Answers
First, consider that the distance traveled by the car in 0.75s is:
[tex]x=v\cdot t[/tex]Convert 90km/h to m/s as follow:
[tex]\frac{90\operatorname{km}}{h}\cdot\frac{1h}{3600}\cdot\frac{1000m}{1\operatorname{km}}=\frac{25m}{s}[/tex]Then, the distance x is:
[tex]x=(\frac{25m}{s})(0.75s)=18.75m[/tex]Then, when the driver start to apply the brakes, the distance to the barrier is:
x' = 40.0 m - 18.75 m = 21.25 m
Next, calculate the distance that the car need to stop completely, by using the following formula:
[tex]v^2=v^2_o-2ad[/tex]where,
v: final velocity = 0m/s (the car stops)
vo: initial velocity = 25m/s
a: acceleration = 10m/s^2
d: distance = ?
Solve the previous equation for d and replace the values of the other parameters:
[tex]d=\frac{v^2_0-v^2}{2a}=\frac{(\frac{25m}{s})^2-(\frac{0m}{s})^2}{2(\frac{10m}{s})^{}}=31.25m[/tex]Then, the drive needs 31.25 m to stop. If you compare the previous result with the distance of the car related to the barrier when the driver applies the brakes
(x' = 18.75 m), you can notice that d is greater than x'.
Hence, the car does hit the barrier.
Related Questions
Two blocks of mass M₁ and M₂ are connected by a massless
string that passes over a massless pulley as shown in the
figure. M₁ has a mass of 3.75 kg and rests on an incline of
0₁ = 63.5°. M2 rests on an incline of 0₂ = 15.5°. Find the
mass of block M₂ so that the system is in equilibrium (i.e.,
not accelerating). All surfaces are frictionless
Answers
The correct answer is 58.58 Kg. (Mass of M_2)
What is mass string and friction system?
A spring-mass system in simple calculation can be described as a spring system where a block is hung or attached at the free end of the spring. If the surface is frictionless so µ = 0 (we can assume)
To just begin to slide up the friction will be kinetic friction
Applying free body diagram on blocks (as diagram is not given in question so assumption is the basis on given data only)
Given, M_1 = 3.75 Kg., M_2 =?
O_1 = 63.5◦ and O_2 = 15.5◦, g = 9.8 m/s2
So, if we require to keep the system in equilibrium position
Then we can write an equation as follows:
M_1x g x Sin63.5◦ = M_2 x g x Cos 15.5◦ (To be in Equilibrium)
63.5 x 9.8 x 0.89101 = M_2 x 9.8 x 0.9659
M_2 = 63.5 x 0.89101 / 0.9659
M_2 = 58.58 Kg. (Mass of M_2)
To learn more about mass , string and friction from the given link
https://brainly.com/question/13389663
#SPJ13
what energy is gotten from wind
Answers
Kinetic energy is gotten from wind which is converted into rotational energy.
How energy is produced from the wind?The wind is used to produce electricity using the kinetic energy created by air in motion wind turbines convert the kinetic energy in the wind into mechanical power. This mechanical ability can be used for particular tasks (such as grinding grain or forcing water) or can be converted into electricity by a generator. into electricity. In present wind turbines, wind rotates the rotor blades, which change kinetic energy into rotational energy. Wind turbines labor on an easy principle: in lieu of using electricity to make wind like a fan wind turbines use the wind to make electricity. The wind turns the rotter-like blades of a turbine around a rotor, which spins a generator, which produced electricity.
So we can conclude that Wind rotates the rotor blades that convert kinetic energy into rotational energy.
Learn more about it Wind here: https://brainly.com/question/158098
#SPJ1
An archery bow is drawn a distance d = 0.39 m and loaded with an arrow of mass m = 0.088 kg. The bow acts as a spring with a spring constant of k = 195 N/m, and the arrow flies with negligible air resistance. To simplify your work, let the gravitational potential energy be zero at the initial height of the arrow. If the arrow is shot at an angle of θ = 45° above the horizontal, how high, in meters above the initial height, will the arrow be when it reaches its peak?
Answers
The maximum height reached by the arrows is determined as 8.6 m.
What is the initial speed of the arrow?The initial velocity of the arrow is calculated by applying the principle of conservation of energy as shown below;
K.E = U
where;
K.E is the kinetic energy of the arrowU is the elastic potential energy of the bow¹/₂mv² = ¹/₂kx²
mv² = kx²
v² = kx²/m
v = √(kx²/m)
where;
k is spring constant of the bowm is the mass of the arrowx is the extension of the bowv = √(195 x 0.39²/0.088)
v = 18.36 m/s
The maximum height reached by the arrow is calculated as follows;
H = (v² sin²θ) / (2g)
where;
θ is angle of projection of the arrowg is acceleration due to gravityH = (18.36² (sin45)²) / (2 x 9.8)
H = 8.6 m
Thus, the height of the arrow above the ground when it reaches its peak is 8.6 m.
Learn more about maximum height here: https://brainly.com/question/12446886
#SPJ1
A steel cable on a bridge has a linear mass density of 15 kg/m. If the cable has been pulled taunt with a tension of 5536 N, what is the speed of a wave on it?
Answers
the spaceship is flying through space far from planets and stars with the engines firing.
The astronaut shuts the engines off.
The spaceship will….
a. stop moving immediately
b. slow down gradually and stop
c. continue with whatever speed it had when the engines were cut off
d. speed up for just a little while, then slow down
Answers
What is the initial velocity of an automobile acquiring a final velocity of 32 m/s with an acceleration of 4.0m/s ²
Answers
Answer:
Explanation:
Given:
V = 32 m/s
a = 4.0 m/s²
__________
V₀ - ?
V = V₀ + a*t
V₀ = V - a*t = 32 - 4*t
Time is not set according to the condition of the problem!
There's not enough given information t o answer the question. It depends on how long the car has been accelerating.
it could be 28 m/s 1 second ago.
it could be 16 m/s 4 seconds ago.
it could be 10 m/s 5.5 seconds ago.
etc.
i'll take a wild guess and speculate that the question actually tells how long the car has been accelerating, but you didn't copy that part.
Alnico is _____.an alloy of metals with strong magnetic propertiesa brittle mixture of substances containing ferromagnetic elementsany material containing ironan element found in nature that behaves like a magnet
Answers
Alnico is an alloy made of iron combined with other metals, aluminum, nickel, and cobalt.
The alnico is a permanent magnet
What is the electric field amplitude of an electromagnetic wave whose magnetic field amplitude is 7.9 mT ?
Answers
Given:
The amplitude of the magnetic field of the electromagnetic wave is,
[tex]B_0=7.9\text{ mT}[/tex]To find:
The amplitude of the electric field
Explanation:
Let, the amplitude of the electric field is
[tex]E_0[/tex]As we know,
[tex]\begin{gathered} \frac{E_0}{B_0}=c \\ c=3\times10^8\text{ m/s} \end{gathered}[/tex]Substituting the values we get,
[tex]\begin{gathered} \frac{E_0}{7.9\times10^{-3}}=3\times10^8 \\ E_0=3\times10^8\times7.9\times10^{-3} \\ E_0=2.37\times10^6\text{ N/C} \end{gathered}[/tex]Hence, the amplitude of the electric field is,
[tex]2.37\times10^6\text{ N/C}[/tex]If a hammer is dropped from a height of 52 m and there is no air resistance, what is the acceleration the hammer experiences while it is falling towards the ground?
Answers
The hammer is fallingtowards the ground under the action of only one force which is gravity.
Thus, the acceleration of the hammer while falling towards the ground is the acceleration due to gravity.
Hence, the acceleration of the hammer in the given case is,
[tex]g=9.81ms^{-2\text{ }}[/tex]Need help with this question Short straight forward answers please :)
Answers
We will have the following:
a. The gravitational potential energy will be:
[tex]P_C=(15kg)(9.8m/s^2)(6m)\Rightarrow P_C=882J[/tex]So, the gravitational potential energy of C is 882 J.
b. The velocity of C right before it hits the ground will be:
[tex]\begin{gathered} 882J=\frac{1}{2}(15kg)v^2\Rightarrow\frac{1764J}{15kg}=v^2 \\ \\ \Rightarrow v=\frac{14\sqrt{15}}{5}m/s\Rightarrow v\approx10.84m/s \end{gathered}[/tex]So, the velocity will be approximately 10.84 m/s.
c.
1. We will have that Eg at the initial position will be: B < C
2. Vfinal upon impact with ground: B = C
3. Ek right before hitting he ground: B < C
f.
1. Eg: A > B
2. V final: A > B
3. Ek: A > B
4. V at 2 meters above the ground: A > B
5. Total energy at 2 m above the ground: A > B.
Three people are driving their cars in different directions, in an open field. At one point, while they are all driving, they each measure the other drivers’ velocities. When they compare measurements afterward, they notice that they all got different measurements from each other. Why do their measurements not match?
Answers
Answer:
because of their change in momentum
How to do Projectile Motion?
Answers
A thrown ball undergoes projectile motion so throwing a ball in the air is an example of projectile motion.
What is Projectile Motion?Projectile motion is the motion of an object pitched (projected) into the air. After the starting force that launches the object, the only occurrence of the force of gravity in the object is called a projectile motion, and its path is called its trajectory. Projectile motion is a form of motion in which an object or particle ( called a projectile, is thrown near the earth's surface and moves along a curved path under the action of gravity only. Throwing a ball or a cannonball. The motion of a billiard ball on the billiard table. t. The motion of the earth around the un-projectile motion is a special case of two-dimensional motion. A particle in motion at a vertical level with an initial velocity and experiencing a free-fall (downward) acceleration, displays projectile motion.
So we can conclude that Projectile motion is applicable in both throwing and hitting. A thrown ball undergoes projectile motion.
Learn more about it Projectile Motion here: https://brainly.com/question/24216590
#SPJ1
An object is projected or flung into the air, and only gravity's acceleration affects the object's velocity. A projectile is what it is, and its trajectory is what it took to get there.
What is Projectile motion?An item or particle that is projected toward the surface of the Earth and moves along a curved path only under the influence of gravity is said to be experiencing projectile motion. Galileo demonstrated that this curving path was a parabola, however it can also be a straight line in the unique situation where it is hurled straight up.
Ballistics is the study of such motions, and this trajectory is a ballistic trajectory. Gravity, which works downward and gives the item a downward acceleration toward the Earth's center of mass, is the sole force of mathematical significance that is actively acting on it.
To get more information about Projectile motion :
https://brainly.com/question/11049671
#SPJ1
Can you please tell me the definition and give a example/formula of the first law of thermodynamics
Answers
We will have the following:
The first law of Thermodynamics:
Energy cannot be created or destroyed, it can only be transformed.
An example is when a car suddenly breaks in order to avoid hitting a person, here the velocity of the car, all the energy that is acumulated is transformed into thermal energy and it disipated by the friction of the breaks and the tires. The total energy of the system will remain the same, but it will change the way the energy is present. This as per our understanding of the universe so far.
It is not possible to derive an equation of motion for uniform acceleration without a time variable. Is this true or false?
Answers
The third equation of motion is given as,
[tex]v^2=u^2+2as[/tex]Here, v is the final velocity, u is the initial velocity, a is the acceleration and s is displacement.
The expression for the acceleration is given as,
[tex]a=\frac{v^2-u^2}{2s}[/tex]In the above expression, the acceleration of the body is not a function of the time variable. Therefore, it is possible to derive an equation of motion for uniform acceleration without a time variable. Hence, the given statement is false.
A pottery wheel with rotational inertia 40 kgm^2 rotates at 10 rev/s. 4 kg of clay is dropped onto the wheel 1.2 m from the axis. What angular speed will the wheel have after this?1. 55 rad/s2. 8.7 rad/s3. 70 rad/s4. 0 rad/s
Answers
Given:
• Rotational inertia = 40 kg.m²
,• Initial angula speed = 10 rev/s
,• Mass, m = 4 kg
,• Diameter, d = 1.2 m
Let's find the angular speed of the wheel.
To find the angular speed, apply the formula:
[tex]L_i=(I+md^2)*w_f[/tex]Where wf is the final angular speed
I is the rotational inertia
m is the mass
d = 1.2
Li is the angular momentum.
To find the angular momentum, we have:
[tex]\begin{gathered} L_i=40*10*2\pi \\ L_i=2513.27\text{ kg.m}^2\text{ rad/s} \end{gathered}[/tex]Now, to find the final angular speed, wf, plug in values in the first equation and solve for wf:
[tex]\begin{gathered} Li=(I+md^2)w_f \\ \\ 2513.27=(40+4*1.2^2)w_f \\ \\ 2513.27=45.76w_f \\ \\ w_f=\frac{2513.27}{45.76} \\ \\ w_f=54.9\approx55\text{ rad/s} \end{gathered}[/tex]Therefore, the final angular speed is 55 rad/s.
ANSWER:
1.) 55 rad/s
The image shows street lights powered by solar panels. Which sequence shows the energy transformations taking place in these lights?
Picture of three solar panels street light on a sunny day with blue background
A.
gravitational potential energy → vibrational energy → chemical potential energy
B.
radiant energy → chemical potential energy → motion energy
C.
radiant energy → electric energy → radiant energy
D.
sound energy → chemical potential energy → radiant energy
E.
gravitational potential energy → motion energy → radiant energy
Reset Next
Answers
The sequence that shows the energy transformations taking place in these lights are radiant energy → electric energy → radiant energy.
What is law of conservation of conservation of energy?
The principle or law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.
Based on this law, the energy of a substance can be converted from one form to another
For example, energy can be converted as follows;
potential energy to kinetic energychemical energy to electric energyelectrical energy to sound energyetc,The sequence of energy that takes place on street lights powered by solar panels is given as follows;
Radiant energy (light energy from sun) to electrical energy (converted by photo voltaic cell of the panels) to radiant energy (light given by the street lights).
Thus, the sequence that shows the energy transformations taking place in these lights are radiant energy → electric energy → radiant energy.
Learn more about energy transformation here: https://brainly.com/question/961052
#SPJ1
Answer:
C
Explanation:
I did the test
As a torque activity, your Physics TA sets up the arrangement decribed below. A uniform rod of mass mr = 158 g and length L = 100.0 cm is attached to the wall with a pin as shown. Cords are attached to the rod at the r1 = 10.0 cm and r2 = 90.0 cm mark, passed over pulleys, and masses of m1 = 281 g and m2 = 177 g are attached. Your TA asks you to determine the following: (a) The position r3 on the rod where you would suspend a mass m3 = 200 g in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Use standard angle notation to determine the direction of the force the pin exerts on the rod. Express the direction of the force the pin exerts on the rod as the angle F, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). r3 = Fp = F = (b) Let's now remove the mass m3 and determine the new mass m4 you would need to suspend from the rod at the position r4 = 20.0 cm in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Express the direction of the force the pin exerts on the rod as the angle F, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). m4 = Fp = F = (c) Let's now remove the mass m4 and determine the mass m5 you would suspend from the rod in order to have a situation such that the pin does not exert a force on the rod and the location r5 from which you would suspend this mass in order to balance the rod and keep it horizontal if released from a horizontal position. m5 = r5 =
Answers
a) Recall, the net torque on the rod must be zero. Thus,
Σt = 0
where
t represents torque
Thus,
t1 + t2 - tr - t3 = 0
t = rF
where
F = force
r = distance
r1F1 + r2F2 - rrFr - r3F3 = 0
r3F3 = r1F1 + r2F2 - rrFr
r3 = (r1F1 + r2F2 - rrFr)/F3
Note,
F1 = T1 = m1g
F2 = T2 = m2g
F3 = T3 = m3g
Thus,
r3 = (r1m1g + r2m2g - rrmrg)/m3g
g cancels out
r3 = (r1m1 + r2m2 - rrmr)/m3
From the information given,
r1 = 10 cm = 10/100 = 0.1 m
r2 = 90 cm = 90/100 = 0.9 m
rr = 100/2 = 50 cm = 50/100 = 0.5 m
m1 = 281 g = 281/1000 = 0.281 kg
m2 = 177g = 0.177 kg
mr = 158g = 0.158 kg
m3 = 200g = 0.2kg
By substituting these values into the equation,
r3 = (0.1 x 0.281 + 0.9 x 0.177 - 0.5 x 0.158)/0.2
r3 = 0.542 m
The force exerted by the pin, Fp = mg
g = 9.8
Fp = (m3 - mr - m1 - m2)g
Fp = (0.2 + 0.158 - 0.281 - 0.177)9.8
Fp = - 0.981
Taking the absolute value,
IFpI = 0.981 N
F = - 90 degrees
b) r1F1 + r2F2 - rrFr - r4F4 = 0
r4F4 = r1F1 + r2F2 - rrFr = 0
F4 = (r1F1 + r2F2 - rrFr)/r4
Note,
F1 = T1 = m1g
F2 = T2 = m2g
F3 = T3 = m3g
F4 = T4 = m4g
Thus,
m4g = (r1m1g + r2m2g - rrmrg)/r4
m4g = (r1m1 + r2m2 - rrmr)/r4
r4 = 0.2
By substituting these values into the equation,
m4 = (0.1 x 0.281 + 0.9 x 0.177 - 0.5 x 0.158)/0.2
m4 = 0.542 kg
The force exerted by pin is
Fp = (m4 + mr - m1 - m2(g
Fp = (0.542 + 0.158 - 0.281 - 0.177)9.8
Fp = 2.37 N
Fp = 2.37 N
F = 90 degrees
c) When the pin does not exert a force,
Fp = 0
F1 + F2 - Fr = F5
m1 + m2 - mr = m5
m5 = 0.281 + 0.177 - 0.158
m5 = 0.3 kg
Since the net torque on the rod is zero,
t1 + t2 - tr - t5
t5 = t1 + t2 - tr - t5
t5 = t1 + t2 - tr - t5
r5 = r1F1 + r2F2 - ffFr)/F5
r5 = (r1m1 + r2m2 - rrmr)/m5
r5 = (0.1 x 0.281 + 0.9 x 0.177 - 0.5 x 0.158)/0.3
r5 = 0.36
One mole of an ideal gas at 1.00 atm and 0.00°C occupies 22.4 L. How many molecules of an ideal gas are in one cm^3 under these conditions?a. 28.9 b. 22 400 c. 2.69 × 1019 d. 6.02 × 1023
Answers
Given:
Atm = 1.00 atm
Temperature = 0.00°C
Amount of gas = 1 mole which occupues 22.4 L
Let;s find the number of molecules of an ideal gas are in one cm^3 under these conditions.
We have:
1 mole of ideal gas = 22.4 L
This is called the molar volume of gas.
To find the amount of molecules, apply the avogrado's constant:
Number of molecules in 1 mol = 6.023 x 10²³
Hence, for 1 cm³, we have:
[tex]\text{ No. of molecules in 1 cm}^3=\frac{6.023\times10^{23}}{22.4\times10^3}[/tex]Solving further:
[tex]\text{ No. of molecules in 1 cm}^3=\frac{6.023\times10^{23}}{22.4\times10^3}=2.69\times10^{19}mol/cm^3[/tex]Therefore, the amount of molecules of an ideal gas in one cm^3 under these conditions is:
2.69 x 10¹⁹ mol/cm^3
ANSWER:
C. 2.69 x 10¹⁹
What is the volume of a piece of iron ( = 7.9 g/cm3) that has a mass of 0.75 kg? (Enter your answer in cm3.) answer in: cm3
Answers
We will have the following:
[tex]\begin{gathered} \frac{7.9g}{cm^3}\ast\frac{1kg}{1000g}=\frac{0.75kg}{V}\Rightarrow0.0079kg/cm^3=\frac{0.75kg}{V} \\ \\ \Rightarrow V=\frac{0.75kg}{0.0079kg/cm^3}\Rightarrow V=\frac{7500}{79}cm^3 \\ \\ \Rightarrow V\approx94.9cm^3 \end{gathered}[/tex]So, the volume is 7500/79 cm^3, that is approximately 94.9 cm^3.
What is the force of gravity between two 50.0kg masses that are separated by 0.300m?3.71x10-8N5.59x10-7N2.78x104N1.85x10-6N
Answers
We will have the following:
[tex]\begin{gathered} F=G\frac{m_1m_2}{r^2}\Rightarrow F=\frac{(6.67\ast10^{-11}m^3\ast kg^{-1}\ast s^{-2})(50kg)(50kg)}{(0.3m)^2} \\ \\ \Rightarrow F=1.852777778...\ast10^{-6}N\Rightarrow F\approx1.85\ast10^{-6}N \end{gathered}[/tex]So, the force is approximately 1.85*10^-6 N.
A 0.95 kg stone attached to a string is whirled in a horizontal circle of radius 38 cm as a conical pendulum. The string makes an angle of 40° with the vertical. (a) Find the speed of the stone. (b) Find the tension in the string.
Answers
The vertical component of the tension will be responsible for the weight of the stone while the horizontal component will be responsible for centripetal force.
a.) Speed v = 1.8 m/s
b.) Tension T = 12.2 N
Types of Circular MotionThere are motion of a body in a vertical circle and motion of a body in horizontal circle in which a conical pendulum is a good example.
Given that a 0.95 kg stone attached to a string is whirled in a horizontal circle of radius 38 cm as a conical pendulum. The string makes an angle of 40° with the vertical.
The parameters given are;
mass m = 0.95kgRadius r = 38 cm = 0.38mAngle Ф = 40°Speed v = ?Tension T = ?To find the speed of the stone, we will use the formula
TsinФ = mv²/r ...... (1)
Let us first find the tension by using the formula
TcosФ = mg
Tcos40 = 0.95 × 9.8
Tcos40 = 9.31
T = 9.31/cos40
T = 12.15 N
Substitute T in equation 1 to find the speed v
12.15sin40 = 0.95v²/0.38
2.97 = 0.95v²
v² = 2.97/0.95
v² = 3.125
v = √3.125
v = 1.77 m/s
Therefore, the tension in the string is 12.15 N and the speed of the stone is 1.8 m/s approximately
Learn more about Circular Motion here: https://brainly.com/question/106339
#SPJ1
A 2.0 microF capacitor is connected across a 60 Hz voltage source, and a current of 2.0 mA is measured on a VOM. What is the capacitive reactance of the circuit?
Answers
Let's write down and name the variables we know.
C: capacitance; C = 2 μF = 2*10^-6 F
f: frequency of voltage source; f = 60 Hz
Xc: capacitive reactance of circuit (we are solving for this)
We also know that ω = 2πf = 120π.
From this information, we can use the following equation:
Xc = 1/(ωC)
And we can solve for Xc.
Xc = 1/(120π*2*10^-6)
Xc = 1326.291 Ω
Fill in the blank: 66 in. = yd
Answers
Answer: 1.833
Explanation:
Multiply the value in inches by 0.027777777777727 (the conversion factor)
So 66 inches*.027777777777727=1.833 yards
Answer:
66inches = 1.833 yards
Explanation:
Please help me with this!
Answers
The balloon goes 25 m east in first 10 s.
Then the wind blows the balloon 35 m west in 8 s.
a
The balloon travels 25 m in 10s.
b
the balloon travels a distance 35 m in next 8 s.
c
thhe total distance travelled by the balloon is,
[tex]\begin{gathered} d=25+35 \\ =60\text{ m} \end{gathered}[/tex]d
Average speed in 10 s is,
[tex]\begin{gathered} s=\frac{25}{10} \\ =2.5\text{ m/s} \end{gathered}[/tex]e
The average speed in next 8 s is,
[tex]\begin{gathered} s_8=\frac{35}{8} \\ =4.37\text{ m/s} \end{gathered}[/tex]f
the average speed for the entire trip is,
[tex]\begin{gathered} s_{av}=\frac{25+35}{10+8} \\ =3.33\text{ m/s} \end{gathered}[/tex]g
displacement during the first 10 s is.
[tex]d_1=(25m)\hat{i}[/tex]h.
displacement during next 8 s is,
[tex]d_2=(-35m)\hat{i}[/tex]i
The total displacement is,
[tex]\begin{gathered} d_1+d_2=(25-35)\hat{i}_{} \\ =-(10m)\hat{i} \end{gathered}[/tex]j
the average velocity in 10 s is,
[tex]\begin{gathered} v_1=\frac{25m}{10}\hat{i} \\ =(2.5m)\hat{i} \end{gathered}[/tex]k
The average velocity in 8 s is,
[tex]\begin{gathered} v_2=\frac{-35\text{ m}}{8\text{ s}}\hat{i} \\ =-(4.37m)\hat{i} \end{gathered}[/tex]l
The average velocity entire the whole trip is,
[tex]\begin{gathered} v_{av}=\frac{d_1+d_2}{18} \\ =\frac{-10m\hat{i}}{18\text{ s}} \\ =-(0.55\hat{m/s)i} \end{gathered}[/tex]PLEASE HELP
Which is not an accurate statement about Earth's gravitational pull?
A) Earth's gravitational pull helps keep it in orbit.
B) Earth's gravitational pull is the same as Jupiter's gravitational pull.
C) Earth's gravitational pull is 9.8 m/s2.
D) Earth's gravity helps keep people from floating outside of the planet.
Answers
Be the action of a force of 51N, a spring measures 39cm. Its length becomes 40.8 cm when subjected to another force of 61N. 1)Determine the empty length of the spring 2)Determine an elongation which will correspond to a force of 32N.3) So what is its length
Answers
Answer:
1) 29.82 cm
2) 5.76 cm
3) 35.58 cm
Explanation:
Part 1)
The force of a spring is equal to:
F = kΔx
Where k is the constant of the spring and Δx is the elongation. Δx = xf - xi, where xf is the length of the spring when the force is applied and xi is the empty length. Then
F = k(xf - xi)
Now, by the action of a force of 51N, a spring measures 39 cm, so
51 = k(39 - xi)
And by the action of a force of 61N, the spring length is 40.8 cm, so
61 = k(40.8 - xi)
To find the empty length, we need to solve the system of equations
51 = k(39 - xi)
61 = k(40.8 - xi)
First, solve the first equation for k
[tex]k=\frac{51}{39-x_i}[/tex]Then, replace this on the second equation and solve for xi
[tex]\begin{gathered} 61=k(40.8-x_i) \\ 61=\frac{51}{(39-x_i)}(40.8-x_i) \\ 61(39-x_i)=51(40.8-x_i) \\ 61(39)-61(x_i)=51(40.8)-51(x_i) \\ 2379-61x_i=2080.8-51x_i \\ 2379-2080.8=61x_i-51x_i \\ 298.2=10x_i \\ \frac{298.2}{10}=x_i \\ 29.82=x_i \end{gathered}[/tex]Therefore, the empty length of the spring is 29.82 cm
Part 2)
Now, we need to calculate the value of k, so replacing xi = 29.82, we get:
[tex]k=\frac{51}{39-29.82}=5.556[/tex]Therefore, the equation for the force is
F = 5.556Δx
Solving for Δx, we get:
Δx = F/5.556
Replacing the force by 32N, we can calculate the elongation as
Δx = 32/5.556 = 5.76 cm
Part 3)
Then, the length can be calculated by solving the following equation for xf
Δx = xf - xi
xf = Δx + xi
Replacing Δx = 5.76 cm and xi = 29.82 cm, we get:
xf = 5.76 cm + 29.82 cm
xf = 35.58 cm
So, its length is 35.58 cm
Therefore, the answers are
1) 29.82 cm
2) 5.76 cm
3) 35.58 cm
For an object spinning around a central point, what will happen if its distance from the center is decreased
Answers
Answer:
Its a acceleration will increase
Explanation:
The force required to keep an object in a circular motion is given by
[tex]F=\frac{mv^2}{R}[/tex]where v is the radial velocity and R is the radius of the object with mass m.
Now our question is what happens to the above equation as we decrease R?
We can see that as R decreases the quantity mv^2 /R increases (since R is getting smaller ).
Hence, we conclude that F increases. But what if F? it is the centripetal force.
Since centripetal force has increased, so has the quantity v^2 /R (called the acceleration ).
Meaning an increase in centripetal force implies an increase n acceleration.
Since in the answer choices we are not given the option to increase our centripetal force, the next best choice is to choose 'acceleration will increase. '
Which of these is a property of an electromagnetic wave? A)magnetic and electric fields oscillate perpendicular to each other but not to the velocity of the wave B)transports energy C)has a magnetic wave but no electric wave
Answers
Electromagnetic waves :
- are transverse waves
- Can travel through a vacuum
- Tranport energy from one place to another
- can be reflected
-can be refracted
Correct options:
B)transports energy
The owner of a recycling company wants to reduce his electrical consumption and costs. The electromagnet used in his operation uses 12 A of current, has 7000 loops and a lifting force of 9800 N. If the lifting force needs to remain the same but the owner would like to reduce the current to only 5 A, how many loops would the electromagnet have?
Answers
Given:
Current, I = 12 A
Loops, B = 7000
Force, F = 9800 N
Let's determine the loops if the force remains the same but the current redudces to 5A.
Apply the formula:
[tex]F=\frac{I\times N}{L}[/tex]Let's solve for L.
[tex]\begin{gathered} L=\frac{I\times N}{F} \\ \\ L=\frac{12\times7000}{9800} \\ \\ L=8.57\text{ m} \end{gathered}[/tex]If the current reduces to 5 A, we have:
[tex]\begin{gathered} N=\frac{F\times L}{I} \\ \\ \text{Where I = 5 A} \\ \\ N=\frac{9800\times8.57}{5} \\ \\ N=16800\text{ } \end{gathered}[/tex]The number of loops the electromagnet would have is 16800 loops.
Shown here are astronomical objects located at different distances from earth. rank the objects based on their distances from earth, from farthest to nearest.
- star on far side of Andromeda Galaxy
- star on near side of Andromeda Galaxy
- star on far side of Milky Way Galaxy
- star near center of Milky Way Galaxy
- Orion Nebula
- Alpha Centauri
- Pluto- The Sun
Answers
The distance of astronomical objects is measure very carefully. These are having a different unit. This is the astronomical unit. The distances are very huge.
The distance between objects in space is vast and very difficult to calculate. These are learned under solar system mathematics. The values for these distances are cumbersome for astronomers and scientists to manipulate. Therefore, scientists use a unit of measurement called an astronomical unit.
Let us understand the distances first.
To know the distance of stars in Andromeda Galaxy, we should first know the distance of Andromeda Galaxy. The distance of Andromeda Galaxy from Earth is 2.5 million light years away. The astronomical unit used is the light years.
Thus, from this we can conclude that,
The star near to Andromeda Galaxy must be at a distance of 2.5 million light years away.The star far side from Andromeda Galaxy will be more than 2.5 million light years away.Now to know about the stars in Milky Way Galaxy, the distance of milky way galaxy from Earth is approximately 9 light years away.
So,
The star far from Milky Way Galaxy should be more than 9 light years away from Earth.The star near to the Milky Way Galaxy should be close to 9 light years away from Earth.Orion Nebula is 1,344 light years away.Alpha Centauri is approximately 4.3 light years away from the Earth.The Pluto is approximately 5 billion km away from the Earth.The Sun is approximately 148 million km away from the Earth.Thus, from this we can conclude that,
The farthest is the star on far side of Andromeda Galaxy, then the star on near side of Andromeda Galaxy, then comes the star on far side of Milky Way Galaxy, then the star near center of Milky Way Galaxy, then it is the Alpha Centauri, then the Orion Nebula and then it is the Pluto with the Sun being the nearest one.
To know more about astronomical distance, refer: https://brainly.com/question/28601809
#SPJ4