gravity and has an initial velocity, so we can use the following equation to solve for the angle:[tex]d = v0t + 0.5at^{2sinθ}[/tex]where [tex]d = 20 m, v0 = 2.1 m/s, t = 3.2 s, a = 9.81 m/s^2[/tex] (acceleration due to gravity), and θ is the angle of the incline above the horizontal.Rearranging the equation, we get:[tex]sinθ = (2d - v0t^2)/2at^2[/tex]Substituting the given values, we get:[tex]sinθ = (2(20 m) - (2.1 m/s)(3.2 s)^2)/(2)(9.81 m/s^2)(3.2 s)^2[/tex]Simplifying, we get:sinθ = 0.188Taking the inverse sine of both sides, we get:θ = 10.8°Therefore, the incline is oriented at an angle of approximately 10.8° above the horizontal.For more such question on angle of incidence
https://brainly.com/question/30402542
#SPJ11
A boy lifts a 17.8kg microwave oven 3.8 meters off the ground How much work did the boy do on the microwave
When a boy lifts a 17.8kg microwave oven 3.8 meters distance off the ground then work did the boy do on the microwave is 662.8 J.
Work done is the amount energy gained (loosed) in bringing the body from initial position to final position. It is denoted by W and its SI unit is joule(J). i.e. Work(W) is force(F) times displacement(s). W=F× s When a body is displaced with 1 newton of force by 1 m, then we can say that work has been done on the body by 1 joule. Writing for it's dimension,
W=F× s
Force has dimension [L¹ M¹ T²]
distance has dimension [L¹]
multiplying both the dimensions Force and Displacement we get, dimension of Work [L² M¹ T²].
given,
m = 17.8 kg
d = 3.8
W = Fd = mg.d = 17.8×9.8×3.8
W = 662.8 J
To know more about Work :
https://brainly.com/question/31050706
#SPJ1.
A cannon is fired from the edge of a small cliff. The height of the cliff is 80. 0 m.
The cannon ball is fired with a perfectly horizontal velocity of 80. 0 m/s.
2. How much time is the cannon ball in the air?
3. How far will the cannon ball fly horizontally before it strikes the
ground?
A proton traveling at 3. 60m/s suddenly enters a uniform magnetic field 0. 750 T, traveling at an angle of 55 degrees.
a) Find the magnitude and direction of the force this magnetic field exerts on the proton.
b) If you can vary the direction of the proton's velocity, find the magnitude of the maximum and minimum forces you could achieve, and show how the velocity should be oriented to achieve these forces.
c)What would the answers to part (a) be if the proton were replaced by an electron traveling in the same way as the proton?
(A).The direction of the magnetic field, the direction your palm faces will be the direction of the force on proton which is 3.33 × 10⁻¹⁹N. (B)The magnitude of the maximum and minimum forces, 4.3254 × 10⁻¹⁹N & zero resp. (C)The direction of the force would be opposite, since the charge of an electron is negative i.e. -4.3254 × 10⁻¹⁹N.
(A) To find the magnitude of the force, we can use the formula for the magnetic force on a moving charged particle in a magnetic field, which is given by:
F = qvBsin(θ)
where:
F is the magnetic force
q is the charge of the particle (in this case, the charge of a proton is +e, where e is the elementary charge)
v is the velocity of the particle
B is the magnetic field
θ is the angle between the velocity of the particle and the direction of the magnetic field
Plugging in the given values:
q = +e = +1.602 × 10⁻¹⁹C (charge of a proton)
v = 3.60 m/s (velocity of the proton)
B = 0.750 T (magnetic field)
θ = 55 degrees (angle between velocity and magnetic field)
We can convert the angle to radians by using the formula:
θrad = θ (π/180)
θrad = 55 (π/180) = 0.95993 radians
Now, can substitute the values into the formula to calculate the magnitude of the force:
F = (1.602 × 10⁻¹⁹C) × (3.60 m/s) × (0.750 T)× sin(0.95993 radians)
F ≈ 3.33 × 10⁻¹⁹ N
(B) The maximum and minimum forces can be achieved when the velocity of the proton is oriented perpendicular (90° ) and parallel (0°) to the direction of the magnetic field, respectively.
Maximum force (Fmax):
If the velocity of the proton is perpendicular to the direction of the magnetic field, the angle theta between the velocity and the magnetic field is 90°.In this case, sin(90° ) = 1, so the formula for the force becomes:
Fmax = q (v × B)
Fmax = (+1.602 × 10⁻¹⁹C )×(3.60 m/s) ×(0.750 T) = 4.3254 × 10⁻¹⁹N
Minimum force (Fmin): If the velocity of the proton is parallel to the direction of the magnetic field, the angle theta between the velocity and the magnetic field is 0 degrees. In this case, sin(0°) = 0, so the force becomes:
Fmin = 0
(C) For an electron, the charge (q) is -e, where e is the elementary charge, equal to 1.602 × 10⁻¹⁹C . The formula for the force remains the same:
F = q (v ×B×sinθ)
F = (-1.602 × 10⁻¹⁹C ) × (3.60 m/s) × (0.750 T) ×sin(55°)
F = -4.3254 × 10⁻¹⁹N
So the magnitude of the force exerted on an electron would be the same as that on a proton, but the direction of the force would be opposite, since the charge of an electron is negative.
To know more about proton
https://brainly.com/question/31431854
#SPJ1
The asteroid Ceres orbits the sun with an orbital period of 4.61 Earth years.
Given:
a. What is the mean radius of Ceres' orbit? (ms = 1.99 x 1030 kg)
b. What is the orbital speed of the asteroid?
Answer:
Explanation:
The mean radius of Ceres' orbit can be calculated using Kepler's Third Law.
b. Explanation: Kepler's Third Law states that the square of the orbital period of a planet (or asteroid in this case) is proportional to the cube of the semi-major axis (mean radius) of its orbit. Mathematically, this relationship can be expressed as:
T^2 = (4π^2 / GM) * r^3
where T is the orbital period, G is the gravitational constant, M is the mass of the sun, and r is the mean radius of the orbit.
Given that Ceres has an orbital period of 4.61 Earth years, we can substitute this value into the equation and solve for the mean radius (r).
T^2 = (4π^2 / GM) * r^3
(4.61 years)^2 = (4π^2 / G * (mass of sun)) * r^3
Solving for r, we get:
r = [(T^2 * G * (mass of sun)) / (4π^2)]^(1/3)
Plugging in the known values for G (gravitational constant) and the mass of the sun, and using the appropriate units, we can calculate the mean radius of Ceres' orbit.
To learn more about Kepler's Third Law and how it is used to calculate orbital parameters, you can refer this https://brainly.in/question/15032984#:~:text=K%20people%20helped-,Answer%3A,of%20their%20mean%20orbit%20radius..
a step-down transformer is used for recharging the batteries of portable devices such as tape players. the turns ratio inside the transformer is 13:1 and is used with 120-v (rms) household service. if a particular tape player draws 0.35 a from the house outlet, what are (a) the voltage and (b) the current supplied from the transformer? (c) how much power is delivered?
How long does it take a radio signal from Earth to reach the Moon, which has an orbital radius of approximately 3.84 x10^8 m?
The time it takes for a radio signal to travel from Earth to the Moon depends on various factors such as the distance between the two celestial bodies, the speed of the radio signal, and the interference along the way. Since the Moon has an orbital radius of approximately 3.84 x 10^8 m.
The speed of a radio signal in a vacuum is approximately 299,792,458 m/s. If we assume that the Moon is at its closest point to the Earth, which is about 363,104 km, it would take a radio signal of approximately 1.28 seconds to travel from Earth to the Moon. On the other hand, if the Moon is at its farthest point from the Earth, which is about 405,696 km, it would take approximately 1.42 seconds for a radio signal to travel from Earth to the Moon.
However, it is essential to note that the time taken for a radio signal to travel from Earth to the Moon can vary depending on several factors such as the strength of the signal and the interference along the way. In general, the radio signal takes around 1.28 to 1.42 seconds to reach the Moon from Earth, depending on the distance between the two celestial bodies.
Learn more about celestial bodies here:
https://brainly.com/question/28876984
#SPJ11
in the circuits shown, the brightness of the bulbs is observed to compare as follows: a is the brightest, and b and c are equally bright and dimmer than a (a>b=c)
In the given circuit, bulb A is the brightest, while bulbs B and C have equal brightness that is dimmer than A (A > B = C).
This observation indicates that bulb A has the highest current passing through it, while bulbs B and C share a lower current equally. This could be due to bulb A being part of a parallel circuit branch, while bulbs B and C are connected in series in another branch.
In parallel circuits, the voltage across each bulb is the same, leading to higher brightness, whereas in series connections, the voltage divides across the bulbs, resulting in lower brightness. However, because they have a lower resistance than bulb a, they are both dimmer than bulb a.
Bulbs b and c have equal resistance, which means they share the same amount of current and are therefore equally bright.
Thus, we can conclude that bulb a has a higher resistance than bulbs b and c.
To know more about parallel circuits click here:
https://brainly.com/question/11409042
#SPJ11
Bulb A is brighter than B or C because the current is greater through A than B or C.
Bulb A is brighter than B or C because the circuit containing bulb A has overall less resistance.
Bulb A is brighter than B or C because bulb B and C get only half the current from the batter, while A get all of it.
Why is bulb A brighter than B or C?The current flowing through the circuits is directly proportional to the potential difference across the circuit.
I = V/R
where;
V is the voltageR is the resistanceFrom the circuit diagram, bulb A is connected to one battery while bulb B and C are connect to one batter as well.
Also bulb B and C are connect in series, so both bulbs (B and C) share the current delivered by the one battery equally.
The current received by each bulb B and C is calculated as;
I(B) + I(C) = V/R = I
I(B) = I(C) = I/2
I/2 + I/2 = I
where;
I/2 is each current flowing in bulb B and C.V is the voltage delivered by the one batteryThe bulb A on the other hand, gets all the current delivered by the one battery, and hence shines the brightest.
Learn more about bulbs in series here: https://brainly.com/question/19865219
#SPJ4
4. Scenario: A car runs into a truck.
a. Identify two objects that are interacting (colliding) in this scenario)
One object is...
The other object is...
b. Identify the action and the reaction forces.
One object is a car and the other object is a truck. The action will be from the car while the reaction will be from the truck.
What happens when the objects collide?When the objects collide then one will be acting on the other while the receiver of the force reacts to it. After a collision, Newton's third law of motion comes into play.
At this time, the second body, the truck will exert a force that is the same in magnitude and opposite in the direction of the car which initiated the action. From this law of motion, we can deduce the actor and reactor.
Learn more about collisions here:
https://brainly.com/question/24915434
#SPJ1
the following questions refer to a situation in which you are riding in a car that crashes into a solid wall. the car comes to a complete stop without bouncing back. the car has a mass of 1500 kg and has a speed of 30 m/s before the crash (this is about 65 mi/hr).
The questions are about a car crashing into a solid wall, and relate to initial and final momentum, net impulse, and the objects exerting force and causing impulse to stop the car and the rider.
Let's see the solutions to the following questions :
1. The car's initial momentum is 45,000 kgm/s and your initial momentum is zero. The change in the momentum of the car and you is also 45,000 kgm/s in opposite directions.
2. The net impulse acting on the car and you is both 1,350,000 N*s, which does not depend on the details of the crash as it is determined solely by the change in momentum.
3. The wall exerts the force that causes the impulse that brings the car to a stop, while the seatbelt and/or dashboard exerts the force that causes the impulse that brings you to a stop. Different scenarios may involve different objects exerting forces, but the net impulse and change in momentum will still be the same.
To know more about the momentum refer here :
https://brainly.com/question/29113044#
#SPJ11
The following questions refer to a situation in which you are riding in a car that crashes into a solid wall. The car comes to a complete stop without bouncing back. The car has a mass of 1500 kg and has a speed of 30 m/s before the crash (this is about 65 mi/hr).
1. What is the car’s initial momentum? What is your initial momentum? (Recall that the weight of one kilogram is 2.2 lbs) What is the change in the momentum of the car? What is the change in your momentum?
2. What is the net impulse that acts on the car to bring it to a stop? What is the net impulse that acts on you to bring you to a stop? Do these numbers depend on the details of the crash? Why or why not?
3. What object exerts the force that causes the impulse that brings the car to a stop? What object exerts the force that causes the impulse that brings you to a stop? Describe several scenarios that might exist here and describe the object in each case. One scenario should be that you remain buckled into the seat and that the seat remains attached to the center of the car (what happens to the length of the car between you and the front bumper?). Another scenario should be that you are not buckled into your seat.
a bullet of mass mb is fired horizontally with speed vi at a wooden block of mass mw resting on a frictionless table. the bullet hits the block and becomes completely embedded within it. after the bullet has come to rest relative to the block, the block, with the bullet in it, is traveling at speed vf
When the bullet of mass mb is fired horizontally with speed vi, it possesses a certain amount of kinetic energy. Upon hitting the wooden block of mass mw, some of this kinetic energy is transferred to the block, causing it to move.
As the bullet becomes completely embedded within the block, it also transfers its momentum to the block, leading to an increase in its velocity.
The final velocity of the block with the embedded bullet, vf, can be calculated using the law of conservation of momentum, which states that the total momentum of the system remains constant unless acted upon by an external force.
In this case, the momentum of the bullet and block before the collision is equal to the momentum of the block with the embedded bullet after the collision.
Hence, we can say that the increase in velocity of the block is due to the transfer of momentum and kinetic energy from the bullet to the block. The absence of friction ensures that the kinetic energy is conserved and not lost to the surroundings in the form of heat or sound.
To know more about kinetic energy refere here:
https://brainly.com/question/26472013#
#SPJ11
A merry-go-round is rotating at constant angular speed. two children are riding the merry-go-round: ana is riding at point a and bobby is riding at point b. 1. which child moves with greater magnitude of linear velocity? a. ana has the greater magnitude of linear velocity. b. bobby has the greater magnitude of linear velocity. c. both ana and bobby
In a merry-go-round rotating at constant angular speed, two children Ana and Bobby are riding at different points A and B, respectively.
The linear velocity of a point on a rotating object depends on its distance from the center of rotation and the angular velocity of the object. The farther a point is from the center of rotation, the greater its linear velocity.
Therefore, the child riding at the outermost point, which is Bobby in this case, will have a greater magnitude of linear velocity compared to the child riding at the innermost point, which is Ana.
Thus, option (b) is correct - Bobby has the greater magnitude of linear velocity. This concept is important in understanding centripetal force and its effects on objects in circular motion.
To know more about the angular speed refer here :
https://brainly.com/question/31642620#
#SPJ11
Natural barriers such as trees and hills, and man-made barriers such as walls, can minimize electric fields, but magnetic fields cannot be shielded. To reduce exposure, consumers should do which of the following?
a.Avoiding sleeping near electrical appliances
b.Choose laptops over PCs
c.Clean gutters and drains
d.Convert to gas heat
To reduce exposure to electric and magnetic fields, it is advisable to a.Avoiding sleeping near electrical appliances, as they are common sources of these fields. This will help minimize your exposure and promote a healthier living environment.
To address your question, it is important to understand the difference between electric fields and magnetic fields. Electric fields are produced by electric charges, whereas magnetic fields are produced by the motion of these electric charges. Natural barriers like trees and hills, as well as man-made barriers like walls, can minimize electric fields but are less effective against magnetic fields.
To reduce exposure to these fields, consumers should focus on the sources that produce them. The best option among the given choices is:
a. Avoiding sleeping near electrical appliances
This is because electrical appliances generate both electric and magnetic fields when they are in operation. By keeping a distance from them, especially during sleep, you can minimize your exposure to these fields.
While choosing laptops over PCs (option b) might seem like a good idea, it is not the most effective way to reduce exposure to electric and magnetic fields. Laptops still produce these fields, albeit at lower levels than PCs. Additionally, options c (clean gutters and drains) and d (convert to gas heat) do not directly relate to minimizing exposure to electric and magnetic fields.
To learn more about magnetic fields, refer:-
https://brainly.com/question/23096032
#SPJ11
11. A body of mass m=4kg moves on a smooth horizontal plane. When it passes through point A, the velocity of the body is u = 10m/s. At point A, a horizontal force of magnitude F=80N is applied to the body in the same direction as that of the velocity u. After a distance of s=2m from point A, the velocity of the body becomes u =12m/s. Calculate: A) the sliding friction exerted on the body. B) the velocity of the body after a distance of s2=4m from point A.
The sliding friction exerted on the body is 64N.
The velocity of the body after a distance of 4m from point A is 11.5 m/s.
What is the sliding friction exerted on the body?The sliding friction exerted on the body is determined as follows:
F - f = ma
where;
F is the net force acting on the bodyf is the force of sliding frictionm is the mass of the body, anda is the acceleration of the body.At point A, u = 10m/s and F=80N
80 - f = 4a
To find, we use the formula below:
v² = u² + 2as
where;
v is the final velocityu is the initial velocitys is the distance traveled from point A.Substituting the value:
12² = 10² + 2 * 2a
a = 4m/s²
Then solving for f
80 - f = 4 * 4
f = 64N
The velocity of the body after a distance of s₂ = 4m from point A is calculated as follows:
v² = u² + 2as
substituting the values
v² = 10² + 2 * 4 * 4
v² = 132
v = 11.5 m/s
Learn more about sliding friction at: https://brainly.com/question/17140804
#SPJ1
(0)
1.If you had access to a thermometer, water of various temperatures, a scale and a calorimeter, devise a plan to determine the specific heat of the calorimeter. Derive an equation to use for your plan.
2.Using the same calorimeter, the materials above and some ice, devise a plan to determine the Latent heat of fusion of ice.
To determine the specific heat of the calorimeter:
Fill the calorimeter with a known mass of water (m1) at a known initial temperature (T1).
Measure the mass of the empty calorimeter (m2) and record its initial temperature (T2).
Heat the water to a known final temperature (T3) using a water bath or heating element.
Measure the final mass of the calorimeter and water (m3).
Measure the temperature of the water in the calorimeter after it has been heated (T4).
Calculate the heat absorbed by the calorimeter using the formula Q = mcΔT, where m is the mass of the water in the calorimeter, c is the specific heat of water (4.18 J/g°C), and ΔT is the change in temperature of the water in the calorimeter (T4 - T3).
Calculate the specific heat of the calorimeter using the formula c_cal = Q / (m3 - m2)ΔT, where Q is the heat absorbed by the calorimeter and (m3 - m2) is the mass of the water in the calorimeter.
The equation to use for this plan is: [tex]c_cal[/tex]= Q / (m3 - m2)ΔT
To determine the latent heat of fusion of ice:
Fill the calorimeter with a known mass of water (m1) at a known initial temperature (T1).
Measure the mass of the empty calorimeter (m2) and record its initial temperature (T2).
Add a known mass of ice (m3) to the calorimeter.
Measure the final mass of the calorimeter, water, and melted ice (m4).
Measure the final temperature of the water in the calorimeter (T3).
Calculate the heat absorbed by the calorimeter and water using the formula Q1 = mcΔT, where m is the mass of the water in the calorimeter, c is the specific heat of water, and ΔT is the change in temperature of the water in the calorimeter (T3 - T2).
Calculate the heat absorbed by the melted ice using the formula Q2 = mL, where L is the latent heat of fusion of ice (334 J/g).
Calculate the total heat absorbed by the system using the formula [tex]Q_total[/tex]= Q1 + Q2.
Calculate the mass of the melted ice using the formula [tex]m_ice[/tex]= m3 - (m4 - m2).
Calculate the latent heat of fusion of ice using the formula L = Q2 / [tex]m_ice.[/tex]
The equation to use for this plan is: L = Q2 / [tex]m_ice[/tex]
Learn more about calorimeter,
https://brainly.com/question/4802333
#SPJ4
Full Question ;
1.If you had access to a thermometer, water of various temperatures, a scale and a calorimeter, devise a plan to determine the specific heat of the calorimeter. Derive an equation to use for your plan.
2.Using the same calorimeter, the materials above and some ice, devise a plan to determine the Latent heat of fusion of ice.
find the total (resultant) force and the total (resultant) moment about point a of the given forcing system note that in statics study the original complex forcing system can be replaced by this simple system of a single point force and a single moment about a only.
In order to calculate the total force and moment around point A, we must first simplify the system into a single point force and a single moment around point A. This point force is determined by adding all individual forces in the system using vector addition. The resultant force has both magnitude and direction.
The single moment about point a is the sum of all the moments of the individual forces in the system about point a. We can add the moments using the right-hand rule to get the resultant moment. The resultant moment will have a magnitude and direction.
Once we have the single point force and single moment, we can find the total (resultant) force and moment about point a using the following equations:
Resultant force = single point force
Resultant moment about point a = single moment about point a
By simplifying the forcing system to a single point force and a single moment about point a, we can easily calculate the total force and moment about point a.
To know more about the total force refer here :
https://brainly.com/question/30149537#
#SPJ11
a person standing on a building ledge throws a ball vertically from a launch position 47 m above the ground. it takes 2.0 s for the ball to hit the ground. for the steps and strategies involved in solving a similar problem, you may view the following worked example 3.6 video: select to launch worked example 3.6 video part a with what initial speed was the ball thrown? express your answer with the appropriate units. enter a positive value if the initial speed is upward and a negative value if the initial speed is downward. activate to select the appropriates template from the following choices. operate up and down arrow for selection and press enter to choose the input value typeactivate to select the appropriates symbol from the following choices. operate up and down arrow for selection and press enter to choose the input value type v
The initial speed with which the ball was thrown is 21.7 m/s.
What is the initial speed of the ball thrown?The initial speed of ball thrown is 21.7 m/s.
To solve this problem, we can use the kinematic equation for free fall:
[tex]y = v_it + 1/2g*t^2[/tex]
where,
y is the displacement (in this case, the height of the building ledge),v_i is the initial velocity, t is the time,g is the acceleration due to gravity (9.81 m/s^2)and we know y = 47 m and t = 2.0 s.
Rearranging the equation and solving for v_i, we get:
[tex]v_i = (y - 1/2gt^2) / tv_i = (47 m - 1/29.81 m/s^2(2.0 s)^2) / 2.0 sv_i = 21.7 m/s[/tex]
Therefore, the initial speed with which the ball was thrown is 21.7 m/s. We can see that this velocity is positive, indicating that the ball was thrown upward from the building ledge.
Learn more about Initial speed
brainly.com/question/29187983
#SPJ11
Resistance is measured in
A) ohms
B) volts
C) amperes
D) Faradays
E) joules
Answer:
Resistance is measured in ohms
Please Help!
show all work, please thank you.
The magnitude of the force between the two charges is 810 N.
What is the magnitude of force between the two charges?
The magnitude of force between the two point charges is calculated by applying Coulomb's law as follows;
F = kq²/r
where;
k is Coulomb's constantq is the charger is the distance between the chargesF = ( 9 x 10⁹ x 7.5 x 10⁻⁶ x 7.5 x 10⁻⁶) / (25 x 10⁻³)²
F = 810 N
Thus, the magnitude of the force between the two charges is determined by applying Coulomb's law.
Learn more about electric force here: https://brainly.com/question/17692887
#SPJ1
THIS IS PART OF YOUR PRAC APP:
Given 5.9V and 3.02amps for a rectifier.
If the present rectifier voltage output remains constant, calculate current output if the circuit resistance of the cathodic protection system doubles
A) 5.0A
B) 6.04A
C)1.5A
D) 3.2A
E) 2.2A
The correct answer is option C) The current output would be 1.51 amps if the circuit resistance of the cathodic protection system doubles.
The current output (I) of a circuit can be calculated using Ohm's Law, which states that I = V/R, where V is the voltage and R is the resistance. In this case, the voltage output of the rectifier is 5.9V and the current output is 3.02A. If the circuit resistance doubles, the new resistance would be 2R, where R is the original resistance. To calculate the new current output, we can use the formula [tex]I = V/(2R) = (1/2)*(V/R) = (1/2)*3.02A = 1.51A[/tex]. As the resistance of the circuit increases, the current output decreases proportionally, according to Ohm's Law.
learn more about circuit resistance here:
https://brainly.com/question/27206933
#SPJ11
A 3.1-kg box is sliding along a frictionless horizontal surface with a speed of 1.8 m/s when it encounters a spring. (a) Determine the force constant of the spring, if the box compresses the spring 5.3 cm before coming to rest. N/m (b) Determine the initial speed the box would need in order to compress the spring by 1.6 cm. m/s
(a) The force constant of the spring, if the box compresses the spring 5.3 cm before coming to rest is 1020 N/m.
(b) The initial speed required to compress the spring by 1.6 cm is 0.68 m/s.
(a) To determine the force constant of the spring, we can use the conservation of mechanical energy, assuming that there is no energy lost due to friction or other dissipative forces. At the moment when the box comes to rest, all of its kinetic energy will have been transferred to the spring, causing it to compress. We can write:
[tex](1/2)mv^2 = (1/2)kx^2[/tex]
where m is the mass of the box, v is its initial speed, x is the distance that the spring compresses, and k is the force constant of the spring.
Substituting the given values, we get:
[tex](1/2)(3.1 kg)(1.8 m/s)^2 = (1/2)k(0.053 m)^2[/tex]
Solving for k, we get:
[tex]k = (0.5)(3.1 kg)(1.8 m/s)^2 / (0.053 m)^2 = 1020 N/m[/tex]
Therefore, the force constant of the spring is 1020 N/m.
(b) To determine the initial speed required to compress the spring by 1.6 cm, we can use the same equation as above, but with the new value of x:
[tex](1/2)mv^2 = (1/2)kx^2[/tex]
Substituting the given values, we get:
[tex](1/2)(3.1 kg)v^2 = (1/2)(1020 N/m)(0.016 m)^2[/tex]
Solving for v, we get:
v = [tex]\sqrt{[(1020 N/m)(0.016 m)^2 / 3.1 kg[/tex]] = 0.68 m/s
Therefore, the initial speed required to compress the spring by 1.6 cm is 0.68 m/s.
For more such questions on Spring.
https://brainly.com/question/20368777#
#SPJ11
Use appropriate algebra and theorem 7. 2. 1 to find the given inverse laplace transform. (write your answer as a function of t. ) ℒ−1 5s − 8 s2 16
The given inverse Laplace transform is: ℒ⁻¹ {5s - 8 / (s² + 16)}
The inverse Laplace transform of a function F(s) can be found using the partial fraction decomposition and the inverse Laplace transform pairs. The partial fraction decomposition of the given function is:
5s - 8 / (s² + 16) = A(s - α) / (s² + 16) + B
where α is the root of the denominator s² + 16, and A and B are constants.
Multiplying both sides by (s² + 16) and setting s = α and s = 0 gives:
α = 0, A = -1/2
B = 1/2
Therefore, the partial fraction decomposition is:
5s - 8 / (s² + 16) = (-1/2)(s - 0) / (s² + 16) + 1/2
Using the inverse Laplace transform pairs, the inverse Laplace transform of each term is:
ℒ⁻¹ {(-1/2)(s - 0) / (s² + 16)} = -1/2 cos(4t)
ℒ⁻¹ {1/2} = 1/2 δ(t)
where δ(t) is the Dirac delta function.
Therefore, the inverse Laplace transform of the given function is:
ℒ⁻¹ {5s - 8 / (s² + 16)} = -1/2 cos(4t) + 1/2 δ(t)
learn more about Inverse laplace transform here:
https://brainly.com/question/30404106
#SPJ4
Answer the following questions about the Earth in Space. Type your answer below each question and change the text color (blue). Answer the questions in 2-3 sentences.
Describe the distance of the earth from the sun
Illustrate the size and shape of the earth.
What happens as the earth revolves around the sun?
Why do we have leap years?
How does the earth’s motion affect seasons on earth?
The Earth orbits the sun at a distance of around 93 million miles (149.6 million kilometers). This is known as an astronomical unit (AU).
What is the shape of the Earth?With a diameter of 12,742 kilometers (7,918 miles), the Earth is basically spherical. It has a bulge near the equator and a slight flattening at the poles.
Seasons change as the Earth rotates around the Sun due to its leaning position of 23.5-degree axial tilt. Summer occurs when the sun is facing the hemisphere, while winter happens in the other hemisphere.
Leap years are added to the calendar to account for the extra quarter of a day that it takes the Earth to orbit around the Sun. Without leap years, our calendars would fall out of sync with the seasons.
The Earth's motion affects the seasons on Earth due to the axial tilt mentioned earlier. The hemisphere tilted towards the Sun experiences more direct sunlight, causing it to be warmer and experience summer, while the hemisphere tilted away experiences less direct sunlight and cooler temperatures, causing winter.
Find out more on Earth in Space here: https://brainly.com/question/23989443
#SPJ1
Determine the circuit rating for the following appliances or equipment on a 120/240 V circuit using table 12 from chapter 16
a. Household range.
b. Trash compactor.
c. Household clothes washer.
d. Household clothes dryer (electric).
e. Central air conditioner (5-ton)
The circuit rating for a household range would be 40 amperes (A) (8.75 kW ÷ 240 V = 36.5 A, which is then rounded up to the next standard size of 40 A).
a. The circuit rating for a household range would be 40 amperes (A) (8.75 kW ÷ 240 V = 36.5 A, which is then rounded up to the next standard size of 40 A).
b. The circuit rating for a trash compactor would be 15 amperes (A) (1.4 kW ÷ 120 V = 11.7 A, which is then rounded up to the next standard size of 15 A).
c. The circuit rating for a household clothes washer would be 15 amperes (A) (1.2 kW ÷ 120 V = 10 A, which is then rounded up to the next standard size of 15 A).
d.The circuit rating for a household clothes dryer would be 30 amperes (A) (5.5 kW ÷ 240 V = 22.9 A, which is then rounded up to the next standard size of 30 A).
e. The circuit rating for a central air conditioner would be 60 amperes (A) (14.5 kW ÷ 240 V = 60.4 A, which is then rounded up to the next standard size of 60 A).
A circuit refers to a closed loop of electrical components that allows for the flow of electric current. A circuit typically consists of a power source (such as a battery or generator), wires or conductors to connect the components, and various electrical components such as resistors, capacitors, and switches.
Electric current flows through the circuit in response to a voltage difference created by the power source. The flow of current can be influenced by the properties of the components in the circuit, such as their resistance or capacitance, which can affect the amount of current that flows through them. Circuits can be designed and analyzed using principles of circuit theory, which involves the use of mathematical equations and models to predict the behavior of the circuit.
To learn more about Circuit visit here:
brainly.com/question/27206933
#SPJ4
What is the wavelength of a 2.50-kilohertz sound wave traveling at 326 meters per second through air?
A: 0.130 m
B: 1.30 m
C: 7.67 m
D: 130 m
The wavelength of the 2.50-kilohertz sound wave traveling at 326 meters per second through air is approximately 0.130 meters.
The required formula is:
Wavelength = Speed of sound / Frequency
We need to convert the frequency to Hz, so we multiply by 1000:
Wavelength = 326 m/s / 2500 Hz = 0.1304 meters
Rounding to three significant figures, the answer is: 0.130 m
To learn more about frequency, click here:
https://brainly.com/question/5102661
#SPJ4