a child is riding in a wagon. what reference point might have been used if an observer said the child was not moving?

The resistance of the battery if a current of 23A flows through a circuit and the battery produces a potential difference of 9V is 0.39 ohms.

Resistance is the force that tends to oppose motion. It is measured in ohms. The resistance of a battery can be calculated using the following formula;

V = IR

Where;

According to this question, a current of 23A flows through a circuit and the battery produces a potential difference of 9V. The resistance can be calculated as follows:

R = V/I

R = 9/23

R = 0.39ohms

Therefore, 0.39ohms is the resistance of the battery.

Learn more about resistance at: https://brainly.com/question/13638869

#SPJ1

The density of block A and block B is 500 kg/m^3 and 1500 kg/m^3 respectively and the tension of the string is mg.

To find: The density of 2 masses and Tension of the string

What is meant by density ?

Mass of block A=m and Mass of block B= 3m.

Let V represent the volume of the block, ρ represents the water density, and ρ1 represent the density of block A.

For Block A, V ρ g = T+ V ρ1g……… (1) where T represents the string's tension.

For block B, V ρ g +T= 3V ρ1g……… (2)

Adding (1) and (2), we get

2V ρ g = 4V ρ1 g

ρ1 = ρ/2 = 1000/2 =500 Kg m^-3

As a result, block A's density is 500 kg/m^3, while block B's density is 1500 kg/m^3.

When we enter these values into (1), we get

V 2ρ1 g = T+ V ρ1g

T = V ρ1 g = mg

To learn more about density refer to

https://brainly.com/question/26364788

#SPJ4

By a factor of 9, the Kinetic energy rises.

To learn more about Kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ1

A homogeneous electrostatic force of strength 564 N/C is initially present around two substances, an electrons and a proton. if the atoms and molecules are unrestrained.

According to our inquiry, a electron as well as a proton will attract one another with a electrical force of equal strength when they are placed in a magnetic field because of their opposing polarities. However, because of their opposing charges, the force will act in the opposite direction.

Proton, electron, and an antineutrino do not make up a neutron. These particles are simply byproducts of its decay. One up quark, two down quarks, and numerous "intermediary particles" known as gluons, that carry a interaction between the quarks, make up a neutron.

To know more about electrostatic visit:

https://brainly.com/question/14889552

#SPJ4

a) The total time in air is 34.1 s

b) The maximum height is 1428 m

c) The horizontal distance is 6343 m

d) The velocity after 5 s is 299 m/s

Let us note that the projectile has to do with any object that is moving along a parabolic path.

a) Time of flight = 2usinθ/g

u = initial velocity

g = acceleration due to gravity

θ = angle of projection

T = 2 * 250 sin 42/9.8

= 34.1 s

b) H = v^2sin^2θ/2g

H = (250)^2 sin^2(42)/2(9.8)

H = 27983/19.6

H  = 1428 m

c) R = v^2 sin2θ/g

R = (250)^2sin 2(42)/9.8

R = 6343 m

d) v = u + gt

v = 250 + (9.8 * 5)

v = 299 m/s

Learn more about  velocity:https://brainly.com/question/18084516

#SPJ1

The ratio of the output force exerted by the last machine in the series divided by the input force applied to the first machine is the mechanical advantage of a compound machine.

A machine is a physical system that use power to exert forces, regulate movement, and carry out an action.

A compound machine is a device made up of several simple machines connected in series, each of which serves as the input force for the others. A simple gear train is made up of several gears (wheels and axles) connected in series, just like a bench vise is made up of a lever (the vise's handle) and a screw.

The product of the mechanical advantages of the series of basic machines that make up the compound machine equals the mechanical advantage of the compound machine.

Learn more on compound machine here https://brainly.com/question/17712403

#SPJ1

The constant vertical acceleration provided by the deflector is a = 1.11 * 10^6 m/s^2.

The rate of change of velocity is called acceleration. Acceleration means that the speed is changing, but not always.

y = vi*t + (1/2)at^2

Where y is vertical displacement, vi is  initial vertical velocity, t is time of travel, and a is the constant acceleration.

So, y = (1/2)at^2

Given, vertical displacement of the electron (y = 40.0 cm)

x = vt

x is the horizontal displacement and v is  horizontal velocity.

So, t = x/v

t = (17.0 cm) / (3.0 x 106 m/s) = 5.67 x 10^-8 s

y = (1/2)(a)(t)^2

a = 2y/t^2

a = 2(40.0 cm) / (5.67 x 10^-8 s)^2

So, the acceleration provided by the deflector is a = 1.11 * 10^6 m/s^2.

To know more about acceleration, refer

https://brainly.com/question/460763

#SPJ4

The ball is thrown straight up into the air, its acceleration is -9.8 m/s²(upwards).

A measure of how quickly an object's velocity changes is called acceleration. It has both a direction and a magnitude because it is a vector quantity. The magnitude of acceleration is measured in units of meters per second squared (m/s²) or feet per second squared (ft/s²). The direction of acceleration is the direction of the change in velocity.

Positive acceleration and negative acceleration are the two different types of acceleration. Positive acceleration occurs when an object's speed increases, and negative acceleration occurs when an object's speed decreases.

As the ball is thrown straight up into the air, it initially accelerates upward due to the force of the throw. As it moves upward, it eventually reaches its maximum height and begins to fall back down to the ground.

The acceleration of the ball as it moves upward is equal to the force of gravity acting on it, which is 9.8 m/s², but in the opposite direction. The direction of acceleration is opposite to the direction of velocity, so the acceleration is upward, but negative. 9.8 m/s² is the magnitude of the acceleration.

So, as the ball is thrown straight up into the air, its acceleration is -9.8 m/s² (upwards).

To know more about change in velocity, visit:

https://brainly.com/question/13850072

#SPJ4

The second kinematic equation (vf = vi + at) is used to calculate the final velocity of an object based on its initial velocity and acceleration.

It cannot be used to calculate the height of an object since it does not take into account the vertical displacement of the object. To calculate the height of an object, you must use the first kinematic equation (y = yi + vi*t + 1/2*a*t^2).

The study of motion in a system of bodies is called kinematics, which does not directly take into account the forces or potential fields influencing the motion. In other terms, kinematics investigates the distribution of momentum and energy among interacting bodies.

To know more about kinematics here

https://brainly.com/question/7590442

#SPJ4

Two objects moved to 1/3 of the original distance.The new new force if the original force was 45 Newtons is 405 newton.

Force is a physical quantity that describes how two or more objects interact with one another. It has magnitude and direction because it is a vector quantity.

A push or pull on an object is a common way to describe force. It has the ability to accelerate, change direction, or alter an object's size or shape. There are two primary categories of forces: non-contact and contact forces.

Newton (N) is the standard force unit in the International System of Units (SI). The force required to accelerate a mass of one kilogram at a rate of one meter per second squared is referred to as one Newton.

The British system uses the pound-force (lbf), the CGS system uses the dyne, and the Metric system uses the kilopond (kp).

The new force F2 is given by:

F2 = F1 × (d1^2 / d2^2)

F2 = 45 N × (d1^2 / (1/3d1)^2)

F2 = 45 N × (d1^2 / (1/9d1^2))

F2 = 45 N × 9d1^2 / (1/9d1^2)

F2 = 45 N × 9

F2 = 405 N

So, the new force is 405 Newtons.

To know more about vector quantity :

brainly.com/question/774036

#SPJ4

(a) The time for the sphere A to hit the floor is 0.5 second.

(b) The time for the sphere B to hit the floor is 0.5 second

(c) The distance travelled by sphere A from the edge of the table is 1.75 m.

(d) The distance travelled by sphere B from the edge of the table is 0.75 m.

The time of motion of sphere A is calculated by applying the following formula.

t = √ ( 2h / g )

where;

t = √ ( 2 x 1.2 / 9.8 )

t = 0.5 second

The time of motion of sphere B is calculated as;

t = √ ( 2 x 1.2 / 9.8 )

t = 0.5 second

The distance travelled by sphere A from the edge of the table is calculated as;

d = vt

where;

d = 3.5 m/s  x 0.5 s

d = 1.75 m

The distance travelled by sphere B from the edge of the table is calculated as;

d = 1.5 m/s  x  0.5 s

d = 0.75 m

Learn more about horizontal distance here: https://brainly.com/question/24784992

#SPJ1

Size: large, drop height: 1 metre, surface: hard floor, and size: large, drop height: 10 metres, surface: hard floor are the two trials that would allow a researcher to examine the influence of increasing drop height upon the force experienced by the egg.

Since the goal of the experiment is to understand how a difference in mass (or size) can impact the force that the egg experiences, It means that the other points of measurement should remain the same and only the size should change. Therefore, the Trials that would enable an experimenter to ascertain the impact of increasing drop height on the force felt by the egg under two sets of experimental conditions are size: large, drop height: 1 metre, and surface: hard.

Learn more about Trials

brainly.com/question/18150840

#SPJ4

Using principles in Physics the way in which air bags can reduce the chance of death or injury is that the airbag increases the time over which the velocity of the head changes so that the acceleration is reduced, and thus the force is reduced.

This is referred to as a vehicle occupant-restraint system using a bag designed to inflate extremely quickly, then quickly deflate during a collision.

The gas in the bag can only leave at a certain rate which makes it deflates slowly, and the time duration of the deceleration increases which therefore leads to the force being reduced during a collission and reduces the risk of injury.

Read more about Airbag here https://brainly.com/question/2607849

#SPJ1

Celestial bodies known as astronomical bodies are those that exist naturally in the cosmos. Earth, the solar system, the Milky Way galaxy, the local group, the Virgo cluster, and the cosmos are the things in order of smallest to biggest size.

How do heavenly objects work?

Celestial objects are celestial bodies that are naturally occuring and have a variety of dimensions, masses, distances, and atmospheres. The collection of other celestial objects in it contains the universe as its biggest member.

The neighborhood cluster of galaxies known as Virgo or the local super cluster is made up of a large number of galaxies. The cluster that houses the solar system is called the Milky Way galaxy.

The region of the galaxy that contains astronomical objects like the Sun, planets, stars, moon, etc. is known as the solar system. One of the planets in a solar system is Earth.

The universe, earth, solar system, milky way galaxy, local group, and Virgo cluster are therefore the astronomical objects in order of size.

For such more question on Celestial bodies

https://brainly.com/question/18193521

#SPJ4

Note: The correct question would be as bellow,

Put the following astronomical objects and bodies in order from smallest to largest

1. solar system

2. Milky Way Galaxy

3. universe

4. Virgo cluster

5. Earth

6. Local Group

The mass of the stone is 0.38 kg. The result is obtained by using the formula for kinetic energy.

Kinetic energy is the energy of an object due to its motion. The kinetic energy can be expressed as

KE = ½ mv²

Where

A stone is thrown vertically up. It has

Find the mass of the stone!

Using the formula for kinetic energy, we will get the mass.

KE = ½ mv²

37 = ½ m(14)²

37 = ½ m(196)

37 = 98m

m = 0.38 kg

Hence, the stone has a mass of 0.38 kg.

Learn more about kinetic energy here:

brainly.com/question/19891482

#SPJ4

The given statement 'The first law of thermodynamics states firmly that energy is a thermodynamic property' is a true statement because conservation of energy takes place.

Just like mass, energy is always conserved i.e, it can only be changed from one form to another; it cannot be created or destroyed. The term internal energy refers to the kinetic and potential energy that is associated with the system's molecules and is defined as a thermodynamic feature of the system.

Numerous energy transfers and conversions occur after any change in a system caused by the interaction of heat, work, and internal energy. However, there is no net change in the total amount of energy during these exchanges.

To know more about thermodynamics:

https://brainly.com/question/23517978

#SPJ4

1) Because the moon Pandora is smaller than the Earth, it is likely to have a weaker gravitational pull and a thinner atmosphere. This means that heavier objects, like people, would be able to fly and jump higher than on the Earth.

2) No, there was no evidence of this difference in the movie. If there was, the characters should have been seen flying or jumping higher than what is normal on Earth.

3) In the movie, one of the characters is able to fly while holding onto a large tree branch. This violates the law of physics, as the branch should not be able to remain afloat due to its size and weight.

4) The Na'vi aliens have some traits that make them too similar to humans and animals on Earth. These traits include having two eyes, a humanoid shape, and speaking a language. They also have animals that are similar to those found on Earth, such as horses, birds, and dogs.

What is gravitional pull?

Gravitational pull is the force of attraction between objects that have mass. It is the force that keeps us on the ground and keeps the planets in orbit around the sun. It is a fundamental force of nature that is caused by the interaction between two objects with mass.

To learn more about gravitional pull

Here: https://brainly.com/question/28854345

#SPJ1

The initial velocity of the ball would be 14.7 m/s.

Initial velocity is the speed and direction of an object at the start of its motion. It is a vector quantity, meaning it has both magnitude (the speed) and direction. Initial velocity is usually denoted by the letter v, with an arrow above it to indicate its direction.

The speed with which the ball player threw the ball can be calculated using the equation v = √2gh,
where v is the initial velocity,
g is the acceleration due to gravity (9.8 m/s2), and
h is the height from which the ball was thrown.
In this case, h = 3.46 s, so the initial velocity of the ball would be v = √2(9.8)(3.46) = 14.7 m/s.

To learn more about initial velocity
https://brainly.com/question/19365526
#SPJ4

The magnitude of the electric field when it is located at a distance of 4.0 mm from the symmetry axis is 4.5 N/C

The absolute or relative direction or size of an object's motion in the sense of motion can be used to define magnitude. It is extensively utilized to convey something's size or scope. In physics, the term "magnitude" typically means "distance" or "quantity."

The charge density = 80 nC/m3.

The inner radius, r' = 1 mm

The outer radius, r'' = 3 mm

distance,  r = 4 mm

The linear charge density is given by

λ = ρ π ( r"²- r²).

λ = 80 ×10⁻⁹  × 3.14 ×  10 ⁻⁶× (9-1).

λ = 2 × . 10⁻¹²

The electric field is given by,

E = λ/4πe0r.

E = 4.5 N/C.

Therefore, the magnitude of the electric field at a point that is 4.0 mm from the symmetry axis is found to be 4.5 N/C.

Learn more about electric field:

brainly.com/question/19878202

#SPJ4

The a body has been thrown upwards then there would be Decreasing Ug. Option B

If we are talking about the free fall, let us bear in mind that we have to know that this is the situation where the object would be falling freely under the influence of gravity.

We must note that the acceleration due to gravity would cause the object to move at a constant velocity as the object is falling freely on the surface of the earth. The value of the acceleration due to gravity would be decreasing as the object is moving upwards.

Learn more about free fall:https://brainly.com/question/13299152

#SPJ1

Physical and chemical qualities are present in all matter.

Physical qualities, such as mass, color, and volume, are characteristics that may be measured by scientists without modifying the makeup of the sample being studied (the amount of space occupied by a sample).

Chemical characteristics, such as flammability and susceptibility to corrosion, define a substance's distinctive capacity to reacted to generate new substances. A pure substance's chemical and physical properties are the same in all samples.

Extensive or intensive physical properties are both possible. The substance's extensive attributes, such as mass, weight, and size, change with the amount present.

Therefore, Physical and chemical qualities are present in all matter.

To learn more about Physical property, refer to the link:

https://brainly.com/question/18327661

#SPJ1

Compare the amount of time needed is for projectile to go from its initial velocity to its highest point. (A) for a resistive force of zero.

A number called velocity describes the speed and direction of a point's motion. Because it has both direction and magnitude, velocity is referred to as a linear momentum and cannot be fully expressed in numerical terms, unlike time or length, that are scalar numbers.

According to the equation v = s/t, velocity (v) is indeed a vector quantity which quantifies displacement (and change in position, s), over change in time (t).

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

Dark matter is a hypothetical form of matter that is thought to make up approximately 85% of the total matter in the universe.

What is dark matter and where does it reside?

It is called "dark" because it does not emit, absorb, or reflect any electromagnetic radiation, making it invisible to telescopes.

It is believed that dark matter resides in the halo of our galaxy, which is a large, spherical region that surrounds the galaxy. It is also thought to be present in galaxy clusters and in the large-scale structure of the universe.

Dark matter and dark energy are mysterious because they cannot be directly observed through telescopes or other instruments. They are detected only through their gravitational effects on visible matter, such as the rotation of galaxies and the expansion of the universe.

Dark matter and dark energy are important because they play a crucial role in the formation and evolution of structure in the universe. The gravitational pull of dark matter is thought to be responsible for the formation of galaxies and galaxy clusters, while dark energy is thought to be driving the accelerated expansion of the universe.

Understanding the properties and behavior of dark matter and dark energy is a major focus of current research in cosmology and astrophysics.

To learn more about dark matter:

https://brainly.com/question/28256017

#SPJ1

The term is used to describe the continuous heating and cooling of magma within the mantle Convection currents.

The heat from the earth's core and the mantle causes convection currents to form in the mantle. Mantle material rises in hot columns slowly. The hotter material spreads out at the top of the asthenosphere and pushes the cooler material aside. The mantle receives this cooler substance once more.

Earth's interior is made up primarily of the mantle, which is solid. The Earth's thin outer layer, the crust, and its dense, extremely hot core are separated by the mantle. The mantle makes up a staggering 84% of the total volume of the Earth and is roughly 2,900 kilometers (1,802 miles) thick.

To know more about Convection currents visit :

https://brainly.com/question/29763773

#SPJ4

When the mantle moves, heat is transferred from the blazing core to the brittle lithosphere, a process known as mantle convection.

To learn more about "mantle convection" refer

https://brainly.com/question/13288945

#SPJ4

Answer:

In order to determine the voltmeter reading in this experiment, we need to use Ohm's Law, which states that the current in a circuit is directly proportional to the voltage and inversely proportional to the resistance. The equation is:

V = I * R

Where:

V = voltage (measured in volts)

I = current (measured in amperes)

R = resistance (measured in ohms)

Given that the ammeter reading was 0.75 A and the resistance of resistor R was 160 ohms, we can substitute these values into the equation:

V = 0.75 A * 160 ohms

V = 120 V

Therefore, the voltmeter reading is 120 V.

A motor requires 400 joules of energy to lift a 5. 0 kg mass 2. 0 meters. The efficiency of this motor is 25%.

What is meant by energy ?

To learn more about energy  refer to

https://brainly.com/question/13881533

#SPJ4

The total potential energy of an object that is 20 ft below a datum level at a location where g = 31.7 ft/s², and which has a mass of 100 lbm is 2.53  Btu.

Potential energy is the power that an object can store as a result of its position in relation to other objects, internal tensions, electric charge, or other circumstances. Potential energy is denoted mathematically as:

PE = m x g x h

Where,

m = mass of the object (kg)

g = acceleration due gravity

h = height

We must calculate an object's total potential energy in British thermal units (Btu)

Hence,

PE = 100 x 31.7 x 20 (1 / 25037) btu

= 2.5322 btu

The question is incomplete, it should be:

Calculate the total potential energy, in Btu, of an object that is 20 ft below a datum level at a location where g = 31.7 ft/s², and which has a mass of 100 lbm.

Learn more about potential energy here: https://brainly.com/question/14427111

#SPJ4

The intensity of the rays of sun does not fall uniformly across the surface of the earth. In large part, this is driven by latitude and season.

There is a relationship between latitude and temperature across the world, as typically temperatures are warmer approaching the Equator while cooler approaching the Poles. There exist variations, though, as other factors such as ocean currents, elevation, and precipitation affect climate patterns.

As a result latitude and season make the intestity of the sun ray's to fall nonuniformly all around the globe.

You can learn more about latitude at

https://brainly.com/question/28173702

#SPJ4

The y component of the electric field is -5.17e-4 N/C.

Electric field is a physical quantity that is used to describe the force exerted on a charged particle by an electric field. It is a vector quantity that can be measured in newtons per coulomb (N/C). Electric field is created by a stationary charge, which can be either a positive or negative charge.

The electric field at any given point is determined by Coulomb's Law. The formula for Coulomb's law is
E = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the two charges, and r is the distance between them.
In this case, q1 is the point charge and q2 is a test charge at the given coordinates. The distance between them is given by the Pythagorean theorem: r = sqrt((-9.88)^2 + (6.11)^2) = 10.90 m.
Plugging all of this into the formula, we get
E = 9e9 * (0.00874 * 1) / (10.90)^2 = 8.05e-4 N/C
The electric field is a vector, so we must also calculate the direction. The electric field points away from the point charge, so we can use the direction of the vector from the point charge to the test charge to determine the direction of the electric field. The direction is determined by arctan(6.11/-9.88) = -0.6358 radians.
Thus, the electric field vector can be written as (8.05e-4 * cos(-0.6358), 8.05e-4 * sin(-0.6358)) = (-7.46e-4, -5.17e-4) N/C.
The y component of the electric field is -5.17e-4 N/C.

To learn more about electric field
https://brainly.com/question/14372859
#SPJ4

The frequency of the infrared light is 4.6 × 10¹² Hz. The result is obtained by using the formula for frequency.

The formula for the frequency of a light is

f = c/λ

Where

Infrared light is the band of the electromagnetic radiation spectrum with the wavelength between 780 nm to 1.300 nm.

When it is converted to mm, it would be

0.70 mm - 1.3 mm

An infrared light has a wavelength of 6.5 × 10⁻⁵ m. (The most possible unit).

The frequency would be

f = c/λ

f = (3 × 10⁸)/(6.5 × 10⁻⁵)

f = (3 × 10⁸)/(6.5 × 10⁻⁵)

f = 0.46 × 10¹³ Hz

f = 4.6 × 10¹² Hz

Hence, the frequency of the infrared light is 4.6 × 10¹² Hz.

Learn more about frequency of light here:

brainly.com/question/13104367

#SPJ4