A circuit can only light up a lightbulb if there is a ______ path for electricity to travel from one end of the energy source to the other end.

Answer:

i don't know the correct answer

but this is what i found on web

Explanation:

Changes of state are physical changes in matter. They are reversible changes that do not change matter's chemical makeup or chemical properties. Processes involved in changes of state include melting, freezing, sublimation, deposition, condensation, and evaporation. Energy is always involved in changes of state.

Answer:

724.3J/Kg.K

Explanation:

CHECK THE COMPLETE QUESTION BELOW

Compute the specific heat capacity at constant volume of nitrogen (N2) gas.and compare with specific heat of liquid water. The molar mass of N2 is 28.0 g/mol.

The specific heat capacity can be computed by using expression below

c= CV/M

Where c= specific heat capacity

M= molar mass

CV= molar hear capacity

Nitrogen is a diatomic element, the Cv can be related to gas constant with 5/2R

Where R= 8.314J/mol.k

Molar mass= 28 ×10^-3Kg/mol

If we substitute to the expression, we have

c= (5R/2)/(M)

=5R/2 × 1/M

=(5×8.314) /(2×28 ×10^-3)

=724.3J/Kg.K

Hence, the specific heat capacity at constant volume of nitrogen (N2) gas is

724.3J/Kg.K

The specific heat of liquid water is about 4182 J/(K kg) which is among substance with high specific heat, therefore specific heat of Nitrogen gas is 724.3J/Kg.K which is low compare to that of liquid water.

Potential energy+Kinetic energy=Total energy

When you release a spring the velocity increases, therefore the kinetic energy increases ke=1/2*mv^2 and the displacement decreases therefore the potential energy decreases pe=1/2*kx^2.

Answer:

chemical symbol: Th

atomic number:90

protrons :90

neutrons:142

group#:4

period#: 9

Explanation:

you take the atomic weight (232.038)and subtract the atomic number to get (90) which is your neutrons

Answer:

t = 66.7 s

Explanation:

Given that,

Speed of a hare, v = 15 m/s

Speed of a turbocharged tortoise, v' = 3 m/s

The hare in a 250 meter race

Let the Hare takes time t. It can be calculated as follows :

[tex]t=\dfrac{250}{15}=16.67\ s[/tex]

Let a turbocharged tortoise takes t'. It can be calulated as follows :

[tex]t'=\dfrac{250}{3}= 83.33\ s[/tex]

To tie the race, required time is given by :

[tex]\Delta t = t'-t\\\\=83.33-16.67\\\\=66.66\ s\\\\\approx 66.7\ s[/tex]

Hence, the correct option is (b) i.e. 66.7 seconds.

Complete Question

a car traveling at 28.4 m/s undergoes a constant deceleration of 1.92 m/s2 when the breaks are applied. How many revolutions does each tire make before the car comes to a stop? Assume that the car does not skid and that each tire has a radius of 0.307 m. Answer in units of rev.

Answer:

The value is  [tex]N = 109 \ rev[/tex]      

Explanation:

From the question we are told that

    The speed of the car is  [tex]u = 28.4 \ m/s[/tex]

     The constant deceleration experienced is  [tex]a = 1.92 \ m/s^2[/tex]

      The radius of the tire is  [tex]r = 0.307 \ m[/tex]

Generally from kinematic equation we have that

      [tex]v^2 = u^2 + 2as[/tex]

Here  v is the final velocity which is  0 m/s

   So

         [tex]0^2 = 28.4^2 + 2 * 1.92 * s[/tex]

=>      [tex]s = 210.04 \ m[/tex]

Generally the circumference of the tire is mathematically represented as

         [tex]C = 2 \pi r[/tex]

=>      [tex]C = 2 * 3.142 * 0.307[/tex]    

=>      [tex]C = 1.929 \ m[/tex]

Generally the number of revolution is mathematically represented as

         [tex]N = \frac{ s}{C}[/tex]    

=>     [tex]N = \frac{210.04}{1.929}[/tex]

=>     [tex]N = 109 \ rev[/tex]      

Answer:

a). a = F/m

Explanation:

Formula is F=ma

Answer:98

Explanation:hope this helps!

Answer:

a) [tex]H_{in}=39.34 kJ[/tex]

b) Efficiency=76.77%

Explanation:

a)

In order to solve this problem, we can use the following formula:

[tex]H_{in}=H_{out}+W[/tex]

the problem provides us with all the necessary information so we can directly use the formula:

[tex]H_{in}=9.14kJ+30.2kJ[/tex]

[tex]H_{in}=39.34 kJ[/tex]

b) In order to find the efficiency, we can use the following formula:

[tex]Efficiency=\frac{W}{H_{in}}*100\%[/tex]

so we get:

[tex]Efficiency=\frac{30.2kJ}{39.34kJ}*100\%[/tex]

Efficiency=76.77%

Answer:

O A. Freudian concepts

Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality. He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).

Explanation:

Hope this helped!

O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.

He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).

One of the case studies most closely linked with the Austrian psychotherapist Sigmund Freud is the hysterics and treatment of Anna O.

Despite the fact that Freud is intimately identified with Anna O, it is thought that he never actually treated her; instead, Breuer saw the patient.

Therefore, O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.

To learn more Psychology, refer to the link:

https://brainly.com/question/29436774

#SPJ5

Answer:

Decreasing

Hope this helps! :)

Answer:

The displacement is 6.4m

Explanation:

Step one:

given

we are told that Lucy runs 4 meters to the east,

then 5 meters south.

let the distance east be the displacement in the x-direction, and south be the y-direction

Step two:

The resultant of the x and y displacement is the magnitude of the total displacement z

applying Pythagoras theorem we have

z=√x^2+y^2

z=√4^2+5^2

z=√16+25

z=√41

z=6.4m

Answer:25 N

Explanation:

in the case shown below, the 1 kg rock rides on a horizontal disk that rotates at constant speed 5m/s is 25N

Speed is the ratio of distance with respect to the time in which the distance was covered. Speed is a scalar quantity as it does not have magnitude only have direction

The formula of speed can be represented as s=d/t, Where, s is the speed in m.s-1, d is the distance traveled in m, t is the time taken in s

Uniform speed is defined when the object covers equal distance at equal time intervals, variable speed is defined as when the object covers a different distance at equal intervals of times.

Average speed is defined as the total distance travelled by an object to the total time taken by the object.

Instantaneous speed is defined as when the object is move with variable speed, then the speed at any instant of time is known as instantaneous speed.

For more details regarding speed, visit

brainly.com/question/13263542

#SPJ5

Answer:

2008

Explanation:

2000+3+5======2008

Answer:

[tex]8\hat i-2\hat j-2\hat k[/tex]

Explanation:

Vectors in 3D

Given a vector

[tex]\vec P = P_x\hat i+P_y\hat j+P_z\hat k[/tex]

A vector [tex]\vec Q[/tex] parallel to [tex]\vec P[/tex] is:

[tex]\vec Q = k.\vec P[/tex]

Where k is any constant different from zero.

We are given the vectors:

[tex]\vec A = \hat i+4\hat j-2\hat k[/tex]

[tex]\vec B = 3\hat i-5\hat j+\hat k[/tex]

It's not specified what the 'resultant' is about, we'll assume it's the result of the sum of both vectors, thus:

[tex]\vec A +\vec B = \hat i+4\hat j-2\hat k + 3\hat i-5\hat j+\hat k[/tex]

Adding each component separately:

[tex]\vec A +\vec B = 4\hat i-\hat j-\hat k[/tex]

To find a vector parallel to the sum, we select k=2:

[tex]2(\vec A +\vec B )= 8\hat i-2\hat j-2\hat k[/tex]

Thus one vector parallel to the resultant of both vectors is:

[tex]\mathbf{8\hat i-2\hat j-2\hat k}[/tex]

Answer:

options B,C,D are true

Explanation:

Split up the forces into components acting parallel to and perpendicular to the slope. See the attached picture for the reference axes.

The box stays on the surface of the plane, so that the net force acting perpendicular to it is 0, and the only acceleration is applied in the parallel direction.

Let m be the mass of the box, θ the angle the plane makes with the ground, and a the acceleration of the box. By Newton's second law, we have

• net parallel force

∑ Force (//) = W (//) - F = m a

(that is, the net force in the parallel direction is the sum of the parallel component of the weight W and the friction F which acts in the negative direction)

• net perpendicular force

∑ Force (⟂) = W (⟂) + N = 0

Notice that

W (//) = W sin(θ) … … … which is positive since it points down the plane

W (⟂) = -W cos(θ) … … … which is negative since it points opposite the normal force N

So the equations become

W sin(θ) - F = m a

-W cos(θ) + N = 0

Solving for a gives

a = (W sin(θ) - F ) / m

which is good enough if you know the magnitude of the friction force.

If you don't, you can write F in terms of the coefficient of kinetic friction between the box and plane, µ, as

F = µ N

so that

a = (W sin(θ) - µ N ) / m

and the normal force itself has a magnitude of

N = W cos(θ)

so that

a = (W sin(θ) - µ W cos(θ) ) / m

The weight W has magnitude m g, where g is the magnitude of the acceleration due to gravity, so

a = (m g sin(θ) - µ m g cos(θ) ) / m

a = g (sin(θ) - µ cos(θ))

Answer:

HOPE IT HELPS.....

Explanation:

The legal standard for drunkenness across the United States ranges from 0.10 to 0.08. If a person's BAC measures 0.08, it means that there are 0.08 grams (i.e., 80 mg) of alcohol per 100 ml of blood. The American Medical Association says that a person can become impaired when the blood alcohol level hits 0.05.

Answer: 0.08

Driving While Intoxicated or Impaired is Illegal

Under Michigan law, it is illegal to drive: While intoxicated, or impaired, by alcohol, controlled substance, or other intoxicating substance. With a bodily alcohol content of 0.08 or more. (This crime is one of the driving while intoxicated offenses.)

Hope this helps... Stay safe and have a Merry Christmas!!!!!!!! :D

Answer:

Fx = 467.65N

Fy = 270N

Explanation:

Given

Force = 540N

angle of inclination = 40 degree

Horizontal component Fx = Fcos 30

Fx = 540cos30

Fx = 540(0.8660)

Fx = 467.65N

Hence the horizontal component is 467.65N

Vertical component Fy = Fsin 30

Fy = 540sin30

Fy = 540(0.5)

Fy = 270N

Hence the vertical component is 270N

Answer:

A) 2.650 km

Explanation:

The relationship between acceleration of gravity and gravitational constant is:

[tex]g = \frac{Gm}{R^2}[/tex] ---- (1)

Where

[tex]R = 6,400 km[/tex] -- Radius of the earth.

From the question, we understand that the gravitational field of the rocket is 50% of its original value.

This means that:

[tex]g_{rocket} = 50\% * g[/tex]

[tex]g_{rocket} = 0.50 * g[/tex]

[tex]g_{rocket} = 0.5g[/tex]

For the rocket, we have:

[tex]g_{rocket} = \frac{Gm}{r^2}[/tex]

Where r represent the distance between the rocket and the center of the earth.

Substitute 0.5g for g rocket

[tex]0.5g = \frac{Gm}{r^2}[/tex] --- (2)

Divide (1) by (2)

[tex]\frac{g}{0.5g} = \frac{Gm}{R^2}/\frac{Gm}{r^2}[/tex]

[tex]\frac{g}{0.5g} = \frac{Gm}{R^2}*\frac{r^2}{Gm}[/tex]

[tex]\frac{1}{0.5} = \frac{1}{R^2}*\frac{r^2}{1}[/tex]

[tex]2 = \frac{r^2}{R^2}[/tex]

Take square root of both sides

[tex]\sqrt 2 = \frac{r}{R}[/tex]

Make r the subject

[tex]r = R * \sqrt 2[/tex]

Substitute [tex]R = 6,400 km[/tex]

[tex]r = 6400km * \sqrt 2[/tex]

[tex]r = 6400km * 1.414[/tex]

[tex]r = 9 049.6\ km[/tex]

The distance (d) from the earth surface is calculated as thus;

[tex]d = r - R[/tex]

[tex]d = 9049.6\ km - 6400\ km[/tex]

[tex]d = 2649.6\ km[/tex]

[tex]d = 2650\ km[/tex] --- approximated

Answer:

The location of the center of gravity of the fourth mass is [tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex].

Explanation:

Vectorially speaking, the center of gravity with respect to origin ([tex]\vec r_{cg}[/tex]), measured in meters, is defined by the following formula:

[tex]\vec r_{cg} = \frac{m_{1}\cdot \vec r_{1}+m_{2}\cdot \vec r_{2}+m_{3}\cdot \vec r_{3}+m_{4}\cdot \vec r_{4}}{m_{1}+m_{2}+m_{3}+m_{4}}[/tex] (1)

Where:

[tex]m_{1}[/tex], [tex]m_{2}[/tex], [tex]m_{3}[/tex], [tex]m_{4}[/tex] - Masses of the objects, measured in kilograms.

[tex]\vec r_{1}[/tex], [tex]\vec r_{2}[/tex], [tex]\vec r_{3}[/tex], [tex]\vec r_{4}[/tex] - Location of the center of mass of each object with respect to origin, measured in meters.

If we know that [tex]\vec r_{cg} = (0,0)\,[m][/tex], [tex]\vec r_{1} = (0,0)\,[m][/tex], [tex]\vec r_{2} = (0, 4.1)\,[m][/tex], [tex]\vec r_{3} = (1.9,0.0)\,[m][/tex], [tex]m_{1} = 6\,kg[/tex], [tex]m_{2} = 1.5\,kg[/tex], [tex]m_{3} = 4\,kg[/tex] and [tex]m_{4} = 7.9\,kg[/tex], then the equation is reduced into this:

[tex](0,0) = \frac{(6\,kg)\cdot (0,0)\,[m]+(1.5\,kg)\cdot (0,4.1)\,[m]+(4.0\,kg)\cdot (1.9,0)\,[m]+(7.9\,kg)\cdot \vec r_{4}}{6\,kg+1.5\,kg+4\,kg+7.9\,kg}[/tex]

[tex](6\,kg)\cdot (0,0)\,[m]+(1.5\,kg)\cdot (0,4.1)\,[m]+(4\,kg)\cdot (1.9,0)\,[m]+(7.9\,kg)\cdot \vec r_{4} = (0,0)\,[kg\cdot m][/tex]

[tex](7.9\,kg)\cdot \vec r_{4} = -(6\,kg)\cdot (0,0)\,[m]-(1.5\,kg)\cdot (0,4.1)\,[m]-(4\,kg)\cdot (1.9,0)\,[m][/tex]

[tex]\vec r_{4} = -0.759\cdot (0,0)\,[m]-0.190\cdot (0,4.1)\,[m]-0.506\cdot (1.9,0)\,[m][/tex]

[tex]\vec r_{4} = (0, 0)\,[m] -(0, 0.779)\,[m]-(0.961,0)\,[m][/tex]

[tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex]

The location of the center of gravity of the fourth mass is [tex]\vec r_{4} = (-0.961\,m,-0.779\,m)[/tex].

Answer:

The distance is 0.96m

Explanation:

Given

m1= 900kg

m2= 1600kg

Force F= 0.0001nN

G=6.67430*10^-11 Nm^2/kg^2

Required

The distance r

Step two:

the formula for the force is given as

F = Gm1m2/r2

make r subject of the formula

[tex]r= \sqrt{\frac{Gm1m2}{F} }[/tex]

[tex]r= \sqrt{\frac{6.67430*10^-11*900*1600}{0.0001} }\\\\r= 0.00009610992/0.0001`}\\\\r= 0.96m[/tex]

Answer:

The distance is 0.96m

Explanation:

Given

m1= 900kg

m2= 1600kg

Force F= 0.0001nN

G=6.67430*10^-11 Nm^2/kg^2

Required:

The distance r

Step two:

the formula for the force is given as

F = Gm1m2/r2

make r subject of the formula

[tex]r= \sqrt{\frac{Gm1m2}{F} }[/tex]

[tex]r= \sqrt{\frac{6.67430*10^-11*900*1600}{0.0001} }\\\\r= 0.00009610992/0.0001`}\\\\r= 0.96m[/tex]

Answer:

The distance between the compact car and pickup truck is 0.96048 m

Explanation:

The gravitational force is directly proportional to the product of the masses of the interacting object, it is also inversely proportional to the square of the distance between them.  This is shown in equation 1;

[tex]F =G \frac{m_{1} X m_{2} }{d^{2} }[/tex]............ 1

Where F is the gravitational force = 0.0001 N

G is the gravitational constant = 6.673 x [tex]10^{-11} Nm^{2} kg^{-2}[/tex]

[tex]m_{1}[/tex]  is the mass of the compact car = 900kg

[tex]m_{2}[/tex] is the mass of the pickup truck = 1600kg

d is the distance and its unknown ?

Let us make d the subject formula in equation 1

[tex]d = \sqrt{G\frac{m_{1} m_{2} }{F } }[/tex] .... 2

Substituting into equation 2 we have

[tex]d = \sqrt{\frac{6.673x10^{-11} x 900 x 1600}{0.0001N} }[/tex]

d = 0.96048m

Therefore the distance between the compact car and pickup truck is 0.96048 m

Answer:

1.898 × 10^27 kg

Explanation:

thats how much it ways

Ans    4 more to be exact

Explanation:

Given values are:

Spring constant,

and,

The force will be:

→ [tex]F = kx[/tex]

By substituting the values, we get

      [tex]= 40\times 10[/tex]

      [tex]= 400 \ N[/tex]

Thus the above answer is right.

Learn more about spring constant here:

https://brainly.com/question/15277652

Answer:

in a spontaneous process, the entropy of the universe increases.

Explanation:

Entropy is a measure of of the degree of  randomness or disorderliness in a system.

The second law of thermodynamics can be stated as follows; "in any spontaneous process, the entropy of the universe increases."  

The universe here refers to the system's disorder and the disorder of the surroundings.  Therefore, a spontaneous process can occur, in which the entropy of the system decreases, only if the entropy increases in the surroundings.

For instance, when ice freezes, the entropy of liquid water decreases, that is, the entropy of the system decreases. However, heat is given off to the surroundings and the entropy of the surroundings increases. This is an obvious expression of this law.

Answer:

light refraction

Explanation:

Increase of momentum of the collision will have the car in a unsettling position, creating an unsettling spot for it. Moreover increasing this would most likely take worse effect, it is better than increasing the time, which will only create the car faster. Let me show you what I mean...