A giant treasure chest is sitting in the sand, when two rival groups of pirates (the sharks and the squids) come upon it at the same time from opposite directions. Both groups run forward and each pirate grabs a side. On the shark’s side, they have one pirate pulling with 20N, one with 30N, one with 50N, and one with 10N. On the squid’s side, they have one pirate pulling with 10N, one with 25N, one with 30N, and one with 40N.

Which team is able to pull harder?

What is the net force experienced by the chest?

If the chest weighs 100 kg, how fast is it accelerating?

Answer:

A cell is the basic block of life and is always changing to fit its environment.

Explanation:

A cell is the basic founding block of a living organisms. In other words, a cell is the basic membrane  unit which contains fundamental molecules of life. It is the cell that all living things are composed of.

The cell always changes with the surroundings and environment and it adapts to it. The cells requires a constant adjustments as the conditions inside and the outside the cells changes to keep a stable internal environment. Because the environment internally and externally is always changing, the cell continuously make adjustments to stay at or the near the set point.

Answer: Fibres are very thin, thread-like strands from which fabrics or cloth is made. Examples of fibres are cotton, wool, silk, flax, jute, nylon, polyester, polyacrylic. The fibres are spun into yarn which can then be woven on a Loom to make a fabric or cloth

Explanation:

Answer:

Mechanical waves

Electromagnetic waves

Matter waves

Longitudinal waves

Transverse waves

Surface waves

Explanation:

Pls give Brainliest!!

Answer:

False.

Explanation:

The layer beneath the another rock will be older. The sequence will not matter in the layers of the rock. The layer inside will be older than the upper layer. This is called law of Superposition. Sedimentary rocks forms the youngest layer of the rocks.

Answer: kinetic energy is Energy of motion.

Explanation:

Answer:

\

\

\

Explanation:

Answer:

HCI

Explanation:

I dont know what you mean by coefficient but that's the thing you would see in the periodic table

Answer:

A toaster because you plug it up for electric energy and heat to toast it

Answer:

B: Salt

Explanation:

I answered this correct beforehand.

Answer:

Physics can help you in your everyday life.

Explanation:

It can also help you in life treating situations.

The distance traveled by the train is 900 m.

The given parameters:

The distance traveled by the train is calculated as follows;

[tex]s = ut + \frac{1}{2} at^2\\\\s = (15 \times 20) + (0.5 \times 3 \times 20^2)\\\\s = 900 \ m[/tex]

Thus, the distance traveled by the train is 900 m.

Learn more about distance here: https://brainly.com/question/23848540

Answer:

900m

Explanation:

Use the equation: acceleration (a) = change in velocity (v – u) / time taken (t)

Rearrange to solve for the final velocity (v):

v = u + at

Substitute in values and solve:

v = 15 m/s + 3 m/s2 × 20 s = 75 m/s

Rearrange the equation for uniform acceleration (v2 – u2 = 2as) to solve for distance (s):

s = (v2 – u2) / 2a

s = ((75 m/s)2 – (15 m/s)2) / (2 × 3 m/s2)

s = (5,625 m2/s2 – 225 m2/s2) / 6 m/s2

s = 5400 m2/s2 / 6 m/s2

s = 900 m

Answer:

8.1 g/cm³

Explanation:

The following data were obtained from the question:

Mass of cinnabar = 251.1 g

Volume of cinnabar = 31 cm³

Density of cinnabar =?

Density of a substance is simply defined as the mass of the substance per unit volume of the substance. It can be represented mathematically as:

Density = mass / volume

Using the above equation, we can obtain the density of the cinnabar as follow:

Mass of cinnabar = 251.1 g

Volume of cinnabar = 31 cm³

Density of cinnabar =?

Density = mass / volume

Density of cinnabar = 251.1 / 31

Density of cinnabar = 8.1 g/cm³

Thus, the density of the cannabar is 8.1 g/cm³

Answer: correct me if i'm wrong but is it 0.361N

Answer:

Explanation:

The gravitational force between two objects becomes weaker if the two objects are moved apart and stronger if they are brought closer together; that is, the force depends on the distance between the objects.

The gravitational force between two objects as the bodies become closer to each other increases.

Gravitational force is force of attraction between two masses. Gravitational force(F) between two bodies is directly proportion to the product of masses(m₁,m₂) of two bodies and inversely proportional to square of distance(r) between them. mathematically it is written as,

F ∝ m₁.m₂

F ∝ 1/r²

F = G m₁,m₂÷r²

where G is gravitational constant, whose value is 6.6743 × 10⁻¹¹ m³ kg-1s⁻².

Force is expressed in Newton N in SI unit. its dimensions are [M¹L¹T⁻²].

As distance decreases the Force increases

To know more about Force :

https://brainly.com/question/30507236

#SPJ2.

Answer:

 y =  [tex]-\frac{1}{4}[/tex]x + 3

Explanation:

The equation of a straight line is given as:

              y  =  mx + c

y and x are the coordinates

m is the slope

c is the y -intercept

 The y-intercept = 3;

Slope  = [tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} }[/tex]

x₁ = 0

x₂ = 4

y₁ = 3

y₂ = 2

 Slope = [tex]\frac{2-3}{4 -0 }[/tex]  = [tex]-\frac{1}{4}[/tex]

       y = mx + c

       y =  [tex]-\frac{1}{4}[/tex]x + 3

The initial vertical velocity of a ball thrown horizontally with an initial velocity of 20 m/s from the top of a 60 m high tower is 0 m/s (option a).  

The ball is thrown horizontally, so its velocity will have only components in the x-direction (horizontal). The components of the initial velocity in the y-direction (vertical) will be zero.    

For a ball's velocity to have components in the vertical and horizontal direction, the ball must be thrown at a certain angle to the ground, describing a parabolic movement.

In a parabolic movement, the vertical and horizontal components of the velocity would be:

[tex] v_{x} = v_{i}cos(\theta) [/tex]

[tex] v_{y} = v_{i}sin(\theta) [/tex]

Where:

[tex] v_{i} [/tex]: is the initial velocity

θ: is the angle

Therefore, the initial vertical velocity of the ball is zero (option a).

Find more here:

https://brainly.com/question/11049671?referrer=searchResults

I hope it helps you!

Answer:

answer is 66 kilograms-force = 647.2389 newtons

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 646.8 \ Newtons }}[/tex]

Explanation:

Weight in Newtons can be found by multiplying the mass times the acceleration of gravity.

[tex]W=m*g[/tex]

The mass of the man is 66 kilograms on Earth.

Earth has an acceleration of gravity that is 9.8 meters per square second.

[tex]m= 66 \ kg \\g=9.8 \ m/s^2[/tex]

Substitute the values into the formula.

[tex]W=66 \ kg *9.8 \ m/s^2[/tex]

Multiply.  

[tex]W=646.8 \ kg*m/s^2[/tex]

1 kg * m/s² is equal to 1 Newton, therefore our answer of 646.8 kg *m/s² is also equal to 646.8 Newtons, or N.

[tex]W=646.8 \ N[/tex]

The man's weight in Newtons in 646.8 Newtons.

Answer:

I think A. would be brighter

Explanation:

Circuit A has only one bulb so it gets 100% of the electricity

Circuit B has two bulbs which means that they only get 50% of the electricity because it has to be split equally.

Hope it helps!

Answer : 16 m/s east

Explanation: Trust the process!!

From the frame of reference of runner 1, the velocity of runner 2 will be D) 16 m/s east

The relative velocity is defined as the velocity of an object with respect to another observer

When two bodies are moving in opposite directions , relative velocity get added and if bodies are moving in same direction , relative velocity will get subtracted .

From the frame of reference of runner 1, the velocity of runner 2 will be

v (relative) = v1 + v1

v1 = velocity of runner 1  = 11m/s west

v2 = velocity of runner 2 = 5m/s

v = 11 + 5 = 16 m/s

correct answer will be O D. 16 m/s east as runner 2 is running in east direction

learn more about relative velocity

https://brainly.com/question/12109673?referrer=searchResults

#SPJ2

Answer:

24

Explanation:

Given parameters:

Load  = 7406N

Effort  = 308.6N

Unknown:

The mechanical advantage of the block and tackle system = ?

Solution:

Mechanical advantage is the ability of a simple machine to amplify or increase the force needed to do work.

  Mathematically;

     M.A = Output force / Input force

Output force  = Load

Input force  = Effort

     M.A = 7406N / 308.6N  = 24

The mechanical advantage is 24

Answer:

1) τ = I α    whereby the torque is provided by the angular acceleration

2)  L = 216 Kg m² / s

Explanation:

1) Let's start with Newton's second law

       F = m a

multiply by the arm or perpendicular distance

       F r = m a r

if the distance is not perpendicular a way of realizing the relations using the vector product

      τ = F r = F x r

the bold are vectors.  The angular and linear acceleration are related

       a = α r=

      τ = m (α r) r

      τ = (m r²) α

the inertia of the rotational motion is

        I = m r²

we substitute

       τ = I α

whereby the torque is provided by the angular acceleration.

As an example we have:

* a spinning disk

* a ball rotating in the air

* a pulley

2) The rotational momentum is

           L = I w

the moment of inertia of a rod that through its center

           I = m L²

we substitute

           L = m L² w

let's calculate

          L = 6 1.5 2 16

          L = 216 Kg m² / s

La cantidad de movimiento angular de la varilla uniforme es 18 kilogramos-metro cuadrado por segundo.

1) La relación entre el momento de torsión ([tex]M[/tex]), una variable cinética y relacionada con la aplicación de una fuerza externa cuya línea de proyección no cruza el centro de masa del objeto, y la aceleración angular ([tex]\alpha[/tex]), una variable cinemática, es la resistencia del cuerpo a rotar, la cual es función de su masa y su geometría, representada por la variable de momento de inercia.

A continuación, presentamos tres ejemplos del concepto:

2) Asumamos que la varilla uniforme es de masa constante, con una rotación a velocidad angular constante y con un centro de rotación localizado en el centro geométrico de la varilla. La cantidad de movimiento es expresada mediante la siguiente ecuación:

[tex]L = I\cdot \omega[/tex] (1)

Donde:

El momento de inercia de una varilla uniforme con centro de rotación en el centro queda expresado por la siguiente fórmula:

[tex]I = \frac{1}{12}\cdot m\cdot L^{2}[/tex] (2)

Donde:

Al aplicar (2) en (1), tenemos la expresión resultante:

[tex]L = \frac{1}{12} \cdot m\cdot L^{2}\cdot \omega[/tex] (3)

Si sabemos que [tex]m = 6\,kg[/tex], [tex]L = 1.5\,m[/tex] y [tex]\omega = 16\,\frac{rad}{s}[/tex], entonces la cantidad de movimiento angular es:

[tex]L = \frac{1}{12}\cdot (6\,kg)\cdot (1.5\,m)^{2}\cdot \left(16\,\frac{rad}{s} \right)[/tex]

[tex]L = 18\,\frac{kg\cdot m^{2}}{s}[/tex]

La cantidad de movimiento angular de la varilla uniforme es 18 kilogramos-metro cuadrado por segundo.

Invitamos cordialmente a ver este problema sobre cantidad de movimiento: https://brainly.com/question/17711894

Answer:

A. Cue, White Ball, Blue Ball

Explanation:

Visualize in which order things are being hit

Answer: A car initially traveling at 60 km/h accelerates at a constant rate of 2.0 m/s2. A spaceship far from any star or planet accelerates uniformly from 72 m/s to 160 m/s .

Explanation: i hoped that helped you.

Answer:

this is the answer according to my calculations

Explanation:

0.001.9