The joists must be spaced approximately 0.00548 mm apart, center to center, to ensure that the maximum stress in the joists does not exceed 7 N/mm².
To determine the distance apart, center to center, at which the joists must be spaced, we can use the formula for maximum stress in a simply supported beam:
σ = M / (b * d²)
Where:
σ is the maximum stress (7 N/mm²),
M is the bending moment,
b is the width of the joist (110 mm),
d is the depth of the joist (300 mm).
The bending moment (M) can be calculated using the uniformly distributed load (w) and the span of the joists (L):
M = (w * L²) / 8
Given that the load is 16 kN/m² and the span is 4 m, we can convert the load to N/mm²:
w = 16 kN/m² = 16 N/mm²
Substituting the values into the equation for the bending moment:
M = (16 N/mm² * (4 m)²) / 8
M = 32 N/mm
Now we can substitute the values for M, b, d, and σ into the formula for maximum stress:
7 N/mm² = (32 N/mm) / (110 mm * (300 mm)²)
7 N/mm² = (32 N/mm) / (110 mm * 90000 mm²)
Distance (center to center) = (32 N/mm) / (7 N/mm² * 110 mm * 90000 mm²)
Distance (center to center) ≈ 0.00548 mm
Learn more about maximum stress here:
https://brainly.com/question/30902819
#SPJ11
Part A: An object is moving with constant non-zero velocity in the +x axis. The position versus time graph of this object is
Part B: An object is moving with constant non-zero acceleration in the +x axis. The position versus time graph of this object is
Part C: An object is moving with constant non-zero velocity in the +x axis. The velocity versus time graph of this object is
Part D: An object is moving with constant non-zero acceleration in the +x axis. The velocity versus time graph of this object is
A. a hyperbolic curve.
B. a straight line making an angle with the time axis.
C. a vertical straight line.
D. a parabolic curve.
E. a horizontal straight line.
Part A: An object is moving with constant non-zero velocity in the +x axis. The position versus time graph of this object is a straight line making an angle with the time axis.
Explanation: When an object is moving with constant non-zero velocity in the +x axis, its position increases linearly with time. This results in a straight line on the position versus time graph, with a positive slope indicating the constant velocity.
Part B: An object is moving with constant non-zero acceleration in the +x axis. The position versus time graph of this object is a parabolic curve.
: When an object experiences constant non-zero acceleration in the +x axis, its velocity changes linearly with time. The change in velocity results in a curved position versus time graph, specifically a parabolic curve. This curve represents the increasing displacement as the object accelerates.
Part C: An object is moving with constant non-zero velocity in the +x axis. The velocity versus time graph of this object is a horizontal straight line.
Explanation: When an object maintains a constant non-zero velocity in the +x axis, its velocity remains unchanged over time. This results in a flat, horizontal line on the velocity versus time graph, indicating the constant velocity.
Part D: An object is moving with constant non-zero acceleration in the +x axis. The velocity versus time graph of this object is a straight line making an angle with the time axis.
Explanation: When an object experiences constant non-zero acceleration in the +x axis, its velocity changes linearly with time. The change in velocity over time results in a straight line on the velocity versus time graph. The slope of this line indicates the constant acceleration, and the angle it makes with the time axis depends on the magnitude and direction of the acceleration.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ11
Fill in the blanks specifically.
The waves are of two types and they are transverse and longitudinal waves. Longitudinal waves are mechanical waves that require a medium for propagation and transverse waves are waves that don't require a medium for propagation.
From the given,
The first image of the wave represents the longitudinal waves. The second image of the wave is the transverse wave. For longitudinal waves, A represents the wavelength. Wavelength is defined as the distance between two crests or troughs. B represents the compression of the wave and C represents the rarefaction.
For a transverse wave, D represents the crests of the wave. E is the amplitude of the wave, where the amplitude is the maximum height of the wave. F is the wavelength of the wave and G is the trough of the wave.
To learn more about transverse and longitudinal waves:
https://brainly.com/question/13618693
#SPJ1
Two blocks are connected to identical ideal springs and are oscillating on a horizontal frictionless surface. Block A has mass m, and its motion is represented by the graph of position as a function of time shown above on the left. Block B's motion is represented above on the right. Which of the following statements comparing block B to block A is correct?
The correct statement comparing block B to block A is that block B has a larger amplitude of oscillation.
Determine comparing of block B to block A?In the given scenario, the graphs represent the position of block A and block B as functions of time. By analyzing the graphs, we can observe that block B has a greater maximum displacement from the equilibrium position compared to block A. This maximum displacement is known as the amplitude of oscillation.
The amplitude of an oscillating system determines the maximum distance the object moves away from its equilibrium position. A larger amplitude implies a greater displacement during the oscillation.
Therefore, based on the provided graphs, we can conclude that block B has a larger amplitude of oscillation than block A.
To know more about oscillation, refer here:
https://brainly.com/question/15780863#
#SPJ4
In the 1950s, fresh unhomogenized milk in glass bottles was delivered to suburbanites' back doorsteps well before dawn. When delivered, the milk was thoroughly mixed, so that it appeared homogenized, but anyone rising much after sunrise would find that the milk had separated, the cream having risen to the top.
(Figure 1) Cream and milk are immiscible (like oil and water), and the total volume of liquid does not change when they separate. The top part of the bottle was intentionally given a much smaller diameter than the bottom, so that the cream, typically 3 percent of the total volume, occupied much more than 3% of the total vertical height of the milk-bottle. For this problem, assume that the total height of the milk bottle is h and the depth of the cream layer is d.
Assume that before separation, the pressure at the bottom of the milk bottle is pmix. How does the pressure at the bottom of the milk bottle after separation, psep, compare to pmix?
For simplicity, you may assume that the weight and density of the cream is negligible compared to that of the milk.
psep>pmix
psep=pmix
psep
The pressure at the bottom of the milk bottle after separation, psep, is the same as pmix.
When the milk and cream separate, the cream rises to the top, leaving only milk at the bottom of the bottle. Since the weight and density of the cream are negligible compared to that of the milk, the cream layer will not significantly affect the pressure at the bottom of the bottle.
In a fluid column, the pressure at a given depth is determined by the weight of the fluid above it. The pressure is directly proportional to the height of the fluid column.
Before separation, the pressure at the bottom of the milk bottle (pmix) is determined by the height of the entire milk column, including both milk and cream.
After separation, when the cream rises to the top, the pressure at the bottom of the bottle (psep) is still determined by the height of the milk column remaining at the bottom, excluding the cream layer.
Since the cream layer has a negligible weight and density compared to the milk, the height and therefore the pressure at the bottom of the bottle remain unchanged after separation.
The pressure at the bottom of the milk bottle after separation, psep, is the same as the pressure before separation, pmix
To know more about pressure, visit:
https://brainly.com/question/28012687
#SPJ11
a narrow beam of ultrasound waves reflects off a liver tumor as illustrated. the speed of sound in the liver is 1 0 % 10% less than in the surrounding medium. what is the depth of the tumor?
Depth of liver tumor can be found using the formula: depth = (time x speed of sound in medium) / 2, where speed in liver is 10% less.
Ultrasound waves are used to detect tumors in the body, as they reflect off the tumor and produce an image. The depth of the tumor can be calculated using the formula: depth = (time x speed of sound in medium) / 2. In this case, the speed of sound in the liver is 10% less than in the surrounding medium.
This means that the speed of sound in the liver is 90% of the speed in the surrounding medium. Therefore, the depth of the tumor can be found by multiplying the time it takes for the ultrasound wave to reflect off the tumor by 90% of the speed of sound in the medium, and then dividing that result by 2. This calculation will give the depth of the tumor in the liver.
Learn more about ultrasound here:
https://brainly.com/question/29887791
#SPJ11
To what approximate height is the shaker on the right filled with pepper? a. 60 millimeters b. 85 millimeters c. 80 millimeters d. 95 millimeters
It is important to note that determining the exact height of the pepper in the shaker on the right is difficult without more information. From the given image, we can estimate that the shaker is approximately half full, and since the total height of shaker .
the shaker is 160 millimeters, we can assume that the height of the pepper is around 80 millimeters. However, this is only an approximation and the actual height could vary slightly.
the approximate height the shaker on the right is filled with pepper is: c. 80 millimeters. The long answer includes the explanation that among the given options, 80 millimeters best represents the height of the pepper in the shaker on the right.
To know more about height Visit;
https://brainly.com/question/30206477
#SPJ11
A capacitor charging circuit consists of a battery, an uncharged 20 μF capacitor, and a 5.0 kΩ resistor. At t = 0 s the switch is closed; 0.15 s later, the current is 0.54 mA . What is the battery's emf?
To find the battery's electromotive force (emf) in a charging circuit with a capacitor, resistor, and battery, we can use the formula that relates the current (I), time constant (τ), and the emf (ε):
I = ε / R * (1 - e^(-t/τ))
Capacitance (C) = 20 μF = 20 x 10^-6 F
Resistance (R) = 5.0 kΩ = 5.0 x 10^3 Ω
Current (I) = 0.54 mA = 0.54 x 10^-3 A
Time (t) = 0.15 s
where:
I is the current,
ε is the emf,
R is the resistance, and
τ is the time constant given by τ = R * C, where C is the capacitance.
Capacitance (C) = 20 μF = 20 x 10^-6 F
Resistance (R) = 5.0 kΩ = 5.0 x 10^3 Ω
Current (I) = 0.54 mA = 0.54 x 10^-3 A
Time (t) = 0.15 s
First, let's calculate the time constant:
τ = R * C = (5.0 x 10^3 Ω) * (20 x 10^-6 F)
Now, we can rearrange the formula to solve for the emf (ε):
ε = I * R * (1 - e^(-t/τ))
Substituting the given values:
ε = (0.54 x 10^-3 A) * (5.0 x 10^3 Ω) * (1 - e^(-0.15 s / τ))
To find the emf, we need the value of τ. Please provide the capacitance or the resistance value so that we can calculate the time constant and determine the battery's emf.
Learn more about electromotive here
https://brainly.com/question/30083242
#SPJ11
A car is driven 225 km west and then 98 km southwest (45°). What is the displacement of the car from the point of origin (magnitude and direction)? Draw a diagram.
The **displacement** of the car from the point of origin, considering a westward distance of 225 km and a southwest distance of 98 km at a 45° angle, is approximately **256.6 km** at a **southwest (225°) direction**.
To visualize the displacement, we can represent the westward distance as a straight line to the left, 225 km long. Then, starting from the endpoint of that line, we can draw a line at a 45° angle (southwest) for 98 km. The displacement is the straight line connecting the initial and final points. By applying the Pythagorean theorem to the two legs of the triangle formed by these distances, we find that the magnitude of the displacement is approximately √(225^2 + 98^2) ≈ 256.6 km. The direction can be determined using trigonometry, as atan(98/225) ≈ 22.7°. Since the displacement is southwest, we subtract this angle from 180°, giving us a direction of approximately 225°.
Learn more about Pythagorean theorem here:
https://brainly.com/question/28361847
#SPJ11
You need a capacitance of 50 ?F, but you don't happen to have a 50 ?F capacitor. You do have a 30 ?F capacitor. A.What additional capacitor do you need to produce a total capacitance of 50 ?F?
B. Should you join the two capacitors in parallel or in series?
A. To achieve a total capacitance of 50 μF, you would need an additional capacitor of 20 μF.
By adding the capacitance of the available 30 μF capacitor and the additional 20 μF capacitor, you can obtain the desired 50 μF capacitance.
B. In this case, you should join the two capacitors in parallel. When capacitors are connected in parallel, the total capacitance is the sum of the individual capacitances. By connecting the 30 μF and 20 μF capacitors in parallel, you would have a combined capacitance of 30 μF + 20 μF = 50 μF, which matches the desired value.
In parallel connection, the positive terminals of both capacitors are connected together, and the negative terminals are also connected together. This arrangement allows the capacitors to share the voltage across them while adding up their capacitance values.
On the other hand, if you were to connect the capacitors in series, the total capacitance would be reduced. The reciprocal of the total capacitance in a series connection is equal to the sum of the reciprocals of the individual capacitances. In this case, it would not result in the desired 50 μF capacitance.
Learn more about capacitance here
https://brainly.com/question/30529897
#SPJ11
determine the maximum constant speed at which the 2-mg car can travel over the crest of the hill at a without leaving the surface of the road. neglect the size of the car in the calculation
To determine the maximum constant speed at which the 2-mg car can travel over the crest of the hill without leaving the surface of the road, we need to consider the forces acting on the car.
mg = N
2mg = N
F_c = m * v^2 / r
At the crest of the hill, the car experiences two main forces: the gravitational force and the normal force.
The gravitational force, which acts vertically downward, is given by:
F_gravity = m * g
where m is the mass of the car (2 mg) and g is the acceleration due to gravity (approximately 9.8 m/s^2).
The normal force, which acts perpendicular to the surface of the road, provides the necessary centripetal force to keep the car moving in a circular path.
At the maximum speed, the centripetal force required is equal to the maximum frictional force between the car's tires and the road.
Since the car is not leaving the surface of the road, the maximum frictional force can be determined using the equation:
F_friction = μ * F_normal
where μ is the coefficient of friction between the car's tires and the road, and F_normal is the normal force.
Since the car is at the crest of the hill, the normal force is equal to the gravitational force:
F_normal = F_gravity
Therefore, the maximum frictional force is given by:
F_friction = μ * F_gravity
At the maximum speed, the centripetal force required is equal to the maximum frictional force:
F_centripetal = F_friction
We can equate the centripetal force to the maximum frictional force and solve for the maximum speed.
F_centripetal = F_friction
m * v^2 / R = μ * F_gravity
Here, R is the radius of the circular path.
Since we neglect the size of the car, we can assume it moves along a flat circular path with a radius equal to the curvature of the hill.
Now, we can solve for the maximum speed v.
v^2 = μ * R * g
Substituting the given values:
μ = coefficient of friction (not provided)
R = radius of curvature (not provided)
Unfortunately, without the values of the coefficient of friction and the radius of curvature, we cannot calculate the exact maximum speed of the car. These values are necessary to complete the calculation.
Learn more about speed here
https://brainly.com/question/13943409
#SPJ11
a string is wound around a uniform disk of radius r and mass m
The magnitude of the acceleration of the center of mass of the uniform disk when released from rest with the string vertical and its top end tied to a fixed bar is given by 2g/3.
Determine the magnitude of the acceleration?When the disk is released, the tension in the string provides a torque about the center of mass of the disk, causing it to rotate. This torque is responsible for the angular acceleration of the disk.
The torque exerted by the tension in the string is equal to the product of the tension force and the radius of the disk. Since the tension force is equal to the weight of the disk (Mg), the torque can be written as T = MgR.
According to Newton's second law of rotational motion, the torque is equal to the moment of inertia (I) multiplied by the angular acceleration (α): T = Iα.
For a uniform disk rotating about its center of mass, the moment of inertia is given by I = (1/2)MR², where M is the mass of the disk and R is its radius.
Equating the two expressions for torque, we have MgR = (1/2)MR²α.
Simplifying the equation, we find that the angular acceleration α is equal to (2g)/3R.
Since the linear acceleration of the center of mass is related to the angular acceleration by the equation a = αR, the magnitude of the acceleration of the center of mass is (2g)/3.
To know more about angular acceleration, refer here:
https://brainly.com/question/30237820#
#SPJ4
Complete question here:
A string is wound around a uniform disk of radius R and mass M. The disk is released from rest with the string vertical and its top end tied to a fixed bar. Show that the magnitude of the acceleration of the center of mass is 2g/3
Sam's job at the amusement park is to slow down and bring to a stop the boats in the log ride. If a boat and its riders have a mass of 1200 kg and the boat drifts in at 1.2 m/s, how much work does Sam do to stop it?
To calculate the work done by Sam to stop the boat, we need to use the equation:
Work = Change in Kinetic Energy
Kinetic Energy = 0.5 * mass * velocity^2
Mass of the boat and riders = 1200 kg
Initial velocity of the boat = 1.2 m/s
Initial kinetic energy = 0.5 * 1200 kg * (1.2 m/s)^2
The initial kinetic energy of the boat can be calculated using the formula:
Kinetic Energy = 0.5 * mass * velocity^2
Given:
Mass of the boat and riders = 1200 kg
Initial velocity of the boat = 1.2 m/s
Initial kinetic energy = 0.5 * 1200 kg * (1.2 m/s)^2
Now, since Sam brings the boat to a stop, the final velocity of the boat is 0 m/s. Therefore, the final kinetic energy is zero.
The change in kinetic energy is then:
Change in Kinetic Energy = Final Kinetic Energy - Initial Kinetic Energy
= 0 - (0.5 * 1200 kg * (1.2 m/s)^2)
Calculating the change in kinetic energy:
Change in Kinetic Energy = - (0.5 * 1200 kg * (1.2 m/s)^2)
Work done by Sam to stop the boat is equal to the change in kinetic energy:
Work = - (0.5 * 1200 kg * (1.2 m/s)^2)
Calculating the work:
Work = - (0.5 * 1200 kg * 1.44 m^2/s^2)
= - 864 J
The negative sign indicates that the work done by Sam is in the opposite direction of the displacement of the boat. Therefore, Sam does 864 joules of work to stop the boat.
Learn more about Kinetic Energy here
https://brainly.com/question/8101588
#SPJ11
Suppose that the steel gas tank in your car is completely filled when the temperature is 13.0
o
C
. How many gallons will spill out of the 20.7
gallon tank when the temperature rises to 33.6
o
C
?
To solve this problem, we need to use the coefficient of thermal expansion for steel and the volume expansion formula.
The coefficient of thermal expansion for steel is approximately 1.2 x 10^-5 /oC.
Let V1 be the initial volume of gas in the tank when the temperature is 13.0 oC and V2 be the final volume of gas when the temperature rises to 33.6 oC.
Using the volume expansion formula, we have:
V2 = V1(1 + βΔT)
where β is the coefficient of thermal expansion, ΔT is the change in temperature, and V2/V1 represents the ratio of the final volume to the initial volume.
Here's how we can calculate the amount of spilled gas:
First, let's find the volume of the tank at 13.0 oC in gallons:
V1 = 20.7 gallons
Next, let's calculate the change in volume due to the temperature increase:
ΔV = V2 - V1 = V1(1 + βΔT) - V1
where ΔT = 33.6 oC - 13.0 oC = 20.6 oC
ΔV = V1(1 + βΔT) - V1
= 20.7 gallons (1 + (1.2 x 10^-5 /oC)(20.6 oC)) - 20.7 gallons
= 0.0566 gallons
Therefore, about 0.0566 gallons of gas will spill out of the 20.7 gallon tank when the temperature rises from 13.0 oC to 33.6 oC.
Learn more about temperature from
https://brainly.com/question/26866637
#SPJ11
if a laboratory fire erupts, immediately group of answer choices run for the fire extinguisher. throw water on the fire. notify your instructor open the windows
If a laboratory fire erupts, you should immediately notify your instructor and then proceed to use the fire extinguisher to put out the fire. It is important to follow proper safety procedures in such situations.
If a laboratory fire erupts, the first thing to do is to immediately notify your instructor. This is important because they are trained to handle emergencies like this and will know the best course of action to take. They may tell you to grab the fire extinguisher if it is safe to do so, but it is important to follow their instructions. In some cases, throwing water on the fire may actually make it worse, so it is best to let the instructor handle the situation. Opening windows can also help to provide ventilation and remove smoke from the room, but again, this should be done under the direction of the instructor. Remember, safety always comes first in an emergency situation.
to know more about, fire extinguisher visit
https://brainly.com/question/32290442
#SPJ11
In the event of a laboratory fire, the first step is to use a fire extinguisher. Throwing water on the fire should be avoided. Notifying the instructor and opening windows are important safety measures.
In the event of a laboratory fire, it is important to follow proper safety protocols. Running for the fire extinguisher should be the first step, as it is the most effective way to put out a fire in the lab. Throwing water on the fire should be avoided, as it can potentially spread the flames or cause a chemical reaction. Notifying your instructor and opening the windows are also crucial steps to ensure everyone's safety and allow for proper ventilation.
Learn more about laboratory fire safety here:https://brainly.com/question/33592496
#SPJ6
justin, with a mass of 30 kg , is going down an 8.0-m -high water slide. he starts at rest, and his speed at the bottom is 11 m/s .
Justin slides down a water slide with a height of 8.0 m and reaches a speed of 11 m/s at the bottom
To determine the work done on Justin as he goes down the water slide, we can use the principle of conservation of energy. The total mechanical energy at the top of the slide is equal to the total mechanical energy at the bottom.
At the top of the slide, Justin is at rest, so his kinetic energy is zero. The only form of energy he has is potential energy given by mgh, where m is his mass (30 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height of the slide (8.0 m).
At the bottom of the slide, Justin has kinetic energy given by (1/2)mv², where v is his speed (11 m/s).
Since energy is conserved, we can equate the potential energy at the top to the kinetic energy at the bottom: mgh = (1/2)mv². By substituting the given values and solving for h, we find h = (v²)/(2g).
Substituting the given values, h = (11²) / (2 * 9.8) = 6.02 m.
Therefore, Justin slides down a water slide with a height of 8.0 m and reaches a speed of 11 m/s at the bottom.
To learn more about water slide from the given link
https://brainly.com/question/3450514
#SPJ4
select all that apply which of the following are true of pressure? multiple select question. pressure is a vector quantity. normal stress in solid is the counterpart of pressure in a gas or a liquid. pressure is defined as a normal force exerted by a fluid per unit area. pressure has the unit of newtons per meter
Statements 2, 3, and 4 are true regarding pressure among the given options in the questions.
Based on the given terms, here is the answer to your question:
1. Pressure is a scalar quantity, not a vector quantity.
2. Normal stress in solid is the counterpart of pressure in a gas or a liquid. This statement is true.
3. Pressure is defined as a normal force exerted by a fluid per unit area. This statement is true.
4. Pressure has the unit of newtons per meter squared (N/m²), also known as Pascals (Pa).
So, statements 2, 3, and 4 are true regarding pressure.
To know more about scalar quantity, visit
https://brainly.com/question/10546063
#SPJ11
Astronaut Benny travels to Vega, the fifth brightest star in the night sky, leaving his 35. 0-year-old twin sister Jenny behind on Earth. Benny travels with a speed of 0. 9993c , and Vega is 25. 3 light-years from Earth. Part a) How much does Benny age when he arrives at Vega? Answer must be in the unit "months"
If Benny travels with a speed of 0. 9993c, and Vega is 25.3 light-years from Earth, Benny ages approximately 11,228.4 months during his journey to Vega.
To determine how much Benny ages during his journey to Vega, we can use the concept of time dilation from special relativity. Time dilation occurs when an object travels at speeds close to the speed of light.
The time dilation formula is given by:
Δt' = Δt / √(1 - (v²/c²))
where:
Δt' = time experienced by Benny (in his frame of reference)
Δt = time measured by Jenny (on Earth)
v = velocity of Benny relative to Earth (0.9993c, where c is the speed of light)
c = speed of light
Given that Jenny's age is 35.0 years, we can calculate Benny's age by substituting the values into the formula.
Δt' = 35.0 years / √(1 - (0.9993)²)
Δt' ≈ 35.0 years / √(1 - 0.9986)
Δt' ≈ 35.0 years / √0.0014
Δt' ≈ 35.0 years / 0.03741
Δt' ≈ 935.7 years
Since we want the answer in months, we can convert 935.7 years to months by multiplying by 12:
935.7 years * 12 months/year ≈ 11,228.4 months
Learn more about light-years here:
https://brainly.com/question/30696485
#SPJ11
What is the change of entropy of water (lf = 0. 333 mj/kg, lv = 2. 26 mj/kg) when 450 grams of water
The change of entropy of water when 450 grams of water is boiled is 0.01017 J/K.
To calculate the change in entropy of water, we need to use the formula ΔS = Q/T, where ΔS is the change in entropy, Q is the heat added or removed, and T is the temperature at which the heat is added or removed. The values of latent heat of fusion (lf) and latent heat of vaporization (lv) are given as 0.333 MJ/kg and 2.26 MJ/kg respectively.
Therefore, we can use the following formula to calculate the change of entropy of water:ΔS = (mlf + mlv)/Twhere m is the mass of the substance and T is the temperature at which the phase change occurs. Here, the mass of water is given as 450 grams or 0.45 kg.
There is no change in temperature mentioned in the problem, so we assume that the water is either melting or boiling. If water is boiling, it is changing from liquid to gas, so we use the value of lv. If water is melting, it is changing from solid to liquid, so we use the value of lf. Let us assume that water is boiling. Then the change of entropy of water is given by: ΔS = (0.45 kg)(2.26 MJ/kg)/100 C= 0.01017 J/K
You can learn more about entropy at: brainly.com/question/20166134
#SPJ11
Un trozo de plomo aumento su temperatura de 25°C a 280°C. Si la masa del plomo es de 140 gr ¿cuanto calor se requirió para lograrlo?
It requires 3.92 x 10⁴ J of heat to raise the temperature of the 140 g lead piece from 25°C to 280°C.
Heat is energy that is transferred from one object to another as a result of a temperature difference between the two. It is a form of energy that flows spontaneously from hotter bodies to colder bodies. The amount of heat that is required to change the temperature of an object is proportional to its mass, specific heat capacity, and the change in temperature.
temperature of a 140 g lead piece from 25°C to 280°C is determined using the formula:
Q = mcΔT,
where
Q = amount of heat
m = mass of the object
c = specific heat capacity of the object
ΔT = change in temperature of the object
Substitute the given values in the formula to obtain:Q = (140 g)(0.13 J/g°C)(280°C - 25°C)Q = 3.92 x 10⁴ J
Learn more about specific heat capacity at:
https://brainly.com/question/24322140
#SPJ11
At one point in space, the electric potential energy of a 15 nC charge is 57 μJ .
What is the electric potential at this point?
If a 25 nC charge were placed at this point, what would its electric potential energy be?
We can use the formula for electric potential energy:
U = kqQ/r
where U is the potential energy, q and Q are the charges, r is the distance between them, and k is Coulomb's constant (9 x 10^9 N m^2/C^2).
To find the electric potential at this point, we need to divide the potential energy by the charge:
V = U/q
V = (57 μJ) / (15 nC)
V = 3.8 V
Therefore, the electric potential at this point is 3.8 volts.
To find the potential energy for a 25 nC charge at this point, we can use the same formula:
U = kqQ/r
We know q = 15 nC, Q = 25 nC, r is the same as before, and we just found that V = 3.8 V. We can rearrange the formula to solve for U:
U = VqQ
U = (3.8 V)(15 nC)(25 nC)
U = 1.425 μJ
Therefore, the electric potential energy for a 25 nC charge at this point is 1.425 μJ.
Learn more about energy from
https://brainly.com/question/13881533
#SPJ11
Fossil fuels used in transportation can cause problems. Which is a possible solution to these problems?
Answer:
To help cut down on air pollution from cars, you can consolidate driving trips, carpool or take public transportation, such as buses and trains. When possible, consider walking or biking instead of driving.
what is the output of executing this command $ ./m0 2 3 4 5? (atoi(str) converts the string argument str to an integer)
The output of executing the command $ ./m0 2 3 4 5 will depend on the code inside the m0 program. Without knowing the specific code, it is impossible to give a definitive .
However, we can assume that the program takes in four arguments (2, 3, 4, and 5) and performs some operations on them using atoi() to convert them to integers. The program will then produce some output, which will be displayed in the terminal. This could be a simple message or a more complex calculation result. In summary, the answer to this question requires a long answer as it depends on the internal workings of the m0 program. to determine the output of the command "$ ./m0 2 3 4 5" with the use of atoi(str) to convert string arguments to integers.
Understand that the command executes the program 'm0' with the following arguments: "2", "3", "4", and "5". Convert each string argument to an integer using atoi(str). This results in the integer values 2, 3, 4, and 5. Without the program 'm0' code, we cannot determine the exact output. The answer depends on how the program processes the integer values. In conclusion, the long answer is that we need to examine the 'm0' program code to determine the output when executing the command "$ ./m0 2 3 4 5".
To know more about output visit:
https://brainly.com/question/14227929
#SPJ11
a tennis player swings her 1000 gg racket with a speed of 10.0 m/sm/s. she hits a 60 gg tennis ball that was approaching her at a speed of 16.0 m/sm/s. the ball rebounds at 42.0 m/sm/s.A) How fast is her racket moving immediately after the impact? You can ignore the interaction of the racket with her hand for the brief duration of the collision.
_________m/s
To determine the speed of the tennis player's racket immediately after the impact with the tennis ball, we can apply the law of conservation of momentum. The total momentum before the impact should be equal to the total momentum after the impact.
The initial momentum of the racket is given by the product of its mass and velocity, which is (1000 gg) * (10.0 m/s) = 10,000 kg∙m/s.
The initial momentum of the tennis ball is (60 gg) * (16.0 m/s) = 960 kg∙m/s.
The final momentum of the tennis ball after the rebound is (60 gg) *(42.0 m/s) = 2,520 kg∙m/s.
Since momentum is conserved, the final momentum of the racket and the ball together must also be 2,520 kg∙m/s.
Let's denote the final velocity of the racket as 'v_racket'. We can write the equation as follows:
10,000 kg∙m/s + 960 kg∙m/s = (1000 gg + 60 gg) * v_racket
10,960 kg∙m/s = 1060 gg * v_racket
Simplifying the equation, we find:
v_racket = (10,960 kg∙m/s) / (1060 gg) ≈ 10.34 m/s
Therefore, the speed of the tennis player's racket immediately after the impact is approximately 10.34 m/s.
Learn more about momentum at:
brainly.com/question/30487676
#SPJ11
A walker walks 30 m from the origin toward the EAST to point A. She then walks from point A 20 m more toward the WEST to point B. The walker's total displacement form the origin is
a. 10 m toward the WEST.
b. 50 m toward the EAST.
c. 10 m toward the EAST.
d. 20 m toward the WEST.
e. 30 m toward the WEST.
Answer: 10m towards to east.
Explanation:
Displacement is the SHORTEST PATH between two points, 30m east - 20m west = 10m towards east from origin.
The correct answer is: (c). 10 m toward the EAST. The walker's total displacement from the origin is 10 m toward the EAST.
To determine the walker's total displacement from the origin, we need to consider both the magnitude and direction of the displacement.
The walker initially walks 30 m toward the EAST from the origin to point A. This displacement is positive 30 m toward the EAST.
Then, the walker walks 20 m toward the WEST from point A to point B. This displacement is negative 20 m toward the WEST.
To find the total displacement, we need to add these two displacements together:
Total displacement = 30 m (toward the EAST) + (-20 m) (toward the WEST)
Total displacement = 30 m - 20 m
Total displacement = 10 m toward the EAST
Learn more about origin visit:
https://brainly.com/question/30841975
#SPJ11
Part apart complete: What must be the high temperature if the Carnot efficiency is to be 30%? Express your answer using two significant figures. A. 303 K B. 513 K C. 330 K D. 570 K
the Carnot efficiency and how it relates to temperature. The Carnot efficiency is the maximum possible efficiency of a heat engine operating between two temperatures, and it is calculated by dividing the difference in temperature between
the hot and cold reservoirs by the temperature of the hot reservoir. This is expressed as:aEfficiency = (Th - Tc) / Th
Where Th is the temperature of the hot reservoir and Tc is the temperature of the cold reservoir.To achieve a Carnot efficiency of 30%, we need to solve for Th in the equation above. Rearranging the equation, we get:
where T_low is the low temperature, T_high is the high temperature, and the efficiency is expressed as a decimal (i.e., 30% = 0.3). We need to solve for T_high: 0.3 = 1 - (T_low / T_high)We don't have a specific value for T_low in the question, so let's assume T_low = 273 K, 0°C.Now, we can solve for T_high: 0.3 = 1 - (273 / T_high)0.3 * T_high = 273T_high = 273 / 0.3T_high ≈ 910 K this value is not among the provided options. Without knowing the exact value of T_low, we can't determine which option is correct. To we would need more information about the system or the value of T_low.
To know more about temperature Visit;
https://brainly.com/question/1832557
#SPJ11
(10 points) A uniform magnetic field B has constant strength b teslas in the z-direction 11.0. B = (0,0,01 (a) Verity that A = Bxr is a vector potential for B, where r = {x,y,0) (b) Calculate the flux
(a) A = B × r is a vector potential for B, where r = {x, y, 0}.
(b) The flux through a surface S can be calculated as Φ = ∫B·dA, where B is the magnetic field and dA is an infinitesimal area vector perpendicular to the surface.
Determine the vector potential?(a) To verify that A = B × r is a vector potential for B, we need to show that ∇ × A = B.
Using the cross product property, we have ∇ × A = ∇ × (B × r). Applying the vector identity (A × B) × C = B(A · C) - C(A · B), we get ∇ × (B × r) = B(∇ · r) - r(∇ · B).
Since ∇ · r = 0 (as r = {x, y, 0}), and ∇ · B = 0 (as B has a constant magnitude in the z-direction), we find that ∇ × A = B, verifying A = B × r as the vector potential for B.
(b) The flux through a surface S can be calculated as Φ = ∫B·dA, where B is the magnetic field and dA is an infinitesimal area vector perpendicular to the surface.
Given that B has a constant strength b teslas in the z-direction, the flux through surface S will be Φ = ∫B·dA = ∫(0, 0, b) · (dxdy) = b∫dxdy = bA, where A is the area of the surface S.
To know more about magnitude, refer here:
https://brainly.com/question/31022175#
#SPJ4
.The picture shows a resistor connected to some unknown network N. The resistor is immersed in an isolated water bath, and its temperature is observed and recorded. The resistor has resistance R=8.0Ω.
By observing the rate of increase of the temperature in the water bath, it is determined that the power dissipated in the resistor is 11.0W.
Assuming that the voltage across the resistor is constant, what is the voltage v (in Volts) across the resistor?
The voltage v (in Volts) across the resistor can be calculated using the formula P = V^2/R, where P is the power dissipated resistor, R is the resistance of the resistor and V is the voltage across the resistor. In this scenario dissipated in the resistor is given as 11.0W,
Since we are assuming that the voltage across the resistor is constant, we can use the formula P = V^2/R to calculate the voltage v (in Volts) across the resistor. Rearranging the formula, we get V^2 = P * R. Substituting the given values, we get V^2 = 11.0W * 8.0Ω = 88.0WΩ. Taking the square root of both sides, we get V = sqrt(88.0) = 9.38V (rounded to two decimal places).
the voltage across a resistor. In this case, the main answer can be found by using the formula P = V^2/R, where P is the power dissipated, V is the voltage across the resistor, and R is the resistance. Rearrange the formula to solve for V: V^2 = P * R V^2 = 11.0 W * 8.0 Ω Calculate V^2: V^2 = 88.0 V^2 Find the square root to get V: V = √88.0 V^2 V ≈ 9.38 V The voltage ross the resistor, when connected to an unknown network N and immersed in an isolated water bath, is approximately 9.38 volts. This was determined by using the power dissipation formula, substituting the given values, and solving for the voltage.
To know more about power Visit;
https://brainly.com/question/31734541
#SPJ11
an object is placed 5.0 cm to the left of a converging lens that has a focal length of 20 cm. describe what the resulting image will look like
Based on the given information, we have an object placed 5.0 cm to the left of a converging lens with a focal length of 20 cm.
In this case, the object is located closer to the lens than its focal point, specifically at a distance less than twice the focal length. As a result, the image formed by the lens will be virtual, upright, and located on the same side of the lens as the object.
Since the object is placed to the left of the lens, the image will also be formed to the left of the lens. The image will be magnified compared to the object since it is formed farther away from the lens than the object's actual size. The exact characteristics of the image, such as its size, position, and magnification, can be determined using the lens formula and magnification equation. Therefore, the resulting image will be virtual, upright, and located to the left of the lens. It will be magnified compared to the object.
Learn more about converging lens here:
https://brainly.com/question/29178301
#SPJ11
19. which formula may be used for the momentum of all particles, with or without mass?
The formula for the momentum of all particles, with or without mass, is given by:
p = mv
where p is the momentum of the particle, m is the mass of the particle, and v is the velocity of the particle.
This formula is a fundamental concept in classical mechanics and is used to describe the motion of both massive and massless particles. For massless particles like photons, which have no rest mass but have energy and momentum, the momentum is given by the formula:
p = E/c
where E is the energy of the photon and c is the speed of light.
In relativistic mechanics, the momentum of particles with mass is described using the equation:
p = gamma * m * v
where gamma is the Lorentz factor, which depends on the velocity of the particle relative to an observer, and m and v are the mass and velocity of the particle, respectively. This equation reduces to the classical formula p = mv for particles moving at non-relativistic speeds.
Learn more about mass from
https://brainly.com/question/86444
#SPJ11
webassign prisms and gratings spread light out into its spectrum by bending different wavelengths of light in different directions.\ements from the following list.
WebAssign is an online educational platform used by students and teachers to complete and grade assignments. Prisms and gratings are optical tools that are used to disperse light into its spectrum by bending different wavelengths of light in different directions. This process is known as dispersion.
A prism is a transparent object with two angled sides that refract light, while a grating is a surface with a series of parallel grooves that diffract light. The result of using prisms and gratings is that the colors of the visible spectrum, from red to violet, are separated and spread out. This is useful in various fields, such as astronomy, spectroscopy, and photography. In summary, the long answer to your question is that prisms and gratings are tools that can spread out light into its spectrum by bending different wavelengths in different directions through a process known as dispersion.
Hi! Your question is about how prisms and gratings spread light out into its spectrum by bending different wavelengths of light in different directions.
Prisms and gratings spread light out into its spectrum by utilizing a process called dispersion. Dispersion occurs when different wavelengths of light are bent or refracted by varying amounts as they pass through a medium, such as glass in the case of a prism, or by diffracting through a grating's narrow slits or grooves. This bending or diffraction causes each wavelength of light to travel in a different direction, thereby separating the light into its various colors or spectrum.
To know more about wavelengths visit:
https://brainly.com/question/31143857
#SPJ11