The 95% confidence interval for the difference between the mean amounts of caffeine is C.I = (-1.36, 7.36) and the p-value for this test is 0.169.
In statistics, a confidence interval describes the likelihood that a population parameter would fall between a set of values for a given percentage of the time. Confidence ranges that include 95% or 99% of anticipated observations are frequently used by analysts.
Therefore, it can be concluded that there is a 95% probability that the true value falls within that range if a point estimate of 10.00 is produced from a statistical model with a 95% confidence interval of 9.50 - 10.50.
a) We will set up the null hypothesis that
[tex]H_{0}: \mu_{1} = \mu_{2}[/tex] Vs
Ha
Under the null hypothesis the test statistics is.
(T1-T2) 7t 7t
Where (nl+ n2- 2)
Also we are given that
T1 80 , 12 77 , 721 15 , n2- 12 , 5 and [tex]S_{2}[/tex] = 6
[tex]\therefore S^2=\frac{(15-1)5^2+(12-1)6^2}{(15+12-2)}=5.4626[/tex]
n1 n2
[tex]C.I=(15-12)\pm 2.060*5.4626\sqrt{\frac{1}{15}+\frac{1}{12}}[/tex]
C.I = (-1.36, 7.36)
b) Also under null hypothesis
[tex]t=\frac{(\bar{x }_{1}-\bar{x }_{2})-(\mu _{1}-\mu _{2})}{S^{2}\sqrt{\frac{1}{n_{1}}+\frac{1}{n_{2}}}}[/tex]
[tex]t=\frac{(15-12)-0}{5.4626\sqrt{\frac{1}{15}+\frac{1}{12}}}[/tex]
t=1.42
Also corresponding P-Value = 0.169
Since calculated P-Value = 0.169 which is greater then 0.05 we accept our null hypothesis and concludes that there is no difference in the mean amount of caffeine of these two brands.
Learn more about Confidence interval:
https://brainly.com/question/29570668
#SPJ4
Econ112 (Stats for Econ & Bus) - Tutorial 4 Assessment To be submitted to on CANVAS, 9am Monday 25th April. Standard late penalties apply. However, any work received after the tutorial seminar starts will receive a mark of zero as solutions are discussed here. [Any technical problems hard copy submissions must be resolved via help-ticket to CSD] ALL questions are worth 1 Mark. SECTION A (C.I. & Hypothesis-Test with known 0 - see lectures week 8) [6 Marks] Question 1 The business model for flying in the USA tends to be towards a 'base' pricing model with additional ch arges for flight options, including baggage checking(!) Nine American airlines were selected at rando m. For each airline, the current fee for checking a single bag was recorded. The average for these 9 airlines is x = $25. Assume that the current fee follows a normal distribution with unknown mean u an d standard deviation o = - $6. = A 90% confidence interval for p is: A) $25 + $6.00 B) $25 + $3.29 C) $25 + $3.92
D) $25 + $9.87 E) $25 + $11.76
The 90% confidence interval for the average fee for checking a single bag is $21.71 to $28.29, which corresponds to option B) $25 + $3.29
To calculate a 90% confidence interval for the average fee for checking a single bag.
To calculate a 90% confidence interval, we need the sample mean (X), the standard deviation (σ), and the sample size (n). From your question, we have:
X = $25
σ = $6
n = 9
Since we know the standard deviation, we can use the z-score for a 90% confidence interval, which is 1.645 (you can find this in a standard z-table).
Next, we need to calculate the standard error (SE), which is the standard deviation divided by the square root of the sample size:
[tex]SE=\frac{σ}{\sqrt{n} }[/tex]
[tex]SE= \frac{ 6}{\sqrt{9} }[/tex]
[tex]SE= \frac{ 6}{3 }[/tex]
SE = $2
Now, multiply the z-score by the standard error:
Margin of Error (ME) = 1.645 × SE
ME = 1.645 × $2
ME = $3.29
Finally, construct the 90% confidence interval by adding and subtracting the margin of error from the sample mean:
Lower Limit: X - ME = $25 - $3.29 = $21.71
Upper Limit: X + ME = $25 + $3.29 = $28.29
Thus, the 90% confidence interval for the average fee for checking a single bag is $21.71 to $28.29, which corresponds to option B) $25 + $3.29.
To know more about "Standard deviation" refer here:
https://brainly.com/question/23907081#
#SPJ11
solve m^4 =625
m= +156.5
m= +5
m cannot be found
m= +125
Please look at picture
Answer:
m = +/- 5
Step-by-step explanation:
We can solve the equation by taking the fourth root of both sides.
[tex]+/-\sqrt[4]{m^4}=+/-\sqrt[4]{625} \\m=5\\m=-5[/tex]
(5)(5)(5)(5) = 625
(-5)(-5)(-5)(-5) = 625
The +/- in the answers come from the fact that whenever you have a even exponent (e.g., x^2 or m^4), you always get a positive answer, even if the base you're raising to the particular exponent is negative
measurements of water quality were taken from a river downstream from an abandoned chemical dumpsite. concentrations of a certain chemical were obtained from 9 measurements taken at the surface of the water, 9 measurements taken at mid-depth of the water, and 9 measurements taken at the bottom of the water. what type of study was conducted, and what is the response variable of the study? responses an experiment was conducted, and the response variable is the concentration of the chemical.
Answer:
The type of study conducted is an observational study. The response variable of the study is the concentration of the chemical.
the estimated resale value (in dollars) of a company car after years is given by 23,351 0.783 . what is the rate of depreciation (in dollars per year) after 2 years? round to the nearest cent. the car is depreciating at $ per year. note: the rate of depreciation is |r'(t)|. your answer should be positive.
To find the rate of depreciation after 2 years, we need to find the derivative of this function at t = 2.
V(t) = 23,351(0.783)^t
V'(t) = 23,351(0.783)^t * ln(0.783) [Using the chain rule]
V'(2) = 23,351(0.783)^2 * ln(0.783) ≈ -2,346.29
Since we are interested in the absolute value of the rate of depreciation, we can ignore the negative sign. Therefore, the car is depreciating at $2,346.29 per year (rounded to the nearest cent).
Note that this is the instantaneous rate of depreciation at t = 2. The average rate of depreciation over the first two years would be the difference in resale value divided by the number of years, which would be:
[(23,351(0.783)^2) - 23,351] / 2 ≈ $2,336.67 per year
Hi! To find the rate of depreciation after 2 years, we need to first determine the resale value of the car after 2 years and then find the difference in value per year. Here's a step-by-step explanation:
1. Plug in the given years (t=2) into the formula for the estimated resale value: V(t) = 23,351(0.783^t)
2. Calculate the resale value after 2 years: V(2) = 23,351(0.783^2) ≈ 14,342.76 (rounded to the nearest cent)
3. Find the depreciation value by subtracting the resale value from the initial value: Depreciation = Initial Value - Resale Value = 23,351 - 14,342.76 ≈ 9,008.24
4. Calculate the rate of depreciation per year: Rate of Depreciation = Depreciation / Years = 9,008.24 / 2 ≈ 4,504.12
The car is depreciating at approximately $4,504.12 per year after 2 years, rounded to the nearest cent.
Learn more about :
Depreciation : brainly.com/question/29748690
#SPJ11
What is the value of x in the equation 4.76 - (23 x*51)-1(-33x+1):
The required value of x in the given equation is -0.00047.
Let's first simplify the expression inside the parentheses:
-33x+1 = 1-33x
Now, we can substitute this back into the original equation and use order of operations (PEMDAS) to simplify:
4.76 - (23 x 51)-1(-33x+1) = 4.76 - (23/51)(1-33x)
= 4.76 - (23/51) + (23/17)x
Now, we want to solve for x. We'll start by isolating the term with x on one side of the equation:
(23/17)x = 4.76 - (23/51)
x =-0.00047
Therefore, the value of x in the given equation is -0.00047.
Learn more about equations here:
brainly.com/question/11536910
#SPJ1
answer all boxes and read the questions
The area of the lateral face of cylinder = 150.79 ft²
The area of the two bases of the cylinder = 56.55 ft²
The total surface area of the cylinder = 207.34 ft²
We know that the formula for the surface area of cylinder is:
A = 2πrh + 2πr²
where r is the radius of the cylinder
and h is the height of the cylinder
Here, r = 3 ft and h = 8 ft
The area of the lateral face of cylinder would be,
A₁ = 2 × π × r × h
A₁ = 2 × π × 3 × 8
A₁ = 48 × π
A₁ = 150.79 sq. ft.
And the area of two bases is,
A₂ = 2πr²
A₂ = 2 × π × 3²
A₂ = 18 × π
A₂ = 56.55 sq. ft.
The total surface area of cylinder would be,
A = A₁ + A₂
A = 150.79 + 56.55
A = 207.34 sq. ft.
Therefore, the required surface area of cylinder = 207.34 ft²
Learn more about the area of cylinder here:
https://brainly.com/question/22074027
#SPJ1
Show your work or explain in complete sentences how to find Stephen's net income. Use the following information: Stephen earns $11 per hour at his job. Last month, Stephen worked for 32 hours. On his paycheck, Stephen noticed that he paid $37.30 for federal income tax, $21.82 for Social Security, and $5.10 for Medicare.
Stephen's net income is $287.78.
How to find Stephen's net income?
Stephen earns $11 per hour at his job and worked for 32 hours. The gross income (income before deduction) is:
gross income = 11 * 32 = $352
Stephen's net income is the money left afer deducting federal income tax, Social Security, and Medicare.
Net income = $352 - $37.30 - $21.82 - $5.10
Net income = $287.78
Learn more about net income on:
https://brainly.com/question/15530787
#SPJ1
can someone pls help.
Given: The solution to [tex]x^3[/tex] = [tex]-2-i[/tex] In polar form Is:
[tex]2 < 75^o, 2 < 195^o, 2 < 315^o[/tex]
Answer:
[tex]\large \boxed{\mathrm{ion \ even \ no \ fr}}[/tex]
Step-by-step explanation:
DO IT YOUR SELF [tex]\large \boxed{\mathrm{BOZO}}[/tex]
Grandfather and his grandson started drinking tea and asked the grandson to bring some candy out of the box. The box contained 2 candies with nuts, 4 candies with caramel, 3 candies with marzipan and 1 candy with licorice. As the grandson was still small and the box was high on the shelf, he did not see what kind of candy he was taking. Find the probability that 1) 4 candies taken from the box blindly have different tastes; 2) 2 candies have the same taste; 3) 6 candies include 2 candies with marzipan, 2 candies with nuts and 2 candies with caramel.
a) Write down all the events that are asked to be probable using the symbols provided.
b) Find all probabilities asked by the number of combinations. For each calculation, present a calculation formula and then calculate
asked probability. (Please provide details on conversions and calculations.)
a) Let A denote the event that 4 candies taken have different tastes, B denote the event that 2 candies have the same taste, and C denote the event that 6 candies include 2 candies with marzipan, 2 candies with nuts and 2 candies with caramel.
b) The probability of event A is 1/210
The probability of event B is 5/126
The probability of event C is 3/70
To find the probability of event A, we need to count the number of ways to choose 4 candies out of 10, where each candy has a different taste. Thus, the probability of event A is given by:
P(A) = (2/10) * (4/9) * (3/8) * (1/7) = 1/210To find the probability of event B, we need to count the number of ways to choose 2 candies of the same taste and 2 candies of different tastes out of 10. There are 4 choices for the taste of the 2 candies that are the same, and 6 choices for the taste of the other 2 candies. Thus, the probability of event B is given by:
P(B) = (4/10) * (6/9) * (5/8) * (3/7) = 5/126To find the probability of event C, we need to count the number of ways to choose 2 candies with marzipan, 2 candies with nuts, and 2 candies with caramel out of 10. There are (3 choose 2) = 3 ways to choose 2 candies with marzipan, (2 choose 2) = 1 way to choose 2 candies with nuts, and (4 choose 2) = 6 ways to choose 2 candies with caramel. Thus, the probability of event C is given by:
P(C) = (316) / (10 choose 6) = 9/210 = 3/70Learn more about probability
https://brainly.com/question/24756209
#SPJ4
factory produces cylindrical bar: The production process can be modelling by normal distribution with mean length of Cm and a standard deviation of 0.25 CM, (a) What is the probability that a randomly selected bar has length shorter than 11.75 cm? 100 cylindrical bars are randomly selected for quality checking: (b) What are the mean and standard deviation of the sample mean length? (c) What is the probability that the sample mean length will be between 10.99 cm and [[.01 cm? (d) If 92.65% of the sample means are more than a specific length L, find L
We need to solve the equation 1 - Φ((L - Cm)/0.025) = 0.9265 for L. This can be done using a standard normal table or calculator.
(a) Let X be the length of the cylindrical bar. Then X ~ N(Cm, 0.25^2). We need to find P(X < 11.75).
Z = (X - Cm)/0.25 follows standard normal distribution.
P(X < 11.75) = P((X-Cm)/0.25 < (11.75-Cm)/0.25) = P(Z < (11.75-Cm)/0.25)
Using a standard normal table or calculator, we get P(Z < (11.75-Cm)/0.25) = Φ((11.75-Cm)/0.25)
where Φ is the cumulative distribution function of the standard normal distribution.
(b) The sample mean length, X, follows normal distribution with mean Cm and standard deviation σ/√n, where n = 100 is the sample size. So, X ~ N(Cm, 0.25/√100) = N(Cm, 0.025). Therefore, the mean of the sample mean length is Cm and the standard deviation of the sample mean length is 0.025.
(c) We need to find P(10.99 < X < 11.01), where X is the sample mean length.
Z = (X - Cm)/(0.025) follows standard normal distribution.
P(10.99 < X < 11.01) = P((10.99 - Cm)/(0.025) < Z < (11.01 - Cm)/(0.025))
Using a standard normal table or calculator, we get P((10.99 - Cm)/(0.025) < Z < (11.01 - Cm)/(0.025)) = Φ((11.01 - Cm)/(0.025)) - Φ((10.99 - Cm)/(0.025))
(d) Let L be the length such that 92.65% of the sample means are more than L. This means we need to find the value of L such that P(X > L) = 0.9265.
Z = (X - Cm)/(0.025) follows standard normal distribution.
P(X > L) = P(Z > (L - Cm)/0.025) = 1 - Φ((L - Cm)/0.025)
Therefore, we need to solve the equation 1 - Φ((L - Cm)/0.025) = 0.9265 for L. This can be done using a standard normal table or calculator.
To learn more about distribution visit:
https://brainly.com/question/29062095
#SPJ11
The average number of cavities that 30-year-old Americans have had in their lifetimes is 11. The standard deviation 2.7 cavities. Do 20 year olds have more cavities? The data show the results of a survey of 16 twenty-year-olds who were asked how many cavities they have had. Assume that that distribution of the population is normal.
6, 7, 7, 8, 7, 8, 9, 6, 5, 6, 7, 8, 7, 6, 9, 8
What can be concluded at the 0.05 level of significance?
H0:mu.gif= 7
Ha:mu.gif[ Select ] ["<", "Not Equal to", ">"] 7
Test statistic: [ Select ] ["F", "t", "Chi-square", "Z"]
p-Value = [ Select ] ["0.063", "0.427", "0.126", "0.032"] . Round your answer to three decimal places.
[ Select ] ["Fail to reject the null hypothesis", "Reject the null hypothesis"]
Conclusion: There is [ Select ] ["sufficient", "insufficient"] evidence to make the conclusion that the population mean number of cavities for 20-year-olds is more than 11
Show transcribed image text
We do not have sufficient evidence to conclude that 20-year-olds have more cavities than 30-year-olds.
First, we need to calculate the sample mean and standard deviation of the given data:
x = (6+7+7+8+7+8+9+6+5+6+7+8+7+6+9+8)/16 = 7
s = sqrt((Σ(x - x)²)/(n-1)) = sqrt((Σ(x²) - n(x)²)/(n-1)) = 1.247
Now, we can set up the hypothesis test:
H0: μ = 7 (20-year-olds have the same average number of cavities as 30-year-olds)
Ha: μ > 7 (20-year-olds have more cavities than 30-year-olds)
We will use a t-test since the population standard deviation is unknown and we have a small sample size (n = 16). The test statistic is:
t = (x - μ) / (s/sqrt(n)) = (7 - 7) / (1.247/sqrt(16)) = 0
The degrees of freedom is n-1 = 15. Using a t-table with α = 0.05 and df = 15, we find the critical value to be 1.753.
The p-value is the probability of getting a t-value as extreme or more extreme than the calculated t-value under the null hypothesis. Since our null hypothesis is that μ = 7 and our alternative hypothesis is that μ > 7, we have a one-tailed test. Using a t-table with df = 15, we find the p-value to be 0.5.
Since our p-value (0.5) is greater than α (0.05), we fail to reject the null hypothesis. We do not have sufficient evidence to conclude that 20-year-olds have more cavities than 30-year-olds.
To learn more about hypothesis visit:
https://brainly.com/question/29519577
#SPJ11
suppose the length, in words, of the essays written for a contest are normally distributed and have a known population standard deviation of 325 words and an unknown population mean. a random sample of 25 essays is taken and gives a sample mean of 1640 words. identify the parameters needed to calculate a confidence interval at the 98% confidence level. then find the confidence interval. z0.10 z0.05 z0.025 z0.01 z0.005 1.282 1.645 1.960 2.326 2.576 you may use a calculator or the common z values above. round all numbers to three decimal places, if necessary.
The 98% confidence interval for the population mean is (1473.06, 1806.94).
The parameters needed to calculate a confidence interval are:
Sample mean (x) = 1640
Population standard deviation (σ) = 325
Sample size (n) = 25
Confidence level = 98%
To find the confidence interval, we can use the formula:
CI = x ± z*(σ/√n)
where z* is the z-score associated with the desired confidence level.
Since the confidence level is 98%, we need to use the z-score associated with a tail probability of 0.01 (0.5% on each tail). From the table given, this is z0.005 = 2.576.
Substituting the values, we get:
CI = 1640 ± 2.576*(325/√25) = 1640 ± 166.94
Therefore, the 98% confidence interval for the population mean is (1473.06, 1806.94).
Learn more about confidence interval at https://brainly.com/question/31684473
#SPJ11
What value of x will make M the midpoint of PO if PM-3x-1 and PQ-5x+3?
The value of x that would make M the midpoint of PQ if PM = 3x-1 and PQ = 5x+3 include the following: 2.
How to determine the midpoint of a line segment?In Mathematics, the midpoint of a line segment with two end points can be calculated by adding each end point on a line segment together and then divide by two (2).
Since M is the midpoint of line segment PO, we have the following:
Line segment PM = Line segment PQ
3x - 1 = 5x + 3
5x - 3x = 3 + 1
2x = 4
x = 4/2
x = 2
PM = 3x - 1 = 3(2) - 1 = 6 - 1 = 5 units.
PQ = 5x + 3 = 5(2) + 3 = 10 + 3 = 13 units.
Read more on midpoint here: brainly.com/question/17918978
#SPJ1
Solve using elimination. 10x + 8y = 12 4x + y = –15 ( , )
Answer:
x = -6
Step-by-step explanation:
you have given
10x + 8y = 12 and 4x + y = -15
so you must put the one var. x or y by same cofficent and in opposite sighn
so 10x + 8y = 12
- 8 (4x + y = -15 ) ......... i multiplied by -8
10x + 8y = 12
-32x - 8y = 120
then you will add the equation
(10x + 8y) + (-32x - 8y) = 12 + 120
afeter you simlify it u will get
-22x = 132
-22x = 132
x = -6 .... by dividing both sides by -22
Answer:
(-6,9)
Step-by-step explanation:
Multiply 4x + y = -15 all the say through by -8 and then add to 10x + 8y = 12
-32x -8y = 120
10x + 8y = 12
-22x = 132 Divide both sides by -22
x = -6
Substitute -6 for x
4x + y = -15
4(-6) + y = -15
-24 + y = -15 Add 24 to both sides
y = 9
Check
10x + 8y = 12
10(-6) + 8(9) = 12
-60 + 72 = 12
12 = 12 checks
4x + y = -15
4(-6) + 9 = -15
-24 + 9 = -15
-15 = -15 Checks.
Helping in the name of Jesus.
What is the value of M?
Answer:
44 degrees
Step-by-step explanation:
To solve this problem you can subtract 70 by 26. You can do this because those two angles add to the more significant angle. Therefore, to solvr this all you have to do is subtract 70-26. Doing so gives you your answer of 44 degrees
The manager has 20 welders available. Calculate the number of frames they will complete in 4 hours.
The number of frames that the welders would be able to complete in 4 hours would be 10 frames.
How to find the number of frames ?The time taken by one welder is 8 hours for one frame which means the work rate would be:
= 1 / 8
= 1 / 8 frames per hour
If we have 20 welders therefore, the work rate per hour would be :
= 1 / 8 x 20
= 2. 5 frames per hour
Given 4 hours, the number of frames they would make is:
= 2. 5 x 4 hours
= 10 frames
Find out more on welding at https://brainly.com/question/16180158
#SPJ1
First part of question is:
A welding company produces burglar frames for windows and doors. In order to complete one frame, one welder needs 8 hours.
PLEASE HELP!
Solve questions 1 through 5
The stereo system installer needs 170 ft of speaker wire.
How to calculate the valueIn this case, the two diagonals of the rectangular room are the longest sides of two right triangles. The length of one diagonal can be found by:
d1 = √(40² + 75²)
d1 = √(1600 + 5625)
d1 = √7225
d1 = 85 ft
Similarly, the length of the other diagonal is also 85 ft.
Total speaker wire = 2 × 85 ft = 170 ft
So, the stereo system installer needs 170 ft of speaker wire.
Learn more about word problem on
https://brainly.com/question/21405634
#SPJ1
exercise 1 find the surface area of the surface parametrized (and graphed) by the following commands. (you will need to cut and paste before you can evaluate them.) f[s , t ]
The surface area of a surface parametrized by a function f(s, t), we use the formula:
Surface Area = ∫∫ √[f_s(s,t)^2 + f_t(s,t)^2 + 1] ds dt
The formula above calculates the surface area by integrating the square root of the sum of the squares of the partial derivatives of f with respect to s and t, plus one, over the surface.
Essentially, the formula is finding the magnitude of the gradient of the surface, which gives the rate of change of the surface in all directions.
Surface Area = ∫∫ √[f_s(s,t)^2 + f_t(s,t)^2 + 1] ds dt
The surface area formula can be used to find the surface area of various types of surfaces, such as parametric surfaces, implicit surfaces, and surfaces of revolution.
However, the integration required to evaluate the formula can be quite challenging, especially for complex surfaces. In such cases, numerical methods may be used to approximate the surface area.
Learn more about Surface area:
brainly.com/question/29298005
#SPJ11
helpppppp!! The mass of a car is 1990 kg rounded to the nearest kilogram. The mass of a person is 58.7 kg rounded to 1 decimal place. Write the error interval for the combined mass, m , of the car and the person in the form a ≤ m < b
Answer:
The mass of the car rounded to the nearest kilogram is 1990 kg, which has an error interval of 1989.5 kg ≤ car mass < 1990.5 kg.
The mass of the person rounded to 1 decimal place is 58.7 kg, which has an error interval of 58.65 kg ≤ person mass < 58.75 kg.
To find the error interval for the combined mass, we need to add the lower and upper bounds of the two intervals:
1989.5 kg + 58.65 kg = 2048.15 kg
1990.5 kg + 58.75 kg = 2049.25 kg
Therefore, the error interval for the combined mass, m, of the car and the person is: 2048.15 kg ≤ m < 2049.25 kg
Answer:
To find the error interval for the combined mass of the car and the person, we need to consider the possible maximum and minimum values for the masses.
For the car, since it is rounded to the nearest kilogram, the actual mass could be anywhere between 1989.5 kg and 1990.5 kg.
For the person, since it is rounded to 1 decimal place, the actual mass could be anywhere between 58.65 kg and 58.75 kg.
To find the maximum and minimum combined masses, we add the maximum possible mass of the car (1990.5 kg) to the maximum possible mass of the person (58.75 kg) and we add the minimum possible mass of the car (1989.5 kg) to the minimum possible mass of the person (58.65 kg):
Maximum combined mass = 1990.5 kg + 58.75 kg = 2049.25 kg
Minimum combined mass = 1989.5 kg + 58.65 kg = 2048.15 kg
Therefore, the error interval for the combined mass, m, of the car and the person is:
2048.15 kg ≤ m < 2049.25 kg
How to solve a problem
please show all workExpress the following in degrees only. Be sure to use the decimal form. a. 39°50¢ a) b. 42°35¢ b) c. 15°20€ c) d. 1°59€ d) Convert the following from arc units into time units: a. 28°49€
28°49€ arc unit into time is approximately 1.867 hours.
We'll convert the given angles from degrees, minutes, and seconds (or cents and euros as placeholders) to degrees in decimal form. Then, we'll convert the angle from arc units to time units.
a) 39°50¢
To convert 50¢ to degrees, divide by 60 (since 1 degree = 60 minutes):
50¢ / 60 = 0.8333 (rounded to four decimal places)
So, 39°50¢ in decimal form is:
39 + 0.8333 = 39.8333°
b) 42°35¢
To convert 35¢ to degrees:
35¢ / 60 = 0.5833 (rounded to four decimal places)
So, 42°35¢ in decimal form is:
42 + 0.5833 = 42.5833°
c) 15°20€
To convert 20€ to degrees (1 degree = 3600 seconds):
20€ / 3600 = 0.0056 (rounded to four decimal places)
So, 15°20€ in decimal form is:
15 + 0.0056 = 15.0056°
d) 1°59€
To convert 59€ to degrees:
59€ / 3600 = 0.0164 (rounded to four decimal places)
So, 1°59€ in decimal form is:
1 + 0.0164 = 1.0164°
Now, we'll convert 28°49€ from arc units to time units:
28°49€ = 28 + (49 / 3600) = 28.0136° (in decimal form)
To convert degrees to time units, multiply by 24 (since there are 24 hours in a day) and divide by 360 (since there are 360 degrees in a circle):
28.0136° * (24 / 360) = 1.867 (rounded to three decimal places)
So, 28°49€ in time units is approximately 1.867 hours.
To learn more about degree
https://brainly.com/question/8306416
#SPJ11
I do not know what is -4x + 8 = 42
Answer:
-8.5
Step-by-step explanation:
First we need to get the -4x by it self which means moving the 8 so what we need to do is subtract 8 from its self and what we do on one side we do to the other so 42-8=34 then the last thing to do is just divided 34 divided by -4 and we get
-8.5 as the answer.
PLS GIVE BRAINLIST MEAN THE WORLD
HAVE A GREAT DAY!!
In a PivotTable, you can group data by _______ field typescalculated or filtereddate or numberlogical parameters or textincremental or value
In a PivotTable, you can group data by date or number field types. To do this, follow these steps:
1. Select your PivotTable by clicking on any cell within it.
2. Choose the date or number field you want to group.
3. Right-click the selected field and click "Group" from the context menu.
4. In the Grouping dialog box, specify the grouping options based on your preferences (e.g., grouping by months, years, or specific intervals).
5. Click "OK" to apply the grouping.
Please note that grouping data by calculated, filtered, logical parameters, text, incremental, or value field types is not directly supported in a PivotTable.
To learn more about PivotTable
https://brainly.com/question/30154540
#SPJ11
Select the numbers that are arranged from greatest to least. OA) 1.6 x 10; 1.62 x 10¹: 1.7 x 10- OB) 1.62 x 104; 1.6 1.6 10'; 10; 1.7 x 10 ¹ OC) 1.6 x 10; 1.7 x 10; 1.62 x 104 OD) 1.62 x 10; 1.7 x 10; 1.6 x 10'
The numbers that are arranged from greatest to least are
B) 1.62 x 104; 1.6 1.6 10'; 10; 1.7 x 10 ¹ C) 1.6 x 10; 1.7 x 10; 1.62 x 104How to arrange the numbers form greatest to leastLet's first rewrite the given options in a clearer way and compare the numbers:
A) 1.6 x 10^0; 1.62 x 10^1; 1.7 x 10^(-1)
B) 1.62 x 10^4; 1.6 x 10^1; 1.7 x 10^1
C) 1.6 x 10^0; 1.7 x 10^0; 1.62 x 10^4
D) 1.62 x 10^0; 1.7 x 10^0; 1.6 x 10^1
Simplifying the numbers
Option A:
1.6 x 10^0 = 1.6; 1.62 x 10^1 = 16.2; 1.7 x 10^(-1) = 0.17
not in descending order
Option B:
1.62 x 10^4 = 16200; 1.6 x 10^1 = 16; 1.7 x 10^1 = 17
in descending order
Option C:
1.6 x 10^0 = 1.6; 1.7 x 10^0 = 1.7; 1.62 x 10^4 = 16200
in descending order
Option D:
1.62 x 10^0 = 1.62; 1.7 x 10^0 = 1.7; 1.6 x 10^1 = 16
not in descending order
Hence we can say that options B and C correctly sorted numbers from highest to lowest as follows:
Learn more about highest to lowest at
https://brainly.in/question/14704786
#SPJ`
8.3.23. true or false: if a is a complete upper triangular matrix, then it has an upper triangular eigenvector matrix s.
The answer is: True. When matrix A is upper triangular, its eigenvalues are located on its main diagonal. If you find the eigenvectors corresponding to each eigenvalue, you can construct an eigenvector matrix S.
An upper triangular matrix is a square matrix in which all entries below the main diagonal are zero. An eigenvector of a matrix A is a nonzero vector x such that Ax is a scalar multiple of x. That is, there exists a scalar λ such that Ax = λx.
For a complete upper triangular matrix, all of its eigenvalues are on the diagonal. To see this, consider the characteristic polynomial of a complete upper triangular matrix:
p(λ) = det(A - λI)
where I is the identity matrix. Since A is upper triangular, its determinant is the product of its diagonal entries, and det(A - λI) is a polynomial of degree n (the size of the matrix) in λ. Therefore, there are n roots of p(λ), which correspond to the eigenvalues of A. Since A is completely upper triangular, all of its eigenvalues are on the diagonal.
Now, let's consider the eigenvector matrix S of A. This is a matrix whose columns are the eigenvectors of A. Since A is upper triangular, any eigenvector of A must also be upper triangular (or zero). Therefore, the eigenvector matrix S must also be upper triangular. In summary, if a is a complete upper triangular matrix, then all of its eigenvalues are on the diagonal, and its eigenvector matrix S is upper triangular. Therefore, the statement is true.
"If A is a complete upper triangular matrix, then it has an upper triangular eigenvector matrix S." When a matrix A is upper triangular, its eigenvalues are located on its main diagonal. If you find the eigenvectors corresponding to each eigenvalue, you can construct an eigenvector matrix S. Since A is upper triangular, the eigenvector matrix S will also be upper triangular.
Learn more about matrix here: brainly.com/question/28180105
#SPJ11
Which of the following is the function for the graph below?
The function graphed is defined as follows:
y = -2(x - 2)² + 3.
How to obtain the equation of the parabola?The equation of a parabola of vertex (h,k) is given by the equation presented as follows:
y = a(x - h)² + k.
In which a is the leading coefficient.
The coordinates of the vertex in this problem are given as follows:
(2,3).
Hence the parameters are h = 2 and k = 3, thus:
y = a(x - 2)² + 3
When x = 0, y = -5, hence the leading coefficient a is obtained as follows:
-5 = 4a + 3
4a = -8
a = -2.
Thus the equation is:
y = -2(x - 2)² + 3.
More can be learned about quadratic functions at https://brainly.com/question/1214333
#SPJ1
Let M = R and d: MXM → R be discrete metric, namely, d(x, y) = 0 if x = y and d(x, y) = 1 if x # y for x,y € M. Verify that (M,d) is metric space.
all four properties are satisfied, we can conclude that (M,d) is a metric space.
What is metric space?
In mathematics, a metric space is a set of objects called points, together with a function called the distance function or metric, that defines a notion of distance between any two points in the space. The metric satisfies certain conditions to ensure that it is a useful measure of the "distance" between points, such as being non-negative, symmetric, and satisfying the triangle inequality. Metric spaces are used to study properties of objects that can be thought of as having a notion of distance, such as Euclidean space, graphs, and networks.
Let's check each of these properties:
Non-negativity: This property holds since d(x, y) is defined to be 0 or 1, both of which are non-negative.
Identity of indiscernibles: This property also holds since d(x, y) is defined to be 0 if and only if x = y.
Symmetry: This property holds since d(x, y) = d(y, x) for any x, y in M.
Triangle inequality: For any x, y, z in M, there are three cases to consider:
If x = y or y = z, then d(x, y) + d(y, z) = d(x, z) = 1 by definition, and the inequality holds.
If x = z, then both sides of the inequality are 0.
If x, y, and z are all distinct, then d(x, y) + d(y, z) = 2 and d(x, z) = 1, so the inequality holds.
Since all four properties are satisfied, we can conclude that (M,d) is a metric space.
Learn more about metric space, by the following link.
https://brainly.com/question/31129859
#SPJ4
Sam had four math tests last month. His scores were 81, 94, 83, and 91. What is the median of his scores?
Answer:
87
Step-by-step explanation:
first you need to know the median is the middle of the data set.
so 81, 83, 91, 94 the middle is 83 and 91 but you match inbetween both of those so the answer would be 87.
Hope this helps!! good luck
What is the y-intercept of the function f(x)= -4(6)^x +1
a) (0, 1)
b) (0, -3)
c) (-4, 0)
d) (-0.774, 0)
How many blocks are needed to complete the full cube
The number of blocks needed to complete the big or full cube depends on size of cube. So, number of blocks required to complete it equals to 45.
A cube is a three-dimensional geometry, which may be solid or hollow and containing six equal squares. According to the shape of the cube, we can make a cube from any cubes. Now look at the cube image above. There is one more layer of blocks to fill in because the blocks are still 5 blocks by 4 blocks (not make a cube). We need to add another 25 blocks at the top to meet the cube definition. Some times we would often just count the missing blocks which is 20 here but after adding all 20 blocks in figure still it isn't a cube. So, 20 is wrong because the sides won’t be equal. The width and the length is made of 5 blocks but the height is just four blocks. So, it's need to add another 25 blocks the top to make it a cube. Hence, the correct answer is 45.
For more information about cube, visit :
https://brainly.com/question/13329957
#SPJ4
Complete question:
The above figure complete the question.
How many blocks are needed to complete the full cube ?